Assignments
? Assignments in Controls
? Assignment 1: Usage of TEXTBOX & COMMAND BUTTON
Objective: Creation of a form using Text box and Command button controls, in which
the text “Starting of Visual Basic” should appear in the Textbox, on clicking
the command but ton OK
TextBox
Command Button
Steps for designing the above form
? Open new form in your project by clicking Project>>Add form, then selecting the
form option.
? Click on object text box in tool and drag it to blank form.
? Adjust the size of text box.
? Click on object command button and drag it to blank form.
? Adjust the size of command button.
? Set the properties of two objects as follows:
Object Property Value Code
Textbox Name txtString
Text <Empty>
Command Name cmdOK txtString.Text=”Starting of Visual
Button1 Basic”
Caption OK
? Save and execute the form.
Training Division, NIC, New Delhi
R 1
Assignments
? Assignment 2: Usage of Frame, Check box and Radio Buttons with
the Text box
Objective: Conversion of text in Upper-case or in a Lower-case, Bold, Italic and
Underline as desired.
Text Box
Radio Button Check Box
Frame
Steps for designing the above form
? Open new form in your project by clicking Project>>Add form, then selecting the
form option.
? Create the following objects in the blank form:
Object Property Value Code
Text Box Name txtInput
Text <Empty>
Radio Button1 Name Option1 Private Sub Option1_Click( )
If Option1.Value = True Then
Caption UpperCase txtInput.Text = UCase(txtInput.Text)
End If
End Sub
Radio Button2 Name Option2 Private Sub Option2_Click( )
If Option2.Value = True Then
Caption LowerCase txtInput.Text = LCase(txtInput .Text)
End If
End Sub
Training Division, NIC, New Delhi
R 2
Assignments
Click Box1 Name Checkbold Private Sub checkbold_Click( )
If checkbold.Value = 1Then
Caption Bold txtInput.FontBold = True
Else
txtInput.FontBold = False
End If
End Sub
Click Box2 Name Checkitalic Private Sub checkitalic_Click( )
If checkitalic.Value = 1 Then
Caption Italic txtInput.Fontitalic = True
Else
txtInput.Fontitalic = False
End If
End Sub
Click Box3 Name checkUnder Private Sub checkUnderline_Click( )
line If checkUnderline.Value = 1 Then
Caption txtInput.FontUnderline = True
Underline Else
txtInput.FontUnderline = False
End If
End Sub
Text Box Text <Empty>
? Click on Run button or run the project from Run>> Start.
? Type desired text in a Text Box then click the buttons on the form and see the output.
Training Division, NIC, New Delhi
R 3
Assignments
? Assignment 3: Usage of List Box and Combo box
Objective: Creation of a form to add list of items to Combo box and list box through
entry in the Text box
Combo Box
List Box
Steps for designing the above form
? Open new form in your project by clicking Project>>Add form, then selecting the
form option.
? Create the following objects in the blank form:
Object Property Value Code
Text Box Name txtBox
Text <Empty>
Command Name cmdAddItem Private Sub CmdAddItem_Click( )
Button1 Dim Data As String
Caption Add Item to Data = txtBox.Text
List lstBox.AddItem Data
cboBox.AddItem Data
End Sub
List Box Name lstBox
ComboBox Name cboBox
? Click on Run button or Run project from RUN menu then click Start.
? Type Apple in Text Box and click the button Add Item to List.
? Similarly, continue adding items to the List Box and Combo Box
Now Both item will be add to list box and as well as in the combo Boxes
Training Division, NIC, New Delhi
R 4
Assignments
? Assignment 4: Usage of OLE Control (Object Linking and
Embedding)
Objective: To create a form to make a two way link with an object in another Windows
application.
Steps for designing the above form
? Open new form in your project by clicking Project>>Add form, then selecting the
form option.
? Create the following objects in the blank form:
Object Property Value Code
Label Caption Use of OLE
Font Bold, Size 14
Command 1 Caption Quit Private Sub Command1_Click( )
Button End
End Sub
Training Division, NIC, New Delhi
R 5
Assignments
OLE1 BorderStyle 0- None
Control Appearance 0- Flat
BackColor Light Grey
OLE2 BorderStyle 0- None
Control Appearance 0- Flat
BackColor Light Grey
OLE3 BorderStyle 0- None
Control Appearance 0- Flat
BackColor Light Grey
? When you select OLE object from tools box and drag it to the form, the following
screen appears.
? Scroll down the list of objects, and click on Microsoft Word
? Check Display as Icon
? Click OK to close the Insert Object dialog box and to open MS Word.
? Type in some matter in MS Word and exit.
? Resize object label if desired.
? Repeat same steps for MS Excel etc..
You can select a file also by clicking on “Create from a file” button.
Training Division, NIC, New Delhi
R 6
Assignments
? Assignment 5: Usage of TIMER Control (Setting of Time)
Objective: To set the time limit for the execution of your program
Steps for designing the above form
? Open new form in your project by clicking Project>>Add form, then selecting the
form option.
? Create the following objects in the blank form:
Object Property Value Code
Timer1 Caption Timer Private Sub Timer1_Timer( )
MsgBox (“Sorry, Yo ur time is up.”)
Interval 1500 End Sub
Lable Caption Use of OLE
Font Bold, Size 14
Command 1 Caption Quit Private Sub Command1_Click( )
Button If Text1.Text = “secret” Then
Timer1.Enabled = False
MsgBox (“Welcome To the
System”)
Else
MsgBox (“Sorry, Friend, I don’t
know you.”)
End If
End Sub
? Now run the program.
? Enter the Password and see the output.
Training Division, NIC, New Delhi
R 7
Assignments
? Assignments in Programming
? Assignment 1. Use of Assigning Values to Variables
Objective: Selection of a Drive from Drive List box, a folder from Directory Listbox,
Image file from the filelistbox of the folder and viewing of the selected image
in the image Control Space.
Drive List Box
Directory ListBox Image Control
File ListBox
Fig. 1
Steps for designing the above form
? Open new form in your project by clicking Project>>Add form, and then
selecting the Form option.
? Bring the following objects in the blank form and set their respective properties:
Object Properties Value Code
Drive listbox Name Drive1 Private Sub Drive1_Change( )
Dir1.path = Drive1.Drive
End Sub
Directorylistbox Name Dir1 Private Sub Dir1_Click( )
File1.path = Dir1.Path
End Sub
Image Control Name Image1
Stretch True
Filelistbox Name File1 Private Sub File1_Click( )
SelectFile = File1.path & “\” & File1.filename
Image1.Picture= LoadPicture(SelectFile)
End Sub
Note: Ensure that `Click’ event procedure is selected
? Save and execute the form.
Training Division, NIC, New Delhi
R 8
Assignments
? Assignment 2 Use of If...Then…Else, decision structure.
Example 1: Lucky Seven
Fig. 2
Description: In this form, when Spin button is clicked, three numbers appear in the
labels. In case any of the numbers is 7, the picture of Coins appears, otherwise it
does not.
Code for Spin button:
Private Sub cmdSpin_Click()
Image1.Visible = False
Label1.Caption = Int(Rnd * 10)
Label2.Caption = Int(Rnd * 10)
Label3.Caption = Int(Rnd * 10)
If (Label1.Caption = 7) Or (Label2.Caption = 7) Or (Label3.Caption = 7) Then
Image1.Visible = True
Beep
End If
End Sub
Hint: Get the picture of Coins from the file:
C:\Program Files\Microsoft Visual Studio\Common\Graphics\Metafile\Business\Coins
Training Division, NIC, New Delhi
R 9
Assignments
? Assignment 3 Use of If...Then…Else, decision structure (contd.).
Example 2: Age factor
Fig. 3
Description: In this form, you are supposed to type your age in the text box and
then press the Submit button. Based on the age typed, some message will appear
in the label below. Next you may click on the Type Again button and the cursor
flashes in the text box. Try putting different ages and see the results.
Code for Submit Button
Private Sub cmdSubmit_Click()
Dim Age As Integer
Age = txtAge.Text
If Age >= 13 And Age < 20 Then
lblMessage.Caption = "You are a teenager"
ElseIf Age <= 12 Then
lblMessage.Caption = "That's a nice Age to be"
ElseIf Age >= 21 And Age < 58 Then
lblMessage.Caption = "Need to be More Responsible"
ElseIf Age >= 59 Then
lblMessage.Caption = "Now is the time to retire and relax "
End If
End Sub
Code for Type Again Button
txtAge.Text = ""
lblMessage.Caption = ""
txtAge.SetFocus
Training Division, NIC, New Delhi
R 10
Assignments
? Assignment 4 Use of Select Case Decision Structure
Fig. 4
Objective: The functionality of this form, as discussed before, can also be achieved
with the help of another decision structure called Select Case.
Description: Same as in Examp le 2, Assignment 3
Code for Submit button (using Select Case )
Private Sub cmdSubmit_Click()
Age = txtAge.Text
Select Case Age
Case Is < 13
lblMessage.Caption = "That's a nice age to be"
Case 13 To 19
lblMessage.Caption = "You are a teenager"
Case 20 To 58
lblMessage.Caption = "Need to be More responsible now"
Case Is > 58
lblMessage.Caption = "Enjoy retired but Fruitful life"
End Select
End Sub
Code for Type Again Button
txtAge.Text = ""
lblMessage.Caption = ""
txtAge.SetFocus
Training Division, NIC, New Delhi
R 11
Assignments
? Assignment 4 Use of For….Next Loop
Fig. 5
Description: When the Loop button is clicked, the text "NIC" appears in different
font sizes, line by line.
Code for Loop Button
Private Sub cmdLoop_Click()
Dim Count As Integer
For Count = 1 To 10
FontSize = 10 + Count
Print "NIC"; Count
Next Count
End Sub
Try this: For …Step…Next Loop
In the above example, replace
For Count = 1 To 10
FontSize = 10 + Count
Print "NIC"; Count
Next Count
with
For Count = 10 To 20 Step 2
FontSize = 10 + Count
Print "NIC"; Count
Next Count
and run the form to see the results
Training Division, NIC, New Delhi
R 12
Assignments
? Assignment 5 Use of Do…While Loop
Fig. 5
Description: When the Loop button is clicked, the text "NIC" appears in different
font sizes, line by line.
Code for Loop Button
Private Sub cmdLoop_Click()
Dim Count As Integer
For Count = 1 To 10
FontSize = 10 + Count
Print "NIC"; Count
Next Count
End Sub
Try this: For …Step…Next Loop
In the above exa mple, replace
For Count = 1 To 10
FontSize = 10 + Count
Print "NIC"; Count
Next Count
with
For Count = 10 To 20 Step 2
FontSize = 10 + Count
Print "NIC"; Count
Next Count
and run the form to see the results
Training Division, NIC, New Delhi
R 13
Assignments
? Assignment 6 Use of Do While…Loop
Fig. 6
Description : When the Do..While option is clicked under Loops menu , a dialog box
appears. Here upper limit of the numbers has to be entered and OK button is clicked.
As a result, list of the numbers starting from 1 to the upper limit will be printed on the
main form.
Code for Do…While menu item under Loops menu
Private Sub doopt1_Click()
Dim x, p As Integer
x = InputBox("Enter the max limit")
Do While p < x
p=p+1
Print p
Loop
End Sub
In the above example replace
Dim x, p As Integer
x = InputBox("Enter the max limit")
Do While p < x
p=p+1
Print p
Loop
with
Dim x, p As Integer
x = InputBox("Enter the max limit")
Do Until p = x
Training Division, NIC, New Delhi
R 14
Assignments
p=p+1
Print p
Loop
For trying for Do until..Loop and then replace the same code with the following code for
While..Wend loop
Dim x, p As Integer
x = InputBox("Enter the max limit")
While p < x
p=p+1
Print p
Wend
Training Division, NIC, New Delhi
R 15
Assignments
? Assignment 7 Use of Arrays
Fig. 7
Description : Create array of 10 text boxes and a button with caption RESET on the
form. When Arrays menu item is clicked table of 2 will be printed in the text boxex
created.
Code in the Form load event
Private Sub Form_Load()
Command1.Visible = False
For i = 0 To 9
Text1(i).Visible = False
Next
End Sub
Code Arrays menu item
Private Sub cmdarrays_Click()
Command1.Visible = True
For i = 1 To 10
Text1(i - 1).Visible = True
Text1(i - 1).Text = "2 * " & i & " = " & 2 * i
Next
End Sub
Training Division, NIC, New Delhi
R 16
Assignments
Code for RESET button on the main form
Private Sub Command1_Click()
Command1.Visible = False
For i = 0 To 9
Text1(i).Visible = False
Next
End Sub
Training Division, NIC, New Delhi
R 17
Assignments
? Assignments in MDI Forms
? Open the Project.
? Select Project>>Add MDI Form. MDI Form will appear as shown below :
? Create the menu on the above form as shown in tree given below
? Create two normal forms whose interfaces are as shown below
In this example NorthWind database already available as sample with Microsoft products
is used.
Training Division, NIC, New Delhi
R 18
Assignments
Set the MDIChild property to TRUE for both the forms.
? Write the following piece of code on the respective forms
EMPLOYEE Form :
Public cnn As ADODB.Connection
Public rst As ADODB.Recordset
Private Sub Form_Load()
Set cnn = New ADODB.Connection
cnn.Open _
ConnectionString:="Provider=Microsoft.Jet.OLEDB.3.51;" & _
"Data Source=C:\Program Files\Microsoft Visual Studio\VB98\Nwind.mdb"
Set rst = New ADODB.Recordset
rst.Open Source:="employees", ActiveConnection:=cnn, _
CursorType:=adOpenDyanamic, LockType:=adLockOptimistic, _
Options:=adCmdTable
Call movefield
End Sub
Sub movefield()
rst.MoveNext
Text1.Text = rst!employeeid
Text2.Text = rst!firstname
Text3.Text = rst!birthdate
End Sub
Sub moveprev()
rst.MovePrevious
Text1.Text = rst!employeeid
Text2.Text = rst!firstname
Text3.Text = rst!birthdate
End Sub
CUSTOMER Form :
Public cnn As ADODB.Connection
Public rst As ADODB.Recordset
Private Sub Form_Load()
Set cnn = New ADODB.Connection
cnn.Open _
ConnectionString:="Provider=Microsoft.Jet.OLEDB.3.51;" & _
"Data Source=C:\Program Files\Microsoft Visual Studio\VB98\Nwind.mdb"
Set rst = New ADODB.Recordset
rst.Open Source:="customers", ActiveConnection:=cnn, _
CursorType:=adOpenDyanamic, LockType:=adLockOptimistic, _
Options:=adCmdTable
Call movefield
Training Division, NIC, New Delhi
R 19
Assignments
End Sub
Sub movefield()
rst.MoveNext
Text1.Text = rst!customerid
Text2.Text = rst!CompanyName
End Sub
Sub moveprev()
rst.MovePrevious
Text1.Text = rst!customerid
Text2.Text = rst!CompanyName
End Sub
? Write the following code in the MDI Form
Private Sub mnucas_Click() (Option : Window>>Cascade)
MDIForm1.Arrange vbCascade
End Sub
Private Sub mnuForm1_Click() (Option : Data Editing >> Customer Details)
Form1.Show
End Sub
Private Sub mnuform2_Click() (Option : Data Editing >> Employee Details)
Form2.Show
End Sub
Private Sub mnunext_Click() (Option : Navigation>>Move Next)
ActiveForm.movefield
End Sub
Private Sub mnuprev_Click() (Option : Navigation>>Move Previous)
ActiveForm.moveprev
End Sub
Private Sub mnutile_Click() (Option : Window>>Tile)
MDIForm1.Arrange vbTileHorizontal
End Sub
? Make the MDI Form as startup object.
? Run the Project.
Training Division, NIC, New Delhi
R 20
Assignments
? Sample Code to List a field in the Data Combo using the
component Microsoft DataList Control 6.0 (OLEDB)
In this sample database is lying at SQL server named cabin785a, with the name
coursedata. Table name is course, field name is title.
Way 1: By setting the properties
Step 1: Add ADO Data Control from Project>>Components to the Toolbox.
Step 2: Create ADO on the form and set its properties to connect it to the above stated
specifications.
Step 3: Add Microsoft DataList Control 6.0 (OLEDB) from Project>>Components to the
Toolbox.
Step 4: Create DataCombo on the form and set its following properties:
Property Value
RowSource Adodc1(Name of ADO control)
ListField Title
Way 2: Through ADO Programming
Dim cnn As New ADODB.Connection
Dim rs As ADODB.Recordset
Set cnn = New ADODB.Connection
cnn.ConnectionString = _
"Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial
Catalog=coursedata;Data Source=cabin785a"
cnn.Open
Set rs = New ADODB.Recordset
rs.Open Source:="course", ActiveConnection:=cnn, CursorType:=adOpenKeyset,
LockType:=adLockOptimistic, Options:=adCmdTable
Set DataCombo1.RowSource = rs
DataCombo1.ListField = "title"
Training Division, NIC, New Delhi
R 21
