Miele Softtronic W 2444 WPS Operating Instructions PDF

Operating instructions
for Washing machine

W 2444 WPS
To avoid the risk of accidents or

damage to the machine it is G
essential to read these instructions
before it is installed or used for the
first time. M.-Nr. 06 068 940
Downloaded from www.Manualslib.com manuals search engine

Caring for our environment
Disposal of the packing Disposal of your old appliance

material or machine
The transport and protective packing Electrical and electronic appliances /
has been selected from materials which machines often contain materials
are environmentally friendly for disposal which, if handled or disposed of
and can normally be recycled. incorrectly, could be potentially
hazardous to human health and to the
Ensure that any plastic wrappings,
environment. They are, however,
bags etc. are disposed of safely and
essential for the correct functioning of
kept out of the reach of babies and
your appliance or machine. Please do
young children. Danger of suffocation!
not therefore dispose of your old
Rather than just throwing these machine or appliance with your
materials away, please ensure they are household waste.
offered for recycling.
Please dispose of it at your local

community waste collection / recycling
centre and ensure that it presents no
danger to children while being stored
for disposal.
It should be unplugged or disconnected
from the mains electricity supply by a
competent person. The plug must be
rendered useless and the cable cut off
directly behind it to prevent misuse.
See the "Warning and Safety" section of
this booklet for further details.
2
Contents
Caring for our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Disposal of your old machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Description of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Special programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Delicates and Silks / programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Water plus system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Time left display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Locking functions (programme locking, system lock) . . . . . . . . . . . . . . . . . . . 10
Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Important control panel features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Programme selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Additional option buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
"Spin" button with indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Washing environmentally and economically. . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Energy and water consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Additional options (Soak, Pre-wash, Intensive) . . . . . . . . . . . . . . . . . . . . . . . . 15
When drying with a tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
How to wash correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Before washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
At the end of a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 26
3
Contents
Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Altering a programme once selected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Skipping a programme stage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
To cancel or select a different programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Water softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Fabric conditioners and liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Automatic dispensing of fabric conditioner or liquid starch to laundry
at the end of a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Adding fabric conditioner separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Adding starch separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Colour run and dye removers/dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Locking functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Electronic programme locking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Electronic system lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

E-Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Extra cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cleaning the detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Cleaning the filter in the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Problem solving guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

The programme does not start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
The wash programme stops and a fault indicator light comes on. . . . . . . . . . . . . 38
A fault indicator light comes on but the wash programme continues as normal. . 39
General problems or an unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . 40
The drum door does not open when you press the Door button. . . . . . . . . . . . . . 42
Opening the drum door in the event of a blocked drain outlet and/
or power failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Blocked drain outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Opening the drum door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Customer contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
4
Contents
Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Installing the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Removing the transit fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Screwing out and adjusting the feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Building under a continuous worktop/in a kitchen run . . . . . . . . . . . . . . . . . . . 52
Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
The Miele Waterproof system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Connection to the drainage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Note for test institutes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Programmable functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Water plus system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Top-up rinse for Cottons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Memory Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Soak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
5
Warning and safety instructions
load) match the mains electricity
To avoid the risk of accidents and supply. If in any doubt, consult a
damage to the machine please read qualified electrician.
these instructions carefully before
The electrical safety of this
using it for the first time. They
machine can only be guaranteed
contain important information on its
when continuity is complete between
safety, use and maintenance.
the machine and an effective earthing
Keep these operating instructions in
system which complies with local and
a safe place and ensure that new
national regulations. It is most important
users are familiar with the content.
that this basic safety requirement is
Pass them on to any future owner of
present and regularly tested and where
the machine.
there is any doubt the household wiring
system should be inspected by a
Correct usage qualified electrician.
Only use the washing machine to The manufacturer cannot be held liable
wash items which are specified by for the consequences of an inadequate
the manufacturer to be machine-wash- earthing system (e.g. electric shock).
able on the wash-care label, and tex- Do not connect the machine to the
tiles composed of hand-washable wool mains electricity supply by an
or wool blend fabrics as well as satin, extension lead. Extension leads do not
lace, silk and other hand-washable guarantee the required safety of the
garments. machine (e.g. danger of overheating).
Any other applications may be danger-
ous. The manufacturer is not liable for The machine is built in accordance
damage resulting from improper use or with current safety requirements.
operation. Unauthorised repairs could result in
unforeseen dangers for the user, for
This machine is not a toy! To avoid which the manufacturer cannot accept
the risk of injury do not allow liability. Repairs should only be
children to play on or near it or to undertaken by a Miele approved
play with the controls. Supervise its technician.
use by the elderly or infirm. Ensure current is not supplied to the
appliance until after maintenance or
repair work has been carried out.
Technical safety
The machine is only completely
Before setting up the machine,
isolated from the electricity supply
check it for any externally visible
when:
damage. Do not install and use a
damaged machine. – it is switched off at the wall socket
and the plug is withdrawn, or
Before connecting the machine,
– it is switched off at the mains, or
ensure that the connection data on
the data plate (voltage and connected – the mains fuse is withdrawn.
6
The Miele "Water protection Do not install your washing
system" protects from water machine in rooms where
damage provided the following temperatures below freezing may
conditions have been met: occur. Frozen hoses may burst under
pressure. The reliability of the electronic
– the machine is correctly plumbed in
control unit may be impaired at
and connected to the electricity
temperatures below freezing point.
supply.
Before using the machine for the
– if a fault has been identified, the
first time, check that the transit
machine must be examined by a
fitting at the rear of the machine has
competent person before further use,
been removed (see section on
and repaired if necessary.
"Installation"). During spinning, a transit
Faulty components must only be fitting which is still in place may result in
replaced by genuine Miele original damage to both the machine and
spare parts. Only when these parts are adjacent furniture or appliances.
fitted can the safety standards of the
Turn off the stopcock if the
machine be guaranteed.
machine is to be left for any length
If the connection cable is faulty it of time (e.g. holiday), especially if there
must only be replaced by a Miele is no floor drain (gully) in the immediate
approved service technician to protect vicinity.
the user from danger.
Flooding danger
In countries where there are areas If hooking the drain hose into a
which may be subject to infestation wash basin, check that the water can
by cockroaches or other vermin, pay drain off quickly enough to prevent the
particular attention to keeping the sink from overflowing.
machine and its surroundings in a Make sure the drain hose is secure, so
clean condition at all times. Any that the force of the water flowing out of
damage which may be caused by the hose does not dislodge it.
cockroaches or other vermin will not be Otherwise this will result in flooding.
covered by the machine guarantee.
Take care to ensure that foreign
objects (e.g. nails, pins, coins,
Use paper clips) do not find their way into
This equipment may only be used the machine with the laundry. These
in mobile installations such as may damage components of the
ships, caravans, aircraft etc. if a risk machine (e.g. suds container, drum),
assessment of the installation has been which in turn can result in damage to
carried out by a suitably qualified the laundry.
engineer.
7
If the correct amount of detergent Safety with children
is dispensed, the machine should
This machine is not a toy! To avoid
not need to be descaled. If, however,
the risk of injury do not allow
you do wish to descale the machine
children to play on or near it or to play
only use proprietary non-corrosive
with the controls. Supervise its use by
descaling agents and strictly observe
the elderly or infirm, and supervise
the instructions on the packaging. If in
children whilst you are operating the
doubt, contact the Miele Customer Ser-
machine.
vice Dept. or your Miele Dealer.
For machines with a ‘porthole’
Textiles which have been pre-
door, remember that the porthole
treated in solvent based cleaning
glass will be hot when washing at very
agents must be thoroughly rinsed in
high temperatures. Do not let children
clean water before being washed in the
touch it.
machine.
Never use solvent based cleaning Accessories
agents in this machine, as this may
result in damage to component parts Accessory parts may only be fitted
and create toxic fumes. Such when expressly approved by Miele.
detergents also pose a fire and If other parts are used, guarantee,
explosion hazard. performance and product liability
claims will be invalidated.
Only use dyes specified by the
manufacturer as being suitable for Disposal of your old machine
use in a domestic washing machine.
Always observe the manufacturer's Before discarding an old machine,
instructions carefully. switch it off at the wall socket and
unplug it. Render the plug useless. Cut
Colour run and dye removers off the cable directly behind the
contain sulphur compounds which appliance to prevent misuse. This
can cause damage such as corrosion. should be done by a competent
Do not use these products in this person.
machine.
The manufacturer cannot be held
Always make sure the drum is liable for damage caused by non-
stationary before reaching in to compliance with these Warning and
remove washing. Reaching into a Safety instructions.
moving drum is extremely dangerous.
8
Description of the machine
Your machine also has the following Delicates and Silks / programmes
special programmes in addition to the
In these programmes, the laundry is
standard Cottons and Minimum iron
washed and spun very gently to reduce
programmes.
creasing and the amount of ironing
required, thus providing "Easy care" for
Special programmes your laundry.
– Silks /
Water plus system
Hand-washable fabrics which crease
easily and do not contain wool can The water level for washing and/or
be washed in the Silks / rinsing is increased. For Cottons and
programme (30°C temperature only). Minimum iron programmes an
additional rinse can also be selected.
– Woollens /
Hand-washable or machine-
washable wool or wool blend fabrics
can be washed in the Woollens /
programme. If the garment care label
does not specify a temperature,
wash using the cold setting.
– Quick wash
This is a Cottons programme for
small loads of very lightly soiled
fabrics.
– Automatic
Suitable for small loads of garments
made from man-made fibres and
cotton garments which can be
washed together. Sort according to
colour.
– Separate rinse
Suitable for rinsing and spinning
articles which have been hand
washed.
9
Time left display Future updates (PC)
After the start of a programme, the The indicator or check light marked PC
duration of the programme selected will is the interface used by Miele service
be shown in the display counting down technicians during servicing work for
in hours and minutes and finally in testing purposes and for updating the
minutes. At some points during the machine's programme data.
wash, the time shown can change. This
is normal.
Locking functions (programme lock-

ing, system lock)
Electronic programme locking
Electronic programme locking prevents
the door from being opened or the
programme cancelled during a wash
programme. The electronic programme
locking is automatically cancelled at the
end of the programme.
Electronic system lock
The system lock prevents anyone from
using the washing machine without
your knowledge. When the system lock
is activated :
– the drum door cannot be opened
with the Door button and
– a programme cannot be started.
10
Control panel
a Display f Programme selector

See the following page for more For selecting the wash programme
information. and temperature for that programme.
The programme selector can be
b Start button
turned clockwise or anti-clockwise
Starts the wash programme
g Programme sequence indicator
c Additional option buttons
lights
Additional options can be added to
Show which section of the wash
the basic programme.
programme has been reached
Use the top button to select either
the Intensive, Pre-wash, or Soak h Check lights
option or a combination of these
i I-On/0-Off button
options.
For switching the machine on or off
Use the lower button to select the
or interrupting a programme
Water plus option.
j Door button
Indicator light on = option selected
Opens the machine door
Indicator light off = option not
selected
d Indicator lights for spin speed,
Rinse hold or Without spin
e Spin button
For selecting the final spin speed,
Rinse hold or Without spin
11
Programme duration
After a programme has started, the
maximum programme duration (wash
time) will appear in the display in hours
and minutes.
In the Cottons, Minimum iron and Auto-
matic programmes, the machine
measures the amount of water
absorbed by the laundry and uses this
to calculate the load during the first 10
minutes. If the machine recognises a
smaller load it will shorten the
programme time.
Programme Max. time reduction

normal intensive
Cottons 37 mins 52 mins
Minimum iron 12 mins 13 mins
Automatic 13 mins 18 mins
Soak
If the Soak additional option has been
selected, the soak time is added to the
programme duration in the display to
give a total running time.
12
Important control panel

features Wash programme rpm
Cottons 1600
Programme selector Minimum iron 900
The programme selector is used to set Delicates 600

the basic wash programme and the Silks 400
temperature for that programme. Woollens 1200
The light ring will go out a few minutes Quick wash 1600
after the end of the programme to save Automatic 900
energy. Separate rinse 1200
Starch 1600
Additional option buttons Drain/spin 1600
Additional options can be added to the
basic programme. You can also omit the final spin
Use the top button to select either the ^ Press the "Spin" button to reach:
Intensive, the Pre-wash or the Soak – Rinse hold
option or a combination of these
options. The laundry is not spun and remains
suspended in the final rinse water.
Use the lower button to select the Water This reduces creasing if the laundry
plus option. is not going to be removed from the
The indicator light will come on to show drum immediately after the end of
that the additional option has been the programme.
selected. If an additional option is To continue the programme select a
chosen, which is incompatible with the spin speed. When the programme is
basic programme, it cannot be finished the Anti-crease/Finish light
selected. will come on. Turn the programme
selector to the Finish position and
"Spin" button with indicator lights press the door button to open the
door and remove the laundry.
Select the spin speed. – Without spin
Press the "Spin" button to select a The laundry is not spun. After the
different spin speed. You cannot select water has been drained away the
a spin speed higher than the maximum machine goes straight into the anti-
allowed for the basic wash programme crease stage. Spinning between the
chosen. rinses is also omitted in this setting.
The indicator lights show the speed
selected.
13
Before using for the first time
Before using the machine for the first

time ensure that it is correctly
installed and connected. See the
relevant section under "Installation".
Also check that the fluff filter is
securely tightened. Otherwise there
is a risk of water leakage during use.
For safety reasons spinning is not

possible until the machine has been
prepared for using for the first time. To
activate the spinning function you must
run a wash programme without laundry
and without detergent.
Using detergent could result in an
excessive build-up of foam.
This also activates the ball valve. The
ball valve prevents detergent escaping
from the suds container into the sump
during a wash programme, thus making
maximum use of the detergent.
^ Open the stopcock.
^ Press the I-On/0-Off button in.
^ Turn the programme selector to
Cottons 40°C.
^ Press Start.
When this programme has finished turn
the programme selector to Finish. Your
washing machine is ready for using for
the first time.
14
Washing environmentally and economically
Energy and water consumption Detergent
– Water consumption and energy – Do not exceed the amount of
usage are determined by the size of detergent recommended by the
the load. manufacturer on the packaging.
– Use the Automatic or the Quick wash – Reduce the amount of detergent with
programme for smaller amounts of smaller loads (approx. 1/3 less than
laundry. the amount recommended can be
used when washing a half load).
– When smaller amounts of laundry are
washed in the Cottons programmes,
Additional options (Soak, Pre-
the automatic load recognition
wash, Intensive)
system will reduce the amount of
water, time and energy used. This Select:
may mean that the programme
A wash programme without any
duration alters during the course of
additional options for light to normal
the wash programme.
soiling where there are no obvious
– Instead of the Cottons 95°C marks.
programme, use the Cottons 60°C
A wash programme together with the
programme together with the
Intensive option for normal to heavily
Intensive additional option. This will
soiled laundry with visible staining.
give an energy saving of between
35% and 45%. The programme – Use the additional option Soak
duration will be longer. This instead of Pre-wash. If Soak is
combination is sufficient for most followed immediately by a main wash
levels of soiling. For stubborn or old the same suds are used.
stains, use the Soak option.
When drying with a tumble dryer
– Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
15
How to wash correctly
Brief instructions See the "Programme chart" in the next

section for information on which
Please note:
programmes to use for different fabric
To help familiarise yourself with how to types.
use your washing machine please read
the sections "Before washing",
"Selecting a programme" and "At the
end of a programme" in detail.
A Sort the laundry into colours and
fabric types
Selecting a programme:
B Switch on the washing machine
C Open the drum door
D Load the drum
E Close the drum door
F Select a programme
G Select a spin speed
H Select any additional option required
I Add detergent
J Press the Start button
At the end of a programme:
K Open the drum door
L Remove the laundry
M Switch off the washing machine
N Turn the programme selector to the
Finish position
O Close the drum door
16
Programme chart
Cottons 30°C to 95°C 9ö876
Fabric Cottons and linen fabrics, e.g. bed linen, table linen,
towelling, jeans, underwear, T-shirts, nappies.
Additional options Soak, Pre-wash, Intensive, Water plus
Notes – Only use the Cottons 95°C programme for heavily soiled
laundry.
– For heavy soiling or where staining is visible, use the
Intensive additional option.
– For laundry with stubborn soiling or soiling which has
been left untreated for a while, select both the Intensive
and Soak options.
– For laundry with large amounts of dirt (e.g. dust, sand)
use the Pre-wash additional option.
– For dark coloured fabrics use a detergent for coloured
fabrics, or liquid detergent.
Detergent Powder detergent, detergent for coloured fabrics, liquid
detergent, tablet detergent and liquid tab detergent.
Max. load 5 kg
Note for test institutes:
For testing in accordance with EN 60456 you must use the Intensive option.
Minimum iron 30°C to 60°C 4321 876
Fabric For garments made of synthetic fibres, mixed fibres and for
easy care cotton shirts and blouses.
Notes – For heavy soiling or where staining is visible, use the

detergent, detergent for delicates, tablet detergent and liquid
tab detergent.
Max. load 2.5 kg
17
Delicates cold to 40°C 21

Fabric For delicate garments made of synthetic fibres, mixed fibres
and easy care cotton shirts and blouses.
Curtains, including net curtains, specified as machine-
washable by the manufacturer.
Additional options Soak, Pre-wash, Intensive
– Laundry remains relatively crease-free for easier ironing.
– Dust in curtains usually makes using a programme with
Pre-wash advisable.
– For curtains made from delicate fabrics, reduce the spin
speed or select Without spin.
Detergent Liquid detergent for delicates.
Max. load 1 kg
Silks 30°C /c
Fabric Hand-washable fabrics with no wool content, e.g. satin, lace
and silk.
Additional option Water plus
Notes – Laundry remains relatively crease-free for easier ironing.
– Place socks, tights, bras etc. in a washing bag.
Detergent Liquid detergent for delicates.
Max. load 1 kg
Woollens cold to 40°C /ac
Fabric Machine-washable or hand-washable wool or wool blend
fabrics. If the care label does not specify a temperature
wash using the cold setting.
Notes – Please note that hand-washable garments will not shrink,
stretch, matt or felt beyond the accepted tolerance of the
item.
– During the final spin the 1300 rpm indicator light will
come on. However, to protect the laundry, the machine
will only spin at 1200 rpm during this spin.
Detergent Liquid detergent for machine washable woollens.
Max. load 2 kg
18
Quick wash 40°C 7

Fabric Very lightly soiled fabrics, which can be washed in the
Cottons programme.
Additional option Water plus
Notes – Use less detergent (as for a half load).
– If fabrics have a high proportion of man-made fibres it is
advisable to programme the machine for "Gentle Action".
See "Programmable functions". Note that this programme
is not suitable for delicate items.
detergent.
Max. load 2.5 kg
Automatic 40°C 72
Fabric Small loads of garments made from man-made fibres and
cotton garments which can be washed together. Sort
according to colour.
detergent.
Max. load 3 kg
Starch
Fabric Table cloths, napkins, overalls, aprons.
Notes – The laundry should be washed but not treated with fabric
conditioner.
Max. load 5 kg
Separate rinse
Fabric Articles which have been washed by hand and only need to
be rinsed and spun in the machine.
Notes During the final spin the 1300 rpm indicator light will come
on. However, to protect the laundry, the machine will only
spin at 1200 rpm during this spin.
Max. load 5 kg
Drain/Spin
Notes – Drain only: Select Without spin. Do not use for Woollens.
Max. load 5 kg
19
Garment care label symbols
/ Hand wash (If no temperature

is specified use the lowest
temperature or cold)
h Do not wash
apf Dry clean
D Do not dry clean
y Suitable for chlorine
bleaching
z Do not use chlorine bleach
Tumble dry
q At normal temperature
r At low temperature
s Do not tumble dry
Ironing
I Hot iron
H Medium hot iron
G Cool iron
J Do not iron
20
Before washing
A Sort the laundry
,Do not use solvent-based
cleaning agents in this machine.
^ Sort the laundry by colour and by

care label symbol. Most garments
have a textile care label in the collar
or side seam.
Dark textiles often contain excess dye
and should be washed separately
several times before being washed
together with other garments. Always
wash whites and coloureds separately.
Delicate textiles should be washed
separately in a delicates programme
(use a washing bag where
^ Empty all pockets. appropriate).
,Foreign objects (e.g. nails, – Curtains:
coins, paper clips, etc.) can cause Remove lead weights and strips or
damage to garments and place in a laundry bag.
components in the machine. – Underwiring and collar stiffeners:
Any loose wiring in bras, shirt collar
^ Badly soiled areas, e.g. collars and
stiffeners, etc. should be removed or
cuffs, and water soluble stains can
sewn in.
be pre-treated with bar soap, liquid
detergent or detergent mixed into a – Knitted garments, trousers and
solution or paste. jeans, T-shirts and sweat shirts:
Turn inside out, if recommended by
With particularly stubborn stains ask
the manufacturer.
your dry cleaner for advice.
– Close any zips, fasten hooks and
eyes etc before washing.
– Fasten duvet covers to prevent
smaller items rolling up inside them.
,Do not wash any items in this

machine which are specified by the
manufacturer as not washable on
the care label. (h symbol)
21
Selecting a programme F Select a programme

B Switch on the washing machine
^ Press in the I-On/0-Off button.
C Open the drum door
^ Press the Door button and open the
drum door.
D Load the drum
^ Unfold the laundry and load loosely
in the drum. To achieve best results it
is advisable to make up mixed loads
consisting of both large and small
items. This improves the washing ^ Turn the programme selector to the
effect and helps distribute the load required programme.
evenly to keep the machine stable
The maximum duration for the
and reduce the noise level during
programme will appear in the display.
spinning.
G Select a spin speed
To save energy and water try to load
the maximum amount for the
programme selected.
However, be careful not to overload the
machine. Overloading reduces the
wash result and causes more creasing.
E Close the drum door with a gentle
swing
Make sure that no garments are caught
between the drum door and seal.
^ Press the "Spin" button repeatedly

until the indicator light for the spin
speed you want comes on.
In some programmes the maximum
spin speed is limited. The machine will
not allow a higher spin speed to be
selected.
22
Additional options Pre-wash
H Select additional option(s) For heavily soiled laundry and items
Additional options can be selected as with dried on stains.
long as they are compatible with the
basic programme being used. Soak
Each press of the top button selects the For heavily soiled and stained items
additional option in the following order: with protein stains (e.g. blood, fats
Intensive or Intensive and Pre-wash or and oils, cocoa).
Intensive and Soak or Pre-wash or Soak
or no option selected. – A length of time of between 30
Use the lower button to select or minutes and 2 hours can be
deselect the Water plus option. programmed in 30 minute
increments for the soak process.
– The machine is set ex-works with a
soak period of 2 hours.
To programme in a different soak period
see "Programmable functions - Soak
period".
Water plus
If you want to increase the water level
for a wash process you can choose one
of four options for the Water plus
button. See "Programmable functions -
^ Press the appropriate additional Water plus system".
option button. Press the top button
The machine is set at the factory so that
repeatedly until the indicator light for
the water level in the main wash and
the additional option you want comes
rinses will be increased if the Water
on.
plus button is pressed.
Intensive
For normal to heavy soiling with

visible staining.
The duration of the main wash is

increased.
23
I Adding detergent
It is important to dispense the correct
amount, because. . .
. . . too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles cling to the laundry.
– Limescale deposits on the heater
elements.
. . . too much detergent results in:
^ Pull out the detergent drawer and
– Excessive foam, which causes a low
place detergent in the compartments
level of agitation and poor wash,
as follows:
rinse and spin results.
i = Pre-wash
– higher water consumption because
(if selected, add 1/4 of the
an extra rinse is automatically
total amount recommended for
activated
the programme). This compart-
– A burden to the environment. ment is also used for starch
formulations when starching
separately.
j = Main wash
including the Soak period if
selected
§ = Fabric conditioner or
liquid starch.
^ Close the detergent drawer.
See section on "Detergent" for further
information on detergent and the
amount to dispense.
J Press the Start button
This starts the programme. The
maximum programme duration will then
show in the display.
24
At the end of a programme

Check that all items have been
When the Anti-crease/Finish indicator
removed from the drum. Items left in
light comes on the laundry can be
the drum could discolour other items
removed from the drum. (This light
in the next wash or become
stays on at the end of the programme
discoloured themselves.
and remains on until the selector is
turned back to the Finish position).
M Switch off the washing machine.
K Open the drum door
^ Press and release the I-On/0-Off
^ Press the Door button. button and turn the programme
selector to Finish. The Anti-crease/
L Remove the laundry.
Finish light will then go out.
,Only remove laundry from the N Close the drum door
machine once the drum has
Otherwise there is the danger of
stopped turning. Reaching into a
objects being placed inadvertently in
moving drum is extremely
the drum. If these remained unnoticed
dangerous and could result in injury.
and were washed in the next load, they
could damage the laundry.
^ Check the folds in the door seal for

any small articles, e.g. buttons which
may be lodged there.
25
Adding or removing laundry The door cannot be opened, if:

after a programme has started – the suds temperature is above 55°C.
Laundry can be added or removed – the water is above a certain level.
after the programme has started when
using the following programmes: – programme locking is switched on.
– Cottons – the programme has reached the

Final spin stage.
– Minimum iron
The Locked check light will come on if
– Quick wash the Door button is pressed when the
– Automatic above conditions are present.
– Starch
^ Press the Door button in and hold it
until the door springs open.
^ Add or remove items.
^ Close the door.
The programme will continue
automatically.
Please note:
Once a programme has started the
machine cannot recognise any
adjustment to the load. For this reason
if laundry is added or removed after the
start of a programme, the machine will
always complete the programme cycle
assuming a full load which can lead to
an increase in the time remaining for
the programme shown in the display.
26
Interrupting a programme Skipping a programme stage

^ Switch the machine off with the ^ Turn the programme selector to
I-On/0-Off button. Finish.
To continue with the same programme: As soon as the programme sequence
indicator light for the programme stage
^ Switch the machine on with the
you want the programme to continue at
I-On/0-Off button.
starts flashing:
Altering a programme once ^ Turn the programme selector back

selected again to the appropriate programme
within 4 seconds.
The machine will accept the following
changes after a programme has Programmes cannot be altered and
started: programme stages cannot be
– at any time after the start, the spin skipped if programme locking has
speed can be changed within the been activated.
limits for the programme.
To cancel or select a different
– up to 6 minutes after the start, the
Water plus additional option can be
programme
selected or de-selected and a ^ Switch the machine off with the
different temperature can be I-On/0-Off button.
selected for the programme in use.
^ Turn the programme selector to
After the start of a programme it is no Finish.
longer possible to select a different
The programme has now been
programme.
cancelled.
If the programme selector is moved, the
^ Switch the machine on with the
indicator light Anti-crease/Finish will
I-On/0-Off button.
start flashing. However, the programme
sequence remains unaffected. The ^ Select a different programme.
indicator light will go out again when
^ Press the Start button.
the programme selector is moved back
to the programme previously chosen.
27
Programme sequence
Main wash Rinses Spinning
Water Wash Water No of Rinse and Final spin
level rhythm level rinses interim
spin
Cottons d a ( 2-31) L2) L
Minimum iron d a e 2-33) L2) L
Delicates e b e 3 – L
Silks ( d ( 2 – L
Woollens ( c ( 2 L2) L
Quick wash d a ( 2 L2) L
Automatic d a e 2 L2) L
Starch – – d 1 – L
Separate rinse – – e 2 – L
d = Low water level a= Normal wash rhythm

( = Medium water level b= Gentle action
e = High water level c= Woollens
d= Silks
Please continue reading for further details about the programme sequences.
28
This washing machine has fully Special features in the programme
electronic controls with automatic load sequences:
recognition. This machine takes in the
Anti-crease:
right amount of water required for the
programme depending on the amount At the end of every programme, with
of laundry and its absorbency rate. This the exception of the Woollens
means that programme cycles and programme, the anti-crease action
durations shown in the display can switches on for a maximum of 30
vary. minutes. The door can be opened and
laundry removed at any time during the
The programme sequences outlined
anti-crease phase.
below are based on the basic
1)
programme with a full load. Additional A third rinse takes place
options which can be selected have not automatically if:
been taken into account.
– there is too much foam in the drum
The programme sequence indicator
– a spin speed of lower than 700 rpm
lights show the stage the programme
has been selected.
has reached.
– Without spin has been selected
2)
Rinse and interim spin:
There is a spin between the rinses.
3)
A third rinse takes place
automatically if:
– Without spin has been selected
Omitting rinse and interim spin:
Select Without spin.
29
Detergent
All modern detergents produced for The right amount to dispense will
automatic washing machines are depend on the following:
suitable, including liquid, compact
– The quantity of laundry.
(concentrated), tablets, liquid tablets
and special application detergents. – The soiling level of the laundry.
Use dispensing aids, e.g. balls, if these Lightly soiled
are supplied with the detergent. Tablets No visible dirt or stains. Possibly
are suitable for full loads but note that it slight body odour.
may be impractical to reduce tablets for Normally soiled
smaller loads. Some tablets do not Visibly dirty and/or just a few slight
dissolve as rapidly as others and may stains.
not be suitable for Quick wash Heavily soiled
programmes. Stains and soiling clearly visible.
– The water hardness level.
Woollens and knitwear containing wool
mixtures and hand-washable garments Check with your local water supplier
should be washed using a detergent if you do not know the water
specifically designed for washing hardness level in your area.
woollens. Water softeners
Silk should be washed using a liquid A water softener can be used to cut
detergent specifically designed for down on the use of detergents in
washing woollens. Do not use extremely hard water areas. Dispense
biological detergents on silk as the according to the amount specified on
enzymes may damage the silk! the packaging. First add detergent and
then the water softener.
Instructions for use and recommended
Use a quantity of detergent as for soft
amounts for a full load are given on the
water.
detergent packaging.
Miele do not recommend connecting
the machine to a household water
Liquid detergent
softener.
Liquid detergent should be dispensed
using a ball provided by the manufac- Washing with several
turer for programmes without a pre- components
wash.
If you wash using several components
For programmes with a pre-wash you (e.g. special application detergents),
will need to purchase a special con- dispense them into compartment j in
tainer from the Miele Spare Parts de- the following order:
partment which sits in the main wash 1. Detergent
compartment j of the detergent dis- 2. Water softener
penser drawer. Add liquid detergent to
this container for the main wash and to 3. Stain remover
compartment i for the pre-wash. This way the agents are distributed
more efficiently.
30
Detergent
Fabric conditioners and liquid If starching frequently, the dispenser

starch compartment and especially the
Fabric conditioners make garments soft siphon tube and conditioner channel
to handle and help prevent static cling will need regular cleaning to remove
when tumble drying. any residual starch. See "Cleaning
the detergent dispenser drawer".
Starch stiffens and gives body to items Do not add starch formulations or
of laundry, e.g. shirts, tablecloths and viscous liquid starch to the §
bed linen. compartment as it will clog it up. See
^ Dispense according to the amount "Adding starch separately".
specified on the packaging.
Adding fabric conditioner separately
Automatic dispensing of fabric ^ Add fabric conditioner to
conditioner or liquid starch to compartment §.
laundry at the end of a programme ^ Turn the programme selector to Starch.
^ Select a spin speed.
Adding starch separately
Use the separate Starch programme
when using starch formulations or
viscous liquid starch.
^ Prepare and measure the starch in
accordance with the manufacturer’s
instructions.
^ Add starch to compartment i.
^ Turn the programme selector to Starch.
^ Select a spin speed.
^ Add the fabric conditioner or liquid Colour run and dye removers/
starch to compartment §. Do not dyes
exceed the maximum level mark.
^ Do not use colour run or dye
The conditioner or liquid starch is removers in this washing machine.
automatically dispensed in the last ^ Dyes suitable for use in domestic
rinse. At the end of the programme a washing machines can be used.
small amount of water remains in the However, please note that the salt
fabric conditioner compartment §. used in the dyeing process can
cause corrosion to stainless steel
components in the machine if you
dye frequently. Always observe the
manufacturer's instructions carefully.
31
Locking functions
Electronic programme locking Deactivating programme locking

early
Programme locking prevents the
machine from being opened or the ^ Press the Start button for at least 4
programme cancelled during a wash seconds until the Locked check light
programme. (lower right on the control panel)
goes out.
To activate programme locking Exception:
^ After the start of a programme, press If the programme selector has been
the Start button for at least 4 seconds moved and the Anti-crease/Finish
until the Locked check light (lower indicator light is flashing in the
right on the control panel) comes on. sequence display.
Programme locking is now activated. ^ First, turn the programme selector
The machine will now not accept any back to the programme chosen
changes and the programme will previously. The Anti-crease/Finish
proceed through to the end. The door is indicator light will go out.
locked when programme locking is ^ Now press the Start button for at least
activated. 4 seconds until the Locked check
Programme locking is deactivated light (lower right on the control panel)
automatically at the end of the goes out
programme.
32
Locking functions
Electronic system lock E Next slowly turn the programme

selector anti-clockwise stage by
The system lock prevents your stage to Delicates cold.
machine being used without your The Locked check light (lower right
knowledge. on the control panel) will flash.
When the system lock has been F Now release the Intensive, Pre-wash
activated: or Soak button.
– The drum door cannot be opened G Turn the programme selector to

with the Door button and Finish.
– A programme cannot be started. H Switch the washing machine off with

the I-On/0-Off button.
To activate the system lock
To de-activate the system lock
First, ensure that:
Repeat steps A to G. The locked
– The drum door is closed check light goes out.
– The programme selector is at Finish.
A Switch on the washing machine with
B Press the Intensive, Pre-wash or
Soak button and keep it pressed in
while carrying out steps C to E.
C Slowly turn the programme selector
clockwise stage by stage to -
Cottons 60°C.
D Now slowly turn the programme
selector anti-clockwise stage by
stage to Finish.
33
Cleaning and care
Extra cleaning
,Disconnect the machine from the Carry out a hot wash (70°C or above)
mains electricity supply and
with powder detergent approx. every 6
withdraw the plug from the socket
weeks to help prevent deposits building
prior to cleaning the machine.
up in the machine. These can occur
when washing is mainly done at low
^ Clean the casing with a mild non-
temperatures, and also lead to
abrasive detergent or soap and
unpleasant smells. If you have no
water. Wipe dry with a soft cloth.
reason to wash occasionally at this high
^ Clean the fascia panel with a damp temperature, then run a Cottons 95°C
cloth and wipe dry with a soft cloth. programme with detergent but no
laundry at regular intervals.
^ The drum can be cleaned using a
suitable proprietary stainless-steel
cleaning agent following the
manufacturer's instructions on the
packaging.
,Do not use solvents, abrasive

cleaners, glass cleaners or all-
purpose cleaning agents. These
might damage plastic surfaces and
other components because of the
chemicals they contain.
The washing machine must not be
hosed down.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part number 98013530, which is
suitable for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals. It
can be washed 300 times.
34
Cleaning and care
Cleaning the detergent dispenser
drawer
Remove detergent residues regularly.
^ Clean the siphon.

1. Remove the siphon from
compartment §. Wash under
running warm water. Clean the
^ Pull out the detergent dispenser siphon tube in the same way.
drawer until a resistance is felt. Press
down the release catch and at the 2. Replace the siphon.
same time pull the drawer right out of Over time, detergent residue can build
the machine. up in the water jets in the top of the
^ Clean the detergent drawer with detergent drawer housing.
warm water. ^ Before replacing the detergent
drawer, use a bottle brush or similar
to clean them out.
35
Cleaning and care
Cleaning the filter in the water ^ First turn off the stopcock.
inlet ^ Unscrew the threaded union
The washing machine has a filter to connecting the free end of the inlet
protect the water inlet valve. hose to the stopcock.
The accessible filter in the union in the

open end of the inlet hose should be
checked every six months, or more
often if there are frequent interruptions
to the external water supply.
^ Remove the rubber seal 1 from the

recess.
^ Using pointed pliers, take hold of the
plastic filter bar 2 and remove.
^ Clean the plastic filter.
^ Put the filter and seal back in the
reverse order and reconnect the
hose.
Turn on the stopcock and check the
connection is watertight. If water drips
out, tighten the connection.
Never forget to put the filter back in

place after cleaning.
36
Problem solving guide
With the help of the following notes minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,Repair work to electrical appliances should only be carried out by a

suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start.

Problem Possible cause Remedy
The Anti-crease/Finish There is no power. Check that
indicator light is not on,
– the mains plug is
or the Start indicator
plugged in and switched
light is not flashing.
on.
– the fuse or circuit breaker
has not tripped.
– the drum door is properly
shut.
The Locked check light The system lock has Deactivate the system lock.
is flashing. been activated.
The programme does The washing machine Prepare the machine as
not start when Drain/ has not been prepared described in "Before using
Spin has been selected. for using for the first for the first time".
time.
37
The wash programme stops and a fault indicator light comes

on.
Problem Possible cause Remedy A
The Check drain light The water outlet is Clean the fluff filter and the
flashes. "– – –" appears blocked. drain pump as described in
in the display. "Problem solving guide -
Opening the drum door in the
event of a blocked drain outlet
and/or power failure".
The drain hose has The maximum drain height is
been fixed too high. 1 m.
The Check inlet light The water inlet is Open the stopcock.
flashes. "– – –" appears blocked.
in the display. The filter in the water Clean the filter.
inlet hose is dirty.
The Check inlet and The water protection Call the Service Department.
Check drain lights are system has reacted.
flashing. "– – –" appears
in the display.
The Soak/Pre-wash or There is a fault. Start the programme again.
Rinses indicator light is If the fault indicator occurs
flashing. "– – –" appears again, contact the Service
in the display. Department.
A To switch off the fault indicator: switch the washing machine off with the
I-On/0-Off button and turn the programme selector to Finish.
38
A fault indicator light comes on but the wash programme

continues as normal.
Problem Possible cause Remedy A
The Check drain light The drain outlet is Clean the drain filter and the drain
flashes. restricted. pump as described in "Problem
solving guide - Opening the drum
door in the event of a blocked
drain outlet and/or power failure".
The Check inlet light The water inlet is Check whether
flashes. restricted. – the stopcock is opened wide
enough.
– the inlet hose is kinked.
The filter in the Clean the filter.
water inlet hose is
dirty.
The Excess detergent Excessive foam Use less detergent next time and
check light comes on. has built up follow the manufacturer’s
during washing. instructions on dosage given on
the packaging.
The Main wash There is a fault. Start the programme again.
indicator light is If the fault indicator occurs again,
flashing. contact the Service Department.
The Anti-crease/Finish The position of the programme selector was altered
indicator light is after the start of the programme. Turn the programme
flashing. selector back to the programme previously chosen.
A To switch off the fault indicator: switch the washing machine off with the
I-On/0-Off button and turn the programme selector to Finish.
39
General problems or an unsatisfactory wash result

The machine shakes The four feet are not Level the machine. See
during the spin cycle. resting evenly on the installation.
floor.
The laundry has not The spin speed Select a higher spin speed
been spun selected was too low. next time.
satisfactorily.
The pump makes These do not indicate a fault. They occur at the end of
strange noises. a pump sequence as a normal part of the operation.
The programme The machine has switched off the light ring to save
selector light ring is energy. To switch the light ring back on again: press
not lit up. one of the additional option buttons or turn the
programme selector.
Large residues of The water supply – Clean the filter in the water
detergent remain in pressure is too low. inlet system.
the dispenser drawer. – It may be useful to press the
Water plus button.
Washing powder used Pour washing powder into the
with water softener dispenser before adding any
tends to become water softener.
sticky.
Fabric conditioner is The siphon is either Clean the siphon, see
not completely incorrectly positioned "Cleaning and care - Cleaning
dispensed or too or clogged. the detergent drawer".
much water remains
in the § compartment.
When laundry is dry it Too vigorous wash Programme in gentle action
feels hard to the action. and more water.
touch. Not enough detergent Increase detergent dose to
used. prevent limescale build up in
laundry.
No fabric conditioner Use fabric conditioner in last
used. rinse.
40

Liquid detergent Liquid detergents do – Use a general purpose washing
does not give the not contain bleaching machine powder containing a
required result. agents. They do not bleaching agent.
remove fruit, coffee – Pour stain removers into compart-
and tea stains. ment j of the dispenser drawer
and liquid detergent into a
dispenser ball.
– Never put stain removers and
liquid detergent together in the
dispenser drawer.
Grey, greasy Insufficient amounts of – Add more detergent.
particles cling to detergent were used – Before washing the next load run a
washed laundry. to break down the Cottons 95°C programme with
particles of grease in powder detergent but without a
heavily soiled laundry. load.
A stale smell is in Low temperature Before washing the next load run a
the drum and on washing. Cottons 95°C programme with
laundry. powder detergent but without a load.
There are white The detergent – Try and brush off the residues with
residues which contained compounds a soft brush once the laundry is
look like powder (zeolites) to aid water dry.
detergent on softening which are not – Use a liquid detergent to wash dark
dark coloured soluble in water. These coloured textiles. Liquid detergents
laundry. have ended up on the usually contain no zeolites.
laundry.
Machine is Machine connected to Connect machine to mains water and
constantly over- a water softener. dose detergent for hard water.
foaming/excess Too much detergent Reduce detergent.
detergent light is was used.
on.
Too little detergent Increase detergent slightly to bring
was used. back foam suppressant ingredients.
Clothes are Programme was Reduce quantity of clothes in drum.
coming out overloaded.
creased. The wrong – Check care labels with section
programme was used. "How to wash correctly".
– Use easy iron conditioners.
41
The drum door does not open when you press the Door button.
Possible cause Remedy
The machine is not Put the plug in the socket and switch on.
connected to the
electricity supply.
The washing machine is Switch the machine on with the I-On/0-Off button.
not switched on.
The electronic This is automatically deactivated at the end of a
programme lock has been programme. To deactivate it early see "Locking
activated. functions".
The electronic system To deactivate it see "Locking functions".
lock has been activated.
Power cut. Open the drum door as described in the section
"Opening the drum door in the event of a blocked
drain outlet and/or power failure".
The door was not Press hard against the lock side of the drum door
correctly engaged. and then press the Door button.
There is still water in the Clean the fluff (drain) filter and the drain pump.
drum and the machine is
unable to drain.
For safety reasons the drum door cannot be opened if the suds temperature is
higher than 55°C.
42
Opening the drum door in the Blocked drain outlet

event of a blocked drain outlet If the drain outlet is blocked, up to
and/or power failure 25 litres of water will be retained in the
^ Switch the washing machine off. machine.
There is a lever behind the detergent ,Caution: if laundry has been

drawer fascia panel. washed at a high temperature, water
draining out of the machine will still
be hot. Danger of scalding!
Procedure for draining the machine

^ Place a suitable container under the
access flap.
When draining water from the

machine, do not unscrew the drain
filter completely or take it right out.
^ Remove the lever.
^ Unscrew the drain filter lid until water

runs out.
To interrupt the flow of water:
^ Use it to open the access flap. ^ Tighten the drain filter back up again.
43
Once the flow of water ceases:
,Make sure the drain filter is
securely tightened. Otherwise there
is a risk of water leakage during use.
Opening the drum door
,Always make sure that the drum

is stationary before reaching into the
machine to remove laundry.
Reaching into a moving drum is
extremely dangerous.
^ Remove the drain filter completely.

^ Clean it thoroughly.
^ Pull the emergency release

downwards (see illustration). The
drum door will open.
^ Remove any foreign objects (e.g.

buttons, coins, etc.) and fluff from the
filter housing. Turn the impeller by
hand to check that it rotates freely.
Any foreign object causing an
obstruction should be removed.
^ Put the drain filter back in place and
secure.
44
Customer contact Optional accessories

In the event of any faults which you Optional accessories for this washing
cannot remedy yourself please contact machine are available from your Miele
Dealer or from the Miele Spare Parts
– Your Miele dealer or
Department.
– Your nearest Miele Service
Department (see back cover for the Please note that telephone calls may
address). be monitored and recorded to
improve our service.
When contacting your Dealer or the
Service Department, please quote the
model and serial number of your
appliance, both of which are shown on
the data plate visible at the top inside of
the door above the porthole glass when
the door is open.
45
Installation and connection
Front view
a Inlet hose with "Waterproof" system h Detergent dispenser drawer

b Electricity supply cable i Drum door
c - f Flexible drain hose (with j Access to drain filter, drain pump
detachable swivel elbow) and emergency release
g Facia panel with controls k Handle recesses for moving the
machine
l Four height adjustable feet
46
Rear view
a Protruding edge for holding when e Transit bar covers

moving the machine
f Restraining clip for:
b Electricity supply cable
– Inlet hose
c Inlet hose with "Waterproof" system
– Drain hose
d Drainage hose
– Electricity supply cable
– Transit bars when removed
47
Installation surface Installing the washing machine

A concrete floor is the most suitable To manoeuvre the machine out of its
installation surface for a washing packing case to its installation site hold
machine, being far less prone to it by the edge of the lid where it
vibration during the spin cycle than protrudes to the rear of the washing
wooden floorboards or a carpeted machine as well as by the handle
surface. recesses at the front.
Please note the following points: Please note:
^ The machine must be level and ^ Do not lift the machine by the drum
securely positioned. door.
^ To avoid vibrations during spinning,
the machine should not be installed
,Ensure that the machine feet and
the floor are dry to prevent the
on soft floor coverings.
machine from slipping during the
If installing on a wooden joist floor: spin cycle.
^ We recommend a plywood base
(at least 59x52x3 cm). The base Removing the transit fittings
should span several joists and be
bolted to the joists and not only to the
floorboards. Check for the presence
of pipes and cables.
If possible, install the machine in a
corner, as this is usually the most stable
part of the floor.
,If the machine is installed on a

raised plinth, it has to be secured
against slippage during spinning
using retaining clips (available from
the Miele Spare Parts Dept).
^ To remove the left and right covers

1. Use a screwdriver to prise out the
cover as illustrated.
2. Pull the cover forwards to remove.
48
^ Using the spanner supplied turn the ^ Turn the right-hand transit bar 90°,
left-hand transit bar 90°, then then
^ withdraw the transit bar. ^ withdraw the transit bar.
49
,The washing machine must not

be moved without the transit bars in
place.
Store the transit bars as shown or
keep them in a safe place for future
use. They must be re-fitted if the
machine is to be moved again
(e.g.when moving house).
Re-fitting the transit bars

Re-fitting is carried out by reversing the
procedure.
^ Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
^ Secure the transit bars to the back of

the washing machine. Make sure that
holes b are fitted over retainers a.
50
Levelling the machine

The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
^ Using the spanner supplied turn

counter nut 2 in a clockwise
direction. Then turn counter nut 2
together with foot 1 to unscrew.
^ Use a spirit level to check the
Incorrect installation may increase
machine is standing level.
electricity and water consumption and
may cause the machine to move about. ^ Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
Screwing out and adjusting the feet using the spanner supplied until it
sits firmly up against the housing.
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
,All four counternuts must be
firmly up against the housing. Please
delivered.
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
51
Washer and Dryer stack
The fitting of building under kits and
A Miele tumble dryer can be stacked
stacking kits must only be
with the washing machine. A "WTV"
undertaken by qualified and
stacking kit* is necessary and can be
competent persons, in accordance
purchased from the Miele Spare Parts
with the instructions supplied with
Department.
the kit.
Please note
Building under a continuous
worktop/in a kitchen run
– A special building under conversion
kit* is required.
The machine lid must be replaced by
a cover plate. To ensure electrical
safety the cover plate must be fitted.
N.B.
If you wish to push your machine under
a worktop and there is space to do this
without removing the lid, the
conversion kit is not necessary.
Otherwise the conversion kit is
essential.
– For installation under a work surface
900/910 mm from the floor, a raising
kit* is required. a Safety distance to wall:
– Connections for electricity, water and at least 2 cm
drainage should be installed in such b Height:
a way that they remain accessible Stacking kit with pull-out shelf:
when the machine is in place. approx. 169 cm
Fitting instructions are supplied with the Stacking kit without pull-out shelf:
conversion kit. approx. 170 cm
All parts marked* are available from the Replacing the lid
Miele Spare Parts or Sales Department.
If the lid has been removed in order to
fit a stacking kit or cover plate, ensure
that, if the lid is replaced, it fits securely
into the rear holders. Otherwise, it is not
properly secure for transport.
52
The Miele Waterproof system 2) Electronic unit and washing

machine housing
The Miele Waterproof system protects
the washing machine from water – Sump
damage.
Any leaking water is collected in a
The system consists of three main sump in the base of the machine. A
components: float switches off the safety valves,
preventing any more water from
1) the inlet hose
flowing into the machine and water in
2) the electronic unit and the washing the suds container is pumped away.
machine housing
– Overflow protection
3) the drain hose
This prevents the washing machine
taking in too much water. If the water
1) Inlet hose
level exceeds a certain level, the
– The inlet hose is fitted with an drain pump switches in and pumps
additional electrical safety valve the excess water away.
which works like an automatic
stopcock and is housed in the inlet 3) Drain hose
hose connection box.
The drain hose is protected by a
– It is pressure tested to between ventilation system which prevents the
7,000 and 10,000 kPa. washing machine from being
emptied completely.
– The inlet hose has a protective
sleeve.
Any leaking water from the inlet hose
is fed into the sump through this
protective sleeve. A float switches off
the safety valve, preventing any more
water from flowing into the machine
and water in the suds container is
pumped away.
53
Connection to the water supply
The plastic casing of the safety valve contains electrical components. The
Waterproof system must only be connected to its own stopcock. It must not be
connected to mixer taps or similar and must not be fitted in areas where there is
the risk of water or other liquids reaching it.
The protective sleeve of the hose

must not be damaged or kinked.
Do not get wet.
54
The machine should be connected to a Maintenance and care
mains water supply in accordance with
If you intend to unscrew the Miele
local and national safety regulations.
Waterproof system hose from the
The German authorities do not require it
stopcock it is essential to disconnect
to have a non-return valve as the
the machine from the electricity supply
washing machine has been designed
first.
to comply with DIN regulations.
Only use a Miele Waterproof system
The machine is designed to operate
hose should you need a replacement.
with a flow pressure of between 100
and 1,000 kPa. If it is higher than
In order to protect the water inlet
1,000 kPa it is essential to fit a reducer
valve, the dirt filter in the water inlet
valve.
valve connection must not be
Connection to the mains water supply removed.
should incorporate a mains stopcock
with 3/4" thread. The stopcock should Extension hose
be fitted by a qualified plumber.
A 1.5 metre long (metal) extension hose
,The connection point is subject is available from your Miele dealer or
the Miele Spare Parts Department as an
to mains water pressure. Turn on the
optional extra.
stopcock slowly and check for leaks.
Correct the position of the washer This hose is tested to withstand
and union if appropriate. pressures of up to 14,000 kPa and can
be used as a flexible extension to the
water supply.
The washing machine is not suitable
N.B. Using this hose renders the
for connection to a hot water supply
Waterproof system safety valve on the
and connection to a household
inlet hose ineffective.
water softener is not recommended.
55
Connection to the drainage Drain hose connection:

system 1. Direct into a sink or basin:
The machine drains via a drain pump Please note the following
with a delivery head of 1 metre*.
– Hook the hose over the edge and
The drain hose must not be kinked as secure.
this restricts drainage. The swivel elbow
at the end of the hose can be turned in – Make sure that the water can drain
either direction, or can be detached if away freely without hindrance.
required, with a sharp twist and pull. Otherwise there is a risk of water
overflowing or of some of the drained
If required, the drain hose can be water being sucked back into the
extended to a length of 5 m. The machine.
necessary parts can be purchased
from the Miele Spare Parts Department 2. Connected securely to a plastic drain
or your Miele dealer. pipe with a rubber nipple. There is no
need to use a non-return valve.
* For a delivery head of more than 1 m
(up to a maximum of 1.8 m) a second 3. Connected securely to a standpipe.
duo-drain pump is available with the 4. Connected securely to a floor gully.
corresponding kit from the Miele Spare
Parts Department or your Miele Dealer.
56
Electrical connection U.K. Non-rewireable plugs BS 1363

All electrical work should be carried out The fuse cover must be refitted when
by a suitably qualified and competent changing the fuse, and if the fuse cover
person, in strict accordance with is lost, the plug must not be used until a
national and local safety regulations. suitable replacement is obtained. The
colour of the correct replacement cover
Ensure power is not supplied to the
is that of the coloured insert in the base
appliance until after installation work
of the plug, or the colour that is
has been carried out.
embossed in words on the base of the
The appliance is supplied with a mains plug (as applicable to the design of
cable with moulded plug ready for plug fitted).
connection to a 230-240V mains
Replacement fuses should be ASTA
supply. The voltage and connected
approved to BS 1362 and have the
load are given on the data plate.
correct rating. Replacement fuses and
Please ensure these match the
fuse covers may be purchased from
household mains supply. The fuse
your local electrical supplier.
rating is quoted on the plug.
Connection should be made via a
suitable switched socket which is easily
accessible after installation. WARNING: THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA (in accordance
with DIN VDE 0664, VDE 0100 Section
739).
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
57
Consumption data
Load Consumption data

Energy Water Duration
in kWh in litres Normal Intensive
Cottons
95°C 5.0 kg 1.70 45 1 h 42 min 1 h 57 min
60°C1) 5.0 kg 0.85 45 – 1 h 56 min1)
60°C 5.0 kg 0.85 45 1 h 26 min 1 h 56 min
40°C1) 5.0 kg 0.50 45 – 1 h 56 min1)
40°C 5.0 kg 0.50 45 1 h 26 min 1 h 56 min
Minimum iron
40°C1) 2.5 kg 0.45 49 – 1 h 16 min1)
40°C 2.5 kg 0.45 49 1 h 01 min 1 h 16 min
Delicates
30°C 1.0 kg 0.35 65 49 min 59 min
Silks /
30°C 1.0 kg 0.24 39 37 min –
Woollens /
30°C 2.0 kg 0.23 37 40 min –
Quick wash
40°C 2.5 kg 0.35 35 31 min –
Automatic
40°C 3.0 kg 0.30 - 0.60 30 - 50 54 min 1 h 09 min
1)
EN 60456 test programme

Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any additional options
selected.
58
Technical data
Height 85.0 cm
Width 59.5 cm
Depth 58.0 cm
Depth with door open 97.5 cm
Weight 94 kg
Maximum floor load 1600 Newton (approx. 160 kg)
Capacity 5 kg dry laundry
Voltage see data plate
Rated load see data plate
Fuse rating see data plate
Consumption data see "Consumption data"
Water flow pressure minimum 100 kPa (1 bar)
Water flow pressure maximum 1000 kPa (10 bar)
Inlet hose length 1.60 m
Drain hose length 1.50 m
Connection cable length 1.60 m
Drain pump head max. 1.00 m
Drain pump length max. 5.00 m
Test certificates awarded Radio / TV suppression, VDE
59
60
Programmable functions
for changing standard settings

The programmable functions can be The settings are as follows:
used to tailor washing programmes to
Setting 1:
suit your individual requirements.
an increase in the rinse water level for
The programmable functions are the programmes listed.
activated with the help of the Start
Setting 2:
button and the programme selector.
an increase in the water level in the
main wash and rinses for the
Water plus system programmes listed (the washing
machine is delivered with setting 2
Selecting the Water plus additional
programmed as standard).
option increases the water intake in
the programmes listed below. Setting 3:
an extra rinse cycle in the Cottons and
The water intake is increased in the Minimum iron programmes.
wash and rinse stages and in the
Setting 4:
Cottons and Minimum iron programmes
an increase in the water level in the
an extra rinse cycle is introduced.
main wash and rinses for the
There are four different settings which programmes listed and also an extra
can be programmed to alter the water rinse cycle in the Cottons and Minimum
intake for the following programmes: iron programmes. This setting should
be programmed in if laundry is too hard
– Cottons
after drying and if someone in the
– Minimum iron household suffers from a detergent
allergy.
– Quick wash
– Automatic
– Silks
The programmed setting is then
activated by pressing the Water plus
additional option button.
62
Follow steps A to G to programme E Turn the programme selector to the
and store a setting in memory. Cottons 75°C position:
Before you begin, first ensure that: A P will flash in the display alternating
with the number 1, 2, 3 or 4.
– The washing machine is switched off.
F Each subsequent press on the Start
– The machine is properly closed.
button selects a different setting.
The number alternating with the P in
A Press the Start button and keep it the display refers to the settings as
pressed in whilst carrying out steps follows:
B to C.
1 = Setting 1 is selected
B Switch the machine on with the (increased water level in the
I-On/0-Off button. rinses)
C Wait until the Start indicator light 2 = Setting 2 is selected
comes on . . . (increased water level in the main
wash and in the rinses)
D . . . and then release the Start
button. 3 = Setting 3 is selected
(extra rinse in the Cottons and
Minimum iron programmes)
4 = Setting 4 is selected
(increase in the water level in the
main wash and rinses and also an
extra rinse in the Cottons and
Minimum iron programmes).
G Switch the washing machine off with
The Water plus button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
63
Gentle action A Press the Start button and keep it

pressed in whilst carrying out steps
Activating gentle action reduces the B to C.
drum action and is suitable for
washing slightly soiled items more B Switch the machine on with the
gently. It should be activated for I-On/0-Off button.
garments with a single bar under the C Wait until the Start indicator light
care label and for articles which feel comes on . . .
too hard after they have been dried.
Gentle action can be used with the button.
Cottons, Quick wash, Starch and Auto- E Turn the programme selector to the
matic programmes. Cottons 60°C position:
If "Gentle action" is programmed into A P will flash in the display alternating
the machine, every wash cycle in these with the number 0 or 1.
programmes will be carried out with
gentle action rhythm. 0 = Gentle action is deactivated.
The washing machine is delivered with 1 = Gentle action is activated

"Gentle action" de-activated. F Press the Start button to change from
one to the other. The display will
Follow steps A to G to programme change accordingly from 0 to 1 or
and store in memory. from 1 to 0.
Before you begin, first ensure that: G Switch the washing machine off with
– The washing machine is switched off. the I-On/0-Off button.
– The machine is properly closed. The setting you have selected is now
stored in memory and will remain so
– The programme selector is at Finish. until you alter it.
64
Top-up rinse for Cottons A Press the Start button and keep it
When this is activated, additional B to C.
water flows into the drum at the end
of the main wash to cool the suds B Switch the machine on with the
down. Hot suds can damage plastic I-On/0-Off button.
drainage pipes. C Wait until the Start indicator light
comes on . . .
Top-up rinse takes place when
temperatures of 95°C and 75°C are D . . . and then release the Start
selected. button.
Top-up rinse should be activated: E Turn the programme selector to the

Cottons 40°C position:
– to prevent the danger of scalding if
the drain hose is hooked over the A P will flash in the display alternating
edge of a sink or basin. with the number 0 or 1.
– where the drainage pipes do not 0 = Top-up rinse is deactivated

comply with DIN 1986. 1 = Top-up rinse is activated
The washing machine is delivered with F Press the Start button to change from
the Top-up rinse for Cottons de- one to the other. The display will
activated. change accordingly from 0 to 1 or
from 1 to 0.
Follow steps A to G to programme
and store in memory. G Switch the washing machine off with
Before you begin, first ensure that:
The setting you have selected is now
– The washing machine is switched off. stored in memory and will remain so
– The machine is properly closed. until you alter it.
65
Memory Function A Press the Start button and keep it

If an additional option(s) is selected B to C.
for a programme, and / or the spin
speed is altered, the machine stores B Switch the machine on with the
these changes in memory at the start I-On/0-Off button.
of a programme. C Wait until the Start indicator light
comes on . . .
When that particular programme is
chosen again, the display will show the D . . . and then release the Start
additional option(s) and / or spin speed button.
which have been stored for that E Turn the programme selector to the
programme in the memory. Cottons 30°C position:
The washing machine is delivered with A P will flash in the display alternating
the memory function de-activated. with the number 0 or 1.
Follow steps A to G to programme 0 = Memory function is deactivated

and store in memory. 1 = Memory function is activated
Before you begin, first ensure that: F Press the Start button to change from
– The washing machine is switched off. one to the other. The display will
change accordingly from 0 to 1 or
– The machine is properly closed. from 1 to 0.
– The programme selector is at Finish. G Switch the washing machine off with
until you alter it.
66
Soak A Press the Start button and keep it

A length of time of between 30 minutes
B to C.
and 2 hours can be programmed in 30
minute increments for the soak B Switch the machine on with the
process. I-On/0-Off button.
If the soak option is pressed the C Wait until the Start indicator light
selected soak time will be carried out comes on . . .
for the period selected before the wash
programme is run.
button.
The machine is set as standard to a two
E Turn the programme selector to the
hour soak time.
Minimum iron 60°C position:
Follow steps A to G to programme A P will flash in the display alternating
and store in memory. with the number 1, 2, 3 or 4.
Before you begin, first ensure that: F Each subsequent press on the Start
button selects a different setting.
– The washing machine is switched off.
The number alternating with the P in
– The machine is properly closed.
the display refers to the settings as
– The programme selector is at Finish. follows:
1 = the soak time is 2 hours
(default setting)
2 = the soak time is 1 hour 30 minutes
3 = the soak time is 1 hour
4 = the soak time is 30 minutes
G Switch the washing machine off with
until you alter it.
67
Alteration rights reserved/5104/W 2444 M.-Nr. 06 068 940 / 02
en - GB

Miele Softtronic W 2444 WPS Operating Instructions PDF

Uploaded by

Copyright:

Available Formats

Miele Softtronic W 2444 WPS Operating Instructions PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Miele Softtronic W 2444 WPS Operating Instructions PDF

Uploaded by

Copyright:

Available Formats

Operating instructions

for Washing machine

To avoid the risk of accidents or

Downloaded from www.Manualslib.com manuals search engine

Disposal of the packing Disposal of your old appliance

Please dispose of it at your local

Caring for our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Description of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Washing environmentally and economically. . . . . . . . . . . . . . . . . . . . . . . . . . . 15

How to wash correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Problem solving guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Locking functions (programme lock-

a Display f Programme selector

Programme Max. time reduction

Important control panel

The programme selector is used to set Delicates 600

Before using the machine for the first

For safety reasons spinning is not

Brief instructions See the "Programme chart" in the next

Detergent Powder detergent, detergent for coloured fabrics, liquid

Delicates cold to 40°C 21

Quick wash 40°C 7

/ Hand wash (If no temperature

^ Sort the laundry by colour and by

,Do not wash any items in this

Selecting a programme F Select a programme

^ Press the "Spin" button repeatedly

For normal to heavy soiling with

The duration of the main wash is

At the end of a programme

^ Check the folds in the door seal for

Adding or removing laundry The door cannot be opened, if:

– Cottons – the programme has reached the

Interrupting a programme Skipping a programme stage

Altering a programme once ^ Turn the programme selector back

d = Low water level a= Normal wash rhythm

Fabric conditioners and liquid If starching frequently, the dispenser

Electronic programme locking Deactivating programme locking

Electronic system lock E Next slowly turn the programme

– The drum door cannot be opened G Turn the programme selector to

– A programme cannot be started. H Switch the washing machine off with

,Do not use solvents, abrasive

^ Clean the siphon.

The accessible filter in the union in the

^ Remove the rubber seal 1 from the

Never forget to put the filter back in

,Repair work to electrical appliances should only be carried out by a

The programme does not start.

The wash programme stops and a fault indicator light comes

A fault indicator light comes on but the wash programme

General problems or an unsatisfactory wash result

Problem Possible cause Remedy

Opening the drum door in the Blocked drain outlet

There is a lever behind the detergent ,Caution: if laundry has been

Procedure for draining the machine