Scribd Logo
Upload

Welcome to Scribd!

  • 98 views

    Technical Data - LUPOLEN 5261 Z

    Uploaded by

    Cristhian Huanqui Tapia
    kj

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Technical Data - LUPOLEN 5261 Z

    Uploaded by

    Cristhian Huanqui Tapia
    98 views3 pages
    kj

    Original Title

    Technical Data_LUPOLEN 5261 Z

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    kj

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    98 views3 pages

    Technical Data - LUPOLEN 5261 Z

    Uploaded by

    Cristhian Huanqui Tapia
    kj

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Technical Data Sheet

    Lupolen 5261Z HI
    High Density Polyethylene

    Product Description
    Lupolen 5261Z HI is a high density polyethylene with outstanding impact resistance, high rigidity, good chemical
    resistance and good ESCR. It is delivered in powder form and contains antioxidants. Typical customer
    applications include L-ring drums for the packaging of dangerous goods. Lupolen 5261Z HI is not intended for
    use in medical and pharmaceutical applications.
    Regulatory Status
    For regulatory compliance information, see Lupolen 5261Z HI Product Stewardship Bulletin (PSB) and Safety
    Data Sheet (SDS).

    Status Commercial: Active


    Availability Africa-Middle East; Asia-Pacific; Australia and New Zealand; Europe; South & Central
    America
    Application Drums; Industrial Packaging
    Market Industrial Packaging
    Processing Method Extrusion Blow Molding
    Attribute Antioxidant; Good Chemical Resistance; High ESCR (Environmental Stress Cracking
    Resistance); High Impact Resistance; High Rigidity

    Nominal
    Typical Properties Value Units Test Method
    Physical
    Melt Flow Rate, (190 °C/21.6 kg) 2.0 g/10 min ISO 1133-1
    Density 0.954 g/cm³ ISO 1183-1
    Bulk Density >0.460 g/cm³ ISO 60
    Intrinsic Viscosity 500 ml/g ISO 1628-3
    Mechanical
    Tensile Modulus 1200 MPa ISO 527-1, -2
    Tensile Stress at Yield 28 MPa ISO 527-1, -2
    Tensile Strain at Yield 8 % ISO 527-1, -2
    FNCT, (3.5 MPa, 2% Arkopal N100, 80 °C) 12 hr ISO 16770
    Impact
    Tensile Impact Strength 280 kJ/m² ISO 8256
    Note: notched, type 1, method A, -30 °C
    Hardness
    Ball Indentation Hardness, (H 132/30) 52 MPa ISO 2039-1
    Thermal
    Vicat Softening Temperature, (A/50 N) 133 °C ISO 306
    Deflection Temperature Under Load
    (0.45 MPa, Unannealed) 75 °C ISO 75B-1, -2
    (1.80 MPa, Unannealed) 44 °C ISO 75A-1, -2
    Processing Parameters
    Melt Temperature 190 - 220 °C

    LyondellBasell Lupolen 5261Z HI


    Technical Data Sheet Recipient Tracking #:
    Date: 1/15/2020 Page 1 of 3 Request #: 2226954
    Notes
    These are typical property values not to be construed as specification limits.
    Processing Techniques
    Users should determine the conditions necessary to obtain optimum product properties and suitability of the
    product for the intended application.
    In cases where higher temperatures are required, please contact your appropriate technical contact for support.
    Further Information
    Health and Safety:
    The resin is manufactured to the highest standards, but special requirements apply to certain applications such
    as food end-use contact and direct medical use. For specific information on regulatory compliance contact your
    local representative.

    Workers should be protected from the possibility of skin or eye contact with molten polymer. Safety glasses are
    suggested as a minimal precaution to prevent mechanical or thermal injury to the eyes.

    Molten polymer may be degraded if it is exposed to air during any of the processing and off-line operations. The
    products of degradation may have an unpleasant odor. In higher concentrations they may cause irritation of the
    mucus membranes. Fabrication areas should be ventilated to carry away fumes or vapours. Legislation on the
    control of emissions and pollution prevention should be observed.

    The resin will burn when supplied with excess heat and oxygen. It should be handled and stored away from
    contact with direct flames and/or ignition sources. While burning, the resin contributes high heat and may
    generate a dense black smoke.

    Recycled resins may have previously been used as packaging for, or may have otherwise been in contact with,
    hazardous goods. Converters are responsible for taking all necessary precautions to ensure that recycled resins
    are safe for continued use.

    For further information about safety in handling and processing please refer to the Safety Data Sheet.
    Conveying:
    Conveying equipment should be designed to prevent production and accumulation of fines and dust particles
    that are contained in polymer resins. These particles can under certain conditions pose an explosion hazard.
    Conveying systems should be grounded, equipped with adequate filters and regularly inspected for leaks.
    Storage:
    The resin is packed in 25 kg bags, octabins or bulk containers protecting it from contamination. If it is stored
    under certain conditions, i. e. if there are large fluctuations in ambient temperature and the atmospheric humidity
    is high, moisture may condense inside the packaging. Under these circumstances, it is recommended to dry the
    resin before use. Unfavorable storage conditions may also intensify the resin's slight characteristic odor.

    Resin should be protected from direct sunlight, temperatures above 40°C and high atmospheric humidity during
    storage. Higher storage temperatures may reduce the storage time.

    The information submitted is based on our current knowledge and experience. In view of the many factors that
    may affect processing and application, these data do not relieve processors of the responsibility of carrying out
    their own tests and experiments; neither do they imply any legally binding assurance of certain properties or of
    suitability for a specific purpose. This information does not remove the obligation of the customer to inspect the
    material on arrival and notify us of any faults immediately. It is the responsibility of those to whom we supply our
    products to ensure that any proprietary rights and existing laws and legislation are observed.
    Company Information

    For further information regarding the LyondellBasell company, please visit http://www.lyb.com/.

    © LyondellBasell Industries Holdings, B.V. 2018

    LyondellBasell Lupolen 5261Z HI


    Technical Data Sheet Recipient Tracking #:
    Date: 1/15/2020 Page 2 of 3 Request #: 2226954
    Disclaimer

    Information in this document is accurate to the best of our knowledge at the date of publication. The document is
    designed to provide users general information for safe handling, use, processing, storage, transportation,
    disposal and release and does not constitute any warranty or quality specification, either express or implied,
    including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether the
    product is suitable for their use and can be used safely and legally.

    In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or
    restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell
    representative.
    Trademarks

    The Trademark referenced within the product name is owned or used by the LyondellBasell family of companies.

    LyondellBasell Lupolen 5261Z HI


    Technical Data Sheet Recipient Tracking #:
    Date: 1/15/2020 Page 3 of 3 Request #: 2226954

    You might also like