Scribd
Upload
235 views5 pages

Tutorial For TTP223 Touch Sensor Module Capacitive

This document provides a tutorial for using a TTP223 touch sensor module. The module can detect touch and replace traditional buttons. The tutorial explains how to connect the touch sensor module to an LED and resistor. When the touch sensor is touched, the LED will turn on, and when not touched, the LED will turn off. The tutorial also explains the pin definitions and jumper settings for the touch sensor module.

Uploaded by

Natasya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
235 views5 pages

Tutorial For TTP223 Touch Sensor Module Capacitive

This document provides a tutorial for using a TTP223 touch sensor module. The module can detect touch and replace traditional buttons. The tutorial explains how to connect the touch sensor module to an LED and resistor. When the touch sensor is touched, the LED will turn on, and when not touched, the LED will turn off. The tutorial also explains the pin definitions and jumper settings for the touch sensor module.

Uploaded by

Natasya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

instructables

Tutorial for TTP223 Touch Sensor Module ( Capacitive)

by mybotic

Description

The TTP223 is a touch pad detector IC replicating a single tactile button. This touch detection IC is designed for
replacing traditional direct button key with diverse pad size.

Features

1. Input Voltage: 3.3V - 5.5V DC

2. Module size: 15mm x 11mm

3. Stable touching detection of human body for replacing traditional direct switch key.

Tutorial for TTP223 Touch Sensor Module ( Capacitive): Page 1


Step 1: Material Preparation

For this tutorial, we required these items:

1. TTP223 Touch Sensor Module ( Capacitor)

2. 10mm LED (Yellow)

3. Resistor 220 ohm

4. Breadboard Power Stick 3.3V / 5V

5. Li-Ion Rechargable Battery 7.4V 1200mAh

Tutorial for TTP223 Touch Sensor Module ( Capacitive): Page 2


Step 2: Pin Definition

Trigger setting mode: (1 = Short ; 0 = No Short)

Jumpers AB

Momentary / High Output 00 (used in this tutorial)

Self Lock / High Output 01

Momentary / Low Output 10

Self Lock / Low Output 11

Tutorial for TTP223 Touch Sensor Module ( Capacitive): Page 3


Step 3: Hardware Connection

Make the connection as above picture.

Step 4: Results

Based on the results,

1. The LED will turn on when we touch the TTP223 Capacitive Touch Sensor Module.

2. If no touching detected, the LED will turn off.

Tutorial for TTP223 Touch Sensor Module ( Capacitive): Page 4


Step 5: Video

This video shows the demonstration of tutorial how to use TTP223 Capacitive Touch Sensor Module.

https://www.youtube.com/watch?v=3VGXRHtMYNI

Tutorial for TTP223 Touch Sensor Module ( Capacitive): Page 5

You might also like