ComAp Hybrid Solution PDF
ComAp Hybrid Solution PDF
3
ComAp definition of Hybrid system
4
Usage of complex hybrid systems
5
The benefits of hybrid system
6
The economy of the system
7
Solutions for both simple and complex
hybrid applications
8
Our offer for single genset telecom
hybrid applications
InteliLiteTELECOM InteliLiteTELECOM DC
An integrated controller designed The InteliLite TELECOM DC is the perfect
especially for telecom applications and generating-set controller for DC telecom
suitable for generating-sets operating in applications and offers complete
single- or dual-standby mode. monitoring, control and protection of the
DC hybrid system.
07.05.2019 9
Our offer for multiple genset PV/Diesel
hybrid applications
10
Offerings for multiple genset
PV/Diesel hybrid applications
12
The key functions of the InteliSys NTC
Hybrid controller
13
ComAp hybrid power management
In the case that grid is not available, ComAp controllers will control the site to match the
genset output with the load 14
In the middle of the day the PV output reaches the highest output
In this case the gensets run under-loaded 16
ComAp hybrid power management
In standard power management one of the gensets would be stopped but in this case this
would endanger the reliability of the whole system 17
The output of the PV is reduced in order to protect the gensets from being under-loaded
ComAp hybrid power management
When the PV array is covered by the cloud ComAp controllers will automatically load the
gensets to keep the smooth power delivery 18
ComAp hybrid power management
When the PV becomes available again the controllers will reduce the gensets output to
utilize as much power from PV as possible 19
ComAp hybrid power management
During the afternoon the PV output is decreasing and the load is typically increasing
20
The controllers will start, synchronize and load more gensets to cover the load
ComAp hybrid power management
In the evening the load gets to its peak and the PV output goes to zero
21
If the load is higher than the DG output ComAp system is able to switch off the low priority
loads in four steps
Introduction
22
Application
23
Benefits
24
Cloud Forecasting System
components
25
How it works
cloud movements
Cloud Forecasting System
components
27
28
Project support
29
Reference
30
Reference
Vanuatu
2x 4MW gen-sets, 4x 1MW gen-
sets, 3MW wind farm (up to 70%
penetration)
InteliGens + InteliMains
controllers
ComAp has upgraded the old
gen-sets to be able to react on
intermittent wind farm output
More information
31
Thank you
for your time!
The heart of
smart control
07.05.2019 32