Electrical network management

Schneider Electric
PM8000 Technical Datasheet
 Advanced metering PM8000 series
Functions and characteristics

The PowerLogic PM8000 series meter is a highly accurate, extremely reliable power
PB113688

and energy meter with unmatched flexibility and usability. The meter combines
accurate 3-phase energy and power measurements with data logging, power quality
analysis, alarming and I/O capabilities not typically available in such a compact
meter.

The PM8000 series meters are compliant with stringent international standards that
guarantee their metering accuracy and power quality measurements. Ideal for
industrial and critical power installations that are responsible for maintaining the
operation and profitability of a facility.

Applications and benefits

bb Maximize profits by providing the highest output possible with the least amount of
risk to availability.
bb Optimize availability and reliability of electrical systems and equipment.
bb Monitor power quality (PQ) for compliance and to prevent problems.
bb Meters fully supported by StruxureWare Power Monitoring Expert and
PowerLogic PM8000 series meter PowerSCADA Expert Software.
Main characteristics
bb Precision metering:
vv IEC 61557-12 PMD Sx K70 3000m 0.2 (performance measuring and monitoring
functions).
PB113691

vv Class 0.2S accuracy IEC 62053-22, ANSI C12.20 Class 0.2 (active energy).
vv Industry leading Class 0.5S* accuracy for reactive energy (IEC 62053-24).
vv Cycle-by-cycle RMS measurements updated every ½ cycle.
vv Full ‘multi-utility’ WAGES metering support.
vv Net metering.
vv Anti-tamper protection seals.

bb PQ compliance reporting and basic PQ analysis.

vv Monitors and logs parameters in support of international PQ standards,
- IEC 61000-4-30 Class S
- IEC 62586
- EN 50160
vv Generates onboard PQ compliance reports accessible via onboard web pages:
- Basic event summary and pass/fail reports, such as EN 50160 for power
frequency, supply voltage magnitude, supply voltage dips, short and long inter-
ruptions, temporary over voltages, voltage unbalance and harmonic voltage.
- ITIC (CBEMA) and SEMI curves, with alarm categorization to support further
PowerLogic PM8000 series meter - rear view analyses.
- NEMA Motor Derating curve.
- Basic meter provides EN 50160 but can be configured to provide IEEE 519.
vv Harmonic analysis:
- THD on voltage and current, per phase, min/max, custom alarming.
PB113692

- Individual harmonic magnitudes and angles on voltage and current, up to the

63rd harmonic.
vv High resolution waveform capture: triggered manually or by alarm, captured
waveforms available directly from the meter via FTP in a COMTRADE format.
vv Disturbance detection and capture: sag/swell on any current and voltage channel,
alarm on disturbance event, waveform capture with per-event information.
vv Patented disturbance direction detection: provides indication of the captured
disturbance occurring upstream or downstream of the meter; timestamped results
provided in the event log, with degree of certainty of disturbance direction.

bb Used with StruxureWare Power Monitoring Expert software, provides detailed PQ

reporting across entire network:
vv EN 50160 report.
vv IEC 61000-4-30 report.
vv PQ compliance summary.
PowerLogic PM8000 DIN rail mounted meter vv ISO 50001.
vv Display of waveforms and PQ data from all connected meters.
bb Onboard data and event logging.
vv 512 MB of standard non-volatile memory. 10 MB of standard non-volatile memory
dedicated to capture billing data, events, and waveforms.

*Certification pending

2 plsed310058EN
 Advanced metering PM8000 series
Functions and characteristics (cont.)

vv No data gaps due to network outages or server downtime.

PB113670

vv Min/Max log for standard values.

vv 50 user-definable data logs, recording up to 16 parameters on a cycle-by-cycle or
other user definable interval.
vv Continuous logging or ‘snapshot’ triggered by setpoint and stopped after defined
duration.
vv Trend energy, demand and other measured parameters.
vv Forecasting via web pages: average, minimum and maximum for the next four
hours and next four days.
vv Time-of-use in conjunction with StruxureWare software.
vv Event log: alarm conditions, metering configuration changes, and power outages,
timestamped to 1 millisecond.

bb Alarming and control.

PowerLogic remote display. vv 50+ definable alarms to log critical event data, trigger waveform recording, or
perform control function.
vv Trigger on any condition, with cycle-by-cycle and 1-second response time.
vv Combine alarms using Boolean logic and to create alarm levels.
vv Alarm notification via email text message.
PB113671

vv In conjunction with StruxureWare Power Monitoring Expert, software alarms and

alarm frequency are categorized and trended for easy evaluation of worsening/
improving conditions.

bb Excellent quality: ISO 9001 and ISO 14000 certified manufacturing.

Ease of use
bb Easy installation and setup.
vv Panel and DIN rail mounting options, remote display option.
vv Pluggable connectors.
vv Free setup application simplifies meter configuration.

PowerLogic I/O module. bb Front panel.

vv Easy to read colour graphic display.
vv Simple, intuitive menu navigation with multi-language (8) support.

bb Flexible remote communications.

PB113669

vv Multiple simultaneously operating communication ports and protocols allow

interfacing with other automation systems; (e.g. waveforms, alarms, billing data,
etc.) can be uploaded for viewing/analysis while other systems access real-time
information.
vv Supports Modbus, ION, DNP3, IEC 61850.
vv Dual port Ethernet: 10/100BASE-TX; daisy-chaining capability removes need for
additional switches.
vv Create redundant network loop using Rapid Spanning Tree Protocol (RSTP) and
managed Ethernet switches.
vv Customize TCP/IP port numbers enable/disable individual ports.
vv RS-485 2-wire connection, up to 115200 baud, Modbus RTU and ION protocols,
PowerLogic PM8000 series meter with remote DNP3 is also supported via RS-485.
vv Ethernet to serial gateway with Modbus Master functionality, connecting to 31
downstream serial Modbus devices. Also supports Modbus Mastering over TCP/
IP (Ethernet) network.
vv Full function web server with factory and customizable pages to access real-time
and PQ compliance data.
vv Push historical data via email.
vv Advanced security: Up to 16 configurable user accounts.

bb Time synchronization via:

vv GPS clock (RS-485) or IRIG-B (digital input) to +/- 1 millisecond.
vv Also supports Network Time Protocol (NTP/SNTP) and time set function from
StruxureWare software server.

Adaptability
bb ION™ frameworks allow customizable, scalable applications, object-oriented
programming, compartmentalizes functions, and increases flexibility and
adaptability.
vv Applications include: access and aggregate data from Modbus devices on serial
port or across the network (Modbus TCP/IP), logging and/or processing data by
totalizing, unit conversion or other calculations, applying complex logic for
alarming or control operations, data visualization via web pages.

plsed310058EN 3
 Advanced metering PM8000 series
Functions and characteristics (cont.)

Standard meter I/O

bb 3 digital status/counter inputs.
PB113686

bb 1 KY (form A) energy pulse output for interfacing with other systems.

Modular I/O options

bb Optional expansion modules (up to 4 per meter) add digital/analogue I/O.

Option modules include:

bb Digital module
vv 6 digital status/counter inputs.
vv 2 Form C relay outputs, 250 V AC / 30 V DC, max current 8 A at 250 V AC or 5 A at
24 V DC, 20 k cycles (resistive).

bb Analogue module
PowerLogic PM8000 series meter with I/O modules. vv 4 analogue inputs (4-20 mA; 0-30 V).
vv 2 analogue outputs (4-20 mA; 0-10 V) for interfacing with building management
sensors and systems.

Commercial Reference numbers

Meter description Commercial ref. no.
DIN96 panel mount meter METSEPM8240
DIN rail mount meter METSEPM8243
DIN rail mount meter with remote display METSEPM8244
Accessories description Commercial ref. no.
Remote display, 3 m cable, mounting hardware for 30 METSEPM89RD96
mm hole (nut & centering pin), mounting hardware for
DIN96 cutout (92 x 92 mm) adapter plate
Terminal covers for utility sealing METSEPM8000SK
Adapters for mounting meter and remote display back METSEPMAK
to back & ANSI 102 mm, 300 mm Ethernet cable
Display cable, 1 metre METSECAB1
Display cable, 3 metres METSECAB3
Display Cable, 10 metres METSECAB10
Digital I/O module (6 digital inputs & 2 relay outputs) METSEPM89M2600
Analogue I/O module (4 analogue inputs & 2 analogue METSEPM89M0024
outputs)
PM8000 hardware kit METSEPM8HWK
PM8000 remote display hardware kit METSEPM8RDHWK

4 plsed310058EN
 Advanced metering PM8000 series
Functions and characteristics (cont.)

Features guide PM8000

General
PB113696

Use on LV and MV systems b

Current accuracy (5 A Nominal) 0.1 % reading
Voltage accuracy (57 V L-N/100 V L-L to 400 V L-N/690 V L-L) 0.1 % reading
Active energy accuracy 0.2 %
Number of samples/cycle or sample frequency 256
Instantaneous rms values
Current, voltage, frequency b
Active, reactive, apparent power Total and per phase b
Power factor Total and per phase b
Current measurement range (autoranging) 0.05 A to 10 A
Energy values
Active, reactive, apparent energy b
Settable accumulation modes b
Demand values
Current Present and max. values b
Active, reactive, apparent power Present and max. values b
Predicted active, reactive, apparent power b
Synchronisation of the measurement window b
PowerLogic™ PM8000 bottom view DIN mounting. Setting of calculation mode Block, sliding b
Power quality measurements
Harmonic distortion Current and voltage b
Individual harmonics Via front panel and web page 63
Via StruxureWare software 63
Waveform capture b
Detection of voltage swells and sags b
Fast acquisition 1/2 cycle data b
EN 50160 compliance checking b
Customizable data outputs (using logic and math functions) b
Data recording
Min/max of instantaneous values b
Data logs b
Event logs b
Trending/forecasting b
SER (Sequence of event recording) b
Time stamping b
GPS synchronisation (+/- 1 ms) b
Memory (in Mbytes) 512
Display and I/O
Front panel display b
Wiring self-test b
Pulse output 1
Digital or analogue inputs(max) 27 digital
16 analogue
Digital or analogue outputs (max, including pulse output) 1 digital
8 relay
8 analogue
Communication
RS-485 port 1
Ethernet port 2
Serial port (Modbus, ION, DNP3) b
Ethernet port (Modbus/TCP, ION TCP, DNP3 TCP, IEC 61850 (2)) b
Ethernet gateway b
Alarm notification via email b
HTTP web server b
SNMP with custom MIB and traps for alarms b
SMTP email b
NTP time synchronization b
FTP file transfer b

plsed310058EN 5
Advanced metering PM8000 series
Functions and characteristics (cont.)

Electrical characteristics PM8000

Type of measurement True rms to 256 samples per cycle
Measurement Current & voltage Class 0.2 as per IEC 61557-12
accuracy Active Power Class 0.2 as per IEC 61557-12
Power factor Class 0.5 as per IEC 61557-12
Frequency Class 0.02 as per IEC 61557-12
Active energy Class 0.2S IEC 62053-22 (In=5 A)
Class 0.2 IEC 61557-12, ANSI C12.20 Class 0.2
Reactive Energy Class 0.5S IEC 62053-24
Data update rate 1/2 cycle or 1 second
Input-voltage Specified accuracy 57 V L-N/100 V L-L to 400 V L-N/690 V L-L
characteristics voltage
Impedance 5 M per phase
Specified accuracy 42 Hz to 69 Hz
frequency (50/60 Hz nominal)
- Frequency
Limit range of 20 Hz to 450Hz
operation
- frequency
Input-current Rated nominal 1 A (0.5S), 5 A (0.2S) , 10 A (0.2 ANSI)
characteristics current
Specified accuracy Starting Current: 5 mA
current range Accurate Range: 50 mA - 10 A
Permissible 200 A rms for 0.5S, non-recurring
overload
Impedance 0.0003 per phase
Burden 0.024 VA at 10 A
Power supply AC 90-415 V AC ±10 % (50/60 Hz ± 10 %)
DC 120-300 V DC ±10 %
Ride-through time 100 ms (6 cycles at 60 Hz) min., any condition
200 ms (12 cycles at 60 Hz) typ., 120 V AC
500 ms (30 cycles at 60 Hz) typ., 415 V AC
Burden Meter Only: 18 VA max at 415 V AC, 6 W at 300 V DC
Fully optioned meter: 36 VA max at 415 V AC, 17 W at
300 V DC.
Input/outputs Meter Base Only 3 form A digital inputs (30 V AC/60 V DC)
1 form A (KY) solid state digital output (30V AC/60 V DC,
75 mA).
Optional Digital - 6 form A digital inputs (30 V AC / 60 V DC) wetted
+ 2 form C relay outputs (250 V AC / 30 V DC, 8 A at 250
V AC or 5 A at 24 V DC)
Analogue - 4 analogue inputs (4-20 mA, 0-30 V DC) + 2
analogue outputs (4-20 mA, 0-10 V DC).
Mechanical characteristics
Weight Integrated Display Model 0.581 kg
DIN rail mounted Model 0.528 kg
IO modules 0.140 kg
Remote display 0.300 kg
IP degree of protection IP 54, UL type 12: Panel mount and Remote display,
front.
IP 30: Panel mount rear, DIN rail mount, I/O modules.
Dimensions Panel mount 96 x 96 x 77.5 mm
model
DIN model 90.5 x 90.5 x 90.8 mm
Remote display 96 x 96 x 27 mm
IO modules 90.5 x 90.5 x 22 mm
Environmental conditions
Operating temperature -25 ºC to 70 ºC
Remote Display Unit -25 ºC to 60 ºC
Storage temperature -40 ºC to 85 ºC
Humidity rating 5 % to 95 % non-condensing
Installation category III
Operating altitude (maximum) 3000 m above sea level

6 plsed310058EN
Advanced metering PM8000 series
Functions and characteristics (cont.)

Electromagnetic compatibility
Product standards IEC 62052-11 and IEC 61326-1
Immunity to electrostatic discharge IEC 61000-4-2
Immunity to radiated fields IEC 61000-4-3
Immunity to fast transients IEC 61000-4-4
Immunity to surges IEC 61000-4-5
Immunity to conducted disturbances IEC 61000-4-6
Immunity to power frequency IEC 61000-4-8
magnetic fields
Immunity to conducted disturbances, CLC/TR 50579
2-150 kHz
Immunity to voltage dips & IEC 61000-4-11
interruptions
Immunity to ring waves IEC 61000-4-12
Conducted and radiated emissions EN 55022, EN 55011, FCC part 15, ICES-003
Surge withstand Capability (SWC) IEEE C37.90.1
Safety
Safety Construction IEC/EN 61010-1 ed.3, CAT III, 400 V L-N / 690 V L-L
UL 61010-1 ed.3 and CSA-C22.2 No. 61010-1 ed.3, CAT
III, 347 V L-N / 600 V L-L
IEC/EN 62052-11, protective class II
Communication (1)
Ethernet to serial line gateway Communicates directly with up to 32 unit load ION slave
devices.
Web server Customisable pages, new page creation capabilities,
HTML/XML compatible.
Serial port RS 485 Baud rates of 2400 to 115200, pluggable screw terminal
connector.
Ethernet port(s) 2 x 10/100BASE-TX, RJ45 connector (UTP).
Protocol Modbus, ION, DNP3, IEC 61850, HTTP, FTP, SNMP, SMTP,
DPWS, RSTP, NTP, SNTP, GPS protocols.
Firmware characteristics
High-speed data recording Down to 1/2 cycle interval burst recording, stores detailed
characteristics of disturbances or outages. Trigger
recording by a user-defined setpoint, or from external
equipment.
Harmonic distortion Up to 63rd harmonic for all voltage and current inputs.
Sag/swell detection Analyse severity/potential impact of sags and swells:
magnitude and duration data suitable for plotting on
voltage tolerance curves per phase triggers for waveform
recording, control.
Disturbance direction detection Determine the location of a disturbance more quickly and
accurately by determining the direction of the disturbance
relative to the meter. Analysis results are captured in the
event log, along with a timestamp and confidence level
indicating level of certainty.
Instantaneous High accuracy of standard speed (1s) and high-speed
(1/2 cycle) measurements, including true rms per phase
and total for:
voltage, current, active power (kW),reactive power (kvar),
apparent power (kVA), power factor, frequency, voltage
and current unbalance, phase reversal.
Load profiling Channel assignments (800 channels via 50 data
recorders) configurable for any measurable parameter,
including historical trend recording of energy, demand,
voltage, current, power quality, or any measured
parameter. Trigger recorders based on time interval,
calendar schedule, alarm/event condition, or manually.
Trend curves Historical trends and future forecasts to better manage
demand, circuit loading, and other parameters. Provides
average, min, max and standard deviation every hour for
last 24 hours, every day for last month, every week for last
8 weeks and every month for last 12 months.
Waveform captures Simultaneous capture of all voltage and current channels
sub-cycle disturbance capture, maximum cycles is
100,000 (16 samples/cycle x 96 cycles, 10 MB memory),
max 256 samples/cycle.
Alarms Threshold alarms: adjustable pickup and dropout setpoints
and time delays, numerous activation levels possible for a
given type of alarm, user-defined or automatic alarm
threshold settings, user-defined priority levels (optional
automatic alarm setting).

plsed310058EN 7
Advanced metering PM8000 series
Functions and characteristics (cont.)

Firmware characteristics (cont.)

Advanced security Up to 16 users with unique access rights. Perform resets,
time sync, or meter configurations based on user
privileges.
Memory 512 MB (10 MB for programming and interval logging).
Firmware update Update via the communication ports.
Display characteristics
Integrated or Remote display 320 x 240 (1/4 VGA) Colour LCD, configurable screens , 5
buttons and 2 LED indicators (alarm and meter status).
Languages English, French, Spanish, Russian, Portugese,German,
Italian, Chinese.
Notations IEC, IEEE.
The HMI menu includes
Alarms Active alarms, historic alarms.
Basic Reading Voltage, current, frequency, power summary.
Power Power summary, demand, power factor.
Energy Energy total, delivered, received.
Events Timestamped verbose event log.
Power Quality EN 50160, harmonics, phasor diagrams.
Inputs/Outputs Digital inputs, digital outputs, analogue inputs, analogue
outputs.
Nameplate Model, serial and FW version.
Custom Screens Build your own metrics.
Setup Menu Meter setup, communications setup, display setup, date/
time/clock setup, alarm setup, language setup, time of
use setup, resets, password setup.

8 plsed310058EN
Schneider Electric Industries SAS As standards, specifications and designs develop from time to time, please ask
35, Rue Joseph Monier, for confirmation of the information given in this document.
CS 30323
F - 92506 Rueil Malmaison Cedex
Design: Schneider Electric
RCS Nanterre 954 503 439 Photos: Schneider Electric
Capital social 896 313 776
www.schneider-electric.com Over 75 % of Schneider Electric products
have been awarded the Green Premium ecolabel
PM8000 Meter
PLSED310058EN © 2016 - Schneider Electric - All rights reserved 10-2016