Scribd Logo
Upload

Welcome to Scribd!

  • 3K views

    AQU4518R21V06

    Uploaded by

    luca_allegretti
    This document provides specifications for an 8-port antenna with 4 integrated remote electrical tilt (RET) units. Key details include: - It operates in 4 frequency bands between 1710-2690 MHz with vertically polarized beams that can be electrically downtilted from 0-12 degrees individually per band. - Key electrical specifications include a gain of 17.2-18.3 dBi, side lobe suppression above 18 dB, and beamwidths between 60-68 degrees. - Mechanically, it is 1499mm high x 449mm wide x 115mm deep and weighs 23.9kg. It can support masts from 50-115mm and withstand winds up to 200km/h.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AQU4518R21V06

    Uploaded by

    luca_allegretti
    3K views2 pages
    This document provides specifications for an 8-port antenna with 4 integrated remote electrical tilt (RET) units. Key details include: - It operates in 4 frequency bands between 1710-2690 MHz with vertically polarized beams that can be electrically downtilted from 0-12 degrees individually per band. - Key electrical specifications include a gain of 17.2-18.3 dBi, side lobe suppression above 18 dB, and beamwidths between 60-68 degrees. - Mechanically, it is 1499mm high x 449mm wide x 115mm deep and weighs 23.9kg. It can support masts from 50-115mm and withstand winds up to 200km/h.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for an 8-port antenna with 4 integrated remote electrical tilt (RET) units. Key details include: - It operates in 4 frequency bands between 1710-2690 MHz with vertically polarized beams that can be electrically downtilted from 0-12 degrees individually per band. - Key electrical specifications include a gain of 17.2-18.3 dBi, side lobe suppression above 18 dB, and beamwidths between 60-68 degrees. - Mechanically, it is 1499mm high x 449mm wide x 115mm deep and weighs 23.9kg. It can support masts from 50-115mm and withstand winds up to 200km/h.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3K views2 pages

    AQU4518R21V06

    Uploaded by

    luca_allegretti
    This document provides specifications for an 8-port antenna with 4 integrated remote electrical tilt (RET) units. Key details include: - It operates in 4 frequency bands between 1710-2690 MHz with vertically polarized beams that can be electrically downtilted from 0-12 degrees individually per band. - Key electrical specifications include a gain of 17.2-18.3 dBi, side lobe suppression above 18 dB, and beamwidths between 60-68 degrees. - Mechanically, it is 1499mm high x 449mm wide x 115mm deep and weighs 23.9kg. It can support masts from 50-115mm and withstand winds up to 200km/h.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65-

    18i/18i/18i/18i-M/M/M/M-R
    EasyRET 8-Port Antenna with 4 Integrated RCUs - 1.4m
    Model: AQU4518R21v06

    Antenna Specifications
    Electrical Properties
    4 x (1710 - 2690)
    Frequency range (MHz)
    1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
    Polarization +45° , -45°

    High Band
    2-8 Ports
    Electrical downtilt (°) 0 - 12 , continuously adjustable, each band separately
    at mid Tilt 17.4 17.7 17.9 18.3
    Gain (dBi)
    over all Tilts 17.2 ±0.5 17.5 ±0.5 17.7 ±0.5 18.0 ±0.5
    Side lobe suppression for first
    > 18 > 18 > 19 > 20
    side lobe above main beam (dB)
    Horizontal 3dB beam width (°) 68 ±5 64 ±5 61 ±5 60 ±5
    Vertical 3dB beam width (°) 6.8 ±0.5 6.1 ±0.4 5.4 ±0.4 5.0 ±0.3
    VSWR < 1.5
    Cross polar isolation (dB) ≥ 28
    Interband isolation (dB) ≥ 28 (1710 - 2690 // 1710 - 2690 MHz)
    Front to back ratio, ±30° (dB) > 27 > 28 > 28 > 28
    Cross polar ratio (dB) 0° > 22 > 22 > 22 > 23
    Max. power per input (W) 250 (at 50℃ ambient temperature)
    Total power (W) 800 (at 50℃ ambient temperature)
    Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
    Impedance (Ω) 50
    Grounding DC Ground

    1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


    2. Electrical datasheet in XML format is available.

    Mechanical Properties
    Antenna dimensions (H x W x D) (mm) 1499 x 449 x 115 106

    Packing dimensions (H x W x D) (mm) 1835 x 510 x 185


    Antenna weight (kg) 23.9
    Clamps weight (kg) 3.6 (2 units)
    Antenna packing weight (kg) 35.8 (included clamps)
    Mast diameter supported (mm) 50 - 115
    1385

    Radome material Fiberglass


    1499

    Radome colour Light grey


    Operational temperature (℃) -40 .. +65
    Frontal: 775 (at 150 km/h)
    Wind load (N) Lateral: 90 (at 150 km/h)
    Rear side: 870 (at 150 km/h)
    Max. operational wind speed (km/h) 200
    Survival wind speed (km/h) 250
    Connector 8 x 4.3-10 Female
    Connector position Bottom

    Accessories
    Item Model Description Weight Units per antenna

    Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 16 ° 2.1 kg 1 (Separate packing)

    65
    DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65-
    18i/18i/18i/18i-M/M/M/M-R
    EasyRET 8-Port Antenna with 4 Integrated RCUs - 1.4m
    Model: AQU4518R21v06

    Integrated RET Specifications

    Properties
    RET type Integrated RET
    RET protocols* AISG 2.0 / 3GPP
    Input voltage range (V) 10 - 30 DC
    < 6 (motor activated, 12V)
    Power consumption (W)
    < 1.5 (stand by, 12V)
    Adjustment time (full range) (s) < 65 (typically, depending on antenna type)
    4 x 8 pin connector according to IEC 60130-9
    RET connector
    Daisy chain in: Male / Daisy chain out: Female
    1 2 3 4 5 6 7 8
    Pin assignment according AISG
    DC n/c RS-485B n/c RS-485A DC DC return n/c
    3 (10/350 μs)
    Lightning protection (kA)
    10 (8/20 μs)
    * Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
    antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
    details about protocol switching function, contact Huawei before system installation.

    Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission),
    EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
    Certification: CE, FCC, IC, RCM

    Integrated RET S/N:


    HWMxxx……….yL
    HWMxxx…....yyCL
    yL yyCL yyyCR yyyyR
    HWMxxx…..yyyCR
    HWMxxx…...yyyyR

    y – Yellow L - Left array


    R - Right array C - Center array

    Pattern sample for reference

    1710 - 2690 MHz 1710 - 2690 MHz


    (Left) (Center Left)

    66

    You might also like