Oracle VM Release Notes For 3.4.6

Oracle® VM
Release Notes for 3.4.6
E99523-03
June 2019
Oracle Legal Notices
Copyright © 2011, 2019 Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected
by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce,
translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse
engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them
to us in writing.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then
the following notice is applicable:
U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware,
and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition
Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs,
including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license
terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for
use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware
in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its
safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous
applications.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are
trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or
registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.
This software or hardware and documentation may provide access to or information about content, products, and services from third parties.
Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content,
products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not
be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set
forth in an applicable agreement between you and Oracle.
Table of Contents
Preface .............................................................................................................................................. ix
1 Introduction ..................................................................................................................................... 1
2 Installing and Upgrading Oracle VM ................................................................................................. 3
3 What's New in Oracle VM? ............................................................................................................. 5
3.1 What's New in Oracle VM Release 3.4.6.1? .......................................................................... 5
3.2 What's New in Oracle VM Release 3.4.6? ............................................................................. 6
3.3 What's New in Oracle VM Release 3.4.5? ............................................................................. 7
3.4 What's New in Oracle VM Release 3.4.4? ........................................................................... 11
3.10 What's New in Oracle VM Release 3.3.3? ......................................................................... 33
4 Notable Bug Fixes ......................................................................................................................... 49
4.1 Bug Fixes in Oracle VM 3.4.6.1 .......................................................................................... 49
4.2 Bug Fixes in Oracle VM 3.4.6 ............................................................................................. 49
4.10 Bug Fixes in Oracle VM 3.3.3 ........................................................................................... 58
5 Supported Guest Operating Systems ............................................................................................. 67
5.1 Oracle VM Server for x86 Supported Guest Operating Systems ............................................ 67
5.2 Oracle VM Server for SPARC Supported Guest Operating Systems ...................................... 70
6 Oracle VM Manager Support for Previous Oracle VM Server Releases ............................................ 73
7 Configuration Limits for Release 3.4 ............................................................................................... 77
8 Deprecated and Removed Oracle VM Features .............................................................................. 85
8.1 Removed Features in 3.4.6 ................................................................................................. 85
8.2 Deprecated Features in 3.4.6 .............................................................................................. 85
9 Known Limitations and Workarounds .............................................................................................. 87
9.1 Integration Between Oracle VM Server for SPARC and Oracle VM Manager .......................... 91
9.2 Upgrading Oracle VM Agent for SPARC Release 3.3.x/3.4.1/3.4.2 to Release 3.4.6 Fails ........ 92
9.3 Editing a Bond Port Fails on Oracle VM Server for SPARC Running Oracle Solaris 11.4 ......... 92
9.4 Cannot Install or Upgrade Oracle VM Manager Release 3.4.5 or 3.4.6 on Oracle Linux 7
Update 6 Guest Virtual Machines .............................................................................................. 92
9.5 Attached Disks Not Visible at Startup on Oracle Solaris 11.4 Virtual Machine ......................... 92
iii
Oracle® VM
9.6 Cannot Re-install Oracle VM Server Across Multiple Disks or LUNs using a Kickstart
Configuration ............................................................................................................................ 93
9.7 Oracle VM Server Installation Hangs with RAID10 Boot Partition ........................................... 93
9.8 Cannot Retrieve Information for File System Mounted on Invalid Mount Point ......................... 93
9.9 Cannot Configure the Oracle Solaris Support Repository using the Oracle VM Manager Web
Interface ................................................................................................................................... 93
9.10 Backup Failure for the MySQL Database Repository .......................................................... 94
9.11 Unable to Login into the Oracle VM Web Services API ....................................................... 94
9.12 Incorrect PVM Migration Error Message Displayed when Secure VM Migration Enabled ........ 95
9.13 Default VM Start Policy Is Different in Oracle VM Manager Command Line Interface and
Oracle VM Manager Web Interface ........................................................................................... 95
9.14 Virtual Machine Fails to Boot with kexec .......................................................................... 95
9.15 Missing Physical Disk Warning for Oracle VM Server Instance After Upgrading Oracle VM
Manager ................................................................................................................................... 95
9.16 Suspend Error During Storage Live Migration ..................................................................... 96
9.17 Cannot Change Memory Configuration of Running PVHVM Guests Based on CentOS 6 ....... 97
9.18 PVHVM Guests Based on CentOS 5 Do Not Start Successfully After Conversion from PVM .. 97
9.19 PVM Guests Based on CentOS 5 Do Not Start Successfully After Conversion from PVHVM .. 97
9.20 Guests Based on CentOS 5.11 Start with the Maximum Memory Configuration .................... 97
9.21 Guests Based on CentOS 5 Display Incorrect Number of VNICs ......................................... 98
9.22 Live Migrating Oracle Solaris Guests to Oracle VM Server Release 3.4.4 or Later Results
in Guest Reboot ....................................................................................................................... 98
9.23 Cannot Remove Software RAID Devices from Oracle VM Manager ..................................... 99
9.24 VNICs Deleted When Editing Virtual Machine ................................................................... 100
9.25 Enable High Availability Option is Disabled Due to Restart Option ..................................... 100
9.26 Cannot Upgrade Oracle VM Manager Due to Presence of Temporary Files ........................ 100
9.27 Job List Excel Spreadsheet Name Contains Unexpected Characters ................................. 100
9.28 Oracle Linux 6 HVM Guest Virtual Machine with Hard Disk of 2TiB in Size Hangs on Boot ... 101
9.29 Kernel Panic when Assigning More Than 32 virtual CPUs to Oracle Linux 32-bit PVM
Guests ................................................................................................................................... 102
9.30 Live Migration of Guest Virtual Machine Fails Due to Linux Kernel Version ......................... 102
9.31 PVHVM Guest Boot Delayed by Xen Balloon Driver ......................................................... 102
9.32 Oracle VM Server Cannot Boot from Software RAID Devices with Disks that are 2TB or
Larger .................................................................................................................................... 103
9.33 Oracle VM Server Does Not Boot After Installation to LUN Targets Larger Than 2TB ........... 103
9.34 Oracle VM Server Boot Delay and I/O Error Messages with Oracle ZFS Storage Array ........ 104
9.35 FIPS Integrity Error Message for SSH Connections from Oracle VM Server ........................ 104
9.36 Incorrect MAC Address Displayed for Bond Port ............................................................... 105
9.37 Kernel Panic when Booting Guest Virtual Machine with 100 or more Virtual Disks ............... 105
9.38 Different Default Values for the serverAffinityType when Creating Anti-Affinity Groups ......... 105
9.39 Performance Impact when Less than 8 CPUs Configured for dom0 ................................... 105
9.40 Upgrading Oracle VM Server from Release 3.2.10 to 3.3.4 and then to 3.4.2 fails ............... 106
9.41 Logical Volume Manager (LVM) is enabled on Oracle VM Server Release 3.4.1 ................. 106
9.42 Btrfs Root File System Not Supported on PVM Guest Virtual Machines .............................. 107
9.43 SUSE Linux Enterprise Server 12 SP2 and Later Not Supported For PVM Guest Virtual
Machines ................................................................................................................................ 107
9.44 Cannot Connect to the Oracle VM Manager Web Interface with Microsoft Internet Explorer .. 107
9.45 The Virtual Machine Console Window in the Oracle VM Manager Web Interface Opens in
the Background when using Microsoft Internet Explorer ............................................................ 107
9.46 Inconsistent Value for SPARC Domain Type .................................................................... 108
9.47 Integer Only Values for the statValue Option .................................................................... 108
9.48 Aborting a Server Discovery Operation Results in Server Listed with an Unknown
Operational State .................................................................................................................... 108
9.49 Automatic Discovery Operations can Conflict with Server Configuration Operations ............. 109
iv
Oracle® VM
9.50 Solaris 11 x86 Virtual Machine Disk Type Can Cause Kernel Panic on Boot ....................... 109
9.51 Solaris 10 x86 Virtual Machine Installation Fails To Boot ................................................... 109
9.52 Oracle Linux 7 Virtual Machines Imported from a VirtualBox Virtual Appliance Do Not Start
on Oracle VM ......................................................................................................................... 110
9.53 (x86 Only) IOStat Stays at 100% Util for Oracle Linux Virtual Machines After a Storage
Migration ................................................................................................................................ 110
9.54 Serial Console Does Not Respond for Oracle Linux 7 HVM Virtual Machines ...................... 111
9.55 Error When Attaching CD-ROM Drives to Running HVM Virtual Machines .......................... 111
9.56 Deleting Bond Ports for VLANIF Interfaces Deletes the VLANIF ........................................ 111
9.57 (SPARC Only) NFSv4 Delegation Interferes with Cluster Heartbeat, Using NFSv3 Results
in RPC Error PROGRAM/VERSION MISMATCH ..................................................................... 112
9.58 Cannot Import OVF Files into Oracle VirtualBox ............................................................... 112
9.59 Oracle VM Manager Cannot Receive Messages from SPARC Virtual Machines .................. 112
9.60 Cannot Boot Oracle VM Server Installed on an HP DL380 Gen9 Server in UEFI mode ........ 112
9.61 (x86 Only) Cannot Boot Oracle VM Server with Broadcom 57840S CNA Card After PXE
Install ..................................................................................................................................... 113
9.62 Changing to Dynamic Mode IP Address Assignment Does Not Rollback if the Server is
Unable to Obtain an IP Address .............................................................................................. 113
9.63 Drag and Drop from Blank Space of Object ..................................................................... 113
9.64 Error When Using the Administrator Tool in Parallel ......................................................... 113
9.65 Oracle VM Manager Command Line Interface TCP Port Conflicts With Port Reserved for
NDMP .................................................................................................................................... 114
9.66 When A Virtual Machine Using A Shared Virtual Disk Is Moved To Another Repository, The
Shared Virtual Disk Is Cloned ................................................................................................. 114
9.67 Unable to Remove a Storage Array if a File System Exists on a LUN ................................. 114
9.68 Cluster Failure After An Offline Server is Removed From the Cluster While Another Cluster
Member is Offline ................................................................................................................... 114
9.69 LSI Logic / Symbios Logic MegaRAID SAS 1078 is not supported on Oracle VM Server ...... 115
9.70 (SPARC Only) Hot-added CD-ROM Device is Detected As Hard Disk ................................ 116
9.71 Fibre Channel LUNs Missing From Oracle VM Manager After Refresh ............................... 116
9.72 (SPARC Only) Size of Physical Disk in Oracle VM Manager Incorrect When LUN Size is
Decreased on Storage Array ................................................................................................... 117
9.73 The Apparent Size of a Repository in Oracle VM Manager Web Interface Does Not Update
Automatically .......................................................................................................................... 117
9.74 Virtual Disks Do Not Display on Solaris 10 Guests ........................................................... 117
9.75 Oracle Linux 5 Virtual Machines Converted from Physical Hosts Do Not Boot ..................... 118
9.76 SSL Exception in AdminServer Log File ........................................................................... 118
9.77 Oracle VM Servers in a Server Pool Must Be at the Same Minor Version ........................... 118
9.78 Oracle VM Manager Displays Incorrect Details for ZFS Storage Appliances After Cluster
Failover .................................................................................................................................. 119
9.79 Oracle VM Server Upgrade Not Possible with NetApp Storage plug-in ............................... 119
9.80 Oracle VM Manager Web Interface Incorrectly Displays Oracle VM Server Upgrade
Required ................................................................................................................................ 119
9.81 The Oracle VM Manager Silent Install Option Using A YAML Configuration File Is
Deprecated ............................................................................................................................. 119
9.82 Aborting An Oracle VM Server Upgrade Initiated By The UpgradeServers.py Script May
Result In Inconsistent Reporting on Upgrade Status ................................................................. 120
9.83 Kdump On Oracle VM Server Only Supports Dump Levels 0 and 1 ................................... 120
9.84 Network Receive Statistics For A Virtual Machine Are Invalid And Set To -1 ....................... 120
9.85 CPU Affinity After Live Migration of Virtual Machine on Non-Uniform Memory Access
(NUMA) Systems .................................................................................................................... 121
9.86 Virtual Machines Based on Oracle Solaris 11 Do Not Boot ................................................ 121
9.87 Changing Domain Type from Xen HVM to Xen HVM PV Drivers Causes Informational
Messages in AdminServer.log ................................................................................................. 121
v
Oracle® VM
9.88 Single-Stream TCP Throughput is Degraded for Guest Virtual Machines Running UEK
Release 4 ............................................................................................................................... 121
9.89 Error Partitioning Caused by Disk Label or Format in UEFI Mode ...................................... 122
9.90 Kernel Panic when Booting Guest Virtual Machine with Oracle Solaris 11.2 ........................ 122
9.91 Oracle VM Manager Web Interface Goes to Blank Screen with Mozilla Firefox on a Linux
System ................................................................................................................................... 122
9.92 HugePages Deprecated for PVM Guests as of Oracle VM Release 3.4.1 ........................... 123
9.93 HugePages Does Not Display as Selected in Oracle VM Manager Web Interface ................ 123
9.94 Kdump Service Hangs at Discovery of FCoE Device with Broadcom CNA on HP Servers .... 123
9.95 Do Not Discover Oracle VM Servers Earlier than Release 3.2.10 ....................................... 123
9.96 (SPARC Only) Cannot Export Virtual Appliance with Physical Disk Access ......................... 124
9.97 (SPARC Only) MTU Resets to the Default of 1500 After Server Power Off ......................... 124
9.98 Oracle VM Server Installer Fails When Modifying Swap Partitions ..................................... 124
9.99 Kernel Startup is Slow after Upgrading to UEK4 on PVHVM Guests .................................. 125
9.100 Cannot Enable High Availability (HA) for Virtual Machines with HugePages ...................... 125
9.101 Kdump is Not Supported on FCoE SANs ....................................................................... 125
9.102 Cannot Edit Running Virtual Machines with HugePages and HA Enabled ......................... 125
9.103 Import URL Cannot Exceed Maximum Character Length ................................................. 126
9.104 Performance Impact for Fewer than 8 CPUs Configured for dom0 ................................... 126
9.105 Migration of PVHVM Guest Virtual Machines may be Affected by Linux Kernel Version ...... 126
9.106 SR-IOV Is Not a Supported Feature ............................................................................... 127
9.107 Oracle VM Manager Upgrade Does Not Restore External Authentication Provider ............. 127
9.108 Limit of 3 Virtual Machine Console Windows with Microsoft Internet Explorer .................... 127
9.109 Virtual Machine Migration Job Loop During Oracle VM Upgrade ...................................... 127
9.110 The kdump Service Cannot Mount the Root Partition if Zone Connection to EMC Storage
Array ...................................................................................................................................... 129
9.111 Oracle VM Server Hangs During Upgrade if Boot Partition Not Large Enough ................... 129
9.112 GRO Must Be Disabled After an Upgrade When Routing/Bridging with IXGBE Driver ........ 129
9.113 Change in Variable Name for the eventGetTypes SOAP Call using Oracle VM Web
Services API .......................................................................................................................... 129
9.114 Restart Virtual Machines After Upgrade ......................................................................... 130
9.115 LRO Setting Bridge Interface ......................................................................................... 130
9.116 Disable Transitional Update Repository .......................................................................... 130
9.117 (X86 Only) SWIOTLB Buffer Errors When Using Jumbo Frames on Oracle VM Server ...... 130
9.118 Operation Transactions ................................................................................................. 130
9.119 One Instance of Oracle VM Manager Web Interface Per Browser Session ........................ 131
9.120 IPv6 Updates On Some Microsoft Windows Guests Do Not Reflect in Oracle VM Manager 131
9.121 Incorrect Text Color After Acknowledging VM Errors ....................................................... 131
9.122 Unable to Copy Text or Take Screen Shots of Error Dialogs ........................................... 131
9.123 Safari Web Browser on Windows is not Supported ......................................................... 132
9.124 Object Lock Prevents Some Operations ......................................................................... 132
9.125 Unable to Configure NTP For All Servers ....................................................................... 132
9.126 (x86 Only) Oracle VM Server Installer Goes To Black Screen After Running /sbin/
loader .................................................................................................................................. 132
9.127 (x86 Only) Oracle VM Server Installer Hangs Waiting for Hardware to Initialize ................. 133
9.128 (x86 Only) Oracle VM Server Installer Hangs Examining Storage Devices For Large
Number of LUNS .................................................................................................................... 133
9.129 (x86 Only) Benign Error Message During Install: HDIO_GET_IDENTITY failed .................. 133
9.130 (x86 Only) Cannot Use Installation Media to Upgrade Oracle VM Server if Earlier than
Release 3.3.x ......................................................................................................................... 133
9.131 (x86 Only) Oracle VM Server Upgrade From ULN or Oracle Public Yum Repositories is
Restricted to Servers That Do Not Use Non-Native Packages ................................................... 134
9.132 (x86 Only) Many ISCSI or Fibre Channel LUNs Require More Server Memory .................. 134
vi
Oracle® VM
9.133 Clustered Server Pools in Mixed Platform Environments Require NFS Access Groups To
Be Configured ........................................................................................................................ 134
9.134 (SPARC Only) Cluster Recovery May Fail When Using NFSv3 For Server Pool File
System ................................................................................................................................... 135
9.135 (x86 Only) Server BIOS Settings ................................................................................... 135
9.136 (x86 Only) Oracle VM Server Does Not Support crashkernel=auto Boot Parameter ........... 135
9.137 Kdump Core Collector Using Sparse Copy Fails ............................................................. 136
9.138 (x86 Only) Oracle VM Server Installation on Sun Fire X4800 ........................................... 136
9.139 (x86 Only) Installation of Oracle VM Server on some HP Server Hardware May Fail if
Tape Drive is Attached ........................................................................................................... 136
9.140 (x86 Only) Wake On Lan (WOL) Fails if Oracle VM Servers on Different Subnets .............. 136
9.141 (x86 Only) Sun Fire X4170 Server Not Fenced During Cluster Failure .............................. 137
9.142 (x86 Only) Netconsole Unknown Error 524 During Oracle VM Server Start-up .................. 137
9.143 (x86 Only) ACPI Buffer Error After Installing Oracle VM Server ........................................ 137
9.144 Failed Server Evacuation Defined in DPM Policy Generates User Acknowledgeable Event 137
9.145 (SPARC Only) Serial Console Hangs During Installation of Oracle Solaris 11 on Virtual
Machine ................................................................................................................................. 138
9.146 Editing Virtual Machine Configuration File Results in Unexpected Behavior ....................... 138
9.147 Concurrent Template Operations May Fail Due to Lock Issue .......................................... 138
9.148 (SPARC Only) Wrong Error Message Returned When Importing A Template From An
Incorrect URL ......................................................................................................................... 139
9.149 (x86 Only) Virtual Machine Fails to Restart On Another Server in the Cluster if ACPI is
Enabled .................................................................................................................................. 139
9.150 (x86 Only) Oracle Solaris 10 Virtual Machine May Hang During Shutdown ....................... 139
9.151 (x86 Only) Virtual Machine Created with Network (PXE) Installation Does Proceed
Beyond Pre Boot .................................................................................................................... 139
9.152 (x86 Only) Maximum Memory to Start a PVM Guest is 470 GB ....................................... 140
9.153 (x86 Only) Creating a PVM Guest Slow Using Local Storage ........................................... 140
9.154 (x86 Only) Live Migration of a VM may be Affected by Guest Linux Kernel Version ............ 140
9.155 (x86 Only) Improving Mouse Pointer Control in Virtual Machine Console .......................... 140
9.156 (x86 Only) Solaris 10 Kernel Panic on Some AMD Systems ............................................ 140
9.157 (x86 Only) Solaris 10 Release 8/11 Guest Hangs at Boot ................................................ 141
9.158 (x86 Only) Solaris 11 Guest With More Than 2 VCPUs Hangs at Boot ............................. 141
9.159 (x86 Only) Solaris 11 Release 2011.11 Guest Hangs at Boot .......................................... 142
9.160 (x86 Only) Windows Server 2008 R2 x64 HVM Guests do Not Cleanly Shut Down ............ 142
9.161 (SPARC Only) Need Actual Available Memory for Live Migration ..................................... 143
9.162 (x86 Only) Network Card Limit in Virtual Machines ......................................................... 143
9.163 QLogic cLOM8214 1/10 Gigabit Ethernet NIC Initializes with Link State Down .................. 143
9.164 Renaming of QLogic cLOM8214 1/10 Gigabit Ethernet NIC is Incorrect ............................ 143
9.165 (x86 Only) Incorrect ARP Reply When Using Jumbo Frames ........................................... 144
9.166 (x86 Only) Changing Cluster Heartbeat Network Does Not Reflect New IP Address ........... 144
9.167 NFSv4 Read/Write Delegation Not Supported ................................................................. 145
9.168 (x86 Only) Unclean File System Causes Errors When Used as a Server Pool File System . 145
9.169 (SPARC Only) Agent Fails to Reconcile Multipath LUNS If Solaris I/O Multipathing is
Disabled ................................................................................................................................. 145
9.170 (x86 Only) Size of New LUN on Server is Incorrect If an Existing LUN Is Unmapped First ... 146
9.171 (x86 Only) Remapping LUNs Causes Storage Refresh To Hang ...................................... 146
9.172 (x86 Only) LUNs Must Be Cleaned Prior to Storage Repository Creation .......................... 146
9.173 NetApp ONTAP (8.2 c-mode) Operating System Does Not Work With Oracle VM ............. 147
9.174 (x86 Only) Black Listing of System Disks for Legacy LSI MegaRAID Controllers Not
Supported ............................................................................................................................... 147
9.175 (x86 Only) Blacklisting of System Disks for Multipathing Fails on HP Smart Array (CCISS)
Disk Devices .......................................................................................................................... 147
vii
Oracle® VM
9.176 (x86 Only) HP Smart Array CCISS Disk Devices Are Not Supported For Creation of Local
Storage Repositories .............................................................................................................. 148
9.177 (x86 Only) Multiple Paths Used in Multipath Environments on Oracle Pillar Axiom Storage . 148
9.178 Refreshing a NAS-based File System Produces Invalid/Overlapping Exports .................... 148
9.179 (x86 Only) Shared OCFS2 Cluster File System on Virtual Disk Not Supported .................. 149
9.180 Virtual Disk Images Must Be Properly Aligned To The OCFS2 Block Size For
Performance ........................................................................................................................... 149
9.181 Oracle VM Manager Command Line Interface Backspace Key ........................................ 149
9.182 Oracle VM Manager Command Line Interface Allows THIN_CLONE cloneType On NFS .... 150
9.183 Untagged VLAN Interface Missing After Upgrade of Oracle VM Manager .......................... 150
10 Additional Software for Oracle VM .............................................................................................. 153
10.1 Oracle VM Paravirtual Drivers for Microsoft Windows ....................................................... 153
10.2 Oracle VM Storage Connect plug-ins ............................................................................... 153
10.3 Oracle VM Guest Additions ............................................................................................. 153
10.4 Oracle VM Utilities .......................................................................................................... 153
10.5 Oracle Enterprise Manager .............................................................................................. 154
10.6 Third Party Software ....................................................................................................... 154
11 Oracle VM Accessibility Features ............................................................................................... 155
viii
Preface
The Oracle VM Release Notes contain information on Oracle VM Release 3.4 and supersedes the product
documentation. This document contains last-minute information that could not be included the Oracle VM
documentation. Read this document before installing Oracle VM. This document may be updated after it
is released. To check for updates to this document, and to view other Oracle documentation, refer to the
Documentation section on the Oracle Technology Network (OTN) Web site:
http://www.oracle.com/technology/documentation/
The release notes provided for each subsequent release of Oracle VM are published as individual
documents at the time that the release is made available. You should check that you are referring the
correct document for the release that you are interested in. The release notes for each of the Oracle VM
3.4.x releases is available at:
http://download.oracle.com/docs/cd/E64076_01
This document is intended for users, and administrators of Oracle VM. It includes describes potential
issues and the corresponding workarounds you may encounter while using Oracle VM.
Oracle recommends that you read this document before installing and using Oracle VM.
Audience
This document is intended for Oracle VM administrators with privileged access to the physical and virtual
resources of the Oracle VM environment. This guide assumes that you have an in depth knowledge of
Oracle VM (see the Oracle VM Manager User's Guide), and that you are familiar with Oracle Linux system
administration and Linux command line operation.
Related Documents
For more information, see the following documents in the Oracle VM documentation set:
• Oracle VM Release Notes
• Oracle VM Installation and Upgrade Guide
• Oracle VM Concepts Guide
• Oracle VM Manager Getting Started Guide
• Oracle VM Manager User's Guide
• Oracle VM Manager Command Line Interface User's Guide
• Oracle VM Administrator's Guide
• Oracle VM Paravirtual Drivers for Microsoft Windows Guide
• Oracle VM Web Services API Developer's Guide
• Oracle VM Security Guide
• Oracle VM Licensing Information User Manual
You can also get the latest information on Oracle VM by going to the Oracle VM Web site:
ix
Command Syntax
http://www.oracle.com/us/technologies/virtualization/oraclevm
Command Syntax
Oracle Linux command syntax appears in monospace font. The dollar character ($), number sign (#), or
percent character (%) are Oracle Linux command prompts. Do not enter them as part of the command.
The following command syntax conventions are used in this guide:
Convention Description
backslash \ A backslash is the Oracle Linux command continuation character. It is used in
command examples that are too long to fit on a single line. Enter the command
as displayed (with a backslash) or enter it on a single line without a backslash:
dd if=/dev/rdsk/c0t1d0s6 of=/dev/rst0 bs=10b \
count=10000
braces { } Braces indicate required items:

.DEFINE {macro1}
brackets [ ] Brackets indicate optional items:

cvtcrt termname [outfile]
ellipses ... Ellipses indicate an arbitrary number of similar items:

CHKVAL fieldname value1 value2 ... valueN
italics Italic type indicates a variable. Substitute a value for the variable:
library_name
vertical line | A vertical line indicates a choice within braces or brackets:

FILE filesize [K|M]
forward slash / A forward slash is used to escape special characters within single or double
quotes in the Oracle VM Manager Command Line Interface, for example:
create Tag name=MyTag description="HR/'s VMs"
Conventions
The following text conventions are used in this document:
Convention Meaning
boldface Boldface type indicates graphical user interface elements associated with an
action, or terms defined in text or the glossary.
italic Italic type indicates book titles, emphasis, or placeholder variables for which
you supply particular values.
monospace Monospace type indicates commands within a paragraph, URLs, code in
examples, text that appears on the screen, or text that you enter.
Documentation Accessibility
For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website
at
http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.
x
Access to Oracle Support
Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle
Support. For information, visit
http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?
ctx=acc&id=trs if you are hearing impaired.
xi
xii
Chapter 1 Introduction
Oracle VM is a platform that provides a fully equipped environment for better leveraging the benefits of
virtualization technology. Oracle VM enables you to deploy operating systems and application software
within a supported virtualization environment. The components of Oracle VM are as follows:
Oracle VM Server for x86

Oracle VM Server for x86 (Oracle VM Server) is a self-contained virtualization environment designed to
provide a lightweight, secure, server-based platform to run virtual machines on x86 hardware. Oracle VM
Server is based upon an updated version of the underlying Xen hypervisor technology, and includes Oracle
VM Agent. It also includes a Linux kernel with support for a broad array of devices and file systems. The
Linux kernel is run as Dom0 to manage one or more DomU virtual machines, each of which could be Linux,
Oracle Solaris, or Microsoft Windows.
Oracle VM Server for SPARC

Oracle VM Server for SPARC (previously called Sun Logical Domains) is Oracle's server virtualization and
partitioning technology on SPARC servers. Oracle VM Server for SPARC leverages the SPARC hypervisor
to subdivide supported platforms' resources (CPUs, memory, I/O, and storage) by creating logical domains,
also called virtual machines, to take advantage of the massive thread scale offered by SPARC servers and
the Oracle Solaris operating system.
Oracle VM Manager
Oracle VM Manager is a server side component that allows you to configure and manage your Oracle VM
environment. Oracle VM Manager includes both a command line interface and a web-based user interface,
which is a standard Application Development Framework (ADF) web application. Oracle VM Manager
provides virtual machine management facilities, including creating virtual machines from installation media
or from templates. It provides features such as power on, power off, deleting, importing, deploying, and
live migration of virtual machines. Oracle VM Manager also manages resources, including ISO files, virtual
machine templates, and shared virtual disks.
This document sets out to describe items of interest and relevance to the current release of Oracle
VM. The release notes provided for each subsequent release of Oracle VM are published as individual
documents at the time that the release is made available. You should check that you are referring to the
correct document for the release that you are interested in. The release notes for each of the Oracle VM
3.4.x releases is available at:
http://download.oracle.com/docs/cd/E64076_01
Note
This errata update for Oracle VM Release 3.4 provides complete installation
packages for Oracle VM Manager and Oracle VM Server. Starting with Oracle
VM 3.4.6, the latest versions of these two components will be driven by the
build number (for example, 3.4.6-21xx). The Oracle VM Server version stays
at 3.4.6-2105 with the latest package updates posted to the Unbreakable Linux
Network (ULN) channels and Yum repositories. Each errata update for Oracle VM
includes all cumulative enhancements, bug fixes, and security updates since Oracle
VM Release 3.4.1.
1
2
Chapter 2 Installing and Upgrading Oracle VM
The Oracle VM Installation and Upgrade Guide explains how to install and upgrade Oracle VM. For
instructions on:
• Installing Oracle VM Server, see Installing Oracle VM Server.
• Installing Oracle VM Manager, see Installing Oracle VM Manager.
• Upgrading between Oracle VM 3.x releases, see Upgrading Oracle VM.
Restrictions for Upgrading

You can upgrade Oracle VM between 3.x Releases only; for example, upgrading from Oracle VM Release
3.3.1 to 3.4.1. You cannot upgrade from a Release 2.x to a Release 3.x, however. In this case, you must
reinstall Oracle VM Servers and Oracle VM Manager.
Upgrading versions of Oracle VM Manager that are using an Oracle XE database as a back end repository
is not supported in this release, as the Oracle XE database is no longer supported under Oracle VM. If you
are currently running an Oracle XE database for an existing installation of Oracle VM Manager, you must
migrate the Oracle XE database to Oracle SE or Oracle EE before performing an upgrade to Release 3.4.
As of Release 3.4.5, Oracle VM Manager uses the TLSv1.2 protocol as the default to secure all
connections. As a result, management of Oracle VM Server for x86 at Release 3.2.10 or 3.2.11, and
Oracle VM Agent for SPARC at Release 3.3.1, is not possible by default. When upgrading to Release
3.4.5, you need to temporarily enable TLSv1 until all Oracle VM Servers have been upgraded to the latest
version. For instructions to enable TLSv1, and revert to the default and more secure TLSv1.2 protocol, see
Enabling the TLS Version 1 Protocol in the Oracle VM 3.4 Installation and Upgrade guide.
As of Release 3.4.6, management of Oracle VM Server for x86 at 3.2.1x and Oracle VM Agent for SPARC
at Release 3.3.1 is removed. For more information, see Upgrading Oracle VM Server from Release 3.2.10
and Upgrading from Oracle VM Agent for SPARC Release 3.3.x or Between 3.4.x Errata Releases in the
Oracle VM 3.4 Installation and Upgrade guide.
3
4
Chapter 3 What's New in Oracle VM?
Table of Contents
3.1 What's New in Oracle VM Release 3.4.6.1? .................................................................................. 5
3.2 What's New in Oracle VM Release 3.4.6? ..................................................................................... 6
3.3 What's New in Oracle VM Release 3.4.5? ..................................................................................... 7
3.4 What's New in Oracle VM Release 3.4.4? ................................................................................... 11
3.10 What's New in Oracle VM Release 3.3.3? ................................................................................. 33
Review the new features and enhancements in each release of Oracle VM.
3.1 What's New in Oracle VM Release 3.4.6.1?

Oracle VM Release 3.4.6.1 includes features, enhancements, and security updates that were included in
previous 3.4.x errata releases.
New features and enhancements included in Oracle VM Release 3.4.6.1 are as follows:
New Release Process

Oracle VM Changes to the A new release model has been put in place for Oracle VM Release
Release Process 3.4.6.1, resulting in the following changes to the release process:
• Oracle VM Manager and Oracle VM Agent for SPARC are released

as new build versions, while Oracle VM Server stays at build
version 3.4.6-2105 with new packages being made available on the
appropriate Oracle VM ULN channels and yum repositories.
• The latest versions of the Oracle VM Manager and Oracle VM Agent

for SPARC can be downloaded from the Oracle Software Delivery
Cloud (OSDC), My Oracle Support (MOS) or Oracle Technology
Network (OTN).
• For Oracle VM Server, you must ensure that you have installed
build version 3.4.6-2105 and have updated the packages using the
appropriate Oracle VM ULN channels or yum repositories.
Security
Security updates included Security updates included in this errata update release are as follows:
5
What's New in Oracle VM Release 3.4.6?
• MySQL patch update: This release of Oracle VM includes the April 2019 Critical Patch Update for
MySQL. (29515159)
• Oracle WebLogic Server patch updates: This release of Oracle VM includes the April 2019 Critical
Patch Update for Oracle WebLogic Server and the Overlay Patch to address CVE-2019-2725.
(29515018 and 29713285)
• Oracle Java patch update: This release of Oracle VM includes the April 2019 Critical Patch Update for
Java. (29515182)
• Third party code: This release of Oracle VM Manager includes updates for a number of a third party
packages.
3.2 What's New in Oracle VM Release 3.4.6?

Oracle VM Release 3.4.6 includes features, enhancements, and security updates that were included in
New features and enhancements included in Oracle VM Release 3.4.6 are as follows:
Infrastructure
Oracle VM Agent for SPARC The Oracle VM Agent for SPARC has been updated to support Oracle
Support for Oracle Solaris 11.4 Solaris 11.4. For more information, refer to the Oracle VM Installation
and Upgrade Guide.
Update to the dom0 Kernel The dom0 kernel for Oracle VM Server is updated to the latest
Unbreakable Enterprise Kernel Release 4 Update 7 (UEK R4 U7) in
this release. See the UEK R4 U7 Release Notes for information on new
features and updates: Release Notes for Unbreakable Enterprise Kernel
Release 4 Update 7.
Ksplice
Support for Ksplice patching for Oracle VM Server now supports Ksplice patching for the Xen hypervisor
Xen and user space and critical user space packages. This product enhancement extends
the Ksplice kernel patching support already offered on the Oracle VM
Server to cover the following Oracle VM components:
• Xen hypervisor
• glibc
• OpenSSL
• QEMU
Oracle Ksplice technology allows you to update systems with new
security errata (CVE) patches without the need to reboot. This enables
you to remain current with operating system vulnerability patches while
minimizing downtime. For additional information, see Updating Oracle
VM Server with Oracle Ksplice in the Oracle VM Administrator's Guide
6
Usability
Usability
New User-Defined Validity in Months Option for Self-Signed SSL Certificates
A new Validity in Months option is now available when generating a new SSL certificate,
allowing you to set the validity period for a self-signed SSL certificate in months. The default is
120 months (10 years). For more information, see Generating a New SSL Key in the Oracle VM
Administrator's Guide.
New Option to Change the Location of a Running Virtual Machine
A new Move this VM to a different Repository option is now available to move a vm.cfg
file from one repository to another while the virtual machine is in running state by creating an empty
clone customizer. For more information, see Migrate or Move Virtual Machines in the Oracle VM
Manager User's Guide.
Increased Virtual CPU Configuration Limit for HVM and PVHVM
The Virtual CPU limit has been increased to 64 for HVM Microsoft Windows guests and for PVHVM,
if using Oracle VM Paravirtual Drivers for Microsoft Windows. For more information, see Table 7.3,
“Virtual Machine Maximums”.
Deprecated Features
Oracle VM Release 3.4.6 Deprecated Features
For information about features that have been deprecated or removed in Oracle VM Release 3.4.6, see
Chapter 8, Deprecated and Removed Oracle VM Features in the Oracle VM Release Notes.
Security
• Oracle MySQL patch update: This release of Oracle VM includes the October 2018 Critical Patch
Update for MySQL. (28328418)
• Oracle WebLogic patch update: This release of Oracle VM includes the October 2018 Critical Patch
Update for WebLogic. (28328407)
• Oracle Java patch update: This release of Oracle VM includes the October 2018 Critical Patch Update
for Java. (28328428)
• Xen security advisories: The following Xen security advisories are included in this release:
• XSA-263 (CVE-2018-3639)
• XSA-267 (CVE-2018-3665)
• XSA-273 (CVE-2018-3620, CVE-2018-3646)
• XSA-282

7
Infrastructure
Infrastructure
Update to the dom0 Kernel The dom0 kernel for Oracle VM Server is updated to Unbreakable
Enterprise Kernel Release 4 Update 7 (UEK R4 U7) in this release.
See the UEK R4 U7 Release Notes for information on new features
and updates: https://docs.oracle.com/cd/E93554_01/E94694/html/
index.html.
Update to Boot Protocol Support The updated Xen hypervisor for Oracle VM Server is delivered as a
for Xen single binary, named xen.mb.efi instead of xen.gz, which can be
loaded by the EFI loader, Multiboot, and Multiboot2 protocols.
Package Additions and Updates The full list of package additions and updates is beyond the scope
of this document, but the following list includes the notable package
updates that are included in this release:
• cloud-init-0.7.5-8.0.1.el6_9.x86_64.rpm
• oswatcher-7.3.3-3.el6.x86_64.rpm
• boost-filesystem-1.41.0-28.el6.x86_64.rpm
• boost-regex-1.41.0-28.el6.x86_64.rpm
• boost-python-1.41.0-28.el6.x86_64.rpm
• libyaml-0.1.3-4.el6_6.x86_64.rpm
• PyYAML-3.10-3.1.el6.x86_64.rpm
• oracle-ofed-release-1.0.0-41.el6.x86_64.rpm
Several other user space packages were also updated to align with the
latest Oracle Linux 6 Update 9 versions, or to resolve dependencies.
Performance and Scalability

Increased Performance for This release provides the ability to enable the exposure of Windows
Microsoft Windows guest virtualization (also referred to as viridian) compatible entitlements to
operating systems Microsoft Windows guest operating systems. Enabling viridian support
is strongly recommended to ensure improved performance for all
Microsoft Windows guest operating systems. For more information
about how to enable this support, see Create Virtual Machine in the
Oracle VM Manager User's Guide.
Hybrid Columnar Compression As of this release, Oracle VM provides support for Hybrid Columnar
Support Compression (HCC) on Oracle Database Release 18c with Oracle ZFS
Storage Appliance and Oracle FS1 Series Flash Storage Systems.
Hybrid Columnar Compression is an Oracle Database compression
technology that enables the highest levels of data compression and
provides cost savings and performance improvements due to reduced I/
O.
Note
The following RPM packages are required

for Oracle VM to provide support for Hybrid
8
Usability
Columnar Compression (HCC) on Oracle

Database Release 18c:
• The ovmport-1.0-8.el6.x86_64.rpm
package must be installed on the Oracle VM
Server instance. This package is included by
default with the Oracle VM Server Release
3.4.5 ISO.
• The libxenstore and libxenstore-

devel packages must be installed on the
Oracle Linux 6 or 7 guest. These packages
are available from the addons channel for the
Oracle Linux Yum Server.
For more information, see the Hybrid Columnar Compression section of

the Oracle Database Concepts guide for Oracle Database Release 18c.
Usability
Additional VM Migration Check Added to Oracle VM Manager Stop and Restart Options
A check_migrate option is now available for use with the Oracle VM Manager stop and restart
commands, allowing you to check for active VM migration jobs that are triggered by a server pool load
balancing job. For more information, see Starting and Stopping Oracle VM Manager in the Oracle VM
Installation and Upgrade Guide.
New Start Policy Available for A new virtual machine start policy called Balance Server is now
Virtual Machines available for selection when creating or editing a server pool or virtual
machine. Virtual machines can be started on the best available Oracle
VM Server as determined by CPU and memory utilizations, with CPU
utilization taking precedence over memory utilization. This ensures that
virtual machines are evenly distributed amongst all Oracle VM Servers
in the server pool, starting with the least utilized Oracle VM Server
first. For more information, see Servers and VMs Tab in the Oracle VM
New LIP Scan Option for Fibre A Loop Initialization Protocol (LIP) scan is now optional and can be
Channel Storage Arrays enabled when modifying an Unmanaged FibreChannel Storage Array.
A LIP issued to an Oracle VM Server connected to a fabric causes
the Host Bus Adapter (HBA) driver to reset the SCSI bus and as a
result, may also cause the target to reset. Disabling a LIP scan for an
Unmanaged FibreChannel Storage Array may result in faster times
for storage array refreshes when configuring a new SCSI target on a
Fibre Channel interconnect. For more information, see the Storage Tab
section in the Oracle VM Manager User's Guide and the CLI Command
Reference section in the Oracle VM Manager Command Line Interface
User's Guide .
Server Upgrade Warning Events Displayed with Blue Icon
After an Oracle VM Manager upgrade, there are warning events associated with each Oracle VM
Server that has not yet been upgraded to the latest version. Oracle recommends that you upgrade to
the latest version of Oracle VM Server at your earliest convenience, but it is not a strict requirement.
Previously, both warnings and errors were displayed in the Events perspective of the Oracle VM
Manager Web Interface with the same red icon, although in practice there is a clear difference in
9
Documentation
severity level and priority. As of this release, the warning events for Oracle VM Servers requiring
upgrade are displayed with a blue icon, to make them visually distinguishable.
Documentation
New Section Listing Oracle VM Release 3.4 Deprecated Features
As of Oracle VM Release 3.4.5, a new section called Chapter 8, Deprecated and Removed Oracle VM
Features has been added to the Oracle VM Release Notes. This can be used to track features that
have been deprecated and removed for current and previous Oracle VM Release 3.4.x release.
Security
Support for TLS Version 1.2 As of this release, Oracle VM Manager uses the TLSv1.2 protocol for
Protocol all connections to ensure enhanced security protection. As a result,
management of Oracle VM Server for x86 at Release 3.2.10 or 3.2.11,
and Oracle VM Agent for SPARC at Release 3.3.1, is not possible
by default. It is strongly recommended to upgrade your Oracle VM
Server instances to the latest version, but if this is not possible, you can
enable the TLSv1 protocol, which is less secure. For instructions, see
Enabling the TLS Version 1 Protocol in the Oracle VM 3.4 Installation
and Upgrade guide.
Xen 4.4.x Performance and Scalability Updates
• Idle Driver Updates: The mwait idle driver has been improved to make use of deeper C-states on
Broadwell and Skylake platforms. In addition, turbo boost works properly when C-states are in use.
• Better ACPI Handling: ACPI handling has been improved to enable turbo boost functionality on
Oracle Server X7 based platforms.
• Improved Memory Scrubbing: The scrubbing mechanism allows better handling of memory
assigned to a domain close to the host boundaries. This prevents out-of-memory issues when guest-
driven reboots occur.
• APICv Support: On platforms that support it, APICv is exposed, allowing guests to use native MSI-X
handling for PCI devices, instead of pirqs. This results in a latency improvement of approximately 10
percent for certain workloads.
• Oracle MySQL patch update: This release of Oracle VM includes the April 2018 Critical Patch Update
for MySQL. (26836018)
• Oracle WebLogic patch update: This release of Oracle VM includes the April 2018 Critical Patch
Java. (26836007)
• XSA-231 (CVE-2017-14316)
• XSA-233 (CVE-2017-14317)
• XSA-234 (CVE-2017-14319)
10
• XSA-236 (CVE-2017-15597)
• XSA-237 (CVE-2017-15590)
• XSA-239 (CVE-2017-15589)
• XSA-240 (CVE-2017-15595)
• XSA-241 (CVE-2017-15588)
• XSA-242 (CVE-2017-15593)
• XSA-243 (CVE-2017-15592)
• XSA-244 (CVE-2017-15594)
• XSA-246 (CVE-2017-17044)
• XSA-247 (CVE-2017-17045)
• XSA-248 (CVE-2017-17566)
• XSA-249 (CVE-2017-17563)
• XSA-250 (CVE-2017-17564)
• XSA-251 (CVE-2017-17565)
• XSA-252 (CVE-2018-7540)
• XSA-254 (CVE-2017-5753, CVE-2017-5715, CVE-2017-5754)
• XSA-255 (CVE-2018-7541)
• XSA-260 (CVE-2018-8897)
• XSA-261 (CVE-2018-10982)
• XSA-262 (CVE-2018-10981)

Infrastructure
Support for Microsoft Windows As of this release, Oracle VM supports Microsoft Windows Server 2016
Server 2016 guest operating systems. See Chapter 5, Supported Guest Operating
Systems.
Update to the dom0 Kernel The dom0 kernel for Oracle VM Server is updated to Unbreakable
Enterprise Kernel Release 4 Update 4 (UEK R4 U4) in this release.
See the UEK R4 U4 Release Notes for information on new features
11
and updates: https://docs.oracle.com/cd/E52668_01/E86280/html/

index.html.
Support for Skylake processors Oracle VM provides improved support for servers that use Skylake
processors, including the Intel® Xeon® E3 v5, Intel® Xeon® Platinum
8100, Intel® Xeon® Gold 6100, Intel® Xeon® Gold 5100, Intel® Xeon®
Silver 4100 and Intel® Xeon® Bronze 3100 families of processors. This
support is available as part of the dom0 kernel update to UEK R4 U4.
• This release adds the network-scripts-vxlan package.
• The device-mapper-multipath, kpartx, and udev packages

are updated as follows:
• device-mapper-multipath-
libs-0.4.9-100.0.3.el6.x86_64
• device-mapper-multipath-0.4.9-100.0.3.el6.x86_64
• kpartx-0.4.9-100.0.3.el6.x86_64
• libgudev1-147-2.73.0.1.el6_8.2.x86_64
• libudev-147-2.73.0.1.el6_8.2.x86_64
• udev-147-2.73.0.1.el6_8.2.x86_64
• The irqbalance package is updated to

irqbalance-1.0.9-2.0.1.el6.x86_64.

Increased Performance for This release provides several enhancements to increase the
Oracle VM performance of Oracle VM. These enhancements enable Oracle VM to
utilize fewer resources and improve performance measurements such
as input/output operations per second (IOPs).
Xen 4.4.4 Performance and • Update to netfront and netback drivers: Along with UEK R4 U4,
Scalability Updates this release of Oracle VM delivers updates to the netfront and netback
drivers.
•
Improved grant locking: Xen-netback multi-queue improvements
take advantage of grant locking enhancements that are now available
in Oracle VM Server Release 3.4.4.
•
Improved guest performance by recycling grants: With both host
and guest virtual machines using the latest dom0 kernel version UEK
R4 U4, network and database performance is enhanced by recycling
grants, resulting in improved guest virtual machine performance.
12
Usability
Usability
CentOS is now listed as a supported guest OS type in Oracle VM
Oracle VM now displays CentOS as a supported guest operating system in the Oracle VM Manager
Web Interface, Oracle VM Manager Command Line Interface, and Oracle VM Web Services API.
Documentation
New Location for the Oracle VM Paravirtual Drivers for Microsoft Windows Documentation
As of Oracle VM Release 3.4.4, the Oracle VM Paravirtual Drivers for Microsoft Windows
documentation has moved to a new library location: http://docs.oracle.com/cd/E88077_01/index.html.
Note
Oracle VM Release 3.4, Release 3.3, and Release 3.2 library pages are
updated with a Related Documentation section that includes a link to the Oracle
VM Paravirtual Drivers for Microsoft Windows library. For example, see http://
docs.oracle.com/cd/E64076_01/index.html.
Security
Security updates included in this errata update release are as follows:
• Oracle MySQL patch update: This release of Oracle VM includes the July 2017 Critical Patch Update
for MySQL. (26120786)
• Oracle WebLogic patch update: This release of Oracle VM includes the July 2017 Critical Patch
• Oracle Java patch update: This release of Oracle VM includes the July 2017 Critical Patch Update for
Java. (26120782)
• XSA-216 (CVE-2017-10911)
• XSA-217 (CVE-2017-10912)
• XSA-218 (CVE-2017-10913, CVE-2017-10914)
• XSA-219 (CVE-2017-10915)
• XSA-220 (CVE-2017-10916)
• XSA-221 (CVE-2017-10917)
• XSA-222 (CVE-2017-10918)
• XSA-223 (CVE-2017-10919)
• XSA-224 (CVE-2017-10920, CVE-2017-10921, CVE-2017-10922)
• XSA-226 (CVE-2017-12135)
• XSA-227 (CVE-2017-12137)
13
• XSA-228 (CVE-2017-12136)
• XSA-230 (CVE-2017-12855)

The new features and enhancements in Oracle VM Release 3.4.3 include:
Installation and Upgrades

Simplified UEFI PXE Boot for As of this release, you do not need to manually build the GRUB 2 boot
Oracle VM Server loader to install Oracle VM Server on UEFI-based systems in a PXE
boot environment. The Oracle VM Server ISO image file provides the /
EFI/BOOT/grubx64.efi boot loader for UEFI-based systems. See
Installing Oracle VM Server for x86 from PXE Boot in the Oracle VM
Installation and Upgrade Guide.
Note
If you plan to install Oracle VM Server on BIOS-

based systems, you use the pxelinux.0 boot
loader from the syslinux package on Oracle
Linux.
Infrastructure
Support for Software RAID You can now create kickstart configurations that assemble software
Devices with Oracle VM Server RAID devices during the Oracle VM Server installation. See Software
RAID Partitions in the Oracle VM Installation and Upgrade Guide.
You can also create software RAID devices in dom0 after installation.
Oracle VM Server then presents those software RAID devices to Oracle
VM Manager so that you can use them as storage repositories or for
virtual disks. See Configuring Software RAID for Storage in the Oracle
VM Administrator's Guide.
Important
The following notes apply to using software

RAID devices with Oracle VM Server in this
release:
• Oracle VM Server supports installation on

software RAID devices on BIOS-based
systems only.
• You should not attempt to install Oracle VM

Server on a software RAID if a disk that is 2
TB or larger is a member of the array. Due
to a limitation with the Master Boot Record
(MBR), Oracle VM Server cannot boot from
disks that are 2 TB or larger in a software
RAID configuration.
14
Infrastructure
• As a best practice, you should use software

RAID devices as storage repositories in a test
environment before using them in a production
environment.
• In environments where you use software RAID

devices as storage repositories for server
pools, unexpected behavior can occur with
certain virtual machine migration operations.
For example, if you clone a virtual machine
and then attempt to live migrate it to an
instance of Oracle VM Server in the same
server pool, the migration fails with an error
that indicates the virtual machine disk does
not exist. In this case, you must stop the virtual
machine and then move it to the appropriate
instance of Oracle VM Server.
Support for Microsoft Windows Microsoft Windows Server guests can now use SCSI-3 persistent
Server Failover Clustering reservation to form a Windows Server Failover Cluster (WSFC) with
Oracle VM Paravirtual Drivers for Microsoft Windows Release 3.4.2
or later. See Oracle VM Paravirtual Drivers for Microsoft Windows
for information about failover cluster capabilities on specific Microsoft
Operating System versions.
Update to Oracle VM Agent for As of this release, Oracle VM Agent for SPARC is updated to run
SPARC Python 2.7.
Update to the dom0 Kernel The dom0 kernel is updated to a newer Unbreakable
Enterprise Kernel Release 4 (UEK R4) version kernel-
uek-4.1.12-61.40.1.el6uek.x86_64.rpm.
Note
This UEK R4 kernel update is a quarterly update

2 (QU2) errata version.
If you received a one-off version of UEK R4 QU2

before this release, you should upgrade Oracle
VM Server to UEK R4 QU4 after you upgrade
to Oracle VM Release 3.4.3. Upgrading the
kernel ensures your Oracle VM Servers include
any bug fixes that were included in the one-off
version of UEK R4 QU2.
If you are upgrading from an earlier release of

Oracle VM, such as Release 3.4.2, and you
have a mainstream version of UEK R4, you can
optionally upgrade Oracle VM Server to UEK R4
QU4 after you upgrade to Oracle VM Release
3.4.3.
The UEK R4 QU4 version of the kernel is

available on the Oracle Linux Yum Server for all
Oracle VM Release 3.4.3 users.
15
• The tzdata package is updated to

tzdata-2017b-1.el6.noarch.rpm.
• The Netscape Portable Runtime (NSPR) package is updated to

nspr-4.11.0-1.el6.x86_64.rpm.
• The ovmport package is updated to

ovmport-1.0-6.el6.x86_64.rpm.
Updates to Multipath • This release includes the Oracle Sun ZFS Storage.* product in the
Configuration for Oracle ZFS multipath.conf file, which includes the ZFS Storage 7350 and
Storage Appliance ZFS Storage 7330 products.
• The default value for the multipath configuration parameter

no_path_retry is updated to 180. This new default setting
enhances the performance of the multipath daemon, multipathd,
and improves response times when issuing the multipath -ll
command.

Oracle VM Manager Performance Enhancements
• Improved Job completion performance: Reduction in the time taken to complete certain jobs, for
example cloning a virtual machine or template.
• Improved Storage refresh performance: Rescanning physical disks is enhanced to ensure that
local storage on an Oracle VM Server is refreshed in a timely manner.
Improved Performance This release improves Oracle VM performance when there are multiple
With Multiple Concurrent concurrent connections to the Oracle VM Manager Command Line
Connections to the Oracle Interface.
VM Manager Command Line
Interface
Usability
Password Modification for the MySQL root user
Oracle VM now lets you change the password for the MySQL root user that the Oracle VM Manager
Administrator Tool uses to connect to the MySQL database instance. See Changing the Password for
the MySQL Root User in the Oracle VM Administrator's Guide.
Documentation
The following changes apply to the Oracle VM Release 3.4.3 documentation library:
• The Oracle VM Manager Online Help has been updated in the Oracle VM Manager Web Interface.
• CentOS 7 is added to the list of supported guest operating systems in the Oracle VM Release Notes.
See Chapter 5, Supported Guest Operating Systems.
• The Oracle VM Installation and Upgrade Guide has been corrected and no longer includes a statement
that you cannot boot Oracle VM Server from SAN.
16
Security
Security
• Oracle MySQL patch update: This release of Oracle VM includes the January 2017 Critical Patch
• Oracle WebLogic patch update: This release of Oracle VM includes the January 2017 Critical Patch
• Oracle Java patch update: This release of Oracle VM includes the January 2017 Critical Patch Update
for Java. (23087165).
• XSA-184 (CVE-2016-5403)
• XSA-190 (CVE-2016-7777)
• XSA-191 (CVE-2016-9386)
• XSA-192 (CVE-2016-9382)
• XSA-193 (CVE-2016-9385)
• XSA-195 (CVE-2016-9383)
• XSA-197 (CVE-2016-9381)
• XSA-198 (CVE-2016-9379, CVE-2016-9380)
• XSA-199 (CVE-2016-9637)
• XSA-200 (CVE-2016-9932)
• XSA-202 (CVE-2016-10024)
• XSA-204 (CVE-2016-10013)
• XSA-206 (no CVE yet assigned)
• XSA-207 (no CVE yet assigned)
• XSA-208 (CVE-2017-2615)
• XSA-209 (CVE-2017-2620)
• XSA-211 (CVE-2016-9603)
• XSA-212 (CVE-2017-7228)
• XSA-213 (CVE-2017-8903)
• XSA-214 (CVE-2017-8904)
• XSA-215 (CVE-2017-8905)

17

Oracle VM Manager support As of Oracle VM Release 3.4.2, Oracle VM Manager supports current
for previous Oracle VM Server and previous Oracle VM Server releases. For more information, see
releases Chapter 6, Oracle VM Manager Support for Previous Oracle VM Server
Releases.
Infrastructure
Support for NVM Express Oracle VM Server now discovers NVMe devices and presents them to
(NVMe) devices Oracle VM Manager, where the NVMe device is available as a local
disk that you can use to store virtual machine disks or create storage
repositories.
The following rules apply to NVMe devices:
Oracle VM Server for x86 • To use the entire NVMe device

as a storage repository or for a
single virtual machine physical
disk, you should not partition the
NVMe device.
• To provision the NVMe device

into multiple physical disks, you
should partition it on the Oracle
VM Server where the device
is installed. If an NVMe device
is partitioned then Oracle VM
Manager displays each partition
as a physical disk, not the entire
device.
You must partition the NVMe

device outside of the Oracle VM
environment. Oracle VM Manager
does not provide any facility for
partitioning NVMe devices.
• NVMe devices can be discovered

if no partitions exist on the device.
• If Oracle VM Server is installed on

an NVMe device, then Oracle VM
Server does not discover any other
partitions on that NVMe device.
Oracle VM Server for SPARC • Oracle VM Manager does not

display individual partitions on an
NVMe device but only a single
device.
Oracle recommends that you

create a storage repository on
the NVMe device if you are using
Oracle VM Server for SPARC. You
18
Infrastructure
can then create as many virtual

disks as required in the storage
repository. However, if you plan
to create logical storage volumes
for virtual machine disks, you must
manually create ZFS volumes on
the NVMe device. See Creating
ZFS Volumes on NVMe Devices
in the Oracle VM Administrator's
Guide.
Using Oracle Ksplice to update Oracle Ksplice capabilities are now available that allow you to update
the dom0 kernel the dom0 kernel for Oracle VM Server without requiring a reboot. Your
systems remain up to date with their OS vulnerability patches and
downtime is minimized. A Ksplice update takes effect immediately when
it is applied. It is not an on-disk change that only takes effect after a
subsequent reboot.
Note
This does not impact the underlying Xen

hypervisor.
Depending on your level of support, contact your Oracle support

representative for assistance before using Oracle Ksplice to update
the dom0 kernel for Oracle VM Server. For more information, see
Oracle VM: Using Ksplice Uptrack Document ID 2115501.1, on My
Oracle Support at: https://support.oracle.com/oip/faces/secure/km/
DocumentDisplay.jspx?id=2115501.1.
Extended SCSI functionality Oracle VM now provides additional support for SCSI functionality to
available for virtual machines virtual machines:
• Linux guests can now retrieve vital product data (VPD) page 0x84
information from physical disks if the device itself makes it available.
• Microsoft Windows Server guests can use SCSI-3 persistent

reservation to form a Microsoft Failover Cluster in an upcoming
Oracle VM Paravirtual Drivers for Microsoft Windows release. See the
Oracle VM Paravirtual Drivers for Microsoft Windows documentation
for information about the availability of failover cluster capabilities on
specific Microsoft Operating System versions.
Dom0 kernel upgraded The dom0 kernel for Oracle VM Server is updated to Oracle
Unbreakable Enterprise Kernel Release 4 Quarterly Update 2 in this
release.
Package additions and updates • The ovmport-1.0-1.el6.4.src.rpm package is added to the

Oracle VM Server ISO to support Microsoft Clustering and enable
communication between Dom0 and DomU processes using the
libxenstore API.
• The Perl package is updated to

perl-5.10.1-141.el6_7.1.src.rpm.
19
• The Netscape Portable Runtime (NSPR) package is updated to

nspr-4.11.0-1.el6.x86_64.rpm.
• The openSCAP package is updated to

openscap-1.2.8-2.0.1.el6.rpm.
• The Linux-firmware package is updated to linux-

firmware-20160616-44.git43e96a1e.0.12.el6.src.rpm.

Oracle VM Manager This release enhances the performance of Oracle VM Manager by
performance enhancements reducing the number of non-critical events that Oracle VM Server sends
to Oracle VM Manager when a system goes down.
Note
If you are running a large Oracle VM environment, it is recommended to increase

the amount of memory allocated to the Oracle WebLogic Server. This ensures
that adequate memory is available when required. See Increasing the Memory
Allocated to Oracle WebLogic Server in the Oracle VM Administrator's Guide for
more information.
Oracle VM Server for x86 For information on performance optimization goals and techniques for
performance optimization Oracle VM Server for x86, see Optimizing Oracle VM Server for x86
Performance, on Oracle Technology Network at: http://www.oracle.com/
technetwork/server-storage/vm/ovm-performance-2995164.pdf.
Xen 4.4.4 performance and • Improved memory allocation: Host system performance is
scalability updates improved by releasing memory more efficiently when tearing down
domains, for example, migrating a virtual machine from one Oracle
VM Server to another or deleting a virtual machine. This ensures that
the host system can manage other guest systems more effectively
without experiencing issues with performance.
• Improved aggregate performance: Oracle VM Server now uses

ticket locks for spinlocks, which improves aggregate performance on
large scale machines with more than four sockets.
• Improved performance for Windows and Solaris guests: Microsoft

Windows and Oracle Solaris guests with the HVM or PVHVM domain
type can now specify local APIC vectors to use as upcall notifications
for specific vCPUs. As a result, the guests can more efficiently bind
event channels to vCPUs.
• Improved workload performance: Changes to the Linux scheduler

ensure that workload performance is optimized in this release.
• Improved grant locking: Xen-netback multi-queue improvements

take advantage of the grant locking enhancements that are now
available in Oracle VM Server Release 3.4.2.
• Guest disk I/O performance improvements: Block scalability is

improved through the implementation of the Xen block multi-queue
layer.
20
Usability
Usability
Oracle VM Manager Rule for Live Migration
To prevent failure of live migration, and subsequent issues with the virtual machine environment, a rule
has been added to Oracle VM Manager, as follows:
Oracle VM Manager does not allow you to perform a live migration of a virtual machine to or from any
instance of Oracle VM Server with a Xen release earlier than xen-4.3.0-55.el6.22.18. This rule
applies to any guest OS.
Table 3.1 Live Migration Paths between Oracle VM Server Releases using Oracle VM Manager
Release 3.4.2
Using Oracle VM Live Migrate To:
Manager Release Release Release Release Release Release Release Release Release
3.4.2 3.2.10 3.2.11 3.3.1 3.3.2 3.3.3 3.3.4 3.4.1 3.4.2
Live Release Yes Yes Depends Depends Yes Yes Yes Yes
Migrate 3.2.10 on Xen on Xen
From: release release
Release Yes Yes Depends Depends Yes Yes Yes Yes
3.2.11 on Xen on Xen
release release
Release No No Depends Depends Depends Depends Depends Depends
3.3.1 on Xen on Xen on Xen on Xen on Xen on Xen
release release release release release release
Release No No Depends Depends Depends Depends Depends Depends
3.3.2 on Xen on Xen on Xen on Xen on Xen on Xen
release release release release release release
Release No No Depends Depends Yes Yes Yes Yes
3.3.3 on Xen on Xen
release release
Release No No Depends Depends Yes Yes Yes Yes
3.3.4 on Xen on Xen
release release
Release No No No No No No Yes Yes
3.4.1
Release No No No No No No Yes Yes
3.4.2
Xen Release (from) Xen Release (to) Live Migration Available?

xen-4.3.0-55.el6.x86_64 xen-4.3.0-55.el6.0.17.x86_64 No
xen-4.3.0-55.el6.22.18.x86_64 and newer xen-4.3.0-55 Yes
For example, as a result of this live migration rule, all virtual machines in an Oracle VM server pool
running Oracle VM Server Release 3.3.2 with Xen version xen-4.3.0-55.el6.22.9.x86_64 must
be stopped before migrating to Oracle VM Server Release 3.4.2.
Tip
Run the following command on Oracle VM Server to find the Xen version:
21
Security
# rpm -qa | grep "xen"
PVHVM hot memory modification
As of this release, it is possible to modify the memory allocated to running PVHVM guests without a
reboot. Additionally, Oracle VM Manager now allows you to set the allocated memory to a value that is
different to the maximum memory available.
Note
• Hot memory modification is supported on x86-based PVHVM guests running

on Linux OS and guests running on Oracle VM Server for SPARC. For x86-
based PVHVM guests running on Oracle Solaris OS, you cannot change the
memory if the virtual machine is running.
• See the Oracle VM Paravirtual Drivers for Microsoft Windows documentation

for information about the availability of hot memory modification on PVHVM
guests that are running a Microsoft Windows OS. You must use a Windows
PV Driver that supports hot memory modification or you must stop the guest
before you modify the memory.
• Oracle VM supports hot memory modification through Oracle VM Manager

only. If you have manually created unsupported configurations, such as
device passthrough, hot memory modification is not supported.
Security
• Oracle MySQL patch update: This release of Oracle VM includes the July 2016 Critical Patch Update
for MySQL. (23087189)
• Oracle WebLogic patch update: This release of Oracle VM includes the July 2016 Critical Patch
• Oracle Java patch update: This release of Oracle VM includes the July 2016 Critical Patch Update for
Java. (23087198).
• XSA-154 (CVE-2016-2270)
• XSA-170 (CVE-2016-2271)
• XSA-172 (CVE-2016-3158 and CVE-2016-3159)
• XSA-173 (CVE-2016-3960)
• XSA-175 (CVE-2016-4962)
• XSA-176 (CVE-2016-4480)
• XSA-178 (CVE-2016-4963)
• XSA-179 (CVE-2016-3710 and CVE-2016-3712)
• XSA-180 (CVE-2014-3672)
• XSA-182 (CVE-2016-6258)
22
• XSA-185 (CVE-2016-7092)
• XSA-187 (CVE-2016-7094)
• XSA-188 (CVE-2016-7154)


Upgrading to Release 3.4 Oracle VM provides scripts that automate the upgrade process and
minimize downtime for your virtualization infrastructure.
Upgrading Oracle VM Manager Use the runInstaller.sh script

to Release 3.4 that is included with the Release 3.4
installation media. See Upgrading
Oracle VM Manager in the Oracle
VM Installation and Upgrade Guide
for more information.
Upgrading Oracle VM Server Upgrade server pools and multiple

from Release 3.3.x Oracle VM Servers directly through
the Oracle VM Manager Web
Interface. The Oracle VM Manager
Web Interface provides an intuitive
interface to perform upgrades either
individually or across multiple servers
at once in batch mode.
• See Upgrading Oracle VM Server

for x86 from Release 3.3.x or
Between 3.4.x Errata Releases
in the Oracle VM Installation
and Upgrade Guide for more
information on upgrading from
Oracle VM Server Release 3.3.x.
• See Update Server and Server

Update Groups in the Oracle VM
Manager User's Guide for more
the Oracle VM Manager Web
Interface.
Upgrading Oracle VM Server Use the UpgradeServers.py script

from Release 3.2.10 for Oracle VM Server for x86 or the
./upgrade script for Oracle VM
Server for SPARC
• See Upgrading Oracle VM Server

for x86 from Release 3.2.10 or
later in the Oracle VM Installation
23
Infrastructure
and Upgrade Guide for more

Oracle VM Server Release 3.2.10.
• See Upgrading Oracle VM Agent

for SPARC in the Oracle VM
Manager User's Guide for more
information on upgrading Oracle
VM Server for SPARC.
Local disk partitioning Interactive installations of Oracle VM Server allow you to configure disk
partitioning. See Installing Oracle VM Server From a DVD-ROM in the
Oracle VM Installation and Upgrade Guide for more information.
Enabling Kdump during Oracle During installation of Oracle VM Server, you can now choose to enable
VM Server installation the Kdump service that captures a memory dump from dom0 and stores
it on the filesystem to help you debug and diagnose issues in the event
of a system crash.
• See Installing Oracle VM Server From a DVD-ROM in the Oracle VM

Installation and Upgrade Guide for information on enabling Kdump.
• See Manually Configuring kdump for Oracle VM Server in the Oracle

VM Administrator's Guide for information on configuring Kdump after
installation.
Infrastructure
Support for Oracle VM Virtual Oracle VM Manager now provides the ability to import and export
Appliances Oracle VM Virtual Appliances as a single .ova (Open Virtualization
Format Archive) file or a set of .ovf (Open Virtualization Format)
and .img (disk image) files. See How are Virtual Appliances Managed?
in the Oracle VM Concepts Guide for more information on virtual
appliances.
Note
In previous releases of Oracle VM, Oracle

VM Virtual Appliances were referred to as
assemblies.
Automated installation of VNC The Oracle VM Manager installer also manages the installation and
and Serial Console software upgrading of the VNC and Serial Console software package on the
Oracle VM Manager host. Reducing administrative overhead during a
deployment of the environment.
Storage live migration You can now perform live migrations of running virtual machines that
have virtual disks on local storage. Oracle VM uses features built into
the OCFS2 file system on x86 platforms to provide this live migration
capability that helps you achieve nearly uninterrupted uptime for virtual
machines.
Some restrictions apply to storage live migration. In particular, there are

various requirements surrounding disk space on the source and target
repositories. See How Can a Virtual Machine be Moved or Migrated? in
the Oracle VM Concepts Guide for more information.
24
Infrastructure
Additionally, performing storage live migration can disrupt the cluster

heartbeat function if the server pool file system is not separate to the
cluster heartbeat file system. Additionally, you should ensure that you
configure separate channels for live migration network traffic and other
network functions such as cluster heartbeat. For more information
about storage configuration guidelines, see Are there Guidelines for
Configuring Storage? in the Oracle VM Concepts Guide. For more
information about network channels, see How are Network Functions
Separated in Oracle VM? in the Oracle VM Concepts Guide.
User interface enhancements As of this release, when editing virtual disks, Oracle VM Manager now
for virtual disk allocation displays the allocation type that was specified when the virtual disk was
created. Additionally, tooltips are available in the Oracle VM Manager
Web Interface to provide more information about how virtual disks
are created and how subsequent virtual disk space is allocated. See
Create Virtual Machine in the Oracle VM Manager User's Guide for
more information on creating virtual machines and virtual disk allocation.
Fiber Channel over Ethernet Oracle VM provides support for installing Oracle VM Server into FCoE
(FCoE) support Storage Area Networks (SAN) over some Host Bus Adapters (HBA) or
Converged Network Adapters (CNA). See Installing Oracle VM Server
to Multipath Storage in the Oracle VM Installation and Upgrade Guide
for more information.
Booting from UEFI Oracle VM Server can now boot from systems that use Unified
Extensible Firmware Interface (UEFI). See Installing Oracle VM Server
From a DVD-ROM in the Oracle VM Installation and Upgrade Guide for
more information about installing Oracle VM Server in UEFI mode.
You can install Oracle VM Server in legacy BIOS mode or UEFI mode.
However, you cannot change modes after installation. For example, if
you install Oracle VM Server in legacy BIOS mode, you cannot then
switch to UEFI mode. If you want to change from legacy BIOS mode
to UEFI mode, or from UEFI mode to legacy BIOS mode, you must re-
install Oracle VM Server.
The following restrictions currently apply to UEFI mode:
• You cannot create custom partition layouts if you are installing Oracle
VM Server in UEFI mode.
• You cannot boot Oracle VM Server from FCoE or iSCSI if you use
UEFI mode.
SOAP API deprecated The Oracle VM SOAP API is deprecated as of Release 3.4.1.
Oracle VM Utilities use Oracle The Oracle VM Utilities version 2.1 now communicate directly with
VM Web Services API Oracle VM Manager using a Oracle VM API. This change improves
performance and usability of the Oracle VM Utilities. Additionally, in
this release, a number of the Oracle VM Utilities scripts have been
deprecated by the Oracle VM Manager Command Line Interface. For
more information, see Using the Oracle VM Utilities in the Oracle VM
25
P2V utility on Oracle VM Server This release includes the P2V utility on the Oracle VM Server ISO
ISO file file. You can use the P2V utility to convert physical hosts to virtual
machines. For more information, see Converting Physical Hosts to
Virtual Machines in the Oracle VM Administrator's Guide.
OSWatcher Utility Available on As of this release, the OSWatcher utility is installed on Oracle VM
Oracle VM Server Server by default and is enabled to run at boot. OSWatcher (oswbb)
is a collection of shell scripts that collect and archive operating system
and network metrics to diagnose performance issues with Oracle VM
Server. For more information, see Working with the OSWatcher Utility
on Oracle VM Server in the Oracle VM Administrator's Guide.
Repository apparent size Oracle VM Manager now displays the apparent size, in GiB, of
repositories. The apparent size is the total size of the entire repository.
For more information, see Repositories Perspective in the Oracle VM
dom0 kernel upgraded The dom0 kernel for Oracle VM Server is updated to Oracle
Unbreakable Enterprise Kernel Release 4 in this release.

Increased supported limits Oracle VM supports increased configuration limits, including a maximum
of 256 virtual CPUs (vCPU) for virtual machines of PVM domain type.
See Chapter 7, Configuration Limits for Release 3.4 for a complete list
of configuration limits for Oracle VM.
Improved performance This release of Oracle VM includes several enhancements to overall

performance and scalability, including the time it takes to discover a
large number of servers.
The following table highlights performance improvements for the Oracle

VM Manager Web Interface from Release 3.3.x to Release 3.4.1:
Action in the Oracle VM Manager Web First time Subsequent

Interface times
Logging in 85% 80%
Switching from Status Overview to 23% 1 second
Statistics on the Health tab faster
response
time
Expanding the Server Pools folder on the 66% 0 seconds
Servers and VMs tab faster
response
time
Switching from the Servers and VMs tab to 62% 73% faster
the Health tab faster response
response time
time
26
Security
Security
Improved character handling for Improvements to Oracle VM Manager allow for better handling of
filters characters used in filter fields to improve matching capabilities and to
provide improved protection against attempted SQL injection attacks.
Improved handling of user This release of Oracle VM includes changes to how user passwords
passwords are stored on the system so that they are not exposed on the command
line.
FIPS 140-2 Validation This release supports enabling FIPS mode for OpenSSL to be
compliant with Federal Information Processing Standard (FIPS)
Publication 140-2. For more information about FIPS and Oracle VM
security, see the Oracle VM Security Guide.
Information on enabling FIPS mode for OpenSSL is provided in the

Oracle Linux 6 Security Guide, available at: http://docs.oracle.com/cd/
E37670_01/
Usability and Serviceability

Device mappings Virtual machine configuration details under the Servers and VMs tab
in the Oracle VM Manager Web Interface display device mappings that
allow you to easily identify which physical resources, such as disks in
the repository, correspond to virtual resources, such as virtual disks
assigned to virtual machines. See Virtual Machines Perspective in the
Oracle VM Manager User's Guide for more information.
Object topology view You can view graphical representations, and generate reports, of virtual
machine object nodes and attributes to quickly locate resources and
view information about those resources. See Display VM Hierarchy
Viewer in the Oracle VM Manager User's Guide for more information.
Context sensitive help Online help for Oracle VM now launches directly from elements in the
Oracle VM Manager Web Interface to the relevant help topics. This
online help system eliminates the need to navigate through help topics
to find information. See Help Icon in the Oracle VM Manager User's
Guide for more information.
User preferences Oracle VM Manager stores certain user preferences across sessions.
See User Preference Persistence in the Oracle VM Manager User's
Guide for more information about user preferences.
Simple names for repository Oracle VM Manager persists simple names for repository objects
objects as metadata. As a result, the simple names are retained when the
repository is transferred to a different instance of Oracle VM Manager.
Likewise, the metadata allows you to easily recover the simple names
in cases where Oracle VM Manager is manually restored without a
database backup. For more information, see How is Object Metadata
Stored in a Repository? in the Oracle VM Concepts Guide.
Generating XML reports Oracle VM Manager lets you generate XML reports on objects, the
object attributes, and direct subobjects. You can generate reports for
virtual machines, Oracle VM Servers, server pools, and storage. For
more information, see Reports in the Oracle VM Manager User's Guide.
27
Configuring database backups The Preferences tab in the Oracle VM Manager Web Interface lets
you set the interval for backing up the MySQL database and number of
backups to keep. For more information, see Preferences in the Oracle
VM Manager User's Guide.
Listing the locations of virtual Oracle VM Manager provides detailed information on the location of
machine disks virtual machine disks to facilitate backup tasks.
• See Virtual Machines Perspective in the Oracle VM Manager User's

Guide for more information about locating virtual machine disks in the
Oracle VM Manager Web Interface.
• See the Oracle VM Manager Command Line Interface User's Guide

for more information about various commands that return attributes
for the location of virtual machine disks.
Monitoring Oracle VM Server This release provides an SNMP shared object module that lets you
through SNMP retrieve details about Oracle VM Server, monitor Oracle VM Server
health, and return a list of running virtual machines. See Monitoring
Oracle VM Server with SNMP in the Oracle VM Administrator's Guide
for more information on the Oracle VM Server shared object module.
Note
The Oracle VM Server object module applies to

x86 systems only. This object module does not
apply to Oracle VM Server for SPARC.
Viewing virtual machine Oracle VM lets you easily retrieve the configuration files for virtual
configuration files machines (vm.cfg).
• See View Virtual Machine Configuration File in the Oracle VM

Manager User's Guide for more information on viewing a virtual
machine configuration file in the Oracle VM Manager Web Interface.
• See getVmCfgFileContent in the Oracle VM Manager Command

Line Interface User's Guide for more information on viewing a virtual
machine configuration file in the Oracle VM Manager Command Line
Interface.
Avoiding multiple physical disk Oracle VM provides detailed information about how physical disks are in
allocation use to avoid multiple physical disk allocation.
• See Physical Disks Perspective in the Oracle VM Manager User's

Guide for more information on working with physical disks.
• See Local Storage in the Oracle VM Concepts Guide for more

information about local storage and physical disks.
Virtual IP addresses for server The field to specify a virtual IP address (VIP) while creating a server
pools pool is deprecated in this release but available for backwards
compatibility.
• See Create Server Pool in the Oracle VM Manager User's Guide for
information on creating a server pool.
28
• See What is a Master Server and a Virtual IP Address? in the Oracle

VM Concepts Guide for more details on why VIPs are deprecated for
server pools in this release.

Oracle VM Release 3.3.5 includes separate patches for Oracle VM Manager, Oracle VM Server, and
Oracle VM Agent for SPARC as follows:
• Oracle VM Manager: patch ID 20492250.
• Oracle VM Server: patch ID 20492240.
• Oracle VM Agent for SPARC: patch ID 20492222.
Download the patches from My Oracle Support.
Performance
Oracle VM Manager performance enhancements
• This release enhances the performance of Oracle VM Manager by reducing the number of non-
critical events that are generated and stored in Oracle VM Manager, for example, server discover
scan and PortUp and PortDown events. (22894434 and 22894398)
• Support added for Microsoft Internet Explorer 11, ensuring that users can now access the Oracle VM
Manager Web Interface using this browser. (22163132)
Infrastructure
• Update to the dom0 Kernel: Updates the dom0 kernel to a newer Unbreakable Enterprise Kernel
Release 3 3.8.13-118.15.1.el6uek.x86_64.rpm.
• Package and library updates: The following changes apply to this release of Oracle VM:
• The OCFS2 package is updated to ocfs2-tools-1.8.6-5.el6.x86_64.rpm.
• The openSCAP package is updated to openscap-1.2.8-2.0.1.el6.rpm.
• The Netscape Portable Runtime (NSPR) package is updated to nspr-4.11.0-1.el6.x86_64.rpm.
• The Network Security Services (NSS) package is updated to

nss-3.21.3-2.0.1.el6_8.x86_64.rpm.
• The tzdata package is updated to tzdata-2016g-2.el6.noarch.rpm.
• The Xen package is updated to xen-4.3.0-55.el6.186.6.x86_64.rpm.
• The VMPInfo3 package is updated to vmpinfo3-sosreport-1.0.0-11.el6.2.1.noarch.rpm.
Security
• Oracle MySQL patch update: This release of Oracle VM includes the October 2016 Critical Patch
29
Oracle VM Security Advisories
• Oracle WebLogic patch update: This release of Oracle VM includes the October 2016 Critical Patch
• Oracle Java patch update: This release of Oracle VM includes the October 2016 Critical Patch Update
for Java. (23087180)

This release includes the following Oracle VM Security Advisories:
Table 3.2 Oracle VM Security Advisories
Advisory Identifier Severity Description
OVMSA-2016-0031 Important Oracle VM 3.3 openssl security update
OVMSA-2016-0034 Critical Oracle VM 3.3 nss-util security update
OVMSA-2016-0035 Moderate Oracle VM 3.3 libssh2 security update
OVMSA-2016-0036 Important Oracle VM 3.3 bind security update
OVMSA-2016-0039 Moderate Oracle VM 3.3 krb5 security update
OVMSA-2016-0040 Moderate Oracle VM 3.3 foomatic security update
OVMSA-2016-0042 Moderate Oracle VM 3.3 nss nss-util nspr security update
OVMSA-2016-0046 Moderate Oracle VM 3.3 kernel-uek security update
OVMSA-2016-0048 Moderate Oracle VM 3.3 openssh security update
OVMSA-2016-0050 Moderate Oracle VM 3.3 file security update
OVMSA-2016-0053 Important Oracle VM 3.3 kernel-uek security update
OVMSA-2016-0082 Moderate Oracle VM 3.3 ntp security update
OVMSA-2016-0087 Important Oracle VM 3.3 libxml2 security update
OVMSA-2016-0089 Important Oracle VM 3.3 xen security update
OVMSA-2016-0093 Important Oracle VM 3.3 libtiff security update
OVMSA-2016-0095 Important Oracle VM 3.3 Unbreakable Enterprise kernel
security update
security update
OVMSA-2016-0099 Moderate Oracle VM 3.3 python security update
security update
security and bugfix update
security update
30

OVMSA-2016-0151 Important Oracle VM 3.3 ovm-consoled security update
security update
OVMSA-2016-0156 Moderate Oracle VM 3.3 libgcrypt security update
OVMSA-2016-0157 Important Oracle VM 3.3 policycoreutils security update
OVMSA-2016-0159 Moderate Oracle VM 3.3 nss and nss-util security update
security update
OVMSA-2016-0168 Moderate Oracle VM 3.3 expat security update
OVMSA-2016-0170 Moderate Oracle VM 3.3 sudo security update
security update

Infrastructure
• Oracle Unbreakable Enterprise Kernel (UEK) update: This release of Oracle VM includes UEK
Release 3 Quarterly Update 7 kernel-uek-3.8.13-118.
• Update to netfront and netback drivers: Along with UEK Release 3 Quarterly Update 7, this release of
Oracle VM delivers updates to the netfront and netback drivers.
• Package and library updates: The following changes apply to this release of Oracle VM:
• The udev RPM file is updated in this release.
• The libxml2 RPM file is updated in this release.
• The libxml2-python RPM file is updated in this release.
• The UEK3 QU7 RPM file is included in this release.
31
• Updates to the irqbalance package: This release updates the irqbalance package to
irqbalance-1.0.9-2 so that interrupts are now better balanced across available dom0 CPUs to
improve network I/O performance.
• Multipath configuration for Oracle ZFS Appliance: This release includes the Oracle Sun ZFS Storage
7330 in the multipath.conf file.

• Compatibility Fix for Different Release Versions of Oracle VM Server During Upgrade: This release
includes changes to facilitate the upgrade of different versions of Oracle VM Server.
Security
• FIPS-Compliant OpenSSL Library Supported for Oracle VM Server: As of this release, it is possible
to install and configure the FIPS-compliant OpenSSL library on Oracle VM Server as per the instructions
provided in the Oracle Linux 6 Security Guide at:
http://docs.oracle.com/cd/E37670_01/
If you are following the instructions provided in the Oracle Linux 6 Security Guide, there is a step where
you enable FIPS in the kernel by editing /etc/grub.conf and adding the fips=1 option to the 'kernel'
line. For this to work on an Oracle VM Server, the fips=1 option must be added to the 'module' line
instead.
• Critical patch updates: This release of Oracle VM includes security fixes from critical patch updates for
Oracle WebLogic Server, Oracle Java 7, and Oracle MySQL.
• Ciphersuite update: The ciphersuite selection configuration is updated in this release of Oracle VM to
support a higher level of security.


security update
OVMSA-2016-0013 Critical Oracle VM 3.3 glibc security update
OVMSA-2016-0011 Moderate Oracle VM 3.3 sos security update
OVMSA-2016-0009 Moderate Oracle VM 3.3 bind security update
OVMSA-2016-0006 Important Oracle VM 3.3 ntp security update
OVMSA-2016-0004 Moderate Oracle VM 3.3 gnutls security update
OVMSA-2016-0003 Moderate Oracle VM 3.3 nss security update
OVMSA-2016-0002 Moderate Oracle VM 3.3 rpcbind security update
OVMSA-2016-0001 Moderate Oracle VM 3.3 openssl security update
32

OVMSA-2015-0153 Moderate Oracle VM 3.3 libpng security update
OVMSA-2015-0152 Moderate Oracle VM 3.3 libxml2 security update
OVMSA-2015-0147 Important Oracle VM 3.3 kernel-uek security and bugfix update
OVMSA-2015-0145 Critical Oracle VM 3.3 nss, nss-util, and nspr security
update
OVMSA-2015-0123 Important Oracle VM 3.3 openldap security update
OVMSA-2015-0120 Important Oracle VM 3.3 libXfont security update
OVMSA-2015-0118 Moderate Oracle VM 3.3 nss-softokn security update
OVMSA-2015-0117 Moderate Oracle VM 3.3 pam security update
OVMSA-2015-0116 Moderate Oracle VM 3.3 net-snmp security update
OVMSA-2015-0115 Moderate Oracle VM 3.3 sqlite security update
OVMSA-2015-0113 Low Oracle VM 3.3 kernel-uek security update
OVMSA-2015-0107 Moderate Oracle VM 3.3 curl security update
OVMSA-2015-0106 Important Oracle VM 3.3 libuser security update
OVMSA-2015-0103 Moderate Oracle VM 3.3 sudo security update
OVMSA-2015-0102 Moderate Oracle VM 3.3 ntp security update
OVMSA-2015-0101 Moderate Oracle VM 3.3 gnutls security update
OVMSA-2015-0100 Moderate Oracle VM 3.3 grep security update
OVMSA-2015-0099 Moderate Oracle VM 3.3 net-snmp security update
OVMSA-2015-0098 Moderate Oracle VM 3.3 python security update

33
Infrastructure
Infrastructure
• Support for Fibre Channel over Ethernet (FCoE): Oracle VM now includes drivers to detect
Converged Network Adapters (CNA). These drivers make it possible to install Oracle VM Server into an
FCoE SAN. (20140781)
• Maximum vCPU limit: The maximum vCPU limit of 128 for Oracle VM Server for SPARC is removed in
this release. (20576711)
• Support of Converged Network Adapters: The Oracle VM Server installer is updated in this release to
support more Converged Network Adapters (CNA) such as HP FlexFabric 10Gb 2-port 536FLB Adapter,
Broadcom 57840S CNA, etc. (20492419)
• Updated hwdata package: The hwdata package has been updated to

hwdata-0.233-11.1.el6.noarch.rpm to list recently released network adapters. (20854084)
• Updated OvmClient.jar library: The corporate signing authority for the OvmClient.jar library has
been updated. (20488470)
• Updated virtual machine console packages: The ovmcore-console-1.0-42.rpm package has

been added to the Oracle VM Manager Web Interface and is updated on the Oracle VM Manager ISO.
(20138989)
• Oracle VM Server dracut packages: This release adds the dracut-fips package and the dracut-
network package to the Oracle VM Server ISO. This release also includes updates to the dracut-004
package and the dracut-kernel package. (20829905)

• Installer check before upgrading: As of this release, the Oracle VM Manager installation program now
checks for sufficient /tmp space before starting an upgrade of Oracle VM. (20347269)
• Delete running jobs: The Oracle VM Manager upgrade script now allows you to delete running jobs so
that the upgrade can proceed. (20103466)
Networking
• Support for TCP-based NFS Repository Mounts: Repositories hosted on an NFS share are mounted
using TCP by default, with the option to failback to UDP, in this release. (14692942)
• Add Python networking package: This release adds the python-

ipaddr-2.1.9-3.el6.noarch.rpm package to Oracle VM Server for improved IPv6 support.
(20855848)
Performance
• Improved navigation performance in the Oracle VM Manager Web Interface: This release provides
improved performance when navigating to VLAN information. (20814204)
34
Security
• Quicker response times in the Oracle VM Manager Web Interface Health tab: This release provides
improved performance when navigating through the Health tab. (20963394)
• Retrieving available servers for virtual machines: This release improves the time it takes to retrieve a
list of available servers for virtual machines. (20982855)
• Improved performance when expanding tree nodes in the Oracle VM Manager Web Interface: This
release provides improved performance when expanding a tree node that contains a large number of
servers. (20305165)
Security
• Oracle MySQL patch update: This release of Oracle VM includes the April 2015 Critical Patch Update
for MySQL. (20916257)
• Oracle WebLogic patch update: This release of Oracle VM includes the April 2015 Critical Patch
Java. (20918735)
• UEK3 quarterly update: This release of Oracle VM includes the UEK3 quarterly update 5. (20594222)
• XSA-136 (CVE-2015-4164)
• XSA-134 (CVE-2015-4163)
• XSA-135 (CVE-2015-3209)


OVMSA-2015-0055 Moderate Oracle VM 3.3 glibc security update
OVMSA-2015-0057 Critical Oracle VM 3.3 Xen security update
OVMSA-2015-0064 Important Oracle VM 3.3 Xen security update
OVMSA-2015-0065 Moderate Oracle VM 3.3 Openssl security update
OVMSA-2015-0067 Important Oracle VM 3.3 Xen security update
OVMSA-2015-0070 Moderate Oracle VM 3.3 Openssl security update
OVMSA-2015-0071 Important Oracle VM 3.3 cups security update
OVMSA-2015-0073 Moderate Oracle VM 3.3 nss security update
35

Performance
• Performance Monitoring: This release adds support for Oracle VM performance monitoring.
(19707131)
• Caching Job States: Oracle VM Manager Web Interface now caches the states of jobs to improve
performance. (19903847)
• CPU Load of the MySQL Process: Several performance improvements have been implemented to
lower the CPU load of the MySQL process. (19563329)
• Looking Up Objects by Name: Oracle VM Manager Web Interface provides improved performance
when looking up an object based on its name. (19482992)
• Method Call Improvement: Improves the performance of the OvmWsClient.getWsUtilities()

Oracle VM Web Services API call. (19402315)
• Virtual Machine Shutdown Time: Virtual machines now shut down faster, especially for virtual
machines with a large amount of memory. (18489484)
Usability
• Expanding Server Lists: Oracle VM Manager Web Interface is now more responsive and quicker when
expanding lists of Oracle VM Servers. (19879474 and 19385050)
• Scrolling through Large Tables: Oracle VM Manager Web Interface provides improved performance
when scrolling through large tables such as the Unassigned Virtual Machines folder. (19879459)
• Searching for Jobs: Oracle VM Manager Web Interface now provides results quicker when searching
for jobs. (19590118)
• Querying Statistics: Oracle VM Manager Web Interface provides improved performance when querying
Oracle VM Manager statistics. (19563481)
• Servers and VMs Tab Displays as Default: The Servers and VMs tab now displays when opening the
Oracle VM Manager Web Interface. (19429440)
• Opening Menu with Right Mouse Button: Oracle VM Manager Web Interface provides improved
performance when opening context menus with the right mouse button. (19402302)
• Prevent VNIC Changes for Running Virtual Machines: Oracle VM now includes a rule to prevent
virtual network interface card (VNIC) changes in the network while virtual machines are running.
(19644535)
36

• Ugrade Support: This release adds support to upgrade from Oracle VM Release 3.2.9 to Oracle VM
Release 3.3.2. (20122857)
• Discover Servers After Upgrade: This release adds support to discover Oracle VM Release 3.2
Servers after upgrading to Oracle VM Release 3.3. (19958455)
• Prevent Oracle VM Manager Upgrade with Running Jobs: Oracle VM now includes a rule to prevent
an upgrade of Oracle VM Manager when jobs are still running (19562031)
Infrastructure
• Updated Virtual Machine Console: This release includes an updated virtual machine console package,
ovmcore-console-1.0-42, to the Oracle VM Manager installation ISO. (20138989)
• Import OVF 2.1 VM Templates: Oracle VM now provides support for importing Oracle VM Templates
that are created according to the OVF 2.1 specification. (19639096)
• Improved NUMA Support: Oracle VM provides improved NUMA support for PCI devices. (20088513)
• Xen Command Support: Adds support for the -p option to the xendomains/auto-start feature of Xen.
(20087455)
• Update to the dom0 Kernel: Updates the dom0 kernel to a newer Oracle Unbreakable Enterprise
Kernel Release 3 3.8.13-55.1.3.el6uek. (20028783)
• Update to OpenSSL Package: This Oracle VM Release includes the latest OpenSSL package.
(19933498)
• Support for Larger Number of Virtual CPUs: This Oracle VM release adds support for a larger number
of virtual CPUs. (19564352)
• Support for an HP Server: Oracle VM now supports installing Oracle VM Server on an HP DL580 G8
server. (19295185)
• Oracle Virtual Networking Package: This Oracle VM release adds the Oracle Virtual Networking user
package, orclovn-user-6.0.r7588-1, to Oracle VM Server. (19159220)
Security

OVMSA-2015-0022 Critical Oracle VM 3.3 glibc security update
OVMSA-2014-0018 Critical Oracle VM 3.3 bash security update
OVMSA-2014-0014 Important Oracle VM 3.3 nss security update
OVMSA-2014-0015 Important Oracle VM 3.3 nss-util security update
OVMSA-2014-0021 Important Oracle VM 3.3 bash security update
37

OVMSA-2014-0017 Important Oracle VM 3.3 glibc security update
OVMSA-2014-0080 Important Oracle VM 3.3 libXfont security update
OVMSA-2015-0036 Important Oracle VM 3.3 freetype security update
OVMSA-2014-0087 Important Oracle VM 3.3 jasper security update
OVMSA-2015-0006 Important Oracle VM 3.3 jasper security update
OVMSA-2014-0083 Important Oracle VM 3.3 rpm security update
OVMSA-2015-0033 Moderate Oracle VM 3.3 bind security update
OVMSA-2015-0037 Moderate Oracle VM 3.3 unzip security update
OVMSA-2014-0086 Moderate Oracle VM 3.3 mailx security update
OVMSA-2014-0036 Moderate Oracle VM 3.3 wget security update
OVMSA-2014-0030 Moderate Oracle VM 3.3 rsyslog security update
OVMSA-2014-0035 Moderate Oracle VM 3.3 cups security update

Programmability
• Fully Supported Web Services API: Oracle VM Manager now exposes a fully supported Oracle VM
Web Services API that offers both SOAP and REST interfaces to program any action supported within
Oracle VM. See the Oracle VM Web Services API Developer's Guide for more information.
Performance
• New Statistics and Events model: The statistics and events model has been entirely rewritten to offer
significant performance gains. A queued job task is in place to monitor the number of generated statistics
and to adjust the threshold automatically during periods where the number of statistics exceeds the
threshold.
38
Security
• Oracle VM Server Notification Thresholding: Oracle VM Server notifications can increase the number
of generated events and jobs impacting on performance and filling log files to make them unusable. A
facility has been provided to control and limit the number of notifications that an Oracle VM Server can
generate by setting notification thresholds.
• Huge Page Support: Support for Huge Pages (or Super Pages) has been added to allow guests,
hosted on an x86-based server pool, to take advantage of this functionality to improve performance and
reduce the I/O that results from page lookups in virtualized environments. See Create Virtual Machine in
the Oracle VM Manager User's Guide for more information on Huge Page support.
• Improvements to Guest VM Messaging: A change to the Oracle VM Guest Additions messaging

facility to support multiple key-value pairs in a single message reduces the number of jobs generated
within Oracle VM Manager, resulting in significant performance gains. See Sending Messages to Virtual
Machines in the Oracle VM Concepts Guide for more information on guest virtual machine messaging.
• Other Code Changes: Various portions of the code-base have been rewritten to enhance performance
in environments that have been scaled up to make use of many disks, storage repositories, Oracle VM
Servers or virtual machines.
Security
• Service Consolidation: The number of required ports open in a deployment, and the mechanisms
that are used for components to communicate have been reduced through the consolidation of various
services and the global use of the Oracle VM Web Services API. These changes reduce the number
of potential attack vectors available to malicious users. See the Oracle VM Security Guide for more
information.
• Certificate-based Authentication: The Oracle VM Agent now uses SSL certificates to authenticate
requests from Oracle VM Manager when an Oracle VM Server is discovered. This reduces the possibility
that a malicious user can perform a brute-force dictionary attack to authenticate against an Oracle
VM Server that is under the ownership of an Oracle VM Manager instance. Furthermore, certificate-
based authentication can be used for all Oracle VM Web Services API requests, to ease automation
while retaining a better security model for authentication. See the Oracle VM Security Guide for more
information on SSL in Oracle VM.

• New Virtual Machine Console: The virtual machine console has been redesigned to use JavaScript
and HTML5 features. There is no longer any requirement to install or run software locally on the client
computer. The new console runs within the web-browser, and only requires that the browser is capable
of supporting the technologies used. Most modern browsers are supported. This change reduces
complexity and provides a more reliable console tool. See Accessing the Virtual Machine Console in the
Oracle VM Concepts Guide for more information on the virtual machine console.
• Virtual Machine Configuration File View: It is now possible to view the virtual machine configuration
file for any virtual machine directly within the Oracle VM Manager Web Interface and Oracle VM
Manager Command Line Interface, to provide more transparency for the configuration that is actually
applied to a virtual machine when it is started by the hypervisor. See View Virtual Machine Configuration
File in the Oracle VM Manager User's Guide for more information on viewing the virtual machine
configuration file.
• Stack Trace Removal: The Oracle VM Manager Command Line Interface no longer has stack trace
information in job error messages. This makes it easier to read the more useful content of error
messages.
39
Reliability
• Job Details Improvements: The Oracle VM Manager Web Interface job details view (displayed by
clicking the Details button in the Job Summary pane) has been improved with more appropriate
information, and stack trace information has been removed. The job stack trace information is still
available, but has been moved to to the Jobs view. See Job Details in the Oracle VM Manager User's
Guide for more information on job details.
Reliability
• Database Consolidation: Only the bundled Oracle MySQL Enterprise database is supported as a
back end repository for the Oracle VM Manager. Removal of support for other Oracle Database types
allows Oracle VM Manager to have more control over regular automated database backup, support for
database consistency checking tools, and other facilities required to improve reliability and performance.
Furthermore, by limiting support to the bundled database, it is possible to improve troubleshooting
documentation and tools.
• Database Object Consistency Checking: Tools are now in place to check the status of objects stored
within the database, along with their relationships and references. These tools can assist in tuning the
database and can help resolve potential database issues. Consistency checks are performed alongside
the automated backup facility.
• Inbound Migration Lock: A new feature allows you to protect an Oracle VM Server from attempts to
move or migrate other virtual machines to that server. This allows you to run selected virtual machines
on a specified Oracle VM Server, and to be certain that no other virtual machines are started on the
server, consuming resources that may be mission critical for some applications. See How Can I Protect
Virtual Machines? in the Oracle VM Concepts Guide for more information.
Networking
• Addition of Network Bridges and Virtual Switches to Model: The Oracle VM Manager core model
has been updated to provide better representation of network bridge and virtual switch objects as they
exist on each Oracle VM Server. This helps to resolve issues where bridges or virtual switches have
been created manually on an Oracle VM Server, and provides the mechanism to develop tools to better
handle bridge and virtual switch configuration. See Understanding Networks in the Oracle VM Concepts
Guide for information on network architecture.
• Improved VLAN Support: VLAN support has been completely restructured. The previous model, which
involved configuring VLAN Groups and VLAN Segments, was inflexible, confusing, and could sometimes
impact on the Management Network. VLAN support has been simplified, and introduces the concept of a
VLAN Interface, allowing you to simply define which ports are used for which VLAN tags. You can define
VLAN Interfaces as you need them and many of the restrictions on using VLANs have been removed.
See How are VLANs Used in Oracle VM? in the Oracle VM Concepts Guide for information on VLANs.
• Added Support for HTTP Proxies: Oracle VM Manager now has added support to define an HTTP
proxy to use when importing an assembly, virtual disk, or virtual CDROM. This change expands on the
ability to define a proxy when importing a template or virtual machine.
SPARC Support
• Support for iSCSI, Fibre Channel, ZFS and Local Disk for Virtual Machine Assignment: iSCSI and
Fibre Channel disks can now be discovered for SPARC systems, and can be directly assigned to virtual
machines running in a SPARC server pool. Configuring storage repositories on these disks is currently
not supported. Local disks, ZFS volumes and NFS exports can be discovered on SPARC systems and
can be used for repositories, or can be assigned for use by any virtual machine running on the same
server.
40
• Package Management and SPARC Upgrades: Added support for package management within
the Oracle VM Agent has made it possible to manage future SPARC server upgrades directly from
Oracle VM Manager. Changes to the upgrade tools within Oracle VM Manager allow you to define
Server Update Groups where you can specify the IPS repository that should be used to perform future
upgrades. See Creating Server Update Repositories in Oracle VM Manager in the Oracle VM Installation
and Upgrade Guide for information on creating Server Update Groups for SPARC.
• Support for HA Virtual Machines: Virtual machines running in a SPARC server pool can now be
configured for high availability if the storage for the server pool is using an NFS file system. See How
does High Availability (HA) Work? in the Oracle VM Concepts Guide for information on high availability.
• Improved Network Support: The following network functionality is now supported on Oracle VM Server
for SPARC systems:
• Active-Backup network bonding.
• VLAN integration.
• Jumbo Frames and MTU configuration on network port and bond configuration.

• Oracle VM Server Installation Partitioning: The Oracle VM Server Installer now handles all disk
partitioning itself, to optimize installation. Part of this process make sure that only the maximum required
disk space for the Oracle VM Server software is used. Any remaining disk space is automatically
partitioned to be used as a discoverable local disk that can be used to host a storage repository, or
attached to a virtual machine hosted on the server. This improvement to disk space usage ensures the
best possible use of machine resources. This change is only supported for locally hosted boot disks and
does not apply to SAN disks.
Documentation
• New Guides and Improved Interface Coverage: The documentation has been restructured to provide
more comprehensive coverage. The Oracle VM Manager User's Guide has been structured to map more
directly onto the Oracle VM Manager Web Interface, to make it easier to find information in the context
of user interface related items. A new guide, the Oracle VM Concepts Guide, has been created to cover
more conceptual information, and to answer many more generic questions about the architecture and
configuration of an Oracle VM deployment. The previously named Oracle VM Utilities Guide has been
replaced with the Oracle VM Administrator's Guide, which provides broader coverage of all items relating
to the underlying administration of an Oracle VM deployment, including handling backups, configuring
SSL certificates and general troubleshooting. A new Oracle VM Web Services API Developer's Guide
has been created to provide some general guidelines, and an introduction to programming against the
Oracle VM Web Services API.
Infrastructure
• Infrastructure Changes in Oracle VM Manager: Much of the technology used to enable Oracle VM
Manager has been updated to take advantage of new features, improved performance and security
fixes. Major changes to these components include:
• Oracle WebLogic Server upgraded to 12c.
• Java upgraded to version 7.
• MySQL Database upgraded to version 5.6.
41
The Oracle VM Manager Web Interface and the Oracle VM Manager Command Line Interface have
been rewritten to use the new Oracle VM Web Services API to provide further consolidation.
• Infrastructure Changes in Oracle VM Server: Major changes to the underlying technology used for
Oracle VM Server on x86 hardware have been implemented, including:
• Xen hypervisor upgraded to version 4.3.
• Dom0 kernel upgraded to Oracle Linux 6.
• Linux kernel (used in dom0) updated to Oracle Unbreakable Enterprise Kernel 3 (UEK3).

The new features and enhancements in Oracle VM Release 3.2 include:
Performance, Scalability and Security

• Support for Oracle VM Server for SPARC: Oracle VM Manager can now be used to discover SPARC
servers running Oracle VM Server for SPARC, and perform virtual machine management tasks.
• New Dom0 Kernel in Oracle VM Server for x86: The Dom0 kernel in Oracle VM Server for x86 has
been updated so that it is now the same Oracle Unbreakable Enterprise Kernel 2 (UEK2) as used
in Oracle Linux, for complete binary compatibility with drivers supported in Oracle Linux. Due to the
specialized nature of the Oracle VM Dom0 environment (as opposed to the more general purpose
Oracle Linux environment) some Linux drivers may not be appropriate to support in the context of
Oracle VM, even if the driver is fully compatible with the UEK2 kernel in Oracle Linux. Do not install any
additional drivers unless directed to do so by Oracle Support Services.
Installation
• MySQL Database Support: MySQL Database is used as the bundled database for the Oracle VM
Manager management repository for simple Installations. Support for an existing Oracle SE/EE
Database is still included within the installer so that you can perform a custom installation to take
advantage of your existing infrastructure. Simple Installation using the bundled MySQL Database is fully
supported within production environments.
• Discontinued inclusion of Oracle XE Databases: Oracle VM Manager no longer bundles the Oracle
XE database as a back end database. If you are currently running Oracle VM Manager using Oracle XE
and you intend to upgrade you must first migrate your database to Oracle SE or Oracle EE.
• Oracle VM Server Support Tools: A meta-package is provided on the Oracle VM Server ISO enabling
you to install packages to assist with support. These packages are not installed automatically as they
are Oracle VM Server does not depend on them. Installation of the meta-package and its dependencies
may assist with the resolution of support queries and can be installed at your own discretion. Note that
the sudo package was previously installed as a dependency for Oracle VM Server, but that this package
has now been made a dependency of the ovs-support-tools meta-package. If you require sudo on
your Oracle VM Server installations, you should install the ovs-support-tools meta-package.
Usability
• Oracle VM Manager Command Line Interface (CLI): The new Oracle VM Manager Command Line
Interface can be used to perform the same functions as the Oracle VM Manager Web Interface, such
as managing all your server pools, servers and guests. The CLI commands can be scripted and run
in conjunction with the Web Interface, thus bringing more flexibility to help you deploy and manage an
42
Usability
Oracle VM environment. The CLI supports public-key authentication, allowing users to write scripts
without embedding passwords, to facilitate secure remote login to Oracle VM Manager. The CLI also
includes a full audit log for all commands executed using the facility. See the Oracle VM Manager
Command Line Interface User's Guide for information on using the CLI.
• Accessibility options: Options to display the UI in a more accessible way for screen readers, improve
the contrast, or increase the font size. See Oracle VM Manager Accessibility Features in the Oracle VM
Manager User's Guide for more information.
• Health tab: Monitor the overall health and status of your virtualization environment and view historical
statistics such as memory and CPU usage. See Health Tab in the Oracle VM Manager User's Guide for
information on using the Health tab.
• Multi-select of objects: Select one or more objects to perform an action on multiple objects, for
example, upgrading multiple Oracle VM Servers in one step, rather than upgrading them individually.
See Multi-Select Functionality in the Oracle VM Manager User's Guide for information on using the multi-
select feature.
• Search for objects: In many of the tab management panes and in some of the dialog boxes you
can search for objects. This is of particular benefit to large deployments with many objects such as
virtual machines or Oracle VM Servers. See Name Filters in the Oracle VM Manager User's Guide for
information on using the search feature.
• Tagging of objects: It is now possible to tag virtual machines, servers and server pool objects within
Oracle VM Manager to create logical groupings of items, making it easier to search for objects by tag.
• Alphabetized tables and other UI listings: Items listed in tables and other UI listings are now
sorted alphabetically within Oracle VM Manager by default, to make it easier to find objects in larger
deployments.
• Present repository to server pools: In addition to presenting a storage repository to individual Oracle
VM Servers, you can now present a repository to all Oracle VM Servers in one or more server pools.
See Present or Unpresent Repository in the Oracle VM Manager User's Guide for more information.
• OCFS2 timeout configuration: An additional attribute has been added to allow you to determine the
timeout in seconds for a cluster when configuring a clustered server pool within Oracle VM Manager.
• NFS refresh servers and access lists for non-uniform exports: For NFS configurations where
different server pools are exposed to different exports, it is now possible to configure non-uniform
exports and access lists to control how server pool refreshes are performed. For more information on
this feature, see Access Groups Perspective in the Oracle VM Manager User's Guide.
• Configure multiple iSCSI access hosts: You can now configure multiple access hosts for iSCSI
storage devices
• Sizes of disks, ISOs and vdisks: Oracle VM Manager now shows the sizes of disks, ISOs and vdisks
within the virtual machine edit dialog, to make it easier to select a disk.
• Automated backups and easy restore: Oracle VM Manager installations taking advantage of the
bundled MySQL Enterprise Edition Database include fully automated database backups and a quick
restore tool that can help with easy database restoration.
• Serial console access: A serial console java applet has been included within Oracle VM Manager to
allow serial console access to virtual machines running on both SPARC and x86 hardware. This facility
complements the existing VNC-based console access to virtual machines running on x86 hardware.
• Set preferences for recurring jobs: Facilities have been provided within Oracle VM Manager to control
the preferences for recurring jobs. These include the ability to enable, disable or set the interval for tasks
43
such as refreshing repositories and file systems; and to control the server update repository checking
task.
• Processor Compatibility Groups: Since virtual machines can only be migrated between servers that
use compatible processor types, Oracle VM Manager now provides the ability to define Processor
Compatibility Groups to enable you to pick which servers a virtual machine can be migrated between.
• Configure additional Utility and Virtual Machine roles: New roles are now supported on Oracle VM
Servers to control the type of functionality that the server will be responsible for. The Virtual Machine role
is required in order for an Oracle VM Server to run a virtual machine. Oracle VM Servers configured with
the Utility role are favoured for performing operations such as file cloning, importing of templates, the
creation of repositories, and other operations not directly related to running a virtual machine.
• Directly import a virtual machine: It is now possible to directly import a virtual machine using Oracle
VM Manager, no longer requiring that you first import to a template and then clone.
• Virtual machine start policy: You can now specify a start policy for a virtual machine, determining
whether to always start the virtual machine on the server on which it has been placed, or to start the
virtual machine on the best possible server in the server pool.
• Hot-add a VNIC to a virtual machine: It is now possible to add a VNIC directly to a running virtual
machine from within Oracle VM Manager.
• Send messages to a virtual machine: Facilities have been provided within Oracle VM Manager to
send messages directly to a virtual machine in the form of key-value pairs.
• NTP configuration: Ensuring that time is synchronized across all servers is important. Oracle VM
Manager now provides a facility to bulk configure NTP across all servers.


• Updated Xen Hypervisor: Xen is updated to Release 4.1.2.
• New Dom0 Kernel in Oracle VM Server for x86: The Dom0 kernel is now the same Oracle
Unbreakable Enterprise Kernel 2 (UEK2) as used in Oracle Linux, for complete binary compatibility with
drivers supported in Oracle Linux. Due to the specialized nature of the Oracle VM Dom0 environment
(as opposed to the more general purpose Oracle Linux environment) some Linux drivers may not be
appropriate to support in the context of Oracle VM, even if the driver is fully compatible with the UEK2
kernel in Oracle Linux. Do not install any additional drivers unless directed to do so by Oracle Support
Services.
• Jumbo Frames Support: Fully supports different MTU sizes. See Create Bond Port in the Oracle VM
Manager User's Guide for information on setting the network MTU size.
• LUN Resizing: A LUN (either used as a storage repository or a server pool file system) also resizes the
OCFS2 file system.
• Backup/Restore Access to OCFS2 Storage Repositories: Present OCFS2 storage repositories as

NFS shares to enable access to external tools in order to back up and copy storage repository contents.
See Repository Exports Perspective in the Oracle VM Manager User's Guide for more information on
enabling back ups of storage repositories.
44
Installation
• Move OCFS2 Repositories Between Server Pools: Remove an OCFS2 storage repository from one
server pool and add it to another. The process of moving a storage repository from one server pool to
another has been streamlined to facilitate easier disaster recovery and more storage agility.
Installation
• Multipath Boot from SAN: Oracle VM Server can be installed to perform boot from multipath SAN
without requiring any type of local storage.
Usability
• Create Virtual Machine Templates: Virtual machines can be cloned as templates, templates can be
used to create other templates, and a template can be created in a similar way as creating a virtual
machine using a wizard. See Clone a Virtual Machine or Template in the Oracle VM Manager User's
Guide for information on creating virtual machine templates.
• Clone Virtual Machines and Templates: Cloning a virtual machine or template (including the
configuration information, disk resources, storage and networking). See Clone a Virtual Machine or
Template in the Oracle VM Manager User's Guide for more information on moving and cloning virtual
machines and templates.
• Hot Add vCPUs: Add virtual CPUs on the fly to a running virtual machine. See Edit Virtual Machine in
the Oracle VM Manager User's Guide for information on editing a virtual machine and adding vCPUs to a
running virtual machine.
• Discover Multiple Oracle VM Servers Using Hostnames and IPs: Discover Oracle VM Servers by
entering or pasting in multiple hostname or IP addresses in a text field, instead of entering each IP
address individually. See Discover Servers in the Oracle VM Manager User's Guide for information on
discovering Oracle VM Servers.
• Virtual Machine Keyboard Mapping: Support for keyboard mapping for different languages for each
individual virtual machine, not just for the server pool. See Create Virtual Machine in the Oracle VM
Manager User's Guide for information on the keyboard mapping when creating a virtual machine.
• Virtual Machine Console: If the a virtual machine console is in use by another user, you can take over
control of the virtual machine console. See Launch Console in the Oracle VM Manager User's Guide for
information on the virtual machine console.
• User Interface Enhancements: Significant user interface enhancements improve ease of use, make
work flows more intuitive, and reduce the amount of clicks required to perform tasks. See Using Oracle
VM Manager in the Oracle VM Manager User's Guide for information on the Oracle VM Manager user
interface.
• Drag and Drop: Objects can be dragged and dropped in the user interface. See Drag and Drop in the
Oracle VM Manager User's Guide for information using the drag and drop feature.


• Anti-Affinity Support: Define which virtual machines cannot reside on the same Oracle VM Servers.
Use this feature to achieve better availability by ensuring that critical resources do not reside on a shared
single point of failure. See Anti-Affinity Groups Perspective in the Oracle VM Manager User's Guide for
information on anti-affinity .
45
Installation
• Change Oracle VM Agent Password: The Oracle VM Agent password for all Oracle VM Servers in a
server pool can be changed from Oracle VM Manager.
Installation
• Maintain Oracle VM Manager Identity After Reinstall: See Installing Oracle VM Manager in the Oracle
VM Installation and Upgrade Guide for information on how to reinstall Oracle VM Manager and maintain
the previous UUID.
Usability
• User Interface: Improved wizards to allow smooth operation and closely match operational needs.
• Virtual Machines: Explicitly set maximum memory when creating virtual machines. Flexibility to update
virtual disk attributes. Choose thick or thin provision. CDROM dynamic update. Virtual machine console
does not require username/password. See Understanding Virtual Machines in the Oracle VM Concepts
Guide for information on these new virtual machine features.
• Live Migration Assistant: During live migration, only allowed target Oracle VM Servers can be selected
in the Live Migration dialog box. An additional section entitled Why don't I see other servers to migrate
to? shows why migrating to a given server is not possible. Anti-affinity and hardware factors such as
CPU family are taken into account.
• Maximum Guest Memory: The new Create Virtual Machine wizard contains a maximum memory
setting. This is the maximum amount of RAM you can configure for the running virtual machine.


• Updated Xen 4.0 Hypervisor: More efficient power management capabilities, broader hardware
support, and better performance, scalability and security for both hardware virtualized and
paravirtualized guests.
• Updated Dom0 Linux Kernel with Newer Drivers: Better hardware support for higher performance,
with the latest Unbreakable Enterprise Kernel.
• Improved Scalability: Capable of supporting Oracle VM Servers with up to 160 CPUs and 2 TB
memory.
• Updated OCFS2 1.8 Cluster File System: Instant clone support in OCFS2 1.8 enables significantly
faster virtual machine provisioning and cloning.
• Support for OVF: Use Oracle VM Manager to import a broad range of Open Virtualization Format
(OVF) based software assemblies produced by Oracle to accelerate application deployment. See How
are Virtual Appliances Managed? in the Oracle VM Concepts Guide for information on working with
assemblies.
Network and Storage Configuration and Management

• Network Configuration and Management: All Oracle VM Server logical network configuration
and management is now performed using Oracle VM Manager, for example, NIC port bonding, and
configuring VLAN Networks. See Understanding Networks in the Oracle VM Concepts Guide for
information on network management in Oracle VM Manager.
46
Physical and Virtual Status and Resource Information
• Storage Configuration and Management: The Oracle VM Storage Connect framework enables Oracle
VM Manager to directly access the resources and functionality of existing storage systems, supporting
native storage services such as SAN or NFS storage creation, deletion, expansion. This allows Oracle
VM Manager to automatically discover available storage and create new storage repositories, or to map
raw storage directly to virtual machines. See Storage Tab in the Oracle VM Manager User's Guide for
information on storage management.
Physical and Virtual Status and Resource Information

• Resource Information: Performance statistics are available for CPU, memory, disk and network for
each physical Oracle VM Server and virtual machine. Events are displayed for each physical and virtual
object, such as port up/down status. IP address and other configuration information is displayed directly
in the user interface.
Note
Not all metrics are exposed through the Oracle VM Manager user interface.
Policy-Based Resource Management

• Distributed Resource Scheduling (DRS) for Capacity Management: DRS provides real-time
monitoring of Oracle VM Server utilization with the goal to rebalance a server pool to provide consistent
resources to the running virtual machines. DRS migrates load away from heavily-loaded Oracle VM
Servers to less-loaded Oracle VM Servers.
• Distributed Power Management (DPM) to Optimize Server Pool for Minimum Power Consumption:
DPM complements DRS to reduce the Oracle VM Servers in a server pool when there are periods of low
resource utilization. DPM can automatically add capacity as needed when resource utilization increases.
See What are Server Pool Policies? in the Oracle VM Concepts Guide for information on using DRS and
DPM.
Usability
• User Interface: Based on the latest Oracle Application Development Framework (ADF), Oracle VM
Manager now includes a fully interactive tree view and automatic refresh to show the real-time state of
the physical and virtual environment. See Using Oracle VM Manager in the Oracle VM Manager User's
Guide for information on using the new user interface.
• Virtual Machines: Specify the boot order (for example: disk, CDROM) to simplify installs. Directly attach
raw storage or virtual disks (vdisks). See Understanding Virtual Machines in the Oracle VM Concepts
Guide for information on virtual machines.
47
48
Chapter 4 Notable Bug Fixes
Table of Contents
4.1 Bug Fixes in Oracle VM 3.4.6.1 .................................................................................................. 49
4.2 Bug Fixes in Oracle VM 3.4.6 ..................................................................................................... 49
4.10 Bug Fixes in Oracle VM 3.3.3 ................................................................................................... 58
Each Oracle VM release includes bug fixes that improve performance, usability, or resolve significant
issues. Because each release contains many bug fixes, it is beyond the scope of this document to provide
an exhaustive list of each bug fix. Rather, this chapter highlights the more notable bug fixes in each
release.
4.1 Bug Fixes in Oracle VM 3.4.6.1

Oracle VM Release 3.4.6.1 includes the notable bugs that have been fixed in previous 3.4.x errata
releases. Additionally, Oracle VM Release 3.4.6.1 includes a number of enhancements, as described in
Section 3.1, “What's New in Oracle VM Release 3.4.6.1?”.
Notable bugs fixed in Oracle VM Release 3.4.6.1 are as follows:
• As of Release 3.4.6, support for Paravirtualized (PVM) guests is removed. In Release 3.4.6.1, Oracle
VM Manager has been enhanced to properly raise warning messages for stopped virtual machines of
the PVM domain type. (28914609)
• The RestoreDatabase.sh command script has been hardened to correctly cleanup data directories
prior to restoring the database from a backup. (29388404)
• The configure_client_cert_login.sh command script has been improved for better error
handling. (29407663)
• An issue has been addressed that would cause some upgrades of Oracle VM Manager to Release
3.4.6 to fail with an "WLSTException: Failed to generate CA certificate and trust store" failure message.
(29457567)
4.2 Bug Fixes in Oracle VM 3.4.6

Oracle VM Release 3.4.6 includes the notable bugs that have been fixed in previous 3.4.x errata releases.
Additionally, Oracle VM Release 3.4.6 includes a number of enhancements, as described in Section 3.2,
“What's New in Oracle VM Release 3.4.6?”.
Notable bugs fixed in Oracle VM Release 3.4.6 are as follows:
49
Bug Fixes in Oracle VM 3.4.5
• Oracle VM Agent for SPARC has been updated to support the removal of the DefaultFixed network
configuration profile (NCP) in Oracle Solaris 11.4. (27838128)
• Issues were addressed that were preventing Oracle VM Server from recognizing resources and PCE-e
segmentation with HPE Superdome Flex. (28504712 and 28506351)
• An additional check has been implemented in the Oracle VM Manager to generate an error when there is
an attempt to change the shareable flag in a physical or virtual disk attached to running virtual machine.
When running, a virtual machine disk (physical or virtual) is not shareable. Previously, the logic of the
Oracle VM Manager would allow such an attempt but would not actually perform the change or generate
an error message. (27614615)
• The Oracle VM Manager Command Line Interface ciphers have been hardened to prevent connections
that use weak CBC-based ciphers. (27793673)
• An issue was addressed in the Oracle VM Manager Command Line Interface that was causing high CPU
utilization in CLI sessions. (28450026)
• The Oracle VM Manager MySQL installer script has been hardened to prevent a deadlock situation when
deleting event data records. (26843931)
• Java Debug Wire Protocol (JDWP) access has been disabled in Oracle VM Manager. JDWP is intended
only for debugging. (28543033)
• Oracle VM Manager has been enhanced to allow the moving of a vm.cfg file from one repository
to another, even if the virtual machine is running in the BUI. For more information, see Migrate or Move
Virtual Machines in the Oracle VM Manager User's Guide. (26757099)
• The Oracle VM Agent code has been improved to handle situations where the rpcbind service is
disabled. Disabling this service was causing NFS repos to fail to mount after a reboot of Oracle VM
Server. (28699279)

• To resolve SSH connection issues with the Oracle VM Manager Command Line Interface, the SSH
server implementation used by the CLI has been updated to support all required security algorithms.
Systems accessing Oracle VM Manager using OpenSSH Release 7.0 can now connect to the CLI using
the stronger default security protocols. (24742496)
• Connection leaking in the Oracle WebLogic component used by Oracle VM Manager has been fixed.
This eliminates login failures, database corruption issues and connection errors experienced by some
Oracle VM Manager users due to a lack of available resources. This fix reduces the occurrence of error
messages such as "no resources available in pool ovm-odof-ds to allocate to applications" and "Waiting
for connection". (26675991)
• The Oracle VM Server installer can now complete the installation process in case xen.gz is not present;
for example in the case of ipxe-, uefi- ,and iscsi-based installation. (24376778)
• Virtual machine logging has been enhanced to indicate what causes the migration of a VM. For example,
when a VM is live-migrated due to a DRS policy, administrators see information such as "CPU usage is
at 41.1% which is over the threshold of 25.0%". (27911937)
50
• Several issues have been addressed with the Oracle VM Agent and generic Oracle Storage Connect
plugin. This includes better retrieval of device mapping information when EMC Power Path is in use.
(27901631)
• The RDMA functionality has been improved to correctly detect and configure Mellanox network interface
cards, whether they provide Ethernet or InfiniBand connectivity. This allows Oracle VM to complete its
boot sequence on systems with Mellanox cards installed and RDMA enabled. (25238309)
• Scripts in the Oracle VM Agent have been improved to correctly detect Ethernet and InfiniBand
interfaces manufactured by Mellanox. This eliminates issues with creating bond interfaces on servers
containing network interfaces of the affected types. (26541812)
• The Oracle VM devmon service has been hardened to correctly handle block devices with long names
and paths, as well as multipath devices. This significantly reduces the risk of the service crashing due to
a buffer overflow. (27486687 and 27486525)
• The method to persist certain server pool settings, such as the cluster timeout, has been improved.
Customized server pool settings are now correctly preserved even after a regeneration of the Oracle VM
Manager database. (26795755)
• If a virtual machine is configured with CPU pinning, it can now be cloned to a template. This operation
failed in previous versions. (26789306 and 26365024)
• Statistics collection through the Oracle VM Agent has been improved to make sure that repository file
system details are always communicated correctly to the Oracle VM Manager. (26003962)
• An issue was resolved where virtual machines configured with an amount of RAM close to the maximum
provided by the host server, regularly failed to start or restart. The Oracle VM code now makes sure that
there is enough scrubbed RAM available before the VM is started. (27534600)
• An issue in Xen 4.4.4-155.14 through 4.4.4-155.17 has been resolved to allow Oracle Solaris guests with
multiple vCPUs to boot correctly. (27525698)
• The Oracle VM Manager code for operations on virtual machines with high availability enabled has been
improved to ensure the correct VM status is always reported. (27241657)
• Thanks to better management of C-states in Xen, virtual machines can now take advantage of higher
frequencies of physical CPUs at times when the load on other CPUs in the system is low. (27182738)
• When "Best Server" is selected as the VM start policy, an improved algorithm now selects a server more
efficiently than before. This results in significantly better performance and shorter times for a virtual
machine to start up or Live Migrate. (27161103)
• The upgrade code has been hardened to ensure that an Oracle VM Server can never be upgraded to
a version higher than Oracle VM Manager. In a normal upgrade scenario, the Oracle VM Manager is
upgraded first, and can be used to manage certain older Oracle VM Server versions until they are also
upgraded. However, managing newer Oracle VM Server versions is not supported. (26988270)
• With certain devices, SCSI inquiry commands generate warning messages in the logs, because
the commands are not supported by the device and considered illegal. Since there is no impact on
functionality, the logging has been modified to write DEBUG instead of WARNING. (26932873)
• It is now acceptable that the URL of the Oracle VM Manager Web Interface starts with "https://
console.<domain>". Previously, the word "console" at the start of the URL would be rejected, and the
connection attempt would result in an "Error 404: Page not found". (26283106)
• Additional checks for resource locking have been included in Oracle VM Server for SPARC, to avoid
crashes due to duplicate removal attempts and similar purge list issues. (26241929)
51
• Virtual machines running Oracle Linux with UEK R2 no longer lock up during live migration, thanks to a
fix that allows processes to be frozen and thawed correctly through Xen. To take advantage of this fix,
you must upgrade the virtual machine kernel to the latest version of UEK R2. (25644455)
• A newly implemented Xen boot parameter, dom0_vcpus_pin, allows administrators to specify how
dom0 vCPUs are mapped to the server's physical CPUs. This results in more flexible and accurate CPU
pinning. Further information on CPU pinning can be found in Oracle VM Virtual Machine Control, in the
Oracle VM Administrator's Guide. (25559771)
• Code changes have been implemented to make sure that configuration updates to a virtual machine,
such as disk migrations, are always represented correctly in the vm.cfg file. Previously, discrepancies
sometimes occurred when jobs failed and modifications were not rolled back. (24626034)
• Several issues have been addressed with Template and Virtual Appliance data truncation in the MySQL
database. Previously, origin file paths longer than 4,000 characters could result in job errors and Oracle
VM upgrade failures. (23099378)
• In the storage configuration section of the Anaconda installer, a call to a non-existent kernel module has
been removed. The many resulting non-fatal log messages no longer appear, which makes debugging
much simpler. (27525259)

• Fixes an issue where the Oracle VM Manager pre-upgrade script fails with the following error message:
cannot concatenate 'str' and 'javainstance' objects. (25896467)
• Fixes an issue where Microsoft Windows guest virtual machines fail to migrate. (25801187)
• Fixes an issue where VNICs are displayed in the incorrect order when using the Oracle VM Manager
Web Interface to edit a virtual machine with multiple VNICs. (25249076)
• Fixes an issue where it is not possible to delete storage repositories when error messages indicate that
the storage device is busy and Oracle VM Server cannot unmount the file system for the repository.
(26427886)
• Fixes an issue so that dom0 can reclaim space on the file system when a user domain makes space
available. (25342487)
• Reduces the amount of time it takes to start virtual machines with large amounts of memory. (25860374)
• Fixes an issue where additional memory is incorrectly allocated to virtual machines when they are
restarted. (26396728)
• Fixes an issue where removing block devices results in unresponsive behavior. (25498155)
• Fixes an issue where virtual machine migration hangs indefinitely. (25638583)
• Fixes an issue where it is not possible to add VNICs to running virtual machines after they are migrated.
(25692157)
• Fixes an issue where virtual machines do not restart after stopping unexpectedly. (25729452)
52
• Fixes an issue where the operation to add or remove a VLAN exits with error messages instead of
indicating if the VLAN already exists. (25796887)
• Fixes an issue in cases where Xen kernel panics occur when the Kdump service restarts. (25861742)
• Fixes an issue to persist the disabling of multicast snooping on a bridge. (25870875)
• Fixes an issue where it is not possible to create repository exports on Oracle VM Server. (26244801)
• Fixes an issue where the default maximum number of grant frames and PIRQs numbers for dom0 and
user space domains must be increased. (26338166)

The following notable bugs are fixed in Oracle VM Release 3.4.3:
• Fixes an issue where Link Local Discovery Protocol (LLDP) packages are enabled by default on Oracle
VM Server. These packages are not required, and are disabled by default in this release. (25254072)
• Fixes an issue where the Oracle VM Server discovery process fails due to the Oracle VM Manager Yum
repository configuration. (25107129)
• Fixes an issue where Desktop Bus (D-Bus) support is not available as part of the libvirt package that
is supplied with Oracle VM Server. (25035614)
• Fixes an issue where you are unable to configure CPU pinning for a running virtual machine. As a result,
there is no longer a requirement to stop and then start the virtual machine for the configuration to take
effect. (24938500)
• Fixes an issue where the Oracle VM Agent is unable to distinguish local root disk partitions from LUN
disk names when there are a large number of LUNs on the system. (25261502)
• Fixes an issue where slow response times are encountered when rescanning physical LUNs on Oracle
VM Servers. (25105813)
• Fixes an issue where the vmcore memory size on the Management Domain (dom0) exceeds the total
memory allocated to the dom0 . (24842742)
• Fixes an issue where instances of Oracle VM Server are not booting after installation to LUN targets
larger than 2TB in size. (24811512)
• Fixes an issue where Guest VM creation is slow due an issue in the XENMEM_populate_physmap
macro resulting in Xend 100% CPU usage. (24738858)
• Fixes an issue where MD RAID devices are disabled during Oracle VM Server upgrades. (24676299)
• Fixes an issue where importing a compressed virtual machine template may result in large system image
files once the templates are unpacked. (23594530)
• Fixes an issue where you are unable to create kickstart configurations that assemble software RAID
devices during the Oracle VM Server installation. (22204542)
• Fixes an issue where Oracle VM Server is unable to present software RAID devices to Oracle VM
Manager. (21910748)
• Improves prompts used when changing the password for the MySQL root password to ensure
instructions are clear. (25485730)
53
• Fixes an issue where you are unable to update the MySQL root password in the database so that
it matches the MySQL root password that you set with the Oracle VM Manager Administrator Tool.
(22973573)
• Fixes an issue where the Edit Virtual Machine dialog does not load vNICs in the correct order.
(25904204)
• Fixes an issue where the Export to Excel option on the Jobs tab is unresponsive. (24805469)
• Fixes an issue where you may experience delays when rescanning physical disks from Oracle VM
Manager. (25073132)
• Fixes an issue where Oracle VM Manager miss-interprets the on_crash parameter in the vm.cfg when
the repository is refreshed. (25060508)
• Fixes an issue where Oracle VM ULN and public ULN channels do not contain the latest tzdata package.
The tzdata package is now updated to tzdata-2017b-1.el6.noarch.rpm. (24847941)
• Enhances the Oracle VM Agent to automatically include existing vSwitches to the Oracle VM Agent
network database. (18508248)
• Fixes an issue where memory release is unacceptably slow during graceful VM shutdown. (20816669)
• Fixes an issue where the Kdump service fails to start on the user domain (domU). (19807079)

• Fixes an issue where multiple sets of PortUp and PortDown events are unnecessarily generated
when a server is discovered or when the port on a server goes up or down, resulting in a slow down in
performance on Oracle VM Manager. (23738392)
• Fixes an issue where duplicate server scan events are generated when re-discovering a server, resulting
in a slow down in performance on Oracle VM Manager. (2888398)
• Updates to the Oracle VM Utilities to resolve some issues are now posted on My Oracle Support (MOS)
at patch 13602094. (24303705, 24300124, 24300120)
• Enables network configuration operations on a Xsigo port for Oracle Private Cloud Appliance.
(22694975)
• Fixes an issue where the block hotplug script does not account for gaps in used Loop devices.
(22875089)
• Fixes an issue where some Oracle VM Manager jobs fail with operations on Dell Storage with Dell
multipath.conf. (22909259)
• Adds the libxenstore and libxenstore-devel packages to the addons channel for the Oracle
Linux Yum Server, so they can be used with Oracle Linux 6 guests. (22909892)
• Fixes an issue where it takes an excessive amount of time to release memory from a guest during a live
migration. (23095319)
• Adds a new command to add, delete, or show routes on a given interface from the Oracle Private Cloud
Appliance User Interface. (23154685)
• Fixes an issue where a server cluster failure occurs in some cases during a server reboot, when
managing a large number of LUNs. (23169165)
54
• Fixes an issue where the VM console in the Oracle VM Manager Web Interface hangs during some live
migration events. (23253588)
• Fixes an issue where a DNS Round-Robin configuration forces NFS to be mounted multiple times due to
multiple IP assignments. (23577814)
• Enhancement added to the Xen hypervisor that makes devices assignable and unassignable.
(23749204)
• Adds /etc/grub.d/30_linux to the Oracle VM Server installation to enable bare metal Linux installs
for some Cloud operators. (24348702)
• Fixes an issue where a VM cannot start due to frequent duplicate Xend child processes. (24371183)
• Fixes an issue where the storage_plugin_listFileSystems command is not returning complete

discovery data to Oracle VM Manager. (24414865)
• Fixes an issue where GRUB2 does not inherit the crashkernel parameters when upgrading Oracle
VM Server from Release 3.2.x or 3.3.x to Release 3.4.2. If you have manually installed and configured
the kdump service on Oracle VM Server Release 3.2.x or Release 3.3.x, and you then upgrade Oracle
VM Server to Release 3.4.1, the kdump service no longer functions. See Confirm kdump Service
Settings after Upgrading in the Oracle VM Installation and Upgrade Guide. (24512683)
• Fixes an issue with yum upgrades from 3.2.10 or 3.2.11 due to the removal of the ql2xxx-firmware
from Oracle VM Release 3.4. (24529773)
• Fixes a Kdump failure and kernel panic in Oracle Server X5-8 with the QLogic 25Gb NIC. (24554631)
• Fixes an issue where several VM related jobs cannot complete after an upgrade from Oracle VM
Release 3.3.x. (23134128)
• Fixes an issue where a user is unable to set more than 512GB of memory for Solaris 11 guests on
Oracle VM Server for SPARC. (23206373)
• Fixes an issue where some upgrades fail with the following message: Error upgrading
core database, upgrade cannot continue! and the following entry in the log files:
UpdateUserAndCertEntities does not exit. (23283190)
• Fixes an issue where a user is unable to discover a server using the Oracle VM Manager Web Interface
due to the use of uppercase alphabetic characters in the UUID. (23635359)
• Fixes an issue where a user cannot login to Oracle VM Manager with an AUTHORIZED_GROUP and is
using Microsoft Active Directory authentication. (23744937)
• Fixes an issues where the Oracle VM Manager upgrade terminates in some cases shortly after running
the ovm_preUpgrade script. (24009772)
• Fixes an issue where a running VM is moved to a different shared repository. (24387377)

Oracle VM Release 3.4.1 includes the notable bugs that have been fixed in the earlier 3.3.x errata
releases. Additionally, Oracle VM 3.4.1 includes a number of enhancements, as described in Section 3.7,
Oracle VM Manager build 1369 is an errata update for the Release 3.4.1 build 1350. Build 1369 offers fixes
for bugs that were identified after build 1350 was released. Oracle VM Manager Release 3.4.1 build 1369
55
has been validated in combination with Oracle VM Server Release 3.4.1 build 1351 and Oracle VM Agent
for SPARC Release 3.4.1 build 1350.
Notable bugs fixed in Oracle VM Manager Release 3.4.1 build 1369 are as follows:
• Fixes an issue where the upgrade does not complete when VM origin URLs or network install path is
greater than 512 characters. (23003986)
• Fixes an issue where OVA files with URLs that are greater than 512 characters cannot be imported.
(23012337)
• Fixes an issue where the user cannot proceed beyond the web UI login prompt after successfully
entering user credentials. (23017746)
• Fixes an issue where in some cases the pre-upgrade script fails with an error “cannot concatenate 'str'
and 'javainstance' objects”. (23031621)

• Fixes an issue where the logs get loaded with “Data too long for column” entries. (24848792)
• Fixes an issue where the ovs-agent logs get loaded with “Event queue is full” entries, causing Oracle
VM Manager jobs to hang. (24841984)
• Fixes an issue where some upgrades from Oracle VM Server Release 3.2.10 fail with “Transaction
Check” errors. (24510423)
• Fixes an issue where in some cases a virtual machine migration may fail with Oracle VM Agent for
SPARC. (24486936)
• Fixes an issue where two pop-up menus are displayed incorrectly when you right click on the VNC
console display area. (23247656)
• Fixes an issue where in some cases the upgrade script fails with the message “Server upgrade in
progress”. (22746573)
• Fixes an issue where the OVMModelDump fails to retain tag information when rebuilding Oracle VM
Manager. ( 22741229)
• Fixes an issue where in some cases the Oracle VM Manager upgrade fails with the message
“AttributeError: getSummaryDisplayStatus”. (22660433)
• Fixes an issue where in some cases the repository cannot be refreshed and the following message is
displayed: “DOM0 has invalid exports”. 22616221
• Fixes an issue where discovery of Oracle VM Server on Fiber Channel over Ethernet (FCoE) LUN fails
due to the interface name appended with -fcoe. (22584539)
• Fixes an issue where problems may occur when doing a UI refresh in some scenarios. (22270904)
• Fixes an issue where a DNS entry is removed after discovering Oracle VM Server. (25353998)
• Fixes an issue where very slow response times are encountered when re-scanning ISCSI physical LUNS
on Oracle VM Server. (25176548)
• Fixes an issue where Oracle VM Server is slow to create a virtual machine, resulting in Xend 100% CPU
usage. (24738894)
56
• Fixes an issue where in some cases Xend hangs with a high CPU utlization. (24376707)
• Fixes an issue with statistics validation that results in statistics being dropped. (24369962)
• Fixes an issue where a virtual machine cannot start due to frequent duplicate Xend child processes.
(23625563)
• Fixes an issue where the block hotplug script does not account for gaps in used loop devices.
(23269321)
• Fixes an issue where bondport names are changed after Oracle VM Server is deleted and then re-
discovered. (23193644)
• Fixes an issue with an Oracle VM Server SSL key vulnerability. (22755974)
• Fixes an issue where the kdump service for Oracle VM Server on an Oracle Sun Server X4-4 with a
QLogic QLE2562 Host Bus Adapter (HBA) requires the nox2apic kernel parameter. (22729287)
• Fixes an issue where a DNS Round-Robin configuration forces NFS to be mounted multiple times due to
multiple IP assignments. (22683343)
• Fixes an issue with Netra X5-2 where 40G Ethernet interfaces (i40e) goes into an up and down loop
status after adding bond0 to the bridge. (22605450)
• Fixes an issue with two instances of the same virtual machine running on different servers under a heavy
load. (22393202)
• Fixes a Xen issue for memory management. (22145952)
• Fixes an issue where installations are not possible on an instance of Oracle VM Server with more than
4TB of memory. (21219500)
• Fixes an issue with LACP bond mode with 1GB NIC and with dom0_max_vcpus=20. (20745556)
• Fixes an issue where the LRO setting should remain disabled if all the VLAN interfaces are not removed
from a bridge. (20466383)
• Fixes an issue where the Oracle VM Agent for SPARC fails to start after a reboot on T7 servers.
(25106965)
• Fixes an issue where the Oracle VM Agent for SPARC upgrade from 3.2.10 may fail in certain cases
with an active guest domain. (22651391)
• Fixes an issue where Oracle VM Agent for SPARC on Oracle Solaris displays the message: “Numeric
value (n) out of range of long (-x – y)” (24575522)

• Resolves a problem where in some cases that an Oracle VM Manager event (ArchiveTask) does not
have the proper status. (22300975)
• Fixes a problem with the UI where in some cases the parent job is marked as completed in the job
summary; however, the children jobs are still running. (22101966)
• Corrects a problem where the database backup hangs on an upgrade if there is a root keystore.
(21804503)
57
• Corrects a problem that Oracle VM Manager failed to be installed on Oracle Linux 6.7. (21548314)
• Sets the default CLI client inactivity timeout value to 45 minutes to allow for the copy of large files.
(21547396)
• Fixes an issue where the Java processes grow very large with many VMs. (21368302)
• Enhances the periodic database cleanup process when it is unable to keep up with many VMs and the
database grows over time. (21320889)
• Enhances the discovery process by dropping invalid Page83 ID events from the Server. (21121751)
• Fixes an issue that prevents users to add more than 4 virtual disks to Solaris 10 guest (Oracle Solaris 10
1/13) with the domain type Xen_HVM_PV_Drivers. (20626989)
• Fixes a compatibility issue in Oracle VM Agent database (Berkeley DB) during the server upgrade.
(22821483)
• Fixes a problem where a PVHVM guest cannot start when Xen virtual disk is on the driver domain.
(22242513)
• Fixes a problem that Oracle VM Server installation failed on the HP BL465C GEN8. (21906833)
• Fixes a problem that HVM guest failed to launch using xl command. (21748894)
• Fixes a Xen hypervisor bug that caused race condition under certain situation. (21544772)
• Fixes an issue where kdump was not working when X2APIC is set to "enable". (21197271)
• Fixes an issue where the deprecated ETHTOOL_OFFLOAD_OPT needs to be converted to

ETHTOOL_OPTS in network startup script upgrading from Oracle VM Server 3.3.1. (20989506)
• Improves the memory release during a graceful VM shutdown. (20816684)
• Fixes an issue where the LRO setting should be disabled when the interface is part of a bridge.
(20390557)
• Fixes a problem where the kickstart installation failed for a specific VLAN interface. (20011623)
• Fixes an issue where rebooting a large VM (256G memory and higher) took over 4 minutes. (19731529)
• Fixes a problem where a VM cannot be started when the images are stored on the NFS server of
another VM. (18889929)
• Resolves an issue where the Oracle VM Agent does not come up with Python 2.7 which is the default for
Solaris 11.3. (21976240)
• Fixes a problem where the Manager was unable to discover a SPARC server with a virtual switch.
(21302405)

• Disables the transitional YUM repository temporarily during an upgrade to ensure a successful upgrade
between Oracle VM Server 3.3.x errata releases. (20330043)
• Fixes an issue in the statistic query builder for the file system. (20364416)
58
• Fixes a problem with the upgrade script that was causing it to fail after the first step in the process.
(20372446)
• Fixes a null pointer exception error with Page83 when attempting to delete a server from a pool or
model. (20373362)
• Fixes a problem where resizing existing LUNs did not always work. (20397450)
• Fixes a problem with an SSL handshake exception when adding a customer SSL certificate. (20702236)
• Fixes a server sorting problem in the navigation panel in the Oracle VM Manager Web Interface.
(20814532)
• Fixes an issue where the console did not display information about virtual machines after an upgrade.
(20828842)
• Fixes an issue where user was not able to register multiple storage arrays. (20958122)
• Fixes an issue that caused autobackup feature to hang. (21123499)
• Fixes an error condition where sometimes after rebooting a virtual machine, an ext4 filesystem error is
displayed. (19357800)
• Fixes long server discovery time with a large number of disks on Oracle VM Server for SPARC.
(20158892)
• Fixes Discover_Network failure with “no device found for vswitch” message on Oracle VM Server for
SPARC. (20593971)
• Disables GRO on new installs when routing/bridging with IXGBE driver. (19514003)
• Fixes an issue with a VLAN created over a bond, where it may not come up on restart if the MAC
address of the bond changes. (19802253)
• Fixes an issue where dom0 kernel reported "Can't map rx data" with bnx2x 10Gb NICs (20397398)
• Fixes a problem where refreshing a file server would sometimes return the error message "too many
values to unpack". (20510340)
• Fixes an issue when upgrading from Oracle VM Server 3.2 the ETHTOOL_OFFLOAD_OPT parameter
name changed to ETHTOOL_OPTS in ifcfg files. (20526276)
• Fixes a problem with select hardware configurations where dom0 does not come back online after a
reboot. (20659992)
• Fixes an issue where guests were not shutting down correctly. (20663386)
• Fixes a problem where a Brocade HBA does not detect storage and shows the error "kernel: Can't locate
firmware cbfw-3.2.3.0.bin". (20682061)
• Fixes a deadlock problem when calling logging functions in XendBootloader. (20752002)
• Fixes an intermittent issue where a virtual machine would not bootup after a successful shutdown.
(20781679)
• Fixes an issue where InfinBand Virtual Functions were being put "Out of Service" when large virtual
machines were being started or shutdown. (21133414)
• Fixes a problem where memory release was slow during a graceful shutdown of a virtual machine.
(21133543)
59
• Fixes a problem when rebooting a large virtual machine takes a long time and causes the XM CMD to
hang. (21133626)
• Fixes an issue where Live Migration with the -SSL option fails with a bad descriptor error. (21269578)

• Fixes an issue that causes network discover to fail when Oracle VM Agent for SPARC is installed on
Oracle Solaris 11.2 under certain configuration. (20646623)
• Fixes an issue that causes changing the MTU to fail when the dlmp service is enabled. (20185577)
• Fixes an issue that causes the action of taking ownership to fail when the control domain runs Oracle
Solaris 11.2. (20185575)
• Fixes an issue that causes Oracle VM Agent for SPARC to fail on Oracle Solaris 11.2 control domain.
(18371968)
• Fixes a server upgrade issue where fba (Brocade Fibre Channel HBA Driver) is not loaded for the FC
slots. (20729090)
• Fixes an issue where the virtual machine status shows "domain-unnamed" after live migration. The fix is
delivered with newer Xen package (xen-4.3.0-55.el6.22.18 or later). (20687187)
• Fixes an issue that live migration from earlier Oracle VM Server versions to 3.3.2 leaves Linux PVHVM
guest in a hung state. The fix is delivered with newer Xen package (xen-4.3.0-55.el6.22.18 or later).
(19517860)
• Fixes an issue that idle virtual machines may use more CPU resources than they need. (20138111)
• Fixes a network setting issue by using the "ETHTOOL_OPTS" directive instead of

"ETHTOOL_OFFLOAD_OPTS". (19731130)
• Fixes "unauthorized access" errors when an Oracle VM Server has been removed from a clustered
server pool. (19725961)
• Fixes an issue where the virtual machine cannot ssh to a server located outside the Oracle VM
environment. (19589497)
• Fixes an issue when stopping a virtual machine. (19557384)
• Fixes the issue where an HVM guest may reboot under certain configuration. (19440731)
• Fixes the issue where a PXE boot installation fails when there is no DNS resolution. (19181050)
• Fixes incorrect copying of small files. (19121000)
• Fixes an issue where Oracle VM Server cannot be installed on a server that has a LUN attached with a
Windows file system. (19173545)
• Fixes an issue that caused some other software installation to fail. (19181087)
• Fixes a user interface issue when cloning Oracle VM templates using Internet Explorer 9. (20077741)
• Fixes an issue with the SOS Report Tool to include the vm.cfg files and Ethtool data. (19952640)
60
• Fixes the issue where the VM START ON BEST Server Policy does not balance the load correctly.
(19982628)
• Fixes a time-out issue for Oracle VM Manager Web Services during long-running operations. (19788626)
• Fixes the issue where a successfully launched Job is killed after multiple launch attempts. (19636855)
• Fixes an issue to show the correct virtual machine console of the selected virtual machine. (19590077)
• Fixes the issue where adding an Oracle VM Server that has its management network interface in a
VLAN, didn't add the IP address and hostname to the /etc/hosts file. (19587036)
• Fixes an issue that caused an upgrade failure. (19526524)
• Fixes an upgrade issue where the MTU is inconsistent between the Bridges and the Virtual Interfaces
(VIFs). (19241260)
• Fixes the issue that some special characters were not handled correctly when using Firefox browser to
access the serial console. (19187642)
• Fixes the issue where non-sparse Virtual Disks became sparse after resizing them via the Oracle VM
Manager. (19146857)
• Fixes the issue where sparse copying of virtual disks did not work in SPARC environments. You must
run Oracle Solaris 11.2 or greater within the control domain. (14851945)
• Fixes the issue where Oracle VM Manager shows the disk size as 0 when using multipath devices and
the first device in the list is passive. (19131600)
• Fixes the issue that Control-C is mishandled in serial console. (19004079)
• Fixes the issue that the serial console fails to display long entries correctly. (18969505)
• Fixes the issue of non-US keyboard mapping when accessing virtual machine console. (18089107)
• Fixes the issue that the cursor is not displayed in the serial console for SPARC guest. (18085387)
• Updates MySQL to the newer version 5.6.21. (20062369)
• Includes the latest critical patch update for Weblogic from October 2014. (19346370)
• Includes Java 7 critical patch updates in Oracle VM Manager (19346310)

• Fixes an issue with uninstalling Oracle WebLogic Server during uninstalling Oracle VM Manager.
(16203060)
• Fixes an issue where the Oracle VM Manager does not initialize after installing and starting it.
(16202979)
• Fixes an issue where an object cannot be deleted.(16823781)
• Fixes an "Object Not Found" exception when deleting a file system mount. (17219387)
• Fixes an issue where it is not possible to upgrade due to a JDBC connection error. (17250224)
61
• Fixes a performance issue to speed up the discovery process of a physical LUN. (17447037)
• Fixes an issue to properly handle duplicated storage initiators when deleting an Oracle VM Server.
(17263779)
• Adds support to specify the network ID when editing a Virtual NIC via the Oracle VM Manager Command
Line Interface. (17294253)
• Fixes an issue in which VLAN objects were deleted during discovery. (16886580)
• Fixes the failure which occurred when trying to add more than four disks on Solaris 10. (16939432)
• Fixes an issue where ISCSI log out fails with the error "FAILED TO DELETE NODE RECORD FOR
PORTAL". (16886208)
• Fixes the exception when Oracle VM Manager is started and shows the error "FAILED TO START
MODEL ENGINE - JAVA.LANG.NULLPOINTEREXCEPTION". (17192350)
• Fixes the exception that occurs during the Storage Connect plug-in upgrade when Oracle VM Manager
cannot access the plug-in. (16855900)
• Fixes a performance issue to speed up job debug transcript. (16988868)
• Fixes the issue where jobs are missing start and end times. (17192350)
• Fixes the issue to make sure a server local network does not have any ports allocated to it before
creating the network. (17173360)
• Fixes an issue that prevented Oracle VM Server from upgrading to a version not supported by Oracle
VM Manager. (16225828)
• Fixes an issue with redundant "refresh storage layers" operations in the case of multiple LUNs presented
to an access group. (16345107)
• Fixes an issue with "Object Not Found" exceptions during parallel operations which include discovery
and VM delete. (16569334)
• Fixes Null Pointer Exception in the event of a null Storage Connect plug-in. (16843328)
• Fixes problem importing a VM on SPARC servers. (16441398)
• Improves Oracle VM Manager performance. (16600883)
• Displays the correct version number for Oracle VM Manager during installation or upgrade. (16473785)
• Fixes incorrect object count for virtual machines in the Oracle VM Manager log files. (16382730)
• Prevents thread leaks when stopping multiple virtual machines sequentially or in parallel when using the
Oracle VM Manager CLI. (16357202)
• Prevents a Null Pointer Exception when removing a LUN from an Access Group. (16357417)
• Fixes a rare condition when the starting command of a virtual machine did not get executed. (16051311)
• Fixes a security vulnerability exposed by Oracle VM Manager upgrade process. (16239127)
• Fixes the "Object Not Found" issue when a virtual disk file has been manually removed (or renamed).
(16226364)
62
• Fixes a memory leak issue after exiting the Oracle VM Manager Command Line Interface when running
the exit.sh script. (16236217)
• Adds certain event classes required by some Oracle software. (16092276)
• Fixes the issue that the Oracle VM Guest Additions (VM-API) send keys and values are logged in
events. (16179187)
• Adds support in Oracle VM Manager Command Line Interface for returning the "Page83 ID" when listing
physical disks. (15950559)
• Improves the time needed to scrub the free memory during installation or boot time for Oracle's Sun
Server X2. (14829299)
• Fixes an issue where weak cipher connections are allowed for secure live migration. (16721961)
• Fixes an issue where the Oracle VM Agent allows weak cipher connections. (16721654)
• Fix which includes Xen tools (QEMU) patches to make hot-plug for vCPU work correctly. (17562626)
• Fixes an issue where the (deprecated) modprobe.conf file was still used for bonding configuration.
(16892503)
• Updates the ethtool package to support the -f option. (17264204)
• Fixes an issue where OVMWATCH reports the wrong UUID on live migration. (16453997)
• Fixes an issue where HVM virtual machines in an OVF assembly have a limit of four virtual disks.
(16609127)
• Fixes an issue with mounting EMC Power Path volumes. (16511097)
• Fixes an issue where the network interface does not come up after reboot in LACP mode. (16495256)
• Fixes an issue where PV virtual machines cannot connect to network when using 31 virtual interfaces.
(16039922)
• Fixes an issue that failover failed on bond using ixgbe driver with jumbo frames enabled. (16886409)
• Disables the bridge multicast_snooping to avoid potential packet drop from the guests. (16746299)
• Fixes an upgrade issue to return the correct UUID when discovering an Oracle VM Server with an
SMBIOS newer than version 2.6. (16221689)
• Sets a maximum of 20 vCPUs for Dom0 on large systems to provide better out-of-the-box10Gb Ethernet
performance. (15865742)
• Adds IPMI lanplus interface support. (14777351)
• Fixes an issue where a SPARC virtual machine may fail to access its ZFS pool after restart from Oracle
VM Manager. (16909866)
• Fixes the issue where duplicated warning message is displayed when logging into the control domain.
(16173730)
• Adds package dependency on NTP to ensure it is present. (16297871)
• Fixes the issue that Oracle SPARC M5 servers are not correctly identified. (16383869)
63
• Provides the update script to perform Oracle VM Agent upgrade on SPARC. (16383971)

• Fixes the issue where during server discovery, Oracle VM attempted to discover all file server mounts
even if the server was not in the file server's admin server list. (14573204)
• Improves the handling of slave ports with differing MTU settings during bond creation. (13929346)
• Adds check for network port value, prevents a null pointer exception from being thrown. (14653155)
• Fixes the "Object Not Found" issue when hitting the Escape button in the VLAN dialog box. (15827079)
• Adds support for dynamically changing the cluster store cache size. The default cache size is now 150K.
(15850684)
• Fixes the issue where the latest update of Microsoft Internet Explorer versions 7, 8 and 9 failure to
connect to Oracle VM Manager over HTTPS . (14754924)
• Fixes the issues where closing the browser leaves open jobs in Oracle VM Manager in a bad state.
(15838028)
• Removes unnecessary locks when creating VNICs in a multi-threaded operation. (14054156)
• Fixes the issue when discovering a virtual machine that has disks in a undiscovered repository or has
undiscovered physical disks. (14104117)
• Object not found where vdisks are left stale in certain multi-thread operations.(14043681)
• Oracle VM Manager hangs after a restart due to various tasks running jobs in the global context.
(14175298)
• Stale lock issue on multithreaded server where object not found error happens in some rare situations.
(14108096)
• Oracle VM Manager fails to discover the server or start the server after the server hardware
configuration (i.e. BIOS) was modified. (14169237)
• HTTP cannot be disabled. (13524729)
• Oracle VM Manager UI time-out issue where the default value is not long enough for storage repository
creation. (13925232)
• List of target servers (and "other servers") is not ordered by name when migrating a virtual machine.
(14160596)
• Size of the "Edit Vlan Group" window should display all information correctly. (14160610)
• Navigation tree (servers) is not ordered by name. (14160581)
• Upgrade process must not continue when the Oracle VM Manager cannot be stopped. (14305714)
• Issue in server rediscovery due to the YUM repository URL reset. (14228607)
• iSCSI initiators are no longer associated with the ZFS Storage Appliance Access Groups after a restart
of the Oracle VM Manager . (14180913)
64

• Outage scenario requires acknowledging multiple events on multiple objects. (13845733)
• The installer does not allow the reuse of an existing database. (13744793)
• Cannot remove server pool file system from Oracle VM Manager if the server pool file system is
corrupted. (13601257)
• Unable to create a repository on a LUN that already has partitions on it. (13596838)
• HVM guests failed to start or panic when MEM is not equal to MAXMEM. (13560881)
• Cannot remove VM and Oracle VM Server from Oracle VM Manager if the Oracle VM Server goes away.
(13473061)
• OCFS2 storage repository size is not updated in core and user interface even if repository is refreshed.
(13449381)
• Oracle VM Server boot over multipath SAN fails to initialize DM MP devices. (13341598)
• VM start is pending. (13044663)
• API for CPU utilization returning negative values. (12999197)
• Resizing a physical disk/LUN does not resize the file system. (12962538)
• Oracle VM Server fails to boot from multipath SAN disks. (12682785)
• Unable to upgrade from Oracle VM Server Release 3.0.3 to Oracle VM Server Release 3.1.1 on an HP
ProLiant BL680c G5 Server. (14690247)

• Oracle VM Manager upgrade improvements significantly reduces upgrade time.
• IP addresses entered in Oracle VM Manager are always validated to ensure correct formatting. An error
message is displayed if the IP address is not properly formatted.
• The Linux kernel device manager (udev) has been improved to increase performance. The most
significant improvement is that the time udev takes to run after booting the server has been shortened
from 2-3 minutes to just seconds, eliminating system 'hangs' and other problems in systems which are
sensitive to start-up time.
• When the management network also fulfills the role of virtual machine network, a bridge for virtual
machine network connectivity is created on Oracle VM Servers as they are added to the environment. As
a result, virtual machines will continue to work properly when migrated to a new Oracle VM Server.
• DHCP is able to be used for VLAN Group interfaces. (13322814)
• Both Oracle VM Server and the Unbreakable Enterprise Kernel (UEK) have been patched to prevent
the flood of kernel warning messages caused by illegal configuration of certain Broadcom NetXtreme II
XGb (bnx2x) network controllers. If an illegal configuration is detected, only one warning message per
controller card is displayed.
65
• Several network throughput issues with certain Broadcom NetXtreme II XGb (bnx2x) network controllers
on Oracle VM Server have been resolved: default TPA settings have no adverse effect on network
throughput, and network between virtual machines and NFS storage no longer hangs with bnx2x
controllers.
• When using the untagged VLAN segment, the user must configure IP address information on the NIC
port, not on the VLAN interface. This eliminates duplicate configurations and any associated risks of
misconfiguration.
• A late locking scheme has been implemented for networks on virtual machine clones: the virtual NIC
connection in the virtual machine is only locked at the end of the clone operation. As a result, locking
issues with Ethernet networks no longer occur when multiple virtual machines are cloned in parallel from
the same template.
• In Oracle VM Manager , the Acknowledge All Events button effectively clears all events, not just the
items visible in the current list view.
66
Chapter 5 Supported Guest Operating Systems
Table of Contents
5.1 Oracle VM Server for x86 Supported Guest Operating Systems .................................................... 67
5.2 Oracle VM Server for SPARC Supported Guest Operating Systems .............................................. 70
The guest virtual machines you create must be one of the supported configurations listed in this section.
The supported guest operating systems differ virtual machines created in x86-based server pools, and
SPARC-based server pools.
5.1 Oracle VM Server for x86 Supported Guest Operating Systems

On Oracle VM Server for x86, guest virtual machines based on Linux and Solaris can be either Hardware
Virtualized (HVM) or Hardware Virtualized with PV Drivers (PVHVM).
The following table lists support for virtual machines with an HVM domain type and a Linux operating
system. Refer to the notes that follow the table for additional support information.
Table 5.1 HVM-Supported Linux Guest Operating Systems
Guest Operating System HVM 32-bit HVM 64-bit

Oracle Linux Release 7.x N/A Yes
Oracle Linux Release 6.x Yes Yes
Red Hat Enterprise Linux 7.x N/A Yes
Red Hat Enterprise Linux 6.x Yes Yes
CentOS 7.x N/A Yes
CentOS 6.x Yes Yes
CentOS 5.x Yes Yes
SUSE Linux Enterprise Server 11.x No Yes
SUSE Linux Enterprise Server 12 SP2 or later No Yes
Note
Additional support information for HVM-supported Linux guest operating systems is

as follows:
• You can create HVM guest virtual machines for Oracle Linux, Red Hat Enterprise
Linux, SUSE Linux Enterprise Server, and CentOS. However, the Xen PV drivers
are included by default with the kernels. Creating PVHVM guest virtual machines
is recommended for hardware virtualization to improve performance.
67
Oracle VM Server for x86 Supported Guest Operating Systems
• The minimum required kernel version for SUSE Linux Enterprise Server (SLES)
11 is 3.0.31-0.9.
The following table lists support for virtual machines with a PVHVM domain type and a Linux operating
system. Refer to the notes that follow the table for additional support information.
Table 5.2 PVHVM-Supported Linux Guest Operating Systems
Guest Operating System PVHVM 32-bit PVHVM 64-bit

Oracle Linux Release 7.x N/A Yes
Red Hat Enterprise Linux 7.x N/A Yes
CentOS 7.x N/A Yes
CentOS 6.x Yes Yes
CentOS 5.x Yes Yes
SUSE Linux Enterprise Server 11.x No Yes
SUSE Linux Enterprise Server 12 SP2 or later No Yes
Note
Additional support information for PVHVM-supported Linux guest operating systems

is as follows:
• Oracle Linux, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and
CentOS 5.x include the Xen PV drivers in the kernel-xen variant of the
kernel. Oracle Linux 5.x also includes the PV drivers in kernel-uek, the
Unbreakable Enterprise Kernel (UEK). Creating PVHVM guest virtual machines is
recommended for hardware virtualization with these kernels.
• Oracle Linux, Red Hat Enterprise Linux and SUSE Linux Enterprise Server
require the kernel-xenU variant of the kernel to use the PV drivers mode.
• The minimum required kernel version for SUSE Linux Enterprise Server (SLES)
11 is 3.0.31-0.9.
• To start a PVHVM guest on SLES 11, you must perform the following steps:
1. Install the operating system and upgrade to the 3.0.31-0.9 kernel version.
2. Shutdown the virtual machine.
3. In Oracle VM Manager, set the domain type for the virtual machine to Xen
PVM.
4. Restart the virtual machine.
68
Oracle VM Server for x86 Supported Guest Operating Systems
The following table lists support for virtual machines with either an HVM or a PVHVM domain type and a
Solaris operating system. Refer to the notes that follow the table for additional support information.
Table 5.3 HVM and PVHVM-Supported Solaris Guest Operating Systems
Guest Operating System PVHVM 32-bit HVM 32-bit PVHVM 64-bit HVM 64-bit
Oracle Solaris 11 N/A N/A Yes N/A
Oracle Solaris 10 Yes N/A Yes N/A
Note
Additional support information for HVM and PVHVM-supported Solaris guest

operating systems is as follows:
• Oracle Solaris support begins with Solaris 10 1/13 (update 11). The Solaris 10 or
Solaris 11 OS runs as a hardware virtual machine (HVM), which requires HVM
support (Intel VT or AMD-V) on the underlying hardware platform. By default,
Solaris 10 or Solaris 11 OS has the required PV drivers installed as part of the
OS. Oracle Solaris 10 supports x86 32-bit and 64-bit architecture. 32-bit or 64-bit
mode is selected at OS boot time by examining the hypervisor and the underlying
hardware. Oracle Solaris 11 supports x86 64-bit architecture only.
For details about Oracle software certification, refer to My Oracle Support Document 464754.1, titled
Certified Software on Oracle VM at https://support.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?
id=464754.1.
Also visit the Oracle VM resource page at http://www.oracle.com/us/technologies/virtualization/oraclevm/

resources/index.html to learn about the support plans for available for Oracle VM, Oracle Linux and Oracle
Solaris.
Table 5.4 CPU Paravirtualized Supported Guest Operating Systems
Guest Operating System Paravirtualized 32- Paravirtualized 64- Paravirtualized

bit (3.4.5) bit (3.4.5) 32-bit and 64-bit
(3.4.6)
a
Oracle Linux Release 7.x No No No
a
Oracle Linux Release 6.x Yes Yes No
a
a
a
Red Hat Enterprise Linux 7.x No No No
a
Red Hat Enterprise Linux 6.x Yes Yes No
a
a
a
CentOS 7.x No No No
a
CentOS 6.x Yes Yes No
a
CentOS 5.x Yes Yes No
a
SUSE Linux Enterprise Server 11.x No Yes No
a
SUSE Linux Enterprise Server 12 SP2 or No No No
later
a
PVM guests continue to operate when upgraded to 3.4.6, but should be converted to PVHVM.
69
Oracle VM Server for SPARC Supported Guest Operating Systems
Table 5.5 Microsoft Windows Supported Guest Operating Systems
Guest Operating Systems 64-bit 32-bit HVM HVM with

Oracle VM
Paravirtual
Drivers for
Microsoft
Windows
Microsoft Windows Server 2016 Yes N/A Supported Supported
R2
R2 SP1
Microsoft Windows Server 2008 Yes Yes Supported Supported
SP2
Microsoft Windows Server 2003 Yes Yes Supported Supported
R2 SP2
Microsoft Windows 10 Yes Yes Supported Supported
Microsoft Windows 8.1 Yes Yes Supported Supported
Microsoft Windows 8 Yes Yes Supported Supported
Microsoft Windows 7 SP1 Yes Yes Supported Supported
Microsoft Windows Vista SP2 Yes Yes Supported Supported
Note
To run Microsoft Windows guests as PVHVM-supported operating systems, you

must install the Oracle VM Paravirtual Drivers for Microsoft Windows. For a full list
of Microsoft Windows guest operating systems that are PVHVM-supported, see
Oracle VM Paravirtual Drivers for Microsoft Windows.
Table 5.6 Oracle VM PV Drivers for Microsoft Windows Supported Releases
Oracle VM Releases Oracle VM PV Drivers for Oracle VM PV Drivers for

Microsoft Windows Release Microsoft Windows Release
3.0.1 3.2.2 and above
Oracle VM 3.0 Yes No
Oracle VM 3.1 Yes No
Oracle VM 3.2 Yes Yes
Oracle VM 3.3 No Yes
Oracle VM 3.4 No Yes
5.2 Oracle VM Server for SPARC Supported Guest Operating

Systems
Guest virtual machines in an Oracle VM Server for SPARC-based server pool must run at:
• Oracle Solaris 10 11/06 as a minimum.
70
Oracle VM Server for SPARC Supported Guest Operating Systems
• Oracle Solaris 11 or later as a recommended guest OS.
See Creating and Starting a Guest Domain in the Oracle VM Server for SPARC Administration Guide.
For detailed information about supported firmware and operating systems, see System Firmware Versions
and Oracle Solaris OS Versions in the Oracle VM Server for SPARC Installation Guide.
For information about specific patches and additional information about supported guest operating
systems, see the Oracle VM Server for SPARC Release Notes and Oracle VM Server for SPARC
Installation Guide.
Note
Access the Oracle VM Server for SPARC documentation at http://www.oracle.com/

technetwork/documentation/vm-sparc-194287.html. To determine the version of
the Oracle VM Server for SPARC documentation to reference, run the pkg list
ldomsmanager command.
71
72
Chapter 6 Oracle VM Manager Support for Previous Oracle VM
Server Releases
As of Oracle VM Release 3.4.2, Oracle VM Manager supports current and previous Oracle VM Server
releases. For example, you can use Oracle VM Manager 3.4.2 or later to manage Oracle VM Server
Release 3.4.x, 3.3.x, 3.2.10, or 3.2.11.
Important
Although Oracle VM Manager supports current and previous Oracle VM Server

releases, it is highly recommended that you upgrade all instances of Oracle VM
Server to the latest release version to ensure that you have the latest supported
operations and features.
The following table shows the backward compatibility support that Oracle VM Manager Release 3.4.2 or
later provides for previous Oracle VM Server releases:
Table 6.1 Oracle VM Manager Backward Compatibility Support
Oracle VM Manager Oracle VM Oracle VM Server for x86 Oracle VM Server for
Release Server Releases SPARC
Release 3.4.2 or later Release 3.4.x Yes Yes

Release 3.4.2 or later Release 3.3.x Yes Yes
Release 3.4.2 or later Release 3.2.10 or Yes No
3.2.11
Release 3.4.6 or later Release 3.2.10 or No No
3.2.11
Note
As of Release 3.4.5, Oracle VM Manager uses the TLSv1.2 protocol as the default
to secure all connections. As a result, management of Oracle VM Server for
x86 at Release 3.2.10 or 3.2.11, and Oracle VM Agent for SPARC at Release
3.3.1, is not possible by default. When upgrading to Release 3.4.5, you need to
temporarily enable TLSv1 until all Oracle VM Servers have been upgraded to the
latest version. For instructions to enable TLSv1, and revert to the default and more
secure TLSv1.2 protocol, see Enabling the TLS Version 1 Protocol in the Oracle VM
3.4 Installation and Upgrade guide.
Note
As a Release 3.4.6, management of Oracle VM Server for x86 at Release 3.2.10 or

3.2.11, and Oracle VM Agent for SPARC at Release 3.3.1, is removed. For more
information, see Chapter 8, Deprecated and Removed Oracle VM Features in the
Oracle VM Release Notes.
If your Oracle VM environment consists of Oracle VM Manager Release 3.4.2 or later and one or
more instances of Oracle VM Server at a different release, you should review the list of supported and
unsupported operations and features, as follows:
Supported Operations Oracle VM supports most common operations when using Oracle VM
Manager to manage an instance of Oracle VM Server that is at an
73
Known Issues and Caveats with Backward Compatibility
earlier release, for example, creating virtual machines (VMs), cloning

VMs, starting and stopping VMs, migrating VMs, adding a server to an
existing server pool, and so on.
Unsupported Operations and In general, if you are using Oracle VM Manager to manage an instance
Features of Oracle VM Server that is at an earlier release, you cannot use
capabilities and features that were added in a later release than a given
Oracle VM Server release. For example, Oracle VM Release 3.4.1
introduced support to export Oracle VM virtual machines. This feature is
available only if you are using both Oracle VM Manager and Oracle VM
Server Release 3.4.1 or later. This capability is not available if you are
using Oracle VM Manager Release 3.4.2 to manage Oracle VM Server
Release 3.3.4.
The following operations and features are not supported in an Oracle

VM environment where Oracle VM Manager 3.4.2 or later is managing
one or more instances of Oracle VM Server at an earlier release, for
example Release 3.3.4:
• Exporting Oracle VM virtual machines.
• Performing live migrations of virtual machines that have virtual disks

on local storage.
• Persisting simple names for repository objects as metadata.
• Calculating the apparent size (GIB) of storage repositories.
• Using NVM Express (NVMe) devices as storage repositories or for

local storage of virtual machine disks.
• Using Microsoft Windows Failover Clustering functionality.
• Discovering vital product data (VPD) page 0x84 information from

LUNs on Linux-based guests.

In the case where you are using Oracle VM Manager to manage an instance of Oracle VM Server that is at
an earlier release, certain known issues and conditions exist. Before you attempt to upgrade your Oracle
VM environment or use mixed Oracle VM Manager and Oracle VM Server releases, you should review the
following points:
Oracle VM Server for x86 • You must ensure that you upgrade all instances of Oracle VM Server
to Release 3.2.10 or later before you upgrade to Oracle VM Manager
Release 3.4. You can upgrade to Release 3.4 only if all instances of
Oracle VM Server are at Release 3.2.10 or later.
Note
As of Release 3.4.6, management of Oracle

VM Server for x86 at Release 3.2.10 and
3.2.11 is removed. For more information, see
Chapter 8, Deprecated and Removed Oracle
VM Features in the Oracle VM Release Notes.
74
• You must ensure that each instance of Oracle VM Server within a

server pool is at the same minor version. For example, all servers in
a server pool must be at Release 3.2.10, 3.2.11, 3.3.x, or Release
3.4.x.
• It is not possible to change the Oracle VM Agent password if you

are using Oracle VM Manager 3.4.2 or later to manage instances of
Oracle VM Server at Release 3.2.x. You should remove ownership
of the server, then use the ovs-agent-password on Oracle VM
Server to change the Oracle VM Agent password, and then discover
Oracle VM Server from Oracle VM Manager.
• The repository apparent size displays incorrect values if you present

NFS-based storage repositories that share the same file system on
the same NFS server to one or more Oracle VM Server(s).
Oracle VM Server for SPARC • All instances of Oracle VM Server for SPARC must be at 3.3.x or
later, if you are using Oracle VM Manager 3.4.2 or later to manage
previous instances of Oracle VM Server for SPARC.
Note
As of Release 3.4.6, management of Oracle

VM Agent for SPARC at Release 3.3.1
is removed. For more information, see
Chapter 8, Deprecated and Removed Oracle
VM Features in the Oracle VM Release Notes.
• You must ensure that each instance of Oracle VM Server within a

server pool is at the same minor version. For example, all servers in a
server pool must be at Release 3.3.x, or Release 3.4.x.
• The repository apparent size displays incorrect values if you present

NFS-based storage repositories that share the same file system on
the same NFS server to one or more Oracle VM Server(s).
75
76
Chapter 7 Configuration Limits for Release 3.4
Configuration limits for Oracle VM represent tested and recommended limits, and are fully supported by
Oracle.
Table 7.1 Server Pool and Cluster Maximums
Item x86 Maximum SPARC Maximum

Oracle VM Servers in a server 64 64
pool (unclustered)
Oracle VM Servers in a server 32 32
pool (clustered)
Number of servers 256 (16 servers * 16 server pools) 256 (16 servers * 16 server pools)
Number of server pools 16 16
Number of configured virtual 5120 (20 virtual machines * 256 5120 (20 virtual machines * 256
machines servers) servers)
Number of running virtual 2,560 (10 virtual machines per 32768 (128 virtual machines per
machines server * 256 servers) server * 256 servers)
• Fujitsu M10-4S server, this

limitation is 65536 (256 virtual
machines per server * 256
servers)
• Oracle SPARC M-series

servers, this limitation is 128
virtual machines per server *
the number of physical domains
(PDoms). Each physical domain
acts as its own server with its
own set of logical domains.
Note
Some performance tuning is required in Oracle VM environments where you

manage more than 80 instances of Oracle VM Server with a single instance of
Oracle VM Manager. In these environments, you should increase JVM memory
allocation to 8G and reduce the interval of statistics collection. See the following
topics for more information:
• Increasing the Memory Allocated to Oracle WebLogic Server in the Oracle VM

Administrator's Guide
• Preferences in the Oracle VM Manager User's Guide
Oracle Support can apply additional tuning configurations to optimize Oracle VM

Manager performance, such as reducing the number of events that Oracle VM
Manager processes. Contact Oracle Support for more information.
77
Table 7.2 Oracle VM Server Maximums

CPUs 384 (Tested) Equivalent to the number of
available CPUs.
2048 (Designed)
• SPARC M7-16 server, this is
equal to 4096
• SPARC M6-series servers, this

is equal to 3072.
• SPARC M5-series servers, this

is equal to 1536.
• SPARC T5-series servers, this

is equal to 1024.
• Fujitsu M10-series servers,

this is equal to 2048 (fully
configured).
Virtual CPUs per host 4096 8 per core on Oracle M-series and
Oracle T-series servers
• SPARC M5-series servers have

6 cores per socket.
• SPARC M6-series servers have

12 cores per socket.
• SPARC T5-series servers have

2 per core on Fujitsu M10
• Fujitsu M10-series servers have

RAM 6 TB Equivalent to available RAM.
• 32 TB on Fujitsu M10-series
servers, SPARC M5-series
servers, or SPARC M6-series
servers.
• 2 TB on a SPARC T7-4 server.
• 8 TB on a SPARC M7-16
server.
• 4 TB on SPARC T5-series
servers.
A small amount of RAM is

required for the hypervisor.
78
Concurrently Running Virtual 1024 128 per physical domain (PDOM)
Machines
The maximum number of SPARC M5 or M6-series server
concurrently running virtual each have a maximum of 512
machines depends on the virtual logical domains (128 logical
machine configuration, hardware domains per physical domain *
resources, and workloads the 4 physical domains). However,
virtual machines are running. For when following Oracle best
this reason, the practical limit practices that allocate full cores
for concurrently running virtual for guests, the maximum number
machines is 300. of logical domains is 192 on
SPARC M5-series servers and
384 on SPARC M6-series servers.
Note
• By default, when you install Oracle VM Server, dom0 is configured with a

maximum of 20 vCPUs. This configuration optimizes performance for large
systems and is suitable for most deployments.
If you plan to change the number of maximum vCPUs for dom0, Oracle
Corporation recommends that you set the number of vCPUs for dom0 to no
greater than the number of physical CPUs per socket. Oracle Corporation also
recommends that you pin dom0 vCPUs to physical CPUs on the first socket.
If you use hyper-threading, you should count in units of threads instead of
cores. For more information see Editing Boot Parameters To Enable Hypervisor
Features in the Oracle VM Installation and Upgrade Guide.
• For information on performance optimization goals and techniques for Oracle VM

Server for x86, see Optimizing Oracle VM Server for x86 Performance, on Oracle
Technology Network at: http://www.oracle.com/technetwork/server-storage/vm/
ovm-performance-2995164.pdf.
Table 7.3 Virtual Machine Maximums

Virtual CPUs PVM: 256 Equivalent to the number of
available CPUs on the server.
Note
• SPARC M7-16 server available
As of CPUs is equal to 4096.
Release
3.4.6, • SPARC M6-series servers
support for available CPUs is equal to
Paravirtualized 3072.
(PVM)
guests is • Fujitsu M10-series server (fully
removed. configured) available CPUs is
For more equal to 2048.
information,
see These maximums do not account
Chapter 8, for CPUs allocated to any other
Deprecated domains, such as the control
and domain. The hypervisor can
79
Removed allocate subsets of the overall
Oracle VM CPU, memory, and I/O resources
Features of a server to any given logical
domain.
HVM: 128; or 32 for Microsoft
Windows guests.
Note
As of
Release
3.4.6, the
HVM limit
is 64 for
Microsoft
Windows
guests.
PVHVM: 128; or 32 if using

Oracle VM Paravirtual Drivers for
Microsoft Windows.
Note
As of
Release
3.4.6, the
PVHVM
limit is 64
if using
Oracle VM
Paravirtual
Drivers for
Microsoft
Windows.
Virtual RAM on 32-bit guests PVM: 64 GB N/A
Note
As of
Release
3.4.6,
support for
Paravirtualized
(PVM)
guests is
removed.
For more
information,
see
Chapter 8,
Deprecated
and
80
Removed
Oracle VM
Features
HVM: 64 GB
PVHVM: 64 GB
Virtual RAM on 64-bit guests PVM: 500,000 MB Equivalent to the amount of
available RAM installed on the
Note server.
The • 32 TB on Fujitsu M10-series

amount of servers, SPARC M5-series
memory servers or SPARC M6-series
supported servers.
is
dependent • 2 TB on an SPARC T7-4 server.
on the
guest • 8 TB on an SPARC M7-16
kernel. server.
Oracle
has tested A small amount of RAM is
470GB required for the hypervisor.
with
These maximums do not account
Oracle VM
for RAM that is allocated to any
Release
other domains, such as the control
3.4.2.
domain. The hypervisor can
Note allocate subsets of the overall
CPU, memory, and I/O resources
As of of a server to a given logical
Release domain.
3.4.6,
support for
Paravirtualized
(PVM)
guests is
removed.
For more
information,
see
Chapter 8,
Deprecated
and
Removed
Oracle VM
Features
HVM: 1,000,000 MB
Exceeding the 1 TB limit may

work, but can result in slow boot
times and the possibility that the
81
virtual machine hangs at boot and
soft lockups occur on the hosting
Oracle VM Server.
If your environment needs to

support live migration for HVM
guests, this value must not exceed
1 TB.
PVHVM: 2,000,000 MB; or 256

GB if using Oracle VM Paravirtual
Drivers for Microsoft Windows
Release 3.2.3 and later.
Virtual NICs PVM: 31 Depends on the total number of
available Logical domain channels
Note (LDC).
As of Total number of virtual NICs

Release and virtual disks per domain for
3.4.6, SPARC is no more than the total
support for number of available LDCs of the
Paravirtualized supported SPARC server.
(PVM)
guests is For more information, see Using
removed. Logical Domain Channels in the
For more Oracle VM Server for SPARC
information, Administration Guide.
see
Chapter 8,
Deprecated
and
Removed
Oracle VM
Features
HVM: 8
PVHVM: 8
The limit to the number of virtual

disks and virtual NICs is shared
when using the Oracle VM
Paravirtual Drivers for Microsoft
Windows. Therefore, if you define
8 virtual NICs, only 32 virtual disks
can be defined for the same virtual
machine.
Virtual disks Limits provided here are imposed Depends on the total number of
by the guest kernel and not available Logical domain channels
the hypervisor. The maximums (LDC).
presented depend on the
capabilities of the guest operating Total number of virtual NICs
system. and virtual disks per domain for
82
PVM: 104 SPARC is no more than the total
number of available LDCs of the
Note supported SPARC server.
As of For more information, see Using

Release Logical Domain Channels in the
3.4.6, Oracle VM Server for SPARC
support for Administration Guide.
Paravirtualized
(PVM)
guests is
removed.
For more
information,
see
Chapter 8,
Deprecated
and
Removed
Oracle VM
Features
HVM: 4 IDE (including CD-ROM),

7 SCSI
PVHVM: 107; or 40 if using

Oracle VM Paravirtual Drivers for
Microsoft Windows Release 3.2.3
and later.
The limit to the number of virtual

disks and virtual NICs is shared
when using the Oracle VM
Paravirtual Drivers for Microsoft
Windows. Therefore, if you define
8 virtual NICs, only 32 virtual disks
can be defined for the same virtual
machine.
Virtual disk size OCFS2: 64 TB Equivalent to the size of available

disks on the server.
NFS: 10 TB
63
The Oracle Solaris limit is 2 .
Note
• For information on the configuration limits used for the latest Oracle VM
Paravirtual Drivers for Microsoft Windows release, see http://docs.oracle.com/cd/
E88077_01/index.html.
• Virtual machine maximums assume a single virtual machine using all available
resources.
83
• Access the Oracle VM Server for SPARC documentation at http://
www.oracle.com/technetwork/documentation/vm-sparc-194287.html. To
determine the version of the Oracle VM Server for SPARC documentation to
reference, run the pkg list ldomsmanager command.
Table 7.4 Storage Maximums

32
LUNs in a storage array iSCSI: 2 targets.
This limit should not be confused with multipath devices. • 1,000 LUNs
Each identical LUN connected to a single multipath device is
considered to be a separate LUN with regard to this limit. • 2,000 Paths
Examples of supported configurations of iSCSI LUNs: Fibre Channel (FC):
• 1,000 LUNs with 2 paths each • 1,000 LUNs
• 500 LUNs with 4 paths each • 4,000 Paths
• 250 LUNs with 8 paths each
Examples of supported configurations of Fibre Channel LUNs:
• 1,000 LUNs with 2 paths each
• 1,000 LUNs with 4 paths each

OCFS2 volume size 64 TB N/A
Files per OCFS2 volume 30,000 N/A
Table 7.5 Network Maximums

NICs/ports per network bond 256 255 per bond or aggregate.
Network bonds per Oracle VM No limit No limit
Server
Number of VLANs 1024 1024
Number of MAC addresses 10240 10240
84
Chapter 8 Deprecated and Removed Oracle VM Features
Table of Contents
8.1 Removed Features in 3.4.6 ......................................................................................................... 85
8.2 Deprecated Features in 3.4.6 ...................................................................................................... 85
Review deprecated and removed features in this release of Oracle VM.
8.1 Removed Features in 3.4.6

The following Oracle VM features are removed:
• Paravirtualized (PVM) guests: Support for Paravirtualized (PVM) guests is removed. For instructions
on how to convert your PVM guests to hardware virtualized, with paravirtualized drivers (PVHVM) or
hardware virtualized (HVM), see Disabling Paravirtualized Guests on Oracle VM Server in the Oracle VM
• Management of Oracle VM Server for x86 at Release 3.2.10 and 3.2.11, and Oracle VM Agent for
SPARC at Release 3.3.1: Management of Oracle VM Server for x86 at Release 3.2.10 or 3.2.11 and
Oracle VM Agent for SPARC at Release 3.3.1 is removed. For more information, see Upgrading Oracle
VM, Upgrading Oracle VM Server from Release 3.2.10 and Upgrading from Oracle VM Agent for SPARC
Release 3.3.x or Between 3.4.x Errata Releases in the Oracle VM 3.4 Installation and Upgrade guide.
8.2 Deprecated Features in 3.4.6

The following previously deprecated Oracle VM features will be removed from a future release of this
software:
• Oracle VM SOAP API : The Oracle VM SOAP API is deprecated.
• Oracle VM Utilities scripts: A number of the Oracle VM Utilities scripts are deprecated by the Oracle
VM Manager Command Line Interface. For more information, see Using the Oracle VM Utilities in the
Oracle VM Administrator's Guide
• Virtual IP address (VIP) : The field to specify a virtual IP address (VIP) while creating a server pool is
deprecated but is still available for backwards compatibility.
• See Create Server Pool in the Oracle VM Manager User's Guide for information on creating a server
pool.
• See What is a Master Server and a Virtual IP Address? in the Oracle VM Concepts Guide for more
details on why VIPs are deprecated for server pools in this release.
• YAML formatted configuration file : The function to install Oracle VM Manager silently using a
predefined YAML formatted configuration file is deprecated for customer use and is only intended for
internal use during testing at Oracle.
• HugePages support: The HugePages feature is deprecated. You should not enable HugePages when
creating or editing virtual machines with a domain type of PVM in the Oracle VM Manager Web Interface
or Oracle VM Manager Command Line Interface.
• Assembly terminology: The use of the term Assembly to refer to Oracle VM Virtual Appliances is
deprecated.
85
86
Chapter 9 Known Limitations and Workarounds
Table of Contents
9.1 Integration Between Oracle VM Server for SPARC and Oracle VM Manager .................................. 91
9.2 Upgrading Oracle VM Agent for SPARC Release 3.3.x/3.4.1/3.4.2 to Release 3.4.6 Fails ................ 92
9.3 Editing a Bond Port Fails on Oracle VM Server for SPARC Running Oracle Solaris 11.4 ................. 92
9.4 Cannot Install or Upgrade Oracle VM Manager Release 3.4.5 or 3.4.6 on Oracle Linux 7 Update
6 Guest Virtual Machines ................................................................................................................. 92
9.5 Attached Disks Not Visible at Startup on Oracle Solaris 11.4 Virtual Machine ................................. 92
9.6 Cannot Re-install Oracle VM Server Across Multiple Disks or LUNs using a Kickstart
Configuration .................................................................................................................................... 93
9.7 Oracle VM Server Installation Hangs with RAID10 Boot Partition ................................................... 93
9.8 Cannot Retrieve Information for File System Mounted on Invalid Mount Point ................................. 93
9.9 Cannot Configure the Oracle Solaris Support Repository using the Oracle VM Manager Web
Interface ........................................................................................................................................... 93
9.10 Backup Failure for the MySQL Database Repository .................................................................. 94
9.11 Unable to Login into the Oracle VM Web Services API ............................................................... 94
9.12 Incorrect PVM Migration Error Message Displayed when Secure VM Migration Enabled ................ 95
9.13 Default VM Start Policy Is Different in Oracle VM Manager Command Line Interface and Oracle
VM Manager Web Interface .............................................................................................................. 95
9.14 Virtual Machine Fails to Boot with kexec .................................................................................. 95
9.15 Missing Physical Disk Warning for Oracle VM Server Instance After Upgrading Oracle VM
Manager ........................................................................................................................................... 95
9.16 Suspend Error During Storage Live Migration ............................................................................ 96
9.17 Cannot Change Memory Configuration of Running PVHVM Guests Based on CentOS 6 ............... 97
9.18 PVHVM Guests Based on CentOS 5 Do Not Start Successfully After Conversion from PVM .......... 97
9.19 PVM Guests Based on CentOS 5 Do Not Start Successfully After Conversion from PVHVM .......... 97
9.20 Guests Based on CentOS 5.11 Start with the Maximum Memory Configuration ............................ 97
9.21 Guests Based on CentOS 5 Display Incorrect Number of VNICs ................................................. 98
9.22 Live Migrating Oracle Solaris Guests to Oracle VM Server Release 3.4.4 or Later Results in
Guest Reboot ................................................................................................................................... 98
9.23 Cannot Remove Software RAID Devices from Oracle VM Manager ............................................. 99
9.24 VNICs Deleted When Editing Virtual Machine .......................................................................... 100
9.25 Enable High Availability Option is Disabled Due to Restart Option ............................................. 100
9.26 Cannot Upgrade Oracle VM Manager Due to Presence of Temporary Files ................................ 100
9.27 Job List Excel Spreadsheet Name Contains Unexpected Characters ......................................... 100
9.28 Oracle Linux 6 HVM Guest Virtual Machine with Hard Disk of 2TiB in Size Hangs on Boot ........... 101
9.29 Kernel Panic when Assigning More Than 32 virtual CPUs to Oracle Linux 32-bit PVM Guests ...... 102
9.30 Live Migration of Guest Virtual Machine Fails Due to Linux Kernel Version ................................. 102
9.31 PVHVM Guest Boot Delayed by Xen Balloon Driver ................................................................. 102
9.32 Oracle VM Server Cannot Boot from Software RAID Devices with Disks that are 2TB or Larger .... 103
9.33 Oracle VM Server Does Not Boot After Installation to LUN Targets Larger Than 2TB .................. 103
9.34 Oracle VM Server Boot Delay and I/O Error Messages with Oracle ZFS Storage Array ................ 104
9.35 FIPS Integrity Error Message for SSH Connections from Oracle VM Server ............................... 104
9.36 Incorrect MAC Address Displayed for Bond Port ...................................................................... 105
9.37 Kernel Panic when Booting Guest Virtual Machine with 100 or more Virtual Disks ....................... 105
9.38 Different Default Values for the serverAffinityType when Creating Anti-Affinity Groups ................. 105
9.39 Performance Impact when Less than 8 CPUs Configured for dom0 ........................................... 105
9.40 Upgrading Oracle VM Server from Release 3.2.10 to 3.3.4 and then to 3.4.2 fails ....................... 106
9.41 Logical Volume Manager (LVM) is enabled on Oracle VM Server Release 3.4.1 ......................... 106
87
9.42 Btrfs Root File System Not Supported on PVM Guest Virtual Machines ...................................... 107
9.43 SUSE Linux Enterprise Server 12 SP2 and Later Not Supported For PVM Guest Virtual
Machines ........................................................................................................................................ 107
9.44 Cannot Connect to the Oracle VM Manager Web Interface with Microsoft Internet Explorer .......... 107
9.45 The Virtual Machine Console Window in the Oracle VM Manager Web Interface Opens in the
Background when using Microsoft Internet Explorer ......................................................................... 107
9.46 Inconsistent Value for SPARC Domain Type ............................................................................ 108
9.47 Integer Only Values for the statValue Option ............................................................................ 108
9.48 Aborting a Server Discovery Operation Results in Server Listed with an Unknown Operational
State .............................................................................................................................................. 108
9.49 Automatic Discovery Operations can Conflict with Server Configuration Operations .................... 109
9.50 Solaris 11 x86 Virtual Machine Disk Type Can Cause Kernel Panic on Boot ............................... 109
9.51 Solaris 10 x86 Virtual Machine Installation Fails To Boot .......................................................... 109
9.52 Oracle Linux 7 Virtual Machines Imported from a VirtualBox Virtual Appliance Do Not Start on
Oracle VM ...................................................................................................................................... 110
9.53 (x86 Only) IOStat Stays at 100% Util for Oracle Linux Virtual Machines After a Storage Migration . 110
9.54 Serial Console Does Not Respond for Oracle Linux 7 HVM Virtual Machines .............................. 111
9.55 Error When Attaching CD-ROM Drives to Running HVM Virtual Machines .................................. 111
9.56 Deleting Bond Ports for VLANIF Interfaces Deletes the VLANIF ................................................ 111
9.57 (SPARC Only) NFSv4 Delegation Interferes with Cluster Heartbeat, Using NFSv3 Results in
RPC Error PROGRAM/VERSION MISMATCH ................................................................................. 112
9.58 Cannot Import OVF Files into Oracle VirtualBox ....................................................................... 112
9.59 Oracle VM Manager Cannot Receive Messages from SPARC Virtual Machines .......................... 112
9.60 Cannot Boot Oracle VM Server Installed on an HP DL380 Gen9 Server in UEFI mode ................ 112
9.61 (x86 Only) Cannot Boot Oracle VM Server with Broadcom 57840S CNA Card After PXE Install .... 113
9.62 Changing to Dynamic Mode IP Address Assignment Does Not Rollback if the Server is Unable
to Obtain an IP Address ................................................................................................................. 113
9.63 Drag and Drop from Blank Space of Object ............................................................................. 113
9.64 Error When Using the Administrator Tool in Parallel ................................................................. 113
9.65 Oracle VM Manager Command Line Interface TCP Port Conflicts With Port Reserved for NDMP .. 114
9.66 When A Virtual Machine Using A Shared Virtual Disk Is Moved To Another Repository, The
Shared Virtual Disk Is Cloned ......................................................................................................... 114
9.67 Unable to Remove a Storage Array if a File System Exists on a LUN ........................................ 114
9.68 Cluster Failure After An Offline Server is Removed From the Cluster While Another Cluster
Member is Offline ........................................................................................................................... 114
9.69 LSI Logic / Symbios Logic MegaRAID SAS 1078 is not supported on Oracle VM Server .............. 115
9.70 (SPARC Only) Hot-added CD-ROM Device is Detected As Hard Disk ........................................ 116
9.71 Fibre Channel LUNs Missing From Oracle VM Manager After Refresh ....................................... 116
9.72 (SPARC Only) Size of Physical Disk in Oracle VM Manager Incorrect When LUN Size is
Decreased on Storage Array ........................................................................................................... 117
9.73 The Apparent Size of a Repository in Oracle VM Manager Web Interface Does Not Update
Automatically .................................................................................................................................. 117
9.74 Virtual Disks Do Not Display on Solaris 10 Guests ................................................................... 117
9.75 Oracle Linux 5 Virtual Machines Converted from Physical Hosts Do Not Boot ............................. 118
9.76 SSL Exception in AdminServer Log File ................................................................................... 118
9.77 Oracle VM Servers in a Server Pool Must Be at the Same Minor Version ................................... 118
9.78 Oracle VM Manager Displays Incorrect Details for ZFS Storage Appliances After Cluster
Failover .......................................................................................................................................... 119
9.79 Oracle VM Server Upgrade Not Possible with NetApp Storage plug-in ....................................... 119
9.80 Oracle VM Manager Web Interface Incorrectly Displays Oracle VM Server Upgrade Required ..... 119
9.81 The Oracle VM Manager Silent Install Option Using A YAML Configuration File Is Deprecated ..... 119
9.82 Aborting An Oracle VM Server Upgrade Initiated By The UpgradeServers.py Script May Result
In Inconsistent Reporting on Upgrade Status ................................................................................... 120
9.83 Kdump On Oracle VM Server Only Supports Dump Levels 0 and 1 ........................................... 120
88
9.84 Network Receive Statistics For A Virtual Machine Are Invalid And Set To -1 ............................... 120
9.85 CPU Affinity After Live Migration of Virtual Machine on Non-Uniform Memory Access (NUMA)
Systems ......................................................................................................................................... 121
9.86 Virtual Machines Based on Oracle Solaris 11 Do Not Boot ........................................................ 121
9.87 Changing Domain Type from Xen HVM to Xen HVM PV Drivers Causes Informational Messages
in AdminServer.log ......................................................................................................................... 121
9.88 Single-Stream TCP Throughput is Degraded for Guest Virtual Machines Running UEK Release
4 .................................................................................................................................................... 121
9.89 Error Partitioning Caused by Disk Label or Format in UEFI Mode .............................................. 122
9.90 Kernel Panic when Booting Guest Virtual Machine with Oracle Solaris 11.2 ................................ 122
9.91 Oracle VM Manager Web Interface Goes to Blank Screen with Mozilla Firefox on a Linux
System ........................................................................................................................................... 122
9.92 HugePages Deprecated for PVM Guests as of Oracle VM Release 3.4.1 ................................... 123
9.93 HugePages Does Not Display as Selected in Oracle VM Manager Web Interface ....................... 123
9.94 Kdump Service Hangs at Discovery of FCoE Device with Broadcom CNA on HP Servers ............ 123
9.95 Do Not Discover Oracle VM Servers Earlier than Release 3.2.10 .............................................. 123
9.96 (SPARC Only) Cannot Export Virtual Appliance with Physical Disk Access ................................. 124
9.97 (SPARC Only) MTU Resets to the Default of 1500 After Server Power Off ................................. 124
9.98 Oracle VM Server Installer Fails When Modifying Swap Partitions ............................................. 124
9.99 Kernel Startup is Slow after Upgrading to UEK4 on PVHVM Guests .......................................... 125
9.100 Cannot Enable High Availability (HA) for Virtual Machines with HugePages .............................. 125
9.101 Kdump is Not Supported on FCoE SANs ............................................................................... 125
9.102 Cannot Edit Running Virtual Machines with HugePages and HA Enabled ................................. 125
9.103 Import URL Cannot Exceed Maximum Character Length ......................................................... 126
9.104 Performance Impact for Fewer than 8 CPUs Configured for dom0 ........................................... 126
9.105 Migration of PVHVM Guest Virtual Machines may be Affected by Linux Kernel Version ............. 126
9.106 SR-IOV Is Not a Supported Feature ...................................................................................... 127
9.107 Oracle VM Manager Upgrade Does Not Restore External Authentication Provider ..................... 127
9.108 Limit of 3 Virtual Machine Console Windows with Microsoft Internet Explorer ............................ 127
9.109 Virtual Machine Migration Job Loop During Oracle VM Upgrade .............................................. 127
9.110 The kdump Service Cannot Mount the Root Partition if Zone Connection to EMC Storage Array . 129
9.111 Oracle VM Server Hangs During Upgrade if Boot Partition Not Large Enough ........................... 129
9.112 GRO Must Be Disabled After an Upgrade When Routing/Bridging with IXGBE Driver ................ 129
9.113 Change in Variable Name for the eventGetTypes SOAP Call using Oracle VM Web Services
API ................................................................................................................................................. 129
9.114 Restart Virtual Machines After Upgrade ................................................................................. 130
9.115 LRO Setting Bridge Interface ................................................................................................. 130
9.116 Disable Transitional Update Repository .................................................................................. 130
9.117 (X86 Only) SWIOTLB Buffer Errors When Using Jumbo Frames on Oracle VM Server .............. 130
9.118 Operation Transactions ......................................................................................................... 130
9.119 One Instance of Oracle VM Manager Web Interface Per Browser Session ................................ 131
9.120 IPv6 Updates On Some Microsoft Windows Guests Do Not Reflect in Oracle VM Manager ........ 131
9.121 Incorrect Text Color After Acknowledging VM Errors ............................................................... 131
9.122 Unable to Copy Text or Take Screen Shots of Error Dialogs ................................................... 131
9.123 Safari Web Browser on Windows is not Supported ................................................................. 132
9.124 Object Lock Prevents Some Operations ................................................................................. 132
9.125 Unable to Configure NTP For All Servers ............................................................................... 132
9.126 (x86 Only) Oracle VM Server Installer Goes To Black Screen After Running /sbin/loader ..... 132
9.127 (x86 Only) Oracle VM Server Installer Hangs Waiting for Hardware to Initialize ......................... 133
9.128 (x86 Only) Oracle VM Server Installer Hangs Examining Storage Devices For Large Number of
LUNS ............................................................................................................................................. 133
9.129 (x86 Only) Benign Error Message During Install: HDIO_GET_IDENTITY failed ......................... 133
9.130 (x86 Only) Cannot Use Installation Media to Upgrade Oracle VM Server if Earlier than Release
3.3.x .............................................................................................................................................. 133
89
9.131 (x86 Only) Oracle VM Server Upgrade From ULN or Oracle Public Yum Repositories is
Restricted to Servers That Do Not Use Non-Native Packages .......................................................... 134
9.132 (x86 Only) Many ISCSI or Fibre Channel LUNs Require More Server Memory .......................... 134
9.133 Clustered Server Pools in Mixed Platform Environments Require NFS Access Groups To Be
Configured ...................................................................................................................................... 134
9.134 (SPARC Only) Cluster Recovery May Fail When Using NFSv3 For Server Pool File System ...... 135
9.135 (x86 Only) Server BIOS Settings ........................................................................................... 135
9.136 (x86 Only) Oracle VM Server Does Not Support crashkernel=auto Boot Parameter ................... 135
9.137 Kdump Core Collector Using Sparse Copy Fails ..................................................................... 136
9.138 (x86 Only) Oracle VM Server Installation on Sun Fire X4800 ................................................... 136
9.139 (x86 Only) Installation of Oracle VM Server on some HP Server Hardware May Fail if Tape
Drive is Attached ............................................................................................................................ 136
9.140 (x86 Only) Wake On Lan (WOL) Fails if Oracle VM Servers on Different Subnets ..................... 136
9.141 (x86 Only) Sun Fire X4170 Server Not Fenced During Cluster Failure ...................................... 137
9.142 (x86 Only) Netconsole Unknown Error 524 During Oracle VM Server Start-up .......................... 137
9.143 (x86 Only) ACPI Buffer Error After Installing Oracle VM Server ................................................ 137
9.144 Failed Server Evacuation Defined in DPM Policy Generates User Acknowledgeable Event ........ 137
9.145 (SPARC Only) Serial Console Hangs During Installation of Oracle Solaris 11 on Virtual
Machine ......................................................................................................................................... 138
9.146 Editing Virtual Machine Configuration File Results in Unexpected Behavior .............................. 138
9.147 Concurrent Template Operations May Fail Due to Lock Issue .................................................. 138
9.148 (SPARC Only) Wrong Error Message Returned When Importing A Template From An Incorrect
URL ............................................................................................................................................... 139
9.149 (x86 Only) Virtual Machine Fails to Restart On Another Server in the Cluster if ACPI is Enabled . 139
9.150 (x86 Only) Oracle Solaris 10 Virtual Machine May Hang During Shutdown ............................... 139
9.151 (x86 Only) Virtual Machine Created with Network (PXE) Installation Does Proceed Beyond Pre
Boot ............................................................................................................................................... 139
9.152 (x86 Only) Maximum Memory to Start a PVM Guest is 470 GB ............................................... 140
9.153 (x86 Only) Creating a PVM Guest Slow Using Local Storage .................................................. 140
9.154 (x86 Only) Live Migration of a VM may be Affected by Guest Linux Kernel Version ................... 140
9.155 (x86 Only) Improving Mouse Pointer Control in Virtual Machine Console .................................. 140
9.156 (x86 Only) Solaris 10 Kernel Panic on Some AMD Systems .................................................... 140
9.157 (x86 Only) Solaris 10 Release 8/11 Guest Hangs at Boot ....................................................... 141
9.158 (x86 Only) Solaris 11 Guest With More Than 2 VCPUs Hangs at Boot ..................................... 141
9.159 (x86 Only) Solaris 11 Release 2011.11 Guest Hangs at Boot .................................................. 142
9.160 (x86 Only) Windows Server 2008 R2 x64 HVM Guests do Not Cleanly Shut Down .................... 142
9.161 (SPARC Only) Need Actual Available Memory for Live Migration ............................................. 143
9.162 (x86 Only) Network Card Limit in Virtual Machines ................................................................. 143
9.163 QLogic cLOM8214 1/10 Gigabit Ethernet NIC Initializes with Link State Down .......................... 143
9.164 Renaming of QLogic cLOM8214 1/10 Gigabit Ethernet NIC is Incorrect .................................... 143
9.165 (x86 Only) Incorrect ARP Reply When Using Jumbo Frames ................................................... 144
9.166 (x86 Only) Changing Cluster Heartbeat Network Does Not Reflect New IP Address .................. 144
9.167 NFSv4 Read/Write Delegation Not Supported ........................................................................ 145
9.168 (x86 Only) Unclean File System Causes Errors When Used as a Server Pool File System ......... 145
9.169 (SPARC Only) Agent Fails to Reconcile Multipath LUNS If Solaris I/O Multipathing is Disabled ... 145
9.170 (x86 Only) Size of New LUN on Server is Incorrect If an Existing LUN Is Unmapped First .......... 146
9.171 (x86 Only) Remapping LUNs Causes Storage Refresh To Hang .............................................. 146
9.172 (x86 Only) LUNs Must Be Cleaned Prior to Storage Repository Creation .................................. 146
9.173 NetApp ONTAP (8.2 c-mode) Operating System Does Not Work With Oracle VM ..................... 147
9.174 (x86 Only) Black Listing of System Disks for Legacy LSI MegaRAID Controllers Not Supported .. 147
9.175 (x86 Only) Blacklisting of System Disks for Multipathing Fails on HP Smart Array (CCISS) Disk
Devices .......................................................................................................................................... 147
9.176 (x86 Only) HP Smart Array CCISS Disk Devices Are Not Supported For Creation of Local
Storage Repositories ...................................................................................................................... 148
90
Integration Between Oracle VM Server for SPARC and Oracle VM Manager
9.177 (x86 Only) Multiple Paths Used in Multipath Environments on Oracle Pillar Axiom Storage ......... 148
9.178 Refreshing a NAS-based File System Produces Invalid/Overlapping Exports ............................ 148
9.179 (x86 Only) Shared OCFS2 Cluster File System on Virtual Disk Not Supported .......................... 149
9.180 Virtual Disk Images Must Be Properly Aligned To The OCFS2 Block Size For Performance ....... 149
9.181 Oracle VM Manager Command Line Interface Backspace Key ................................................ 149
9.182 Oracle VM Manager Command Line Interface Allows THIN_CLONE cloneType On NFS ........... 150
9.183 Untagged VLAN Interface Missing After Upgrade of Oracle VM Manager ................................. 150
Find information on known limitations and workaround procedures for Oracle VM.
The titles of known issues contain platform designations as follows:
• If an issue applies to Oracle VM Server for x86 only, the title includes x86 Only.
• If an issue applies to Oracle VM Server for SPARC only, the title includes SPARC Only.
• If an issue applies to both Oracle VM Server and Oracle VM Server for SPARC, the title does not include
any platform designation.
9.1 Integration Between Oracle VM Server for SPARC and Oracle VM

Manager
In addition to known issues that might apply for a given release of Oracle VM, limitations exist for
managing Oracle VM Server for SPARC with Oracle VM Manager.
There are currently several features in Oracle VM Server for SPARC that cannot be represented in Oracle
VM Manager. These features include the following:
• Physical I/O domains such as SR-IOV, direct I/O, and root domains.
• Certain network options such as Private VLAN (PVLAN), "vNICs on VNets" or multiple MAC addresses
per virtual network device, and Quality of Service (QoS) configurations.
• Crypto accelerators assigned to guest domains. This is a feature on SPARC servers prior to the T4
series that required some administrative effort. With the T4 series and later, crypto accelerators are
always available without any administrative effort required.
• Whole-core and max-cores constraints, although these can be configured by editing the configuration file
named /etc/ovs-agent/agent.ini that is used by the Oracle VM Agent for SPARC on each Oracle
VM Server.
• Multiple service domains, also known as 'shadow service domains', which are typically used to provide
redundancy. Initial support for these has been implemented in the Oracle VM Agent for SPARC.
There are a number of limitations that exist in Oracle VM Manager for server pools that contain Oracle VM
Server for SPARC servers. These limitations include the following:
• ISCSI or Fibre Channel storage cannot be used to store a repository or a server pool cluster file system.
However, these disks can be used for direct virtual machine assignment. NFS storage should be used
if you need to set up a server pool cluster file system. Either NFS, ZFS or a local disk may be used to
configure a repository.
• Huge page support on SPARC systems is not controlled by Oracle VM. All the page sizes available on
the underlying hardware are always available to the guest virtual machine.
• Virtual machine suspend and resume functionality is not available for virtual machines running in a
SPARC-based server pool.
91
Upgrading Oracle VM Agent for SPARC Release 3.3.x/3.4.1/3.4.2 to Release 3.4.6 Fails
• Support for a secondary service domain, running alongside the primary service domain, has been added
to the Oracle VM Agent. This feature allows you to restart the primary service domain without causing
any interruption to network or disk I/O for any of your running virtual machines.
9.2 Upgrading Oracle VM Agent for SPARC Release 3.3.x/3.4.1/3.4.2

to Release 3.4.6 Fails
Upgrading Oracle VM Agent for SPARC Release 3.3.x, 3.4.1, or 3.4.2 to Release 3.4.6 results in errors
and eventually fails to upgrade the server.
Workaround: The workaround is to first upgrade Oracle VM Agent for SPARC Release 3.3.x, 3.4.1 or
3.4.2 to Release 3.4.5 on Oracle Solaris 11.3. From Release 3.4.5, after a reboot you can then upgrade
to Release 3.4.6 with Oracle Solaris 11.4. For more information, refer to the Oracle VM Installation and
Upgrade Guide.
Bug 28902444
9.3 Editing a Bond Port Fails on Oracle VM Server for SPARC

Running Oracle Solaris 11.4
Editing a bond port fails on Oracle VM Server for SPARC running Oracle Solaris 11.4 with an command
error message similar to the following:
/usr/sbin/dladm: -m is no longer supported.
This failure occurs because of a change in Oracle Solaris 11.4.
Workaround: The workaround is to remove the targeted port from the network and to delete the VLAN
interfaces using the port so that this bond port can be deleted and recreated with the appropriate mode.
Note
A running virtual machine that is using the network or port must either be stopped or
migrated to another server before the workaround operation can be performed.
Bug 28821715
9.4 Cannot Install or Upgrade Oracle VM Manager Release 3.4.5 or

3.4.6 on Oracle Linux 7 Update 6 Guest Virtual Machines
Upgrading Oracle VM Manager Release 3.4.5 to 3.4.6 fails on an Oracle Linux guest virtual machine when
the guest OS is first upgraded to Oracle Linux 7 Update 6. Similarly, installing Oracle VM Release 3.4.6 on
guest virtual machines running Oracle Linux 7 Update 6 is failing.
Workaround: Upgrade the guest OS to Oracle Linux 7 Update 6 after Oracle VM Manager Release 3.4.6
is running on the virtual machine.
Bugs 28907767 and 28898808
9.5 Attached Disks Not Visible at Startup on Oracle Solaris 11.4

Virtual Machine
After creating a Oracle Solaris 11.4 virtual machine on Oracle VM Release 3.4.6, attached disks are not
visible at startup when running the format command.
92
Cannot Re-install Oracle VM Server Across Multiple Disks or LUNs using a Kickstart Configuration
Workaround: The workaround is to run the format command from the /dev/rdsk/ directory to display
all attached disks.
Bugs 28797606
9.6 Cannot Re-install Oracle VM Server Across Multiple Disks or

LUNs using a Kickstart Configuration
If you try to re-install Oracle VM Server using a kickstart configuration across multiple LUNS, with one LUN
dedicated to swap, the installation fails with a device error message, similar to the following:
DeviceError: ('cannot replace active format', 'sdh')
This occurs because during the re-installation, the anaconda installation wizard fails to reformat the LUN
dedicated to swap as it is already in use from the previous installation, resulting in the error.
Workaround: There is no workaround for this issue. Oracle VM Release 3.4 supports installations of
Oracle VM Server onto a single disk or LUN only. As a result, kickstart installations across multiple disks in
a non-software RAID configuration is not supported.
Bug 27021529
9.7 Oracle VM Server Installation Hangs with RAID10 Boot Partition

If you install Oracle VM Server on a machine with a RAID10 disk configuration, the installation process
hangs at the end, because the command mdadm --wait-clean --scan cannot be completed. This
issue is caused by the fact that boot partitions are not supported on RAID10, but only on RAID1.
Workaround: Configure the software RAID on the server such that the /boot partition is written to a
RAID1 device. Restart the Oracle VM Server installation on the supported configuration.
Bug 27525377
9.8 Cannot Retrieve Information for File System Mounted on Invalid

Mount Point
If you are utilizing Oracle VM Server for SPARC in your Oracle VM environment and you are mounting a
file system, you must ensure that no white spaces or invalid characters are specified in the mount point
directory path. This also applies when mounting devices using the automounter mechanism. Mounting file
systems on invalid mount points can result in file system information retrieval failures, similar to:
AttributeError: 'NoneType' object has no attribute 'split'
Workaround: If possible, rename the device or alternatively, unmount the invalid mount point and mount
the device to a mount point that contains no white spaces or invalid characters. Refer to the Oracle Solaris
11.3 documentation for information on managing file systems: https://docs.oracle.com/cd/E53394_01/html/
E54785/.
Bug 27479482
9.9 Cannot Configure the Oracle Solaris Support Repository using

the Oracle VM Manager Web Interface
If you are updating a set of local Oracle VM Servers running on SPARC hardware, you may want to utilize
the Oracle Solaris Support Repository with it's associated SSL key and certification. Currently, the Oracle
93
Backup Failure for the MySQL Database Repository
VM Manager Web Interface does not provide any option to insert the required key and certification when
creating a new server update repository.
Workaround: Instructions on installing a certificate and key can be found in the book titled Install a
Certificate and Key for the Oracle Solaris Support Repository in the Oracle Solaris 11.3 Information Library
at: https://docs.oracle.com/cd/E53394_01/html/E54747/installkeycert.html
Bug 27572483
9.10 Backup Failure for the MySQL Database Repository

If you specify a new MySQL database backup directory, you may encounter a failure during the MySQL
database backup if the new directory does not exist, or does not have the correct permissions assigned.
By default, the MySQL database backup files are stored within /u01/app/oracle/mysql/dbbackup on
the Oracle VM Manager host, but it is possible to set a different directory if required.
Workaround: When changing the default MySQL database backup directory, you must ensure that the
new directory exists and has the correct permissions assigned on the Oracle VM Manager host as follows:
1. Create the new directory that you want to use for the MySQL database backup files, for example:
# mkdir /u01/app/oracle/mysql/new-backup-dir
2. Ensure the right permissions are set for the new directory:
# chmod 777 /u01/app/oracle/mysql/new-backup-dir
3. Update /etc/sysconfig/ovmm and specify the new directory for the DBBACKUP parameter:
DBBACKUP=/u01/app/oracle/mysql/new-backup-dir
4. Save and close /etc/sysconfig/ovmm for the new directory to take effect.
For more information on backing up the MySQL Database repository, see Backing up and Restoring
Oracle VM Components in the Oracle VM Administrator's Guide.
Bug 27582009
9.11 Unable to Login into the Oracle VM Web Services API

Connections to the Oracle VM Web Services API fail if you are using a Java runtime version lower than
1.7.0_131_b31. As of Oracle VM Release 3.4.5, the SSL TLS version 1 (TLSv1) protocol is disabled
within Oracle VM Manager for security reasons and connections using the TLSv1.2 protocol are only
accepted. The TLSv1.2 protocol is the default in Java runtime version 1.7.0_131-b31, and as a result,
connections to the Oracle VM Web Services API fail if a lower Java runtime version is used.
Workaround: Make sure you are using Java runtime version 1.7.0_131-b31 or higher. The Java
runtime version that ships with Oracle VM Manager Release 3.4.5 is sufficient. Alternatively, for lower
versions of Java runtime, update the Java client and make sure that the SSLContext ctx attribute is set
as follows:
SSLContext ctx = SSLContext.getInstance("TLSv1.2");
For more information about authentication against the REST API in the Java Client, see the Java topic in
the Oracle VM Web Services API Developer's Guide.
Bug 27611305
94
Incorrect PVM Migration Error Message Displayed when Secure VM Migration Enabled
9.12 Incorrect PVM Migration Error Message Displayed when Secure

VM Migration Enabled
As of Oracle VM Release 3.4.5, you can disable PVM guests from running on your Oracle VM Server
instance. As a result, migrating PVM guests to a destination Oracle VM Server instance with PVM guests
disabled is not possible and the following error message is displayed:
stderr: Error: PV guests disabled by xend.
However, when migrating PVM guests with secure vm migration enabled to a destination Oracle VM
Server instance with PVM guests disabled, the following incorrect message is displayed:
stderr: Error: [Errno 9] Bad file descriptor
Workaround: The incorrect migration error message should be ignored. The PVM migration is still
prevented regardless of whether secure vm migration is enabled or not for the server pool where the vm
resides.
For information on how to disable PVM guests on your Oracle VM Server instance, see Disabling
Paravirtualized Guests on Oracle VM Server in the Oracle VM Administrator's Guide. For information on
secure VM migrations when creating a server pool, see the Create Server Pool topic in the Oracle VM
Bug 27679547
9.13 Default VM Start Policy Is Different in Oracle VM Manager

Command Line Interface and Oracle VM Manager Web Interface
In Oracle VM Release 3.4.5, the start policies for virtual machines have changed. At the server pool level,
the Oracle VM Manager Command Line Interface and Oracle VM Manager Web Interface apply a different
default start policy: a server pool created through the web UI uses the "Best Server" policy, while a server
pool created through the CLI uses the "Current Server" policy.
Workaround: There is no functional issue. The difference in behavior between both interfaces will not be
addressed, because changing the default policy may break existing customers' CLI automation. Set the
virtual machine start policy within your server pools as required.
Bug 27805945
9.14 Virtual Machine Fails to Boot with kexec

If you attempt to boot a virtual machine into a different kernel using kexec, the sequence sometimes fails
due to certain devices not loading. Issues have been reported with missing networking or logical volumes,
on a variety of kernel combinations. No root cause has been identified.
Workaround: The issue is intermittent, so you can retry. There is currently no workaround.
Bug 27338786
9.15 Missing Physical Disk Warning for Oracle VM Server Instance

After Upgrading Oracle VM Manager
If you are using Oracle VM Manager Release 3.4.2 or later to manage previous versions of Oracle VM
Server that have not yet been upgraded, warnings about missing physical disks in the internal ZFS storage
95
Suspend Error During Storage Live Migration
appliance may be displayed in the Oracle VM Manager Storage tab and the Physical Disks perspective of
the Servers and VMs tab. For example:
OVMEVT_007005D_000 Discover storage elements on server [ovcacn10r1] did not return
physical disk [SUN (2)] for storage array [OVCA_ZFSSA_Rack1].
Workaround: Upgrade all instances of Oracle VM Server to the same release version of Oracle VM
Manager.
Bug 26320569
9.16 Suspend Error During Storage Live Migration

When migrating running virtual machines that use local storage, the virtual disks are migrated first from
the source server's local repository to the destination server's local repository. In certain cases, during the
storage live migration, a suspend error may occur for the source Oracle VM Server guest virtual machine
when there is additional disk activity. For example, additional disk activity may involve a process that is
running on the guest virtual machine that is writing to the virtual disk on the source server's local repository
while it is being migrated to the destination server's local repository.
The suspend operation requires more time to complete due to the additional disk activity, resulting in a
suspend error that causes the storage live migration to fail. A suspend error similar to the following is
displayed in the /var/log/xen/xend.log on the source Oracle VM Server instance:
[timestamp 2792] DEBUG (XendDomainInfo:3509) waitForSuspend: domain 1 state:
[timestamp 2792] INFO (XendCheckpoint:430) [9836] xc: error:
Suspend request failed: Internal error
[timestamp 2792] DEBUG (XendDomainInfo:1943) XendDomainInfo.handleShutdownWatch
[timestamp 2792] INFO (XendCheckpoint:430) [9836] xc: error: Domain appears not
to have suspended: Internal error
A timeout error is also displayed in the kernel log on the source Oracle VM Server guest virtual machine:
timestamp server kernel: [ 1601.227167] Freezing of tasks failed
after xx seconds (0 tasks refusing to freeze, wq_busy=1):
Workaround: Update the /sys/power/pm_freeze_timeout parameter, which is specified in

milliseconds on the source Oracle VM Server guest virtual machine to ensure adequate time is available
when additional disk activity occurs during storage live migration:
1. Log in to the guest virtual machine.
2. It is strongly recommended to update the pm_freeze_timeout parameter to the maximum downtime

that you can afford, up to a maximum of 5 minutes, or 300000 milliseconds. For example, to update the
/sys/power/pm_freeze_timeout parameter to 5 minutes, run the following command on the guest
virtual machine:
# echo "300000" > /sys/power/pm_freeze_timeout
Note
The value you set for the pm_freeze_timeout parameter impacts the amount
of time the source Oracle VM Server guest virtual machine remains offline
during storage live migration.
3. Perform the live migration with storage again and no suspend errors should occur.
If a suspend error still occurs for the source Oracle VM Server guest virtual machine after the
pm_freeze_timeout parameter is updated, you may need to avoid storage live migration until the
96
Cannot Change Memory Configuration of Running PVHVM Guests Based on CentOS 6
additional disk activity completes, or reconsider the maximum time you can afford for the guest virtual
machine to remain offline during storage live migration.
Bug 26289880
9.17 Cannot Change Memory Configuration of Running PVHVM

Guests Based on CentOS 6
For PVHVM guests based on CentOS 6, the available memory is set to the maximum memory in the virtual
machine configuration when the virtual machine starts. Any operations to modify the memory while the
guest is running complete successfully but do not take effect.
Workaround: Stop the virtual machine and then change the memory configuration.
Bug 26542210
9.18 PVHVM Guests Based on CentOS 5 Do Not Start Successfully

After Conversion from PVM
Note
As of Release 3.4.6, support for PVM guests is removed. For information

information, see Section 8.1, “Removed Features in 3.4.6”.
If you change the domain type of a virtual machine based on CentOS 5 from PVM to PVHVM, and then
attempt to start the virtual machine, it does not boot successfully. The following error displays in the virtual
machine console:
Error 13: Invalid or unsupported executable format
Workaround: There is no workaround for this issue.
Bug 26537271
9.19 PVM Guests Based on CentOS 5 Do Not Start Successfully

After Conversion from PVHVM
Note

If you change the domain type of a virtual machine based on CentOS 5 from PVHVM to PVM, and then
attempt to start the virtual machine, it does not boot successfully. The following error message is displayed:
ELF image has no shstrtab
Bug 26537152
9.20 Guests Based on CentOS 5.11 Start with the Maximum Memory
Configuration
Virtual machines based on CentOS 5.11 start running with a total memory that is equal to the maximum
memory instead of the available memory, as defined in the virtual machine configuration.
97
Guests Based on CentOS 5 Display Incorrect Number of VNICs
Workaround: Change the memory configuration in the running virtual machine.
Bug 26536834
9.21 Guests Based on CentOS 5 Display Incorrect Number of VNICs

If you create a virtual machine based on CentOS 5 and then add a VNIC to the virtual machine, that VNIC
is duplicated when you reboot the virtual machine. For example, if you add one VNIC, duplicate settings
are displayed for the eth0 and eth1 interfaces.
The duplicate VNIC is caused by an issue with the CentOS 5 kernel that loads two drivers for the same
network interface.
Bug 26535868
9.22 Live Migrating Oracle Solaris Guests to Oracle VM Server

Release 3.4.4 or Later Results in Guest Reboot
Live migrating Oracle Solaris HVM or PVHVM 64-bit guests from previous versions of Oracle VM Server
to a destination Oracle VM Server at Release 3.4.4 or later results in an Oracle Solaris guest reboot. The
following message is quickly displayed on the Oracle Solaris guest console, followed by a reboot:
gnttab_maps: Invalid pfn
Workaround: The following migration options are available:
Live migrate Oracle Solaris Note

HVM or PVHVM 64-bit guests to
Oracle VM Server Release 3.4.4 The following points should be reviewed before
or later proceeding with this solution:
• To ensure minimal disruption, it is

recommended to complete the instructions
described in this solution immediately after
upgrading to Oracle VM Server Release 3.4.4
or later and before the Oracle VM Server is
returned to service.
• All Oracle VM Server instances at Release

3.4.4 or later in the server pool must be
updated based on the instructions described in
this solution.
• The configuration setting update described

in this solution will be carried forward during
future Oracle VM Server upgrades.
1. Using the Oracle VM Manager Web Interface, edit the destination Oracle VM Server and place it into
maintenance mode. For more information, see Edit Server.
Note
If you have just upgraded to Oracle VM Server Release 3.4.4 or later, the Oracle
VM Server may already be in maintenance mode.
98
Cannot Remove Software RAID Devices from Oracle VM Manager
2. On the Oracle VM Server instance, open /etc/default/grub for editing.
3. Add gnttab_max_frames=64 to the GRUB_CMDLINE_XEN line.
4. Regenerate the GRUB2 configuration.
• BIOS-based systems:
grub2-mkconfig -o /boot/grub2/grub.cfg
• UEFI-based systems:
grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
5. Reboot the Oracle VM Server instance for the update to take effect.
6. Edit the Oracle VM Server on the Oracle VM Manager Web Interface and take it out of maintenance
mode by unchecking the Maintenance Mode check box.
7. Proceed to live migrate the Oracle Solaris guest to the destination Oracle VM Server instance.
Migrate Oracle Solaris HVM or Note

PVHVM 64-bit guests to Oracle
VM Server Release 3.4.4 or Although live migration of Oracle Solaris guests
later to Oracle VM Server Release 3.4.4 or later is not
possible with this solution, you avoid updating
the configuration setting on the Oracle VM
Server instance and the consequent required
server reboot. In addition, there will be improved
guest performance and the custom parameter
gnttab_max_frames=64 will not need to be
maintained on any future installations of Oracle
VM Server.
1. Before migrating the Oracle Solaris guest to the destination Oracle VM Server, you must stop the virtual
machine guest on the source server.
2. Migrate the Oracle Solaris guest to the destination Oracle VM Server.
3. Once migration completes, restart the Oracle Solaris guest on the destination Oracle VM Server.
For more information, see Migrate or Move Virtual Machines.
Bug 26594820
9.23 Cannot Remove Software RAID Devices from Oracle VM

Manager
You cannot use Oracle VM Manager to remove physical disks that are included in a software RAID. If you
attempt to remove software RAID devices from Oracle VM Manager, the job fails with the following error
message:
OVMRU_007016E: Operation is not supported for local storage.
Workaround: Manually remove the software RAID devices from Oracle VM Server. For more information,
see Removing Software RAID Devices in the Oracle VM Administrator's Guide.
99
VNICs Deleted When Editing Virtual Machine
Bug 25554732
9.24 VNICs Deleted When Editing Virtual Machine

Modifying a virtual machine configuration deletes the VNICs associated with that virtual machine if edit jobs
are in progress. For example, if you modify a virtual machine and then perform a subsequent modification
before the first job completes, the VNICs associated with that virtual machine are deleted.
Workaround: When editing a virtual machine, you must wait until all previous edit jobs complete before
making any further modifications.
Bug 24961613
9.25 Enable High Availability Option is Disabled Due to Restart

Option
If you edit a virtual machine configuration to enable high availability, and the Restart or Restart After
Dump option is set to either Stop or Stop After Dump, the Enable High Availability option is disabled on
the Oracle VM Manager Web Interface.
Workaround: To enable the Enable High Availability option, you must first edit the virtual machine
configuration and set the Restart Action on Crash option to Restart or Restart After Dump and then
save the configuration before you attempt to enable high availability.
Bug 24961613
9.26 Cannot Upgrade Oracle VM Manager Due to Presence of

Temporary Files
When upgrading Oracle VM Manager Release 3.3.3 to Release 3.4.x, the upgrade procedure may fail due
to the presence of temporary files.
Workaround: Delete any temporary files that cause the upgrade failure. For example, run the following
command as the root user on the Oracle VM Manager host:
# rm -Rf /tmp/workdir_sel
# rm -Rf /tmp/ovm*
Once these files are removed, restart the upgrade procedure again.
Bug 25394965
9.27 Job List Excel Spreadsheet Name Contains Unexpected

Characters
In the Oracle VM Manager Web Interface, when you export the job list as a Microsoft Office Excel
spreadsheet, the browser Save/Open File dialog may display the Job List Excel spreadsheet name with
unexpected characters, for example, =_UTF-8_Q_JobList=2Exls_=. This issue occurs if you are using
Microsoft Internet Explorer 11 as your browser, and you are using a language setting other than English.
Workaround: Although the Excel spreadsheet can be successfully downloaded and opened, it is
recommended to remove the unexpected characters and rename the spreadsheet to JobList.xls.
100
Oracle Linux 6 HVM Guest Virtual Machine with Hard Disk of 2TiB in Size Hangs on Boot
Bug 25574313
9.28 Oracle Linux 6 HVM Guest Virtual Machine with Hard Disk of
2TiB in Size Hangs on Boot
You cannot start hardware virtualized (HVM) guests running Oracle Linux 6 if the guest boots from hard
disks of 2TiB in size.
Workaround:
1. Host the contents of the Oracle VM Server ISO image file over the network so that you can access the
required GRUB2 package files.
2. Log in to the Oracle VM Manager Web Interface.
3. Clone the Oracle Linux 6 virtual machine and ensure that it is not attached to a hard disk of 2TiB in
size.
4. Attach the 2TiB hard disk to the cloned virtual machine.
5. Install the grub2 packages on the 2TiB hard disk that you attached to the cloned virtual machine, for
example:
# cd /tmp
# wget --no-proxy /path/grub2-version.rpm
# wget --no-proxy /path/grub2-tools-version.rpm
# mkdir tmp
# cd tmp
# rpm2cpio ../grub2version.rpm | cpio -iumd
# rpm2cpio ../grub2-tools-version.rpm | cpio -iumd
# /usr/sbin/grub2-install -d ./usr/lib/grub/i386-pc/ --force /dev/sdb
Installing for i386-pc platform.
./usr/sbin/grub2-install: warning: this GPT partition label contains no BIOS Boot
Partition; embedding won't be possible.
./usr/sbin/grub2-install: warning: Embedding is not possible. GRUB can only be
installed in this setup by using blocklists. However, blocklists are UNRELIABLE and
their use is discouraged.
Installation finished. No error reported.
Note
• Substitute path with the path to the contents of the Oracle VM Server ISO
image file on your file system.
• Substitute version with the grub2 package version contained in your

Oracle VM Server instance.
• Substitute /dev/sdb with the device name for the 2TiB hard disk that you
attached to the cloned virtual machine.
6. Create the /boot/grub2/grub.cfg configuration as follows:

set default="0"
set timeout=5
menuentry 'Linux' {
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
linux /vmlinuz-version ro root=/dev/mapper/VolGroup-lv_root
initrd /initramfs-version.img
101
Kernel Panic when Assigning More Than 32 virtual CPUs to Oracle Linux 32-bit PVM Guests
Note
Update the vmlinuz and initramfs version accordingly based on the

Oracle Linux 6 version installed.
7. Re-attach the 2TiB hard disk to the virtual machine that you could not boot.
Bug 25655807
9.29 Kernel Panic when Assigning More Than 32 virtual CPUs to

Oracle Linux 32-bit PVM Guests
Note

You cannot assign more than the 32 virtual CPUs to Oracle Linux 32-bit Paravirtualized (PVM) guests
running Oracle Unbreakable Enterprise Kernel (UEK) Release 2. Oracle Linux 32-bit PVM guests running
UEK Release 2 support a maximum of 32 virtual CPUs. If you assign more than the maximum virtual CPUs
allowed, kernel panic may occur.
Workaround: Set the maximum virtual CPUs to 32 or less. Use the uname command to determine the
UEK version you are running on the guest virtual machine and from the result, you can determine the
maximum number of virtual CPUs supported, for example:
# uname -r
2.6.39-400.278.3.el6uek.i686
# cat config-2.6.39-400.278.3.el6uek.i686 | grep CONFIG_NR_CPUS
CONFIG_NR_CPUS=32
Bug 25745578
9.30 Live Migration of Guest Virtual Machine Fails Due to Linux

Kernel Version
Running Linux UEK x86_64 2.6.39-400.109.1.el6 as the guest kernel may cause issues during live
migration. For example, live migration may fail with an unresponsive guest virtual machine on the VNC
Console.
Workaround: Upgrade the guest kernel to the latest version.
Bug 25644455
9.31 PVHVM Guest Boot Delayed by Xen Balloon Driver

Booting PVHVM guests takes longer than expected and the following message is written to stack trace:
INFO: task <task_name>:234 blocked for more than 120 seconds
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
This issue occurs when the virtual machine configuration includes a maximum memory value that is
much larger than the available memory value. This configuration causes the Xen balloon driver to shrink
102
Oracle VM Server Cannot Boot from Software RAID Devices with Disks that are 2TB or Larger
the guest memory to the target size. As a result, the boot time for the virtual machine takes longer than
expected.
Workaround: The greater the difference between the values for maximum memory and available memory,
the longer it takes to boot PVHVM guests. If you encounter this issue, you should either decrease the
maximum memory or increase the available memory in the virtual machine configuration.
Bug 25709221
9.32 Oracle VM Server Cannot Boot from Software RAID Devices

with Disks that are 2TB or Larger
You should not attempt to install Oracle VM Server on a software RAID if a disk that is 2 TB or larger is
a member of the array. Due to a limitation with the Master Boot Record (MBR), Oracle VM Server cannot
boot from disks that are 2 TB or larger in a software RAID configuration.
Bug 25608136
9.33 Oracle VM Server Does Not Boot After Installation to LUN

Targets Larger Than 2TB
In some cases, Oracle VM Server does not have a valid boot entry after installation to Fibre Channel or
Fiber Channel over Ethernet (FCoE) LUNs. As a result, Oracle VM Server cannot boot successfully. This
issue affects both BIOS and UEFI-based environments and is the result of outdated firmware for the host
bus adapter (HBA) or other host controller on the target server.
As of Release 3.4.3, support for installation of Oracle VM Server to systems where Fibre Channel or FCoE
LUNs are greater than 2TB in size applies to the following tested versions only:
Server Host Adapter or Controller Part Number Firmware BIOS or

version UEFI
Oracle Server X4-4 Sun StorageTek Dual 8 Gb SG-XPCIE2FC- 8.05.00 UEFI
Fibre Channel PCIe HBA QF8-Z
Oracle Server X5-2 Sun Storage 16 Gb Fibre 7101674 8.05.00 UEFI
Channel PCIe Universal
HBA, QLogic
Oracle Server X5-4 Sun Storage 16 Gb Fibre 7101684 11.1.160.6 BIOS and
Channel PCIe Universal UEFI
HBA, Emulex
Oracle Server X5-8 Sun Storage 16 Gb Fibre 7101674 8.05.00 UEFI
Channel PCIe Universal
HBA, QLogic
Note
• Legacy BIOS SAN boot is not supported for Fibre Channel or FCoE LUNs that
are greater than 2TB in size for QLogic HBA or other host controllers on the
target server.
103
Oracle VM Server Boot Delay and I/O Error Messages with Oracle ZFS Storage Array
• UEFI SAN boot for Qlogic HBA or other host controllers are supported, but the
firmware for the HBA or other host controllers on the target server may need to
be updated.
• Both Legacy BIOS and UEFI SAN boot for HBA or other host controllers, such as
Emulex are supported, but the firmware for the HBA or other host controllers on
the target server may need to be updated.
Workaround: Update the firmware for the host bus adapter (HBA) or other host controller on the target
server.
Bug 25701247
9.34 Oracle VM Server Boot Delay and I/O Error Messages with
Oracle ZFS Storage Array
A known issue with the Oracle ZFS SCSI storage driver causes significant delays during Oracle VM Server
boot and writes a large number of I/O error messages to the kernel log. This issue occurs because the
storage driver loads before the SCSI device handler modules (scsi_dh) are available. As a result, the
system issues I/O operations to SCSI multipath devices before the devices can handle them.
Workaround: Add the SCSI device handler modules (scsi_dh) to the kernel command line parameters
as follows:
1. Open /etc/default/grub for editing.
2. Add rdloaddriver=scsi_dh_alua to the GRUB_CMDLINE_LINUX line.
3. Regenerate the GRUB2 configuration.
• BIOS-based systems:
• UEFI-based systems:
grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
Bug 25686610
9.35 FIPS Integrity Error Message for SSH Connections from Oracle
VM Server
If you are logged in to Oracle VM Server and you establish an SSH connection to another system, the
following message is displayed:
FIPS integrity verification test failed.
This message indicates that Oracle VM Server cannot enable FIPS mode for outbound SSH connections.
However, Oracle VM Server can still establish an SSH connection to the remote system but that
connection is not validated by FIPS cryptographic algorithms.
Bug 25831585
104
Incorrect MAC Address Displayed for Bond Port
9.36 Incorrect MAC Address Displayed for Bond Port

In some cases, Oracle VM Manager displays an incorrect MAC address for bond ports instead of the MAC
address assigned for the bond port on Oracle VM Server for SPARC.
Workaround: Ensure the bond port is up by running the dladm show-aggr -x command on the primary
domain of the SPARC server, and then rediscover the instance of Oracle VM Server for SPARC.
Bug 25768560
9.37 Kernel Panic when Booting Guest Virtual Machine with 100 or
more Virtual Disks
Adding 100 or more virtual disks to a guest virtual machine and then booting the virtual machine with a
UEK2, UEK3, or UEK4 kernel results in a kernel panic, as the virtual machine does not recognize all the
virtual disks and loses network connectivity.
Workaround: For more information on this issue and the workaround, see Oracle VM: VM Guest With
100+ Virtual Disks Does Not Recognize Them All And Loses Connectivity Document ID 2038050.1, on My
Oracle Support at: https://support.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=2038050.1.
Bug 24428913
9.38 Different Default Values for the serverAffinityType when

Creating Anti-Affinity Groups
When you create an anti-affinity group, the default value for the affinity group type that is returned for the
getServerAffinityType method is different, depending on whether you create the anti-affinity group in
the Oracle VM Manager Web Interface or the Oracle VM Web Services API. If you create the anti-affinity
group in the Oracle VM Manager Web Interface, the server affinity type is set to ANTI_AFFINITY . If you
create the anti-affintity group using the Oracle VM Web Services API, the server affinity type is set to
NO_AFFINITY .
Bug 23542910
9.39 Performance Impact when Less than 8 CPUs Configured for

dom0
For best performance, if dom0 is configured with less than 8 CPUs, the xen_netback max_queues
option in the ovs.conf file should be set to the number of CPUs configured for dom0. For example, if you
configure dom0 with 6 CPUs, then you should set the value of the xen_netback max_queues option to
6.
Workaround:
1. Start an ssh session to Oracle VM Server.
2. Open /etc/modprobe.d/ovs.conf for editing.
3. Set the value of the xen_netback max_queues option equal to the number of CPUs configured for
dom0.
105
Upgrading Oracle VM Server from Release 3.2.10 to 3.3.4 and then to 3.4.2 fails
4. Reboot Oracle VM Server for the setting to take effect.
Bug 24329130
9.40 Upgrading Oracle VM Server from Release 3.2.10 to 3.3.4 and

then to 3.4.2 fails
When upgrading Oracle VM Server Release 3.2.10 to Release 3.4.2, and your upgrade path is from
Release 3.2.10 to 3.3.4 and then to Release 3.4.2, the upgrade fails with the following message:
kernel-uek-firmware-2.6.39-400.249.3.el5uek.noarch has missing requires of aic94xx-firmware
Workaround: After upgrading to Oracle VM Server Release 3.3.4, remove the kernel-uek-
firmware-2.6.39-400.249.3.el5uek.noarch rpm package before upgrading to Release 3.4.2. For
example, run the following command to delete the rpm package:
# rpm -e --justdb kernel-uek-firmware-2.6.39-400.249.3.el5uek.noarch
Bug 24665394
9.41 Logical Volume Manager (LVM) is enabled on Oracle VM Server

Release 3.4.1
By default, Logical Volume Manager (LVM) should not be enabled. However, in Oracle VM Server Release
3.4.1 LVM is not disabled correctly. As a result, LVM disks are inadvertently activated. This setting also
applies to Oracle VM Server instances that you upgrade from Oracle VM Server Release 3.4.1.
Workaround: Disable LVM on Oracle VM Server. If you plan to upgrade to a later version, you should
complete these steps before upgrading:
1. Start an ssh session to Oracle VM Server Release 3.4.1.
2. Open /etc/lvm/lvm.conf for editing.
3. Locate the global { section of the file and comment out the global_filter = [ "r/.*/" ]
setting option, so it is displayed as follows:
# For OVS, don't even open any device
# global_filter = [ "r/.*/" ]
4. Locate the devices { section of the file. Uncomment the global_filter = [] setting and update
it as follows:
# Since "filter" is often overridden from command line, it is not suitable
# for system-wide device filtering (udev rules, lvmetad). To hide devices
# from LVM-specific udev processing and/or from lvmetad, you need to set
# global_filter. The syntax is the same as for normal "filter"
# above. Devices that fail the global_filter are not even opened by LVM.
global_filter = [ "r/.*/" ]
5. Save and close the file.
6. If LVM disks are activated, you must manually deactivate them or reboot Oracle VM Server for the
updates to take effect.
7. If LVM disks are not activated, no further action is required.
Bug 24583291
106
Btrfs Root File System Not Supported on PVM Guest Virtual Machines
9.42 Btrfs Root File System Not Supported on PVM Guest Virtual
Machines
Note

Btrfs root file system is not supported on x86-based PVM guest virtual machines. For example, updating
the domain type of PVHVM guests running on SUSE Linux Enterprise Server 12 SP2 or later to PVM
results in the virtual machine failing to start-up. This occurs as btrfs is the default file system on SUSE
Linux Enterprise Server 12 SP2 or later operating system.
Bug 25040512
9.43 SUSE Linux Enterprise Server 12 SP2 and Later Not Supported
For PVM Guest Virtual Machines
Although SUSE Linux Enterprise Server 12 SP2 or later is supported for both hardware virtualization
(HVM) and hardware virtualization with paravirtual drivers (PVHVM), it is not possible to run this operating
system as a paravirtualized domain (PVM). This is due to the default btrfs file system on SUSE Linux
Enterprise Server 12 SP2 or later not being supported on PVM.
Bug 25040512
9.44 Cannot Connect to the Oracle VM Manager Web Interface with

Microsoft Internet Explorer
In some cases, if you attempt to connect to the Oracle VM Manager Web Interface with Microsoft Internet
Explorer version 10 or lower, the Oracle VM Manager Web Interface does not respond when you enter
login credentials. No messages are written to the AdminServer.log file to indicate errors or provide
debugging information.
Workaround: Do one of the following:
• Reset Internet Explorer settings.
• Use Internet Explorer version 11 or a different browser, such as Mozilla Firefox, to connect to the Oracle
VM Manager Web Interface.
Bug 20691432
9.45 The Virtual Machine Console Window in the Oracle VM Manager

Web Interface Opens in the Background when using Microsoft
Internet Explorer
The virtual machine VNC or serial console windows, that can be opened from within the Oracle VM
Manager Web Interface, may initially open in the background and not have immediate focus when using
Microsoft Internet Explorer. This means that after you click on the menu option to open a console dialog,
107
Inconsistent Value for SPARC Domain Type
it initially appears as if nothing has happened as the main browser window remains in the foreground.
However, the console window has opened but is in the background. This is the result of a bug in the
underlying framework that is used for the development of the Oracle VM Manager Web Interface.
• Check in the Windows task bar to determine whether another window has been opened in the
background, or use the Alt-Tab key combination to cycle through open windows.
• Use a different browser, such as Mozilla Firefox or Chrome to connect to the Oracle VM Manager Web
Interface.
Bug 21235816
9.46 Inconsistent Value for SPARC Domain Type

In the Oracle VM Manager Web Interface, you can select OVM/SPARC as a value for the Domain Type
option used to create or edit a virtual machine. In the Oracle VM Manager Command Line Interface, and
in the Oracle VM Web Services API, the value for the DomainType option can be set as LDOMS_PVM.
These two values should be understood to be equivalent and refer to the hypervisor that is available on an
Oracle VM Server for SPARC.
You are unable to use these values interchangeably and must use the correct value for the interface that
you are using to configure the virtual machine. Check the appropriate documentation if you are unsure of
the values that can be set for this option.
Bug 20786024
9.47 Integer Only Values for the statValue Option

In the Oracle VM Manager Command Line Interface, you must use only integers to specify values for the
statValue option when using the equalityType option for the getStatListByQuery command.
Floats and decimals are not supported values for the statValue option.
Bug 21046910
9.48 Aborting a Server Discovery Operation Results in Server Listed

with an Unknown Operational State
Aborting a server discovery operation within Oracle VM Manager can result in the server being listed within
the Oracle VM Manager Web Interface with an unknown operational state. Equally, the server object may
appear as locked within the Oracle VM Manager Web Interface. This is because events triggered by the
discovery operation may cause the state of the Oracle VM Manager Web Interface to fall out-of-sync with
the actual state of the environment.
Workaround: To correct the operational state returned by Oracle VM Manager, rediscover any Oracle VM
Servers that are affected. If you wish to remove these servers, delete them after you have performed the
discovery operation.
Bug 21495833, 21495187
108
Automatic Discovery Operations can Conflict with Server Configuration Operations
9.49 Automatic Discovery Operations can Conflict with Server

Configuration Operations
In certain rare cases, an automatic server rediscovery is triggered by an error condition at the same time
that a server configuration operation is taking place. In this situation, it is possible that this conflict can
result in configuration information specific to the Oracle VM Server falling out-of-sync with the information
reflected by Oracle VM Manager.
Workaround: To correct the information returned by Oracle VM Manager, rediscover any Oracle VM
Servers that are affected.
Bug 21341236
9.50 Solaris 11 x86 Virtual Machine Disk Type Can Cause Kernel
Panic on Boot
On Oracle VM, Solaris 11 x86 virtual machines are all installed and run with Xen Virtual Disk (XVD) disks
by default. Exporting a Solaris 11 x86 virtual machine as a virtual appliance (OVA), and then importing
it to a virtualization platform that supports a different disk type or disk controller, changes the path to the
boot disk for the virtual machine. As a result, a kernel panic occurs for the Solaris 11 x86 virtual machine
because it cannot locate the boot disk.
Workaround: Use the Solaris 11 x86 live installation ISO to boot the Solaris virtual machine. When the live
installation GUI displays, open a terminal window and change to the root user. Run zpool import -f
rpool and then run shutdown. After the virtual machine shuts down, remove the live installation ISO and
boot from the disk.
Bug 21253581
9.51 Solaris 10 x86 Virtual Machine Installation Fails To Boot

On Oracle VM, virtual machines that are installed with Solaris 10 directly from the installation ISO may fail
to boot immediately after installation and can return the error: 'Bad PBR Sig'.
This bug is related to the way in which virtual disks are referenced in the virtual machine configuration file,
where they are configured as Xen Virtual Disk (XVD) disks by default. For Solaris to recognize this disk
type, a patch needs to be applied to the Solaris installer to recognize the new disk type and to allow it to
write to the boot block of the disk. This patch can been applied for network installs, but is not applied to the
installation ISO, therefore additional steps must be taken when performing an installation from the ISO.
Workaround: The workaround provided here has been tested for Solaris 10u11. If you require that you
complete an installation of Solaris 10u11 from ISO, it is possible to rectify the issue described here by
performing the following steps:
• Reboot the virtual machine and use the ISO to perform the boot.
• During the boot process select the option to go to command line mode (option 6).
• At the command prompt, run installgrub to manually install the grub loader to the boot partition, as
follows:
/a/sbin/installgrub -m /a/boot/grub/stage1 /a/boot/grub/stage2 /dev/rdsk/c1t0d0s0
Substitute c1t0d0s0 with your device as appropriate.
109
Oracle Linux 7 Virtual Machines Imported from a VirtualBox Virtual Appliance Do Not Start on Oracle VM
• Reboot the virtual machine and the installation completes.
Solaris 11 is unaffected by this issue.
Bug 21775043
9.52 Oracle Linux 7 Virtual Machines Imported from a VirtualBox

Virtual Appliance Do Not Start on Oracle VM
Virtual machines running Oracle Linux 7 exported from Oracle VirtualBox as a virtual appliance and then
imported into Oracle VM may not boot correctly and may exit to an emergency shell. This is caused by
a missing xen-blkfront driver in the initramfs image. Typically, output during boot, for affected systems,
appears as follows:
[ OK ] Reached target Basic System.
dracut-initqueue[227]: Warning: Counld not boot.
dracut-initqueue[227]: Warning: /dev/mapper/ol-root does not exist
dracut-initqueue[227]: Warning: /dev/ol/root does not exist
dracut-initqueue[227]: Warning: /dev/ol/swap does not exist
Starting Dracut Emergency Shell ...
Warning: /dev/mapper/ol-root does not exist
Warning: /dev/ol/root does not exist
Warning: /dev/ol/swap does not exist
Workaround: There are two workarounds to this problem. The first involves adding the missing drivers
prior to exporting the Oracle Linux 7 virtual machine from Oracle VirtualBox. To do this, run the following
command as root before you perform the export:
# dracut --add-drivers "xen-blkfront xen-netfront" --force
If you are unable to perform this step prior to the export, you can temporarily boot the virtual machine as an
HVM and add the following boot option in GRUB prior to boot:
xen_emul_unplug=never
Once the virtual machine has booted, you can add the missing drivers by running the following command
as root:
# dracut --add-drivers "xen-blkfront xen-netfront" --force
Reboot the virtual machine once the drivers have been added to the initramfs.
Bug 21244825
9.53 (x86 Only) IOStat Stays at 100% Util for Oracle Linux Virtual
Machines After a Storage Migration
When a virtual machine running a kernel prior to UEK 3.8.13-68.2.1 is migrated from a local repository
using the 'live migrate with storage' option, and all IO has been terminated, the IOStat on the virtual
machine remains stuck at 100% Util.
This is related to a kernel bug where a call to the Xen blkfront driver caused the IO statistics to not be
properly refreshed after a migration was completed, causing the accounting to fall out of sync with actual
IO activity.
Workaround: This bug is resolved in UEK 3.8.13-68.2.1 and greater. To avoid this issue, upgrade the
kernel used by your virtual machine.
110
Serial Console Does Not Respond for Oracle Linux 7 HVM Virtual Machines
Bug 21614184
9.54 Serial Console Does Not Respond for Oracle Linux 7 HVM
Virtual Machines
The serial console does not respond, or provide any output, for virtual machines based on Oracle Linux 7
that are of domain type HVM or PVHVM.
Workaround: Configure the GRUB bootloader for the virtual machine as follows:
1. Add the following lines to the /etc/default/grub file:

GRUB_CMDLINE_LINUX=" console=ttyS0 console=tty0 crashkernel=auto \
rd.lvm.lv=ol/root rd.lvm.lv=ol/swap rhgb quiet"
GRUB_TERMINAL="serial console"
GRUB_SERIAL_COMMAND="serial --unit=0"
2. Run the following command to update the grub.cfg file:

3. Restart the virtual machine.
Note that the preceding lines provide suggested configuration. You should consult the GNU GRUB
manual for descriptions of each line and additional configuration options to suit your business needs.
The GNU GRUB manual is available from the following directory on the virtual machine: usr/share/
doc/. Additionally, you should refer to the About the GRUB2 Boot Loader section of the Oracle Linux
Administrator's Guide for more information.
Tip
Use the following keys to navigate the boot menu: v for down-arrow and ^ for up-
arrow.
Bug 21229730
9.55 Error When Attaching CD-ROM Drives to Running HVM Virtual

Machines
If you attempt to attach a CD-ROM drive to an available slot on a running virtual machine of domain type
HVM, an error occurs and it is no longer possible to use the specified slot. For example, after you attempt
to attach a CD-ROM drive to slot 2, you then attempt to attach a virtual disk to slot 2. In both cases an error
occurs and slot 2 becomes unusable.
This issue occurs because running HVM virtual machines do not support the function to attach CD-ROM
drives.
Workaround: Stop the virtual machine and then attach the CD-ROM drive.
Bug 21300944
9.56 Deleting Bond Ports for VLANIF Interfaces Deletes the VLANIF
Deleting a bond port that is in use by a VLANIF interface configuration also deletes the VLANIF interface.
111
(SPARC Only) NFSv4 Delegation Interferes with Cluster Heartbeat,
Using NFSv3 Results in RPC Error PROGRAM/VERSION MISMATCH
Bug 21217364
9.57 (SPARC Only) NFSv4 Delegation Interferes with Cluster

Heartbeat, Using NFSv3 Results in RPC Error PROGRAM/VERSION
MISMATCH
Server pool clustering on SPARC based server pools can cause servers to automatically fence due to
NFSv4 write delegation revocation timeouts which exceed the timeout value for the cluster.
It is not possible to use NFSv3 as this results in an RPC error reporting a "PROGRAM/VERSION
MISMATCH" and can cause the cluster database to hang due to the NFSv3 locking mechanism. This is
expected behavior.
Workaround: There is no workaround for this issue. Only NFSv4 is supported for SPARC clustering, and
you must disable delegation for this to work.
Bugs 18997487, 20443098, 21317571
9.58 Cannot Import OVF Files into Oracle VirtualBox

You cannot successfully import a virtual appliance into Oracle VirtualBox if you exported that virtual
appliance from Oracle VM as an extracted OVF that includes three separate files, a package.ovf file, a
package.mf file, and a disk.vmdk file.
Workaround: Delete the package.mf file before you import the virtual appliance into Oracle VirtualBox.
Alternatively, export the virtual appliance from Oracle VM as an OVA file.
Bug 21261077
9.59 Oracle VM Manager Cannot Receive Messages from SPARC

Virtual Machines
After sending messages to a virtual machine running on Oracle VM Server for SPARC to configure network
settings, Oracle VM Manager does not receive messages that indicate that the network was configured
successfully.
Bug 21062991
9.60 Cannot Boot Oracle VM Server Installed on an HP DL380 Gen9

Server in UEFI mode
In some cases, after you install Oracle VM Server on an HP DL380 Gen9 server in UEFI mode, you cannot
successfully boot Oracle VM Server. This is the result of an issue with HP Smart Array firmware versions
lower than 2.52.
Workaround: Update the HP Smart Array firmware to version 2.52 or higher.
Bug 21466879
112
(x86 Only) Cannot Boot Oracle VM Server with Broadcom 57840S CNA Card After PXE Install
9.61 (x86 Only) Cannot Boot Oracle VM Server with Broadcom

57840S CNA Card After PXE Install
If you perform a network installation of Oracle VM Server on an x86 system using the Broadcom 57840S
CNA Card, you are unable to boot using FCoE. This issue is the result of a bug in the anaconda installer,
where the installer is unable to see all of the disks when the system is booted using PXE.
Workaround: Do not use PXE boot to install systems that make use of this hardware.
Bug 20830496
9.62 Changing to Dynamic Mode IP Address Assignment Does Not

Rollback if the Server is Unable to Obtain an IP Address
If you choose to change the IP address assignment mode to 'Dynamic' for any Oracle VM Server network
interface or port within Oracle VM Manager, the operation that is triggered is a multi-step operation. First,
the network configuration is changed on the server and within the Oracle VM Manager database. Then the
server attempts to obtain an IP address from the DHCP server. If this second operation fails, the server
returns an error but the Oracle VM Manager is unable to rollback the initial operation. The result is that the
server remains configured for DHCP but the port does not have an IP address assigned.
If the port is used for the Management Network, it is possible that the server is no longer accessible to the
Oracle VM Manager and you must correct the networking manually on the server. This may require you to
reissue a DHCP request by running the dhclient command on the command line of the server, or it may
require that you reconfigure the network interface with a static IP address and network mask. You may do
this temporarily using the ip addr command on the command line. Once your server has an IP address
within the management network range, you must rediscover the server.
Workaround: There is no workaround for this issue. You must ensure that your infrastructure is fully
functional and that servers are able to obtain IP addresses from the DHCP server if you choose to use
Dynamic Mode for IP address assignment for a server. Alternately, use Static IP addressing.
Bug 21370280
9.63 Drag and Drop from Blank Space of Object

It is not possible to drag and drop one or more virtual machines or Oracle VM Servers if you select the text
area of the object or the expansion arrow next to the object.
Workaround: Select an area of blank space in the object to drag and drop that object.
Bug 21687716
9.64 Error When Using the Administrator Tool in Parallel

If two or more users connect to the same instance of Oracle VM Manager and simultaneously attempt
to create users with the Oracle VM Manager Administrator Tool (ovm_admin), an error occurs and the
following message is written to AdminServer.log:
Problem invoking WLST - Traceback (innermost last): File
"/u01/app/oracle/ovm-manager-3/ovm_wlst/jython/ovm/admin/createuser.py"
Workaround: Ensure that only one user at a time connects to Oracle VM Manager to use the Oracle VM
Manager Administrator Tool (ovm_admin).
113
Oracle VM Manager Command Line Interface TCP Port Conflicts With Port Reserved for NDMP
Bug 21679271
9.65 Oracle VM Manager Command Line Interface TCP Port Conflicts

With Port Reserved for NDMP
The Oracle VM Manager Command Line Interface uses TCP port 10000 by default. This port is usually
reserved for the Network Data Management Protocol (NDMP).
Workaround: Change the default port for the Oracle VM Manager Command Line Interface if you require
TCP port 10000 for other applications that use NDMP, see SSH Port in the Oracle VM Manager Command
Line Interface User's Guide.
Bug 21960034
9.66 When A Virtual Machine Using A Shared Virtual Disk Is Moved

To Another Repository, The Shared Virtual Disk Is Cloned
When a virtual machine that is using a shared virtual disk is moved to another repository, the shared virtual
disk is cloned during the move process to allow the virtual machine to continue to use the resources on
the shared virtual disk. This may not be the behavior that you expect when you move a virtual machine
and could result in duplicated data resources that could eventually become unsynchronized and difficult to
reconcile.
This design decision allows virtual machines to be restarted after a move with minimum impact as all
used resources continue to be available. However, the behavior is not intuitive and may be modified in
subsequent releases.
Workaround: Be aware of the existing behavior and detach any shared disks before moving the virtual
machine. If the virtual machine needs to make use of resources on the shared disk, detach the shared disk
from all virtual machines and move it separately before reconfiguring your virtual machine to use it again.
Make sure that all virtual machines that require access to the same shared disk are located in the same
repository.
Bug 21316001
9.67 Unable to Remove a Storage Array if a File System Exists on a

LUN
In the case where a repository is hosted on a LUN on a storage array and ownership of the repository
is released, a rule violation is reported if you attempt to delete the storage array. This issue only affects
storage arrays. File servers are unaffected.
Workaround: To resolve this issue you must completely unconfigure the elements of the storage array
before attempting to remove it. Remove ownership of any repositories hosted on the storage array, remove
the storage server from any access groups and finally delete the storage array.
Bug 22313650
9.68 Cluster Failure After An Offline Server is Removed From the

Cluster While Another Cluster Member is Offline
If more than one Oracle VM Server within a clustered server pool is offline at the same time, and one of
those servers is removed from the server pool, when the other offline servers come back online, the cluster
114
LSI Logic / Symbios Logic MegaRAID SAS 1078 is not supported on Oracle VM Server
remains in a failed state. This is because the cluster configuration falls out of sync across the members of
the cluster.
Whenever a server is added or removed from a cluster, Oracle VM Manager triggers an operation on each
Oracle VM Server in the cluster to update the cluster configuration information. However, if any servers
are offline at this time, they are unable to receive the updated configuration resulting in a configuration
mismatch between the cluster configuration on the server and the actual configuration for the rest of the
cluster. As a result, the server is no longer able to participate in the cluster.
On an x86 platform, this situation is simply represented within Oracle VM Manager and can be easily
resolved from within Oracle VM Manager. On a SPARC platform, this can cause a server to repeatedly
reboot when it comes online again due to a cluster panic.
Workaround (SPARC): In the case where a SPARC server is rebooting continuously, the problem is
caused by the server attempting to rejoin the cluster even though it is no longer a member of the cluster.
As a result, the server can panic repeatedly with a message similar to the following:
panic[cpu5]/thread=2a102a13c60:
**** dlm FENCING this system by PANICing
If this issue occurs and a server is repeatedly panicking then you can prevent the server from panicking
again by stopping the ovs-agent service and deconfiguring the cluster. To do so, connect to the server as
root and run the following commands:
# svcadm disable -s ovs-agent
# dlmcconf -S
If you are unable to run these commands because the server is panicking too quickly, then boot the server
in single-user mode:
ok boot -s
Disable the ovs-agent service:

# svcadm disable ovs-agent
Reboot the server. The server stops panicking while the ovs-agent service is disabled. If you want to re-
enable the ovs-agent service, then you must resolve the cluster configuration issue first.
Once you have resolved the cluster configuration issue, you can acknowledge the server cluster failure
event within Oracle VM Manager to resume normal operations.
Workaround (x86): To restore the environment to normal operation, you must first acknowledge the server
cluster failure event within Oracle VM Manager. Remove any servers from the server pool that were offline
when you made the configuration change, and then add them back to the server pool, so that the cluster
configuration information can be properly refreshed for that server.
Bug 22304185, 18776654
9.69 LSI Logic / Symbios Logic MegaRAID SAS 1078 is not

supported on Oracle VM Server
Oracle VM Server may not be able to detect disks on systems using the Dell PowerEdge Expandable RAID
Controller 5 which uses LSI Logic/Symbios Logic MegaRAID SAS 1078. This is due to the unavailability
of compatible driver firmware to enable device support within UEK4 from the hardware manufacturer. You
may not be able to successfully upgrade servers using this hardware to Oracle VM Server 3.4.1 or above.
There are no workarounds for this issue. You must upgrade your hardware.
115
(SPARC Only) Hot-added CD-ROM Device is Detected As Hard Disk
Bug 21843131, 21223382
9.70 (SPARC Only) Hot-added CD-ROM Device is Detected As Hard

Disk
If you hot add a virtual CD-ROM device to a virtual machine running on Oracle VM Server for SPARC, the
CD-ROM device is not detected as a removable device and is not shown when you run the rmformat or
format commands. Instead, the device is listed as a virtual disk and is mapped this way as a device alias.
This can be verified using the OpenBoot PROM to run the show-disks and devalias commands.
Workaround: There is no workaround to this issue. Remain aware that when hot-adding a virtual CD-ROM
device, this is detected as a virtual disk instead and is mapped in Solaris as a /dev/dsk/c1dXsX entry.
Bug 21278127
9.71 Fibre Channel LUNs Missing From Oracle VM Manager After

Refresh
In some instances, after you refresh physical disks in the Storage tab in Oracle VM Manager Web
Interface, fibre channel LUNs might not be included in the refresh. As a result, the LUNs appear to be
missing even though they are online at the server.
Workaround: You should first examine all components of the infrastructure, such as switches, cables, and
HBAs, to ensure that no defects or failures exist. If, after a subsequent refresh, the LUNs still appear to be
missing, you can perform the following steps to resolve this issue:
1. List all attached SCSI devices.

# lsscsi
[0:0:0:0] disk HP LOGICAL VOLUME 1.34 /dev/sda
[0:0:0:1] disk HP LOGICAL VOLUME 1.34 /dev/sdb
[0:3:0:0] storage HP P440ar 1.34 -
[1:0:0:0] disk SUN ZFS Storage 7330 1.0 /dev/sdc
[1:0:0:1] disk SUN ZFS Storage 7330 1.0 /dev/sdd
[1:0:0:2] disk SUN ZFS Storage 7330 1.0 /dev/sde
[1:0:1:0] disk SUN ZFS Storage 7330 1.0 /dev/sdf
[1:0:1:1] disk SUN ZFS Storage 7330 1.0 /dev/sdg
[1:0:1:2] disk SUN ZFS Storage 7330 1.0 /dev/sdh
[1:0:2:1] disk NETAPP LUN 7330 /dev/sdo
[1:0:2:2] disk NETAPP LUN 7330 /dev/sdp
[1:0:2:3] disk NETAPP LUN 7330 /dev/sdq
2. Change to the SCSI address of the affected LUNs.
Based on the preceding example, you can enter rport-1:0-2 to cover [1:0:2:1], [1:0:2:2], [1:0:2:3],
and so on.
# cd /sys/class/fc_remote_ports/rport-1:0-2/
3. Check the timeout value of the fast_io_fail_tmo option.

# cat fast_io_fail_tmo
5
4. Increase the timeout value to just over the amount of time it takes for the LUN to return to the running
state. The value that you set should be less than the value of the dev_loss_tmo option in the same
directory. You should need to change only one of the affected LUNs.
116
(SPARC Only) Size of Physical Disk in Oracle VM Manager Incorrect When LUN Size is Decreased on Storage Array
# echo 15 > fast_io_fail_tmo
5. Add the command to /etc/rc.local to make the change permanent.

# cat /etc/rc.local
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
echo 15 > /sys/class/fc_remote_ports/rport-1:0-2/fast_io_fail_tmo
Bug 22322461
9.72 (SPARC Only) Size of Physical Disk in Oracle VM Manager

Incorrect When LUN Size is Decreased on Storage Array
In the event that a LUN is resized directly on the storage array and that LUN is used by an Oracle VM
Server for SPARC, the size of the LUN may not be correctly updated in Oracle VM Manager if the LUN
size was decreased. This is due to the mechanism that the Oracle VM Agent for SPARC uses to obtain
and report on the LUN size, which does not update once the disk is mapped on the server.
This problem does not occur when the LUN size is increased.
Workaround: The reported LUN size can be updated by rebooting the Oracle VM Server for SPARC
where the LUN is mapped as a physical disk after you have resized the LUN. Once the server is back
online, you must refresh the storage array where the affected LUN is located. The correct size is displayed
for the LUN within Oracle VM Manager.
Bug 22087392
9.73 The Apparent Size of a Repository in Oracle VM Manager Web

Interface Does Not Update Automatically
The apparent size of a repository filesystem is displayed in the Oracle VM Manager Web Interface on the
Repositories tab in the Info perspective for a selected repository. This information is a statistical value
that is updated periodically within Oracle VM Manager but which is not updated automatically within the
table within the Oracle VM Manager Web Interface. The information displayed for this value matches the
information available within Oracle VM Manager at the time that the page loads.
Workaround: To refresh the information displayed for the apparent size of a repository within the Oracle
VM Manager Web Interface, you may click on an alternate tab and then return to the view of the repository
to force the page to refresh.
Bug 22147488
9.74 Virtual Disks Do Not Display on Solaris 10 Guests

If you add virtual disks to a Solaris 10 virtual machine that is stopped, those virtual disks do not display
when you list the virtual disks for the virtual machine.
Workaround: This is a Solaris 10 issue that you can resolve as follows:
1. Start the virtual machine.
117
Oracle Linux 5 Virtual Machines Converted from Physical Hosts Do Not Boot
2. Run the following command on the virtual machine: devfsadm -v
Bug 22460766
9.75 Oracle Linux 5 Virtual Machines Converted from Physical Hosts

Do Not Boot
In some cases, virtual machines based on Oracle Linux 5 do not boot when started. This can occur if
you used the P2V utility to convert a physical host based on Oracle Linux 5 to a virtual machine and then
imported that virtual machine to Oracle VM Manager.
Unbreakable Enterprise Kernel version kernel-uek-2.6.32-100.34.1 adds support for paravirtualized

drivers in a HVM guest on Oracle VM. Starting with this kernel version, the default is to present only
paravirtualized drivers when running in a hardware virtualized guest. To run kernel-uek, including the
drivers, fully hardware virtualized, an additional kernel boot parameter xen_emul_unplug=never must
be added to the boot parameters in /etc/grub.conf.
Workaround: Add the kernel boot parameter as follows:

kernel /vmlinuz-2.6.32-100.34.1.el5uek ro root=/dev/VolGroup00/LogVol00 xen_emul_unplug=never
Bug 22285006
9.76 SSL Exception in AdminServer Log File

In rare cases, the following SSL exception is written to AdminServer.log after attempting to perform an
operation on a virtual machine:
<Error> <ovm.mgr.ras.WebSocketHandler>
<SSLException, writeNWBuf: java.nio.HeapByteBuffer[pos=0 lim=27 cap=16971] is
not large enough for SSLEngine.unwrapAndHandleResults, results: Status =
BUFFER_OVERFLOW HandshakeStatus = NOT_HANDSHAKING
bytesConsumed = 0 bytesProduced = 0
java.io.IOException: SSLException, writeNWBuf: java.nio.HeapByteBuffer[pos=0
lim=27 cap=16971] is not large enough for SSLEngine.unwrapAndHandleResults,
results: Status = BUFFER_OVERFLOW HandshakeStatus = NOT_HANDSHAKING
bytesConsumed = 0 bytesProduced = 0
Workaround: This exception is due to a known issue with Oracle WebLogic Server. You can ignore
the exception. Subsequent attempts to edit or perform an operation on the virtual machine should be
successful.
Bug 22451280
9.77 Oracle VM Servers in a Server Pool Must Be at the Same Minor

Version
Each instance of Oracle VM Server in a server pool must be at the same minor version. In other words,
all servers in a server pool must be at Release 3.2.x, or Release 3.3.x, or Release 3.4.x. For example,
a server pool cannot contain one or more instances of Oracle VM Server Release 3.3.1 and one or more
instances of Oracle VM Server Release 3.2.10.
During an upgrade, each instance of Oracle VM Server in the server pool is upgraded separately, which
results in a mixed version server pool until the upgrade process is complete. For this reason, mixed version
server pools are supported only during an upgrade of Oracle VM Server.
118
Oracle VM Manager Displays Incorrect Details for ZFS Storage Appliances After Cluster Failover
Bug 22516403
9.78 Oracle VM Manager Displays Incorrect Details for ZFS Storage

Appliances After Cluster Failover
In environments where two or more ZFS storage appliances are in an active/active cluster configuration,
and a cluster failover occurs, it is possible for Oracle VM Manager to display incorrect IP addresses and file
system information.
Workaround: Stop all running virtual machines, unpresent the repositories, and then delete the NFS
servers from Oracle VM Manager.
Bug 21466858
9.79 Oracle VM Server Upgrade Not Possible with NetApp Storage

plug-in
It is not possible to upgrade Oracle VM Server from Release 3.3.x to Release 3.4.1 if the NetApp Storage
plug-in, netapp-osc-linux, is installed.
Workaround: Remove the netapp-osc-linux plug-in before you upgrade Oracle VM Server to Release
3.4.1. When the upgrade successfully completes, reinstall the netapp-osc-linux plug-in.
Bug 21052337
9.80 Oracle VM Manager Web Interface Incorrectly Displays Oracle

VM Server Upgrade Required
The Update Required column incorrectly indicates that an update is required for Oracle VM Server when
you create a server update repository but do not enable that repository and then refresh the servers to
which that server update repository applies. If you subsequently attempt to upgrade Oracle VM Server, the
upgrade does not occur.
Note
The Update Required column is located in the Servers perspective in the

management pane on the Servers and VMs tab.
Bug 22374697
9.81 The Oracle VM Manager Silent Install Option Using A YAML

Configuration File Is Deprecated
The function to install Oracle VM Manager silently using a predefined YAML formatted configuration file is
intended only for internal use during testing at Oracle. The option to install using this facility is deprecated
for customer use and is undocumented in this release.
119
Aborting An Oracle VM Server Upgrade Initiated By The UpgradeServers.py
Script May Result In Inconsistent Reporting on Upgrade Status
Bug 22478672
9.82 Aborting An Oracle VM Server Upgrade Initiated By The

UpgradeServers.py Script May Result In Inconsistent Reporting on
Upgrade Status
In the unlikely case that an Oracle VM Server is in the process of being upgraded using the
UpgradeServers.py Script and the upgrade job is aborted from within Oracle VM Manager, the upgrade on
the Oracle VM Server may complete but the UpgradeServers.py script may also report that the upgrade
has failed. Equally, Oracle VM Manager may report an incorrect version or upgrade status for the Oracle
VM Server.
Workaround: Reboot the affected server and then disable maintenance mode on the server.
Bug 22488078
9.83 Kdump On Oracle VM Server Only Supports Dump Levels 0 and

1
The makedumpfile command, used to manually trigger a vmcore dump file is documented to support
dump levels from 0 to 31 using the -d switch. Notably, the manual page states that it is possible to specify
a value higher than 1 on an x86_64 machine running the Xen hypervisor. This is not the case for Oracle
VM Server. Only the values 0 and 1 can be specified for this parameter, or a vmcore file is not generated.
Workaround: There is no workaround. Only use dump levels of 0 or 1 if using the makedumpfile
command.
Bug 22329501
9.84 Network Receive Statistics For A Virtual Machine Are Invalid

And Set To -1
DRS/DPM algorithms that monitor network load on a virtual machine do comparisons between the most
recent network statistics and the previous network statistics to determine the deltas that can then be
evaluated in terms of user-defined thresholds.
The network statistics are captured as unsigned integers. This means that they have a range of [0,
4294967295]. If the number of bytes received is greater than 4 GB the value of the integer overflows and
begins from 0 again. In this situation, it is possible the start value for the statistic recorded by Oracle VM
Manager is greater than the end statistic. Once this has occurred, Oracle VM Manager sets this statistic to
-1 as it is no longer meaningful or valid.
If you have a DRS/DPM policy set to trigger on network load, the following error may appear in the log:
VM rx stats are not valid, the stats wrapped around.
In the event that an invalid network statistic is returned, the statistic is ignored by the DRS/DPM algorithm
for that cycle. Normal behavior resumes on the next cycle. This bug has a very limited effect and is only
noticeable on very loaded networks where the occasional log message may appear.
Workaround: There is no workaround required for this issue. It is expected behavior and the issue is
resolved automatically by the environment.
120
CPU Affinity After Live Migration of Virtual Machine on Non-Uniform Memory Access (NUMA) Systems
Bug 22550810
9.85 CPU Affinity After Live Migration of Virtual Machine on Non-

Uniform Memory Access (NUMA) Systems
After a live migration of a virtual machine between two servers with NUMA architecture, the CPU affinity
is set to "any CPU". As a result, the migrated virtual machine uses memory across multiple nodes, which
degrades performance of the virtual machine.
Workaround: Before performing the live migration of virtual machines, configure CPU pinning in the guest
vm.cfg file. For example, to pin a virtual machine with 4 VCPUs to physical CPUs 4, 5, 6, and 7, add the
following line to the vm.cfg:
cpu = "4-7"
Bug 22382809
9.86 Virtual Machines Based on Oracle Solaris 11 Do Not Boot

In some cases virtual machines based on Oracle Solaris 11 lower than 11.3 do not boot.
Workaround: Upgrade the guest operating system to Oracle Solaris 11.3 or higher.
Bug 22085158
9.87 Changing Domain Type from Xen HVM to Xen HVM PV Drivers
Causes Informational Messages in AdminServer.log
Changing the domain type of a virtual machine from Xen HVM to Xen HVM PV Drivers results in the
following informational messages of type vm.domain.mismatch and vm.os.mismatch being written to
AdminServer.log.
This issue occurs because Oracle VM Server does not distinguish between the Xen HVM and Xen HVM
PV Drivers domain types. When the domain type of the virtual machine changes to Xen HVM PV Drivers,
Oracle VM Server reports the domain type of the virtual machine as Xen HVM to Oracle VM Manager. As a
result, Oracle VM Manager falsely detects an error and logs the informational messages.
Workaround: You can ignore the informational messages and change the domain type of the virtual
machine to Xen HVM PV Drivers. The virtual machine successfully loads the PV drivers despite these
messages.
Bug 21163194
9.88 Single-Stream TCP Throughput is Degraded for Guest Virtual

Machines Running UEK Release 4
The single-stream TCP throughput in the TX subgroup is degraded for guest virtual machines running
Oracle Unbreakable Enterprise Kernel (UEK) Release 4.
Workaround: This issue occurs because UEK Release 4 includes support for the TCP Small Queues
(TSQ) mechanism. To resolve this issue, you can configure the guest virtual machine with the following
command:
121
Error Partitioning Caused by Disk Label or Format in UEFI Mode
echo 1048576 > /proc/sys/net/ipv4/tcp_limit_output_bytes
Bug 22546060
9.89 Error Partitioning Caused by Disk Label or Format in UEFI

Mode
If you attempt to install Oracle VM Server in UEFI mode on a virtual drive that is not GPT or only MBR, a
partitioning error occurs in the Anaconda installation program.
Workaround: Do the following to work around this issue:
1. Select OK to return to the previous installer screen.
2. Enter Alt+F2 to open a shell prompt.
3. Use the parted command to change the label of the disk. Alternatively, use the dd command to clean
up the disk.
4. Return to the installation program and then select Back to return to the previous installer screen.
5. Ensure that storage is discovered and then continue the installation.
Bug 22503847
9.90 Kernel Panic when Booting Guest Virtual Machine with Oracle
Solaris 11.2
When creating a virtual machine with a guest operating system of Oracle Solaris 11.2 on Oracle VM
Server, a kernel panic occurs when the virtual machine boots.
Workaround: Upgrade the guest operating system to Oracle Solaris 11.3.
Bug 22457279
9.91 Oracle VM Manager Web Interface Goes to Blank Screen with

Mozilla Firefox on a Linux System
When creating a new repository, the Oracle VM Manager Web Interface temporarily displays a blank
screen and the following message is written to AdminServer.log:
<Error>
<oracle.adfinternal.controller.application.AdfcExceptionHandler> <ADFC-50018>
<ADFc: No exception handler was found for an application exception.
javax.faces.FacesException: Broken pipe
This issue occurs when using a version of Mozilla Firefox that is lower than Version 44.0 on a Linux
system to access the Oracle VM Manager Web Interface. This issue does not affect the jobs in Oracle VM
Manager to create a new repository.
Workaround: Upgrade to Mozilla Firefox Version 44.0.
Bug 22553553
122
HugePages Deprecated for PVM Guests as of Oracle VM Release 3.4.1
9.92 HugePages Deprecated for PVM Guests as of Oracle VM

Release 3.4.1
The HugePages feature is deprecated in Oracle VM Release 3.4.1. You should not enable HugePages
when creating or editing virtual machines with a domain type of PVM in the Oracle VM Manager Web
Interface or Oracle VM Manager Command Line Interface. This feature will be removed in a future release
of Oracle VM.
If you have HugePages enabled for any PVM guests, Oracle recommends that you change the domain
type for virtual machines from Paravirtualized (PVM) to Hardware virtualized, with paravirtualized drivers
(PVHVM). If you cannot change the domain type for a virtual machine, you should disable the HugePages
setting and then restart the virtual machine.
Bug 22540900
9.93 HugePages Does Not Display as Selected in Oracle VM

Manager Web Interface
The Enable Huge Pages option in the Edit Virtual Machine dialog box does not display as selected when
virtual machines with a PVM domain type are running.
Workaround: There is no workaround for this issue. However, Oracle recommends that you do not enable
HugePages for any PVM guests. See Section 9.92, “HugePages Deprecated for PVM Guests as of Oracle
VM Release 3.4.1”.
Bug 22746016
9.94 Kdump Service Hangs at Discovery of FCoE Device with

Broadcom CNA on HP Servers
If you install Oracle VM Server in Fiber Channel over Ethernet (FCoE) LUNs over Broadcom Converged
Network Adapters (CNA) on HP servers, the kdump service hangs when discovering FCoE LUNs.
Bug 22508971
9.95 Do Not Discover Oracle VM Servers Earlier than Release 3.2.10

If you attempt to discover an instance of Oracle VM Server that is earlier than Release 3.2.10 with Oracle
VM Manager Release 3.4, the following occurs:
• The discovery job fails with the following error message:

OVMAPI_4010E Attempt to send command: update_core_api_bindings to server:
server_fqdn failed. OVMAPI_4004E Sync command failed on
server: server_ip. Command: update_core_api_bindings, Server error:
org.apache.xmlrpc.XmlRpcException: urlgrabber.grabber.URLGrabError:[Errno 14]
problem making ssl connection
• Conflicts occur between the databases that Oracle VM Manager requires for maintaining synchronization
between internal components. As a result, the Oracle VM Manager Web Interface can display inaccurate
information about the Oracle VM environment.
123
(SPARC Only) Cannot Export Virtual Appliance with Physical Disk Access
• The instances of Oracle VM Server, earlier than Release 3.2.10, that you discover cannot be removed
with either the Oracle VM Manager Web Interface or the Oracle VM Manager Command Line Interface.
Workaround: Do not use Oracle VM Manager Release 3.4 to discover or interact with any instances of
Oracle VM Server earlier than Release 3.2.10.
Bug 22735203
9.96 (SPARC Only) Cannot Export Virtual Appliance with Physical

Disk Access
If you create a virtual machine on an Oracle VM Server for SPARC with a physical disk access, it is not
possible to export that virtual machine as a virtual appliance.
In this case, when you attempt to export the virtual machine as a virtual appliance with the Oracle VM
Manager Command Line Interface, the following error message is displayed:
Server error: vbox-img didn't return expected value (0,)
CMDERR:
vbox-img: error: VD: error VERR_FILE_NOT_FOUND opening image file '/dev/mapper/<disk_Id>'
vbox-img: error: Error while opening source image: File not found.
(VERR_FILE_NOT_FOUND)
Bug 22745868
9.97 (SPARC Only) MTU Resets to the Default of 1500 After Server
Power Off
If you configure the MTU parameter of a network interface for an ethernet bridge and then power off the
Oracle VM Server for SPARC, the MTU used by the bridge after the boot can be reset to the default value
of 1500 instead of the configured value.
Workaround: When the interface used for the bridge is persistently plumbed in the primary domain, the
bridge is created with the appropriate MTU parameter after the server power off and reboot. Use the
ipadm(1M) command to persistently plumb a network interface, as in the following example:
# ipadm create-ip net0
Bug 22705349
9.98 Oracle VM Server Installer Fails When Modifying Swap

Partitions
An exception occurs and the Oracle VM Server installer stops abruptly if you select File System Options
while editing a swap partition from the Partitioning Type screen.
Workaround: Do one of the following from the Review Partition Layout screen:
• Select Yes to review and modify the partitioning layout. On the Partitioning screen, delete the swap and
then create a new one.
124
Kernel Startup is Slow after Upgrading to UEK4 on PVHVM Guests
• Select No to skip the partitioning layout check and proceed with the installation.
Bug 22807435
9.99 Kernel Startup is Slow after Upgrading to UEK4 on PVHVM

Guests
If you upgrade the kernel on a PVHVM virtual machine to UEK4, the kernel init process takes several
minutes to complete.
Workaround: Upgrade GRUB to the most recent version.
Bug 22761370
9.100 Cannot Enable High Availability (HA) for Virtual Machines with
HugePages
If you attempt to enable HA for a running virtual machine that has HugePages enabled, the job to enable
HA fails with the following error message:
OVMRU_005002E Operation not allowed- Virtual Machine: vm_name, is not STOPPED. It is RUNNING.
This error occurs if you attempt to enable HA in either the Oracle VM Manager Web Interface or the Oracle
VM Manager Command Line Interface.
The preceding error message does not accurately describe the issue. The fact that the virtual machine is in
the running state does not affect the ability to enable HA. The error results from the fact that HugePages is
enabled for the virtual machine.
Workaround: Disable the HugePages setting and then restart the virtual machine. After the virtual
machine starts, enable HA.
Bug 22753803
9.101 Kdump is Not Supported on FCoE SANs

Kdump is not supported if you install Oracle VM Server on an Fiber Channel over Ethernet (FCoE) SAN .
Bug 22816860
9.102 Cannot Edit Running Virtual Machines with HugePages and

HA Enabled
It is not possible to edit a running virtual machine through the Oracle VM Manager Web Interface if that
virtual machine has both HugePages and high availability (HA) enabled. The job to edit the virtual machine
fails with the OVMRU_005002E Operation not allowed error message.
Bug 22814818
125
Import URL Cannot Exceed Maximum Character Length
9.103 Import URL Cannot Exceed Maximum Character Length

The maximum character length of the URL to import objects into Oracle VM Manager, such as virtual
appliances, virtual disks, or ISO files, is 3,988. The maximum character length of the URL to import
templates is 3,985.
If you attempt to import an object from a URL that exceeds the maximum character length, an error occurs
and the import fails, as in the following example:
OVMAPI_D000E Cannot set description on object: my_virtual_appliance.ova.
Its length: 4,012, exceeds the maximum size: 4,000.
Even though the error message indicates the maximum character length is 4,000, a prefix is automatically
added to the URL during the import job. As a result, the effective character limit for the URL is 3,988 or
3,985.
Workaround: There is no workaround for this issue. Ensure that the origin URL for any object that you
plan to import into Oracle VM Manager is not greater than the maximum character limit.
Bug 23073177
9.104 Performance Impact for Fewer than 8 CPUs Configured for

dom0
For best performance, if dom0 is configured with fewer than 8 CPUs, the xen_netback max_queues
option in the ovs.conf file should be set to the number of CPUs configured for dom0. For example, if you
configure dom0 with 6 CPUs, then you should set the value of the xen_netback max_queues option to
6.
Workaround:
1. Start an ssh session to Oracle VM Server.
2. Open /etc/modprobe.d/ovs.conf for editing.
3. Set the value of the xen_netback max_queues option equal to the number of CPUs configured for
dom0.
4. Reboot Oracle VM Server for the setting to take effect.
Bug 22817196
9.105 Migration of PVHVM Guest Virtual Machines may be Affected

by Linux Kernel Version
When migrating a PVHVM guest virtual machine with Linux kernel version 3.8.13-68.el6uek.x86_6,
soft lockup issues may occur.
Workaround: Before migrating a PVHVM guest virtual machine from one instance of Oracle VM Server
to another, update the Linux kernel version to 3.8.13-104.el6uek.x86_6 or higher to avoid soft
lockup issues. For more information, see PVHVM Guest Was Not Reachable After Being Live Migrated
Document ID 2204849.1, on My Oracle Support at: https://support.oracle.com/oip/faces/secure/km/
DocumentDisplay.jspx?id=2204849.1.
Bug 20878962
126
SR-IOV Is Not a Supported Feature
9.106 SR-IOV Is Not a Supported Feature

Oracle VM does not support Single Root I/O Virtualization (SR-IOV) except for where SR-IOV is used by
Oracle Exalogic systems.
Bug 21957308
9.107 Oracle VM Manager Upgrade Does Not Restore External

Authentication Provider
The Oracle VM Manager upgrade process does not save and restore any configurations you create for
external authentication providers. For example, if you configure Oracle VM Manager to authenticate users
against an LDAP or Active Directory and then perform an upgrade, that configuration is not restored after
the upgrade is complete.
Workaround: Complete the steps to enable LDAP or Active Directory authentication after you successfully
upgrade Oracle VM Manager.
Bug 21314388
9.108 Limit of 3 Virtual Machine Console Windows with Microsoft

Internet Explorer
Microsoft Internet Explorer allows a default maximum of six concurrent WebSocket connections to a single
server domain. Each virtual machine console window, or serial console, uses two WebSocket connections.
As a result, the maximum number of virtual machine console windows that you can open in Internet
Explorer is three.
• Refer to the appropriate Microsoft documentation for information on changing the maximum number of
concurrent WebSocket connections.
• Use a different browser, such as Mozilla Firefox.
Bug 21617374
9.109 Virtual Machine Migration Job Loop During Oracle VM

Upgrade
During the upgrade process, if virtual machines are running on Oracle VM Server, a job to migrate those
virtual machines can fail and then be repeatedly triggered without the ability to stop or abort the job. As a
result, it is not possible to upgrade that instance of Oracle VM Server using the Yum repositories that you
configure in Oracle VM Manager.
You must reboot the Oracle VM Server and then complete the upgrade process by manually upgrading
Oracle VM Server with the installation media. When you successfully complete the upgrade, the instance
of Oracle VM Server that you manually upgraded is in maintenance mode. Taking the server out of
maintenance mode then causes the following error:
VMAPI_2005E "ID" contains a component "ID" in error.
Error event: server.upgrade.in.progress., Summary: Server Upgrade in Progress,
127
Virtual Machine Migration Job Loop During Oracle VM Upgrade
Description: Upgrade continuing after an interruption.
This issue occurs if you upgrade to Oracle VM Release 3.3.4 through multiple previous releases. For
example, if you upgrade from Release 3.1.1 to Release 3.2.9 and then upgrade to Release 3.3.2.
Workaround: Clear the server.upgrade.in.progress. event from the Oracle VM Manager database
as follows:
1. Open an SSH connection to Oracle VM Manager.
2. Run the following command to connect to the MySQL database:

# mysql --user='username' -p -S /u01/app/oracle/mysql/data/mysqld.sock
3. Specify the password for the user at the prompt.
4. Run the following command to change to the ovs database:

mysql> use ovs
5. Run the following statement:

mysql> select associatedObjectID, description from OVM_EVENT where type=
'server.upgrade.in.progress.' -> ;
The statement returns an object ID for the instance of Oracle VM Server to which the event applies, as
in the following example:
+--------------------+------------------------------------+
| associatedObjectId | description |
+--------------------+------------------------------------+
| 303 | Server: server_name, is being upgraded. |
+--------------------+------------------------------------+
1 rows in set (0.00 sec)
6. Run the following statement, substituting object_ID with the object ID that was returned with the
preceding statement:
mysql> update OVM_EVENT set acknowledged=1 where associatedObjectId=object_ID and type=
'server.upgrade.in.progress.';
The statement acknowledges the event and displays a message such as the following:
Query OK, 1 row affected (0.01 sec)
Rows matched: 1 Changed: 1 Warnings: 0
7. Run the following statement to confirm the server.upgrade.in.progress. event is

acknowledged:
mysql> select acknowledged from OVM_EVENT where type='server.upgrade.in.progress.';
A message such as the following displays:

+--------------+
| acknowledged |
+--------------+
| 1 |
+--------------+
8. Exit the database.

mysql> exit
128
The kdump Service Cannot Mount the Root Partition if Zone Connection to EMC Storage Array
For information about manually upgrading Oracle VM Server with the installation media, see Upgrading
Oracle VM Server Using the ISO File in the Oracle VM Installation and Upgrade Guide.
Bug 22746573 and 22752343
9.110 The kdump Service Cannot Mount the Root Partition if Zone
Connection to EMC Storage Array
The kdump service on Oracle VM Server cannot mount the root partition if the host has a zone connection
to an EMC storage array.
Workaround: Specify the UUID as the device name in /etc/kdump.conf.
Bug 22605466
9.111 Oracle VM Server Hangs During Upgrade if Boot Partition Not

Large Enough
During the upgrade of Oracle VM Server, using the UpgradeServer.py script, the server can hang when
it reboots if there is not enough space allocated to the boot partition.
Workaround: Allocate as much space as possible to the boot partition before you attempt to upgrade
Oracle VM Server. At a minimum, you should allocate 500MB for the boot partition.
Bug 22600941
9.112 GRO Must Be Disabled After an Upgrade When Routing/

Bridging with IXGBE Driver
A kernel issue requires that Generic Receive Offload (GRO) be disabled when routing or bridging wiht the
IXGBE driver. This issue has been fixed for fresh installs, but if you are upgrading to the current release
from a release prior to Oracle VM Server 3.3.3, you must disable GRO manually yourself.
Workaround: Disable GRO manually on each affected Oracle VM Server, using ethtool:
# ethtool -K ethX gro off
Bug 21353855
9.113 Change in Variable Name for the eventGetTypes SOAP Call

using Oracle VM Web Services API
The member variable in the response class for the eventGetTypes call in the SOAP API was changed from
return to eventTypes in Oracle VM 3.3.3. Therefore, if you have client code written for the SOAP API
using the original WSDL or client library code provided with an earlier release, the parser for this call may
fail.
The REST API is unaffected by this change.
Workaround: If you used the client library OvmWsClient.jar provided in the SDK within your client code,
this problem is easily remedied by simply updating the OvmWsClient.jar file with a version from the current
129
Restart Virtual Machines After Upgrade
release. Alternately, if you did not use the supplied client library and relied on the WSDL to build your own
library instead, you may need to rebuild your own library.
Important
The SOAP API is deprecated and support will be discontinued in future releases.
If you are affected by this bug, consider changing your code to use the REST API
instead. This is the preferred approach to resolving this issue.
Bug 22005704
9.114 Restart Virtual Machines After Upgrade

If you upgrade from Oracle VM Server Release 3.3.1 using PVHVM and live migration, you must restart
your virtual machines after the upgrade is complete.
Bug 20826023
9.115 LRO Setting Bridge Interface

The LRO setting should be disabled when the interface is part of a bridge.
Bug 20390704
9.116 Disable Transitional Update Repository

Known issue where the Transition Update Repository needs to be disabled via Oracle VM Manager UI
when upgrading Oracle VM Server to a newer 3.3 maintenance release
Workaround: Disable the transitional update repository before upgrading Oracle VM Server Release 3.3.
Bug 20288874
9.117 (X86 Only) SWIOTLB Buffer Errors When Using Jumbo Frames
on Oracle VM Server
When a network port has been configured for jumbo frames on an Oracle VM Server, errors may appear
in the logs of the Oracle VM Server indicating that the SWIOTLB buffer is full. The SWIOTLB is a software
component used by the Xen hypervisor. By default, 128 chunks of 512 KB of memory are allocated to
SWIOTLB. On an active Oracle VM Server with jumbo frames enabled, these chunks of memory can be
used up quickly, degrading network performance and resulting in errors in the system log.
Workaround: Change the Oracle VM Server grub configuration to append the swiotlb=131072 option to
the kernel line.
Bug 20693762
9.118 Operation Transactions

A major change to the way in which the CLI and Oracle VM Manager Web Interfaceinteracts with Oracle
VM Manager means that transactions have changed in Release 3.3.1. From Release 3.3.1 onwards, if an
130
One Instance of Oracle VM Manager Web Interface Per Browser Session
operation that contains child operations fails, it is important to check the state of all objects affected by the
parent and child operations. For example, during the creation of a server pool, the parent command calls
a number of child operations. If any of these child operations fail, the command returns an error, but the
server pool object may still be created by the parent operation. In this case, the server pool object must be
removed manually before attempting to create the server pool again.
Workaround: If an operation fails, check to ensure that the object you were attempting to create is not
listed within Oracle VM Manager. If the object is listed, you must remove it before attempting to create it
again.
Bugs 17377700, 17436889
9.119 One Instance of Oracle VM Manager Web Interface Per

Browser Session
Connecting to multiple instances of the Oracle VM Manager Web Interface per web browser session can
result in unexpected issues.
Workaround: Connect to one instance of the Oracle VM Manager Web Interface per web browser
session.
Bug 13034728 and 21695861
9.120 IPv6 Updates On Some Microsoft Windows Guests Do Not

Reflect in Oracle VM Manager
On Microsoft Windows guests prior to Microsoft Windows Vista, if the IPv6 address is changed and the
IPv4 address remains constant, Oracle VM Manager does not reflect the IP address change until the IPv4
address is changed as well.
Bug 14005821
9.121 Incorrect Text Color After Acknowledging VM Errors

After acknowledging an error event on a virtual machine, the text in the Event Severity column of the
Virtual Machines perspective in the Servers and VMs tab is displayed in red, instead of black. The error
event has been acknowledged, and the incorrect text color can be ignored.
Workaround: Navigate to another page in the UI, then return to the Virtual Machines perspective in the
Servers and VMs tab. The text is the correct color, black.
Bug 14027051
9.122 Unable to Copy Text or Take Screen Shots of Error Dialogs

Some web browser versions have been shown to have trouble allowing users to copy the text in pop-up
error dialogs, or to take screen shots of these. This problem is limited to ADF induced pop-up dialogs.
Workaround: Update your web browser to a more recent version, or try using an alternative web browser.
Bug 17832280
131
Safari Web Browser on Windows is not Supported
9.123 Safari Web Browser on Windows is not Supported

On Windows using Safari to access Oracle VM Manager results in a blank page. This is due to a failure
that occurs during the SSL handshake when the server has enabled two-way SSL. Since Oracle VM
Manager uses two-way SSL for client certificate authentication, the Safari browser is not supported on
Windows.
Bug 18025985
9.124 Object Lock Prevents Some Operations

Some operations, such as server discovery, lock particular objects in the data model until they have
finished executing. This is to protect these objects from modification by an external process that may
interrupt the currently running operation or result in inconsistencies within the data model. If an object is
locked when either the Oracle VM Manager Web Interface or Oracle VM Manager Command Line Interface
attempts to edit it, an error is returned to notify you of the lock. This error may look similar to the following:
GEN_000029:Object server1.example.com:ff:20:00:08:ff:ff:ff:ff:ff:ff:00:21:28:af:a4:92
of type Server could not be modified as it was locked when it was fetched.
Workaround: If you are using the Oracle VM Manager Web Interface to perform the edit, close the edit
dialog and then reopen it to refresh the data that is contained within it before attempting to retry the edit
operation.
If you are using the Oracle VM Manager Command Line Interface perform a show operation against the
object to see the current values and to ensure that the object is not locked. Objects that can be locked
include a 'locked' attribute that is displayed when you perform a show operation. If the object is no longer
locked, you can retry your edit.
Bug 18385924
9.125 Unable to Configure NTP For All Servers

Previous releases of the Oracle VM Manager Web Interface provided an option to configure NTP for all
of the Oracle VM Servers that were under the ownership of the Oracle VM Manager instance. The option
to perform batch configuration of NTP is no longer available in the Oracle VM Manager Web Interface,
however it is possible to edit the NTP servers for each individual Oracle VM Server in Oracle VM Manager
in the Edit Server dialog.
If you need to batch edit the NTP servers for a large number of Oracle VM Servers in your environment,
you should use the Oracle VM Manager Command Line Interface or the Oracle VM Web Services API to
do this programmatically.
Bug 18435973
9.126 (x86 Only) Oracle VM Server Installer Goes To Black Screen

After Running /sbin/loader
While the Oracle VM Server Installer is booting, the installer runs /sbin/loader and then the screen
goes black on some systems, such as the Dell Optiplex 755. This is a hardware issue related to the Intel
82Q35 Graphics Controller used on these systems.
The fix is to disable Intel VT-d (Intel Virtualization Technology for Directed I/O) functionality within the
BIOS.
132
(x86 Only) Oracle VM Server Installer Hangs Waiting for Hardware to Initialize
Bug 17817142
9.127 (x86 Only) Oracle VM Server Installer Hangs Waiting for

Hardware to Initialize
While the Oracle VM Server Installer is booting, it can hang for between 9 and 30 minutes with the
message: "Waiting for hardware to initialize...". This occurs when the system BIOS is misconfigured to
search for a floppy drive and the system has no floppy drive installed.
This behavior only occurs in the installer, and is not present once Oracle VM Server has completed
installation.
The fix is to correct the BIOS setting and disable the floppy drive.
Bug 18036268
9.128 (x86 Only) Oracle VM Server Installer Hangs Examining

Storage Devices For Large Number of LUNS
When performing a kickstart installation of Oracle VM Server, the Installer can hang for long periods with
the message: "Examining storage devices...". This occurs when a very large number of Fibre Channel
LUNs is attached to the server and the kickstart configuration file has not been configured to ignore all
disks other than the target installation disk.
To resolve this issue add a line to your kickstart configuration similar to the following:
ignoredisk --only-use=/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0
Change the path of the --only-use parameter to match the target disk that you intend to install to.
See the Oracle VM Installation and Upgrade Guide for more information on this and on kickstart
installations.
Bug 17586422
9.129 (x86 Only) Benign Error Message During Install:

HDIO_GET_IDENTITY failed
A benign error message may appear on the Oracle VM Server console during or at the end of an
installation. The error usually looks similar to the following:
ata_id[23584]: HDIO_GET_IDENTITY failed for '/dev/sdh'
This error does not affect installation in any way.
Bug 17457813
9.130 (x86 Only) Cannot Use Installation Media to Upgrade Oracle

VM Server if Earlier than Release 3.3.x
Upgrading an instance Oracle VM Server earlier than Release 3.3.x from the installation media is not
supported. Upgrades from releases earlier than Release 3.3.x involve transitional steps that require you to
configure and set up Yum repositories. For more information, see the Oracle VM Installation and Upgrade
Guide.
133
(x86 Only) Oracle VM Server Upgrade From ULN or Oracle Public Yum
Repositories is Restricted to Servers That Do Not Use Non-Native Packages
Bug 17946919
9.131 (x86 Only) Oracle VM Server Upgrade From ULN or Oracle

Public Yum Repositories is Restricted to Servers That Do Not Use
Non-Native Packages
Upgrading an x86 Oracle VM Server directly using ULN or Oracle Public Yum Repositories is supported on
condition that your Oracle VM Server does not use any third party storage plugins or have any non-native
packages installed.
9.132 (x86 Only) Many ISCSI or Fibre Channel LUNs Require More
Server Memory
As the number of iSCSI or Fibre Channel LUNs or targets used by an Oracle VM Server is increased, the
memory consumption increases on the server. This is normal, as more memory is required by dom0 to
connect to each LUN or target. Therefore, if you intend to add a large number of LUNs to a server, you
must allocate an appropriate amount of physical memory to the server to handle this, and the additional
memory must be assigned to dom0 for use. Typically this should be around 1 MB per LUN on top of
the memory allocated to run dom0. See Changing the Memory Size of the Management Domain for
information on how to change the dom0 memory allocation.
Memory is assigned to dom0 within the grub configuration on the server. If you are using UEFI boot,
the grub configuration file is located at /boot/efi/EFI/redhat/grub.cfg, otherwise the grub
configuration file is located at /boot/grub2/grub.cfg. Edit the line starting with 'multiboot2 /xen.gz' and
append the required boot parameters. For example, you may adjust the value for the dom0_mem parameter
as shown in the following line of the configuration:
multiboot2 /xen.gz dom0_mem=max:6144M allowsuperpage dom0_vcpus_pin dom0_max_vcpus=20
placeholder ${xen_rm_opts}
On servers running an earlier release of the current Oracle VM Server software,an earlier version of grub
may still be in use. In this case the same result can be achieved by editing the /boot/grub/grub.conf
file on the server and ammending the dom0_mem parameter in the line starting with 'kernel /xen.gz', as
shown in the following line of the configuration:
kernel /xen.gz console=com1,vga com1=38400,8n1 dom0_mem=6144M allowsuperpage
Ideally this should be allocated at installation so that the dom0 grub configuration is updated automatically.
Otherwise, you may need to adjust the grub configuration yourself.
Insufficient memory to support the number of LUNs on an Oracle VM Server results in out-of-memory
(oom) kills and server instability.
Bug 17614799
9.133 Clustered Server Pools in Mixed Platform Environments

Require NFS Access Groups To Be Configured
When creating a clustered server pool with NFS as the storage for the server pool file system, Oracle VM
Manager randomly selects a server to initialize the NFS file system to be used by the clustered server pool.
This can cause problems in environments where Oracle VM Manager has been configured for both x86
and SPARC servers, since the pool file system is different for each of these platforms and can only be
used by servers of the same type.
134
(SPARC Only) Cluster Recovery May Fail When Using NFSv3 For Server Pool File System
If an NFS pool file system is initialized by an x86 server then that file system can only be used for a cluster
server pool with x86 servers. Similarly, if an NFS pool file system is initialized by a SPARC server then that
file system can only be used for a cluster server pool with SPARC servers.
To prevent this issue, before creating a clustered server pool with an NFS file system, create a file system
access group for that file system with only the servers that will be in the server pool.
Bug 17490488
9.134 (SPARC Only) Cluster Recovery May Fail When Using NFSv3
For Server Pool File System
If an Oracle VM Server in a clustered server pool fails, any file locks created by the NFS server while the
Oracle VM Server was online are enforced until the Oracle VM Server recovers and notifies the NFS server
to release those locks. This can block other Oracle VM Servers in the cluster indefinitely. This behavior
is the result of the stateless nature of NFSv3 and its file locking mechanism. The locks can be cleared in
Solaris, using the clear_locks command. However, this problem is recurrent as long as you continue to
use NFSv3 to host a cluster file system.
Since NFSv4 is a stateful protocol and its locking mechanism is built into the protocol, this problem does
not occur if you use NFSv4 to host a cluster file system. Under NFSv4, the state associated with file locks
is maintained at the server under a lease-based model, where locks are leased to a client and the client
needs to renew the lease. If the client fails to renew the lease then the NFS server is free to give the lock to
another client. Therefore, SPARC-based server pools that are configured to use clustering, should use an
NFSv4 export to host the cluster file system.
Note that since x86 server pools use an OCFS2 file system, even if they are hosted on an NFS share, they
are unaffected by this problem.
Bug 18997487
9.135 (x86 Only) Server BIOS Settings

The following server BIOS settings may be required to use Oracle VM Server:
• AHCI mode may be necessary to recognize the CDROM device to perform an installation from CDROM.
• Disable I/O MMU Virtualization Settings; for Intel-based servers this is VT-d; for AMD based servers this
is AMD-Vi or IOMMU. I/O MMU is not supported in this release.
9.136 (x86 Only) Oracle VM Server Does Not Support

crashkernel=auto Boot Parameter
Although Oracle Unbreakable Enterprise Kernel 3 (UEK3) supports the crashkernel=auto boot
parameter, this option is not supported by the Xen hypervisor that is used for Oracle VM Server.
Attempting to set this parameter results in the following boot errors:
(XEN) crashkernel: memory value expected
(XEN) Command line: console=com2,vga com2=57600,8n1 dom0_mem=840M allowsuperpage
crashkernel=auto
Dom0 fails to load the kdump service at start-up with the following message:
kdump: No crashkernel parameter specified for running kernel
Workaround: Specify a valid fixed memory range suitable for the server hardware if you choose to use
this parameter. For example, crashkernel=256M@64M.
135
Kdump Core Collector Using Sparse Copy Fails
Bug 18174580
9.137 Kdump Core Collector Using Sparse Copy Fails

When kdump on an Oracle VM Server is configured to use sparse files for vmcore dump files to reduce the
dump file size, kdump fails with an error similar to:
Scanning and configuring dmraid supported devices
...
cp: unrecognized option `--sparse=always'
...
Workaround: Add the following to the kdump.conf on the Oracle VM Server:

extra_bins /bin/cp
core_collector /bin/cp --sparse=always
Bug 15959684, 17943175
9.138 (x86 Only) Oracle VM Server Installation on Sun Fire X4800

If you are installing Oracle VM Server on a Sun Fire X4800, you must provide extra parameters when
booting from the installation media (CDROM or ISO file), or when using a kickstart installation. These
parameters allow the megaraid_sas driver to load correctly.
If booting from the installation media, press F2 when the initial boot screen is displayed and provide the
following additional parameters as part of the boot command:
mboot.c32 xen.gz extra_guest_irqs=64,2048 nr_irqs=2048 --- vmlinuz --- initrd.img
If using a kickstart installation, add the additional kernel parameters to the PXE configuration file.
If you want to make these changes permanent, edit the /boot/grub/grub.conf file in your Oracle VM Server
after the installation has completed.
Bug 12657272
9.139 (x86 Only) Installation of Oracle VM Server on some HP Server

Hardware May Fail if Tape Drive is Attached
Installation of Oracle VM Server may fail on some HP server hardware when the tape drive is attached,
rendering error messages describing a problem with a call to "makeDriveDeviceNodes". To avoid this
issue, disconnect the tape drive and begin the installation again.
Bug 14667345
9.140 (x86 Only) Wake On Lan (WOL) Fails if Oracle VM Servers on

Different Subnets
Starting or restarting Oracle VM Servers fails if the Oracle VM Servers in a server pool are on different
subnets.
Workaround: Use IPMI (Intelligent Platform Management Interface) to start or restart Oracle VM Servers
in a server pool that are on different subnets.
Bug 12410458
136
(x86 Only) Sun Fire X4170 Server Not Fenced During Cluster Failure
9.141 (x86 Only) Sun Fire X4170 Server Not Fenced During Cluster
Failure
In some situations where a Sun Fire X4170 server has a hardware failure or fault/error, the Oracle VM
Server may not be fenced and removed from the cluster, even though it is not available to participate in the
cluster.
Workaround: Fix the hardware fault, and/or clear the error messages/faults using the ILOM CLI.
Bug 14463948
9.142 (x86 Only) Netconsole Unknown Error 524 During Oracle VM

Server Start-up
To use netconsole you must specify a non-bridged ethx device, in the /etc/sysconfig/netconsole file on an
Oracle VM Server, for example:
# The ethernet device to send console messages out of (only set this if it
# can't be automatically determined)
# DEV=
DEV=eth2
Bug 12861134
9.143 (x86 Only) ACPI Buffer Error After Installing Oracle VM Server
On some Intel-based systems, the following error may occur after installing Oracle VM Server when the
computer is started:
[ 0.674742] ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits)
(20090903/dsopcode-596)
[ 0.675167] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_._OSC] (Node ffff88002e4fba50), AE_AML_BUFFER_LIMIT
This has been observed on systems with the following BIOS information, but may also occur in other BIOS
versions:
Vendor: Intel Corp. Version: S5500.86B.01.00.0036-191.061320091126 Release Date: 06/13/2009 BIOS

Revision: 17.18 Firmware Revision: 0.0
HP ProLiant BL685c G6 HP BIOS A17 12/09/2009 Backup Version 12/01/2008 Bootblock 10/02/2008
This error can safely be ignored.
Bugs 12865298 and 12990146
9.144 Failed Server Evacuation Defined in DPM Policy Generates

User Acknowledgeable Event
Certain conflicting and concurrent events can cause server evacuation, the process whereby running
virtual machines are migrated to an alternate Oracle VM Server before shutdown due to a DPM policy, to
fail. For instance, attempting to manually migrate a virtual machine on an Oracle VM Server at the same
time that the DPM policy is attempting to shutdown the Oracle VM Server can cause the DPM policy to fail
with a server evacuation error message. This leaves the Oracle VM Server in a warning state, which must
be cleared before the server can return to normal operation.
137
(SPARC Only) Serial Console Hangs During Installation of Oracle Solaris 11 on Virtual Machine
Workaround: If a server is in warning state after a failed DPM operation, acknowledge the related event.
The server assumes its normal operational role again and the warning is cleared.
Bug 18962618
9.145 (SPARC Only) Serial Console Hangs During Installation of

Oracle Solaris 11 on Virtual Machine
The serial console in the Oracle VM Manager Web Interface hangs during the installation of Oracle Solaris
11 on a virtual machine.
Workaround: Manually access the console from the Oracle VM Server hosting the virtual machine,
by identifying UUID and the port where the virtual machine is running, and then telnetting to that
port from the Oracle VM Server. For example, to access the console for a virtual machine with UUID
0004fb00000600000a395ecc901e7822:
# ldm list
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 16 16G 9.3% 44d 20h 41m
0004fb00000600000a395ecc901e7822 active -n---- 5000 8 4G 0.2% 2d 14m
0004fb000006000014fcd950934fbb3f active -n---- 5001 8 4G 0.6% 4d 22h 51m
0004fb00000600006e6e2b1504cf6f64 active -n---- 5003 8 4G 0.2% 2d 9m
0004fb0000060000fc8632393068ee2b active -n---- 5002 8 4G 0.2% 3d 19h 4m
# telnet localhost 5000

Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Connecting to console "0004fb00000600000a395ecc901e7822" in group

"0004fb00000600000a395ecc901e7822
Press ~? for control options ..
Bug 18082287
9.146 Editing Virtual Machine Configuration File Results in

Unexpected Behavior
Any changes to the virtual machine configuration file should be performed using Oracle VM Manager.
The only exception to this is if advised to manually edit the vm.cfg file by Oracle Support Services, or as
explicitly specified in these Release Notes.
Manual changes made to the virtual machine configuration file (vm.cfg) are not reflected in Oracle VM
Manager. Any manual changes to the vm.cfg file may result in unexpected and undesirable behaviour. For
example, if you edit the HA setting in the vm.cfg to disable HA, and the virtual machine is stopped by any
method other than using Oracle VM Manager, the virtual machine is restarted. Oracle VM Manager is not
aware of the HA change in the virtual machine's configuration file.
Bugs 12654125 and 13391811
9.147 Concurrent Template Operations May Fail Due to Lock Issue

When importing and deleting several templates concurrently, or when an Oracle VM Server is removed
during the import of a template, a lock exception error may appear. However, the template upload often
138
(SPARC Only) Wrong Error Message Returned When Importing A Template From An Incorrect URL
completes successfully despite the error message, but it does not appear in the list of available templates
in the storage repository.
To resolve this problem, refresh the storage repository. The uploaded template file should then appear in
the list. In some cases the imported template turns out to be incomplete. In that case, you should delete
the template and import the template again.
9.148 (SPARC Only) Wrong Error Message Returned When

Importing A Template From An Incorrect URL
If you attempt to import a template for a virtual machine from an incorrect URL located on an HTTPS
server that has an SSL certificate that cannot be verified, an incorrect error message is returned indicating
that the certificate could not be verified instead of the fact that the file could not be found.
If you receive an error indicating that the certificate could not be verified, check that the file that you are
attempting to import is accessible at the URL that you provided.
Bug 18003814
9.149 (x86 Only) Virtual Machine Fails to Restart On Another Server

in the Cluster if ACPI is Enabled
A virtual machine may fail to restart on another server within the cluster when the original server becomes
unavailable and ACPI power management is enabled within the BIOS for either of the Oracle VM Servers
within the cluster.
Workaround: Disable ACPI within the BIOS for each of the Oracle VM Servers within the cluster.
Bug 14747722
9.150 (x86 Only) Oracle Solaris 10 Virtual Machine May Hang During
Shutdown
When performing a graceful shutdown from within a virtual machine running Oracle Solaris 10, or when
attempting to stop the virtual machine from within Oracle VM Manager, or when performing a migration of
the virtual machine, the virtual machine may hang during the shutdown process. This may be caused by
an operating system error, or some other unknown error. You can use the virtual machine console in the
Oracle VM Manager Web Interface to check for operating system errors.
This bug does not affect virtual machines running Oracle Solaris 11.
Workaround: Kill the virtual machine affected using the Kill VM option within Oracle VM Manager.
Bug 15863719
9.151 (x86 Only) Virtual Machine Created with Network (PXE)

Installation Does Proceed Beyond Pre Boot
Creating a virtual machine using the Network method (PXE) does not proceed beyond pre boot, so the
virtual machine is not created. This occurs for Oracle Linux 5.x virtual machines.
Bug 12905120
139
(x86 Only) Maximum Memory to Start a PVM Guest is 470 GB
9.152 (x86 Only) Maximum Memory to Start a PVM Guest is 470 GB

Although PVM guests are technically capable of running with up to 500,000 MB of virtual memory
allocated, as described in Chapter 7, Configuration Limits for Release 3.4, attempting to start a PVM Guest
with more than 470 GB of memory can cause the virtual machine to crash on boot. This problem does not
occur if the PVM Guest is started with 470 GB of memory. You are able to hot-add up to 500 GB virtual
memory to the PVM Guest once it is running.
Bug 18538335 and 24527381
9.153 (x86 Only) Creating a PVM Guest Slow Using Local Storage
Creating a PVM guest using local storage may take a very long time. This may be caused by write caching
being turned off for the local disk.
Workaround: Enable write caching for the disk using the hdparam utility.
Bug 12922626
9.154 (x86 Only) Live Migration of a VM may be Affected by Guest

Linux Kernel Version
Linux UEK x86_64 2.6.32-100.26.2.el5 as guest kernel does not work well for live migration. Please update
to the latest UEK.
Bug 14276606
9.155 (x86 Only) Improving Mouse Pointer Control in Virtual Machine

Console
When you launch the virtual machine console from Oracle VM Manager you may experience that the
mouse pointer on your local machine and the mouse pointer in the virtual machine travel across the screen
at different speeds.
If your guest virtual machine's operating system is Linux-based, the following workaround may reduce the
mouse control issue. Enter the following on the guest's command line:
# xset m 1 1
9.156 (x86 Only) Solaris 10 Kernel Panic on Some AMD Systems

Virtual machines with the guest operating system Solaris 10 may experience kernel panic on systems with
AMD processors. Kernel panic has been seen in Solaris 10 9/10 (Update 9) and Solaris 10 8/11 (Update
10).
Workaround: To work around this issue:
1. During the installation or first time boot up, edit the grub menu and append the -kd kernel boot
parameter.
2. Continue with the boot to run the Solaris kmdb. When the following screen prompt is displayed:
Welcome to kmdb
[0]>
140
(x86 Only) Solaris 10 Release 8/11 Guest Hangs at Boot
Enter the command:

cmi_no_init/W 1
Enter the following to continue the installation or system boot:

:c
3. After Solaris is installed and booted up, append the following line to the /etc/system file to make this
change persistent across system reboot.
set cmi_no_init = 1
Bug 13332538
9.157 (x86 Only) Solaris 10 Release 8/11 Guest Hangs at Boot

When booting a virtual machine with Oracle Solaris 10 Release 8/11, the guest OS hangs when the
copyright information screen appears. This is caused by a change in CPUID handling in dom0, which
triggers a Solaris bug on platforms with CPUs of the Westmere-EP family.
Workaround: To make Solaris 10 run, kill the virtual machine from Oracle VM Manager and then apply the
following manual fix:
1. At boot, edit the grub menu: append the -kd kernel boot parameter. This runs the Solaris kernel
debugger.
2. Continue the boot sequence up to Solaris kmdb.
3. At the kmdb prompt, enter the following command:

Welcome to kmdb
[0]> apix_enable/W 0
4. Enter :c to continue the system boot sequence.
5. When Solaris has been installed and has successfully booted, make this fix persistent by adding the
following line to /etc/system:
set apix_enable = 0
Bug 13876544
9.158 (x86 Only) Solaris 11 Guest With More Than 2 VCPUs Hangs at
Boot
When booting a virtual machine with running Oracle Solaris 11 and configured with more than 2 virtual
CPUs, the guest OS may hang. This is caused by a Solaris bug related to a change in the Xen hypervisor
that was fixed in Oracle Solaris 11.2 SRU 8.4.
Workaround: To make Solaris 11 run on Oracle VM 3.4 with more than 2 virtual CPUs, either upgrade to
Oracle Solaris 11.2 SRU 8.4 or above, or perform the following steps to implement a manual fix:
1. During the installation or first time boot up, edit the grub menu and append the -kd kernel boot
parameter.
2. Continue with the boot to run the Solaris kmdb. When the following screen prompt is displayed:
141
(x86 Only) Solaris 11 Release 2011.11 Guest Hangs at Boot
Welcome to kmdb
[0]>
Enter the command:

cmi_no_init/W 1
Enter the following to continue the installation or system boot:

:c
3. After Solaris is installed and booted up, append the following line to the /etc/system file to make this
change persistent across system reboot.
set cmi_no_init = 1
Bug 18547858
9.159 (x86 Only) Solaris 11 Release 2011.11 Guest Hangs at Boot

When booting a virtual machine with Oracle Solaris 11 Release 2011.11, the guest OS hangs. This
is caused by a Solaris bug where interrupt storms occur on Intel systems based on Sandy bridge and
Westmere CPUs. The issue has been fixed in Solaris 11 2011.11 SRU 2a.
Workaround: To make Solaris 11 2011.11 run on Oracle VM 3.4, use the SRU 2a, or apply the following
manual fix to the GA release:
1. At boot, edit the grub menu: append the -kd kernel boot parameter. This runs the Solaris kernel
debugger.
2. In the kernel debugger, enter the following commands:

[0]> ::bp pcplusmpàpic_clkinit
[0]> :c
kmdb: stop at pcplusmpàpic_clkinit
kmdb: target stopped at: pcplusmpàpic_clkinit: pushq %rbp
[0]> apic_timer_preferred_mode/W 0
pcplusmpàpic_timer_preferred_mode: 0x2 = 0x0
[0]> :c
3. Continue the system boot sequence.
4. When Solaris has been installed and has successfully booted, make this fix persistent by adding the
following line to /etc/system:
set pcplusmp:apic_timer_preferred_mode = 0x0
For more information, please consult the Support Note with ID 1372094.1. You can also find this document
by logging on to My Oracle Support and searching the knowledge base for 1372094.1.
Bug 13885097
9.160 (x86 Only) Windows Server 2008 R2 x64 HVM Guests do Not
Cleanly Shut Down
Windows Server 2008 Release 2 64-bit hardware virtualized guests fail to shut down cleanly. After the
guest has been shut down, and started again, Windows reports that it was not shut down cleanly.
142
(SPARC Only) Need Actual Available Memory for Live Migration
This is not an issue for Windows Server 2008 Release 2 32-bit hardware virtualized guests with
paravirtualized drivers (PVHVM).
Bug 12658534
9.161 (SPARC Only) Need Actual Available Memory for Live

Migration
If the virtual machine memory is less than the available memory on the Oracle VM Server that the
virtual machine is to be migrated to, the migration may fail with an error message stating that there is
not enough memory available to complete the request. This is due to memory fragmentation on the
target server. The details of this are discussed in http://docs.oracle.com/cd/E35434_01/html/E23807/
migratingactivedomain.html#memory.
Bug 14851322
9.162 (x86 Only) Network Card Limit in Virtual Machines

Oracle VM Manager supports eight network cards for each HVM virtual machine as outlined in Table 7.3
“Virtual Machine Maximums”. However, the system library does not allow users to add more than three
network cards when creating a virtual machine from installation media.
Workaround: After the virtual machine is created, add up to five new network cards by editing the virtual
machine in Oracle VM Manager.
9.163 QLogic cLOM8214 1/10 Gigabit Ethernet NIC Initializes with

Link State Down
On some systems, such as the HP ProLiant DL980 G7 server, the QLogic cLOM8214 1/10GbE NIC
initializes with link state down.
Workaround: To work around this problem install the qlcnic driver module with the option "use_msix=0".
To do this, create the file /etc/modprobe.d/qlcnic.conf and ensure that it contains the following line:
options qlcnic use_msi_x=0
For the change to take effect, you should reboot the server. To temporarily disable the option for the
module without rebooting, you can perform the following steps:
# ifconfig ethx down
# rmmod qlcnic
# modprobe qlcnic use_msi_x=0
Bug 15865548 and 18072952
9.164 Renaming of QLogic cLOM8214 1/10 Gigabit Ethernet NIC is

Incorrect
On some systems at initial install, udev may rename the QLogic cLOM8214 1/10GbE Ethernet port to
__tmpxxxxxxxx. This is due to a slow initialization of the port.
Workaround: Determine which interface name the QLogic cLOM8214 1/10GbE Ethernet NIC should use,
for example eth1. Find the MAC address for the QLogic cLOM8214 1/10GbE Ethernet NIC that you want to
143
(x86 Only) Incorrect ARP Reply When Using Jumbo Frames
configure. You can do this by running the following command and studying its output to find the incorrectly
named interface:
# cat /etc/issue
IF : bond0 MAC : 1c:c1:de:74:b9:34 IP : 10.211.1.135
IF : eth0 MAC : 1c:c1:de:74:b9:34
IF : eth1 MAC : 1c:c1:de:74:b9:35
IF : __tmp713192749 MAC : 24:be:05:ef:5a:f4
In /etc/sysconfig/network-scripts, create an ifcfg-ethx configuration file for the interface

name that you wish to use and ensure that the file contains a line that expresses the MAC address for
the NIC that you want to assign to this interface name. For example, using the example output from the
previous command, you could create a new file at /etc/sysconfig/network-scripts/ifcfg-eth2
with the following contents:
DEVICE=eth2
BOOTPROTO=none
HWADDR=24:BE:05:EF:5A:F4
ONBOOT=yes
Finally, bring up the interface using the ifconfig command. For example:
ifconfig eth2 up
Bug 15897549
9.165 (x86 Only) Incorrect ARP Reply When Using Jumbo Frames
ARP Flux can cause confusion to some 10G switches when using jumbo frames causing network traffic to
stop.
Workaround: disable ARP flux on the affected server. If the interfaces are all on different sub-networks,
run the following command:
# sysctl -w net.ipv4.conf.all.arp_filter=1
If some of the interfaces are on the same sub-network, run the following commands:
# sysctl -w net.ipv4.conf.all.arp_ignore=1
# sysctl -w net.ipv4.conf.all.arp_announce=2
If you wish to make these changes permanent, add the relevant ARP parameter settings to /etc/
sysctl.conf:
net.ipv4.conf.all.arp_filter=1
net.ipv4.conf.all.arp_ignore=1
net.ipv4.conf.all.arp_announce=2
Bug 17982926
9.166 (x86 Only) Changing Cluster Heartbeat Network Does Not

Reflect New IP Address
If you move the Cluster Heartbeat network role to another network, with a different IP address, the change
is not reflected in the Oracle VM Servers.
Workaround: Edit the /etc/ocfs2/cluster.conf file on each Oracle VM Server in the network to
reflect the new IP address, and restart each Oracle VM Server.
144
NFSv4 Read/Write Delegation Not Supported
Bug 12870099
9.167 NFSv4 Read/Write Delegation Not Supported

As of Release 3.3.1, Oracle VM does not support NFS V4 read/write delegation. NFS V4 delegation must
be disabled on network storage devices used for Oracle VM.
The following procedures provide examples for disabling NFS V4 read/write delegation on different network
storage devices. You should refer to the manufacturer's documentation for your storage device to review
additional details.
To disable read/write delegation on an Oracle ZFS Storage Appliance, log in to the browser user interface.
Select Configuration and then Services. Locate and then click NFS. Deselect Enable NFSv4
delegation and then click Apply.
To disable read/write delegation on a NetApp filer, go to the NetApp console. Select FilerView, then
click NFS->Configure. Select no on the following two pull-down menus:
• Enable Read Delegation on NFS Version 4
• Enable Write Delegation on NFS Version 4
Bug 18391474
9.168 (x86 Only) Unclean File System Causes Errors When Used as
a Server Pool File System
If a server pool file system is not clean (contains existing files and server pool cluster information) and used
to create a server pool, a number of errors may occur.
• Cannot create a server pool using the file system. The following error is displayed:
OVMAPI_4010E Attempt to send command: create_pool_filesystem to server: server_name failed.
OVMAPI_4004E Server Failed Command: create_pool_filesystem ... No such file or directory
Bug 12839313
• An OCFS2-based storage repository becomes orphaned (the clusterId that was used when the OCFS2
file system was created no longer exists), you cannot mount or refresh the repository, and the following
error is displayed:
"OVMRU_002037E Cannot present the Repository to server: server_name. Both server and repository
need to be in the same cluster."
Workaround: Clean the file system of all files before it is used as a server pool file system.
Bug 12838839
9.169 (SPARC Only) Agent Fails to Reconcile Multipath LUNS If

Solaris I/O Multipathing is Disabled
If you attempt to configure iSCSI disks that have multiple paths on an Oracle VM Server for which Solaris
I/O Multipathing (MPxIO) has been disabled, the Oracle VM Agent for SPARC incorrectly returns multiple
LUNs to Oracle VM Manager resulting in misconfiguration that could cause unexpected behavior.
145
(x86 Only) Size of New LUN on Server is Incorrect If an Existing LUN Is Unmapped First
Solaris I/O Multipathing should not be disabled on an Oracle VM Server, particularly where that server may
access iSCSI disks with multiple paths.
Bug 18648267
9.170 (x86 Only) Size of New LUN on Server is Incorrect If an

Existing LUN Is Unmapped First
If a LUN belonging to an unmanaged Fibre Channel array is unmapped from a server and a new target is
mapped to it using the same LUN, then after rescanning the physical disks on that server, the size of the
new LUN is set to the size of the LUN that was unmapped.
Remapping LUNs is risky because it can data corruption since the targets have been switched outside of
the server. An error should appear in the messages file:
Warning! Received an indication that the operating parameters on this
target have changed. The Linux SCSI layer does not automatically adjust
these parameters.
Workaround: Ensure that when exposing a new target, you do so with a LUN that has not previously been
used since the last reboot.
Bug 14851579
9.171 (x86 Only) Remapping LUNs Causes Storage Refresh To Hang

If an ISCSI NetApp storage array is refreshed within Oracle VM Manager after a LUN is unmapped at the
array, and then refreshed again after the LUN is mapped back the second refresh may hang.
This is due to the fact that the Oracle VM Server sees the LUN size as zero and fails the multipath path to
the LUN while the default path checker for NetApp TUR sees the path as up. The vacillating path statuses
can cause IO to the affected LUN to hang.
Remapping LUNs is risky because it can data corruption since the targets have been switched outside of
the server.
Workaround: One way to ensure that the Oracle VM Server maintains a consistent view of the path
and avoids a possible hang scenario is to change the path checker for NetApp in mulipath.conf to
directio. Note that directio is not considered as performant as TUR. Running the following command
on the affected Oracle VM Server clears the hang:
# iscsiadm -m node -R
Bug 18421164
9.172 (x86 Only) LUNs Must Be Cleaned Prior to Storage Repository

Creation
When you attempt to create a storage repository on a LUN that was previously used by another clustered
server pool, the operation will fail. This is due to a built-in mechanism that prevents the creation of a new
OCFS2 file system if the disk or partition already contains cluster data.
Workaround: Clear all files and file system information on the LUN before placing a storage repository on
it.
Bug 13806344
146
NetApp ONTAP (8.2 c-mode) Operating System Does Not Work With Oracle VM
9.173 NetApp ONTAP (8.2 c-mode) Operating System Does Not Work
With Oracle VM
The current NetApp ONTAP (8.2 c-mode) operating system has an NFS related issue with the showmount
-e command. This issue prevents Oracle VM from seeing any NFS file systems on a NetApp storage
appliance running this operating system.
NetApp has provided a workaround for ONTAP 8.2 on the NetApp support site. Further instructions are
provided for resolving this issue on My Oracle Support with Doc ID 1640848.1 available at the following
URL:
https://support.oracle.com/epmos/faces/DocumentDisplay?id=1640848.1
You must reapply the workaround after you have upgraded an Oracle VM Server.
Bugs 18098710, 18672536
9.174 (x86 Only) Black Listing of System Disks for Legacy LSI
MegaRAID Controllers Not Supported
Oracle VM Server cannot add the system disks for Legacy LSI MegaRAID (Dell PERC4) bus controllers to
the /etc/blacklisted.wwids file, so the disks are not blacklisted in the multipath configuration. This
occurs because the bus controllers are not capable of returning a unique hardware ID for each disk. Using
system disks on Legacy LSI MegaRAID (Dell PERC4) bus controllers is therefore not supported.
Bug 12944281
9.175 (x86 Only) Blacklisting of System Disks for Multipathing Fails

on HP Smart Array (CCISS) Disk Devices
Installing Oracle VM Server on an HP Smart Array (CCISS) fails to blacklist system disks (they are not
included in the /etc/blacklisted.wwids file). Messages similar to the following are logged in the /
var/log/messages file:
multipathd: /sbin/scsi_id exited with 1
last message repeated 3 times
Workaround: Configure multipathing to blacklist the CCISS system devices by adding a new line to the
multipath.conf file:
# List of device names to discard as not multipath candidates
#
## IMPORTANT for OVS do not remove the black listed devices.
blacklist {
devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st|nbd)[0-9]*"
devnode "^hd[a-z][0-9]*"
devnode "êtherd"
+ devnode "^cciss!c[0-9]d[0-9]*" <<====
%include "/etc/blacklisted.wwids"
}
Note
This workaround is not required for HP Smart Array disks backed by the HPSA
module.
147
(x86 Only) HP Smart Array CCISS Disk Devices Are Not Supported For Creation of Local Storage Repositories
Bug 12722044
9.176 (x86 Only) HP Smart Array CCISS Disk Devices Are Not
Supported For Creation of Local Storage Repositories
HP Smart Array disk devices backed by the older CCISS module are not supported for use as a local
storage repository, or for use as raw disks for virtual machines, or for server pool file systems. HP Smart
Array disk devices backed by the HPSA module are fully supported.
To verify whether the controller has support for the HPSA module, first obtain the PCI ID of the raid
controller for the local disk using the following command:
lspci -vnn|grep "RAID bus controller"
Check the list of controllers supported by the HPSA module to confirm whether or not your controller's PCI
ID appears within the list, by running the following command:
modinfo hpsa -F alias
If your controller is supported, ensure that you use the HPSA module instead of the CCISS module for your
controller.
Bug 16072257
9.177 (x86 Only) Multiple Paths Used in Multipath Environments on

Oracle Pillar Axiom Storage
When performing a fail-over (for example, by disabling one protocol such as Fibre Channel), the paths are
grouped and the traffic flows through all protocols (for example, both Fibre Channel and ISCSI), which is
not as expected. This also occurs with fail-back. This issue occurs in all Oracle VMReleases since 3.1.1.
Workaround: Run the following commands on the Axiom server:

# service multipathd restart
# multipath -v3
Bugs 14329375 and 14314282
9.178 Refreshing a NAS-based File System Produces Invalid/

Overlapping Exports
When a NAS-based file system is refreshed, it may produce invalid or overlapping exports. During a file
system refresh job, all mount points defined in the NAS-based file server's exports file are refreshed, even
file systems that are not intended to be used in Oracle VM environments.
Top level directories which also contain subdirectories in the exports file may also cause problems, for
example, if an export file contains /xyz as an export location, and also contains /xyz/abc. In this case, the
following error may be displayed during a refresh file system job:
OVMRU_002024E Cannot perform operation. File Server: server_name, has invalid exports.
Workaround: For the second issue, to work around this problem, do not export top level file systems in the
NAS-based file server's exports file.
Bug 12800760
148
(x86 Only) Shared OCFS2 Cluster File System on Virtual Disk Not Supported
9.179 (x86 Only) Shared OCFS2 Cluster File System on Virtual Disk
Not Supported
When you create a configuration with virtual machines sharing an OCFS2 cluster file system on a virtual
disk, severe I/O interruptions may occur. These may affect the heartbeating function of a clustered server
pool and even cause Oracle VM Servers to reboot. Therefore, a shared OCFS2 cluster file system on a
virtual disk is not a supported configuration.
Workaround: Use a physical disk or LUN. Make sure that the virtual machines in your configuration have
shared access to this physical disk or LUN, and create the shared OCFS2 cluster file system there.
Bug 13935496
9.180 Virtual Disk Images Must Be Properly Aligned To The OCFS2

Block Size For Performance
If the partitions for a virtual disk are not properly aligned to the OCFS2 block size, OCFS2 serializes I/O
to the virtual disk image resulting in degraded performance. This only affects virtual disk images stored on
OCFS2 repositories and does not apply to NFS repositories.
Workaround: Check for misaligned partitions in the virtual disk images and, if any are found, recreate the
disk images with properly aligned partitions. To determine whether partitions are correctly aligned, use
fdisk -lu to find the starting sectors of the partitions. Ensure that these are a multiple of 8 (512 byte
sectors), which aligns them at 4 KB, the OCFS2 block size.
Note
Many recent operating systems often start the first partition in sector 2048, aligning
it to 1 MB, which works well for most storage RAID stripe sizes.
Bug 14355588
9.181 Oracle VM Manager Command Line Interface Backspace Key

In some command line terminals, the backspace key prints the previous line when the input wraps over two
lines, for example:
OVM> create Vm name=MyVM repository=MyRepository domainType=XEN_HVM startPolicy=
USE_POOL_POLICY on ServerPool name=MyServerPool
Command: create Vm name=MyVM repository=MyRepository domainType=XEN_HVM startPol
icy=USE_POOL_POLICY on ServerPool name=MyServerPool
Status: Success
Time: 2014-03-17 05:25:29,912 CET
JobId: 1395030328969
Data:
id:0004fb0000060000d38427b0b1fd06b7 name:MyVM
Use up arrow key to display previous command.
USE_POOL_POLICY on ServerPool name=MyServerPool
Use backspace key to delete last character from the command.
create Vm name=MyVM repository=MyRepository domainType=XEN_HVM startPolicy=USE_P
OOL_POLICY on ServerPool name=MyServerPoo
The first line of the command is printed again.
Use backspace key again to delete last character from the command.
149
Oracle VM Manager Command Line Interface Allows THIN_CLONE cloneType On NFS

OOL_POLICY on ServerPool name=MyServerPo
The first line of the command is printed again.
While this does not affect the editing or submission of the command, it may be difficult to read the
command being edited. This issue has been seen on some GNOME window managers.
Workaround: Use PuTTY to connect to the CLI. Alternatively, you can use xterm, with the correct
wraparound options. You should enable the xterm auto-wraparound (-aw) and reverse-wraparound (-rw)
options. To set the xterm wraparound options correctly, start xterm with the xterm -aw -rw command.
Bugs 16810639 and 16049754
9.182 Oracle VM Manager Command Line Interface Allows

THIN_CLONE cloneType On NFS
While thin cloning is only supported on OCFS2 file systems and the Oracle VM Manager Web Interface
does not provide the option to create a clone storage mapping for a thin clone on an NFS file system, the
Oracle VM Manager Command Line Interface does not prevent you from doing this. Therefore, a command
similar to the following succeeds:
OVM> create vmclonestorageMapping name=clonestoragemapping
cloneType=THIN_CLONE vmDiskMapping=0004fb0000130000ef5b6a1671333bb3
repository=nfsrepo on vmclonecustomizer name=clonecustomizer1
However, when a clone is created using the clone customizer that this clone storage mapping is attached
to, the action fails due to the fact that the clone target does not support the thin clone cloneType:
OVM> clone vm name=vm1.0 destType=vm serverPool=MyServerPool
cloneCustomizer=clonecustomizer1 targetRepository=nfsrepo
Command: clone vm name=vm1.0 destType=vm serverPool=MyServerPool
cloneCustomizer=clonecustomizer1 targetRepository=nfsrepo
Status: Failure
Time: 2014-05-06 22:40:33,755 PDT
JobId: 1399441233570
Error Msg: Job failed on Core: OVMRU_007013E Cannot thin clone: System.img
(2), to: nfsrepo. The clone target does not support thin cloning. [Tue May 06
22:40:33 PDT 2014]
This is expected behavior, but the flexibility offered by the Oracle VM Manager Command Line Interface is
inconsistent with the Oracle VM Manager Web Interface and can result in misconfiguration by a user.
Bug 18716652
9.183 Untagged VLAN Interface Missing After Upgrade of Oracle VM

Manager
In releases prior to 3.3, if VLAN port group names have one or more commas in them, they may not be
parsed correctly when Oracle VM Manager is doing a re-discover of an Oracle VM Server after Oracle VM
Manager has just been upgraded to 3.3 or 3.4. In the case of an untagged VLAN interface, this can lead
to the VLAN interfaces or the underlying port not being associated with a network in Oracle VM Manager.
However, the Oracle VM Server is still configured correctly.
Performing a re-discover of the Oracle VM Server after the upgrade to 3.3 or 3.4 corrects the view that
Oracle VM Manager has of the network configuration. In version 3.3 and 3.4, VLAN port groups have been
removed. Therefore, once the system is upgraded to version 3.3 or 3.4 and a re-discover is done, the issue
is resolved.
150
Untagged VLAN Interface Missing After Upgrade of Oracle VM Manager
Bug 18758922
151
152
Chapter 10 Additional Software for Oracle VM
Table of Contents
10.1 Oracle VM Paravirtual Drivers for Microsoft Windows ............................................................... 153
10.2 Oracle VM Storage Connect plug-ins ....................................................................................... 153
10.3 Oracle VM Guest Additions ..................................................................................................... 153
10.4 Oracle VM Utilities .................................................................................................................. 153
10.5 Oracle Enterprise Manager ...................................................................................................... 154
10.6 Third Party Software ............................................................................................................... 154
Additional software for Oracle VM includes tools and plugins to help you configure and integrate your
environment.
10.1 Oracle VM Paravirtual Drivers for Microsoft Windows

The Oracle VM Paravirtual Drivers for Microsoft Windows improve performance for network and block
(disk) devices on Microsoft Windows™ guests running in a virtual environment on Oracle VM.
For more information, see the Oracle VM Paravirtual Drivers for Microsoft Windows documentation at:
http://docs.oracle.com/cd/E88077_01/index.html
10.2 Oracle VM Storage Connect plug-ins

Release 3.4 provides full support for the Oracle VM Storage Connect plug-ins that were added in Oracle
VM Release 3.1. Support for iSCSI multipath, which was added in Oracle VM Release 3.2.1, is also fully
supported in this release.
For more information, see Installing Oracle VM Storage Connect plug-ins in the Oracle VM Administrator's
Guide.
10.3 Oracle VM Guest Additions

The Oracle VM Guest Additions are a set of packages that you install on virtual machines in an Oracle VM
environment. The Oracle VM Guest Additions let you communicate with virtual machines from Oracle VM
Manager and provide an easy method to configure virtual machines.
To find more information about the Oracle VM Guest Additions, see:
• Installing and Using the Oracle VM Guest Additions in the Oracle VM Administrator's Guide
• What are the Oracle VM Guest Additions? in the Oracle VM Concepts Guide
10.4 Oracle VM Utilities

The Oracle VM Utilities are a collection of command line scripts that allow you to perform basic
management tasks in an Oracle VM environment. Release 3.4 works with the Oracle VM Utilities version
2.1.
To find more information about the Oracle VM Utilities, see:
153
Oracle Enterprise Manager
• Using the Oracle VM Utilities in the Oracle VM Administrator's Guide
• Oracle VM Utilities in the Oracle VM Concepts Guide
10.5 Oracle Enterprise Manager

Oracle Enterprise Manager Release 13.2 or later is required to manage Oracle VM Release 3.4.x. Oracle
VM Manager integrates with Oracle Enterprise Manager so that you can manage the entire Oracle VM
environment from within Oracle Enterprise Manager.
For more information about Oracle Enterprise Manager Release 13.2 or later, see the Oracle Enterprise
Manager documentation at: http://www.oracle.com/technetwork/oem/grid-control/documentation/
oem-091904.html
For example, for specific information on how to register Oracle VM Manager when setting up Cloud for
Infrastructure as a Service (IaaS), refer to the following section in the Enterprise Manager Release 13.2
Cloud Administration Guide: https://docs.oracle.com/cd/E73210_01/EMCLO/GUID-152C4D4A-6FC2-42B0-
ABE3-5884D6A466F4.htm#EMCLO183
10.6 Third Party Software

Oracle Corporation supports certain third party software in combination with Oracle VM.
For information about supported third party software, see the Oracle VM Partners page at: http://
www.oracle.com/technetwork/server-storage/vm/partners/index.html
Note
If you plan to install third party software in an Oracle VM environment and are not
sure if it is supported, contact your Oracle Corporation support representative.
For information about hardware certified for Oracle VM, see the Hardware Certification List (HCL) for
Oracle Linux and Oracle VM at: https://linux.oracle.com/hardware-certifications.
154
Chapter 11 Oracle VM Accessibility Features
Accessibility features help people who have a physical disability, such as restricted mobility or limited
vision, to use information technology products successfully.
Oracle VM documentation is provided in the following formats:
• Electronic format (HTML) is provided and is accessible.
• PDF format is provided but is not accessible.
• Online Help is provided in Oracle Help for Web (OHW) format for the Oracle VM Manager Web Interface.
This format is accessible but known issues exist. For more information see Documentation Accessibility
Bugs.
Oracle VM Manager Accessibility Features

As part of the effort to make Oracle products, services, and supporting documentation accessible and
usable to the disabled community, Oracle VM Manager Web Interface allows you to configure the following
accessibility features:
• Support for Screen Reader.
• Support for High Contrast.
• Support for Large Fonts.
You can enable these features when logging in to the Oracle VM Manager Web Interface or you can set or
change the accessibility options once you have logged in.
To enable accessibility options when logging in:
1. On the login page of the Oracle VM Manager Web Interface, click the arrow to expand Accessibility
Options.
2. Select one or more check box from the following accessibility options:
• I use a screen reader.
• I use high contrast.
• I use large fonts.
3. Alternatively, if you have already selected specific accessibility options during a previous session,
you are able to restore these settings by ensuring that the 'Use saved accessibility options'
checkbox is checked.
To set or change accessibility options while you are logged in:
1. In the Global Links at the top of the right-hand-side of the Oracle VM Manager Web Interface, click
Settings.
2. From the drop-down list, select from the following accessibility options:
• I use a screen reader.
• I use high contrast.
155
Oracle VM Manager HTML Access Keys
• I use large fonts.
These settings are persistent across each user login, as described in User Preference Persistence. To
ensure that the same settings are applied on each subsequent login you should ensure that the Use
saved accessibility options checkbox is checked on the login page when you login.
Oracle VM Manager HTML Access Keys

To access menus without using a mouse, you can use the HTML access keys. The shortcut key for a
user interface item is shown as an underline of the shortcut key letter in the item name, for example, the
shortcut key for the Servers and VMs tab is S, as that is the letter underlined in the tab text.
To access the shortcut key, enter the HTML access key for your browser, plus the access key letter. For
example, to access a shortcut key on Microsoft Internet Explorer, press Alt + shortcut_key at the same
time. See your web browser documentation to find the key combination to use for HTML access keys for
your browser.
Documentation HTML Access Keys

To use the documentation without using a mouse, you can use HTML access keys. Enter the HTML
access key for your browser, plus the access key letter. For example, using Mozilla Firefox, press Alt+Shift
+n to go to the next page. See your web browser documentation to find the key combination to use for
HTML access keys. The following table lists the tasks you can perform using access keys.
Task Access Key

Go to the next page n
Go to the previous page p
Go to the document home page h
Go up a level in the document u
Activate the Contents tab c
Activate the Search tab s
In addition to the HTML access keys, the following keyboard shortcuts are available:
Task Shortcut
Key
Toggle hide and show the sidebar Ctrl+Left
Arrow
Toggle hide and show page header Ctrl+Up
Arrow
Documentation Accessibility Bugs

Oracle VM documentation currently exhibits the following known accessibility issues:
• HTML page heading levels might not start at h1 (Bug ID 26717728)
• Book title can extend off the screen with 200% zoom (Bug ID 26717874)
• docs.oracle.com Help drawer HTML heading tags have structure violation (Bug ID 26560104)
156
Documentation Accessibility Bugs
• Navigation header/footer uses inaccessible tables (Bug ID 26751108)
• OHW - TOC has no summary defined in Online Help viewer window (Bug ID 26758534)
• OHW - Unable to open TOC topics when using keyboard only functions in Online Help viewer window
(Bug ID 26758747)
157
158

Oracle VM Release Notes For 3.4.6

Uploaded by

Copyright:

Available Formats

Oracle VM Release Notes For 3.4.6

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Oracle VM Release Notes For 3.4.6

Uploaded by

Copyright:

Available Formats

What are the restrictions on using Oracle VM software?

What are the restrictions on using Oracle VM software?

What are the accessibility options available in Oracle VM Manager?

What are the accessibility options available in Oracle VM Manager?

Oracle® VM

Release Notes for 3.4.6

• Oracle VM Release Notes

• Oracle VM Installation and Upgrade Guide

• Oracle VM Concepts Guide

• Oracle VM Manager Getting Started Guide

• Oracle VM Manager User's Guide

• Oracle VM Manager Command Line Interface User's Guide

• Oracle VM Administrator's Guide

• Oracle VM Paravirtual Drivers for Microsoft Windows Guide

• Oracle VM Web Services API Developer's Guide

• Oracle VM Security Guide

• Oracle VM Licensing Information User Manual

braces { } Braces indicate required items:

brackets [ ] Brackets indicate optional items:

ellipses ... Ellipses indicate an arbitrary number of similar items:

vertical line | A vertical line indicates a choice within braces or brackets:

Access to Oracle Support

Oracle VM Server for x86

Oracle VM Server for SPARC

• Installing Oracle VM Server, see Installing Oracle VM Server.

• Installing Oracle VM Manager, see Installing Oracle VM Manager.

• Upgrading between Oracle VM 3.x releases, see Upgrading Oracle VM.

Restrictions for Upgrading

3.1 What's New in Oracle VM Release 3.4.6.1?

New Release Process

• Oracle VM Manager and Oracle VM Agent for SPARC are released

• The latest versions of the Oracle VM Manager and Oracle VM Agent

3.2 What's New in Oracle VM Release 3.4.6?

New Option to Change the Location of a Running Virtual Machine

Increased Virtual CPU Configuration Limit for HVM and PVHVM

• XSA-273 (CVE-2018-3620, CVE-2018-3646)

3.3 What's New in Oracle VM Release 3.4.5?

Performance and Scalability

The following RPM packages are required

Columnar Compression (HCC) on Oracle

• The libxenstore and libxenstore-

For more information, see the Hybrid Columnar Compression section of

Server Upgrade Warning Events Displayed with Blue Icon

Xen 4.4.x Performance and Scalability Updates

• XSA-254 (CVE-2017-5753, CVE-2017-5715, CVE-2017-5754)

3.4 What's New in Oracle VM Release 3.4.4?

and updates: https://docs.oracle.com/cd/E52668_01/E86280/html/

• This release adds the network-scripts-vxlan package.

• The device-mapper-multipath, kpartx, and udev packages

• The irqbalance package is updated to

Performance and Scalability

• XSA-218 (CVE-2017-10913, CVE-2017-10914)

• XSA-224 (CVE-2017-10920, CVE-2017-10921, CVE-2017-10922)

3.5 What's New in Oracle VM Release 3.4.3?

Installation and Upgrades

If you plan to install Oracle VM Server on BIOS-

The following notes apply to using software

• Oracle VM Server supports installation on

• You should not attempt to install Oracle VM