Scribd
Upload
182 views

Hacking

Uploaded by

Ritik Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
182 views

Hacking

Uploaded by

Ritik Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

If you want to Increase your Internet speed over a shared Internet network, then head over here.

You will find steps to use NetCut, a very popular and free cracking software used to cut Internet
connection of users by ARP spoofing hack.

It’s quite easy to crack if you follow our steps carefully. This trick will work with most of the
wifi devices that have old hardware( modems and routers). For general knowledge, there are two
types of wifi keys WEP and WPA. Both are explained below:

1: WEP: Wired Equivalent Privacy (WEP) is one of the widely used security key in wifi
devices. It is also the oldest and most popular key and was added in 1999. WEP uses 128 bit and
256-bit encryption. With the help of this tutorial, you can easily get into 128-bit encryption and
Hack WiFi password using CMD.

2: WAP and WAP2: Wi-Fi Protected Access is an another version of WiFi encryption and was
first used in 2003. It uses the 256-bit encryption model and is tough to hack. WAP2 is an updated
version of WAP and was introduced in 2006. Since then it has replaced WAP and is now been
used mostly in offices and colleges worldwide.

Below are some steps to hack wifi password using cmd. Follow them carefully and you might get
one of your neighbors passwords.

HACK WIFI PASSWORD USING CMD

Hacking a Wi-Fi device is not always easy. You have to be careful of so many steps. Otherwise,
you might even get caught. For easy and secure hacking, one should use the command prompt
(cmd). Cmd is one of the most used features of Windows that gives you access to almost
everything on a system. If used properly, you can even get inside other remote systems. To know
more about cmd hacking check out our articles here.

Steps to Hack Wifi password using cmd:

1: Open command prompt by going to start and click on run command or enter windows+r, then
type cmd and hit Enter

2: In command prompt window, type

netsh wlan show network mode=bssid


hack wifi password using cmd

3: This command will show all the available WiFi network in your area

4: This is the last step. Just type:

netsh wlan connect name=(wifi name )

netsh wlan connect name=Mynet Sata1

and you will be connected to that WiFi network.

5: To disconnect it, type


netsh wlan disconnect

There are many other methods for exploiting a wifi to get its password. You can
check them here. Also, note that these tutorials are for educational purpose only.
To download WiFi hacking softwares, head to the download section

Get a WIFI Password from CMD in just two steps


Posted on February 7, 2015 by CHETAN SONI

Today I came past a neat little trick, that how you get the WIFI password through CMD i.e.
Command Prompt. Computer companies/School-College Networks always disable the Network
& Sharing center so that you can’t look into the properties of a connection and get the password
from the properties. But I have a solution to that.

Let’s get onto it.

So, first start CMD. Most of the time CMD is built-in on the computer. If it isn’t, then you can
open the CMD with the help of notepad by just typing this command.

Step 1: Open up Notepad

Step 2: Type Command.com in the file.

Step 3: Click Save As..

Step 4: Select All files and save the file as CMD.BAT.

!Don’t forget to save it as .bat or it won’t work!


Opened up CMD? Good. Now let’s go and try to get the password.

Step 1: Check what connection the computer is connected to and keep it in mind or write it
down. You’ll need it.

Step 2: Now type netsh wlan show profiles in your CMD window to show a list of connections
the computer has ever connected to.

Obviously the connection of the computer is in that list. So Here’s Mine is “Chetansoni” which
is generally known as BSSID in unix/linux.

Step 3: Now type the command netsh wlan show profiles [network name] key=clear. It will
show all the information about the network and the network key.
As you see, there’s a whole list of information about the network from where you are connected.
In the section [Security Settings] there is a line called Key Content. Behind Key Content is the
key to WiFi connection, which in my case is ********(lol).

Troubleshooting and known problems.

1) Wlansvc service: Sometimes, users don’t have the wlansvc started. When you do not have
the service started, it will show as The Wireless AutoConfig service is not running. You can fix
this by giving the command net start wlansvc. This will start the service.

2) CMD on non admin accounts: If the current profile you’re using is not administrator, the
command will not work. You’ll have to start an elevated version of the Command Prompt in
order for it to work.
And after all, make sure your spelling is right and That you include the key=clear. Too many
people have been asking why it won’t work while they did not add the last part of the command.
If you do not include it, the key will be shown as present.

Posted in h4ck0Tagged command prompt wifi, get password through cmd, hack wifi, hack wifi through
cmd, wifi hacking, Wifi Password

You might also like