Scribd Logo
Upload

Welcome to Scribd!

  • 66 views

    Unilift AP12.40.08.A1

    Uploaded by

    Rabindra Singh
    This document provides specifications for a Unilift AP12.40.08.A1 submersible drainage pump. The pump is a single-stage stainless steel pump with a vertical discharge port, integrated 1-phase motor, and thermal overload protection. It has a semi-open impeller for 12mm passage, double shaft seal, cooling jacket, and greased ball bearings. The pump is supplied with a 10m cable and is rated for flows of 3.04 l/s at a head of 10.17m, with a power input of 1.3kW.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Unilift AP12.40.08.A1

    Uploaded by

    Rabindra Singh
    66 views3 pages
    This document provides specifications for a Unilift AP12.40.08.A1 submersible drainage pump. The pump is a single-stage stainless steel pump with a vertical discharge port, integrated 1-phase motor, and thermal overload protection. It has a semi-open impeller for 12mm passage, double shaft seal, cooling jacket, and greased ball bearings. The pump is supplied with a 10m cable and is rated for flows of 3.04 l/s at a head of 10.17m, with a power input of 1.3kW.

    Original Description:

    Unilift_AP12.40.08.A1

    Original Title

    Unilift_AP12.40.08.A1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a Unilift AP12.40.08.A1 submersible drainage pump. The pump is a single-stage stainless steel pump with a vertical discharge port, integrated 1-phase motor, and thermal overload protection. It has a semi-open impeller for 12mm passage, double shaft seal, cooling jacket, and greased ball bearings. The pump is supplied with a 10m cable and is rated for flows of 3.04 l/s at a head of 10.17m, with a power input of 1.3kW.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    66 views3 pages

    Unilift AP12.40.08.A1

    Uploaded by

    Rabindra Singh
    This document provides specifications for a Unilift AP12.40.08.A1 submersible drainage pump. The pump is a single-stage stainless steel pump with a vertical discharge port, integrated 1-phase motor, and thermal overload protection. It has a semi-open impeller for 12mm passage, double shaft seal, cooling jacket, and greased ball bearings. The pump is supplied with a 10m cable and is rated for flows of 3.04 l/s at a head of 10.17m, with a power input of 1.3kW.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    Company name:

    Created by:
    Phone:

    Date: 30/07/2019
    Qty. Description
    1 Unilift AP12.40.08.A1

    Note! Product picture may differ from actual product


    Product No.: 96010980
    Submersible drainage pump type

    Vertical single-stage stainless steel submersible


    pump with vertical discharge port and integrated
    submersible 1-phase totally enclosed motor
    in insulation class F with thermal overload
    protection.

    The pump is fitted with suction strainer and


    level switch for automatic start and stop.

    The impeller is a SEMI OPEN impeller for


    12 mm free passage suitable for pumping
    groundwater, surface water, rain water and
    similar.

    The pump has a double shaft seal and an


    intermediate oil chamber pre-filled with non-toxic
    special oil.

    The pump has a riser pipe, a cooling jacket for


    continuous cooling of the motor by the pumped
    liquid and long-life deep-groove greased-for-life
    ball bearings.

    The pump is ready for use as it is fitted with


    carrying handle and is supplied with a
    10 m mains cable. The mains cable is of
    the plug type with glass sealing compound in the
    socket to prevent penetration of humidity into
    the stator windings.

    Liquid:
    Pumped liquid: Any Newtonian liquid
    Liquid temperature range: 0 .. 55 °C
    Density at selected liquid temperature: 998.2 kg/m³

    Technical:
    Actual calculated flow: 3.04 l/s

    Printed from Grundfos Product Centre [2019.03.001] 1/3


    Company name:
    Created by:
    Phone:

    Date: 30/07/2019
    Qty. Description
    Resulting head of the pump: 10.17 m
    Type of impeller: SEMI OPEN
    Maximum particle size: 12 mm

    Materials:
    Pump housing: Stainless steel
    DIN W.-Nr. 1.4301
    AISI 304
    Impeller: Stainless steel
    DIN W.-Nr. 1.4301
    AISI 304

    Installation:
    Pump outlet: Rp 1 1/2
    Maximum installation depth: 7m

    Electrical data:
    Type of motor: PSC
    Power input - P1: 1.3 kW
    Mains frequency: 50 Hz
    Rated voltage: 1 x 230 V
    Rated current: 5.9 A
    Cos phi - power factor: 0.99
    Rated speed: 2780 rpm
    Capacitor size - run: 16 µF/400 V
    Enclosure class (IEC 34-5): IP68
    Insulation class (IEC 85): F
    Length of cable: 10 m
    Type of cable plug: SCHUKO

    Others:
    Net weight: 13 kg
    Gross weight: 14 kg
    Danish VVS No.: 391313331
    Swedish RSK No.: 5885777
    Finnish LVI No.: 4822531
    Norwegian NRF no.: 9045611

    Printed from Grundfos Product Centre [2019.03.001] 2/3


    Company name:
    Created by:
    Phone:

    Date: 30/07/2019

    96010980 Unilift AP12.40.08.A1 50 Hz


    H Unilift AP12.40.08.A1, 50Hz eta
    [m] [%]
    Q = 3.04 l/s
    H = 10.17 m

    14

    12 60

    10 50

    8 40

    6 30

    4 20

    2 10

    Eta pump+motor = 32.2 %


    0 0
    0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Q [l/s]
    P1
    [W]

    1,200

    1,100

    1,000

    900

    800

    700

    600

    500

    400

    300

    200

    100
    P1 = 938 W
    0

    Printed from Grundfos Product Centre [2019.03.001] 3/3

    You might also like