Scribd
Upload
624 views1 page

Gpswox Vehicle Tracker Commands PDF

The document lists SMS commands that can be used to control a GPS tracking device. Some of the key commands include: SERVER,1,eu.gpswox.com,6023,0# - Set the server address using a domain name or IP address. TIMER,10,30# - Set the GPS data upload interval in seconds, with different intervals for when the ignition is on/off. SENALM,ON,1# - Enable vibration alarm notifications by SMS, GPRS, or call depending on the set parameter. SPEED,ON,10,80,1# - Enable over-speed alarm to detect speeds over a set threshold like 80 km/h for

Uploaded by

thebuzzdev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
624 views1 page

Gpswox Vehicle Tracker Commands PDF

The document lists SMS commands that can be used to control a GPS tracking device. Some of the key commands include: SERVER,1,eu.gpswox.com,6023,0# - Set the server address using a domain name or IP address. TIMER,10,30# - Set the GPS data upload interval in seconds, with different intervals for when the ignition is on/off. SENALM,ON,1# - Enable vibration alarm notifications by SMS, GPRS, or call depending on the set parameter. SPEED,ON,10,80,1# - Enable over-speed alarm to detect speeds over a set threshold like 80 km/h for

Uploaded by

thebuzzdev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SUPPORTED SMS COMMANDS

APN,telia# - Set APN

SERVER,1,eu.gpswox.com,6023,0# - Set server address using domain name

SERVER,0,109.235.68.205,6023,0# - Set server address using IP

TIMER,10,30# - Set GPS data upload inteval in seconds (minimum 10s). First value – when ACC is ON. Second value –
when ACC is OFF. Maximum supported value 18000s

GMT,E,0,0# - Set time zone. First value – hours, second value – minutes

SOS,A,10854654558# - Set SOS numbers. Format: SOS,<A>,<Number 1>[,Number 2][,Number 3]#

CENTER,A,10854654558# - Set center numbers. Only SOS numbers can send this command

RELAY,0# - Engine restore

RELAY,1# - Engine stop

SENALM,ON,1# - Enable Vibration Alarm. Format: SENALM,ON,alarm way#. Alarm way: 0/1/2; 0 means GPRS, 1 means
SMS+GPRS, 2 means SMS+GPRS+CALL

SENALM,OFF# - Disable vibration alarm

POWERALM,ON,1,3,30# - Enable Power Disconnect Alarm. Format: POWER,ON,alarm way,duration,recharge time#.


Alarm way: 0/1/2; 0 means GPRS, 1 means SMS+GPRS, 2 means SMS+GPRS+CALL. Duration: 2-60s (Disconnect
detecting time). Connect Duration: 1-3600s (Minimum recharge time)

POWER,OFF# - Disable Power Disconnect Alarm

BATALM,ON,1# - Enable Low Battery Alarm. Format: BATALM,ON,alarm way#. Alarm way: 0/1/2; 0 means GPRS, 1
means SMS+GPRS, 2 means SMS+GPRS+CALL

BATALM,OFF# - Disable Low Battery Alarm

MOVING,ON,100,1# - Enable Towing Alarm. Format: MOVING,ON,distance,alarm way#. Distance: 100-1000 m. Alarm
way – as per previous commands on the list

MOVING,OFF# - Disable Towing Alarm

SPEED,ON,10,80,1# - Enable Over-speed Alarm. Format: SPEED,ON,Duration,speed,alarm way#. Duration: 5-600s.


Speed: 1-255 km/h. Alarm way – as per previous commands on the list

SPEED,OFF# - Disable Over-speed Alarm

FENCE,ON,0,14.626847,120.993548,5,OUT,1# - Set Geo-Fence Alarm. Format:


FENCE,ON,0,Lat,Long,radius,in/out,alarm way#. Radius: 1-9999 (100m). Alarm way – as per previous commands on
the list

FENCE,OFF# - Disable Geo-Fence Alarm

VERSION# - Check frmware version

PARAM# - Check parameters

GPRSSET# - Check GPRS setting

STATUS# - Check GPRS/GPS status

WHERE# - Check location coordinates

URL# - Check location Google link

RESET# - Restart device

FACTORY# - Factory reset

You might also like