Scribd
Upload
112 views4 pages

IT2-FLSs Manual

The document describes how to use the IT2-FLS Matlab/Simulink Toolbox. It discusses downloading and extracting the toolbox files, adding the toolbox directory to the Matlab path, and running the fuzzyt2 command. It then summarizes the main workflow of the toolbox, including using the fuzzyt2 UI to create a *.t2fis file defining the IT2 fuzzy logic system, and using evalt2.m to evaluate the system output given inputs and type reduction method. Finally, it provides examples of using readt2fis to import a *.t2fis file and evalt2 to calculate the output.

Uploaded by

ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views4 pages

IT2-FLSs Manual

The document describes how to use the IT2-FLS Matlab/Simulink Toolbox. It discusses downloading and extracting the toolbox files, adding the toolbox directory to the Matlab path, and running the fuzzyt2 command. It then summarizes the main workflow of the toolbox, including using the fuzzyt2 UI to create a *.t2fis file defining the IT2 fuzzy logic system, and using evalt2.m to evaluate the system output given inputs and type reduction method. Finally, it provides examples of using readt2fis to import a *.t2fis file and evalt2 to calculate the output.

Uploaded by

ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

1.

How to install the IT2-FLS Matlab/Simulink Toolbox


Download and Extract the RAR file into a convenient directory that is not part of the
MATLAB distribution. Then use the MATLAB pathtool command. Navigate to the directory
you just extracted into, down below the IT2FLSv1.0 directory to the IT2-FLS_Toolbox-v1.0
directory and add that to your MATLAB path. Then at the MATLAB command prompt,
command
fuzzyt2

2. Main Workflow of the IT2-FLSs Toolbox


The general workflow of the IT2-FLSs toolbox is given below. The IT2-FLSs toolbox UI
starts with fuzzyt2.m function and is basically used to create a text file with ‘it2fis’ extension.
The created *.it2fis text file includes all information of the IT2FLSs designed by using the
toolbox UI.

*.t2fis file (text)

Input
IT2-FLSs evalt2.m Output
Toolbox UI
TR Method

isSimulink
It is also possible to create or modify this *.it2fis text file manually. But, the text file has to be
created or modified according to standard form. The standard structure of *.it2fis text file is
given below.
[System]
Name='Example' %% Name of the file
Type='sugeno'
Version=2.0
NumInputs=3 %% Number of inputs
NumOutputs=1 %% This version only supports one output
NumRules=4 %% Number of Type-2 Fuzzy rules
AndMethod='prod'
OrMethod='probor'
ImpMethod='prod'
AggMethod='sum'
DefuzzMethod='wtaver'
TypeRedMethod='KM' %% Define the TR method, KM, EKM,IASC, EIASC, EODS, WM,
NT and BMM. Note that, for BMM, two more parameters most be defined (n,m).
Thus, define 'BMM(n,m)'
outputType='icrisp'

[Input1] %% All inputs should have the following structure


Name='x1' %% Name of the first input
Range=[-1 1] %% the universe of discourse
NumMFs=3 %% Number of Type-2 Fuzzy sets for x1
MF1U='x1-N':'trimf',[-1.8 -1 -0.2 1] %Upper MF parameters for'x1-N'
MF1L='x1-N':'trimf',[-1.6 -1 -0.4 0.7] %Lower MF parameters for'x1-N'
MF2U='x1-Z':'trimf',[-0.8 0 0.8 1] %Upper MF parameters for'x1-Z'
MF2L='x1-Z':'trimf',[-0.6 0 0.6 0.7] %Lower MF parameters for'x1-Z'
MF3U='x1-P':'trimf',[0.2 1 1.8 1] %Upper MF parameters for'x1-P'
MF3L='x1-P':'trimf',[0.4 1 1.6 0.7] %Lower MF parameters for'x1-P'

[Input2]
Name='x2'%% Name of the second input
Range=[-1 1] %% the universe of discourse
NumMFs=3 %% Number of antecedent MFs for x2
MF1U='x2-N':'gaussmf',[0.4247 -1 1]
MF1L='mf1L':'gaussmf',[0.21235 -1 0.5]
MF2U='x2-Z':'gaussmf',[0.4247 0 1]
MF2L='mf2L':'gaussmf',[0.21235 0 0.5]
MF3U='x2-P':'gaussmf',[0.4247 1 1]
MF3L='mf3L':'gaussmf',[0.21235 1 0.5]

[Input3]
Name='x3'%% Name of the second input
Range=[-1 1] %% the universe of discourse
NumMFs=3 %% Number of antecedent MFs for x3
MF1U='x3-N':'trapmf',[-1.9 -1.1 -0.9 -0.1 1]
MF1L='mf1L':'gaussmf',[0.21235 -1 0.5]
MF2U='x3-Z':'trapmf',[-0.9 -0.1 0.1 0.9 1]
MF2L='mf2L':'gaussmf',[0.21235 0 0.5]
MF3U='x3-P':'trapmf',[0.1 0.9 1.1 1.9 1]
MF3L='mf3L':'gaussmf',[0.21235 1 0.5]

[Output1]%% the output must have the following structure


Name='y'
Range=[-1 1]
NumMFs=3 %% Number of consequent MFs.
MF1='N':'constant',[-5 -5] %Lower and Upper MF parameters, i.e. [low up]
MF2='Z':'constant',[0 0] %Lower and Upper MF parameters, i.e. [low up]
MF3='P':'constant',[5 5] %Lower and Upper MF parameters, i.e. [low up]

[Rules] %Rule Structure


1 1 1, 1 (1) : 1 %% If x1 is'x1-N' and x2 is'x2-N' and x3 is'x3-N', then y
is y is 'N'
1 2 1, 3 (1) : 1
1 1 2, 3 (1) : 1
1 2 2, 2 (1) : 1 %% If x1 is'x1-N' and x2 is'x2-Z' and x3 is'x3-Z', then y
is y is 'Z'

3. Evaluating the output of an IT2-FLS from Matlab


Firstly, the generated t2fis file is exported to workspace as follows:
Matlab Syntax:
T2FIS=readt2fis(fileName);

Inputs

fileName - *.t2fis file created by UI or manually.

Then, the evalt2.m function can be used to calculate the output for a given t2fis file and
current input.
Matlab Syntax:
y=evalt2(T2FIS,input, TRType,issimulink)
Inputs

T2FIS - *.t2fis file created by UI or manually.

input – Current input values of the IT2FLSs to calculate output.

TRmethod – Type Reduction/ Defuzzification method:

TRmethod=1-> KM

TRmethod=2-> EKM

TRmethod=3-> IASC

TRmethod=4-> EIASC

TRmethod=5-> EODS

TRmethod=6-> WM

TRmethod=7-> NT

issimulink– A variable for the Simulink library, must be set as “false” while operating in
Matlab

Outputs:

y – Double – the defuzzified output value.


Examples:
T2=readt2fis('Test.t2fis');
% using the TypeRedMethod in the t2fis file'KM'
yKM=evalt2(T2,[-1 -.4])
% changing the TypeRedMethod as 'NT'
yNT=evalt2(T2,[-1 -.4],7,false)

You might also like