General Catalogue Ingles
General Catalogue Ingles
General Catalogue Ingles
EHV & UHV Transformers Distribution Transformers OHSAS 18001: 2007 ISO/IEC 17025:2005
Certified Company Certified Company
Our vast experience & continued expansion has allowed us to gain immense trust and appreciation from customers around the
world. We strive to create products and services that enhance society and protect the environment. This is accomplished through
a single component reducing environmental impact or a complete smart grid solution. Toshiba continues to serve the people and
the planet that we call home.
Toshiba Corporation, Japan has established Toshiba Transmission & Distribution Systems (India) Private Limited (TTDI) in
640,000 Square Meter Area at Hyderabad, Telangana State, India for T&D Business. TTDI will emerge as the global manufacturing
hub of Toshiba Corporation to cater products & solutions across the world.
Infrastructure
◘ Installed Capacity of 28 GVA per annum
Key Milestones
◘ Successfully supplied & commissioned 1 No. of 333 MVA, 1200
kV, 1 Ph, Auto Transformer with In-House development for
1200 kV Test Station at BINA, M/s. PGCIL during 2012-13
Product Range
S.NO DESCRIPTION RATING VOLTAGE CLASS STANDARDS
1 Generator Transformer Up to 1000 MVA Up to 800 kV ANSI, IS, BS, NEMA, IEC
2 Auto Transformer Up to 1500 MVA Up to 1200 kV ANSI, IS, BS, NEMA, IEC
3 Two Winding Transformer Up to 1000 MVA Up to 800 kV ANSI, IS, BS, NEMA, IEC
4 Medium Power Transformer 25 MVA to 60 MVA 60 kV to 245 kV ANSI, IS, BS, NEMA, IEC
5 Traction Transformer Up to 200 MVA Up to 245 kV ANSI, IS, BS, NEMA, IEC
Product Range
Description Core Material Phase Primary Voltage Rating
3
Medium & Small Power (CRGO Silicon Steel)
Transformers
Medium & Small Power Transformers (Oil Filled)
have a robust design and sturdy construction to
competently handle short circuits.
Standard Fittings
◘ Primary Bushings
◘ Secondary Bushings
◘ Buchholz Relay
◘ Thermometer
◘ Lifting Lugs
Applications
• Industries • Power Stations • Receiving Stations & Substations • Railways • Ports
4
Inverter Duty Transformers
Reliable for solar grids
Features & Benefits
◘ L o w Vo l t a g e w i n d i n g h a s f o i l w o u n d
construction improves the short circuit
withstand capability. The axial forces are
minimal.
◘ Low voltage winding insulation design
suitable for high voltage ripples (1.6kV)
and high du/dt of 1kV/µs
◘ E a c h LV w i n d i n g h a s a d e d i c a t e d H V
winding which improves the impedance
and mechanical balance between the
windings
Standard Fittings
◘ 5 Position off Circuit Tap Changer
◘ HV Porcelain Bushings with Cable Box
Insulating Fluid : Mineral Oil as per Specification / Ester Oil ◘ 4 Lifting Lugs
Optional Fittings
◘ HV Cable Box ◘ Elbow Connectors For Plug in ◘ Magnetic Oil Gauge
◘ HV Disconnecting Chamber ◘ LV Disconnecting Chamber ◘ Rapid Pressure Relay
◘ HV Plug in Bushings ◘ SCADA Provision For WTI and OTI ◘ DGPT2 Or DMCR Relay for Sealed
Transformers
5
Three Phase Distribution (Amorphous Metal/CRGO Silicon Steel)
Transformers
Standard Fittings
◘ Primary Bushings
◘ Secondary Bushings
◘ Cable Terminations
◘ Pole Mounting Bracket / Tank Base Channel
◘ Tank Grounding Provision
◘ Oil Level Indicator
◘ Filling Device
◘ Earthing Terminal
◘ Rating and Diagram Plate
◘ Lifting Cum Clamping Lug
◘ Drain Plug
Optional Fittings
◘ HV / LV Cable Box
◘ Rollers (Uni-Directional / Bi-Directional)
◘ Drain Valve
◘ Completely Self Protection (CSP) Feature
◘ Conservator and Silica Gel Breather
◘ Pressure Relief Device
◘ Off Circuit Tap Changer / OLTC
◘ Lightning Arrester / Arcing Horns
Technical Specification
◘ Oil Temperature Indicator
Ratings : CRGO : Upto 4000 kVA
◘ Terminal Connectors
AMT : Upto 2500 kVA ◘ Tap Changer
Applicable Standards : IS, IEC, ANSI, JIS, DIN, BS, EN, etc.
Cooling : ONAN
Frequency : 50 Hz, 60 Hz
6
Under Ground -Three Phase Elliptical Tank Three Phase
Distribution Transformers Distribution Transformers
(Amorphous Metal/ (Amorphous Metal/
CRGO Silicon Steel) CRGO Silicon Steel)
Standard Fittings
◘ Pole Mounting Brackets
◘ Lifting Lugs
◘ Primary Bushings
Technical Specification ◘ Secondary Bushings
Optional Fittings
◘ Lightning Arrester / Arcing Horns ◘ High Voltage Neutral Bushing ◘ Terminal Connectors
◘ Tap Changer for External Operation ◘ Cable Terminations ◘ Completely Self Protection (CSP) Feature
8
Dry Type Cast Resin (CRGO Silicon Steel)
Transformers
TTDI has been producing Dry Type Cast Resin
Transformers for more than 15 years.
Standard Fittings
◘ Lifting Eyes
Optional Fittings
◘ Terminal Connectors ◘ Special Termination Arrangement ◘ Cable Box / Bus Duct ◘ Cooling Fan
◘ Rollers (Uni-Directional / Bi-Directional) ◘ Protection with Temperature Scanner ◘ Off Circuit Tap Changer
9
Pad Mounted Transformers (Amorphous Metal/CRGO Silicon Steel)
Benefits
◘ Robust quality systems ensure
implementation of the best design and
manufacturing practices
Standard Fittings
Technical Specification
◘ Primary Bushings
Ratings : Single Phase
◘ Secondary Bushings with Terminal
CRGO: Upto 1000 kVA Connectors
AMT: Upto 167 kVA
◘ Pressure Relief Device
Three Phase
CRGO: Upto 1000 kVA ◘ Oil Filling Plug
AMT: Upto 1000 kVA ◘ Liquid Level Guage
Applicable Standards : ANSI
◘ Drain Valve with Sampler
Insulating Fluid : Mineral Oil as per specification / Ester Oil
Frequency : 50 Hz, 60 Hz ◘ Hinged Cabinet Doors
Vector Group : As specified ◘ Sealed Tank Oil Preservation System
Primary Voltage : Upto 25 kV
◘ Rating & Diagram Plate
Secondary Voltage : 415, 433 V
(Other Voltages as required)
Winding Material : Copper / Aluminium
Tapping Range : : As per customers requirement
(or) In line with applicable standards
Impedance : As per customer requirement
(or) In line with applicable standards
Optional Fittings
◘ Current Limiting Fuses with Breaker for LV ◘ Bay-O- Net Fuses / Canister-HV
◘ Elbow Connectors - Load Break / Non Load Break Switch
◘ Dial Type Thermometer ◘ Tap Changer ◘ LV Distribution Panel
Applications
• Industrial • Commercial • Institutional and Residential areas
• Indoor installations like Cellars, Malls, Complexes where safety is prime concern
10
Gas Insulated Switchgear (upto 800 kV)
To s h i b a m a n u f a c t u r e s G a s I n s u l a t e d
Switchgears (GIS) up to 800 kV.
Toshiba is a Global Leader in the market for
over 40 years with highest reliability.
World's first supplies include 800kV GIS in 1985,
550kV- 63kA single break GCB in 1993.
◘ Compactness & Indoor / Outdoor Compatibility ◘ Customer Satisfaction is our Top Priority.
◘ Protection Against Extreme Environmental Conditions ◘ Top Quality Guarnteed.
◘ Safe & Reliable Operation with Minimal Maintenance
◘ Higher Seismic Stability & Better Aesthetics
Rated Short Time withstand Current Up to 40 kA – 3 sec Up to 50 kA – 3 sec Up to 63/ 80 kA – 3 sec Up to 50 kA – 3 sec
11
Package Substation (12 kV & 36 kV)
◘ LV Switchgear
◘ Enclosure
◘ Interconnections
Key Features
◘ Compact & Robust Construction
◘ Customized Solution
Standards
Enclosure : IEC 62271-202
Transformer conforms to IEC 60076-1 or 600726-11
MV Switchgear conforms to IEC 62271-200 and IEC 60694
LV Switchgear conforms to IEC 60439-1
Ratings
MV Switchgear : 12/24/36 kV Ring Main Unit
Transformer : HV - 12/24/36kV, LV - 0.44kV , 1250kVA
LV Switchgear : Customized as per the requirement
Applications
Package Substation Units, in Metallic Enclosure, are used in Electricity Cable Distribution Networks, in Urban or
Rural Areas, Public or Industrial Areas, Building Sites, Mining, Irrigation in Agriculture etc.
In the recent years, Package Substation Units are being increasingly used in alternative energy production
installations, such as those based on Solar Energy, Wind Power, Bio-Fuels, Biomass, Geothermal, Tidal Power and
Wave Power.
12
EPC
◘ System Studies
We cater to our customers' requirements for Turnkey Solutions and Project, by delivering Engineered Product Packages,
Project Solutions, and Customised Solution, undertaking these, with our capabilities in Engineering, Products and Project
Management, turnkey from design to commissioning, on Single Point Responsibility basis.
13
EHV & UHV Transformers Plant Infrastructure
14
CRGO & Amorphous Distribution Transformers Plant Infrastructure
15
EHV & MV Switchgear Plant Infrastructure
16
1650 MVA, 765 kV Class Power Transformers
Regional offices
Northern Region:
Office No - 1104, 11th Floor, Surya Kiran Building 19, K. G. Marg
Connaught Place, New Delhi - 110001, India. Tel: +91-11-30161070
Eastern Region:
Unit No. 1702, Ecostation, Plot No. 7, Block BP, Sector-V, Bidhannagar
Salt Lake, Dist.: North 24 Parganas, Kolkata - 700 091, India.
TTDI / CAT / PRD / 05 - 18 / R5
Western Region:
601, 6th Floor, CNB Square, Big Cinema Complex, 127, Andheri-Kurla Road
Chakala, Andheri (East), Mumbai - 400 059, India. Tel: +91-22-61911549
* All the information contained in this document is the property of Toshiba Transmission & Distribution Systems (India) Private Limited.
* Technical Parameters of the products contained in this document are generic in nature. Please contact us for any Latest / Updated / Specific Information.