Eidc32 Spec Sheet
Eidc32 Spec Sheet
The eIDC32 delivers the power you need in the smallest form factor
in the industry. This high-performance eIDC32 door controller can
handle more cards, more schedules and more functions than any Key Features & Benefits
single door controller on the market – making it an ideal solution
for virtually any access control installation. Compact single door controller
mounts at the door in a double ü
gang box for easy installation
Uses exisiting network
infrastructure and connects to
closest network switch with single
ü
Cat 5/Cat 6 cable
PoE carries both data and power
for controller and peripheral door ü
hardware
OC1 NC
ü
+ C
2 7
IN1 IN3
3 8
D0
D1
5 0
D0
D1
when disconnected from the host ü
GND GND
(so-events are never lost)
12V+ 12V+
PW- LED
Secure transmissions with end-to-
PW+ BUZ
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
TECHNICAL OVERVIEW | Ethernet Integrated Door Controller | S-EIDC32
GENERAL PHYSICAL
Readers: 2 Dimensions: 1.30” D x 1.70” W x 2.82” H
Doors: 1 (3.30 x 4.32 x 7.16 cm)
Cards: 8,000 in Web Mode Enclosure: 2.84” D x 4.30” W x 4.30” H
5,000 with Supervisor Plus (7.20 x 10.90 x 10.90 cm)
64,000 with infinias Access Control Management Plaster Ring: 0.48” D x 4.75” W x 4.75” H
software
(1.20 x 12.10 x 12.10 cm)
History: 16,000 transactions (web mode)
Cover Plate: 0.48” D x 4.75” W x 4.75” H
Schedules: 255 (1.20 x 12.10 x 12.10 cm)
Holidays: 48 Unit Weight: 3.7 oz (105 g)
Power: Direct from PoE switch or external power supply Shipping Weight: 1.0 lb (0.45 kg) approximate
(24 VDC, 1 A)
Communication: Ethernet, 10Base-T
Max Distance: 100 m (328 ft)
Switch: Cat5, Cat5e, Cat6
ENVIRONMENTAL
Operating Temp: 32° to 120°F (0° to 49°C)
Storage Temp: -40° to 150°F (-40° to 66°C)
READERS
Humidity: 0% to 85% relative, non-condensing
Power: 12 VDC at 250 mA per reader Certifications: CE, Class A, FCC part 15, Class A, UL 294
Types: Wiegand format
Wire: 6 conductor, 500 ft
WARRANTY
Period: 2 Year Replacement
INPUTS
1-4: Configurable inputs, contact closure or transistor-
transistor logic (TTL), with optional end of line
resistor (EOLR) supervision
Tamper: Integrated infrared tamper
Wire: 2 conductor, 2,000 ft PART NUMBER
S-EIDC32: infinias® Ethernet-Enabled Integrated Door Controller
OUTPUTS
1 & 2: Open collector outputs with electronic overload RECOMMENDED ACCESSORIES
protection (max 450 mA at 12 VDC)* S-SMB-5075: Surface Mounting Box
3: Form C, SPDT relay output with configurable initial S-RACK-006: Rackmount Adapter
state (max 5 A at 250 VAC)
4: Built-in warning buzzer or alarm tone generator
(max 80 dB)
Reader: LED output
Buzzer output
Wire: 2 conductor, 2,000 ft NOTES
§§The maximum total of all output power from the eIDC32 is 750 mA.
§§The maximum output to either reader is 250 mA.
§§The maximum output from the combined open collectors is whichever of the
following is less: 450 mA or 750 mA less the sum of the readers.
1004296
ANSI/UL 294
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
© 2016 3xLOGIC, Inc. All rights reserved. Information in this document is subject to change without notice. 3xLOGIC and the 3xLOGIC logo are trademarks of
3xLOGIC, Inc. All other trademarks are the property of their respective owners. Revised: July 8, 2016 12:11 PM