Scribd Logo
Upload

Welcome to Scribd!

  • 191 views

    1095 Truck Technical Specification For Procurement of Truck

    Uploaded by

    Pradeep Acharya
    [1] The technical specification document outlines requirements for a right-hand drive truck suitable for driving in Nepal with an altitude up to 2,500 meters and ambient temperatures between -5 to 50 degrees Celsius. [2] Key engine specifications include a turbocharged intercooled diesel engine producing over 110 horsepower and 330 Nm of torque. [3] Emissions must meet Nepal's Euro III standard. [4] Additional requirements include a 5-speed manual transmission, semi-elliptical leaf springs, a 190-liter fuel tank, and one-year warranty.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    1095 Truck Technical Specification For Procurement of Truck

    Uploaded by

    Pradeep Acharya
    191 views2 pages
    [1] The technical specification document outlines requirements for a right-hand drive truck suitable for driving in Nepal with an altitude up to 2,500 meters and ambient temperatures between -5 to 50 degrees Celsius. [2] Key engine specifications include a turbocharged intercooled diesel engine producing over 110 horsepower and 330 Nm of torque. [3] Emissions must meet Nepal's Euro III standard. [4] Additional requirements include a 5-speed manual transmission, semi-elliptical leaf springs, a 190-liter fuel tank, and one-year warranty.

    Original Title

    1095 Truck Technical Specification for Procurement of Truck.docx

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    [1] The technical specification document outlines requirements for a right-hand drive truck suitable for driving in Nepal with an altitude up to 2,500 meters and ambient temperatures between -5 to 50 degrees Celsius. [2] Key engine specifications include a turbocharged intercooled diesel engine producing over 110 horsepower and 330 Nm of torque. [3] Emissions must meet Nepal's Euro III standard. [4] Additional requirements include a 5-speed manual transmission, semi-elliptical leaf springs, a 190-liter fuel tank, and one-year warranty.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    191 views2 pages

    1095 Truck Technical Specification For Procurement of Truck

    Uploaded by

    Pradeep Acharya
    [1] The technical specification document outlines requirements for a right-hand drive truck suitable for driving in Nepal with an altitude up to 2,500 meters and ambient temperatures between -5 to 50 degrees Celsius. [2] Key engine specifications include a turbocharged intercooled diesel engine producing over 110 horsepower and 330 Nm of torque. [3] Emissions must meet Nepal's Euro III standard. [4] Additional requirements include a 5-speed manual transmission, semi-elliptical leaf springs, a 190-liter fuel tank, and one-year warranty.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Technical Specification for Truck

    S.N Criteria Requirement Offered


    Specification
    1 Right Hand Drive model Truck suitable for driving in Nepal at an altitude
    upto 2500 meter and in ambient temperature -5 to 50 degree
    General centigrade. Gross Vehicle Weight of the Vehicle shall be minimum
    10200 kg.
    Wheelbase should be max. 3520mm. &Seating Capacity for at least 2
    persons including driver.
    2 Engine Turbocharged intercooled diesel Engine, developing maximum rated
    power output not less than 110 HP at governed RPM with torque min.
    330 Nm @ governed RPM, engine fully equipped with accessories for
    efficient full load operation of the vehicle at operating conditions, heavy
    duty fuel filter.

    3 Emission The Emission Standard of the Vehicle should be “Nepal vehicle Mass
    Standard Emission Standard, 2069 (Euro III)” which is to be certified by
    Department of Transport Management, Nepal.
    4 Clutch 310 mm Dia
    5 Transmission Manual shift at least 5 forward & one reverse.
    6 Suspension Semi Elliptical Leaf springs at front and rear with shock absorbers
    7 Ground Minimum 220 mm.
    Clearance
    8 Fuel Tank Min. 190 ltrs
    capacity
    9 Tires 8.25 x 16 -16 PR
    10 Steering Power Steering with Tiltable and Telescopic available
    11 Grade ability Min. 24%
    12 Brakes Dual Circuit , full air S cam
    13 Cab 2 side doors, Tiltable & all metallic cab with insulated roof, front wipers,
    glass windows on doors, through ventilation, comfortable seats for
    driver and co-passenger, Floors Mats, rear view mirror and two side view
    mirrors.
    14 Chassis and Steel, Heavy duty suitable for rough road conditions.
    frame
    15 Essential 1. Head light, tail & rear light, reverse light & turn Signals.
    accessories 2. Cabin Lights
    3. Speedometer / Odometer
    4. One Spare Wheel with tyre and tube.
    5. Jack and handle
    6. Seat Belt for Driver and Co-driver.
    16 Instructions All sign & instructions in the vehicle shall be in English
    17 Manuals One Copy of the Operator’s and Owner’s Instructions and maintenance
    manual in English shall be supplied with the vehicle.
    18 Tools A set of tools as required for general maintenance shall be supplied.
    19 Color Standard Color
    20 Proven The vehicle offered shall be under standard production by the
    Performance manufacture for at least one year with performance and fuel
    consumption curve.
    21 Warranty Manufacturer shall provide a minimum of one – year warranty after
    acceptance.
    22 Delivery TRUCK, shall be delivered to: …………………………..

    The major items are indicated by bold and highlighted letters/alphabets/ figures in the technical
    specifications. Non- compliance of these major items will result in non- responsiveness of the the bid
    offer.

    Bidder’s Signature……………………………………. Date: …………………………………..........

    You might also like