ARI-ZIVA®-Z / ARI-ZIVA®-G

Butterfly valves
ARI-ZIVA®-Z - Fig. 014 - F
 ree of maintenance wafer pattern butterfly valve - soft sealed - industrial range
ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets - soft sealed - industrial range
®

ARI-ZIVA®-Z / ARI-ZIVA®-G
with notch lever

Page 6

ARI-ZIVA®-Z / ARI-ZIVA®-G
Fig. 014 -
with lock lever ARI-ZIVA®-Z

Page 6

ARI-ZIVA®-Z / ARI-ZIVA®-G
with worm gear
• With variable adjustment
• Self-locking

Page 6

ARI-ZIVA®-Z / ARI-ZIVA®-G
with electric rotary actuator ARI-OM Fig. 015 -
ARI-ZIVA®-G
• For short time duty S 2-5 Min.
(Periodic duty S3 30% ED)
• 230V 50Hz, 24V DC, 24V 50Hz
• Enclosure IP 67 Features:
Page 7 • Soft sealing
• Maintenance-free
• Good flow characteristic due to excellent Zeta-values
ARI-ZIVA®-Z / ARI-ZIVA®-G
• Nodular iron body
with electric rotary actuator Deufra • High quality epoxyd coating
• Type of operation, on/off S4 30% • EPDM (W270) / NBR / FPM lining
(for control S4 50%)
• Changeable lining, body detacheable
• 230V 50Hz (400V 50Hz)
• Straight through spindle with 3 supports
• Enclosure IP 67
• Spindle blow out protection
Page 8
• Stainless steel disc
• Shaft / Disc connection not in contact with the medium
ARI-ZIVA®-Z / ARI-ZIVA®-G • Complete insulation possible according to the german
with electric rotary actuator Auma „Energy saving order - EnEV“
• For short time duty S 2-15 Min. • Centrical disc bearing
(for control S4 25%) • Slip on flange DIN EN 1092-1
• 400V 50Hz (230V 50Hz) • EPDM with DIN DVGW Reg. drinking water
• Enclosure IP 68 (NW6201BQ0460)
• NBR-black with DIN DVGW Reg. Gas (NG4313BQ0462)
Page 9
• NBR-white acc. to Directive for Material and article in
contact with food decision
ARI-ZIVA®-Z / ARI-ZIVA®-G
ARI-ZIVA®-Z:
with pneumatic rotary actuator • Wafer type
AIR-TORQUE / bar
ARI-ZIVA®-G:
• Function: Double acting
• Lug type
• Function: Single acting, Spring closes on air failure
• As a pipe-end valve
(opens)
• Pipeline one-side detachable
• Actuating pressure 6 bar (=0,6 MPa)
Page 10 / 11

Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com! Data sheet 010002 englisch (english)
 ARI-ZIVA®-Z
Fig. 014
Butterfly valve with elongated eyelets - industrial range (SG iron)
Constructions

DN25-65 DN80-100

DN125-150 DN200

DN250-300 DN350

Considered
• EN 593 (EN-JS1030, EN-JS1049)
standards: DN400 DN450-600

Figure Nominal pressure Material Nominal diameter Disc Stem

20.014 (included in 22.014) PN6 DN25-600
EN-JS1030 1.4021+QT
21.014 (included in 22.014) PN10 DN25-600 1.4581
(EN-JS1049 on request) (optional: 1.4571)
22.014 PN16 DN25-600

Seat:
• EPDM -10 °C to +130 °C / NBR-black -10 °C to +80 °C / NBR-white -10 °C to +80 °C / FPM 0 °C to +150 °C (not for hot water useable)
Max. differential pressure:
• 16 bar (DN25-150) / 10 bar (DN200-600) / 10 bar (NBR-white DN25-300)
Actuation arrangement: (refer to page 6-11)
• Notch lever / Lock lever / Worm gear
• Electric actuator (ARI-OM, Deufra, Auma) / Pneumatic actuator (AIR-TORQUE, bar)
Test:
Sealing leakage test: • EN 12266-1 Leakage rate A (DIN 3230 T3 Leakage rate 1)
• EPDM DN25/32-600 for drinking water. Reg.-No. NW-6201BQ0460 acc. to DIN EN 1074-1/-2
DVGW-Registration:  • NBR-black DN25/32-600 for gas. Reg.-No. NG-4313BQ0462 acc. to DIN EN 13774
(Operating range - 10 °C to + 60 °C)
Directive for Material and article in contact with food
• NBR-white DN25-200 (acc. to EG/1935/2004)
decision:

Parts
Pos. Sp.p. Description Fig. 20./21./22.014
1 Body EN-GJS-400-15, EN-JS1030 (EN-GJS-400-18U-LT, EN-JS1049 on request)
2 x Seat EPDM 73 / NBR 73 (black) / NBR 68 (white) / FPM 73
3 Disc GX5CrNiMoN19-11-2, 1.4581
5 Stem X20Cr13+QT, 1.4021+QT (optional: X6CrNiMoTi17 12 2, 1.4571)
9 x Gasket CU
10 x Hexagon head screw plug 5.8-A2G
11 x O-ring EPDM 73 / NBR 73 / FPM 73
14 Parallel bush P1
26 x Washer for shaft protection X20Cr13+QT, 1.4021+QT
27 x Countersunk screw 8.8-A2G
└ Spare parts
Information / restriction of technical rules need to be observed!
Operating and installation instructions can be downloaded at www.ari-armaturen.com.
The engineer, designing a system or a plant, is responsible for the selection of the correct valve.
Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list).

2 Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!

 ARI-ZIVA®-Z
Construction / Installation variations

DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600

Face-to-face dimension FTF series 20 acc. to DIN EN 558-1

L (mm) 33 33 33 43 46 46 52 56 56 60 68 78 78 102 114 127 154

Dimensions
H (mm) 117 117 123 129 139 147 168 186 202 236 263 292 358 407 442 495 555
E (mm) 58 58 66 69 81 100 109 124 140 167 203 232 257 298 319 356 418
l (mm) 19 19 19 19 19 19 19 23 23 23 24 24 24 29 39 38 48
SW (mm) 11 11 11 11 11 11 11 17 17 17 22 22 22 27 36 36 46

Kvs-value / Zeta-value  Diagram refer to page 13.

Kvs-value (m3/h) 20 24 41 98 190 302 550 930 1525 3000 5000 7300 10260 13140 15200 20750 30430
Zeta-value -- 1,52 2,93 2,42 1,03 0,79 0,72 0,53 0,45 0,35 0,29 0,25 0,24 0,23 0,24 0,28 0,23 0,22

Standard-flange dimensions / Hexagon screw (Quantity, Thread, Length)

ØK (mm) 75 90 100 110 130 150 170 200 225 280 335 395 445 495 -- 600 705
n x Ød1 (mm) 4x11 4x14 4x14 4x14 4x14 4x18 4x18 4x18 4x18 4x18 4x18 4x22 8x22 4x22 -- 4x22 4x26
PN6 Screws (pcs.) 4 4 4 4 4 4 4 8 8 8 12 12 12 16 -- 16 8 16 8
Thread M10 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M20 M20 M20 -- M20 M20 M24 M24
Length (mm) 80 80 80 90 90 100 110 120 120 130 140 160 160 180 -- 220 50 250 70
ØK (mm) 85 100 110 125 145 160 180 210 240 295 350 400 460 515 565 620 725
n x Ød1 (mm) 4x18 4x18 4x18 4x18 4x18 4x18 4x18 4x18 4x22 4x22 4x22 4x22 4x22 4x28 4x28 4x28 4x36
PN10 Screws (pcs.) 4 4 4 4 4 8 8 8 8 8 12 12 16 16 16 8 16 8 16 8
Thread M12 M16 M16 M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 M24 M24 M24 M24 M24 M27 M27
Length (mm) 90 90 90 100 110 110 120 130 130 140 150 160 160 200 200 70 220 50 260 70
ØK (mm) 85 100 110 125 145 160 180 210 240 295 355 410 470 525 585 650 770
n x Ød1 (mm) 4x14 4x18 4x18 4x18 4x18 4x18 4x18 4x18 4x22 4x22 4x26 4x26 4x26 4x30 4x30 4x33 4x36
PN16 Screws (pcs.) 4 4 4 4 4 8 8 8 8 12 12 12 16 16 16 8 16 8 16 8
Thread M12 M16 M16 M16 M16 M16 M16 M16 M20 M20 M24 M24 M24 M27 M27 M27 M30 M30 M33 M33
Length (mm) 90 90 90 100 110 110 120 130 130 140 160 170 180 220 220 75 260 70 320 90

Weights
Fig. 20./21./22.014 (kg) 1,3 1,3 1,6 2,2 2,7 3,4 4,4 6,4 7,9 11,8 21 30,4 46,8 72 128 132,8 217,3

Mounting variations

ZIVA®-Z-Wafer-type-valve
Welding neck flanges
PN 6 / PN 10 / PN 16
DIN EN 1092-1 / 11 / B1 The installation between, to above deviating flanges, is not or
Hexagon screw under special care possible. Please consult us.
DIN EN ISO 4016 W.-No. 4.6
Hexagon nut
DIN EN ISO 4034 W.-No. 5

Intermediate values for max. permissible operational pressures can be determined by linear interpolation
Pressure-temperature-ratings
of the given temperature / pressure chart.

acc. to DIN EN 1092-2 PN -20°C to <-10°C -10°C to 120°C 130°C 150°C

EN-JS1030 16 (bar) -- 16 15,8 15,5
EN-JS1049 16 (bar) 16 16 15,8 15,5

Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com! 3

 ARI-ZIVA®-G
Fig. 015
Butterfly valve with threaded eyelets - industrial range (SG iron)
Constructions

DN25-65 DN80-150

DN200-300 DN350-400

Considered
• EN 593 (EN-JS1030, EN-JS1049)
standards: DN450-600

Figure Nominal pressure Material Nominal diameter Disc Stem

21.015 PN10 EN-JS1030 DN25-600 1.4021+QT
(EN-JS1049 on request) 1.4581
22.015 PN16 DN25-600 (optional: 1.4571)

Seat:
• EPDM -10 °C to +130 °C / NBR-black -10 °C to +80 °C / NBR-white -10 °C to +80 °C / FPM 0 °C to +150 °C (not for hot water useable)
Max. differential pressure:
• 16 bar (DN25-150) / 10 bar (DN200-600) / 10 bar (NBR-white DN25-200)
Actuation arrangement: (refer to page 6-11)
• Notch lever / Lock lever / Worm gear
• Electric actuator (ARI-OM, Deufra, Auma) / Pneumatic actuator (AIR-TORQUE, bar)
Test:
Sealing leakage test: • EN 12266-1 Leakage rate A (DIN 3230 T3 Leakage rate 1)
• EPDM DN25/32-600 for drinking water. Reg.-No. NW-6201BQ0460 acc. to DIN EN 1074-1/-2
DVGW-Registration:  • NBR-black DN25/32-600 for gas. Reg.-No. NG-4313BQ0462 acc. to DIN EN 13774
(Operating range - 10 °C to + 60 °C)
Directive for Material and article in contact with food
• NBR-white DN25-200 (acc. to EG/1935/2004)
decision:

Parts
Pos. Sp.p. Description Fig. 20./21./22.014
1 Body EN-GJS-400-15, EN-JS1030 (EN-GJS-400-18U-LT, EN-JS1049 on request)
2 x Seat EPDM 73 / NBR 73 (black) / NBR 68 (white) / FPM 73
3 Disc GX5CrNiMoN19-11-2, 1.4581
5 Stem X20Cr13+QT, 1.4021+QT (optional: X6CrNiMoTi17 12 2, 1.4571)
9 x Gasket CU
10 x Hexagon head screw plug 5.8-A2G
11 x O-ring EPDM 73 / NBR 73 / FPM 73
14 Parallel bush P1
26 x Washer for shaft protection X20Cr13+QT, 1.4021+QT
27 x Countersunk screw 8.8-A2G
└ Spare parts
Information / restriction of technical rules need to be observed!
Operating and installation instructions can be downloaded at www.ari-armaturen.com.
The engineer, designing a system or a plant, is responsible for the selection of the correct valve.
Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list).

4 Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!

 ARI-ZIVA®-G
Construction / Installation variations

DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600

Face-to-face dimension FTF series 20 acc. to DIN EN 558-1

L (mm) 33 33 33 43 46 46 52 56 56 60 68 78 78 102 114 127 154

Dimensions
H (mm) 117 117 123 129 139 147 168 186 202 236 263 292 358 407 442 495 555
E (mm) 58 58 66 69 81 100 109 124 140 167 203 232 257 298 319 356 418
l (mm) 19 19 19 19 19 19 19 23 23 23 24 24 24 29 39 38 48
SW (mm) 11 11 11 11 11 11 11 17 17 17 22 22 22 27 36 36 46

Kvs-value / Zeta-value  Diagram refer to page 13.

Kvs-value (m3/h) 20 24 41 98 190 302 550 930 1525 3000 5000 7300 10260 13140 15200 20750 30430
Zeta-value -- 1,52 2,93 2,42 1,03 0,79 0,72 0,53 0,45 0,35 0,29 0,25 0,24 0,23 0,24 0,28 0,23 0,22

Standard-flange dimensions / Hexagon screw (Quantity, Thread, Length)

ØK (mm) 85 100 110 125 145 160 180 210 240 295 350 400 460 515 565 620 725
nxM (mm) 4xM12 4xM16 4xM16 4xM16 4xM16 8xM16 8xM16 8xM16 8xM20 8xM20 12xM2012xM2016xM2016xM24 20xM24 20xM24 20x27
PN10 Screws (pcs.) 8 8 8 8 8 16 16 16 16 16 24 24 32 32 32 8 32 8 32 8
Thread M12 M16 M16 M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 M24 M24 M24 M24 M24 M27 M27
Length (mm) 30 30 30 35 35 40 40 45 45 50 55 55 60 70 80 70 85 50 100 70
ØK (mm) 85 100 110 125 145 160 180 210 240 295 355 410 470 525 585 650 770
nxM (mm) 4xM12 4xM16 4xM16 4xM16 4xM16 8xM16 8xM16 8xM16 8xM20 12xM2012xM2412xM2416xM2416xM27 20xM27 20xM30 20xM33
PN16 Screws (pcs.) 8 8 8 8 8 16 16 16 16 24 24 24 32 32 32 8 32 8 32 8
Thread M12 M16 M16 M16 M16 M16 M16 M16 M20 M20 M24 M24 M24 M27 M27 M27 M30 M30 M33 M33
Length (mm) 30 30 30 35 35 40 40 45 45 50 55 60 60 75 85 75 100 70 120 90

Weights
Fig. 21./22.015 (kg) 1,8 1,8 2 2,7 3,2 4,8 6,2 8,6 10,5 15,8 26,6 37,6 60 93,4 129 175,7 286,5

Mounting variations

When used on end of line applications, a safety precaution (blind

flange, etc.) is recommended.
ZIVA®-G-Wafer-type-valve ZIVA®-G-Pipe-end-valve To ensure the seat tightness, a blind or counter flange is
Welding neck flanges Welding neck flanges necessary.
PN 10 / PN 16 PN 10 / PN 16 The installation between deviating flanges is not or only under
DIN EN 1092-1 / 11 / B1 DIN EN 1092-1 / 11 / B1 special care possible. Please consult us.
Hexagon screw Hexagon screw For all installation, modification or maintenance work, please
DIN EN ISO 4016 W.-No. 4.6 DIN EN ISO 4016 W.-No. 4.6 observe regulations in force and the ARI-operating instructions.

Intermediate values for max. permissible operational pressures can be determined by linear interpolation
Pressure-temperature-ratings
of the given temperature / pressure chart.

acc. to DIN EN 1092-2 PN -20°C to <-10°C -10°C to 120°C 130°C 150°C

EN-JS1030 16 (bar) -- 16 15,8 15,5
EN-JS1049 16 (bar) 16 16 15,8 15,5

Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com! 5

 ARI-ZIVA®-Z / ARI-ZIVA®-G
Notch lever / Lock lever / Worm gear

ARI-ZIVA®-Z / ARI-ZIVA®-G with manual actuation arrangement

Notch lever
For diameters larger than DN 125 we recommend using a gear mechanism. Gear
recommended for inaccessible installation (see below).

(till valve center)

Note:
If seat is of NBR-white, from DN125 upwards a gear is necessary!

Lock lever
• Cap convertable for lock lever
• Variable adjustment (with 0 - 90° angle positioning) (With variable adjustment)
For diameters larger than DN 125 we recommend using a gear mechanism. Gear
recommended for inaccessible installation (see below).
(till valve center)

Worm gear
• With variable adjustment
• Self-locking
Stop screw
Lock nut

Position indicator
(till valve center)

The SHUT-position can be adjusted to ±5° by a locking screw.

Parts
Pos. Sp.p. Description Fig. 20./21./22.014; 21./22.015
7 x Lever cap S235JR, 1.0037 (KTL-coating)
20 x Hexagon nut 5-A2B
21 x Cheese head screw 8.8-A2B
50 Notch lever EN-GJS-400-15, EN-JS1030 (KTL-coating)
50 Lock lever DC01, 1.0330 (surface treatment)
50 Worm gear
└ Spare parts

DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600

Dimensions
with lever (mm) 180 180 186 192 202 210 231 257 273 307 -- -- -- -- -- -- --
H1
with gear (mm) 199 199 205 211 221 229 250 268 284 339 415 445 510 591 780 833 903
P1 (mm) 184 184 184 184 184 184 184 273 273 273 -- -- -- -- -- -- --
P2 (mm) 147 147 147 147 147 147 147 147 147 147 249 244 244 333 361 361 365
ØC (mm) 125 125 125 125 125 125 125 125 125 125 250 250 250 300 600 600 600
Type of gear 242-10S 242-10S 242-10S 242-10S 242-10S 242-10S 242-10S 242-10M 242-10M 242-10M 242-20M 242-30S 242-30S 242-30L 242-40M 242-40M AB1250N

Weights
ZIVA®-Z (kg) 2 2 2,4 2,9 3,5 4,1 5,1 7,7 9,2 13,1 -- -- -- -- -- -- --
with lever
ZIVA®-G (kg) 2,6 2,5 2,7 3,5 4,1 5,6 6,9 9,9 11,8 17,1 -- -- -- -- -- -- --
ZIVA®-Z (kg) 3,2 3,2 3,5 4,1 4,6 5,3 6,3 8,3 9,8 13,7 26 35,4 51,8 80,5 139 164 248
with gear
ZIVA®-G (kg) 3,7 3,7 3,9 4,6 5,2 6,8 8,1 10,5 12,4 17,7 31,6 42,6 65 102 140 207 317

6 Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!

 ARI-ZIVA®-Z / ARI-ZIVA®-G
ARI-OM
Butterfly valve with electric rotary actuator
Type: ARI-OM
• For short time duty S 2-5 Min.
(Periodic duty S3 30% duty cicle, max. 60 c/h,
max. modulating torque = ca. 50% rated torque)
• Enclosure IP 67
• Temperature guard in the motor
Voltages:
• 230V 50Hz
• 24V AC/DC
(Other voltages on request)
Accessories:
• Potentiometer (1000 Ohm)
• Positioner 4-20 mA
• Position-transmitter 4-20 mA
• Heating
• Travel switch
For connection refer to terminal connection in the operating instructions of the
actuator !

Seat: EPDM / NBR-black / FPM

DN 25 32 40 50 65 80 100 125 150 200 250 300*

Actuator
Type of actuator OM-1 OM-A OM-2 OM-3 OM-4
Operating time (s) 13 24 17 26 18

Dimensions
H1 (mm) 267 267 273 279 289 297 368 441 457 491 583 612
P1 (mm) 35 35 35 35 35 35 54 82 82 82 94 94
P2 (mm) 80 80 80 80 80 80 54 118 118 118 126 126
P3 (mm) 54 54 54 54 54 54 54 100 100 100 110 110
P4 (mm) 54 54 54 54 54 54 54 230 230 230 262 262

Weights
ZIVA®-Z (kg) 3,3 3,3 3,6 4,2 4,7 5,4 7,4 15,4 16,9 20,8 38,5 47,9
ZIVA®-G (kg) 3,8 3,8 4,0 4,7 5,3 6,8 9,2 17,6 19,5 24,8 44,1 55,1

Seat NBR-white on request.

* Max. diferential pressure against tight shut off 6 bar.

Operating and installation instructions can be downloaded at www.ari-armaturen.com.

Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com! 7

 ARI-ZIVA®-Z / ARI-ZIVA®-G
Deufra
Butterfly valve with electric rotary actuator
Type: Deufra
• Type of operation on/off S4 30% (optional: for control S4 50%)
• Enclosure IP 67
• Temperature guard in the motor
• Heating
Voltages:
• 230V 50Hz
• 400V 50Hz (nicht bei SQ4)
Other voltages on request
Accessories:
• Travel switch
• Potentiometer
• Valve positioner 0-10V / 4-20mA
• Position-transmitter
Special actuators:
• Reset to start on failure Type FQ
For connection refer to terminal connection in the operating instructions of the
actuator !

Seat: EPDM / NBR-black / FPM

DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600

Actuator
Type of actuator SQ4 SQ6 SQ10 SQ15 SQ25 SQ60 SQ120 SQ250
Operating time (s) 6 6 6 15 10 30 30 70

Dimensions
H1 (mm) 341 341 347 353 363 371 392 410 426 460 443 517 583 618 655 706 836
h (mm) 53 53 53 53 53 53 53 53 53 53 100 100 100 86 86 86 70
ØC (mm) 60 60 60 60 60 60 60 60 60 100 160 250 250 250 250 250 300
P1 (mm) 90 90 90 90 90 90 90 90 90 98 167 169 169 172 172 172 475
P2 (mm) 160 160 160 160 160 160 202 202 202 260 312 340 340 392 392 392 188
P3 (mm) 65 65 65 65 65 65 65 65 65 65 89 89 89 133 133 133 130
P4 (mm) 125 125 125 125 125 125 125 125 125 125 226 226 226 284 284 284 333

Weights
ZIVA®-Z (kg) 7,3 7,3 7,6 8,2 8,7 9,4 10,4 13,4 14,9 19,8 41 49,4 65,8 101 159 161,8 287,2
ZIVA®-G (kg) 7,8 7,8 8 8,7 9,3 10,9 12,2 15,6 17,5 23,8 46,6 56,6 79 122,4 160 204,7 356,2

Seat NBR-white on request.

Operating and installation instructions can be downloaded at www.ari-armaturen.com.

8 Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!

 ARI-ZIVA®-Z / ARI-ZIVA®-G
Auma
Butterfly valve with electric rotary actuator
Type: Auma
• For short time duty S 2-15 Min. (for control S4 25%)
• Enclosure IP 68
• Temperature guard in the motor
• Heating
Voltages:
• 400V 50Hz
• 230V 50Hz
(Other voltages on request)
Accessories:
• Travel switch
• Potentiometer
• Auma Matic
• Valve positioner 0-10V / 4-20mA
• Position-transmitter
For connection refer to terminal connection in the operating instructions of the
actuator !

Seat: EPDM / NBR-black / FPM

DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600

Actuator
SA07.5
Type of actuator SQ05.2 SQ07.2 SQ10.2 SQ12.2 +VZ+SG

Operating time (s) 16 16 16 22 69

Dimensions
H1 (mm) 461 461 467 473 483 491 512 530 546 580 633 653 719 832 869 920 867
h (mm) 134 134 134 134 134 134 134 134 134 134 160 151 151 215 215 215 115
ØC (mm) 160 160 160 160 160 160 160 160 160 160 160 200 200 200 200 200 160
P1 (mm) 238 238 238 238 238 238 238 238 238 238 238 248 248 248 248 248 194
P2 (mm) 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 80 80 105 105 105 537
P3 (mm) 265 265 265 265 265 265 265 265 265 265 265 265 265 265 265 265 139
P4 (mm) 249 249 249 249 249 249 249 249 249 249 249 254 254 254 254 254 374

Weights
ZIVA®-Z (kg) 24,3 24,3 24,6 25,2 25,7 26,4 27,4 29,4 30,9 34,8 44,5 57,4 73,8 104 161 164,8 286,7
ZIVA®-G (kg) 24,8 24,8 25 25,7 26,2 27,8 29,2 31,6 33,5 38,8 50,1 64,6 87 125,4 163 207,7 356

Seat NBR-white on request.

Operating and installation instructions can be downloaded at www.ari-armaturen.com.

Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com! 9

 ARI-ZIVA®-Z / ARI-ZIVA®-G
AIR TORQUE
Butterfly valve with pneumatic rotary actuator
Type: AIR TORQUE
• Function: double acting
single acting, Spring closes on air failure (opens)
• Actuating pressure 6 bar (=0,6 MPa)
• Position indicator
Accessories:
• Limit switch open / close
• Solenoid valve
• Exhaust silencer with throttling function
• Valve positioner
Other actuating pressures on request
Solenoid valve:
for control of double acting actuators
5/2 - way

Solenoid valve:
for control of single acting actuators
3/2 - way

For connection refer to terminal connection in the operating instructions of the

actuator !

Seat: EPDM / NBR-black / FPM

DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600

Actuator
Type of actuator DR30 DR60 DR100 DR150 DR220 DR450 DR600 DR900 DR1200 DR3000

Dimensions
H1 (mm) 222 222 228 234 244 252 290 321 337 383 438 499 565 625 713 782 935
double acting

P1 (mm) 159 159 159 159 159 159 211 248 248 269 315 409 409 438 474 543 728
P2 (mm) 83 83 83 83 83 83 95 106 106 123 141 172 172 187 200 222 329

Weights
ZIVA®-Z (kg) 2,9 2,9 3,2 3,8 4,3 5 7 10,2 11,7 17,2 29,4 44,9 61,3 91,8 153 186,3 300,2
ZIVA®-Z (kg) 3,4 3,4 3,6 4,3 4,9 6,5 8,9 12,4 14,3 21,2 35 52 74,5 113,2 154 211,2 369,5

Actuator
SC SC SC SC SC SC SC SC SC SC
Type of actuator (closes) SC 30- 6 SC 1200- 6 2000-
60- 6 100- 6 150- 6 220- 6 300- 6 450- 6 600- 6 6 2000- 6 3000- 6
--
SO SO SO SO SO SO
Type of actuator (opens) SO 30- 5 SO 100- 5 SO 220- 5 SO 900- 5 1200-
60- 5 150- 5 450- 5 5 2000- 6 2000- 5

Dimensions
single acting

H1 (mm) 222 222 228 234 261 282 315 361 389 443 490 587 653 756 791 867
P1 (mm) 159 159 159 159 211 248 269 315 345 409 438 543 543 621 605 684 --
P2 (mm) 83 83 83 83 95 106 123 141 152 172 187 222 222 262 262 330

Weights
ZIVA®-Z (kg) 3 3 3,3 3,9 5,9 7,8 10,9 16,2 20,5 29,9 45 75,5 91,9 136,2 162 235
--
ZIVA®-Z (kg) 3,5 3,5 3,7 4,2 6,5 9,3 12,7 18,4 23,1 33,9 50,6 82,7 105,1 157,6 163 277,9

Seat NBR-white on request.

Operating and installation instructions can be downloaded at www.ari-armaturen.com.

10 Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!

 ARI-ZIVA®-Z / ARI-ZIVA®-G
bar
Butterfly valve with pneumatic rotary actuator
Type: bar
• Function: double acting
single acting, Spring closes on air failure (opens)
• Actuating pressure 6 bar (=0,6 MPa)
Accessories:
• Limit switch open / close
• Solenoid valve
• Exhaust silencer with throttling function
• Position indicator
• Valve positioner
Other actuating pressures on request
Solenoid valve:
for control of double acting actuators
5/2 - way

Solenoid valve:
for control of single acting actuators
3/2 - way

For connection refer to terminal connection in the operating instructions of the

actuator !

Seat: EPDM / NBR-black / FPM

DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600

Actuator
GTD GTD GTD GTD GTD GTD GTD GTD
Type of actuator GTD 58/90 GTD 98/90
68/90 110/90 115/90 143/90 163/90 185/90 210/90 254/90

Dimensions
double acting

H1 (mm) 221 221 227 233 243 265 286 333 349 406 433 520 586 635 727 780 887
P1 (mm) 127 127 127 127 127 140 140 209 209 222 292 337 337 377 422 462 683
P2 (mm) 72 72 72 72 72 82 82 108 108 120 120 172 172 172 224 224 272

Weights
ZIVA®-Z (kg) 2,2 2,2 2,5 3 3,6 4,9 5,8 9,8 11,3 17 28,1 44,8 61,2 88,4 157 164,6 286,4
ZIVA®-Z (kg) 2,7 2,7 2,9 3,6 4,2 6,3 7,6 12 13,9 21 33,7 52 74,4 109,8 158 207,5 355,7

Actuator
GTE GTE GTE GTE GTE GTE GTE
Type of actuator (closes) GTE 68/90 GTE 210/90 GTE 250/90
78/90 88/90 98/90 110/90 115/90 127/90 143/90 --
GTE GTE GTE GTE GTE
Type of actuator (opens) GTE 68/90 GTE 110/90 GTE 210/90 GTE 250/90
78/90 88/90 115/90 127/90 143/90

Dimensions
single acting

H1 (mm) 235 235 241 247 269 285 338 356 372 426 491 577 643 739 774 827
P1 (mm) 140 140 140 140 161 182 222 222 292 298 337 462 462 603 609 603 --
P2 (mm) 82 82 82 82 94 100 120 120 120 137 172 224 224 272 272 272

Weights
ZIVA®-Z (kg) 2,9 2,9 3,2 3,8 5,2 6,4 8,4 12,6 16,3 22,5 39 70 86,4 142,6 195 203,4
--
ZIVA®-Z (kg) 3,5 3,4 3,6 4,3 5,8 7,8 10,2 14,8 18,8 26,5 44,7 77,2 99,6 164 201 246,3

Seat NBR-white on request.

Operating and installation instructions can be downloaded at www.ari-armaturen.com.

Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com! 11

 ARI-ZIVA®-Z / ARI-ZIVA®-G
Actuator flange connection

Actuator flange connection

Double „D“ 2-flat SW 4-square SW

DN25-200 DN250-600
DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
Connection EN ISO 5211 F 05 F 07 F 10 F 14 F16
Double „D“ 2-flat SW (mm) 11 d11 17 d11 -- -- --
4-square SW (mm) -- -- 22 d11 27 d11 36 d11 46 d11
Ød (mm) 7 9 11 18 22
ØD1 (mm) 65 90 125 175 210
ØD2 (mm) 35 55 70 100 130

ØD3 (mm) 50 70 102 140 165

ØD4 (mm) 14 22 -- -- --
l (mm) 19 23 24 29 39 38 48
t (mm) 3 3 3 4 5

Please indicate when ordering:

- Figure-No. - Stem / disc material Please indicate in your order, if
- Nominal pressure - Actuation arrangement the valves are to be installed in
hazardous areas (ATEX).
- Nominal diameter - Special design / accessories
- Soft seal seat material
Example:
Figure 22.012; Nominal pressure PN16; Nominal diameter DN100; Seat aus EPDM, Washer/Stem of 1.4581/1.4021, with notch lever
Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com! 12
 ARI-ZIVA®-Z / ARI-ZIVA®-G
Capacity chart / Difference between disc outside-diameter and face-to-face

Kvs-value / Zeta-value
DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
Kvs-value (m3/h) 20 24 41 98 190 302 550 930 1525 3000 5000 7300 10260 13140 15200 20750 30430
Zeta-value -- 1,52 2,93 2,42 1,03 0,79 0,72 0,53 0,45 0,35 0,29 0,25 0,24 0,23 0,24 0,28 0,23 0,22

max. permissible flow speed:

-Liquids <4m/s
-Gas and vapour <30m/s

opening angle disc

close open
indication - lever

Difference between disc outside-diameter and face-to-face

DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
B (mm) -- -- 5 5 11 18 25 36 48 71 91 112 132 147 168 188 224
D (mm) -- -- 26 29 49 68 88 115 142 194 243 292 333 383 436 486 580

Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com! 13

 ARI-ZIVA®-Z / ARI-ZIVA®-G
Actuator selection

Actuator selection (Seat: EPDM / NBR-black / FPM)  (Seat NBR-white on request)

DN 25-50 65 80 100 125 150 200 250 300 350 400 450 500 600
Connection-Flange EN ISO 5211 F 05 F 07 F 10 F 14 F16
Double „D“ 2-flat SW (mm) 11 d11 17 d11 -- -- --
4-square SW (mm) -- -- 22 d11 27 d11 36 d11 46 d11

Size I II --

Notch lever
Manual actuation

Size I II --

Lock lever

242- 242- 242- AB

Type 242-10S 242-10M 242-30S 242-30L
20M 40M 40M 1250N
Worm gear

Type OM-1 OM-A OM-2 OM-3 OM-4 --

ARI-OM (230V 50Hz)

Electric rotary actuator

Type SQ4 SQ6 SQ10 SQ15 SQ25 SQ60 SQ120 SQ250

Deufra (230V 50Hz)

SA07.5
+VZ4.3
Type SQ05.2 SQ07.2 SQ10.2 SQ12.2
+SG
125.3
Auma (400V 50Hz)
closes on double acting

Type DR30 DR60 DR100 DR150 DR220 DR450 DR600 DR900 DR1200 DR3000
air failure

SC SC SC SC SC SC SC SC SC
Type SC 30-6 SC 60-6 SC 1200-6
100-6 150-6 220-6 300-6 450-6 600-6 2000-6 2000-6 3000-6
Spring opens Spring
single acting

on request
AIR TORQUE
Pneumatic rotary actuator

SO SO SO SO SO
Type SO 30-5 SO 60-5 SO 100-5 SO 220-5 SO 900-5
150-5 450-5 1200-5 2000-6 2000-5
closes on double acting

GTD GTD GTD GTD GTD GTD

Type GTD58/90 GTD68/90 GTD98/90 GTD143/90
110/90 115/90 163/90 185/90 210/90 254/90

GTE GTE GTE GTE GTE GTE GTE GTE

air failure

GTE GTE
Type 68/90- 78/90- 88/90- 98/90- 110/90- 115/90- 127/90- 143/90-
210/90-10 250/90-8
12 10 10 12 12 12 12 12
Spring opens Spring
single acting

on request

bar

GTE GTE
GTE GTE GTE GTE GTE GTE GTE
Type 127/90- 143/90-
68/90-8 78/90-8 88/90-8 110/90-8 115/90-6 210/90-8 250/90-6
8 8

Technology for the Future.

GERMAN QUALITY VALVES
ARI-Armaturen Albert Richter GmbH & Co. KG, D-33750 Schloß Holte-Stukenbrock,
Tel. +49 52 07 / 994-0, Telefax +49 52 07 / 994-158 or 159 Internet: http://www.ari-armaturen.com E-mail: [email protected]

14 Edition 03/17 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!