Scribd
Upload
537 views1 page

SET 2 - CNC Operator Turning

The document provides instructions for using a CNC machine to turn, face, and finish an aluminum metal piece according to given dimensions, with chamfers at 45 degrees where required and a tolerance of ±1.2mm for the finished workpiece.

Uploaded by

tvaprasad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
537 views1 page

SET 2 - CNC Operator Turning

The document provides instructions for using a CNC machine to turn, face, and finish an aluminum metal piece according to given dimensions, with chamfers at 45 degrees where required and a tolerance of ±1.2mm for the finished workpiece.

Uploaded by

tvaprasad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CSC/Q0115: CNC Operator – Turning

Practical Question:

Using a CNC machine perform turning, facing and finishing on an aluminium metal
piece to achieve the shape given as per the dimensions mentioned.
Note: 1) All dimensions in millimeters.
2) Chamfer at an angle of 45° wherever required.
3) Tolerance for the given workpiece is ±1.2mm.

You might also like