What Are Polymers

What are Polymers?
A polymer is a large molecule or a

macromolecule which essentially is a
combination of many subunits. The term
polymer in Greek means ‘many parts’.
Polymers can be found all around us. From the
strand of our DNA which is a naturally occurring
biopolymer to polypropylene which is used
throughout the world as plastic.
Polymers may be naturally found in plants and
animals (natural polymers) or may be man-
made (synthetic polymers). Different polymers
have a number of unique physical and chemical
properties due to which they find usage in
everyday life.
Table of Content
 Classification of Polymers
 Structure
 Types
 Properties
 Polymers and their Monomers
 Polymerization Reactions
 Molecular Mass of Polymers
 Uses of Polymers
Polymers are all created by the process of polymerization wherein their
constituent elements called monomers, are reacted together to form
polymer chains i.e 3-dimensional networks forming the polymer bonds.
The type of polymerization mechanism used depends on the type

of functional groups attached to the reactants. In biological contexts, almost
all macromolecules are either completely polymeric or are made up of large
polymeric chains.
Classification of Polymers
Polymers cannot be classified under one
category because of their complex structures,
different behaviours, and vast applications. We
can, therefore, classify polymers based on the
following considerations.
Classification of Polymers based on
the Source of Availability
There are three types of classification under this
category, namely, Natural, Synthetic, and Semi-
synthetic Polymers.
Natural Polymers:
They occur naturally and are found in plants and
animals. For example proteins, starch, cellulose, and
rubber. To add up, we also have biodegradable
polymers which are called biopolymers.
Semi-synthetic Polymers:
They are derived from naturally occurring polymers
and undergo further chemical modification. For
example, cellulose nitrate, cellulose acetate.
Synthetic Polymers:
These are man-made polymers. Plastic is the most
common and widely used synthetic polymer. It is
used in industries and various dairy products. For
example, nylon-6, 6, polyethers etc.
Classification of Polymers based on

the Structure of the Monomer Chain
This category has the following classifications:
Linear Polymers
The structure of polymers containing long and
straight chains fall into this category. PVC, i.e. poly-
vinyl chloride is largely used for making pipes and
electric cables is an example of a linear polymer.
Branched-chain Polymers
When linear chains of a polymer form branches,
then, such polymers are categorized as
branched chain polymers. For example, Low-
density polythene.
Cross-linked Polymers
They are composed of bifunctional and trifunctional
monomers. They have a stronger covalent bond in
comparison to other linear polymers. Bakelite and
melamine are examples in this category.
Other Ways to Classify Polymers
Classification Based on Polymerization
 Addition Polymerization: Example, poly

ethane, Teflon, Polyvinyl chloride (PVC)
 Condensation Polymerization: Example,
Nylon -6, 6, perylene, polyesters.
Classification Based on Monomers
 Homomer: In this type, a single type of monomer

unit is present. For example, Polyethene
 Heteropolymer or co-polymer: It consists of
different type of monomer units. For example,
nylon -6, 6
Classification Based on Molecular Forces
 Elastomers: These are rubber-like solids weak

interaction forces are present. For example,
Rubber.
 Fibres: Strong, tough, high tensile strength and

strong forces of interaction are present. For
example, nylon -6, 6.
 Thermoplastics: These have intermediate forces
of attraction. For example, polyvinyl chloride.
 Thermosetting polymers: These polymers greatly
improve the material’s mechanical properties. It
provides enhanced chemical and heat resistance.
For example, phenolics, epoxies, and silicones.
Structure of Polymers
Most of the polymers around us are made up of
a hydrocarbon backbone.
A Hydrocarbon backbone being a long chain of
linked carbon and hydrogen atoms, possible
due to the tetravalent nature of carbon.
A few examples of a hydrocarbon backbone

polymer are polypropylene, polybutylene,
polystyrene. Also, there are polymers which
instead of carbon have other elements in its
backbone. For example, Nylon, which contains
nitrogen atoms in the repeated unit backbone.
Types of Polymers
On the basis of the type of the backbone chain,
polymers can be divided into:
 Organic Polymers: Carbon backbone.

 Inorganic Polymers: Backbone constituted
by elements other than carbon.
Types of Polymers
On the basis of their synthesis:
 Natural Polymers
 Synthetic Polymers
Biodegradable Polymers
The polymers which are degraded and decayed by
microorganisms like bacteria are known
as biodegradable polymers. These types of polymers
are used in surgical bandages, capsule coatings and
in surgery. For example, Poly hydroxybutyrate co vel
[PHBV]
High-Temperature Polymers
These polymers are stable at high temperatures. Due
to their high molecular weight, these are not
destroyed even at very high temperatures. They are
extensively used in the healthcare industries, for
making sterilization equipment and in the
manufacturing of heat and shock-resistant objects.
Few of the important polymers are:
Polypropylene: It is a type of polymer that softens

beyond a specific temperature allowing it to be
moulded and on cooling it solidifies. Due to its ability
to be easily moulded into various shapes, it has a lot
of applications.
A few of which are in stationary equipment’s,

automotive components, reusable containers
speakers and much more. Due to its relatively low
energy surface, the polymer is fused with the welding
process and not using glue.
Polyethene: It is the most common type

of plastic found around us. Mostly used in packaging
from plastic bags to plastic bottles. There are
different types of polyethene but their common
formula being (C2H4)n.
Properties of Polymers
Physical Properties
 As chain length and cross-linking increases the

tensile strength of the polymer increases.
 Polymers do not melt, they change state from
crystalline to semi-crystalline.
Chemical Properties
 Compared to conventional molecules with

different side molecules, the polymer is enabled
with hydrogen bonding and ionic bonding
resulting in better cross-linking strength.
 Dipole-dipole bonding side chains enable the
polymer for high flexibility.
 Polymers with Van der Waals forces linking
chains are known to be weak, but give the
polymer a low melting point.
Optical Properties
 Due to their ability to change their refractive

index with temperature as in the case of PMMA
and HEMA: MMA, they are used in lasers for
applications in spectroscopy and analytical
applications.
Some Polymers and their Monomers
 Polypropene, also known as polypropylene, is

made up of monomer propene.
 Polystyrene is an aromatic polymer, naturally
transparent, made up of monomer styrene.
 Polyvinyl chloride (PVC) is a plastic polymer
made of monomer vinyl chloride.
 The urea-formaldehyde resin is a non-
transparent plastic obtained by heating
formaldehyde and urea.
 Glyptal is made up of monomers ethylene glycol
and phthalic acid.
 Bakelite or
polyoxybenzylmethylenglycolanhydride is a
plastic which is made up of monomers phenol
and aldehyde.
Types of Polymerization Reactions
Addition Polymerization
This is also called as chain growth polymerization. In
this, small monomer units joined to form a giant
polymer. In each step length of chain increases. For
example, Polymerization of ethane in the presence of
Peroxides
Condensation Polymerization
In this type small molecules like H2O, CO,
NH3 are eliminated during polymerization (step
growth polymerization). Generally, organic
compounds containing bifunctional groups such
as idols, -dials, diamines, dicarboxylic acids
undergo this type of polymerization reaction.
For example, Preparation of nylon -6, 6.
What is Copolymerization?
In this process, two different monomers
joined to form a polymer. Synthetic rubbers
are prepared by this polymerization. For
example, BUNA – S.
Uses of Polymers
Here we will list some of the important uses of polymers in our
everyday life.
 Polypropene finds usage in a broad range of industries such

as textiles, packaging, stationery, plastics, aircraft,
construction, rope, toys, etc.
 Polystyrene is one of the most common plastic, actively used
in the packaging industry. Bottles, toys, containers, trays,
disposable glasses and plates, tv cabinets and lids are some
of the daily-used products made up of polystyrene. It is also
used as an insulator.
 The most important use of polyvinyl chloride is the
manufacture of sewage pipes. It is also used as an insulator in
the electric cables.
 Polyvinyl chloride is used in clothing and furniture and has
recently become popular for the construction of doors and
windows as well. It is also used in vinyl flooring.
 Urea-formaldehyde resins are used for making adhesives,
moulds, laminated sheets, unbreakable containers, etc.
 Glyptal is used for making paints, coatings, and lacquers.
 Bakelite is used for making electrical switches, kitchen
products, toys, jewellery, firearms, insulators, computer discs,
etc.
Commercial Uses of Polymers

Polymer Monomer Uses of Polymer
Isoprene (1, 2-methyl 1 – 1, 3- Making tyres, elastic

Rubber
butadiene) materials
BUNA – S (a) 1, 3-butadiene (b) Styrene Synthetic rubber
(a) 1, 3-butadiene (b) Vinyl

BUNA – N Synthetic rubber
Cyanide
Non-stick cookware –
Teflon Tetra Flouro Ethane
plastics
(a) Ethylene glycol (b)

Terylene Fabric
Terephthalic acid
(a) Ethylene glycol (b)

Glyptal Fabric
Phthalic acid
Plastic switches,
Bakelite (a) Phenol (b) Formaldehyde
Mugs, buckets
PVC Vinyl Cyanide Tubes, Pipes
Melamine (a) Melamine (b) Ceramic plastic

Formaldehyde Resin Formaldehyde material
Nylon-6 Caprolactum Fabric

What Are Polymers

Uploaded by

Copyright:

Available Formats

What Are Polymers

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

What Are Polymers

Uploaded by

Copyright:

Available Formats

What are Polymers?

A polymer is a large molecule or a

The type of polymerization mechanism used depends on the type

Classification of Polymers based on

Classification Based on Polymerization

 Addition Polymerization: Example, poly

Classification Based on Monomers

 Homomer: In this type, a single type of monomer

Classification Based on Molecular Forces

 Elastomers: These are rubber-like solids weak

 Fibres: Strong, tough, high tensile strength and

A few examples of a hydrocarbon backbone

 Organic Polymers: Carbon backbone.

Few of the important polymers are:

Polypropylene: It is a type of polymer that softens

A few of which are in stationary equipment’s,

Polyethene: It is the most common type

 As chain length and cross-linking increases the

 Compared to conventional molecules with

 Due to their ability to change their refractive

Some Polymers and their Monomers

 Polypropene, also known as polypropylene, is

Types of Polymerization Reactions

 Polypropene finds usage in a broad range of industries such

Commercial Uses of Polymers

Isoprene (1, 2-methyl 1 – 1, 3- Making tyres, elastic

BUNA – S (a) 1, 3-butadiene (b) Styrene Synthetic rubber

(a) 1, 3-butadiene (b) Vinyl

(a) Ethylene glycol (b)

(a) Ethylene glycol (b)

Melamine (a) Melamine (b) Ceramic plastic

Nylon-6 Caprolactum Fabric

You might also like