Portable Gas Analyzers

Accuracy Matters

To make informed decisions on site, you need fast and reliable data.

Myrkos portable gas analyzers provide lab quality DGA data.

Where you need it, when you need it:

• In remote locations or whenever on-site diagnosis is required

• To confirm monitoring data
• When frequent oil testing is required on aging transformers

Myrkos is the most accurate portable gas analyzer on the

market:

Minimizes human
Lowest detection Proven gas error in sampling,
limits chromatography extraction and
(GC) technology measurement

Extraction and gas

Interference-free measurement
Built-in diagnostics measurement technologies
and solubility of 9 gases in all recognized by ASTM
coefficients common oil types 3612 Method C and
IEC 60567 standards

Standard Warranty

PPMreport™ Software
Myrkos portable gas analyzers include PPMreport™ software, which transforms DGA results into
useful transformer diagnoses, generates DGA reports in PDF format and exports data to Morgan
Schaffer’s advanced diagnostic software, Inside View.
Speed and Ease of Use Matter

• Accurate results in just 2 minutes

• Everything you need in one convenient carrying case
• On-screen oil sampling and gas extraction instructions
• Single syringe used for sampling, gas extraction and gas measurement
• Daily calibration
• 7-hour battery life

Myrkos Field Package

• Easy portability, set-up and operation
• Maximizes operator productivity
• 7 hours of cordless operation
• Over 40 hours of operation between carrier
gas refills
• Flexible data management and analysis
using on-board controller (included)

Myrkos Lab Package

• Lab quality results
• Maximizes throughput of laboratory DGA
analyses
• Enables laboratories to optimize resources
and minimize cost per sample
• Integrates easily into any laboratory QMS
and standard procedures
We did it first.
We still do it best.

More than 50 years

of DGA expertise.

Cost Reduction Also Matters

Myrkos portable gas analyzers are an effective cost reduction tool:

• Confirm the presence of faults in the event of a monitor alarm

• Minimize downtime on false alarms
• Optimize maintenance schedules
• Monitor condition of transformers known to have faults
• Diagnose critical equipment during re-energizing or commissioning
• Allow cost-effective diagnosis of smaller transformers

Inside View diagnostic software

Inside View, the most comprehensive DGA and dielectric oil diagnostic software on the market,
integrates data from any brand of online monitor or portable analyzer and oil testing lab.

• Centralize data for fast and easy accessibility

• Perform accurate oil test data interpretation
• Deploy a configurable health index
• Receive only necessary alerts
DGA Accuracy.
Where you need it.
When you need it.
 Accuracy in everything we do.

Morgan Schaffer’s commitment is not limited to our equipment.

We also ensure excellence in all of our activities:

• On-time delivery
• Superior technical support
• Responsiveness and customer service
• Repair services
• Quality assurance across the board

For more information about Calisto online DGA monitors

or to request a demo unit, please contact us at:

Head Office Morgan Schaffer USA

8300 Saint Patrick Street 101 Henderson Drive

Suite 150 Sharon Hill, Pennsylvania, USA 19079
LaSalle, Quebec, Canada H8N 2H1 Tel: 1.215.279.5915
Tel: 1.514.739.1967 Toll-Free: 1.855.861.1967
Toll-Free: 1.855.861.1967 E-mail: [email protected]
Fax: 1.514.739.0434
E-mail: [email protected]

Accreditations
Morgan Schaffer is ISO/IEC 17025:2005 accredited in Canada by the Canadian Standards Council for the tests
listed on its scope of accreditation. Morgan Schaffer USA accreditation is forthcoming.
Morgan Schaffer is ISO 9001:2008 certified.

© 2015 Morgan Schaffer Inc. All rights reserved. The Morgan Schaffer logo is a trademark of Morgan Schaffer Inc.

www.morganschaffer.com
PORTABLE GAS ANALYZER

Technical Specifications Myrkos Instrument

Performance
Measurement technology Dual-channel gas chromatograph
Micro-machined injectors and TCD detectors
Shake Test® sampling and gas extraction1
Gases measured H2 (hydrogen) CH4 (methane)
C2H6 (ethane) C2H4 (ethylene)
C2H2 (acetylene) CO (carbon monoxide)
CO2 (carbon dioxide) O2 (oxygen)
N2 (nitrogen)
Gas-in-oil* measurement range H2: 5 - 60,000 ppm
Other fault gases: 1 - 60,000 ppm
O2: 60 - 100,000 ppm
N2: 500 - 100,000 ppm

Gas-in-oiI* repeatabiIity2 H2: greater of ±2 ppm or ±2%

CO2: greater of ±10 ppm or ±2%
Other fault gases: greater of ±2 ppm or ± 2%
O2: ±60 ppm or ±2%
N2: ±500 ppm or ±2%
Gas-in-oil* accuracy3 H2: greater of ±5 ppm or ±6%
CO2: greater of ±10 ppm or ±6%
Other fault gases: greater of ±2 ppm or ±6%
O2: ±60 ppm or ±6%
N2: ±500 ppm or ±6%
*Gas-in-oil specifications encompass instrument-to-instrument, syringe-to-syringe and gas extraction method uncertainties.
Resolution All gases: 1 ppm
Measurement time 2 minutes
Calibration Morgan Schaffer CALGAS with NIST traceability
Sampling 100 ml Shake Test® syringe for oil samples
10 ml glass syringe for gas samples from relay, tank or PTFE membrane
Room temperature injection
Sample integrity Used as directed, individual syringes ensure no gas loss and
no cross-contamination
Automatic line purging with internal sampling pump
Gas filtering Disposable oil traps (5 μm)
Replaceable particle trap (10 μm)
Communication and Data
Connectivity Direct or networked TCP/IP Ethernet
Interface software Morgan Schaffer PPMreportTM (Windows XP / Vista / Windows 7 / Windows 8 /
Windows 10) provides instrument control, data acquisition, data management,
DGA diagnostic tools and customizable PDF reports.
DGA data management and diagnostics Inside View diagnostic software integrates DGA data from monitors and
portable analyzers with laboratory oil quality data.
Diagnostic tools for fleetwide transformer health management
(sold separately).
Operation
Power supply In-line power adaptor with IEC 60320/Cl 4 receptacle / Power supply
Input: 100 - 240 VAC, 50/60 Hz, 100 W, 1Ø / Output: 24 VDC, 6.2 A
8 ft power cord with IEC 60320/Cl 3 to NEMA 5-l 5P
Gas requirements 99.999% He, 80 psig
Operating temperature range (standard) 0 to 50 °C
Storage temperature range 0 to 75 °C
Humidity range 5 - 95% RH non-condensing
Elevation range Up to 4,500 m (15,000 ft)
Cooling Forced air convection
Maintenance Annual visual inspection
Expected operating life 10 years
Construction
Width x Height x Depth 250 x 155 x 420 mm (9.8 x 6.1 x 16.5 in.)
Weight 10 kg / 22 lbs
Enclosure Cast aluminum frame, aluminum covers, powder coat paint,
carrying handle
Ruggedness Drop-tested to 1 m
Conformities
Directives Low Voltage Directive 2006/95/EC Directives
EMC Directive 2004/108/EC
CE Marking
Safety IEC / EN 61010-1: 2001
EMC rating IEC 61326-1: 2005 / EN 61326-1: 2006
CISPR 11: 2003 / EN 55011: 1998 + A1: 1999 + A2: 2002
Standard Package
Myrkos Analyzer Myrkos Portable DGA Analyzer
PPMreportTM interface software, certificate, user manual
Myrkos Calibration Kit Gas-tight glass syringe (10 cc)
NIST traceable CALGAS cylinder (500 cc)
Micro-flow regulator with dial gauge
CO2 trap for air run
Myrkos Oil Sampling Kit Shake Test® syringe (100 cc)
Myrkos Oil Sampling Kit bag of oil traps (25/bag)
CO2 trap for Shake Test®
Myrkos Squirt Method Kit Squirt stopper
Squirt tube
Other Accessories Shake Test® syringe holder
Tool and connection kits
Warranty
Morgan Schaffer’s Myrkos analyzer is backed by a 30-month standard warranty.
Service and Support
On-site commissioning assistance and on-site maintenance program available upon request.
Notes
1 - The Shake Test® Method is a variation of ASTM D3612-02 Method C and is also described in the international standard IEC 60567.
2 - 95% confidence interval
3 - 95% confidence interval in comparison with Morgan Schaffer’s ISO/IEC 17025 accredited laboratory.
Product improvements since the writing of IEC 60567: 2005 have led to the improved accuracy specifications provided here.

Continuing research and improvements may result in specification or appearance changes at any time.

www.morganschaffer.com
©2015 Morgan Schaffer Inc. All rights reserved. The MS Morgan Schaffer logo is a trademark of Morgan Schaffer Inc. Myrkos_Inst_Spec_EN2015
PORTABLE GAS ANALYZER

Technical Specifications Field Package

Standard Field Package (in addition to the Myrkos Instrument)
Carrying case Made of high-performance HDPE
Press and pull latches, padlockable
Rugged in-line wheels and telescopic handle
Rain, immersion and vibration proof
795 x 518 x 310 mm (31.3 x 20.4 x 12.2 in.)
Li-ion rechargeable battery 24 VDC operation
7 hours autonomy
1.4 kg (3.1 lbs)
Cycle life > 300 cycles
LCD state of charge indicator
Includes a charge control module with a universal power adaptor
Includes the battery to Myrkos power cable

Miniature portable controller 10.1 in. screen size

6-cell Li-ion battery, 10.5 hours autonomy
Preloaded with PPMreportTM, support documentation and instrument
method file
Back-up files provided on SD card
1.5-foot RJ45 crossover patch cable

Carrier gas module 42 hours of helium autonomy

(helium 99.999% min.) Built-in quick-connect port for O2-N2 measurements
Removable for easy off-site refill
Shake Test® syringe carrying case (for 2) Holds 2 fully-extended Shake Test® syringes
Fits inside the Myrkos carrying case
Includes the squirt kit and one CO2 trap

Shake Test® syringe carrying case (for 6) Holds 6 fully-extended Shake Test® syringes
Protects syringes against damage
High-pressure filling line Connection kit to refill the carrier gas module (with CGA 580)
Safety relief valve preset to 1,800 psig

Other accessories Shake Test® syringe holder support

5 additional Shake Test® syringes
3 additional oil trap bags (25/bag)
Set-up and operation guide

Operation
Set-up Intuitive and ergonomic design
Large plateau for convenient operation using miniature portable controller

Instrument protection Includes a lid stay to prevent unintended closing during operation
Manual reset over-temperature protection
Weight 27.8 kg (61.5 lbs)
 PORTABLE GAS ANALYZER

Technical Specifications Lab Package

Standard Lab Package (in addition to the Myrkos Instrument)
Syringe shaker Automated Shake Test® sample extraction
Safe syringe clip-on installation
Holds up to 3 Shake Test® syringes
One-button 2-minute operation with automatic stop
110/220 VAC 50/60 Hz
02-N2 measurement bench top kit Built-in ergonomic extraction gas port with shut-off valve
4-ft ⅛ in. copper connection line with brass tee

Shake Test® syringe carrying case (for 6) Holds 6 fully extended Shake Test® syringes
Protects the syringes against damage

Two-stage helium pressure regulator CGA 580 connection

High-pressure output stability (preset to 80 psig)
4-ft ⅛ in. copper connection line with one-way valve
Other accessories 5 additional Shake Test® syringes
3 additional oil trap bags (25/bag)
Options and Accessories
Shake Test® syringe Method compliant with ASTM D3612-02 and described in IEC 60567 standard
100 cc, individually serialized
12 VDC/120 VAC vehicle inverter Pure sine, 300 W connects to standard vehicle 12 VDC source
On-site training session 1-day on-site training session provided by Morgan Schaffer qualified personnel

Extended warranty Extended warranties from 3 to 5 years available

Consumables
NIST traceable CALGAS cylinder (500 cc), suitable for 200 calibrations
Bag of oil traps (25/bag)
Spare Parts
Li-ion rechargeable battery (Field Package only)
Support for the Shake Test® syringe holder (Field Package only)
Battery charger w/universal AC adaptor (Field Package only)
Gas-tight glass syringe (10 cc)
CO2 trap for air run
CO2 trap for Shake Test®
3-way valve stopcock (20/bag)

Head Office Morgan Schaffer USA

8300 Saint-Patrick Street, Suite 150 101 Henderson Drive
LaSalle, Quebec, Canada H8N 2H1 Sharon Hill, Pennsylvania, USA 19079
Tel: 1.514.739.1967 Tel: 1.215.279.5915
Toll-Free: 1.855.861.1967 Toll-Free: 1.855.861.1967
Fax: +1 514.739.0434
E-mail: [email protected]
E-mail: [email protected]

Accreditation

Morgan Schaffer is ISO/IEC 17025:2005 accredited by the Standards Council of Canada for the tests
listed on the scope of accreditation. Morgan Schaffer USA accreditation is forthcoming.
Morgan Schaffer is certified ISO 9001:2008

www.morganschaffer.com
© 2015 Morgan Schaffer Inc. All rights reserved. The MS Morgan Schaffer logo is a trademark of Morgan Schaffer Inc. Myrkos_Field-Lab_Spec_EN2015