HIGH DEFLECTION MOUNTS

ME Mount Series (ME-100/ME-500)

TT-A Mount Series
TT-B Mount Series
HTTA Mount Series
VHC Mount Series
2K Mount Series (2K1/2K2/2KS)
GB530 Isolators
Barry-Flex Isolators
ME-MOUNT SERIES (ME100/ME500)

An effective isolation solution for installations

where instrumentation is subjected to rugged
environmental conditions.

A P P L I C AT I O N S
• Militarized computer installations
(such as disk drives)
• Vehicular mounted equipment
• Avionics
• Lightweight electrical equipment

F E AT U R E S ME Series Mounts are low frequency, free standing isolators

• Compact, low-profile design which are environmentally resistant and operate over a
• Available in two sizes wide temperature range. They are for use in isolating
delicate instrumentation in mobile, militar y or office equip-
• High deflection capability and
ment applications.
compact size for light loads
• Axial to radial stiffness ratio 2:1

Specifications
BENEFITS
• Natural Frequency 12-20 Hertz
• Can be used in tandem for
• Transmissibility at resonance 10 Max.
extended deflection capability
• Resilient Element Neoprene
LOAD RANGE • Standard Materials Aluminum
• ME-100 = 5 load ratings • Weight ME-100 = 0.2 oz.
to 10 lbs. per mount ME-500 = 0.5 oz.
• ME-500 = 5 load ratings
to 10 lbs. per mount
Environmental Data
• Operating temperature range is -20˚F to +180˚F
(-30˚C to +82˚C).
• Resistant to oil, most solvents and ozone.
• Butyl and Barry LT available on special order where
high damping and extended temperature performance
characteristics are required.

P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 ) 163

 ME100 MOUNT SERIES:

Dimensions & Load Range Specifications

ME100 SERIES ME-100 Axial Load vs. Deflection

Dimensional Drawing

ME-100 Radial Load vs. Deflection

ME100 SERIES LOAD RATINGS

Part # Maximum Load (lbs.) Axial Natural Frequency Color Code
Axial Compression Radial

ME100-1 2.50 1.40 14 Hz Blue

ME100-2 3.75 1.90 14 Hz Red
ME100-3 4.25 2.75 16 Hz Green
ME100-4 6.50 3.75 16 Hz Yellow
ME100-5 10.00 6.25 16 Hz White

164 P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 )

ME500 MOUNT SERIES:

Performance Characteristics

ME500 SERIES ME-500 Axial Load vs. Deflection

Dimensional Drawing

ME500 Radial Load vs. Deflection

ME500 SERIES LOAD RATINGS

Part # Maximum Load (lbs.) Axial Natural Frequency Color Code
Axial Compression Radial

ME500-1 2.00 0.75 12 Hz Blue

ME500-2 3.00 1.50 12 Hz Red
ME500-3 5.00 2.25 12 Hz Green
ME500-4 7.50 4.00 12 Hz Yellow
ME500-5 10.00 5.50 12 Hz White

P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 ) 165

 T TA M O U N T S E R I E S

Mid-frequency, high deflection mounts for

protection from severe vibration and shock.

A P P L I C AT I O N S
• Ruggedized disk drives
• Electronics for rotary wing
and propeller driven aircraft
• Mobile ground equipment
• Other applications where
high amplitude, low frequency
vibration is present

The TT-A mount is a mid frequency isolator which

F E AT U R E S combines a low profile and large deflection capability
• Available in Silicone or Neoprene in order to provide both shock and vibration protection.
• Axial to radial stiffness of 1:1
The TT-A is ideal for applications where high amplitude
vibration inputs are expected or where large shock
• Mid frequency isolation
deflections are needed.
• Aluminum construction

BENEFITS Specifications
• Attenuates a 15g, 11 millisecond • Natural Frequency 12-20 Hertz
half-sine shock to 6g’s
• Transmissibility at resonance 4.0 Max. (Hi-Damp Silicone)
• Survives a 30g, 11 millisecond 10.0 Max. (Neoprene)
half-sine crash safety shock
• Resilient Element Hi-Damp Silicone or
• Lightweight & durable Neoprene
• Standard Materials Aluminum (Restraining Strap
LOAD RANGE Phosphor Bronze)
• 3 load ratings to 15 lbs. per mount • Weight 2.0 oz.

Environmental Data
• Hi-Damp Silicone operating temperature range is -67˚F
to +300˚F (-55˚C to +150˚C) and is resistant to fungus
and ozone.
• Neoprene operating temperature range is -20˚F to +180˚F
(-30˚C to +82˚C) and is resistant to oil and ozone.

166 P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 )

T TA M O U N T S E R I E S :

Dimensions & Performance Characteristics

TTA SERIES OPTIONAL RESTRAINING STRAP

Dimensional Drawing Dimensional Drawing - Part #880749-02804

*Please note, mounts are not inherently fail-safe.

They may require the use of a suitable restraining device.

TTA SERIES ORDERING INFORMATION

PART # LOAD RANGE (lbs.)
Neoprene Silicone
TTNA-1 TTA-1 5-7
TTNA-2 TTA-2 7-10
TTNA-3 TTA-3 10-15

TTA Load vs. Deflection TTNA Load vs. Deflection TTA & TTNA Natural Frequency vs. Load

P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 ) 167

 TTB MOUNT SERIES

Mid-frequency, low profile, high deflection mounts

for protection from severe vibration and shock.

A P P L I C AT I O N S
• Shipping containers
• Airborne electronics & racking
• Shipboard equipment
• Mobile mounted equipment
• Other applications where
high amplitude, low frequency
vibration is present

F E AT U R E S Barr y TT-B Mounts are mid-frequency isolators with a

• Available in Silicone or Neoprene large deflection capacity, designed to give both shock
• Axial to radial stiffness of 2.3:1 and vibration isolation protection. The standard Neoprene
version is for applications where temperature extremes
• Mid frequency isolation
are not a factor.
• Aluminum construction

BENEFITS Specifications
• Attenuates a 15g, 11 millisecond • Natural Frequency 25-35 Hertz
half-sine shock to 10g’s
• Transmissibility at resonance 4.0 Max. (Hi-Damp Silicone)
• Attenuates a 30g, 11 millisecond 10.0 Max. (Neoprene)
half-sine crash safety shock to 16 g’s
• Resilient Element Hi-Damp Silicone or
• Lightweight Neoprene
• Standard Materials Aluminum (Restraining Strap
LOAD RANGE Beryllium Copper)
• 3 load ratings to 30 lbs. per mount • Weight 6.5 oz.

Environmental Data
• Hi-Damp Silicone operating temperature range is -67˚F
to +300˚F (-55˚C to +150˚C) and is resistant to fungus
and ozone.
• Neoprene operating temperature range is -20˚F to +180˚F
(-30˚C to +82˚C) and is resistant to oil and ozone.

168 P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 )

TTB MOUNT SERIES:

Dimensions & Performance Characteristics

TTB SERIES OPTIONAL RESTRAINING STRAP

Dimensional Drawing Dimensional Drawing - Part #8810015-12804

*Please note, mounts are not inherently fail-safe.

They may require the use of a suitable restraining device.

ORDERING INFORMATION
PART # LOAD RANGE (lbs.)
Neoprene Silicone Neoprene Silicone
TTN-B-1 TT-B-1 12 10
TTN-B-2 TT-B-2 20 18
TTN-B-3 TT-B-3 30 25

TTB Axial Load vs. Deflection TTB Radial Load vs. Deflection TTB Series Natural Frequency vs. Load

P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 ) 169

 H T TA M O U N T S E R I E S

Low-frequency, highly damped mounts for

high level shock and vibration isolation.

A P P L I C AT I O N S
• Mounting equipment in
helicopter environments
(meets MIL-STD-810C requirements)
• Other applications where
a large deflection capacity
is required

F E AT U R E S Barr y HTTA-Series Mounts are low frequency isolators

• Low natural frequency (10-13 Hertz) with a large deflection capacity to provide both vibration
• Axial to radial stiffness is 1:1.4 and shock protection. They are designed to meet the
requirements of MIL-STD-810C for mounting electronic
• Aluminum construction
equipment in helicopter environments.

BENEFITS
• Will not degrade in performance Specifications
when subjected to a 15g,
11 millisecond half-sine shock input
• Natural Frequency 10-13 Hertz
• Transmissibility at resonance 4.0 Max.
• Will not fail under a 30g,
11 millisecond half sine shock input • Resilient Element Hi-Damp Silicone
• Lightweight
• Standard Materials Aluminum (Restraining
Strap Phosphor Bronze)
• Fungus and ozone resistant
• Weight 4 oz.
LOAD RANGE
Environmental Data
• 3 load ratings from 5 - 20 lbs.
per mount
• Hi-Damp Silicone elastomer has an operating temperature
range of -67˚F to +300˚F (-55˚C to +150˚C ) and is fungus
and ozone resistant.

170 P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 )

H T TA M O U N T S E R I E S :

Dimensions & Performance Characteristics

HTTA SERIES OPERATING RANGE DATA

HTTA SERIES
Dimensional Drawing Part # Axial Load Static Deflection Natural
Range (lbs.) Range Frequency Range (Hz.)

HTTA-1 5-8 .028”-.055” 13-10

HTTA-2 7-13 .021”-.061” 13-10
HTTA-3 13-20 .028”-.062” 13-10

OPTIONAL RESTRAINING STRAP

Dimensional Drawing - Part #885368-12804

*Please note, mounts are not inherently fail-safe.

They may require the use of a suitable restraining device.

HTTA Load vs. Deflection HTTA Typical Transmissibility

P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 ) 171

 VHC MOUNT SERIES

High deflection shock and vibration isolators

for medium-weight sensitive equipment.

A P P L I C AT I O N S
• Ground vehicle electronics
• Shipboard equipment
• Shipping containers
• Equipment installed in
transportable shelters

F E AT U R E S Barr y VHC-Series mounts are special purpose, mid-fre-

• Buckling design quency isolators designed to protect sensitive equipment
• Steel construction when high level shock and vibration inputs are expected.
Typical applications include electronic equipment installed
• Compression to shear
in mobile equipment subjected to off-road environments.
stiffness ratio 2:1
• Designed to carry static loads in the
axial direction, but can accommodate Specifications
dynamic inputs in the radial direction • Natural Frequency 12-20 Hertz
• Attenuates 18" freefall shock input • Transmissibility at resonance 5.0 Max. (Barry LT
to approximately 12g’s Compound)
10.0 Max. (Neoprene)
BENEFITS • Resilient Element Barry LT Compound or
• Large deflection capacity provides Neoprene
superior shock attenuation • Standard Materials Steel (Restraining Strap
• Can be used as stabilizers for tall Beryllium Copper)
equipment packages • Weight 4 lbs.
• Maximum loads apply when mount
will be subjected to an 18" freefall Environmental Data
Larger loads can be accommodated • Barry LT (low-temperature) Compound, which is ideal for
for less severe shock inputs military applications, operates between -67˚F and +180˚F
(-55˚C to +82˚C) and is resistant to fungus and ozone.
LOAD RANGE • Neoprene has an operating temperature range of -20˚F
• 4 load ratings to 145 lbs. per mount to +180˚F (-30˚C to +82˚C) and resists oil and ozone.

172 P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 )

VHC MOUNT SERIES:

Dimensions & Performance Characteristics

LOAD RATINGS
VHC SERIES
Part # Max. Axial Load Rating (lbs.)
Dimensional Drawing Neoprene Barry LT

VHC-1A VHC-5A 45
VHC-2A VHC-6A 70
VHC-3A VHC-7A 100
VHC-4A VHC-8A 145

Compression Load vs. Deflection

COMPRESSION

Shear Load vs. Deflection

SHEAR

OPTIONAL RESTRAINING STRAP

Dimensional Drawing - Part #8810090-01804

Natural Frequency vs. Load

*Please note, mounts are not inherently fail-safe.

They may require the use of a suitable restraining device.

P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 ) 173

 2K MOUNT SERIES

Two stage shock mount and vibration isolator

for severe dynamic environments such as shipboard
and ground vehicles.

A P P L I C AT I O N S
• Naval sonar equipment
• Shipboard electronics
• Radar installations
• Computer & video displays

F E AT U R E S Barr y 2K-Series mounts offer the advantage of superior

• Combines shock and vibration vibration and shock protection for a wide range of loads
isolation in a single isolator in a single compact unit. These isolators are ideal for
• Protects from vibratory inputs isolating naval sonar equipment, shipboard electronics
as low as 10 Hz and communications.
• Designed for base mounting only
• Wide load range for most applications
Specifications
• Natural Frequency
BENEFITS
Vibration Element 6-8 Hertz vertical
• Elastomeric shock attenuating elements Shock Element 15 Hertz
have as much as 1 inch of available • Transmissibility at resonance
deflection (1.5 inches for 2KS) Vibration Element 2.5 Max.
• Limit shock transmissions to 20g’s Shock Element 10 Max.
when subjected to a five foot hammer • Resilient Element
blow per MIL-S-901 Vibration Element Friction Damped Spring
Shock Element Neoprene or Nitrile Elastomer
• Many custom versions are available.
• Standard Materials Varies with model
Consult factory for more information
(Standard Beryllium Copper Restraining
Strap)
LOAD RANGE • Weight See dimensional drawings
• 2K1 Series = 4 load ratings from
1 - 10 lbs. per mount Environmental Data
• 2K2 Series = 8 load ratings from • 2K1 and 2K2 isolators are for use with lightweight MIL-S-901 applications.
4 - 90 lbs. per mount • 2KS systems are for use with medium weight MIL-S-901 applications.
• 2KS Series for loads from • Isolators and systems met MIL-STD-16400 inclination, temperature, humidity and
250 -6,000 lbs. salt spray specifications, MIL-STD-167 vibration tests and MIL-M-17185 environ-
mental and oil immersion tests.
• Operating temperature range is -20˚F to +180˚F (-30˚C to +82˚C).
• Isolators are unaffected by humidity, sand, dust and fungus.
174
2K SERIES: 2K1

Dimensions & Performance Characteristics

* PLEASE NOTE: On 2K1 and 2K2 Isolators,

-AA part number indicates a short core for use
with dimpled mounting trays. -BA part number
indicates a long core for attachment directly
to equipment.

2K1 Series Mounts = 10 oz.

2K1 Load vs. Deflection

2K1 LOAD RATINGS

PART # STATIC LOAD RANGE

/ISOLATOR (LBS.)

2K1-AA-2 & BA-2 1-2

2K1-AA-4 & BA-4 2-4
2K1-AA-6 & BA-6 4-6
2K1-AA-10 & BA-10 6-10

P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 ) 175

 2K SERIES: 2K2

Dimensions & Performance Characteristics

2K2 Series Mounts = 1.6 lbs. 2K2 LOAD RATINGS

PART # STATIC LOAD RANGE

/ISOLATOR (LBS.)

2K2-AA-6 & BA-6 4-6

2K2-AA-10 & BA-10 6-10
2K2-AA-16 & BA-16 10-16
2K2-AA-25 & BA-25 16-25
2K2-AA-40 & BA-40 25-40
2K2-AA-60 & BA-60 40-60
2K2-AA-75 & BA-75 60-75
2K2-AA-90 & BA-90 75-90

2K2 Load vs. Deflection (0 to .6 inches)

* PLEASE NOTE: On 2K1 and 2K2 Isolators,

2K2 Load vs. Deflection (0.6 to 1.4 inches)
-AA part number indicates a short core for use
with dimpled mounting trays. -BA part number
indicates a long core for attachment directly
to equipment.

176 P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 )

2 K M O U N T S E R I E S L I G H T W E I G H T S TA B I L I Z E R :

Dimensional Drawing

LIGHTWEIGHT STABILIZER 21335-5 DIMENSIONAL DRAWINGS

2K EQUIPMENT INTERFACE 2K BULKHEAD INTERFACE

P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 ) 177

 GB530 MOUNT SERIES

Shock & vibration isolators protect naval

equipment installed in high impact and shock
loading environments.

A P P L I C AT I O N S
• Naval sonar equipment
• Shipboard electronics
• Radar installations
• Protection of sensitive
equipment & weaponry
during transportation

F E AT U R E S
• Steel construction Barr y GB530 Series mounts provide large deflections
• Protects from vibratory inputs under shock input and effective attenuation of structure-
as low as 7 Hz borne noise in the range of 12.5 - 10,000 Hertz.
GB530 isolators are ideal for shipboard applications.
BENEFITS
• Capable of large deflections
Specifications
under shock inputs
• Available in natural rubber with
• Natural Frequency As low as 7 Hertz
a transmissibility at resonance of • Transmissibility at resonance 10
approximately 10 • Resilient Element Natural rubber
• Excellent attenuation of structure borne • Standard Materials Steel
noise in the range of 12.5-10,000 Hz • Weight 7.45 lbs.

LOAD RANGE Environmental Data

• Load range to 1,322 lbs. per isolator • Natural rubber has an operating temperature range of -40˚F
to +180˚F (-40˚C to +82˚C).

178 P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 )

GB530 MOUNT SERIES

Dimensions & Performance Characteristics

GB530 SERIES (dimensions in mm) Isolator Type Min. load Max. load
Natural Rubber
GB530 (NR1) 16.5 lbs. 165 lbs.
GB530 (NR2) 33 lbs. 330 lbs.
GB530 (NR3) 55 lbs. 551 lbs.
GB530 (NR4) 88 lbs. 881 lbs.
GB530 (NR5) 132 lbs. 1,322 lbs.

- (M12) = Tapped top hole

- (M20) = Tapped top hole
- (FM) = Ferrous metal parts
- (NM) = Non magnetic parts
- (S) = Captivation strap
- (O) = Without captivation strap

GB530 - NR - M20 - NM - O Typical GB530 Part #

P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 ) 179

 B A R R Y - F L E X I S O L AT O R S E R I E S
(GBCO1/GBCO2)
Low-profile, high-deflection elastomeric shock
& vibration isolators protect sensitive militar y
equipment in harsh environments.

A P P L I C AT I O N S
• Electronic packages,
computers & communications
equipment installed within
military vehicles

F E AT U R E S
• Aluminum alloy construction
• Meets requirements of MIL-STD-810 Barr y-Flex isolators are designed for harsh environments
and DEF.STAN.07-55 where high-amplitude shock and vibration are encoun-
• Low-profile design tered. Their rugged design and high deflection capabilities
are ideal for this type of environment.
• Unique cooling feature

BENEFITS
Specifications
• Static deflection of .04" under
maximum load
• Natural Frequency 15 Hertz at maximum load
• Transmissibility at resonance 4.0
• Special elastomer formulation
meets damping and high deflection • Resilient Element Barry LT
characteristics of current defense • Standard Materials Aluminum alloy
standards • Weight GBCO1 = 1.45 oz.
• Up to .47" dynamic deflection GBCO2 = 2.68 oz.
available, despite low profile
• Elastomer will not overheat during Environmental Data
prolonged dynamic excursions • Operating temperature range of -40˚F to 180˚F
(-40˚C to +82˚C).
LOAD RANGE • Can be stored at temperatures as low as -67˚F (-55˚C).
• GBCO1 Series available in 3 load • Unique cooling feature ensures that elastomer does not
ratings from 8.8 to 17.6 lbs. overheat during prolonged dynamic excursions.
• Series available in 4 load ratings
from 17.6 to 40 lbs.

180 P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 )

B A R R Y - F L E X I S O L AT O R S E R I E S :

Dimensions & Performance Characteristics

GBCO1 SERIES (dimensions in mm) GBCO2 SERIES (dimensions in mm)

Load vs. Deflection Load vs. Deflection

Load vs. Natural Frequency Load vs. Natural Frequency

Part Numbers Load (kg)

Part Numbers Load (kg)
GBCO2-2-TM6-L or GBCO2-2-TM8-L 7
GBCO1-2-TM6-L 4 GBCO2-3-TM6-L or GBCO2-3-TM8-L 10
GBCO1-3-TM6-L 6 GBCO2-4-TM6-L or GBCO2-4-TM8-L 15
GBCO1-4-TM6-L 8 GBCO2-5-TM6-L or GBCO2-5-TM8-L 20

P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S . 1 - 8 0 0 - B A R RY- M A ( 1 - 8 0 0 - 2 2 7 - 7 9 6 2 ) 181