M1000230AC5M

1000W M47
Metal Halide
Specification Sheet 50Hz CWA
Input Volts 220 230 240
Regulation
Line Volts ±10% ±10% ±10% ±10% ±10%
Lamp Watts ±10% ±10% ±10% ±10% ±10%

Power Factor (min) 90% 90% 90% 90% 90%

Input Watts 1080 W 1080 W 1080 W 1080 W 1080 W
230 V (BLK) CAP LAMP
NOM. Open Circuit Voltage 420 V 420 V 420 V 420 V 420 V
( RED) (RED/BLK)
Line Current (Amps)
Operating 4.70 4.70 4.70
Open Circuit 2.05 2.30 2.70
Starting 3.80 3.65 3.50

Recommended Fuse (Amps) 15 15 15 0 0

Lamp Dropout Voltage (Line) 160 V 160 V 160 V V V COM ( YEL) COM ( YEL)

UL Temperature Ratings
Insulation Class H (180°C) H (180°C) H (180°C) H (180°C) H (180°C) Wiring Diagram
Temperature Code C
-22°F -30°C -22°F -30°C -22°F -30°C -22°F -30°C -22°F -30°C 0.250 Dia Thru
MIN. Starting Temperature 8 Holes
A
CAPACITOR Specifications B
Microfarads 30 uf 30 uf 30 uf 30 uf 30 uf MAX
Volts (min.) 460 V 460 V 460 V 460 V 460 V

50Hz Test Procedures 4.250"

375 - 460 375 - 460 375 - 460 375 - 460 375 - 460 0.250 Dia Thru
Secondary Open Ckt Voltage (V) 2 Holes
Secondary Current Shorted (A) 5.20 - 6.40 5.20 - 6.40 5.20 - 6.40 5.20 - 6.40 5.20 - 6.40

Input Operating Current (A) 4.25 - 5.20 4.25 - 5.20 4.25 - 5.20 - -
Input Open Circuit Current (A) 1.00 - 3.15 1.15 - 3.30 1.50 - 3.70 - -
Input Short Circuit Current (A) 3.15 - 4.70 2.95 - 4.50 2.75 - 4.30 - -
3.875"

60Hz Test Procedures 4.375"

395 - 480 395 - 480 395 - 480 395 - 480 395 - 480 5.375"
Secondary Open Ckt Voltage (V)
5.750"
Secondary Current Shorted (A) 7.60 - 9.30 7.60 - 9.30 7.60 - 9.30 7.60 - 9.30 7.60 - 9.30

Input Open Circuit Current (A) 0.75 - 1.75 0.65 - 1.90 0.95 - 2.15 - -
Input Short Circuit Current (A) 5.85 - 8.75 5.85 - 8.75 5.85 - 8.75 - - Reference Drawing

High Potential
2000 V 2000 V 2000 V 2000 V 2000 V
Capacitor: 005-11097-MF Ignitor: None
Test 1 Minute
Test 1 Second 2500 V 2500 V 2500 V 2500 V 2500 V Temp Rating: 90 °C

Core and Coil Specifications Height: 3.95 in

Dimension A 3.40 in 3.40 in 3.40 in 3.40 in 3.40 in Width / Diameter: 2.91 in
Dimension B 5.30 in 5.30 in 5.30 in 5.30 in 5.30 in
Weight 21 lbs 21 lbs 21 lbs 21 lbs 21 lbs
Lead Lengths (inches) 12-14 12-14 12-14 12-14 12-14
Coil Material (Pri. / Sec.) Cu / Al Cu / Al Cu / Al Cu / Al Cu / Al
This Ballast
does not
Document #: 010-12386-02 require a
Ignitor
Date: 9/26/2017
Status: Production
Replaces Catalog #: New Design
A For alternate capacitor construction consult sales

Data is based upon tests performed by Universal Lighting Technologies in a controlled environment and is representative of relative performance.
Actual performance may vary depending on operating conditions. Specifications are subject to change without notice.

9/18/2017
Universal Lighting Technologies
51 Century Blvd. Suite 230 - Nashville, TN 37214
Phone 1-800-225-5278 Fax 1-800-206-0035
www.unvlt.com