CO-PO & CO-PSO Mapping for the academic Year 2019-20

Subject Name with Code Basic Thermodynamics - 18ME33

Course Coordinator/s Mr. Ravikumar S, and Mr. Pavan Kumar KP

List of Program Outcomes Program Specific Outcomes

Course
Outcomes PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 Total PSO1 PSO2 PSO3 PSO4 Total
CO-1 3 2 - - - - - - - - - - 5 2 - - - 2
CO-2 3 2 - - - - - - - - - - 5 2 - - - 2
CO-3 3 2 - - - - - - - - - - 5 2 - - - 2
CO-4 3 2 - - - - - - - - - - 5 2 - - - 2
CO-5 2 0 - - - - - - - - - - 2 2 - - - 2
Total 14 8 - - - - - - - - - - 22 10 - - - 10

CO-PO Mapping
PO 1: Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialisation for the solution of complex
engineering problems.
COs Mapping Competency Performance Indicators
CO1 Explain fundamentals of 1.1.1 Apply mathematical techniques such as
thermodynamics and evaluate energy 1.1 Demonstrate competence in mathematical
calculus, linear algebra, to solve problems
interactions across the boundary of modelling.
thermodynamic systems
1.2.1 Apply fundamental Gas laws and Energy laws
3 1.2 Demonstrate competence in basic sciences
to an engineering problem
1.3.1 Apply fundamental engineering concepts like
1.3 Demonstrate competence in engineering
temperature scale International fixed points, to solve
fundamentals
engineering problems on temperature measurements
1.1 Demonstrate competence in mathematical 1.1.1 Apply mathematical techniques such as
3
modelling. calculus, linear algebra, to solve problems
 1.2.1 Apply fundamental Gas laws and Energy laws
1.2 Demonstrate competence in basic sciences
to an engineering problem
1.3.1 Apply fundamental engineering concepts like
1.3 Demonstrate competence in engineering
Entropy to solve engineering problems on Second law
fundamentals
of thermodynamics
CO2 Evaluate the feasibility of cyclic 1.4.1 Apply Mechanical engineering concepts like TD
and non-cyclic processes using 2nd law 1.4 Demonstrate competence in specialized
cycles, heat engines, Carnot’s Principles to solve
of thermodynamics. engineering knowledge to the program
engineering problems.
CO3 Apply the knowledge of entropy, 1.1.1 Apply mathematical techniques such as
reversibility and irreversibility to solve 1.1 Demonstrate competence in mathematical
calculus, linear algebra, to solve problems
numerical problems and apply 1st law of modelling.
thermodynamics to closed and open
systems and determine quantity of energy 1.2.1 Apply fundamental Gas laws and Energy laws
1.2 Demonstrate competence in basic sciences
transfers and change in properties. to an engineering problem
3
1.3.1 Apply fundamental engineering concepts like work
1.3 Demonstrate competence in engineering
and heat, to solve engineering problems on First law of
fundamentals
thermodynamics
1.4 Demonstrate competence in specialized 1.4.1 Apply Mechanical engineering concepts like
engineering knowledge to the program Reversibility, exergy to solve engineering problems.
CO4 Interpret the behaviour of pure 1.2.1 Apply fundamental properties of pure
substances and its application in practical 1.2 Demonstrate competence in basic sciences
substances, Energy laws to an engineering problem
problems. 1.3.1 Apply fundamental engineering concepts like
1.3 Demonstrate competence in engineering
Steam properties to solve engineering problems on
fundamentals
Steam generation and behaviour.
3 1.4.1 Apply Mechanical engineering concepts like
Steam behaviour and its applications in various thermal
1.4 Demonstrate competence in specialized systems
engineering knowledge to the program
CO5 Recognize differences between 1.2.1 Apply fundamental Gas laws and Energy laws
ideal and real gases and evaluate 1.2 Demonstrate competence in basic sciences
to an engineering problem
thermodynamic properties of ideal and 1.3.1 Apply fundamental engineering concepts like
2
real gas mixtures using various relations. 1.3 Demonstrate competence in engineering
Entropy to solve engineering problems on Ideal and
fundamentals
Real gas mixtures.

PO 2: Problem analysis: Identify, formulate, research literature, and analyse complex engineering problems reaching substantiated conclusions using first
principles of mathematics, natural sciences, and engineering sciences.
COs Mapping Competency Performance Indicators
CO1 Explain fundamentals of 2.1.1 Identify Thermal systems (like closed, open,
thermodynamics and evaluate energy adiabatic, etc) and variables & parameters (like
interactions across the boundary of
thermodynamic systems system properties and energy interactions) to solve
2.1 Demonstrate an ability to identify and
the problems
formulate complex engineering problem
2.1.2 Identify the mathematical and engineering
knowledge that applies to Temperature measurement
2
2.2.1 Combine scientific principles and engineering
concepts to formulate temperature scales and process
2.2 Demonstrate an ability to formulate and that is appropriate in terms of applicability and
interpret a model required accuracy depending on some standard
international fixed points.
 2.2.2 Identify assumptions (quasi-static process,
reversible process) necessary to allow modelling of a
system at the level of accuracy required.

2.1 Demonstrate an ability to identify and 2.1.1 Identify engineering systems like devices
formulate complex engineering problem converting heat to work in a thermodynamic cycle,
variables, and parameters to find performances of
such devices
CO2 Evaluate the feasibility of cyclic 2.1.2 Identify the mathematical, engineering and
and non-cyclic processes using 2nd law other relevant knowledge that applies to solve
2
of thermodynamics. problems on Carnot cycle.
2.2 Demonstrate an ability to formulate and2.3.1 2.2.1 Identify assumptions (mathematical and
interpret a model. physical) necessary to allow modelling of a system at
the level of accuracy required like understanding the
limitations of First law and justifying PMM-I and
PMM-II.
CO3 Apply the knowledge of entropy, 2.1.1 Articulate problem statements and identify
reversibility and irreversibility to solve objectives in solving thermal system problems.
numerical problems and apply 1st law of
thermodynamics to closed and open 2.1 Demonstrate an ability to identify and 2.1.2 Identify engineering systems, variables, and
systems and determine quantity of energy formulate complex engineering problem. parameters like Properties, Entropy, heat and work to
transfers and change in properties. solve the problems on First law of TD.
2
2.2.1 Apply engineering mathematics and
computations to solve mathematical models
2.2 Demonstrate an ability to execute a solution 2.2.2 Produce and validate results through skilful
process and analyse results use of knowledge of Entropy, Reversibility &
Irreversibility and First law of Thermodynamics.
CO4 Interpret the behaviour of pure 2.1 Demonstrate an ability to formulate and2.3.1 2.1.1 Combine scientific principles and engineering
substances and its application in practical interpret a model concepts in the use of T-S and H-S diagrams and
problems.
representation of various processes on those
diagrams.
2.2 Demonstrate an ability to execute a solution 2.2.1 Produce and validate results through skilful
2 process and analyse results use of contemporary engineering tools and models
such as Stem tables and Mollier Diagram.
2.4.4 Extract desired understanding and conclusions
consistent with objectives and limitations of the
analysis of Steam properties.
CO5 Recognize differences between
ideal and real gases and evaluate
0
thermodynamic properties of ideal and
real gas mixtures using various relations.
 CO-PSO Mapping
PSO 1: To comprehend the knowledge of mechanical engineering and apply them to identify, formulate and address the mechanical engineering problems
using latest technology in an effective manner.

COs Mapping Competency Performance Indicators

CO1 Explain fundamentals of
thermodynamics and evaluate energy
interactions across the boundary of 2
thermodynamic systems
CO2 Evaluate the feasibility of cyclic
and non-cyclic processes using 2nd law
2
of thermodynamics.

CO3 Apply the knowledge of entropy,

reversibility and irreversibility to solve Demonstrate an ability to apply the knowledge of
numerical problems and apply 1st law of Apply the knowledge of Thermodynamic laws and
2 Mechanical Engineering to identify, formulate and
thermodynamics to closed and open concepts to solve basic thermal system problems.
systems and determine quantity of energy address Mechanical Engineering problems.
transfers and change in properties.
CO4 Interpret the behaviour of pure
substances and its application in practical
2
problems.

CO5 Recognize differences between

ideal and real gases and evaluate
2
thermodynamic properties of ideal and
real gas mixtures using various relations.