Synergi Gas Standard Training - DNV GL

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6
At a glance
Powered by AI
The key takeaways of this training are to gain both working and theoretical knowledge of Synergi Gas software which is used to model natural gas pipelines and networks.

The purpose of this training course is to provide engineers and technicians with the knowledge to effectively and efficiently use Synergi Gas software to plan, design, and analyze natural gas pipelines and networks.

The training covers topics such as model settings, workspaces, basemaps, reports, demand files, subsystems, facility types including pipes, valves, and regulators, and hydraulic theory and the operation of network components.

DIGITAL SOLUTIONS / TRAINING / SYNERGI ASSET OPTI CONTACT US:

SY-25 Synergi Gas REGISTER HERE 

standard training Training offered on request

REQUEST TRAINING 

WHEN:

25 February - 27 Febru 

Add to calendar

Available dates and venues


This course is designed for
engineers or experienced
technicians who are responsible DURATION: 3 days
for planning, design or analysis
of natural gas pipelines and PREREQUISITE: A basic level
networks of proficiency in the Microsoft
Windows environment is
assumed. The number and
SHARE:     relative experience levels of
the attendees will dictate the
content of the course.
Description
This course is designed for engineers or COURSE: SY-25 Synergi Gas
experienced technicians who are responsible for
planning, design or analysis of natural gas standard training
pipelines and networks. Course material and
examples focus on standard Synergi functionality,
analysis of models, hydraulic theory and the
operation of the physical components of a
network. It is a perfect blend of lecture and hands-
on workshops to ensure that you take away the
knowledge to effectively and efficiently use the
product.

The following topics are


covered:
— Model settings
— Workspaces and equipment warehouse
— Basemaps
— Reports
— Exchange files
— Demand files
— Subsystems and printing
— Facility types discussed in detail include pipes,
valves and regulators

If time allows, regulator stations may also be


covered. You will take away a helpful binder full of
the lecture slides and workshops to refer to at a
later date, along with the training files on a flash
drive.

Learning objectives
To gain both working and theoretical knowledge of
Synergi Gas gas distribution software.

Target group
Engineers, planners, and technicians who will be
using Synergi Gas to model natural gas pipelines
and networks. In addition, managers will benefit
from learning the program’s capabilities. Users
who have had training on older versions of the
software will find most of the course a review, but
will benefit from hands-on work with the most
recent release plus the ability to work through any
lingering issues in a classroom environment.

Description
This course is designed for engineers or experienced technicians who are responsible for
planning, design or analysis of natural gas pipelines and networks. Course material and
examples focus on standard Synergi functionality, analysis of models, hydraulic theory and
the operation of the physical components of a network. It is a perfect blend of lecture and
hands-on workshops to ensure that you take away the knowledge to effectively and
efficiently use the product.

The following topics are covered:


— Model settings
— Workspaces and equipment warehouse
— Basemaps
— Reports
— Exchange files
— Demand files
— Subsystems and printing
— Facility types discussed in detail include pipes, valves and regulators

If time allows, regulator stations may also be covered. You will take away a helpful binder
full of the lecture slides and workshops to refer to at a later date, along with the training
files on a flash drive.

Learning objectives
To gain both working and theoretical knowledge of Synergi Gas gas distribution software.

Target group
Engineers, planners, and technicians who will be using Synergi Gas to model natural gas
pipelines and networks. In addition, managers will benefit from learning the program’s
capabilities. Users who have had training on older versions of the software will find most of

the course a review, but will benefit from hands-on work with the most recent release plus
the ability to work through any lingering issues in a classroom environment.

Available dates and venues


Dates Venue Register by Course fee Computer

25-27 DNV GL office, 03 February USD 2550 per Laptop


February 2020 Mechanicsburg, 2020 person, provided by
PA, USA including DNV GL
lunch
(excluding tax)
or free with
M&S places

21-23 April DNV GL office, 30 March USD 2550 per Laptop


2020 Mechanicsburg, 2020 person, provided by
PA, USA including DNV GL
lunch
(excluding tax)
or free with
M&S places

28-30 April DNV GL office, 14 April 2020 GBP 1500 per Laptop
2020 Loughborough, person, provided by
UK including DNV GL
lunch
(excluding tax)
or free with
M&S places

23-25 June DNV GL office, 01 June 2020 USD 2550 per Laptop
2020 Mechanicsburg, person, provided by
PA, USA including DNV GL
lunch
(excluding tax)
or free with
M&S places

25-27 August DNV GL office, 03 August USD 2550 per Laptop


2020 Mechanicsburg, 2020 person, provided by
PA, USA including DNV GL
lunch
(excluding tax)
or free with
M&S places

01-03 DNV GL office, 15 November GBP 1500 per Laptop


December Loughborough, 2020 person, provided by
2020 UK including DNV GL
lunch
(excluding tax)
or free with
M&S places

Learn more about our Synergi Gas training


Explore training and read more about Synergi Gas

 Training  Certificate  Synergi  Consulting


description of Gas -
SY-25 training Read Simulation
Synergi Issued more and
Gas about
upon Optimization
standard completion advanced Analytical
training of the hydraulic solutions
training. modelling for the
Register software energy
here. and
utility
industries

SY-25 Synergi Gas


standard training
REGISTER HERE 

You might also like