VPSB7118 PDF
VPSB7118 PDF
VPSB7118 PDF
VPSB7118DP
VPSP7118DP-AN (Optional network input module)
Integrated
Subwoofer System
VPSB7118DP-CN (Optional input module with digital audio)
Key Features:
Powered 18" Sub-woofer
Loudspeaker System with JBL
DrivePack® technology for portable
or installed use
3600 watts peak power, 1800 watts
continuous
18-inch Differential Drive®
low-frequency driver for extended
low-frequency output
Stylized and ergonomically designed
powder-coated die-cast aluminum
handles
Eight 3-inch fly track suspension
points and twenty-four M10 fittings
(optional detachable flying fittings
and forged eye bolt kits available)
Optional DPAN or DPCN
(CobraNet™) digital audio input
modules available for HiQnet™
network control Specifications:
Frequency Response (+/-3 dB): 39 Hz - 145 Hz
Applications: Frequency Range (-10 dB):
Maximum Peak Output1:
29 Hz - 165 Hz
129 dB SPL 1m
High-impact audio/visual Transducer Section:
presentations Low Frequency Section: JBL 2268G, 457 mm (18 in) dia., 76 mm (3 in) Dual Coil,
Theatrical sound design Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 4 ohms
Houses of Worship System:
Sound reinforcement rental companies DP1 Internal Amplification Output
Live performance venues (at nominal load): 3600 Watts Peak, 1800 Watts Continuous
DP1 Output Section: 1-Channel, Class I
Performing arts centers
Audio Input connector: XLR with loop-through
Corporate learning centers Network control connector: Ethernet, RJ45 (DPAN, DPCN options)
Themed entertainment venues Signal Processing: DSP based, resident in Input Module. See page 2 For
The VPSB7118DP is a powered 18" input module specifications.
System Management: DSP based limiters for mechanical and thermal
integrated sub-woofer loudspeaker protection
system featuring 3600 watts of peak AC Power Operating Range: Auto Select 90-132VAC/216-264VAC, 50/60 Hz
output power, 1800 watts continuous, AC Line Voltage: 50/60 Hz, Auto-Detect; 120V/240V (-15%, +10%)
and onboard digital signal processing. AC Input Connector: Neutrik PowerCon (NAC 3MPA)
Designed in cooperation with Crown AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
International, the JBL DrivePack® AC Current Requirement: 6A per system at 120V, 3A per system at 240V
DP-1 features leading-edge Enclosure:
technology such as patented high Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
efficiency Class-I power amplifier braced. Black DuraFlex™ finish.
technology. Network control and Suspension System: 8 standard air-cargo 3 in. track and 24 M10 fittings.
monitoring is optionally available via Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
System Architect software.
Dimensions (H x W x D): 514.4 x 701.8 x 812.8 mm
The VPSB7118DP transducer is 20.25 x 27.63 x 32 in.
JBL’s 2268G 18" diameter Differential Net Weight: 54 kg (129 lb)
Drive® woofer. 1
Measured with IEC shaped noise in free field conditions.
VPSB7118DP Powered 18" Integrated Subwoofer System
Input module characteristics and options
Features
Description DPIP DPAN DPCN
(standard input module) (optional HiQnet network (optional HiQnet network
input module) input module) input module; digital audio)
HiQNet Compliant No Yes Yes
Network Communication No 100MB Ethernet 100MB Ethernet
Network Connections N/A RJ-45, CAT5 RJ-45, CAT5
Audio signal format Analog Analog Digital with analog backup
CobraNet™ digital audio over ethernet No No Yes
Level Controls Attenuator, 16dB range Network Controllable Network Controllable
Remote Load Monitoring No Yes Yes
User Assignable Filters No 16 16
User Accessible Delays No Yes Yes
Noise Generator No Pink, White Pink, White
Sine Wave Generator No Continous, Burst Continuous, Burst
User Assignable Filter Types None 9 9
Error Reporting No Yes, via software Yes, via software
Digital Speaker Setting Presets 2, fixed 10, user assignable 10, user assignable
Polarity Reverse No Yes, via software Yes, via software
Listen Bus line level remote monitor No No Yes
Firmware upgrades via network No Yes Yes
Mute No Remote via network Remote via Network
Specifications
Analog Audio Input Connectors XLR, female XLR, female XLR, female
Input Type Electronically Balanced, RF Filtered
Signal Loop-through XLR, male, passive pass-through
Input Impedance 20K Ohms Bal 20K Ohms Bal 20K Ohms Bal
Polarity (+) voltage on XLR pin 2 yields (+) LF pressure
Input Sensitivity at 1m 0 dBu: 116 dB spl 0 dBu: 116 dB spl 0 dBu: 116 dB spl
0 dBV: 114 dB spl 0 dBV: 114 dB spl 0 dBV: 114 dB spl
(Input attenuator set at 0 dB) (Internal sensitivity set to +4dBu) (Internal sensitivity set to +4 dBu)
Max Input Level +23 dBu
Frequency Response 20 Hz – 20K Hz ± 0.5 dB
DSP Processing dbx Type IV analog-to- 24 Bit conversion, 32 bit 24 Bit conversion, 32 bit
digital conversion circuitry floating point processing floating point processing
Dynamic Range (20-20 KHz) > 107 dB (A Weighted) > 110 dB (A Weighted) > 110 dB (A Weighted)
THD+N (20-20 KHz), rated power < 0.5%
Crosstalk > 60 dB @ 1kHz
User Programmable Signal Delay N/A 2 seconds 2 seconds
Front Panel Controls Gain, Sub Filter Enable Enable ALT Preset Enable ALT Preset
Front Panel Indicators Signal/clip, ready, thermal, Signal/clip, ready, thermal, Signal/clip, ready, thermal,
fault, sub filter on/off fault, alt. preset select, fault, alt. preset select,
Network: activity, link Network: acivity, link,
CobraNet conductor
105
SPL (dB)
95
85
75
20 100 1000 10000 20000
120 Hz Lowpass
Frequency (Hz)
80 Hz Lowpass
812.8
(32.0)
701.8
(27.63)
812.8
TOP (32)
514.3
(20.25)
Dimensions
Dimensions in mm (in)
Accessories:
JBL offers a wide variety of accessories including rigging accessories
and transport covers. Please visit www.jblpro.com for a complete list
of VP Series accessories.
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A. SS VPSB7118DP
CRP 5M
A Harman International Company 01/07
© Copyright 2007 JBL Professional