0% found this document useful (0 votes)
292 views1 page

Marcus Table

This document contains several tables related to plumbing codes and fixture unit calculations: Table 6-5 lists plumbing fixtures and their equivalent fixture unit and drainage fixture unit values. Table 7-2 lists minimum trap sizes and drainage fixture units by fixture type. Table 7-4 provides requirements for cleanouts including location and size based on pipe size. The tables provide specifications for drainage systems, including maximum length and fixture unit loading for drain and vent piping (Table 7-5), discharge capacity by pipe size (Table 7-3), horizontal distance limitations for trap arms (Table 10-1), and permissible connections and sizes for boiler blowoffs, condenser waste and sump connections (Table 8-1).

Uploaded by

Marcus Austria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
292 views1 page

Marcus Table

This document contains several tables related to plumbing codes and fixture unit calculations: Table 6-5 lists plumbing fixtures and their equivalent fixture unit and drainage fixture unit values. Table 7-2 lists minimum trap sizes and drainage fixture units by fixture type. Table 7-4 provides requirements for cleanouts including location and size based on pipe size. The tables provide specifications for drainage systems, including maximum length and fixture unit loading for drain and vent piping (Table 7-5), discharge capacity by pipe size (Table 7-3), horizontal distance limitations for trap arms (Table 10-1), and permissible connections and sizes for boiler blowoffs, condenser waste and sump connections (Table 8-1).

Uploaded by

Marcus Austria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TABLE 6-5 & A-1 EQUIVALENT WSFU & DEMAND Table 7-2 MIN TRAP DIAMETERS AND DFU

ERS AND DFU Table 7-4 CLEANOUTS TABLE B-1 LOC SDS
WEIGHT OF FIXTURES No. Fixture DFU Size Pipe Cleanout TPI MIN BS ST DF SP/C
Fixture type2 WSFU3 Min Dental units or cuspidors 1 32 size B&S 0.6 1.5 2.4 2.4
connection Drinking fountains 1 32 3 27
Private Public Cold Hot 6 18 PL CLEAR 1.5 1.5 2.4
Receptors (floor sinks), indirect waste receptors for 1 38
Dental unit or - 1 10 - ref, coffee urns, water stn, etc 10 18 WSW 15.2 15.2 30.5 45.7
cuspidor Sinks, bar private 38mm min waste 1 38 13 14 S 15.2 15.2 15.2 30.5
Sink (wash-up, each - 2 13 13 Wash basin (lavatory) single 1 32 19 14
T - 3 - 3
set of faucets) Bathtubs 2 38 25 11-1/2
Urinal with flush - 3 - - Bidets 2 38 32 11-1/2 SP/C - 1.5 1.5 1.5
tank Laundry tubs 2 38 38 38 11-1/2 DF - 1.5 1.2 1.5
Sink (wash-up - 4 Sinks,and/or dishwasher (residential) 51mm min 2 38 51 38 11-1/2
OSDWSL .3 1.5 1.5 1.5
circular spray) waste 64 64 8
Urinal wall - 5 13 - Sinks, bar, comm’l 51mm min waste 2 38 76 64 8 DB - - 1.5 1.5
Urinal stall - 5 19 - Urinal, washout, wall mounted, separate trap 2 38 102 & 89 8 PPWL 3 3 3 3
Urinal, pedestal - 10 25 - 50.8mm min waste larger
Bedpan washer - 10 25 - Wash basins, in sets 2 38
Clotheswashers 2 51 MARCUS CEAZAR V. AUSTRIA, ECE, CE, MP
Sink (flushing rim, - 10
clinic) Floor drains 2 51 www.masterplumber.coach
Combination sink & 3 - 13 13 Shower, single stall 2 51
Shower, gang (1 unit per head) 51 Table 7-1 MAX HOT WATER
tray Working load
Urinal, stall, separate trap 2 51 TRAP LOADING CONSUMPTION
Bar sink 1 2 of hot water
Urinal, washdown or siphon jet, wall-mounted, 2 51 Size F.U. bldg g/ps/hr
Lavatory 1 2 10 10 bldg Ave.
integral trap, trap arm only 32 1 S 2-3 WL
Dental lavatory 1 2 13 13
Comm’l or ind’l, schools sinks, etc., including 3 38 38 3 SOI 25%
Drinking fountain 1 2 10 - O 4-5
dishwashers, wash up sinks, and fountains 50.8 mm
Bathtub4 2 4 13 13 waste 51 4 F 4-6 AR 35%
Bidet 2 4 13 13 Interceptors for grease, oil, etc 3 51 76 6 HResto 50%
A 8
Kitchen sink 2 4 13 13 Receptors, indirect waste receptors for comm’l sinks, 3 51 102 8
dishwashers, air washers, etc H 8-10
Laundry tray (1or2 2 4 13 13
compts) Sink, service 3 51 R 10
Shower, each head4 2 4 13 13 Urinal, wall mounted, integral trap, trap arm only 3 51
Sink, service 2 4 13 13 Water closet, private 4 76 Table 8-1 PIPE CONNECTIONS IN BLOWOFF
Hose bibb or sill cock 3 5 Water closet,public 6 76 CONDENSERS & SUMPS
(std type) Interceptors for sand, auto wash, etc 6 76 Boiler blowoff Water outlet Size of vent
Water closet: Flush 3 5 10 - Sink, flushing rim, clinic 6 76 19 19 51
tank Mobile home park traps (1 for ea trailer) 6 76 25.4 25.4 64
Water closet: 3 5 10 - Urinal, pedestal, trap arm only 6 76 32 32 76
Flushometer-tank Urinal, blowout, wall-mounted, integral trap, trap 6 76 38 38 102
Water closet: 6 10 25 - arm only 51 51 127
Flushometer valve 64 64 152
Mobile Home (each) 6 6
TABLE 7-5 MAX FU LOADING AND MAX LENGTH OF EXC DRAIN AND VENT PIPING
TABLE 7-3 DISCHARGE Size 32 38 51 65 76 102 127 152 203 254 305 REFRIGERATION WASTE
TABLE 10-1 HORIZONTAL
CAPACITY 32 not more
DISTANCE OF TRAP ARMS Ver 1 2 16 32 48 256 600 1380 3600 5600 8400
L/s F.U. than 2.8m3
Trap arm dia Dist to Vent Hor 1 2 8 14 35 216 428 720 2640 4680 8200
Up to 0.47 1 32 0.76 Length 14 20 26 45 65 91 119 155 228 51 4-12m3
0.5 – 0.95 2 38 1.07 Max 1 8 24 48 84 256 600 1380 3600 76 13-36m3
51 1.52 FU
1.0 – 1.89 4
76 1.83 Length 14 18 37 55 65 91 119 155 228
1.95 – 3.15 6 102 & up 3.05

MARCUS CEAZAR V. AUSTRIA, ECE, CE, MP


www.masterplumber.coach

You might also like