JOB SAFETY PLAN (JSP)

COMPANY: MAJEES TECHNICAL SERVICES LLC.

DATE: 26/12/2019
ACTIVITY: Working at height, Scaffolding TASK DESCRIPTION: Scaffolding, Bolting work & working at height at
Work at Security Building Area. Security Building area for vehicle parking shed.
WORK LOCATION: Daleel Security Building
- Vehicle parking shed area.
TASK HAZARD CONTROL ACTION *( )
PARTY
Mobilization of  H2S and LEL a) H2S and LEL Gas detection within 15m
personnel &  Personnel being perimeter from the live area if required.
Transporting Run over or struck b) Trailer driver have valid License
by moving vehicles c) Trailer banks man need to stay always with
equipment. Permit
 Lack of site HSSE inside plant area operation
knowledge d) All personnel will receive the MTS - HSE holder
 Accident Induction
 vehicle movement e) Ensure all material/tools/ equipment /
plant is visually inspected before use to
ensure all safe guards are working
f) All personnel working in close proximity to
moving vehicles shall wear high visibility
vests
g) Correct PPE to be worn at all times
h) Un-authorized entry of personnel to
worksite must be restricted. Barriers and
safety signs to be used.
i) Thorough visual inspection of the area and
ground conditions to be carried out before
work starts
j) No personnel to stand behind reversing
k) Authorized Drivers drive the vehicle for
shifting and other materials.
General  Working without Adequate Work Permit should be available
work permit. prior to the commencement of the job and shall
 In-experienced be displayed at work place.
 Improper planning
& communication Conduct Tool Box talks, JSP & Adequate PPE’s. Permit
 Short cutting of Strict supervision has to be ensured. holder
activities
Proper planning to be done, Usage of home
 Over confident
tools to be avoided.
 Absent minded
 Extreme high Use barrier cream from sunlight and use
Temperature & coverall (full suit).
humidity
 Working without The supervisor to communicate with all parties
PPE, Toolbox talk.
 Improper planning Ensure welfare facilities
of work and tools.
 Fire hazard.

Majees Technical Services LLC.

Bolting work &  Unbalance  Ensure the PTW system in place
working at  Fall of men &  Continues Gas test by permit holder
height. material  Ensure the bolts remove and placed one by
 Striking one.
Permit
 Striking ,Slip &  Carefully or qualified person will be
trip engaged in activity. holder
 Trapping of limbs  Effective supervision and TBT
 Crushing of body  Isolate existing services and flow lines.
parts  Ground conditions will be reviewed before
 Environmental commencing activity.
impact  Proper PPEs including safety harness to be
 Spillage used and housekeeping should be done.
 Personal injuries  Bolt to be cleaned of any oils, slush,
 Dehydration lubricants etc. that may cause a slip.
 Noise  Use of non-spark tools
 Use of WD40  Soles of the Safety shoes need to be cleaned.
 Required hot bolting will be carefully
handling & fixed up properly as per plan.
 Use only color coded tools and tackles
which are in good condition.
 During fixing of tools & tackles ensure
proper access, PPEs.
 No loads will be pulled or dragged.
 From work area & fire fighting equipment
to be provided like fire extinguisher, sand
bucket.
Scaffolding  Personnel fall  Tool box meeting being conducted before
erection & from height execution of the scaffold erection. Hazard
dismantling  Personnel injured associated & precautionary measures will
by falling material be explained to the working crew.
 Collapse of  Only certified scaffolders erect the scaffold
Scaffold under the supervision of scaffolding Permit
 Slip & trip inspector. Holder
 Heat exhaustion  Full body safety harness with double
lanyard being used by scaffolders.
 Presence of  Scaffolds are red tagged "Do not use" while
hydrocarbon in being erected.
the sterile area  Work place barricaded & caution boards
 Hydrocarbon will be displayed to avoid unauthorized
presence man entry.
 Wearing hard hat is mandatory in work
site.
 Slip & trip
 Heat exhaustion
 Before erection, ground level checked for
imposed load.
 Material stacking on platform prohibited
 Ladder sufficiently supported and tied
 Access & egress will be kept clean
 Not to work when temperature is high.
 No entry inside the barricaded area.
 Effective supervision and effective TBT

Majees Technical Services LLC.

  Lifting activities to be taken care with
proper supervision
 Gas testing
 Shift rotation works
 Follow PTW and follow signage

Use of Hand  Breaking of  Make regular inspection of hand tools Permit

Tools hacksaw blades / before use job. Holder
chisels etc..,  TBT about safe hand tools use &
highlighting of hand tools hazards.
 Use of incorrect
 Must be use PPE’s
(wrong) tools.
 Use the right type of hand tools for the right
 Broken handles of jobs.
tools.  Ensure proper inspection & conduct

 Skilled person , using proper technique

Manual Shifting  LTI/RWC/Property  Ensure proper hauling of materials, get Permit
loss help if required. holder
 Wear cotton gloves. Use the legs when
lifting object not the back muscles, keep
back straight “Don’t Twist”.
 Never try to lift more than you can handle
safely. If you are in doubt, consult your
supervisor.
 Ensure that workers are complying with
the minimum PPE’s requirement.
 Trip Slip , a) Ensure adequacy of resources required and Permit
 Manual Handling plan the work area properly to avoid holder
Wind up and accumulation of materials, spills, wastages,
House Keeping etc., that harm personnel at site.
b) Establish clearly maintained walkways and
for movement of vehicles / equipment,
wherever Access clear from unwanted
materials.
Work supervisor on site is to confirm (√) that all controls are in place prior to start the job

Permit Applicant: Signature: Date:

Responsible Supervisor: Signature: Date:

Permit Holder: Signature: Date:

Area authority: Signature: Date:

Majees Technical Services LLC.