Scribd
Upload
390 views3 pages

Google Assistant Home Automation Code

This code connects an ESP8266 WiFi microcontroller to an Adafruit IO MQTT broker to control 4 relays. It defines the WiFi credentials, MQTT server details, and relay pin assignments. In setup, it connects to WiFi and subscribes to MQTT feeds for each relay. In loop, it connects to MQTT, reads subscribed feeds, and turns the corresponding relay on or off based on the feed value.

Uploaded by

Stjepan Bartolović
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
390 views3 pages

Google Assistant Home Automation Code

This code connects an ESP8266 WiFi microcontroller to an Adafruit IO MQTT broker to control 4 relays. It defines the WiFi credentials, MQTT server details, and relay pin assignments. In setup, it connects to WiFi and subscribes to MQTT feeds for each relay. In loop, it connects to MQTT, reads subscribed feeds, and turns the corresponding relay on or off based on the feed value.

Uploaded by

Stjepan Bartolović
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

//Viral Science

// www.youtube.com/c/viralscience
//Google Assistant Home Automation
#include <ESP8266WiFi.h>
#include "Adafruit_MQTT.h"
#include "Adafruit_MQTT_Client.h"

#define Relay1 D1
#define Relay2 D2
#define Relay3 D3
#define Relay4 D4

#define WLAN_SSID " ---- " // Your SSID


#define WLAN_PASS " ---- " // Your password

/************************* Adafruit.io Setup *********************************/

#define AIO_SERVER "io.adafruit.com" //Adafruit Server


#define AIO_SERVERPORT 1883
#define AIO_USERNAME " ---- " // Username
#define AIO_KEY " ----- " // Auth Key

//WIFI CLIENT
WiFiClient client;

Adafruit_MQTT_Client mqtt(&client, AIO_SERVER, AIO_SERVERPORT, AIO_USERNAME,


AIO_KEY);

Adafruit_MQTT_Subscribe Light1 = Adafruit_MQTT_Subscribe(&mqtt,


AIO_USERNAME"/feeds/Relay1"); // Feeds name should be same everywhere
Adafruit_MQTT_Subscribe Light2 = Adafruit_MQTT_Subscribe(&mqtt, AIO_USERNAME
"/feeds/Relay2");
Adafruit_MQTT_Subscribe Light3 = Adafruit_MQTT_Subscribe(&mqtt, AIO_USERNAME
"/feeds/Relay3");
Adafruit_MQTT_Subscribe Light4 = Adafruit_MQTT_Subscribe(&mqtt, AIO_USERNAME
"/feeds/Relay4");

void MQTT_connect();

void setup() {
Serial.begin(115200);

pinMode(Relay1, OUTPUT);
pinMode(Relay2, OUTPUT);
pinMode(Relay3, OUTPUT);
pinMode(Relay4, OUTPUT);

// Connect to WiFi access point.


Serial.println(); Serial.println();
Serial.print("Connecting to ");
Serial.println(WLAN_SSID);

WiFi.begin(WLAN_SSID, WLAN_PASS);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println();
Serial.println("WiFi connected");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());

mqtt.subscribe(&Light1);
mqtt.subscribe(&Light3);
mqtt.subscribe(&Light2);
mqtt.subscribe(&Light4);
}

void loop() {

MQTT_connect();

Adafruit_MQTT_Subscribe *subscription;
while ((subscription = mqtt.readSubscription(20000))) {
if (subscription == &Light1) {
Serial.print(F("Got: "));
Serial.println((char *)Light1.lastread);
int Light1_State = atoi((char *)Light1.lastread);
digitalWrite(Relay1, Light1_State);

}
if (subscription == &Light2) {
Serial.print(F("Got: "));
Serial.println((char *)Light2.lastread);
int Light2_State = atoi((char *)Light2.lastread);
digitalWrite(Relay2, Light2_State);
}
if (subscription == &Light3) {
Serial.print(F("Got: "));
Serial.println((char *)Light3.lastread);
int Light3_State = atoi((char *)Light3.lastread);
digitalWrite(Relay3, Light3_State);
}
if (subscription == &Light4) {
Serial.print(F("Got: "));
Serial.println((char *)Light4.lastread);
int Light4_State = atoi((char *)Light4.lastread);
digitalWrite(Relay4, Light4_State);

}
}

void MQTT_connect() {
int8_t ret;

if (mqtt.connected()) {
return;
}

Serial.print("Connecting to MQTT... ");

uint8_t retries = 3;
while ((ret = mqtt.connect()) != 0) {
Serial.println(mqtt.connectErrorString(ret));
Serial.println("Retrying MQTT connection in 5 seconds...");
mqtt.disconnect();
delay(5000);
retries--;
if (retries == 0) {
while (1);
}
}
Serial.println("MQTT Connected!");

You might also like