LAMELLA SETTLERS

-optimal sedimentation on a minimal footprint

The Lamella Separator by Nordic Water is the world’s leading inclined plate settler, initially developed at the
Johnson Institute in Sweden in the early 1970-ies. The Lamella Separator is designed to maximise settling
efficiency with minimal footprint. Its success is due to a number of factors, such as the unique flow control
system, which represents a breakthrough in modern plate separator design and has contributed significantly to
the excellent reliability and efficiency of the Lamella by Nordic Water.

DESIGNED TO PERFORM
Lamella Separators provide excellent separation and clarification
performance in a wide variety of water treatment applications, such as:

MUNICIPAL APPLICATIONS
– WATER AND WASTE WATER
• Pre-water Treatment
• Backwash Water Treatment
• Primary and Secondary Settling
• Tertiary Treatment
• Sludge Thickening

INDUSTRIAL
APPLICATIONS
• Industrial Process water
•C  hemical industry – purification and thickening
•P  ulp & paper industry
• Iron & steel industry, mill scale removal
•M  etal finishing – treatment of metal surfaces
•M  etal Hydroxide Wastewater
•P  ressure/vacuum Filtrate Clarification
•P  urification in biological cleaning processes
•R  ecirculation of water in the potato and vegetable
industry
•T  reatment of water in power plant dust scrubbers

…and many more, where solids must be separated

from fluids by sedimentation

2
MATERIALS AND BUILDING DIMENSIONS
In order to comply with different site requirements Free standing units:
and corrosive environments, the Lamella Separators – Stainless steel: up to 165 m2 settling area
are made from different materials, and in standard – FRP: up to 100 m2 settling area
or customized sizes. We have delivered installations Lamella plate packs for installation in basins:
for flow rates ranging from 2 m3/h to 40,000 m3/h and – Stainless steel or FRP for any flow required
free standing units up to 165 m2 effective area with only
15 m2 footprint.

HIGH CAPACITY ON A
MINIMAL BUILDING AREA
The Lamella Separator can reduce the footprint to as little as
10% of a traditional settling tank. Ideal for expanding capacity
in existing plants or whenever space is scarce or costly.

WIDE RANGE FOR

MAXIMUM FLEXIBILITY
The Lamella Separator is available as free standing models or plate packs, in different sizes
and plate distances. All models can be customized for various needs. Whether used in a
concrete basin or a steel tank, equipped with a sludge scraper or combined with a flocculation
tank, the Lamella separator will meet your process and application requirements. It is easy to
install and with the few moving parts the operating and maintenance costs are very low.

Enhanced Separation Uninterrupted settling

The well proven flow control By allowing the liquid to enter the
feature and excellent hydraulic plate assembly through the side,
design ensure equal flow distri- rather than underneath, the set-
bution over the lamella plates to tled material is not disturbed.
enhance separation.

3
 FREE STANDING MODELS
All free standing models can optionally be equipped with one or more floc-
culation tank(s) with agitator and rapid mixer to improve flocculation and
sedimentation.
Inlet channel Collection flumes

Clean Water Outlet

Inlet openings

Feed Sludge hopper

Sludge discharge

The feed enters the unit through the feed pipe and flows through the
inlet chamber in the centre of the unit and in between the plates through
openings in the sidewall. As the liquid flows upward between the plates,
the solids settle on the inclined, parallel plates and slide into the sludge
hopper at the bottom of the unit. In the hopper, the sludge is thickened
prior to discharge through the sludge outlet. The clarified liquid leaves
the plate assembly through openings at the top and is discharged into
collection channels leading to the clarified water outlet.
The even distribution of the flow to each plate ensures optimal opera-
tion at a high capacity. The side entry of the fluid prevents the solids that
have settled from being carried away with the entering fluid.

4
LS – Lamella Settler
The LS model is available in a number of standard sizes. It consists of a Lamella Plate
Separator and a conical sludge hopper in a single tank. The sludge is removed via hydro-
static pressure by opening a valve. Optional items include flocculation tanks with rapid
flush mixer and agitator, and a rotating sludge scraper in the hopper.

Lamella LS with a Lamella LS with­ Lamella LS is a Lamella Settler with sludge thickening bot-
sludge scraper out sludge scraper tom hopper

Lamella LT plate thickener

with a sludge thick­ ening
bottom tank. LT – Lamella Thickener
The Lamella Thickener is a Tank model available in several
standard sizes. It is supplied with a sludge thickening tank
equipped with a rotating sludge scraper. The tank volume is
higher than the hopper. These units are designed for flows
and applications with high solids content and thickened
underflow. Optional items include a flocculation tank with
rapid flash mixer and agitator.

Flocculation tank
Both models (LS and LT) can be equipped with a flocculation
tank with an agitator. The tank can be equipped with a rapid
flash mixer for good mixing of the flocculation agents.

Lamella Settler and DynaSand filter Installation of Lamella Settlers and Lamella LT with flocculation tank
– a complete range of water and ef- six 19m3 flocculation tanks in the UK
fluent products by Nordic Water

5
 PLATE PACKS
The models LP and LPS Plate Packs are made for installation in steel tanks or
concrete basins. These plate packs are mainly used in large municipal plants
but may also be successfully installed in smaller plants. The LP and LPS
models offer significant cost savings and are particularly well suited for
retrofitting to increase the capacity in existing basins. The Plate Packs are
ideally combined with a Zickert Bottom Sludge Scraper.
Outlet flume
Collection flumes
Plate assembly

Clean water
discharge

Inlet
Inlet openings

Sludge scraper

Plate assembly inlet openings

Inlet section

Sludge discharge

LP – Lamella Plate Pack Assembly The clarified water collected in

The LP model comes in several standard sizes. The Lamella Plate the V-notch weirs is transported
Packs feature fully submerged plates with a central collection flume. to the outlet flume
The central collection flume comes with v-notch weirs for collection
of clarified liquid that is discharged through an embedment flume.
The versatile LP model is easily fitted into most sedimentation
basins, and is well suited for waste water treatment.

LPS – Lamella Plate Pack Assembly with Side Flumes

The LPS model has flumes located on the sides of the plates and in-
corporates v-notch weirs. The plates extend above the water surface
and are individually removable. This solution is a very cost-effective Lamella plate pack in a concrete
per square foot of projected area, and is especially well suited for tank and with Zickert bottom
drinking water treatment. sludge scraper

6
LAMELLA CLEANBOT
Nordic Water recommends regular cleaning of the The CleanBot cleans the Lamella plates mechanically
Lamella plates to avoid sludge accumulation. Using the during normal operation. This means that there is no
automatically operated Lamella CleanBot, cleaning is need to take the Lamella out of operation or to lower the
performed without personnel. water level to remove any accumulated sludge.

The Lamella CleanBot in operation in

Singapore

LP AND LPS WITH

ZICKERT BOTTOM SLUDGE SCRAPER
The Zickert Sludge Scraper is ideal for installation customized to meet varying tank widths, lengths and
underneath lamella packs due to its very low profile. It geometry, it can be adapted to meet widely varying
is specially designed for continuous sludge thickening needs for municipal and industrial applications. More
and removal without disturbing the sludge blanket or information is available in the Zickert sales material
interrupting the sedimentation process. Since it is fully and on our home page.

LP Plate Packs can be

supplied ready for instal-
lation

Installation costs are re-

duced by minimal han-
dling

7
PILOT UNIT AND SEDIMENTATION TESTS
We can offer simple sedimentation tests on site or in understanding and sizing information. We can also
our laboratory to verify the settling ability and the provide a pilot unit to conduct appropriate tests on site
requirements for dosage of coagulants or poly- in order to identify the optimal equipment needs for the
electrolytes to improve settling speed or effluent actual setup and environment.
quality. This normally provides good initial

OTHER PRODUCTS
FROM NORDIC WATER:
• DynaSand Filters • Zickert Sludge Scrapers and basin equipment
• DynaDisc Disc Filters • Meva Screens and screenings treatment equipment
• DynaDrum Drum filter • Sobye TD Bandfilter

©Nordic Water Products AB. All rights reserved.

Lamella is a trade mark of Nordic Water Products AB in many coun-

tries throughout the world. Lamella is sold as SuperSettler on the
American continent including the Caribbean. Nordic Water Products
reserves the right to modify or change product specifications or de-
signs at any time, with or without notice.

Sweden Benelux Germany Spain

Head Office Nordic Water Benelux BV Nordic Water GmbH Nordic Water Tecnology Ibérica
Nordic Water Products AB De Scheysloot 47 Hansemannstraße 41 Plaça del Gas 4, 1 - 2,
Alfagatan 5 2201 GN Noordwijk 414 68 Neuss 08201 Sabadell
SE-431 49 Mölndal The Netherlands Germany Spain
Sweden Tel: +31 71 763 06 21 Tel: +49 2131 3106 0 Tel: +34 937 276 007
Tel: +46 31 748 54 00 Fax: +31 71 763 06 22 Fax: +49 2131 3106 10 Fax: +34 933 969 480
Fax: +46 31 748 54 10 [email protected] [email protected] [email protected]
[email protected]
China Norway
Service and Spare Parts Nordic Water Nordic Water Products AB
Nordic Water Products AB Products (Beijing) Co., Ltd. Drengsrudbekken 4
Hantverkargatan 15 Room 611, Interchina 1383 Asker
SE-542 31 Mariestad Commercial Building No. 33 Norway
Sweden Dengshikou Str. Dong Cheng District Tel: +47 66 75 21 10
Tel: +46 8 524 409 00 100006 Beijing Fax: +47 66 75 21 11
Fax: +46 8 520 173 25 China [email protected]
S1301-En-19.08

[email protected] Tel: +86 10 85 118 120

Fax: +86 10 85 118 121
[email protected]