C-spec

P.O. Box 27604, Concord, California 94527, +1-877-977-7999

Welder Performance Qualification (WPQ)
Created with C-spec software

Welder's name El Z. W. Test date 5/9/2000

ID Number 333-33-333 WPQ record number Pl-BT-V-EZW
Date of birth 1/25/1975 Standard test number 33 Rev. 0
Stamp number EZW-02 WPS record number P1-AT-Lh-CVN Rev. 0
Company name C-spec Qualification code ASME Section IX
Division
BASE METALS (QW -403)
Product form Specification (type or grade) P no. Grp-no. Size Sch. Thick. (in.) Dia. (in.)

Plate SA-516 (60) 1 1 - - 1 -

Welded to: Plate SA-516 (60) 1 1 - - 1 -

Joint type Groove

VARIABLES Actual values RANGE QUALIFIED
Type of weld joint Plate - Groove Groove and Fillet welds
Base metal P1 to P1 P-no./S-no. 1 thru 11, 34, 41 thru 47
BASE METAL THICKNESS Groove Fillet Overlay Groove Fillet Overlay
Plate thickness (in.) 1 - - no limit no limit -
Pipe/tube thickness (in.) - - - no limit no limit -
Pipe diameter (in.) - - - 2.875 min no limit -
PROCESS VARIABLES Actual values RANGE QUALIFIED
Welding process GTAW SMAW FCAW GTAW SMAW FCAW
Type Manual Manual Semi-automatic Manual Manual Semi-automatic
Backing None Yes Yes With, without With With
Filler metal specification 5.18 5.1 5.20 5.xx 5.xx 5.xx
Filler metal classification ER70S-2 E7018 E70T-2 Any Any Any
Filler metal F-number 6 4 6 6 1..4 6
Filler metal variety (QW-404.23) Bare (solid) - - Solid, metal cored - -
Consumable insert None - - Without - -
Number of layers deposited 3 3 3
Weld deposit thickness (in.) 0.125 0.125 0.125 0.25 max 0.25 max 0.25 max
Weld position (Actual position tested) 3G 3G 3G
Groove - Plate & Pipe >24" F,V F,V F,V
Groove - Pipe 2.875" to 24" F F F
Groove - Pipe < 2.875" - - -
Fillet - Plate & Pipe >24" F,H,V F,H,V F,H,V
Fillet - Pipe 2.875" to 24" F,H,V F,H,V F,H,V
Fillet - Pipe < 2.875" F,H,V F,H,V F,H,V
Progression Up Up Up Up Up Up
Backing gas Without - Without With, without - With, without
GMAW transfer mode (QW-409) - - Spray - - Spray, pulse, globular
GTAW welding current/polarity DCSP - - DCSP - -
TESTS
Type of test Acceptance criteria Result Comments

2 transverse side bends per QW-161.1 and QW-462.2 QW-163 Acceptable see - ASME IX - QW-452.1 (a)
Visual examination per QW-302.4 QW-194 Acceptable see - ASME IX - QW-452.1 (a)

Notes
CERTIFICATION
Tests conducted by Test Lab Laboratory test number WPQ-100
Mechanical tests by Test Lab2 Test file number TL2-WPQ-100
We certify that the statements in this record are correct and that the test welds were prepared, welded and tested in accordance with the requirements of Section IX of the ASME Code.

Welding Engineer Q.A. Manager

Name Signature Name Signature
N.G. Neer Q. M. Anager
Date Date
5/16/2000 5/17/2000

WeldOffice 2005.01.01 (c) Copyright 2005 C-spec Software. All rights reserved worldwide.
Catalog n° WPQ00009 Page 1 of 1