Hyd ME C392 AMSK

BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE, PILANI
INSTRUCTION DIVISION
FIRST SEMESTER 2011-2012
Course Handout Part II
Date: 09/05/2011
In addition to part -I (General Handout for all courses appended to the time table) this portion gives
further specific details regarding the course.
Course No. : ME C392

Course Title : Advanced Mechanics of Solids and Kinematics
Instructor-in-charge : Y V D RAO
Instructor : B. Madhavi
1. Scope and Objective of the Course:

The first part deal with in-depth analysis of some advanced topics in Mechanics of Solids,
beyond what is covered in the common course Mechanics of Solids ES C221.
The second part deals with kinematics of simple mechanisms and motion generation, which
lays foundation for further study in Dynamics and Vibration ME C442.
2. Course Description:
The course work starts with Generalized Hooke’s law and Three Dimensional Stress Strain
Relations. Then a detailed discussion of energy methods for solving indeterminate problems is
included. Theories of Asymmetrical Bending, Curved Beams and Thick Cylinders are dealt
with in later chapters. A chapter with a brief study on Contact Stress is also included.
In the second part of the course, introduction to Mechanisms and Machines is given first and
then Kinematics of Mechanisms and Machines is explained. Procedure for drawing Velocity
and Acceleration diagrams for Planar Mechanisms is explained which is a Graphical method.
Then analytical methods of analysis of Planar Mechanisms is dealt. Kinematics of Cam and
Synthesis of Cam Profile and study and analysis Gear Trains are taught in the last two chapters.
3. Text books:
T1: "Advanced Mechanics of Materials" - Arthur P., Boresi and R.J. Schinid, John
Wiley, 6th Edition, 2003.
T2: “Theory of Machines and Mechanisms” – John Joseph Uicker, Joseph Edward Shigley, Gordon R.
Pennock, Oxford University Press, 3rd Edition, 2003.
Reference books:
R1: “Advanced Mechanics & Solids” - L.S. Srinath, Tata McGraw- Hill Publishing Co. 2nd Edition,
2003
R2: “Advanced Mechanics of Solids” – Otto T. Bruhns, Springer Verlag, 2003
R3: “Advanced Mechanics of Materials” – R. Davis Cook and Warren C. Young, Prentice Hall 2nd
Edition, 1998.
R4: “Theory of Machines” – S S Rattan, Tata McGraw Hill Publishing Company Limited, second Ed.
R5: "Theory of Machines and Machines” - Amitabh Ghosh and A.K. Malik, Allied East West Press Pvt.
Ltd., 3rd Ed.
R5: “Theory of Machines” – P.L. Balleny, Khanna Publisher 1990
Lect. No. Learning Objectives Topics to be Coursed Chap/Sec.
(Book)
1&2 Review of elementary Mechanics of Introduction & review of CH1 (TB1)
Materials and methods of analysis, failure elementary mechanics of solids
analysis & properties of material
3,4&5 Three dimensional stress strain relations and Theories of stress strain & CH2 (TB1)
tensor representation. Generalized Hooke’s Generalized Hooke’s Law &
law. Hook’s law for Anisotropic elasticity, CH3 (TB1)
Isotropic elasticity and Orthotropic materials
6 to 10 Principle of potential energy, Castigliano’s Energy methods and applications CH5 (TB1)
theorem, Deflections in statically determinate
structures and statically indeterminate
structures, applications to curved beam
treated as straight beams.
11 to 13 Non-symmetrical loading bending and Asymmetrical bending CH7 (TB1)
defection of straight beams. Shear flow in
thin-walled beam cross sections and
deflections in standard channel sections
14 to 18 Location of neutral axis, radial stress, Curved beams CH9 (TB1)
correction of circumferential stress and
deflections of curved beams. Curved beams
of standard sections: I & T. Analysis of
statically indeterminate curved beams (closed
ring).
19 to 23 Stress – Stain – Temperature relation for Thick walled cylinders CH11
thick walled cylinders and composite (TB1)
cylinders. Analysis of open and closed
cylinders
24 & 25 Geometry of contact surface, methods of Contact stress CH17
computing contact stress, deflection of bodies (TB1)
in point contact and line contact with normal
load.
26 & 27 Degree of freedom, types of kinematic joints. Introduction to kinematics CH1 (TB2)
Inversions, Grassoff’s law
28 to 31 Velocity and acceleration diagram of Vector polygon method for CH3&4
Kinematics chains velocity & acceleration (TB2)
32 & 33 Analytical and position vector method of Analytical solutions of velocity CH3&4
determination of velocity and acceleration and acceleration (TB2)
34 to 37 Direction of rotation, speed and torque Gear trains CH10
determination for simple, compound and (TB2)
planetary gear systems.
38 to 41 Different types of cams, motion analysis and Cam and follower systems
motion synthesis of cam. Cam profile CH5 (TB2)
drawing
Evaluation Scheme:
EC No Evaluation Duration Weightage Date & time Nature of
Component (min.) component
1 Test - 1 50 60 Marks TEST 1 OB
2 Test - 2 50 60 Marks TEST 2 CB
3 *Tutorials 50 60 Marks Tutorial hour as announced in
Timetable
4 Comprehensive 180 120 Marks Compre TEST CB
Exam
* Eight surprise Quiz tests of 15 minutes duration each will be conducted during the Tutorials
or regular classes and these will be evaluated for ten marks each. Best six performances out
of eight conducted will be counted for aggregate marks.
Chamber Consultation Hour: To be announced in the class.
Notices: All the notices will be displayed in Mechanical Engineering notice board only.
Make-up policy: No makeup is allowed for Quiz tests.
Daseswara Rao
Instructor-in-charge
ME 392

Hyd ME C392 AMSK

Uploaded by

Copyright:

Available Formats

Hyd ME C392 AMSK

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hyd ME C392 AMSK

Uploaded by

Copyright:

Available Formats

BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE, PILANI

Course No. : ME C392

1. Scope and Objective of the Course:

Chamber Consultation Hour: To be announced in the class.

Make-up policy: No makeup is allowed for Quiz tests.

You might also like