Acfp 2000

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

The 2000 Series Fire Pump is designed to provide water to

stand pipe, sprinkler, chemical mitigation and hydrant systems


for fire supression in industrial and commercial facilities.

Capacity to 500 GPM (1 ,892 L/min)


Pressures to 150 PSI ( 106 m)
Working Pressures to 250 PSI

• Top centerline discharge with foot supported casing.


- Ease of installation.
- Simplifies piping layout.
- Reduces problems associated with piping strain.
• Self-venting design eliminates the need for automatic
air release valve.
• Rear pullout design supplied as standard with spacer
coupling.
- Ease of maintenance, eliminates disturbing driver or
piping when removing rotating element.
• Hydraulically balanced impeller extends bearing life
and assures smoother operation.
• Available in electric motor or diesel engine driven
configuration.

NOTE: This product is not intended for potable water applications

Fire Pumps
Series 2000
END SUCTION PUMP

ACFP 2000
Series 2000
Basic Construction
Part Name
Cast Iron, Bronze Fitted
Pipe Plugs (Casing) Brass
Flush Piping Copper
Packing Glands Bronze
Bolts (Gland) Stainless Steel
Pipe Plugs (Brg. Hsg.) Steel
Pacing (Rings) Graphite Impregnated Acrylic Yarn
Casing Assembly Cast Iron
Casing Gasket Rubber (Buna “N”)
Casting Joint Bolts Steel
Casing Rings Bronze
Shaft Steel Pump Size

Shaft Sleeves Bronze 3x2x6.5F

Bearing Cup (Inboard) Cast Iron 4x3x9F

Bearing Cup (Outboard) Cast Iron


Bearing Housing Cast Iron
Ball Bearing (Inboard) Steel
Ball Bearing (Outboard) Steel
Deflectors Rubber (Buna “N”)
Cap Screws Steel
Grease Fittings (Bearing) Steel
Key (Impeller) Stainless Steel
Key (Coupling) Steel
Impeller Bronze
Seal Cage PTFE

Xylem Inc.
8200 N. Austin Avenue
Morton Grove, Illinois 60053
Phone: (847) 966-3700
Fax: (847) 965-8379
www.acfirepump.com
A-C Fire Pump is a trademark of Xylem Inc. or one of its subsidiaries.
© 2016 Xylem Inc. ACFP 2000 January 2016

You might also like