Device Support

24C Family :
Serial EEPROM
24C00,
24C01,
Programmer
24C02,
24C04,
24C08,
24C16,
24C32, Ideal for reading and changing car radio EEPROMs, TV repair, QA in production, field
24C64, updates, product configuration, design debugging and much more.
24C128, This is a complete EEPROM programming solution, unlike other products on the market. It
24C256,
provides support not only for the simple 24Cxx devices that use I2C
24C512,
24C1024 communications but also supports 25Cxx versions using SPI and 93Cxx, which
program via Microwire.
25C Family : The programmer has intelligence to deal with equivalent devices from different
manufacturers so you do not have to worry about changing supplier, and also
25C010, supports 3.3V or 5V programming for even more flexibility.
25C020,
25C040, Software
25C080,
25C160,
25C320,
25C640

93C Family :

93C06,
93C46,
93C56,
93C66,
93C76,
93C86

The software has support for Windows 95/98/ME/NT/XP and features Kanda's easy to use
graphical user interface. The simple layout not only simplifies operations but also makes it
easy to set up complicated features such as Status Register settings on the 25Cxx devices
and allows different addressing modes to be selected, especially useful on 93Cxx devices.
The software includes project files that can be saved and loaded which allows easy
swapping between different jobs. Auto-detect of different file types (Intel Hex, Tektronix,
Motorola etc) coupled with different file save options gives you control of your data. The neat
data buffer allows data to be loaded from a file or a device so that it can be viewed or
edited, in Hex or ASCII characters - alternatively just type your data straight in to the buffer!

Operation

Once data has been loaded, either from a file or from a device, or just typed in, the single
key press Verify function lets you quickly and easily verify other devices. Auto programming
using a single key press makes repeated operations very simple as you can choose to
include file reload, device erase, program and verify functions in the Auto Program Options.
CRC checksum generation gives confidence in programming reliability, and the Status report
allows a whole programming session to be reviewed. A flashing red indicator on the screen
immediately and clearly shows any errors.
Supports devices PC Interface
from any
manufacturer The standard Kanda PC interface allows connection to the Serial or Parallel port on the PC
including Fairchild, for maximum flexibility and the low profile and small size makes connection easy. The 1
Atmel, ST, metre (39 inches) cable means no more scrabbling around behind your PC.
Microchip, Xicor, The cable terminates in our standard 10-way connector which features interleaved ground
Catalyst and many lines for maximum EMC noise immunity and improved reliability. It is very simple to alter the
more.
connector to suit your own connection purposes e.g. 3 way edge connector or flying leads
for In System programming, or alternatively it plugs straight into our programming board
24C Family : I2C
Devices from any (see below) which has a built-in external interface.
manufacturer MCU RESET
24C00, 24C01, The programmer also allows you to connect a MCU Reset line (RST), which gives far more
24C02, 24C04, adaptability during In System operations as any microcontroller in the
24C08, 24C16, circuit can be held in reset whilst the EEPROM is read or programmed. This MCU Reset
24C32, 24C64, line can be easily configured to deal with microcontrollers with high or low reset circuitry.
24C128, 24C256,
24C512, 24C1024 ISP Interface
D C B RST A
25C Family : SPI 24CXXX 25CXXX 93CXXX
Devices from any
manufacturer A N/C SI DI
25C010, 25C020, B N/C CS (bar) CS
25C040, 25C080,
25C160, 25C320, C SCL SCK CLK
25C640
GND Vcc D SDA SO DO
93C Family :
Microwire Devices Optional Programming board
from any manufac-
turer. Note : some The standard programmer can be supplemented with our programming board. This board is
variation in cleverly designed for ease of use and features a 28 way ZIF socket giving different,
availability of clearly separated, programming positions for each EEPROM family (24C, 25C and 93C).
8-bit/16-bit Also included are simple jumpers for 3.3 or 5V operation and
addressing modes 16-bit or 8-bit addressing for 93C family. The board requires a
on
9 to 15 V DC supply, using a 3.5 mm barrel connector. A
equivalent devices
from
6-way 0.1 inch (2.54 mm) pin header is supplied for simple
different external connection to user circuits for In Application
manufacturers programming if preferred. As well as ground and MCU Reset
lines, 4 connections are supplied for different programming pro-
93C06, 93C46, tocols (I2C, Microwire or SPI).
93C56, 93C66,
93C76, 93C86 Ordering Information

PART PART NO.

Standard Programmer EEISP
Programmer + Programming board EEPROG
We can provide quotes for customised DLL or command line versions for integration into test
or production software systems. Please call sales or email [email protected] for details.

Embedded Results Ltd Tel: +44 (0) 8707 446 807

P.O. Box 200 Fax: +44 (0) 8707 446 807
Aberystwyth, Email: [email protected]
SY23 2WD UK Web: www.kanda.com