Scribd
Upload
86 views

Arrayconfig

This document provides information about the logical and physical devices in a RAID configuration. It summarizes: - There is 1 logical device configured as RAID 1 with 2 segments of 7628800 MB HDDs. - There are 4 physical devices detected: 2 HDDs and 2 SSDs connected via SATA, with no errors reported. - Device information includes model, serial number, capacity, temperature and other details for each physical device.

Uploaded by

bill
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
86 views

Arrayconfig

This document provides information about the logical and physical devices in a RAID configuration. It summarizes: - There is 1 logical device configured as RAID 1 with 2 segments of 7628800 MB HDDs. - There are 4 physical devices detected: 2 HDDs and 2 SSDs connected via SATA, with no errors reported. - Device information includes model, serial number, capacity, temperature and other details for each physical device.

Uploaded by

bill
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

PS C:\Users\Administrator> cd c:\cmdline

PS C:\cmdline> ./arcconf GETCONFIG 1 LD


Controllers found: 1
----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical Device number 0
Logical Device name : LogicalDrv 0
Block Size of member drives : 512 Bytes
RAID level : 1
Unique Identifier : D3FF7C52
Status of Logical Device : Optimal
Additional details : Quick initialized
Size : 7628790 MB
Parity space : 7628800 MB
Interface Type : Serial ATA
Device Type : HDD
Read-cache setting : Enabled
Read-cache status : On
Write-cache setting : Enabled
Write-cache status : On
Partitioned : Yes
Protected by Hot-Spare : No
Bootable : Yes
Failed stripes : No
Power settings : Disabled
--------------------------------------------------------
Logical Device segment information
--------------------------------------------------------
Segment 0 : Present (7630885MB, SATA, HDD,
Connector:0, Device:0) 2YK8NP3D
Segment 1 : Present (7630885MB, SATA, HDD,
Connector:0, Device:1) JEJ7EPSN

Command completed successfully.


PS C:\cmdline> ./arcconf GETCONFIG 1 PD
Controllers found: 1
----------------------------------------------------------------------
Physical Device information
----------------------------------------------------------------------
Device #0
Device is a Hard drive
State : Online
Block Size : 512 Bytes
Supported : Yes
Programmed Max Speed : SATA 6.0 Gb/s
Transfer Speed : SATA 6.0 Gb/s
Reported Channel,Device(T:L) : 0,0(0:0)
Reported Location : Connector 0, Device 0
Vendor : ATA
Model : HGST HUH721008AL
Firmware : T384LHGN
Serial number : 2YK8NP3D
World-wide name : 5000CCA273EE371D
Reserved Size : 2135320 KB
Used Size : 7628800 MB
Unused Size : 64 KB
Total Size : 7630885 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Power State : Full rpm
Supported Power States : Full rpm,Powered off,Reduced rpm
SSD : No
Temperature : 32 C/ 89 F
NCQ status : Enabled
----------------------------------------------------------------
Device Phy Information
----------------------------------------------------------------
Phy #0
PHY Identifier : 0
SAS Address : 30000D1705258203
Attached PHY Identifier : 3
Attached SAS Address : 50000D1705258200
----------------------------------------------------------------
Runtime Error Counters
----------------------------------------------------------------
Hardware Error Count : 0
Medium Error Count : 0
Parity Error Count : 0
Link Failure Count : 0
Aborted Command Count : 0
SMART Warning Count : 0

Device #1
Device is a Hard drive
State : Online
Block Size : 512 Bytes
Supported : Yes
Programmed Max Speed : SATA 6.0 Gb/s
Transfer Speed : SATA 6.0 Gb/s
Reported Channel,Device(T:L) : 0,1(1:0)
Reported Location : Connector 0, Device 1
Vendor : ATA
Model : HGST HUH721008AL
Firmware : T384LHGN
Serial number : JEJ7EPSN
World-wide name : 5000CCA267DF910A
Reserved Size : 2135320 KB
Used Size : 7628800 MB
Unused Size : 64 KB
Total Size : 7630885 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Power State : Full rpm
Supported Power States : Full rpm,Powered off,Reduced rpm
SSD : No
Temperature : 34 C/ 93 F
NCQ status : Enabled
----------------------------------------------------------------
Device Phy Information
----------------------------------------------------------------
Phy #0
PHY Identifier : 0
SAS Address : 30000D1705258202
Attached PHY Identifier : 2
Attached SAS Address : 50000D1705258200
----------------------------------------------------------------
Runtime Error Counters
----------------------------------------------------------------
Hardware Error Count : 0
Medium Error Count : 0
Parity Error Count : 0
Link Failure Count : 0
Aborted Command Count : 0
SMART Warning Count : 0

Device #2
Device is a Hard drive
State : Ready
Block Size : 512 Bytes
Supported : Yes
Programmed Max Speed : SATA 6.0 Gb/s
Transfer Speed : SATA 6.0 Gb/s
Reported Channel,Device(T:L) : 0,2(2:0)
Reported Location : Connector 0, Device 2
Vendor : ATA
Model : INTEL SSDSC2KW01
Firmware : 0B1C LHF
Serial number : BTLA809505791P0EGN
Reserved Size : 911640 KB
Used Size : 0 MB
Unused Size : 975872 MB
Total Size : 976762 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Power State : Full rpm
Supported Power States : Full power,Powered off,Standby
SSD : Yes
Temperature : 35 C/ 95 F
NCQ status : Enabled
----------------------------------------------------------------
Device Phy Information
----------------------------------------------------------------
Phy #0
PHY Identifier : 0
SAS Address : 30000D1705258200
Attached PHY Identifier : 0
Attached SAS Address : 50000D1705258200
----------------------------------------------------------------
Runtime Error Counters
----------------------------------------------------------------
Hardware Error Count : 0
Medium Error Count : 0
Parity Error Count : 0
Link Failure Count : 0
Aborted Command Count : 0
SMART Warning Count : 0

Device #3
Device is a Hard drive
State : Ready
Block Size : 512 Bytes
Supported : Yes
Programmed Max Speed : SATA 6.0 Gb/s
Transfer Speed : SATA 6.0 Gb/s
Reported Channel,Device(T:L) : 0,3(3:0)
Reported Location : Connector 0, Device 3
Vendor : ATA
Model : INTEL SSDSC2KW01
Firmware : 0B1C LHF
Serial number : BTLA809502WZ1P0EGN
Reserved Size : 911640 KB
Used Size : 0 MB
Unused Size : 975872 MB
Total Size : 976762 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Power State : Full rpm
Supported Power States : Full power,Powered off,Standby
SSD : Yes
Temperature : 35 C/ 95 F
NCQ status : Enabled
----------------------------------------------------------------
Device Phy Information
----------------------------------------------------------------
Phy #0
PHY Identifier : 0
SAS Address : 30000D1705258201
Attached PHY Identifier : 1
Attached SAS Address : 50000D1705258200
----------------------------------------------------------------
Runtime Error Counters
----------------------------------------------------------------
Hardware Error Count : 0
Medium Error Count : 0
Parity Error Count : 0
Link Failure Count : 0
Aborted Command Count : 0
SMART Warning Count : 0

Command completed successfully.


PS C:\cmdline>

You might also like