Scribd Logo
Upload

Welcome to Scribd!

  • 106 views

    Tank Design

    Uploaded by

    kamleshyadavmoney
    This document contains input design data and calculations for the thickness of shell plates and bottom plates for a storage tank. Specifically: - The storage tank has a diameter of 2m, total height of 2.3m, and holds sulfuric acid. - Calculations are shown for the thickness of two shell courses based on height, allowable stress, and efficiency factor, resulting in 5mm thickness for both. - The minimum nominal thickness for bottom and roof plates is determined to be 6mm according to design code standards. - Detailed calculations are provided for determining the thickness of individual shell courses based on parameters like height, allowable stress, and efficiency factor in accordance with equipment design codes.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Tank Design

    Uploaded by

    kamleshyadavmoney
    106 views2 pages
    This document contains input design data and calculations for the thickness of shell plates and bottom plates for a storage tank. Specifically: - The storage tank has a diameter of 2m, total height of 2.3m, and holds sulfuric acid. - Calculations are shown for the thickness of two shell courses based on height, allowable stress, and efficiency factor, resulting in 5mm thickness for both. - The minimum nominal thickness for bottom and roof plates is determined to be 6mm according to design code standards. - Detailed calculations are provided for determining the thickness of individual shell courses based on parameters like height, allowable stress, and efficiency factor in accordance with equipment design codes.

    Original Title

    TANK DESIGN.xls

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains input design data and calculations for the thickness of shell plates and bottom plates for a storage tank. Specifically: - The storage tank has a diameter of 2m, total height of 2.3m, and holds sulfuric acid. - Calculations are shown for the thickness of two shell courses based on height, allowable stress, and efficiency factor, resulting in 5mm thickness for both. - The minimum nominal thickness for bottom and roof plates is determined to be 6mm according to design code standards. - Detailed calculations are provided for determining the thickness of individual shell courses based on parameters like height, allowable stress, and efficiency factor in accordance with equipment design codes.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    106 views2 pages

    Tank Design

    Uploaded by

    kamleshyadavmoney
    This document contains input design data and calculations for the thickness of shell plates and bottom plates for a storage tank. Specifically: - The storage tank has a diameter of 2m, total height of 2.3m, and holds sulfuric acid. - Calculations are shown for the thickness of two shell courses based on height, allowable stress, and efficiency factor, resulting in 5mm thickness for both. - The minimum nominal thickness for bottom and roof plates is determined to be 6mm according to design code standards. - Detailed calculations are provided for determining the thickness of individual shell courses based on parameters like height, allowable stress, and efficiency factor in accordance with equipment design codes.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    Sheet1

    S.No. Description Unit Values References


    A.1.0 Input Design Data
    Quantity of Tank Nos. 1 (Tech. Specification)
    Diameter of Tank, D m 2 (Tech. Specification)
    Total Tank Height of Shell, H1 m 2.3 (Tech. Specification)
    Maximum Design Liquid Level, H2 m 2.17
    Nominal Capacity, Q1 m³ 7.226 (Tech. Specification)
    Gross Capacity, Q2 m³ 6.817
    Effective Capacity, Q3 m³ 6.574
    Specific Gravity of H2SO4 1.875
    Design Density of liquid, ρ kg/m³
    Design Pressure, P Hydrostatic Head (Tech. Specification)
    Operating Temperature, T °C Ambient Temp. (Tech. Specification)
    Design Temperature, T °C 65 (Tech. Specification)
    Corrosion Allowance , C mm
    Joint Efficiency Factor, E 0.85
    Material of Construction IS 2062 Gr-B (Tech. Specification)
    Maximum Allowable working Stress,Sd MPa 165
    AllowableYield Stress, Sy MPa
    Width of Shell Plates, Ws m 1.5
    Width of Bottom Plates, m

    B.0 DETAILED CALCULATIONS.


    B.1.0. Calculation of Shell Plate Thickness.
    B.1.1 Number of Shell Coures Nos. 2

    Sr.No. Shell Course Waidth in Mtr. Cal. Thk.(mm) Thickness(mm)


    Course - 1 1.5 5
    Course - 2 0.5 5

    B.1.2 Thickness of 1st Course, t = (4.9xGxDx(H-0.3)/Sd xE) Page 22 & 23 of IS:803


    Height from the Bottom of course to bottom of overflow, H m 2.17
    Thickness of 1st Course, t mm 0.245
    Thickness of 1st Course Considered, ts1 mm 5 As per Clause No. 6.3.2.2, Page 23 of IS 803;

    B.1.3 Thickness of 2nd Course, t = (4.9xGxDx(H-0.3)/Sd xE) Page 22 & 23 of IS:803


    Height from the Bottom of course to bottom of overflow, H m 0.67
    Thickness of 2nd Course, t mm 0.0485
    Thickness of 2nd Course Considered, ts1 mm 5 As per Clause No. 6.3.2.2, Page 23 of IS 803;

    B.1.4 Bottom plate thickness, Tb


    As per Clause No. 6.2.1(a), Page 17 of IS 803;Minimum nominal thickness of uniformaly resting tank on ground is 6mm .

    B.1.4 Roof plate thickness, Tb


    As per Clause No. 6.2.1(a), Page 17 of IS 803;Minimum nominal thickness of uniformaly resting tank on ground is 6mm .

    Page 1
    Sheet1

    Page 2

    You might also like