The document describes dry block calibrators that can perform the functions of a dry block, standard thermometer, and calibrator. They control temperature in an insert to calibrate sensors and read electrical signals. Models reach temperatures from -50 to 155 degrees C and have automatic calibration capabilities with or without a computer.
The document describes dry block calibrators that can perform the functions of a dry block, standard thermometer, and calibrator. They control temperature in an insert to calibrate sensors and read electrical signals. Models reach temperatures from -50 to 155 degrees C and have automatic calibration capabilities with or without a computer.
The document describes dry block calibrators that can perform the functions of a dry block, standard thermometer, and calibrator. They control temperature in an insert to calibrate sensors and read electrical signals. Models reach temperatures from -50 to 155 degrees C and have automatic calibration capabilities with or without a computer.
The document describes dry block calibrators that can perform the functions of a dry block, standard thermometer, and calibrator. They control temperature in an insert to calibrate sensors and read electrical signals. Models reach temperatures from -50 to 155 degrees C and have automatic calibration capabilities with or without a computer.
The T-25N, T-35N and T-50N Dry Block Calibrators perform The T-25N, T-35N and T-50N models control temperature over functions that would require three different types of an insert in order to calibrate thermocouples, instruments: dry block calibrator, standard thermometer and thermoresistances, glass thermometers, thermoswitches etc. calibrator for TCs, RTDs, mA, mV, ohms and thermoswitches. Besides providing high accuracy temperature values, they also allow the measurement of signals generated by the • Model T-50N generates the coolest temperature available thermocouples, thermoresistances and thermoswitches, for a Presys dry block. It reaches –50 °C in an ambient which are being calibrated. This is possible due to an embedded temperature of 23 °C, with no need of well insulator. calibrator specific for these types of signal, including 4-20 mA. They incorporate the function of dry block, standard • Optional temperature measurement and control by external thermometer and calibrator for RTD and TC sensors, besides probe with Callendar-Van Dusen coefficients. mA reading. They present a wide range of programming resources, allowing them to perform automatic calibration of • Resolution of 0.01 °C. the sensors. In this case, the sensor is placed in the insert and its electrical terminals are connected to the embedded • Stability of ± 0.02 °C for all range of temperature. calibrator, the operator defines the calibration points and the • Input for RTD, thermocouples and thermoswitches. number of repetitions, then the process is started so that all the sequence is automatically accomplished. • Internal regulated 24 Vdc power supply and mA input Another way of performing automatic documented calibrations for 2-wire transmitters. is by means of ISOPLAN® calibration software for PC/WindowsTM which uses the RS-232 serial port to connect PC to the • Completely automatic calibration with or without the use dry block. With ISOPLAN® it is possible to register sensors and of a computer. instruments of the factory, generate work orders, create and print calibration certificates and reports, i.e., it brings all • Documenting capabilities: connection with computer and the advantages of computer data management to the ISOPLAN® calibration software. calibration environment.
EMEN T SYS AG TE N MA
Q U A L I TY presys Technical Specifications T-25N T-35N T-50N Operating Range: -25 °C to +155 °C -35 °C to +155 °C -50 °C to +155 °C ambient temperature: 23 °C Accuracy: internal reference ± 0.1 °C with external probe ± 0.07 °C Resolution: 0.01 °C Stability: ± 0.02 °C Axial Uniformity (40 mm) Dry Block: ± 0.05 °C Full range ± 0.06 °C Full range ± 0.07 °C Full range Radial Uniformity Dry Block: ± 0.01 °C Full range ± 0.01 °C Full range ± 0.02 °C Full range Heating Time: 10 min (25 °C to 140 °C) 16 min (25 °C to 140 °C) 11 min (25 °C to 140 °C) Cooling Time: 11 min (25 °C to -25 °C) 16 min (25 °C to -35 °C) 25 min (25 °C to -50 °C) Temperature Uniformity: 0.05 °C Weight: 10.5 kg 10.5 kg 12.5 kg Power Supply: 115 or 230 Vac, 50/60 Hz Electric Power: 200 W 300 W 400 W Units / Temperature Scales: °C or °F / IPTS-68 or ITS-90, user selectable Display: Graphic vacuum fluorescent with contrast adjustment Well Diameter / Depth: Ø 25.4 mm (1”) / 124 mm Dimension (HxWxD): 260 x 180 x 270 mm 315 x 180 x 270 mm
Electrical Input Ranges Specifications
Input Ranges Resolution Accuracy Remarks milivolt -150 to 150 mV 0.001 mV ± 0.01 % FS Rinput > 10 MΩ 150 to 2450 mV 0.01 mV ± 0.02 % FS auto-range mA -1 to 24.5 mA 0.0001 mA ± 0.02 % FS Rinput < 160 Ω resistance 0 to 400 Ω 0.01 Ω ± 0.01 % FS excitation current 0.9 mA 400 to 2500 Ω 0.01 Ω ± 0.03 % FS auto-range Pt-100 -200 to 850 °C / -328 to 1562 °F 0.01 °C / 0.01 °F ± 0.1 °C / ± 0.2 °F IEC-60751 Pt-1000 -200 to 400 °C / -328 to 752 °F 0.1 °C / 0.1 °F ± 0.1 °C / ± 0.2 °F IEC-60751 Cu-10 -200 to 260 °C / -328 to 500 °F 0.1 °C / 0.1 °F ± 2.0 °C / ± 4.0 °F MINCO 16-9 Ni-100 -60 to 250 °C / -76 to 482 °F 0.1 °C / 0.1 °F ± 0.2 °C / ± 0.4 °F DIN-43760 TC-J -210 to 1200 °C / -346 to 2192 °F 0.1 °C / 0.1 °F ± 0.2 °C / ± 0.4 °F IEC-60584 TC-K -270 to -150 °C / -454 to -238 °F 0.1 °C / 0.1 °F ± 0.5 °C / ± 1.0 °F IEC-60584 -150 to 1370 °C / -238 to 2498 °F 0.1 °C / 0.1 °F ± 0.2 °C / ± 0.4 °F TC-T -260 to -200 °C / -436 to -328 °F 0.1 °C / 0.1 °F ± 0.6 °C / ± 1.2 °F IEC-60584 -200 to -75 °C / -328 to -103 °F 0.1 °C / 0.1 °F ± 0.4 °C / ± 0.8 °F -75 to 400 °C / -103 to 752 °F 0.1 °C / 0.1 °F ± 0.2 °C / ± 0.4 °F TC-E -270 to -150 °C / -454 to -238 °F 0.1 °C / 0.1 °F ± 0.3 °C / ± 0.6 °F IEC-60584 -150 to 1000 °C / -238 to 1832 °F 0.1 °C / 0.1 °F ± 0.1 °C / ± 0.2 °F TC-N -260 to -200 °C / -436 to - 328 °F 0.1 °C / 0.1 °F ± 1.0 °C / ± 2.0 °F IEC-60584 -200 to -20 °C / -328 to -4 °F 0.1 °C / 0.1 °F ± 0.4 °C / ± 0.8 °F -20 to 1300 °C / -4 to 2372 °F 0.1 °C / 0.1 °F ± 0.2 °C / ± 0.4 °F TC-L -200 to 900 °C / -328 to 1652 °F 0.1 °C / 0.1 °F ± 0.2 °C / ± 0.4 °F DIN-43710 FS = Full Scale
Accuracy values are valid within one year and ambient temperature range from 20 to 26 °C. Outside these limits add 0.001 % FS / °C, taking 23 °C as the reference temperature. For thermocouples with internal cold junction compensation, add a cold junction compensation error of ± 0.2 °C or ± 0.4 °F. Order Code T-25N / T-35N / T-50N ─ ─ IN Power Supply 1 - 115 Vac 2 - 230 Vac Included Insert Choose between the inserts listed below. Unless specified, the accompanying insert is IN06. Accessories Inserts: Holes Order Code IN01 1x 3/4" 06.04.0011-00 IN02 1x 1/2" 06.04.0012-00 IN03 1x 6.0 mm and 3x 1/4" 06.04.0013-00 IN04 3x 6.0 mm and 1x 1/4" 06.04.0014-00 IN05 4x 6.0 mm 06.04.0015-00 IN06 2x 6.0 mm and 2x 1/4" 06.04.0016-00 IN07 1x 6.0 mm 1x 8.0 mm and 1x 3/8" 06.04.0017-00 IN08 1x 6.0 mm 1x 3.0 mm and 2x 1/4" 06.04.0018-00 IN09 Without hole, to be drilled by the client 06.04.0019-00 IN10 Others, under ordering 06.04.0020-00 IN1P 1x 3.0 mm 1x 6.0 mm, 1x 8.0 mm, 1x 1/4” 06.04.0121-00 IN1A 1x 1/8”, 1x 3/16”, 2x 1/4”, 1 3/8” 06.04.0122-00 IN1E 1x 4.0 mm, 1x 6.0 mm, 1x 8.0 mm,1x 10.0 mm, 1x 1/4” 06.04.0123-00
Serial Communication: Modbus® RTU Protocol (RS-232/RS-485). Optional Accessories:
Included Items: soft carrying case, strap, insert (selectable), Temperature Sensors: 1/5 DIN Probe-R - Order Code: 04.06.0001-21; container for steel balls, tiny steel balls, insert extractor tool, test 1/5 DIN Probe-A - Order Code: 04.06.0007-21; leads, manual and power cord. Communication Interface - Order Code: 06.02.0002-00
