Scribd
Upload
101 views3 pages

BSC Association DD

1) The document describes the configuration of a signaling point called BCSRT01 including associating it with stream control transmission protocol (SCTP) endpoints for transport. 2) Routing information is provided for networks NWI-A and NWI-B to route traffic through BCSRT01. 3) BCSRT01 is set as the active point to handle traffic while other points like MSSGN03 are set as inactive.

Uploaded by

Devang Dave
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
101 views3 pages

BSC Association DD

1) The document describes the configuration of a signaling point called BCSRT01 including associating it with stream control transmission protocol (SCTP) endpoints for transport. 2) Routing information is provided for networks NWI-A and NWI-B to route traffic through BCSRT01. 3) BCSRT01 is set as the active point to handle traffic while other points like MSSGN03 are set as inactive.

Uploaded by

Devang Dave
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

!!!! BCSRT01 SP creation!!!!!!!!!!!

C7SPI:SP=3-11434,OWNSP=3-11547 ,NET=IP,LMSG;
C7PNC:SP=3-11434,SPID=BCSRT01;

C7NCP:SP=ALL,SPCHAR;

C7NPI:SP=3-11434;
C7NSI:SP=3-11434,SSN=254;
C7NPC:SP=3-11434,MSG=1,MTC=1;

C7NCP:SP=ALL,SPCHAR;

!!

RRMBI:MSC=BCSRT01,SP=3-11434;

! RLTDC:MSC=BCSRT01,MODE=ACTIVE;

! RLTDC:MSC=MSSGN03,MODE=INACTIVE;

IHCLP:EPID=ALL,SAID=ALL;

IHADI:SAID=SCTP1_BCSRT01,EPID=EP01,RIP="10.140.28.129"&"10.140.28.137",SCTPCP,OS=17
,RPN=2905;

IHADI:SAID=SCTP2_BCSRT01,EPID=EP02,RIP="10.140.28.130"&"10.140.28.138",SCTPCP,OS=17
,RPN=2905;

IHAPC:SAID=SCTP1_BCSRT01,PLIP="10.213.45.2",PRIP="10.140.28.129";
IHAPC:SAID=SCTP2_BCSRT01,PLIP="10.213.45.3",PRIP="10.140.28.130";

IHASC:PROC=ESTB,SAID="SCTP1_BCSRT01",SCTPCP,USER=M3UA;
IHASC:PROC=ESTB,SAID="SCTP2_BCSRT01",SCTPCP,USER=M3UA;

IHCLP:EPID=ALL,SAID=ALL;

! IHAPC:EPID=EP01, AMR=8, OS=17;


! IHAPC:EPID=EP02, AMR=8, OS=17;
M3RSI:DEST=3-11434,SAID=SCTP1_BCSRT01,PRIO=1,BMODE=PEER;
M3RSI:DEST=3-11434,SAID=SCTP2_BCSRT01,PRIO=1,BMODE=PEER;

M3RAi:DEST=3-11434,SAID=SCTP1_BCSRT01;
M3RAI:DEST=3-11434,SAID=SCTP2_BCSRT01;

! M3RAE:DEST=3-11434,SAID=SCTP1_BCSRT01;
! M3RAE:DEST=3-11434,SAID=SCTP2_BCSRT01;

M3ASC:SAID=SCTP1_BCSRT01,PROC=ACT;
M3ASC:SAID=SCTP2_BCSRT01,PROC=ACT;

RRMbC:msc=BCSRT01,CNID=2425;
RRMbp:msc=all;
RRNRI:MSC=BCSRT01,NRI=25;
RRnrp:msc=all;

IHIFP:VIF=ALL;
IHCLP:EPID=ALL,SAID=ALL;

C7SPP:SP=ALL;
C7NCP:SSN=ALL,SP=ALL;

M3RSP:DEST=ALL;
M3ASP;

IHSLP;

rltdp:msc=all;

rltdc:msc=BCSRT01,CAP=0;

m3rsp:Dest=all;

!!! Ping check !!!!!!!

ihnpi:dest=10.140.28.129,cnt=5;
ihnpi:dest=10.140.28.130,cnt=5;
ihnpi:dest=10.140.28.137,cnt=5;
ihnpi:dest=10.140.28.138,cnt=5;

!NWEI Configuration

! Routing in NWI-A !

!configure iproute add 10.140.0.0/23 10.213.41.65 1 vr VR-Default


!configure iproute add 10.140.2.0/23 10.213.41.65 1 vr VR-Default

!configure iproute add 10.140.0.0/23 10.213.41.90 15 vr VR-Default


!configure iproute add 10.140.2.0/23 10.213.41.90 15 vr VR-Default
! Routing in NWI-B !

!configure iproute add 10.140.0.0/23 10.213.41.69 1 vr VR-Default


!configure iproute add 10.140.2.0/23 10.213.41.69 1 vr VR-Default

!configure iproute add 10.140.0.0/23 10.213.41.89 15 vr VR-Default


!configure iproute add 10.140.2.0/23 10.213.41.89 15 vr VR-Default

rltdp:msc=all;
rltdc:msc= MSSRJ01 ,cap= 7 ;
rltdc:msc= MSSRJ02 ,cap= 10 ;
rltdc:msc= MSSGN04 ,cap= 7 ;
rltdc:msc= MSSGN03 ,cap= 0 ;
rltdc:msc= BCRAJ01 ,cap= 77 ;
rltdc:msc= BCRAJ02 ,cap= 77 ;
rltdc:msc= BCSRT01 ,cap= 77 ;
rltdc:msc= BCSRT01 ,MODE=active;
rltdp:msc=all;

You might also like