Scribd
Upload
134 views2 pages

Robowars

The document outlines specifications for a robot combat competition including weight categories of 15-60kg, mobility restrictions, control requirements using wireless remote, electrical power only, allowed and restricted weapon types, 3 minute 1v1 matches, and criteria for victory. The arena is specified as 20x20 feet with 1.5 foot walls and prizes will be awarded via bank transfer within 45 days.

Uploaded by

Ashutosh Samal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
134 views2 pages

Robowars

The document outlines specifications for a robot combat competition including weight categories of 15-60kg, mobility restrictions, control requirements using wireless remote, electrical power only, allowed and restricted weapon types, 3 minute 1v1 matches, and criteria for victory. The arena is specified as 20x20 feet with 1.5 foot walls and prizes will be awarded via bank transfer within 45 days.

Uploaded by

Ashutosh Samal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Problem Statement

Weight Category – (15Kgs,60Kgs)

DESIGN SPECIFICATIONS :

Specifications:
1. There will be no restrictions on the dimensions of the bot.
2. The weight of the machine should not exceed 15 Kgs and 60Kgs. All batteries
should be on board. The weight of the remote controller will not be counted.
3. All type of bots is allowed.

Mobility:
Mobility methods that are NOT allowed:
1. Flying (using airfoil, helium balloons, ornithopters, etc.) is not allowed.
2. The robots should not secure itself on the ring surface by using suction cups,
diaphragms, sticky treads, glue or other such devices.

Robot Control Requirements:


1. The robot must be controlled only through a wireless remote, while all power
supply must be on board.
2. The Control must be exhibited over all of its functions and positions. Although
autonomous functions within the bot are acceptable, the controller must be able to
remotely disable or override these functions at any time. Note that any damage due to
this function is the responsibility of the team, and there must compulsorily be a
manual emergency stop (E-stop) function that can be controlled from the radio
controller to manually override this autonomous function in case of emergency.
3. If a team has two bots in a same category a separate driving system and separate
operator should be there.

Battery and Power:


1. The machine must be powered electrically. Use of an IC engine in any form is not
allowed. Onboard batteries must be sealed, immobilized-electrolyte types (such as gel
cells, lithium, NiCad, NiMH, or dry cells).
2. The electric voltage between any 2 points on the machine should not exceed 36V
DC at any point in time. Participants will have to bring their own converters for
standard power supply according to Indian standards.
Weapon Systems:
1. Robots can have any kind of magnetic weapons, cutters, flippers, saws, lifting
devices, spinning hammers etc. (if they qualify the criteria mentioned below) as
weapons.
2. Following weapons cannot be used:
a. Liquid projectiles (Foam, liquefied gases)
b. Any kinds of inflammable liquids
c. Weapons causing invisible damage (Electrical weapons, RF jamming weapons
and others).

Match Duration and Type:


Matches will consist of 3 minutes of active fight time exclusive of any time-outs. Hence,
it is not binding but advisable to keep battery capacity, power usage and
machine defences such that they can sustain a 3- minute fight. Match will be a regular
1 on 1 combat between 2 bots.

Criteria for victory:


a. Aggression
b. Control
c. Damage

ARENA SPECIFICATION:

Arena 20ft*20ft
Play ground 18ft*18ft
Side wall 1.5ft
Poly 6mm(certified).
Poly height 8ft.
Base metal iron plate.
Base plate thickness 3mm.
Arena have 2 gate, gate height 5ft

PRIZES :
1. The prize money will be awarded to winners via NEFT and will be processed
within 45 working days after receiving the prize money from our sponsors.
2. Body of mail:
a. Account Holder’s Name
b. Account Number
c. Bank name and Branch name.
d. IFSC Code

You might also like