Walvoil

SDE030
SDE060
Directional control valves with direct acting solenoid
SDE030-SDE060
General informations_____________________________________________________________________________________
Simple, compact and heavy duty designed sectional valves from 1 to 10 sections.
SDE030
Aluminium alloy inlet sections, available in several configurations.
Cast iron working sections
Different types of spools.
Optional check valves on workports.
Available for parallel circuit.
On/off solenoid controls.
Emergency handlever available.
SDE060
Steel inlet sections, available in several configurations.
Cast iron working sections
Different types of spools.
Different options to be flanged on the workports side
Available for parallel and series circuits.
On/off solenoid controls.
Emergency handlever available.
Additional information
This catalogue shows the product in the most standard configurations.
Please contact Sales Dpt. for more detailed information or special request.
WARNING!
All specifications of this catalogue refer to the standard product at this date.
Walvoil, oriented to a continuous improvement, reserves the right to
discontinue, modify or revise the specifications, without notice.
WALVOIL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY AN

4th edition March 2017
INCORRECT USE OF THE PRODUCT.
2 D1WWEB04E
SDE030-SDE060
_________________________________________________________________________________________________________
Index
Content
Working conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Standard threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Accessories
Coils and connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Fixing brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Installation and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
SDE030
Dimensions and hydraulic circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Complete sections ordering codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
- Inlet section
Part ordering codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Dimensions and hydraulic circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
- Working section
Part ordering codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Spools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Control kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Lower port relief valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Side port relief valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Check valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Solenoid operated check valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
- Outlet section
SDE060
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Hydraulic circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Complete sections ordering codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
- Inlet section
Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
- Working section
Lower port relief valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Spools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Control kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
- Flangeable valve blocks
Antishock valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Check valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Solenoid operated check valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Counterbalance valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
- Outlet section
D1WWEB04E 3
SDE030-SDE060
Working conditions ______________________________________________________________________________________
This catalogue shows technical specifications and diagrams measured with mineral oil of 46mm2/s - 46 cSt viscosity at 40°C -
104°F temperature.
SDE030 SDE060
30 l/min - 60 l/min
Nominal flow rating 30 l/min - 7.9 US gpm
7.9 US gpm - 15.8 US gpm
Operating pressure (max.) 250 bar - 3600 psi 315 bar - 4600 psi
outlet port T 210 bar - 3050 psi

Back pressure (max.)
outlet port T, with lever control 30 bar - 435 psi
∆p = 100 bar - 1450 psi fluid and valve
Internal leakage (max.) A(B)⇒T 14 cm3/min - 0.85 in3/min
at 40°C - 104°F
Fluid Mineral based oil
with NBR (BUNA-N) seals from -20°C to 80°C - from -4°F to 176°F
Fluid temperature
with FPM (VITON) seals from -20°C to 100°C - from -4°F to 212°F
operating range from 15 to 75 mm2/s - from 15 to 75 cSt
Viscosity min. 12 mm2s - 12 cSt
max. 400 mm2s - 400 cSt
Max. contamination level -/19/16 - ISO 4406 - NAS 1638 - class 10

Ambient temperature for
from -20°C to 50°C - from -4°F to 122°F
working conditions
NOTE - For different conditions please contact Sales Dpt.
Standard threads _________________________________________________________________________________________
REFERENCE STANDARD
BSP UN-UNF
ISO 228/1 ISO 263

THREAD ACCORDING TO
BS 2779 ANSI B1.1 unified
ISO 1179 11926

CAVITY DIMENSION
SAE J11926
ACCORDING TO
DIN 3852-2 shape X or Y
PORT SDE030 SDE060

THREADING 30 l/min (7.9 US gpm) sections 60 l/min (15.8 US gpm) sections
BSP UN-UNF BSP UN-UNF BSP UN-UNF
Inlet P and outlet T G 3/8 3/4-16 (SAE 8) G 3/8 3/4-16 (SAE 8) G 1/2 3/4-16 (SAE 8)
Working ports G 3/8 9/16-18 (SAE 6)

G 3/8 9/16-18 (SAE 6) G 3/8 9/16-18 (SAE 6)
A and B G 1/2* 3/4-16 (SAE 8)*
7/16-20 (SAE 4) 7/16-20 (SAE 4)
Port M G 1/4 9/16-18 (SAE 6) G 1/4 G 1/4
9/16-18 (SAE 6)** 9/16-18 (SAE 6)**
Port LS G 1/4 9/16-18 (SAE 6) G 1/4 9/16-18 (SAE 6) / /
NOTE (*) Optional thread - (**) Only for type N inlet section
4 D1WWEB04E
SDE030 - SDE060 SDE030
_________________________________________________________________________________________________
Dimensions
This drawing is referred to directional valve with 2 working sections and AN1 type inlet section.
F 70
2.76
E 35
1.38
20.6 15
0.81 0.59
75.2
2.96
15.5
0.61
M8
220.5
36.5
31.5
2.76
1.24
8.68
1.35
70
34
0.049
1.25
0.177
4.5
15A2..........
10 35.5 38.5 37 34 product code
Ref.............
0.39 1.40 1.52 1.46 1.34 SDE030/2 customer reference
PA1501568/004 product name
production allotment
A B A B
M
Description example:
SDE030/2/AN1(JNG3-120)ELN/Q-18ES3B/Q-18ES3B/RF-12VDC
AN type inlet section AN1 type inlet section (see drawing) AN2-AN6-AN7 type inlet sections
TYPE E F E F Weight E F
mm in mm in mm in mm in Kg lb mm in mm in
SDE030/1 71 2.80 116 4.57 108 4.25 153 6.02 3.80 8.38 108 4.25 153 6.02
SDE030/2 108 4.25 153 6.02 145 5.71 190 7.48 5.99 13.21 145 5.71 190 7.48
SDE030/3 145 5.71 190 7.48 182 7.17 227 8.94 8.10 17.86 182 7.17 227 8.94
SDE030/4 182 7.17 227 8.94 279 10.98 264 10.39 10.22 22.53 279 8.62 264 10.39
SDE030/5 219 8.62 264 10.39 256 10.08 301 11.85 12.33 27.18 256 10.08 301 11.85
SDE030/6 256 10.08 301 11.85 293 11.54 338 13.31 14.44 31.83 293 11.54 338 13.31
SDE030/7 293 11.54 338 13.31 330 12.99 375 14.76 16.56 36.51 330 12.99 375 14.76
SDE030/8 330 12.99 375 14.76 367 14.45 412 16.22 18.67 41.16 367 14.45 412 16.22
SDE030/9 367 14.45 412 16.22 404 15.91 449 17.68 20.78 45.81 404 15.91 449 17.68
SDE030/10 404 15.91 449 17.68 441 17.36 486 19.13 22.89 50.46 441 17.36 486 19.13
D1WWEB04E 5
SDE030 SDE030 - SDE060
Complete section ordering codes_____________________________________________________________________
SDE030/4/ AN1(JNG3-120)ELN / Q-18ES3B / Q-18ES3B / QL-18ES3B /
Nr. of working sections 1 2 2 2
QBPE-18ES3B.BPEN(NC)3 / RF - ...... - 12VDC
2 3 4 5
5
7
5
2
5
7
6
6 D1WWEB04E
_____________________________________________________________________
Complete section ordering codes
1 Complete inlet section * page 10 3 Complete outlet section* page 25

Section bodies are aluminium alloy made Section bodies are aluminium alloy made
TYPE: AN CODE: 6192G0000 TYPE CODE DESCRIPTION
DESCRIPTION: Without valves arrangement, P and T ports open RF 3FIA203000 Without ports
TYPE: ANP CODE: 6192G0001 RS 6193A1200 P and T ports plugged
DESCRIPTION: As AN, port P open and T plugged RP 6193A3100 P port open and T port plugged
TYPE: ANT CODE: 6192G0002 RT 6193A3000 T port open and P port plugged
DESCRIPTION: As AN, port P plugged and T open
TYPE: ANS CODE: 6192G0003 4 Valve threading
DESCRIPTION: As AN, ports P and T plugged
TYPE: AN1(JNG3-120)ELN-WC CODE: Y61S3A3001 Specify threading always when it is different from BSP standard (see
DESCRIPTION: Relief and unloader valves arrangement, P and T page 4).
ports open
TYPE: AN1P(JNG3-120)ELN-WC CODE: Y61S3A3002 5 Coils page 56
DESCRIPTION: As AN1, port P open and T plugged Coils voltage specification; for list of available coils see pages of
TYPE: AN2/PPXN1(JNG3-120)ELN-WC CODE: Y61S3A3001 related sections
DESCRIPTION: Relief, unloader and flow control valves arrangement,
P and T ports open
6 Fixing bracket page 59
TYPE: AN2P/PPXN1(JNG3-120)ELN-WC CODE: Y61S3A3005
DESCRIPTION: As AN2, port P open and T plugged TYPE CODE DESCRIPTION
TYPE: AN6/EEXL1(VMP02TR-220)-SB10RC(C3)-WC STAF 5STA148065 Brackets with fixing screws
CODE: Y61S3A3006
DESCRIPTION: With pressure relief valve and flow control valve, for 7 Assembling kit
Open Center circuit, compensator with 10 bar (145 psi) stand-by, P
CODE DESCRIPTION CODE DESCRIPTION
and T ports open
Per distributore con fiancata d’ingresso tipo AN
TYPE: AN7/EEXN1(VMP02TR-200)-SB10RCV(C3)-WC
5TIR108116 For 1 section valve 5TIR108305 For 6 sections valve
CODE: Y61S3A3007
5TIR108154 For 2 sections valve 5TIR108341 For 7 sections valve
DESCRIPTION: As previous one, compensator with stand-by from 0
to 10 bar (0 to 145 psi) and handwheel actuation for Open to Closed
Center switching, P and T ports open.
Per distributore con fiancate d’ingresso tipo AN1-AN2-AN6-AN7
2 Complete working section * page 16 5TIR108154 For 1 section valve 5TIR108341 For 6 sections valve
Section bodies are cast iron made 5TIR108194 For 2 sections valve 5TIR108377 For 7 sections valve
TYPE: Q-18ES3B-WC CODE: Y63S3A3001 5TIR108227 For 3 sections valve 5TIR108412 For 8 sections valve
DESCRIPTION: Parallel circuit, type 1 double acting spool 5TIR108264 For 4 sections valve 5TIR108449 For 9 sections valve
TYPE: Q-28ES3B-WC CODE: Y63S3A3006 5TIR108305 For 5 sections valve 5TIR108486 For 10 sections valve
DESCRIPTION: Parallel circuit, type 2 double acting spool
TYPE: QBP-18ES3B.BPC3-WC CODE: Y63S3A3002
DESCRIPTION: Parallel circuit, type 1 double acting spool, check
valves on workports
TYPE: QBPE-18ES3B.BPEN(NC)3-WC CODE: Y63S3A3005
DESCRIPTION: Parallel circuit, type 1 double acting spool, solenoid
operated check valves on workports
TYPE: PFL3(150)-18ES3B-WC CODE: Y63S3A3011
DESCRIPTION: Parallel circuit, type 1 double acting spool and side
relief valve with 150 bar (2175 psi)
TYPE: QL-18ES3B-WC CODE: Y63S3A3004
DESCRIPTION: Parallel circuit, side workports, type 1 double acting
spool
TYPE: QBPL-18ES3B.BPA3-WC CODE: Y63S3A3003
DESCRIPTION: As previous one with check valves on workports
NOTE (*) – Codes are referred to BSP thread.
D1WWEB04E 7
Inlet section: part ordering codes____________________________________________________________________
Valve setting (bar) Without coil
SDE030/AN-.... SDE030/AN1(JNG3-120)ELN-WC-....
1 6 1 2 3 6
2 1
7
Valve setting (bar) Without coil Valve setting (bar)
SDE030/AN2/PPXN1(JNG3-120)ELN-WC-.... SDE030/AN6/EEXN1(VMP02TS-200)
1 4 2 3 6 1 4 2
SB10RCV(C3)-WC-....
7 5 Without 6
2 coil
4 3
7
5
7
2
4
8 D1WWEB04E
___________________________________________________________________
Inlet section: part ordering codes
1 Inlet section body kit * page 10 3 Solenoid operated unloading valve page 14
Section bodies are aluminium alloy made TYPE CODE DESCRIPTION
TYPE CODE DESCRIPTION For sections AN1-AN2 type
AN 5FIA109303 Without valves arrangement, P and T ports ELN 0EC08002031 Without emergency actuation
open ELV 0EC08002034 With screw type emergency actuation
ANP 5FIA109303PT As AN, port P open and T plugged ELP 0EC08002033 With push-button emergency actuation
ANT 5FIA109303PT As AN, port P plugged and T open ELT 0EC08002035 With “twist & push” emergency actuation
ANS 5FIA109303S As AN, ports P and T plugged LT XTAP510320 Unloading valve blanking plug
AN1 5FIA109300 Relief and unloader valves arrangement, P
and T ports open 4 Flow control valve page 14
AN1P 5FIA109300P As AN1, port P open and T plugged
AN2 5FIA109302 Relief, unloader and flow control valves TYPE CODE DESCRIPTION
arrangement, P and T open ports For sections AN1-AN2 type
AN2P 5FIA109302P As AN2, port P open and T plugged PPAL1 0PP10002000 Hand-wheel setting type
AN6 5FIA109301 For Open Center, relief and flow control valves PPAV1 0PP10002005 Screw setting type
arrangement, compensator, LS port plugged, PPXN1 0PP10002031 Solenoid operated, without emergency
P and T ports open PPXV1 0PP10002033 Solenoid operated, screw emergency
AN7 5FIA109304 As AN6, for Closed Center, with LS port open PPXL1 0PP10002035 Solenoid operated, hand-wheel
emergency
LT 3XTP3545700 Flow control valve blanking plug
2 Main relief valve page 18 For sections AN6-AN7 type
TYPE CODE DESCRIPTION EEXN1 0EE10002009 Solenoid operated, without emergency
For sections AN1-AN2 type EEXL1 0EE10002008 Solenoid operated, hand-wheel
Valve standard setting is referred to 10 l/min (2.6 US gpm) flow, emergency
considering the valve mounted on inlet section.
(JNG2-63) 5KIT105512 Range 40-63 bar (580-900 psi) 5 Compensator kit page 15
std setting 63 bar (900 psi)
(JNG3-120) 5KIT105513 Range 50-200 bar (725-2900 psi) TYPE CODE DESCRIPTION
std setting 120 bar (1750 psi) For section AN6 type
(JNG4-220) 5KIT105514 Range 160-315 bar (2300-4600 psi) SB10RCV(C3) 5KT6200227 With 10 bar (145 psi) stand-by, hand-
std setting 220 bar (3200 psi) wheel actuation for Open Center to
(JNH2-63) 5KIT105517 As type JNG2, set and locked Closed Center switching
(JNH3-120) 5KIT105516 As type JNG3, set and locked SB10RC(C3) 5KT6200222 With 10 bar (145 psi) stand-by,
(JNH4-220) 5KIT105515 As type JNG4, set and locked for Open Center circuit
(JNZT2-63) 5KIT105562 As type JNG2, anti-tampering type For section AN7 type
(JNZT3-120) 5KIT105563 As type JNG3, anti-tampering type CL X451810000 Compensator blanking plug, for
(JNZT4-220) 5KIT105564 As type JNG4, anti-tampering type Closed Center circuit
SV XTAP623282 Relief valve blanking plug
For sections AN6-AN7 type 6 Section threading
Valve standard setting is referred to 1 l/min (0.26 US gpm) flow, Specify threading always when it is different from BSP standard (see
considering the valve mounted on inlet section. page 4).
(VMP02TV-50) 1100000100 Range 5-80 bar (73-1160 psi)
(VMP02TS-150) 1100000101 Range 50-220 bar (725-3200 psi)
7 Optional coil pag. 56
std setting 150 bar (2200 psi) For list of available coils see pages of related section.
(VMP02TR-250) 1100000102 Range 180-350 bar (2600-5100 psi)
D1WWEB04E 9
Inlet section: dimension and hydraulic circuit____________________________________________________
AN inlet sections
AN type AN type ANP type ANT type ANS type

with P and T ports open P and T ports open P port open and P port plugged P and T ports
T port plugged and T port open plugged
0.39
10
18 34
0.71 1.34
M8 - nr.2 holes
M M M M
depth 10 - 0.39
X
M
2.76
70
P P P P
36.5
1.44
T T T
70 T
2.76
T P
28.5
1.12
1.30
33
14 Wrenches and tightening torque

14.25
41
0.56
0.55 1.61 X = allen wrench 6 - 24 Nm (17.7 lbft)
AN1 inlet sections
AN1 type with P and T ports open AN1 types

P and T ports open
34 18 34 M8 - nr.2 holes
0.39
M
10
1.34 0.71 1.35 depth 10 - 0.39
P
2
2.09
1
53
T
2.76
70
47.5
1.87
38.5
1.52
70 66.7
AN1P types
2.76 2.63 P port open and T port plugged
182.2
7.17 M
T P
65.5
2.58
P
1.85
45.5
1.79
47
0.98
0.98
25
25
15.5 39
0.61 1.54
T
Wrenches and tightening torque Legenda
X = allen wrench 6 - 24 Nm (17.7 lbft) 1: Pressure relief valve
NOTE: for valve wrench and torque see 2: Solenoid operated unloading valve
pages 13 and 14.
10 D1WWEB04E
___________________________________________________
Inlet section: dimension and hydraulic circuit
AN2 inlet sections
AN2 type with P and T ports open AN2 types

P and T ports open
16.5 34 10
0.65 1.34 0.39
M
M8 - nr.2 holes
X depth 10 - 0.39
56
2.20
1 2 T
3 M
3.94
100
3.23
2.99
82
76
43.5
1.71
X
39.5
1.56
AN2P types
P port open and T port plugged
70 96
2.76 3.78
232.7
M
9.16
T P
65.5
2.58
2.76
70
2.05
52
39.5
1.56
22.5
0.89
20.5
0.81
17.5
0.69
T
18.5 37.5
0.73 1.48
Legenda
1: Pressure relief valve
2: Solenoid operated unloading valve
3: Pressure compensated flow control valve
Wrenches and tightening torque

X = allen wrench 6 - 24 Nm (17.7 lbft)
NOTE: for valve wrench and torque see pages
13, 14.
D1WWEB04E 11
AN6-AN7 inlet sections
AN6 type; configuration for Open and Closed Center

80
3.15
18 34
0.71 1.35
Legenda
0.39
2: Flow control valve
10
65.5
2.58
3: Excludable compensator
M8 - nr.2 holes
depth 10 - 0.39 X
3
23
0.91 X
199 max
7.83 max
LS
T 1
2
0.39
110
P
91.5
M
0.36
2.76
2.68
70
68
1.42
1.34
31.5
1.24
36
34
23.5 19 42.5
0.93 0.75 X X X
1.67
172
6.77
58.5 21.5
2.30 0.85
X
16.5
0.65
NOTE: for valve wrench and torque see

pages 13 and 15.
23.5
23.5
0.93
0.93
0.18
4.5
AN6 type AN6 type AN7 type

for Open Center circuit for Closed and Open Center circuits for Closed Center circuit
M M M
P P P
LS LS LS
T T
T
12 D1WWEB04E
____________________________________________________________________________________
Inlet section: options
Main relief valve
For sections AN1 and AN2 type
Setting types Setting range: JNG2 type Setting range: JNG3 type
0 1 2 3 4 5 6 7 (US gpm) 0 1 2 3 4 5 6 7 (US gpm)
JG 400 400
(psi) (psi)
Y Z (bar) (bar)
5000
5000
300 300
X Pressure 4000 4000
Pressure
max. setting
45.5 3000 200 3000
200
1.79 std. setting
2000 2000
JH 100 100
max. setting 1000
1000
min. setting
min. setting
0 0 0 0
0 5 10 15 20 25 30 0 5 10 15 20 25 30
59.5
Flow (l/min) Flow (l/min)
2.34
JZT
Setting range: JNG4 type
0 1 2 3 4 5 6 7 (US gpm)
59
Legenda 400 (psi)
(bar)
2.32 JG: screw setting type 5000
max. setting
JH: valve set and locked 300
std. setting 4000
(cap code 3COP117260)
Pressure
JZT: valve set and locked 200 3000
min. setting
2000
100
Wrenches and tightening torque 1000
X = allen wrench 4
0 0
Y = wrench 13 - 24 Nm (17.7 lbft)
0 5 10 15 20 25 30
Z = wrench 19 - 24 Nm (17.7 lbft) (l/min)
Flow
Setting range: VMP02TV type Setting range: VMP02TS type

36 0 1 2 3 4 5 6 7 (US gpm) 0 1 2 3 4 5 6 7 (US gpm)
1.42 400 400
(psi) (psi)
(bar) (bar)
5000 5000
Z
300 300
Y 4000 4000
Pressure
Pressure
max. setting
200 3000 200 3000
X
2000 std. setting 2000
max. setting
100 100
1000 min. setting 1000
std. setting min. setting
0 0 0 0
0 5 10 15 20 25 30 0 5 10 15 20 25 30
Setting range: VMP02TR type

X = wrench 10 0 1 2 3 4 5 6 7 (US gpm)
400
Y = wrench 10 - 6.6 Nm (4.9 lbft) (bar) max. setting (psi)
5000
Z = wrench 19 - 24 Nm (17.7 lbft)
300
std. setting 4000
Pressure
min. setting
200 3000
2000
100
1000
0 0
0 5 10 15 20 25 30
Flow (l/min)
D1WWEB04E 13
Inlet section: options____________________________________________________________________________________
Unloading valve
Manual emergency actuation types Pressure drop diagram

0 1.5 3 4.5 6 7.5 (US gpm)
X
Y 10
(psi)
ELN 2 Legenda (bar)
120
ELN: without amergency actuation 8
ELP: push-button type emergency actuation
90
Pressure
1 6
ELV: screw type emergency actuation
66,5 ELT: “push&twist” type emergency actuation 60
4
ELP ELV ELT 2 30
0 0
88 88 91 0 5 10 15 20 25 30
Flow (l/min)
2 2 2
Features
1 1 1 Max. flow. . . . . . . . . . . . . . . . : 40 l/min (10.6 US gpm)
Max. pressure. . . . . . . . . . . . . : 380 bar (5500 psi)
Wrenches and tightening torque Internal leakage. . . . . . . . . . . : 0.25 cm3/min @ 210 bar
X = wrench 24 - 30 Nm (22 lbft) (0.015 in3/min @ 3050 psi)
Y = 5 Nm (3.7 lbft) For coil features and options see BER coil on pages 56 and 57.
Pressure compensated flow control valve
For section AN2 type
Manual operated Solenoid operated

Flow regulation diagram
40
PPAV1 (l/min) 10
X 2 3 PPXN1 (US gpm)
2 3 K
30 8
6
K 1
Flow
1 20
41.5
96 4
1.63
3.78
PPAL1 10
W Z Y X 2
2 3
2 3 PPXV1
X 0
0
0 20 40 60 80 100 (%)
1 Valve operation
1
45 110 (A@12VDC)
1.77 4.33 0 0.25 0.50 0.75 1.00 1.25
2 3 PPXL1 0.63
0 0.10 0.20 0.30 0.40 0.50 0.60 (A@24VDC)
Coil current
1
143.5
5.65
Flow vs. Pressure diagram
Legenda Wrenches and tightening torque
0 800 1600 2400 3200 4000 (psi)
PPAV1: screw setting type K = wrench 10 - 6.6 Nm (4.9 lbft)
40
PPAL1: hand-wheel setting type X = wrench 27 - 50 Nm (37 lbft) (l/min) on P2 line 10
on P3 line (US gpm)
PPXN1: without emergency actuation Y = 5 Nm (3.7 lbft)
30 8
PPXV1: screw type emergency actuation W = allen wrench 4
PPXL1: hand-wheel emergency actuation Z = wrench 8 - 15 Nm (11 lbft) 6
Flow
20
Features
4
Max. inlet flow . . . . . . . . . . : 50 l/min (13.2 US gpm)
10
Max. regulated flow. . . . . . . : 30 l/min (7.9 US gpm) 2
Inlet flow (PPX types) . . . . . : regulated flow +5%
Max. pressure. . . . . . . . . . . : 350 bar (5100 psi) - PPA types / 315 bar (4600 psi) - PPX types 0 0
Internal leakage (PPX types). : 150 cm3/min @ 210 bar (9.1 in3/min @ 3050 psi) 0 50 100 150 200 250 300 (bar)
For coil features and options see BQP19 or BH coils on pages 56 and 57. Pressure
14 D1WWEB04E
____________________________________________________________________________________
For sections AN6-AN7 type

Curves are measured using the standard compensator mounted on section, with 10 bar (145 psi) stand-by.
Flow regulation diagram Flow vs. Pressure diagram

0 500 1000 1500 2000 2500 (psi)
50 40
(l/min) 12 10
(l/min)
(US gpm)
EEXN1 40
(US gpm)
10 30 8
30 8
6
Flow
Flow
6 20
20
4
4
10
92 10 2
2
3.62 2
0 0 0 0
0 20 40 60 80 100 (%) 0 40 80 120 160 200 (bar)
Valve operation Pressure
1
Z Z Y X 0 0.25 0.50 0.75 1.00 1.25 (A@12VDC)
EEXL1
0.63
0 0.10 0.20 0.30 0.40 0.50 0.60 (A@24VDC)
Coil current
121.5
4.78 2
1 Features
Max. flow. . . . . . . . . . . . . . . . : 40 l/min (10.6 US gpm)
Legenda Max. pressure. . . . . . . . . . . . . : 300 bar (5500 psi)
EEXN1: without emergency actuation Internal leakages . . . . . . . . . . : 150 cm3/min @ 150 bar
EEXL1: hand-wheel emergency actuation (9.1 in3/min @ 2175 psi)
For coil features and options see BQP19 or BH coils on pages 56 and 57.
K = wrench 10 - 6.6 Nm (4.9 lbft)
X = wrench 27 - 50 Nm (37 lbft)
Y = 5 Nm (3.7 lbft)
Z = wrench 13 - 9.8 Nm (7.2 lbft)
Compensator kit
For sections AN6-AN7 type
SB10RCV(C3)
Y Legenda
3.50 max
89 max
SB10RC(C3) CL SB10RC(C3): compensator with 10 bar (145 psi) stand-by, for Open
X
X X Center circuit
CL: compensator blanking plug, for Closed Center circuit
27.2
1.07
19.5
0.77
SB10RCV(C3): compensator with 10 bar (145 psi) stand-by, hand-

wheel actuation for Open Center to Closed Center circuit switching

Y = wrench 13 - 6.6 Nm (4.9 lbft)
D1WWEB04E 15
Working section: part ordering codes_______________________________________________________________

Valve setting (bar)
SDE030/P - 1 8ES3B.P3(G3-100) - WC - ......

3
1 2 3 3 without 7
coil 1
3
3
8
4
valve on port A - 1
valve on port B - 2
valve on ports A and B - 3
SDE030/QBPL - 1 8ES3B.BPA 3 - WC - ......
1 2 3 6 without 7
coil 3 6 6
8 3
1
2
valve on port A - 1
valve on port B - 2
valve on ports A and B - 3
SDE030/QBPE - 1 8ES3B.QBPEN3(NC) - WC - ......
1 2 3 6 without 7
coil
6
6 6
3
8
6
1
2
16 D1WWEB04E
_______________________________________________________________
Working section: part ordering codes
Valve setting (bar)
SDE030/PFL 3(150) - 1 8ES3B - WC - ......

6
1 5 2 3 without
coil
7
1 - valve on port A
2 - valve on port B
3 - valve on ports A and B
3 6
8
1 2
1 Working section body kit * page 18 5 Side port relief valve page 22
Section bodies are cast iron made The codes are referred to parts with FPM o-ring seals
TYPE CODE DESCRIPTION TYPE CODE DESCRIPTION
Working sections with upper ports PT 5TAP324460 Valve blanking plug
Q 5EL1093000 Parallel type Fixed setting antishock valves:
P 5EL1093005 As type Q, lower port relief valve arrangement setting is referred to 10 l/min (2.6 US gpm)
QBP 5EL1093003 As type Q with check valve arrangement TYPE: P 100 CODE: 5KIT308 100 A
QBPE 5EL1093004 As type Q with solenoid operated setting (bar) setting (bar)
check valve arrangement SETTING:
PFL 5EL1093006 As type Q, side port relief valve arrangement 40 bar (580 psi) 50 bar (725 psi) 60 bar (870 psi)
Working sections with side ports 80 bar (1150 psi) 100 bar (1450 psi) 120 bar (1750 psi)
QL 5EL1093002 Parallel type, 130 bar (1900 psi) 140 bar (2050 psi) 150 bar (2150 psi)
QBPL 5EL1093001 As type QL with check valve arrangement 165 bar (2400 psi) 175 bar (2550 psi) 185 bar (2700 psi)
200 bar (2900 psi) 210 bar (3050 psi) 220 bar (3200 psi)
2 Spool page 20 235 bar (3400 psi) 250 bar (3600 psi)
TYPE CODE DESCRIPTION

6 Check valve page 23
For ON/OFF solenoid control
1 3CU9010102 Double acting, A and B closed in neutral pos. TYPE CODE DESCRIPTION
1A 3CU9010103 Double acting, A to tank in neutral pos. For For arranged setions with upper ports, QBP type
connect B to tank (type 1B) is necessary to BPC3 5KIT430030 Valves kit for A and B ports
turn the spool BPC1-BPC2 5KIT430012 Valve kit por single port
2 3CU9025100 Double acting, A and B to tank in neutral pos. For arranged setions with upper ports, QBPE type
2H 3CU9025225 Double acting, A and B partially to tank in TBP 3XTAP822150 Valve blanking plug
neutral position Normally closed circuit (NC)
For ON/OFF solenoid control with emergency lever operation BPEN(NC) 0EC08002032 Without manual emergency
1LHD 3CU9010300 As type 1 BPEV(NC) 0EC08002037 With screw type emergency
1ALHD 3CU9010303 As type 1A BPEP(NC) 0EC08002036 With pull-button emergency
2LHD 3CU9020300 As type 2 BPET(NC) 0EC08002038 With “pull & twist” emergency
2HLHD 3CU9020310 As type 2H Normally open circuit (NO)
BPEN(NA) 0EC08002031 Without manual emergency
3 On/off solenoid control page 21 BPEV(NA) 0EC08002034 With screw type emergency
BPEP(NA) 0EC08002033 With push-button emergency
BPET(NA) 0EC08002035 With “push & twist” emergency
8ES1B 5CAN08E114C Single acting on port A
For arranged setions with side ports, QBPL type
8ES2B 5CAN08E114C Single acting on port B
BP3A 5KIT430130 Valves kit for A and B ports
8ES3B 5CAN08E115C Double acting
BPA1-BPA2 5KIT430112 Valve kit for single port
8ES3BLHD 5CAN08E315 Double acting with emergency lever
operation: needs dedicated spools
7 Section threading
4 Lower port relief valves page 22 Specify threading always when it is different from BSP standard (see
Standard setting is referred to 10 l/min (2.6 US gpm) flow. page 4).
P(G3-100) 5KIT060000 From 50 to 200 bar (725 to 2900 psi), 8 Optional coils page 56
standard setting 100 bar (1450 psi) For list of available coils see pages of related section.
P(G4-200) 5KIT060001 From 200 to 315 bar (2900 to 4600 psi),
standard setting 200 bar (2900 psi)
P3T 5KIT060100 A and B ports valve blanking plugs NOTE (*) – Codes are referred to BSP thread.
D1WWEB04E 17
Working section___________________________________________________________________________________________
Dimension and hydraulic circuit
Working section Q type with upper ports
Q type P type
with lower port relief valves arrangement
0.59
15
2.44
62
1.46
37
18.5
0.73
1.06
Valve fixing 27 24.5 19
0.43
0.96 0.75
11
plan 68.2
0.31
2.69
8
A B
2.44
62
1.46
37
18.5
0.73
1.06
27
18.4 31.5
0.72 1.24
0.31
8
68.2
2.69
Flow through pressure drop Q type example P type example

0 1 2 3 4 5 6 7 (US gpm) (with spool 1) (with spool 1)
1.5 A B A B
(bar) 20
(psi)
1.2
15
Pressure
0.9
10
0.6
5
0.3
0 0
0 5 10 15 20 25 30 (l/min)
Flow
PFL type
with side port relief valves arrangement
PFL type example

(with spool 1)
A B
103.5
4.07
82.5
3.25
1.06
27
14.4 68.2
0.31
8
0.57 2.69 Valve fixing plan
A B
37
18.5
0.73
17.5 62
0.69 2.44
97
3.82
18 D1WWEB04E
__________________________________________________________________________________________
Working section
Spools
Working section with upper ports
QBP - QBPE types

with check valve arrangement
QBP type example
(with spool 1)
A B
103.5
4.07
82.5
3.25
1.06
27
14.4 68.2
0.31
0.57 2.69
8
Valve fixing plan
A B
1.46
37
18.5
0.73
17.5 62
0.69 2.44
97
3.82
Working section with side ports
QL - QBPL types
with or without check valves arrangement
QBPL type example
A B (with spool 1)
A
A B
92.5
3.64
82.5
3.25
1.06
27
68.2
0.31
2.69
8
Valve fixing plan

1.46
37
18.5
0.73
D1WWEB04E 19
Working section___________________________________________________________________________________________
Spool
Types 1-1LHD Types 1A-1ALHD Types 2-2LHD

Double acting, A and B closed Double acting, A to tank in Double acting, A and B to tank
in neutral position neutral position in neutral position
1 0 2 1 0 2 1 0 2
A B A B A B
P T P T P T
Stroke Stroke Stroke
position 1: + 3 mm (+ 0.12 in) position 1: + 3 mm (+ 0.12 in) position 1: + 3 mm (+ 0.12 in)
position 2: - 3 mm (- 0.12 in) position 2: - 3 mm (- 0.12 in) position 2: - 3 mm (- 0.12 in)
P⇒port - port⇒T pressure drops P⇒port - port⇒T pressure drops

(curves are matched) (curves are matched)
0 1 2 3 4 5 6 7 (US gpm) 0 1 2 3 4 5 6 7 (US gpm)
10 10
(bar) 20 (bar) 20
(psi) (psi)
8 8
15 15
Pressure
Pressure
6 6
10 10
4 4
2 5 2 5
0 0 0 0
0 5 10 15 20 25 30 (l/min) 0 5 10 15 20 25 30 (l/min)
Flow Flow
Types 2H-2HLHD
Double acting, A and B partially to
tank in neutral position
1 0 2
A B
P T
Stroke
position 1: + 3 mm (+ 0.12 in)
position 2: - 3 mm (- 0.12 in)
P⇒port - port⇒T pressure drops

(curves are matched)
0 1 2 3 4 5 6 7 (US gpm)
10
(bar) 20
(psi)
8
15
Pressure
10
4
2 5
0 0
0 5 10 15 20 25 30 (l/min)
Flow
20 D1WWEB04E
___________________________________________________________________________________________
Working section
On/off solenoid control: 8ES3B - 8ES1B - 8ES2B types

When the section is configurated with check valves, the coils on control must be rotated 180°.
8ES3B: double acting control kit 8ES1B: single acting on A control kit
1 0 2 1 0 2
Y X Y X
Z
76 76 76 6.4
2.99 2.99 2.99 0.25
220.2 150.6
8.67 5.93
Operating condition
(stroke 3 mm - 0.12 in) 8ES2B: single acting on B control kit
(bar) 0 1.5 3 4.5 6 7.5 (US gpm)
420 6000
(psi)
1 0 2
360 5000 Y X
300
4000 Z
Pressure
240 Wrenches and tightening

3000
180 torque
120
2000 X = wrench 17 - 24 Nm (17.7 lbft)
1000
Y = 6.6 Nm (4.9 lbft)
60
Z = wrench 24 - 24 Nm (17.7 lbft) 6.4 76
0 0 0.25 2.99
0 5 10 15 20 25 30 (l/min) For coil features and options see 150.6
Flow 5.93
D12C coil on pages 56 and 58.
On/off solenoid control with lever: 8ES3BLHD type

When the section is configured with side ports or with check valves, control and coils must be rotated 180°.
If the section is configured with solenoid check valves the control can’t be used.
The control needs dedicated spools: see page 17 for list.
IMPORTANT: lever to be used only for emergency operation, not for continuative use.
22°2
3’
2 22
20° 11°22’ °2
2 3’
1
0
11
1 2
°2
1
J
2’
34.5
1.36
3.66
93
0.98
25
1: idle stroke angles

2: total operation angles
76 137
2.99 5.39
281.2
11.07 J = wrench 4 - 9.8 Nm (7.2 lbft)
K K = allen wrench 4 - 6.6 Nm (4.9 lbft)
Y X
X = wrench 17 - 24 Nm (17.7 lbft)
0.59
15
Y = 6.6 Nm (4.9 lbft)

Control features
Max. back pressure on T . : 30 bar (435 psi)
M8 For coil features and options see D12C coil
on pages 56 and 8.
D1WWEB04E 21
Working section___________________________________________________________________________________________
Lower port relief valves
G type Setting range: G3 type

0 0.3 0.6 0.9 1.2 1.5 (US gpm)
400 (psi)
(bar)
5000
300
4000
Pressure
max. setting 3000
200
X
26.5
1.04
2000
Y
100
Z 1000
min. setting
0 0
H type 0 1 2 3 4 5 6 (l/min)
Flow
Setting range: G4 type

0 0.3 0.6 0.9 1.2 1.5 (US gpm)
400 (psi)
(bar)
5000
max. setting
300
4000
Pressure
200 3000
Legenda Wrenches and tightening torque
min. setting 2000
G: screw setting type X = wrench 17 - 24 Nm (17.7 lbft)
100
H: valve set and locked Y = wrench 8 - 6.6 Nm (4.9 lbft) 1000
Z = allen wrench 2.5
0 0
0 1 2 3 4 5 6 (l/min)
Flow
Side port relief valves
Pressure drop
(working section included
0 1.5 3.0 4.5 6 7.5 (US gpm)
X 10 (psi)
(bar)
125
7.5
100
Pressure
5 rt 75
po
P⇒ ⇒
T
rt 50
po
2.5
25
0 0
0 5 10 15 20 25 30 (l/min)
Flow
X = wrench 24 - 42 Nm (31 lbft) Setting example
(10 l/min - 2.6 US gpm)
0 1.5 3.0 4.5 6 7.5 (US gpm)
400
(psi)
(bar)
5000
300
250 bar (3600 psi) 4000
Pressione
200 bar (2900 psi) 3000

200
150 bar (2150 psi)
2000
100 bar (1450 psi)
100
40 bar (580 psi) 1000
0 0
0 5 10 15 20 25 30 (l/min)
Portata
22 D1WWEB04E
___________________________________________________________________________________________
Working section
Check valves
For sections with upper ports

A B
X BPC3 type BPC1 type BPC2 type
A B A B A B
82.5
3.25
14.5 68.2 27.4

0.57 2.69 1.08
123
4.84

Parts ordering codes

Pressure drop diagram
BP 1300020402 Check valve
(working section included)
TBP XTAP627260 Valve blanking plug
0 1.5 3 4.5 6 7.5 (US gpm)
- 3PIS214480 Piston 20
(psi)
(bar)
240
15
rt
po
Pressure
180
P⇒
10
120
⇒ T
5 port
60
0 0
0 5 10 15 20 25 30 (l/min)
Flow
For sections with side ports
A Pressure drop diagram BPA3 type

A B (working section included)
A B
Y 0 1.5 3 4.5 6 7.5 (US gpm)
20
(psi)
(bar)
82.5
3.25
240
15
Pressure
180
P⇒port
10
120
68.2 33.4
2.69 1.31 5 t⇒T
por 60
135
5.31
0 0
0 5 10 15 20 25 30 (l/min)
Flow
Parts ordering codes

BPA 3XCA0422800 Check valve
- 3PIS3180460 Piston
D1WWEB04E 23
Working section___________________________________________________________________________________________
Solenoid operated check valves

For sections wiht upper ports
BPE(NC) type: normally closed circuit BPEN3(NC) type BPEN1(NC) type BPEN2(NC) type
219.6
8.65 A B A B A B
A B
X
BPEN
Y 62.8
82.5
3.25
2.47
2
75.7 68.2 1
2.98 2.69
BPEV BPEP BPEG
77.3 90.8 83.6

3.04 3.57 3.29
2 2 2
1 1 1
BPEN3(NA) type BPEN1(NA) type BPEN2(NA) type
BPE(NA) type: normally open circuit A B A B A B
225
A 8.86 B
X
BPEN
Y 65.5
82.5
2.58
2
78.4 68.2 1
3.09 2.69
BPEV BPEP BPEG
88 88 91
3.46 3.46 3.58
2 2 2
(working section included)
1 1 1
0 1.5 3 4.5 6 7.5 (US gpm)
20
(psi)
(bar)
X = wrench 24 - 30 Nm (22 lbft) 15
Y = 5 Nm (3.7 lbft)
Pressure
180
10
Legenda 120
BPEN: without amergency actuation T
t⇒
BPEP: push-button type emergency actuation 5 por
60
t
BPEV: screw type emergency actuation por
P⇒
BPET: “push&twist” type emergency actuation 0 0
0 5 10 15 20 25 30 (l/min)
Flow
24 D1WWEB04E
______________________________________________________________________________________________
Outlet section
Dimensions and hydraulic circuit
Without port arrangement With port arrangement
RF type RS - RP - RT types
drawing shows RS type
18 34
0.22
18 34
5.5
0.39
10
0.71 1.34 0.71 1.34

1.004
1.004
25.5
25.5
0.39
10
M8 - nr.2 holes M8 - nr.2 holes
depth 10 - 0.39 depth 10 - 0.39
Y
2.76
2.76
70
70
1.02
26
T
70 70
0.55
14
2.76 2.76
Wrenches and tightening torque RS type RP type RT type

X = allen wrench 8 - 24 Nm (17.7 lbft) P and T ports plugged P open, T plugged T open, P plugged
Y = allen wrench 6 - 24 Nm (17.7 lbft)
P P P
T T T
D1WWEB04E 25
26 D1WWEB04E
SDE060
_________________________________________________________________________________________________
Dimensions
This drawing is referred to directional valve with mixed working sections (2 sections up 60 to l/min-15.8 US gpm and 2 sections up
to 30 l/min-7.9 US gpm), and AN1 type inlet section.
F 70
2.76
E 35
1.38
6.5
0.26
78.8
3.10
0.63
16
M8
T A1 A2 A3 A4
31.5
1.24
228.2
8.98
1.34
1.42
2.76
34
36
70
P B1 B2 B3 B4
0.049
1.25
0.039
1
10 27.5 40.5 46 46 46 38.5

0.39 1.08 1.59 1.81 1.81 1.81 1.52
product code
15B4.......... customer reference
Ref.............
SDE060/4 product name
PA1501568/004 production allotment
AN type inlet section AN1 type inlet section (see drawing) AN2 type inlet section
TYPE E F E F Weight E F
mm in mm in mm in mm in Kg lb mm in mm in
SDE060/1 84.5 3.33 117.5 4.63 106.5 4.19 139.5 5.49 5.08 11.20 137 5.12 170 6.69
SDE060/2 130.5 5.14 163.5 6.44 152.5 6.00 185.5 7.30 7.43 16.38 183 7.21 216 8.50
SDE060/3 176.5 6.95 209.5 8.25 198.5 7.82 231.5 9.11 9.78 21.56 229 9.02 262 10.31
SDE060/4 222.5 8.76 255.5 10.06 244.5 9.63 277.5 10.93 12.13 26.74 275 10.83 308 12.13
SDE060/5 268.5 10.57 301.5 11.87 290.5 11.44 323.5 12.74 14.48 31.92 321 12.64 354 13.94
SDE060/6 314.5 12.38 347.5 13.68 336.5 13.26 369.5 14.55 16.83 37.10 367 14.45 400 15.75
SDE060/7 360.5 14.19 393.5 15.49 382.5 15.06 415.5 16.36 19.18 42.28 413 16.26 446 17.56
SDE060/8 406.5 16.00 439.5 17.30 428.5 16.87 461.5 18.17 21.53 47.47 459 18.07 492 19.37
SDE060/9 452.5 17.81 485.5 19.11 474.5 18.68 507.5 19.98 23.88 52.65 505 19.88 538 21.18
SDE060/10 498.5 19.63 531.5 20.93 520.5 20.49 553.5 21.79 26.23 57.83 551 21.69 584 22.99
D1WWEB04E 27
SDE060
Dimensions__________________________________________________________________________________________________
This drawing is referred to directional valve with all working sections up to 30 l/min (up to 7.9 US gpm), and N1B type inlet
section.
F 70
2.76
E 35
1.38
4.5
0.177
75.2
2.96
M8
A1 A2
28.5
1.12
220.5
31.5
2.76
1.34
1.24
8.68
70
34
23.5
0.93
B1 B2
0.049
1.25
0.177
4.5
10 23.5 37.5 46 38.5

0.39 0.93 1.48 1.81 1.52
product code
15B4.......... customer reference
Ref.............
SDE060/4 product name
PA1501568/004 production allotment
ANB type inlet section AN1B type inlet section (see drawing)
TYPE E F E F Weight
mm in mm in mm in mm in Kg lb
SDE060/1 80 3.15 113 4.45 101.5 3.97 134.5 5.30 4.58 10.10
SDE060/2 126 4.96 159 6.26 147.5 5.81 180.5 7.11 6.61 14.57
SDE060/3 172 6.77 205 8.07 193.5 7.62 226.5 8.92 8.64 19.05
SDE060/4 218 8.58 251 9.88 239.5 9.43 272.5 10.73 10.67 23.52
SDE060/5 264 10.39 297 11.69 285.5 11.24 318.5 12.54 12.70 28.00
SDE060/6 310 12.20 343 13.50 331.5 13.05 364.5 14.35 14.73 32.47
SDE060/7 356 14.02 389 15.31 377.5 14.86 410.5 16.16 16.76 36.95
SDE060/8 402 15.83 435 17.13 423.5 16.67 456.5 17.97 18.79 41.42
SDE060/9 448 17.64 481 18.94 469.5 18.48 502.5 19.78 20.82 45.90
SDE060/10 494 19.45 527 20.75 515.5 20.29 548.5 21.59 22.85 50.38
AN2B type inlet section AN6B-AN7B type inlet sections

TYPE E F E F
mm in mm in mm in mm in
SDE060/1 128 5.04 161 6.34 120.5 4.74 153.5 6.04
SDE060/2 174 6.85 207 8.15 166.5 6.56 199.5 7.85
SDE060/3 220 8.66 253 9.96 212.5 8.37 245.5 9.67
SDE060/4 266 10.47 299 11.77 258.5 10.18 291.5 11.48
SDE060/5 312 12.28 345 13.58 304.5 11.99 337.5 13.29
SDE060/6 358 14.09 391 15.39 350.5 13.80 383.5 15.10
SDE060/7 404 15.91 437 17.20 396.5 15.61 429.5 16.91
SDE060/8 450 17.72 483 19.02 442.5 17.42 475.5 18.72
SDE060/9 496 19.53 529 20.83 488.5 19.23 521.5 20.53
SDE060/10 542 21.34 575 22.64 534.5 21.04 567.5 22.34
28 D1WWEB04E
SDE060
___________________________________________________________________________________________
Hydraulic circuit
Parallel circuit
A parallel circuit can be composed using P or Q working sections.
The outlet section can be with or without port arrangement.
A B A B
M
SDE060/2/AN1(TGW3-175)ELN/Q-18ES3/Q-18ES3/RF-12VDC
Series circuit: only for 60 l/min (15.8 US gpm) sections

The series circuit is composed using alternately QS and Q working sections, both with 1S series spool.
The circuit starts always with QS working section.
The outlet section depends on total number of working sections: if it is even, the outlet section must have P port open, if it is
odd, the outlet section must have T port open.
A B A B
M
T
T
SDE060/2/AN1(TGW3-175)ELN/QS-1S8ES3SE/Q-1S8ES3SE/RP-12VDC
A B A B A B
M
P
T
T
SDE060/3/AN1(TGW3-175)ELN/QS-1S8ES3SE/Q-1S8ES3SE/QS-1S8ES3SE/RT-12VDC
D1WWEB04E 29
SDE060
Complete section ordering codes_____________________________________________________________________
SDE060/4/AN1(TGW3-120)ELN/Q-18ES3/Q-18ES3.BPEN3/Q-18ES3B/
Nr. of working sections 1 2 2 4 2
Q-18ES3B.PS3(DC3-100)/RF-......-12VDC
2 4 3 5 6
6
4
4
3
1 6
6
2
6
SDE060/2/AN1B(JNG3-120)ELN/Q-18ES3B/Q-18ES3B.PS3(DC3-100)/RF-......-12VDC
Nr. of working sections 1 2 2 4 3 5 6
3
6
8
30 D1WWEB04E
SDE060
_____________________________________________________________________
Complete section ordering codes
1 Complete inlet section * page 32 2 Complete working section * page 44

Section bodies are steel made Section bodies are cast iron made
TYPE: AN CODE: 5FIA103103 Sections are arranged for flangeable valve blocks
DESCRIPTION: Without valves arrangement, G1/2 ports P and T open TYPE CODE DESCRIPTION
TYPE: ANB CODE: 5FIA103306 Q-18ES3-WC Y63S603001C Parallel circuit, type 1 double acting
DESCRIPTION: As previous one, G3/8 ports, up to 30 l/min (7.9 US gpm) spool
TYPE: ANP CODE: 5FIA103304 Q-18ES3B-WC Y63S303001C As previous one, up to 30 l/min
DESCRIPTION: As type AN, port P open and T plugged (7.9 US gpm)
TYPE: ANPB CODE: 5FIA103302 Q-28ES3-WC Y63S603002C Parallel circuit, type 2 double acting
DESCRIPTION: As previous one, G3/8 ports, up to 30 l/min (7.9 US gpm) spool
TYPE: ANT CODE: 5FIA103304 Q-28ES3B-WC Y63S303002C As previous one, up to 30 l/min
DESCRIPTION: As type AN, port P plugged and T open (7.9 US gpm)
TYPE: ANTB CODE: 5FIA103302 QS-1S8ES3SE-WC Y63S603003C Series circuit, type 1S double
DESCRIPTION: As previous one, G3/8 ports, up to 30 l/min (7.9 US gpm) acting series spool
TYPE: ANS CODE: 5FIA103305 Q-1S8ES3SE-WC Y63S603005C Parallel circuit, type 1S double
DESCRIPTION: As type AN, ports P and T plugged acting series spool: placed after
TYPE: ANSB CODE: 5FIA103303 QS series section only
DESCRIPTION: As previous one, G3/8 ports, up to 30 l/min (7.9 US gpm)
TYPE: AN1(TGW3-175)ELN-WC CODE: Y61S603000 3 Complete outlet section* page 45
DESCRIPTION: With pressure relief valve and solenoid operated
unloading valve, G1/2 ports P and T open Unless otherwise stated, outlet section bodies are steel made.
TYPE: AN1B(JNG3-120)ELN-WC CODE: Y61S303000 TYPE CODE DESCRIPTION
DESCRIPTION: As previous one, G3/8 ports, up to 30 l/min (7.9 US gpm) RF 3FIA203000 Without ports, aluminium alloy body
TYPE: AN1P(TGW3-175)ELN-WC CODE: Y61S603003 RS 619303200 G1/2 ports, P and T plugged
DESCRIPTION: As type AN1 port P open and T plugged RSB 619301200 As previous one with G3/8 ports,
TYPE: AN1PB(JNG3-120)ELN-WC CODE: Y61S303002 up to 30 l/min (7.9 US gpm)
DESCRIPTION: As previous one, G3/8 ports, up to 30 l/min (7.9 US gpm) RP 619303100 G1/2 ports, P open and T plugged
TYPE: AN2/PPXN1(TGW3-175)ELN-WC CODE: Y61S603001 RPB 619301100 As previous one with G3/8 ports,
DESCRIPTION: With pressure relief valve, solenoid operated up to 30 l/min (7.9 US gpm)
unloading valve and pressure compensated flow control valve, G1/2 RT 619303000 G1/2 ports, T open and P plugged
ports P and T open RTB 619301000 As previous one with G3/8 ports,
TYPE: AN2B/PPXN1(JNG3-120)ELN-WC CODE: Y61S303001 up to 30 l/min (7.9 US gpm)
DESCRIPTION: As previous one, G3/8 ports, up to 30 l/min (7.9 US gpm)
TYPE: AN2P/PPXN1(TGW3-175)ELN-WC CODE: Y61S603006 4 Complete flangeable valve block
DESCRIPTION: As type AN2, port P open and T plugged Antishock valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 50
TYPE: AN2PB/PPXN1(JNG3-120)ELN-WC CODE: Y61S303005 Check valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 51
DESCRIPTION: As previous one, G3/8 ports, up to 30 l/min (7.9 US gpm) Solenoid operated check valves (without coils). . . . . page 52
TYPE: AN6B/EEXL1(VMP02TR-220)-SB10RC(C3)-WC Single counterbalance valves . . . . . . . . . . . . . . . . . . . page 54
CODE: Y61S303006 Double counterbalance valves. . . . . . . . . . . . . . . . . . . page 54
DESCRIPTION: With pressure relief valve and flow control valve, for
Open Center circuit, compensator with 10 bar (145 psi) stand-by,
G3/8 ports P and T open
5 Valve threading
TYPE: AN7B/EEXN1(VMP02TR-200)-SB10RCV(C3)-WC Specify threading always when it is different from BSP standard (see
CODE: Y61S303007 page 4).
DESCRIPTION: As previous one, compensator with stand-by from 0
to 10 bar (0 to 145 psi) and handwheel actuation for Open to Closed 6 Coils page 56
Center switching, G3/8 ports P and T open.
Coils voltage specification; for list of available coils see pages of
related sections
7 Fixing bracket page 59

STAF 5STA148065 Brackets with fixing screws
8 Assembling kit
CODE DESCRIPTION CODE DESCRIPTION
5TIR108099 For 1 section valve 5TIR108329 For 6 section valve
D1WWEB04E 31
SDE060
Inlet section: part ordering codes____________________________________________________________________
Valve setting (bar) Without coil
SDE060/AN-.... SDE060/AN1(TGW3-175)ELN-WC-....
1 6 1 2 3 6
SDE060/ANB-.... SDE060/AN1B(JNG3-120)ELN-WC-....
1 6 1 2 3 6
AN ANB AN1 AN1B
1 1
2 2 1
7
1 3
3
7
Valve setting (bar) Without coil Valve setting (bar)
SDE060/AN2/PPXN1(TGW3-175)ELN-WC-.... SDE060/AN6B/EEXN1(VMP02TS-200)
1 4 2 3 6 1 4 2
SDE060/AN2B/PPXN1(JNG3-120)ELN-WC-.... SB10RCV(C3)-WC-....
1 4 2 3 6 5 Without coil 6
7
4
1
2
AN2B
3
7 5
7
7
4 2
4
AN2
2
7
1
3
1
32 D1WWEB04E
SDE060
___________________________________________________________________
Inlet section: part ordering codes
1 Inlet section body kit * page 34 3 Solenoid operated unloading valve page 40
Section bodies are steel made TYPE CODE DESCRIPTION
TYPE CODE DESCRIPTION For sections AN1-AN2 type
AN 5FIA103103 Without valves arrangement, G1/2 ports, P ELN 0EC10002012 Without emergency override
and T open ELV 0EC10002015 With screw type emergency override
ANB 5FIA103306 As AN, G3/8 ports, up to 30 l/min (7.9 US gpm) ELP 0EC10002014 With push-button emergency override
ANP 5FIA103304 As AN, port P open and T plugged ELT 0EC10002016 With “twist & push” emergency override
ANPB 5FIA103302 As ANP, G3/8 ports, up to 30 l/min (7.9 US gpm) LT 3XTP3544200 Unloading valve blanking plug
ANT 5FIA103304 As AN, port P plugged and T open For sections AN1B-AN2B type
ANTB 5FIA103302 As ANT, G3/8 ports, up to 30 l/min (7.9 US gpm) ELN 0EC08002031 Without emergency actuation
ANS 5FIA103305 As AN, ports P and T plugged ELV 0EC08002034 With screw type emergency actuation
ANSB 5FIA103303 As ANS, G3/8 ports, up to 30 l/min (7.9 US gpm) ELP 0EC08002033 With push-button emergency actuation
AN1 5FIA103307 Relief and unloader valves arrangement, G1/2 ELT 0EC08002035 With “twist & push” emergency actuation
ports, P and T open LT XTAP510320 Unloading valve blanking plug
AN1P 5FIA103314 As AN1, port P open and T plugged
AN1B 5FIA103300 As AN1, G3/8 ports, up to 30 l/min (7.9 US gpm) 4 Flow control valve page 41
AN1PB 5FIA103312 As AN1P, G3/8 ports, up to 30 l/min (7.9 US gpm)
AN2 5FIA10331 Relief, unloader and flow control valves TYPE CODE DESCRIPTION
arrangement, G1/2 ports, P and T open For sections AN1-AN2 type
AN2P 5FIA103315 As AN2, port P open and T plugged PPAL1 0PP12002000 Hand-wheel setting type
AN2B 5FIA103309 As AN2, G3/8 ports, up to 30 l/min (7.9 US gpm) PPAV1 0PP12002004 Screw setting type
AN2PB 5FIA103313 As AN2P, G3/8 ports, up to 30 l/min (7.9 US gpm) PPXN1 0PP12002037 Solenoid operated, without emergency
AN6B 5FIA103316 For Open Center, relief and flow control valves PPXV1 0PP12002039 Solenoid operated, screw emergency
arrangement, compensator, LS port plugged, PPXL1 0PP12002041 Solenoid operated, hand-wheel
G3/8 P and T ports open emergency
AN7B 5FIA103317 As AN6B, for Closed Center, with LS port open LT 3XTP3558200 Flow control valve blanking plug
For sections AN1B-AN2B type
PPAL1 0PP10002000 Hand-wheel setting type
2 Main relief valve page 38 PPAV1 0PP10002005 Screw setting type
TYPE CODE DESCRIPTION PPXN1 0PP10002031 Solenoid operated, without emergency
For sections AN1-AN2 type PPXV1 0PP10002033 Solenoid operated, screw emergency
Valve standard setting is referred to 5 l/min (1.3 US gpm) flow. PPXL1 0PP10002035 Solenoid operated, hand-wheel
(TGW2-80) 0MC10002023 Range 10-120 bar (145-1750 psi) emergency
std setting 80 bar (1160 psi) LT 3XTP3545700 Flow control valve blanking plug
(TGW3-175) 0MC10002024 Range 40-200 bar (580-2900 psi) For sections AN6B-AN7B type
std setting 175 bar (2550 psi) EEXN1 0EE10002009 Solenoid operated, without emergency
(TGW4-250) 0MC10002025 Range 200-350 bar (2900-5100 psi) EEXL1 0EE10002008 Solenoid operated, hand-wheel
std setting 250 bar (3600 psi) emergency
SV XTAP526360 Relief valve blanking plug
For sections AN1B-AN2B typeV 5 Compensator kit page 43
Valve standard setting is referred to 10 l/min (2.6 US gpm) flow,
considering the valve mounted on inlet section. TYPE CODE DESCRIPTION
(JNG2-63) 5KIT105512 Range 40-63 bar (580-900 psi) For section AN6B type
std setting 63 bar (900 psi) SB10RCV(C3) 5KT6200227 With 10 bar (145 psi) stand-by, hand-
(JNG3-120) 5KIT105513 Range 50-200 bar (725-2900 psi) wheel actuation for Open Center to
std setting 120 bar (1750 psi) Closed Center switching
(JNG4-220) 5KIT105514 Range 160-315 bar (2300-4600 psi) SB10RC(C3) 5KT6200222 With 10 bar (145 psi) stand-by,
std setting 220 bar (3200 psi) for Open Center circuit
(JNH2-63) 5KIT105517 As type JNG2, set and locked For section AN7B type
(JNH3-120) 5KIT105516 As type JNG3, set and locked CL X451810000 Compensator blanking plug, for
(JNH4-220) 5KIT105515 As type JNG4, set and locked Closed Center circuit
(JNZT2-63) 5KIT105562 As type JNG2, anti-tampering type
(JNZT3-120) 5KIT105563 As type JNG3, anti-tampering type 6 Section threading
(JNZT4-220) 5KIT105564 As type JNG4, anti-tampering type Specify threading always when it is different from BSP standard (see
SV XTAP623282 Relief valve blanking plug page 4).
Valve standard setting is referred to 1 l/min (0.26 US gpm) flow,
considering the valve mounted on inlet section.
7 Optional coil page 56
(VMP02TV-50) 1100000100 Range 5-80 bar (73-1160 psi) For list of available coils see pages of related section.
(VMP02TS-150) 1100000101 Range 50-220 bar (725-3200 psi)
(VMP02TR-250) 1100000102 Range 180-350 bar (2600-5100 psi)
D1WWEB04E 33
SDE060
AN-ANB inlet sections
AN type ANB type

with P and T ports open with P and T ports open
0.39
23 34
10
18 34
0.39
10
0.91 1.34 0.71 1.34
M8 - nr.2 holes M8 - nr.2 holes

depth 10 - 0.39 depth 10 - 0.39
X X
2.76
2.76
70
70
M
36.5
36.5
M
1.44
1.44
80 70
3.15 2.76
T P T P
28.5
1.12
1.30
1.30
33
37.5
1.48
33
14 41
14.25
0.56
16.5 46 0.55
16.5
1.61
0.65
0.65 1.81

AN-ANB type ANP-ANPB type ANT-ANTB type ANS-ANSB type

P and T ports open P port open and T port plugged P port plugged and T port open P and T ports plugged
M M M M
P P P P
T T T
T
34 D1WWEB04E
SDE060
___________________________________________________
AN1-AN1B inlet sections
AN1 type with P and T ports open AN1B type with P and T ports open
18.5 34 M8 - nr.2 holes

0.39
M8 - nr.2 holes
10
18 34
0.39
0.73 1.34 depth 10 - 0.39
10
0.71 1.34 depth 10 - 0.39
1.004
25.5
0.91
23
1 2
X X
2
1
2.76
2.76
70
70
M
48.5
1.91
38.5
1.52
42.5
M
1.67
1.54
39
19.5
0.77
0.55
14
70 66.5
70 66.4
2.76 2.62
2.76 2.61
180.3 182.5
7.10 7.19
P
P
T
2.05
52
36.5
2.17
33.5
1.44
1.32
55
39.5
1.56
37.5
14.5
1.48
14.5
0.57
0.57
16.5
T
0.65
0.63
16
28.5 28
16.5 37 1.12 1.10
0.65 1.46
Legenda

pages 38 and 40.
AN1-AN1B types AN1P-AN1PB types

P and T ports open P port open and T port plugged
M M
P P
T T
D1WWEB04E 35
SDE060
Inlet section: dimension and hydraulic circuit ___________________________________________________
AN2-AN2B inlet sections

AN2 type with P and T ports open
32 34
1.26 1.34
1
10
0.39
M8 - nr.2 holes
depth 10 - 0.39 Legenda
3 2 1: Pressure relief valve
3: Pressure compensated flow control valve
X
M X = allen wrench 6 - 24 Nm (17.7 lbft)
NOTE: for valve wrench and torque see pages
73.5
from 38 to 42.
3.15
2.89
80
2.48
2.44
63
62
0.91
23
90 66.4
3.54 2.61
253.3
9.97
P
85.5
3.37
3.54
90
T AN2-AN2B types
50.5
1.99
1.97
50
1.22
P and T ports open

31
0.63
16
16.5 57 M
0.65 2.24
AN2B type with P and T ports open

P
18 34 10
0.71 1.35 0.39
M8 - nr.2 holes
depth 10 - 0.39
3 2 T
X
M
56 AN2P-AN2PB types
3.23
2.20
82
P port open and T port plugged

2.60
2.60
66
61.5
2.42
66
23.5
0.93
M
70 66.5
2.76 2.62
232.5 P
9.15
76.5
3.01
3.19
81
T T
1.77
1.77
45
45
P
28.5
1.12
20.5
0.81
15.25 41.25
0.60 1.62
36 D1WWEB04E
SDE060
___________________________________________________
AN6B-AN7B inlet sections
AN6B type; configuration for Open and Closed Center
70
2.76
18 34
0.71 1.34
Legenda
2: Flow control valve
0.39
10
2.72
69
3: Excludable compensator
Wrenches and tightening torque M8 - nr.2 holes

X = allen wrench 6 - 24 Nm (17.7 lbft) depth 10 - 0.39
X X
Y = allen wrench 4 - 9.8 Nm (7.2 lbf)
pages 39 and 43.
3
Y
184 max
7.24 max
T 1
3.74
95
2
P
2.40
2.28
61
58
LS
1.38
35
0.91
0.91
0.91
M
23
23
23
33.5 17.5 20.5 20
1.32 0.69 X 0.81 0.79
X
166.5
6.56
48.5 21.5 4.5
1.91 0.85 0.18
X
X
33.5
1.32
0.94
24
16.5
0.65
X
0.18
4.5
AN6B type AN7B type AN7B type

for Open Center circuit for Closed Center circuit for Closed and Open Center circuits
M M M
P P P
LS LS LS
T T
T
D1WWEB04E 37
SDE060
Main relief valve
Setting types Setting range: TGW2 type Setting range: TGW3 type
TGW 0 3 6 9 12 15 (US gpm) 0 3 6 9 12 15 (US gpm)
400 400
Y Z (bar)
(psi)
(bar)
(psi)
X 5000 5000
300 300
4000 4000
Pressure
Pressure
max. setting
200 3000 200 3000
43
max. setting std. setting
1.69 2000 2000
TZW 1000 1000
min. setting min. setting
0 0 0 0
0 10 20 30 40 50 60 (l/min) 0 10 20 30 40 50 60 (l/min)
Flow Flow
51
2.01
Setting range: TGW4 type
0 3 6 9 12 15 (US gpm)
Legenda 400 (psi)
(bar)
TGW: screw setting type max. setting 5000
TZW: with anti-tampering cap 300 std. setting 4000
(cap code 4COP126300, nr. 2 pcs) Pressure
min. setting 3000
200
X = allen wrench 5 2000
100
Y = wrench 19 - 20 Nm (14.8 lbft) 1000
Z = wrench 27 - 50 Nm (37 lbft)
0 0
0 10 20 30 40 50 60 (l/min)
Flow
For sections AN1B and AN2B type
Setting types Setting range: JNG2 type Setting range: JNG3 type
0 1 2 3 4 5 6 7 (US gpm) 0 1 2 3 4 5 6 7 (US gpm)
JG 400 400
(psi) (psi)
Y Z (bar) (bar)
5000
5000
300 300
X 4000 4000
Pressure
Pressure
max. setting
45.5 3000 200 3000
200
1.79 std. setting
2000 2000
JH 100 100
max. setting 1000
1000
min. setting
min. setting
0 0 0 0
0 5 10 15 20 25 30 0 5 10 15 20 25 30
59.5
2.34
JZT
Setting range: JNG4 type
0 1 2 3 4 5 6 7 (US gpm)
59
Legenda 400 (psi)
(bar)
2.32 JG: screw setting type 5000
max. setting
JH: valve set and locked 300
std. setting 4000
Pressure
JZT: valve set and locked 200 3000

min. setting
2000
100
X = allen wrench 4
0 0
Y = wrench 13 - 24 Nm (17.7 lbft)
0 5 10 15 20 25 30
Z = wrench 19 - 24 Nm (17.7 lbft) (l/min)
Flow
38 D1WWEB04E
SDE060
____________________________________________________________________________________
Main relief valve
Setting range: VMP02TV type Setting range: VMP02TS type

36 0 3 6 9 12 15 (US gpm) 0 3 6 9 12 15 (US gpm)
1.42 400 400 (psi)
(psi) (bar)
(bar) 5000
Z 5000
300
Y 300
4000 4000
Pressure
max. setting
Pressure
3000 200 3000

200
X
max. setting 100
100 min. setting
1000 1000
std. setting min. setting
0 0 0 0
0 10 20 30 40 50 60 0 10 20 30 40 50 60
Flow (l/min)
Flow (l/min)
Wrenches and tightening torque Setting range: VMP02TR type

X = wrench 10
0 3 6 9 12 15 (US gpm)
Y = wrench 10 - 6.6 Nm (4.9 lbft) 400
max. setting (psi)
Z = wrench 19 - 24 Nm (17.7 lbft) (bar)
5000
300
std. setting 4000
Pressure
min. setting
200 3000
2000
100
1000
0 0
0 10 20 30 40 50 60
Flow (l/min)
D1WWEB04E 39
SDE060
Unloading valve
Manual emergency actuation types

X
0 3 6 9 12 15 (US gpm)
Y
20
ELN 2
(bar)
(psi)
16 240
1
180
Pressure
12
66.5
2.62 8 120
4 60
ELP ELV ELT
0 0
0 10 20 30 40 50 60 (l/min)
Flow
89.5 89.5 92
3.52 3.52 3.62
2 2 2
1 1 1
Legenda Features
ELN: without amergency actuation Max. flow. . . . . . . . . . . . . . . . : 40 l/min (10.6 US gpm)
ELP: push-button type emergency actuation Max. pressure. . . . . . . . . . . . . : 380 bar (5500 psi)
ELV: screw type emergency actuation Internal leakage. . . . . . . . . . . : 0.25 cm3/min @ 210 bar
ELT: “push&twist” type emergency actuation (0.015 in3/min @ 3050 psi)
For coil features and options see BER coil on pages 56 and 57
Y = 5 Nm (3.7 lbft)
Manual emergency actuation types
X Pressure drop diagram

Y 0 1.5 3 4.5 6 7.5 (US gpm)
ELN 2 10
(psi)
(bar)
8 120
1
90
Pressure
66.5 6
2.62
4 60
ELP ELV ELT 2 30
0 0
88 88 91
0 5 10 15 20 25 30
3.46 3.46 3.58
Flow (l/min)
2 2 2
1 1 1
Legenda Features
ELN: without amergency actuation Max. flow. . . . . . . . . . . . . . . . : 40 l/min (10.6 US gpm)
ELP: push-button type emergency actuation Max. pressure. . . . . . . . . . . . . : 380 bar (5500 psi)
ELV: screw type emergency actuation Internal leakage. . . . . . . . . . . : 0.25 cm3/min @ 210 bar
ELT: “push&twist” type emergency actuation (0.015 in3/min @ 3050 psi)
For coil features and options see BER coil on pages 56 and 57
Y = 5 Nm (3.7 lbft)
40 D1WWEB04E
SDE060
____________________________________________________________________________________
For section AN2 type
Manual operated Solenoid operated Flow regulation diagram
60
(l/min) 15
(US gpm)
PPAV1 45 12
2 3
K K 2 3 PPXN1 9
30
6
1 1 15
46 3
1.81 97
X 0 0
PPAL1 3.82
0 20 40 60 80 100 (%)
2 3 W Z Y X
2 3 PPXV1 Valve operation
X (A@12VDC)
0 0.25 0.50 0.75 1.00 1.25
1
1 0.63
45 111 0 0.10 0.20 0.30 0.40 0.50 0.60 (A@24VDC)
1.77 4.37
Coil current
2 3 PPXL1
Flow vs. Pressure diagram

1
144.5 0 800 1600 2400 3200 4000 (psi)
5.69 60
(l/min) 15
Legenda (US gpm)
PPAV1: screw setting type 45 12
PPAL1: hand-wheel setting type
PPXN1: without emergency actuation 9
Flow
30
PPXV1: screw type emergency actuation
6
PPXL1: hand-wheel emergency actuation
15
on P2 line 3
Wrenches and tightening torque on P3 line
K = wrench 10 - 6.6 Nm (4.9 lbft) 0 0
0 50 100 150 200 250 300 (bar)
Pressure
Y = 5 Nm (3.7 lbft)
W = allen wrench 4
Features
Max. inlet flow . . . . . . . . . . . . : 90 l/min (23.8 US gpm)
Max. regulated flow. . . . . . . . . : 50 l/min (13.2 US gpm) - PPA types
60 l/min (16 US gpm) - PPX types
Inlet flow (PPX types) . . . . . . . : regulated flow +15%
Max. pressure. . . . . . . . . . . . . : 350 bar (5100 psi) - PPA types
315 bar (4600 psi) - PPX types
Internal leakage (PPX types) . . : 250 cm3/min a 210 bar
(15.3 in3/min @ 3050 psi)
D1WWEB04E 41
SDE060
For section AN2B type
Manual operated Solenoid operated

Flow regulation diagram
40
(l/min) 10
(US gpm)
PPAV1 30 8
2 3 K 2 3 PPXN1
K 6
Flow
20
4
1 1
41.5 10
2
1.63
X 96
3.78 0
PPAL1 0
2 3
W Z Y X 0 20 40 60 80 100 (%)
X 2 3 PPXV1 Valve operation
(A@12VDC)
1 0 0.25 0.50 0.75 1.00 1.25
1
45 110 0.63
1.77 4.33 0 0.10 0.20 0.30 0.40 0.50 0.60 (A@24VDC)
Coil current
2 3 PPXL1
1 Flow vs. Pressure diagram

143.5
0 800 1600 2400 3200 4000 (psi)
5.65 40
Legenda (l/min) on P2 line 10
on P3 line (US gpm)
PPAV1: screw setting type
30 8
PPAL1: hand-wheel setting type
PPXN1: without emergency actuation 6
Flow
20
PPXV1: screw type emergency actuation
PPXL1: hand-wheel emergency actuation 4
10
2
K = wrench 10 - 6.6 Nm (4.9 lbft) 0 0
X = wrench 27 - 50 Nm (37 lbft) 0 50 100 150 200 250 300 (bar)
Y = 5 Nm (3.7 lbft) Pressure
W = allen wrench 4
Features
Max. inlet flow . . . . . . . . . . . . : 50 l/min (13.2 US gpm)
Max. regulated flow. . . . . . . . . : 30 l/min (7.9 US gpm)
Inlet flow (PPX types) . . . . . . . : regulated flow +5%
Max. pressure. . . . . . . . . . . . . : 350 bar (5100 psi) - PPA types
315 bar (4600 psi) - PPX types
Internal leakage (PPX types) . . : 150 cm3/min @ 210 bar
(9.1 in3/min @ 3050 psi)
42 D1WWEB04E
SDE060
____________________________________________________________________________________

Curves are measured using the standard compensator mounted on section, with 10 bar (145 psi) stand-by.
Flow regulation diagram Flow vs. Pressure diagram

0 500 1000 1500 2000 2500 (psi)
50 40
(l/min) 12 10
(l/min)
(US gpm) (US gpm)
40
EEXN1 10 30 8
30 8
6
Flow
Flow
6 20
20
4
4
92 10
10 2
2
3.62
2
0 0 0 0
0 20 40 60 80 100 (%) 0 40 80 120 160 200 (bar)
Valve operation Pressure
1
Z Z Y X 0 0.25 0.50 0.75 1.00 1.25 (A@12VDC)
EEXL1
0.63
0 0.10 0.20 0.30 0.40 0.50 0.60 (A@24VDC)
Coil current
121.5
4.78
2
Features
1
Max. flow. . . . . . . . . . . . . . . . : 40 l/min (10.6 US gpm)
Legenda Max. pressure. . . . . . . . . . . . . : 300 bar (5500 psi)
EEXN1: without emergency actuation Internal leakages . . . . . . . . . . : 150 cm3/min @ 150 bar
EEXL1: hand-wheel emergency actuation (9.1 in3/min @ 2175 psi)
K = wrench 10 - 6.6 Nm (4.9 lbft)
Y = 5 Nm (3.7 lbft)
Z = wrench 13 - 9.8 Nm (7.2 lbft)
Compensator kit
SB10RCV(C3)
Y Legenda
3.50 max
89 max
SB10RC(C3) CL SB10RC(C3): compensator with 10 bar (145 psi) stand-by, for Open
X
X X Center circuit
CL: compensator blanking plug, for Closed Center circuit
27.2
1.07
19.5
0.77
SB10RCV(C3): compensator with 10 bar (145 psi) stand-by, hand-

wheel actuation for Open Center to Closed Center circuit switching
c.c. c.a.
Y = wrench 13 - 6.6 Nm (4.9 lbft)
D1WWEB04E 43
SDE060
Working section: part ordering codes_______________________________________________________________
Valve setting (bar)
SDE060 / P - 1 8ES3 . P3(G3-100) - WC - ......

1 2 3 4 without 5
coil
3
6
1
3
2 3
1 Working section body kit * page 45 2 Spool page 47

Section bodies are cast iron made TYPE CODE DESCRIPTION
TYPE CODE DESCRIPTION For ON/OFF solenoid control
Sections with standard threads: G3/8 1 3CU9010102 Double acting, A and B closed in neutral pos.
Q 5EL1033000 Parallel type, with arrangement for 1A 3CU9010103 Double acting, A to tank in neutral pos. For
upper flangeable valve block connect B to tank (type 1B) is necessary to
QS 5EL2033000 As type Q, for series circuit: need spool turn the spool
type 1S#. Only for section up to 2 3CU9025100 Double acting, A and B to tank in neutral pos.
60 l/min (15.8 US gpm) 2H 3CU9025225 Double acting, A and B partially to tank in
Q(8) 5EL1033500 As type Q, for regenerative circuit on neutral position
port A: need spool type 8 1S 3CU9010101 Double acting, for series circuit: needs control
P 5EL1033010 As type Q, with arrangement for type 8ES3SE and section type QS-QSNF#
secondary relief valve 8 3CU9080100 Double acting, for regenerative circuit,
Sections with increased threads: G1/2 for 30 l/min (7.9 US gpm): needs section
NF-BSP12 5EL1034010 Parallel type, without arrangement for type Q8
upper flangeable valve block For ON/OFF solenoid control with emergency lever operation
QSNF-BSP12 5EL1034011 As type Q, for series circuit: needs spool 1LHD 3CU9010300 As type 1
type 1S#. Only for SDE060 valve 1ALHD 3CU9010303 As type 1A
QNF(8)-BSP12 5EL1034500 As type Q, for regenerative circuit on 2LHD 3CU9020300 As type 2
port A: needs spool type 8 2HLHD 3CU9020310 As type 2H
PNF-BSP12 5EL1034000 As type Q, with arrangement for
secondary port valves 4 Port relief valves page 46
Standard setting is referred to 10 l/min (2.6 US gpm) flow.
3 On/off solenoid control page 48 TYPE CODE DESCRIPTION
TYPE CODE DESCRIPTION P(G3-100) 5KIT060000 From 50 to 200 bar (725 to 2900 psi),
For section up to 60 l/min (15.8 US gpm) standard setting 100 bar (1450 psi)
8ES1 5CAN08E110C Single acting on port A P(G4-200) 5KIT060001 From 200 to 315 bar (2900 to 4600 psi),
8ES2 5CAN08E110C Single acting on port B standard setting 200 bar (2900 psi)
8ES3 5CAN08E111C Double acting P3T 5KIT060100 A and B ports valve blanking plugs
8ES3LHD 5CAN08E311 Double acting with emergency lever
operation: needs dedicated spools 5 Section threading
8ES3SE 5CAN08E116C Double acting: for spool type 1S# Specify threading always when it is different from BSP standard (see
For section up to 30 l/min (7.9 US gpm) page 4).
8ES1B 5CAN08E114C Single acting on port A
8ES2B 5CAN08E114C Single acting on port B 6 Optional coils page 56
8ES3B 5CAN08E115C Double acting
8ES3BLHD 5CAN08E315 Double acting with emergency lever For list of available coils see pages of related sections
operation: needs dedicated spools
NOTES (#) – For Series circuit configuration rules see page 29.
NOTAS (*) – Codes are referred to BSP thread.
44 D1WWEB04E
SDE060
___________________________________________________________________________________________
Working section
Working section Q type
Q type: parallel circuit Q8 type: regenerative circuit

(with spool type 1) (needs spool type 8)
A B A B
62.5
2.46
27.5
1.08
Valve fixing plan
68.2
0.30
7.5
2.69
Standard port thread: G3/8

with arrangement for valve blocks
6.1 56
0.24 2.20
A B
1.34
1.81
34
46
0.91
23
QS type for series circuit

18.4 31.5
(needs spool type 1S)
0.24
0.72 1.24
6
A B
Increased port thread: G1/2

without arrangement for valve blocks (NF type)
A B
1.81
46
0.91
23
17.6 33
0.69 1.30
Flow through pressure drop Flow through pressure drop

(parallel and regenerative circuits) (QS series section with 1S spool)
0 3 6 9 12 15 (US gpm) 0 3 6 9 12 15 (US gpm)
1.5 20
20 (psi)
(bar) (bar)
(psi) 240
1.2 16
15
Pressure
180
Pressure
0.9 12
10
0.6 8 120
5 4 60
0.3
0 0 0 0
0 10 20 30 40 50 60 (l/min) 0 10 20 30 40 50 60 (l/min)
Flow Flow
D1WWEB04E 45
SDE060
Working section___________________________________________________________________________________________
Dimension and hydraulic circuit
Working section P type

With arrangement for secondary port valves.
P type section is available also with increased port threads (G1/2): see Q type section for dimensional data.
0.67
P type: parallel circuit

17
(with spool type 1)
1.81
A B
46
0.91
24.5 19 23
14.5
0.57
0.96 0.75
62.5
2.46
27.5
1.08
Valve fixing plan

0.30
7.5
68.2
2.69
Port relief valves
G type Setting range: G3 type

0 0.3 0.6 0.9 1.2 1.5 (US gpm)
400 (psi)
(bar)
5000
300
4000
Pressure
max. setting 3000

200
X
26.5
1.04
2000
Y
100
Z 1000
min. setting
0 0
H type 0 1 2 3 4 5 6 (l/min)
Flow
Setting range: G4 type

0 0.3 0.6 0.9 1.2 1.5 (US gpm)
400 (psi)
(bar)
5000
max. setting
300
4000
Pressure
200 3000
Legenda min. setting 2000
G: screw setting type 100
H: valve set and locked 1000
0 0
Wrenches and tightening torque 0 1 2 3 4 5 6 (l/min)
X = wrench 17 - 24 Nm (17.7 lbft) Flow
Y = wrench 8 - 6.6 Nm (4.9 lbft)
Z = allen wrench 2.5
46 D1WWEB04E
SDE060
__________________________________________________________________________________________
Working section
Spools
Types 1-1LHD Types 1A-1ALHD Types 2-2LHD

Double acting, A and B closed Double acting, A to tank in Double acting, A and B to tank
in neutral position neutral position in neutral position
1 0 2 1 0 2 1 0 2
A B A B A B
P T P T P T
P⇒port - port⇒T pressure drops P⇒port - port⇒T pressure drops

(curves are matched) (curves are matched)
0 3 6 9 12 15 (US gpm) 0 3 6 9 12 15 (US gpm)
20 20
(psi) (psi)
(bar) (bar)
16 240 16 240
180 180
Pressure
Pressure
12 12
8 120 8 120
4 60 4 60
0 0 0 0
0 10 20 30 40 50 60 (l/min) 0 10 20 30 40 50 60 (l/min)
Flow Flow
Types 2H-2HLHD Types 1S Types 8

Double acting, A and B partially to Double acting, for series circuit Double acting, for regenerative
tank in neutral position circuit
1 0 2 1 0 2 1 0 2
A B A B A B
P T P T P T
P⇒port - port⇒T pressure drops P⇒port - port⇒T pressure drops P⇒port - port⇒T pressure drops
(curves are matched) (curves are matched) indicated for 30 l/min (7.9 US gpm) max
0 3 6 9 12 15 (US gpm) 0 3 6 9 12 15 (US gpm) 0 1.5 3 4.5 6 7.5 (US gpm)
20 40 10
(psi) (psi) (psi)
(bar) (bar) (bar)
240 480 8 120
16
30
90
Pressure
180 360
Pressure
Pressure
12 6
P ⇒ A1
20
8 120 240 4 60
B1 ⇒ T
10
4 60 120 2 30
0 0 0 0 0 0
0 10 20 30 40 50 60 (l/min) 0 10 20 30 40 50 60 (l/min) 0 5 10 15 20 25 30 (l/min)
Flow Flow Flow
D1WWEB04E 47
SDE060
Working section___________________________________________________________________________________________
On/off solenoid control: 8ES3 - 8ES1 - 8ES2 - 8ES3SE types

For section configuration up to 60 l/min (15.8 US gpm) flow rate.
When the section is configurated with flangeable valve block, the coils on control must be rotated 180°
8ES3 - 8ES3SE: double acting control kit 8ES1: single acting on A control kit
1 0 2 1 0 2
Y X Y X
Z
80 80 80 7.9
3.15 3.15 3.15 0.31
228.2 156.1
8.98 6.15
Operating condition
(stroke 3 mm - 0.12 in) Wrenches and tightening 8ES2: single acting on B control kit
(bar) 0 3 6 9 12 15 (US gpm) torque
420 6000
(psi)
X = wrench 20 - 24 Nm (17.7 lbft) 1 0 2
360 Y = 15 Nm (11 lbft)
5000
Z = wrench 24 - 24 Nm (17.7 lbft) X Y
300
4000 Z
Pressure
240
3000
For coil options and features see
180 D15C coil on pages 56 and 58.
2000
120
1000 SDE060 with 8ES3 control kit;
60
parallel circuit 7.9 80
0 0 SDE060 with 8ES3SE control kit; 0.31 3.15
0 10 20 30 40 50 60 (l/min) series circuit 156.1
Flow 6.15
On/off solenoid control with lever: type 8ES3LHD

For section configuration up to 60 l/min (15.8 US gpm) flow rate; this control is not suitable for series circuit.
To properly operation the coil on lever side must be rotated 10° (figure A).
When the section is configurated with flangeable valve block, the control (with coil) must be rotated 180°.
20°
22°2
figure A 3’
2 22
11°22’ °2
2 3’
10° 1 0 2 1
J
11
34.5
°2
1
2’
1.36
3.66
93
0.98
25

80 141
3.15 5.55 Wrenches and tightening torque
289.2
11.39 J = wrench 4 - 9.8 Nm (7.2 lbft)
Y X K K = allen wrench 4 - 6.6 Nm (4.9 lbft)
X = wrench 20 - 24 Nm (17.7 lbft)
0.59
15
Y = 15 Nm (11 lbft)
Control features
M8 For coil options and features see D15C coil
on pages 56 and 58.
48 D1WWEB04E
SDE060
___________________________________________________________________________________________
Working section
On/off solenoid control: 8ES3B - 8ES1B - 8ES2B types

For section configuration up to 30 l/min (7.9 US gpm) flow rate; control is not suitable for series circuit
When the section is configurated with flangeable valve block, the coils on control must be rotated 180°
8ES3B: double acting control kit 8ES1B: single acting on A control kit
1 0 2 1 0 2
Y X Y X
Z
76 76 76 6.4
2.99 2.99 2.99 0.25
220.2 150.6
8.67 5.93
Operating condition
(stroke 3 mm - 0.12 in) 8ES2B: single acting on B control kit
(bar) 0 1.5 3 4.5 6 7.5 (US gpm)
420 6000
(psi)
1 0 2
360 5000 Y X
300 Wrenches and tightening
4000 torque Z
Pressure
240
3000 X = wrench 17 - 24 Nm (17.7 lbft)
180 Y = 6.6 Nm (4.9 lbft)
2000
120 Z = wrench 24 - 24 Nm (17.7 lbft)
60 1000
For coil options and features see 6.4 76
0 0 0.25 2.99
D12C coil on pages 56 and 58.
0 5 10 15 20 25 30 (l/min) 150.6
Flow 5.93
On/off solenoid control with lever: 8ES3BLHD type

For section configuration up to 30 l/min (7.9 US gpm) flow rate; this control is not suitable for series circuit
When the section is configurated with flangeable valve block, the control (with coil) must be rotated 180°.
22°2
3’
2 22
20° 11°22’ °2
2 3’
1
0
11
1 2
° 22
1
J
’
34.5
1.36
3.66
93
0.98
25

76 137
2.99 5.39 Wrenches and tightening torque
281.2
11.07 J = wrench 4 - 9.8 Nm (7.2 lbft)
Y X K K = allen wrench 4 - 6.6 Nm (4.9 lbft)
X = wrench 17 - 24 Nm (17.7 lbft)
0.59
15
Y = 6.6 Nm (4.9 lbft)

Control features
M8 For coil options and features see D12C coil on
pages 56 and 58.
D1WWEB04E 49
SDE060
Flangeable valve blocks_________________________________________________________________________________
Antishock valves with cross operation

8ES on/off solenoid controls (with or without lever operation) must be rotated 180°.
PS3 type: valves on both ports PS1 or PS2 types: valve on single port
(PS1 type is drawn: PS2 type has the valve mounted on the
Y opposite side and the same dimensions)
X Z
Y PS1 type
15.5
X Z
0.61
2.68
68
A B
43.5
1.71
36.5
1.44
15.5
0.61
A B
70 57.5 68
2.76 2.26 2.68
185 125.5
7.28 4.94
valve operation PS2 type
A B on port A
A B
A B
1.77
43.5
1.71
45
22.5
22.5
0.89
0.89
valve operation 19.5 31 19.5 29
on port B 0.77 1.22 K 0.77 1.14 K
NOTE: for valve block assembly
direction refer to ports name
K = allen wrench 4 - 9.8 Nm (7.2 lbft)
Ordering codes X = wrench 19 - 42 Nm (31 lbft)
Y = wrench 13 - 24 Nm (17.7 lbft)
TYPE CODE DESCRIPTION Z = wrench 13 - 6.6 Nm (4.9 lbft)
Complete antishock valves
PS1(DC3-160) 619001000 Valve with operation on port A
PS2(DC3-160) 619001000 Valve with operation on port B
Antishock valve pressure drops
PS3(DC3-160\DC4-200)
P⇒port - port⇒T
619001103 Valves with operation on port A (160)
(curves are matched)
and B (200)
0 3 6 9 12 15 (US gpm)
Part #1: Valve kit 10
Valve standard setting is referred to 5 l/min (1.3 US gpm) flow, (bar)
considering the valve mounted on block. 8 120
(DC2-60) 1100520460 Range 20-80 bar (290-1150 psi)

90
Pressure
std setting 60 bar (870 psi) 6

(DC3-160) 1100520408 Range 50-220 bar (725-3200 psi)
4 60
(DC4-280) 1100520414 Range 180-350 bar (2600-5100 psi) 30
2
PST XTAP623282 Valve blanking plug 0 0
Part #2: Block body kit 0 10 20 30 40 50 60 (l/min)
PS1-PS2 5COR245682 For single valve on port A or B Flow
PS3 5COR245680 For valves on port A and B
Setting range
0 3 6 9 12 15 (US gpm)
400 (psi)
(bar)
5000
300
4000
Control description
Pressure
2 8ES3BLHC180 3000
200
1 2000
100
1000
0 0
0 10 20 30 40 50 60 (l/min)
Flow
Valve type DC2

Control description Valve type DC3
8ES3B180 Valve type DC4
50 D1WWEB04E
SDE060
_________________________________________________________________________________
Flangeable valve blocks
Check valves
0.63
16
43.5
1.71
BP3 type BP1 type BP2 type
A B A B A B
14.5 94
0.57 3.70
123
4.84
X
A B
1.77
45
22.5
0.89
16 62
0.63 2.44 K

Ordering codes Check valve pressure drop

0 3 6 9 12 15 (US gpm)
TYPE CODE DESCRIPTION 40
(psi)
Complete valve block (bar)
BP1 619002000 Valve on port A 480
30
BP2 619002000 Valve on port B
P ⇒ port
Pressure
360
BP3 619002100 Valves on ports A and B
Part #1: Valve kit 20
port ⇒ T 240
BP 1300020402 Check valve
TBP XTAP627260 Valve blanking plug 10
120
Part #2: Body kit and piston
- 5COR245892 Block body kit 0 0
- 3PIS214480 Piston 0 10 20 30 40 50 60 (l/min)
Flow
1
Control description
8ES3B180
Control description
8ES3BLHC180
D1WWEB04E 51
SDE060

BPE(NC) type: normally closed circuit

X
Y BPEN3(NC) type
A B
43.5
1.71
95 62.8
0.63
16
3.74 2.47
220.6
8.69
K
BPEN
A B
1.77
45
22.5
0.89
BPEN1(NC) type BPEN2(NC) type

14 67 2 A B A B
0.55 2.64
1
BPEV BPEP BPEG
77.3 90.8 83.6

3.04 3.57 3.29
2 2 2
1 1 1 Wrenches and tightening torque

Y = 5 Nm (3.7 lbft)
BPE(NA) type: normally open circuit

X
Y BPEN3(NA) type
A B
43.5
1.71
95 66.5
0.63
16
3.74
228
K
BPEN
A B
1.77
45
22.5
0.89
BPEN3(NA) type BPEN3(NA) type

14 67 2
A B A B
0.55 2.64
1
BPEV BPEP BPEG
88 88 91
3.46 3.46 3.58
2 2 2
1 1 1
52 D1WWEB04E
SDE060
________________________________________________________________________________
Flangeable valve blocks
Check valve pressure drop Ordering codes

(curves without section)
0 3 6 9 12 15 (US gpm)
40 Complete valve block, without coil
(psi) BPEN1(NC)-WC Y64S363001 On ports A, NC circuit, without
(bar)
480 manual emergency
30
BPEN2(NC)-WC Y64S363001 As previous, on port B
Pressure
360
BPEN3(NC)-WC Y64S363000 As previous, on ports A and B
rt
po
20
P⇒
Part #1: Valve kit

240
T TBPE 3XTAP822150 Valve blanking plug
rt⇒
10 po Normally closed circuit
120
BPEN(NC) 0EC08002032 Without manual emergency
0 0 BPEV(NC) 0EC08002037 With screw type emergency
0 10 20 30 40 50 60 (l/min) BPEP(NC) 0EC08002036 With pull-button emergency
Flow BPET(NC) 0EC08002038 With “pull & twist” emergency
Normally open circuit
BPEN(NA) 0EC08002031 Without manual emergency
BPEV(NA) 0EC08002034 With screw type emergency
BPEP(NA) 0EC08002033 With push-button emergency
BPET(NA) 0EC08002035 With “push & twist” emergency
Part #2: Block body kit
BPE3 5COR245950 Block body kit
Part #3: Coil
Valves needs type BER coil, see page 56.
Control description
8ES3B180
Control description
8ES3BLHC180
D1WWEB04E 53
SDE060
Counterbalance valves
Double acting valve Single acting valve

Z
48.5
1.91
48.5
1.91
26.5
1.04
26.5
1.04
Y
X
150 47 47 108
5.91 1.85 1.85 4.25
244 155
9.61 6.10
OVN OVN
A B A B
1.77
1.77
45
45
22.5
22.5
0.89
0.89
Z
Y
51 48 X 51 39
2.01 1.89 K 2.01 1.54 K
OVR Wrenches and tightening torque OVR OVV

X X = allen wrench 24 - 50 Nm (37 lbft) X X
Y = wrench 13 - 15 Nm (11 lbft)
W Z = allen wrench 4 W W
51.4 51.4 50
2.02 W = wrench 22 - 35 Nm (25.8 lbft) 2.02 1.97
OVN301 type OVR301 type OVR101 type OVR101 type OVV101 type
A B A B A B A B A B
Ordering codes OVN201 type OVR201 type OVV201 type
TYPE CODE DESCRIPTION A B A B A B

Single counterbalance valves
OVN101 1515322100 On port A, load sensitive, pilot ratio = 4
OVN201 1515322100 As previous, on ports B
OVR101 1515422100 On port A, relief compens., pilot ratio = 4
OVR201 1515422100 As previous, on ports B
OVV101 1515522100 On port A, vented type, pilot ratio = 4
OVV201 1515522100 As previous, on port B
Double counterbalance valves
OVN301 1555222100 Load sensitive, pilot ratio = 4
OVR301 1555322100 Relief compensated, pilot ratio = 4
Counterbalance valves pressure drop
0 3 6 9 12 15 (US gpm)
40
(psi)
(bar)
960
30
720
Pressure
port ⇒ T
20
480
P ⇒ port
10
240
Control description Control description
8ES3B180 8ES3BLHC180
0 0
0 10 20 30 40 50 60 (l/min)
Flow
54 D1WWEB04E
SDE060
______________________________________________________________________________________________
Outlet section
Without port arrangement With port arrangement
RF type RS - RP - RT types RSB - RPB - RTB types

drawing shows RS type drawing shows RS type
0.22
0.22
18 34
5.5
5.5
18 34 18 34
0.39
10
0.71 1.34 0.71 1.34 0.71 1.34

1.004
1.004
1.004
25.5
25.5
25.5
0.39
0.39
10
10
M8 - nr.2 holes M8 - nr.2 holes M8 - nr.2 holes
depth 10 - 0.39 depth 10 - 0.39 depth 10 - 0.39
X Y
P
P
2.76
T
2.76
2.76
70
27.5
70
70
0.67 1.08
1.02
26
T
17
70 35 18 70
0.55
14
2.76 1.38 0.71 2.76
70
2.76
Y = allen wrench 6 - 24 Nm (17.7 lbft)
RS-RSB types RP-RPB types RT-RTB types

P and T ports plugged P open, T plugged T open, P plugged
P P P
T T T
D1WWEB04E 55
SDE030-SDE060
Accessories__________________________________________________________________________________________________
Coils and connectors
Connectors
Application on Coil type Voltage Flying leads
Packard Packard
ISO4400 Deutsch DT AMP JPT (without
Weatherpack Metri-pack
connector)
10 VDC 4SLE001000A - - - - -
4SLE001201A(5)
4SLE001209A(3-4)
4SLE001200A 4SLE001203A(4)
12 VDC 4SLE001202A(5) 4SLE001210A(2) 4SLE001214A(2) 4SLE001207A
4SLE001217A(3) 4SLE001211A(3-4)
4SLE001216A(3-5)
4SLE001206A(2)
4SLE001400A(5)
Solenoid
14 VDC - 4SLE001401A(3-5) 4SLE001403A(3-4) - - -
operated
4SLE001402A(3-4)
unloading valve
BER 4SLE002400A 4SLE002401A(4)
Solenoid 24 VDC 4SLE002408A(3) 4SLE002407A(3-4) 4SLE002403A(4) - - 4SLE002404A
operated check 4SLE302400A(1) 4SLE002402A(5)
valve 28 VDC - 4SLE002802A(5) 4SLE002800A(4) - - -
4SLE004800A
48 VDC - - - - -
4SLE304800A(1)
4SLE011000A
110VDC - - - - -
4SLE311000A(1)
4SLE022000A
220 VDC - - - - -
4SLE322000A(1)
12VDC 4SL5000126A 4SL5000125A (5)
4SL5000129A (4)
- - -
Pressure BQP19
compensated 24VDC 4SL5000245A 4SL5000244A(5) 4SL5000248A(4) - - -
flow control 12VDC 4SLD001200A 4SLD001201A(5) 4SLD001202A(4) - - 4SLD001203A
valve BH
24VDC 4SLD002400A 4SLD002401A(5) 4SLD002402A(4) - - 4SLD002403A
10,5VDC 4SOL412011-C - - - - -
4SOL412013-C(5)
D12C 12VDC 4SOL412012-C 4SOL412014-C(4) - - 4SOL412019-C
4SOL412112-C(2)
24VDC 4SOL412024-C 4SOL412025-C (5)
4SOL412026-C (5)
- - -
Controls 4SOL515014-C 4SOL515019-C
12VDC 4SOL515012-C - - -
(3-5)
4SOL515020-C(3)
D15C 14VDC - - 4SOL515016A-C(4) - - -
4SOL515025-C
24VDC 4SOL515024-C (3-5) - - - -
Notes: (1) supply with AC and use only with rectifier connector - (2) with flying leads - (3) with bidirectional diode - (4) integrated perpendicular
type - (5) integrated parallel type
BQP19 type
ISO4400 connector DEUTSCH DT04 connector Features
Nominal voltage tolerance : ±10%
Power rating. . . . . . . . . . : 15 W @ 12 VDC
: 15 W @ 24 VDC
Max. operating current . . : 1.25 A @ 12 VDC
66.5
74.4
2.62
2.93
: 0.63 A @ 24VDC
54,5
2.13
54
Coil insulance. . . . . . . . . : Class H

22.5
0.89
22.5
0.89
(180°C - 356°F)
55 45
Weather protection. . . . . : IP65 - ISO4400
55 45
2.17 1.77 2.17 1.77 : IP69K - Deutsch DT
: IP65 - AMP JPT
AMP JPT connector Insertion . . . . . . . . . . . . : 100%
66.5
2.62
2.13
54
22.5
0.89
55 45
2.17 1.77
56 D1WWEB04E
SDE030-SDE060
_________________________________________________________________________________________________
Accessories

BH type
ISO4400 connector DEUTSCH DT04 connector Features
Nominal voltage tolerance . : ±10%
Power rating. . . . . . . . . . . : 33 W - 12/24 VDC
Max. oper. current (on/off). : 2.75 A - 12 VDC
: 1.38 A - 24 VDC
65.4
2.57
58.5
2.30
Max. prop. control current. : 1.7 A - 12 VDC

: 0.85 A - 24 VDC
0.75
0.75
19
19
Coil insulance. . . . . . . . . . : Class H

54.4 Ø 38 54.4 Ø 38 (180°C - 356°F)
2.14 Ø 1.50 2.14 Ø 1.50 Weather protection. . . . . . : IP65 - ISO4400
: IP69K -Deutsch DT
Flying leads : IP65 - AMP JPT
AMP JPT connector 12.20 Insertion . . . . . . . . . . . . . : 100%
310
0.39
10
58.5
2.30
45.5
1.79
0.75
0.75
19
19
54.4 Ø 38 54.4 Ø 38
2.14 Ø 1.50 2.14 Ø 1.50
BER type
Features
ISO4400 connector DEUTSCH DT04 connector
(perpendicular type)
Power rating. . . . . . . . . . : 19.2 W @ 10/12/24/48/
110/220 VDC
: 19 W @ 24/110/220 RAC
: 19.2 W @ 48 RAC
59.8
2.35
68
47.5
1.87

47.8
1.88
23.5
: 1.61 A @ 12 VDC
23.5
0.93
0.93
: 0.80 A @ 24 VDC
38.5 36 38.5 36 : 0.40 A @ 48 VDC
1.52 1.42 1.52 1.42 : 0.17 A @ 110 VDC
: 0.09 A @ 220 VDC
DEUTSCH DT04 connector AMP JPT connector : 0.89 A @ 24 RAC
(parallel type) : 0.45 A @ 48 RAC
: 0.19 A @ 110 RAC
: 0.09 A @ 220 RAC
Coil insulance. . . . . . . . . : Class H (180°C - 356°F)
69.8
2.75

63.9
2.52
47.8
: IP69K - Deutsch DT
47.5
1.88
1.87
23.5
23.5
0.93
0.93
: IP65 - AMP JPT

: IP67 - Weatherpack
38.5 36 38.5 36 : IP67 - Metri-pack
1.52 1.42 1.52 1.42 Insertion . . . . . . . . . . . . : 100%
Flying leads with Flying leads with PACKARD Flying leads with PACKARD
Flying leads DEUTSCH DT04 connector WEATHER-PACK connector METRI-PACK connector
200 150 150
7.87 5.91 5.91
11.81
300
8
47.8
1.88
23.5
0.93
38.5 36
1.52 1.42
D1WWEB04E 57
SDE030-SDE060
Accessories__________________________________________________________________________________________________

D12C type
DEUTSCH DT04 connector Features
ISO4400 connector Nominal voltage tolerance : ±10%
Power rating. . . . . . . . . . : 36 W @
. . . . . . . . . . . . . . . . . . .: 10.5/12/24 VDC
Max. operating current . . : 3.43 A @ 10.5 VDC
2.99
76
: 3 A @ 12 VDC
2.48
63
2.01
2.01
51
51
: 1.5 A @ 24VDC
22.5
22.5
0.89
0.89
Coil insulance. . . . . . . . . : Class H (180°C - 356°F)

50 35 50 35 : IP69K - Deutsch DT
1.97 1.38 1.97 1.38 : IP65 - AMP JPT
Insertion . . . . . . . . . . . . : 100%
Flying leads with
DEUTSCH DT04 connector
Flying leads
340
13.39
AMP JPT connector
12.20
310
2.68
68
2.01
2.01
51
51
22.5
22.5
0.89
0.89
50 35 50 35
1.97 1.38 1.97 1.38
D15C type
Features
ISO4400 connector DEUTSCH DT04 connector
Power rating. . . . . . . . . . : 38 W @
12/14/24/ VDC
66.5
2.62
65.5
2.58
: 2.75 A @ 14VDC
52.5
2.07
: 1.58 A @ 24VDC
22.5
22.5
0.89
0.89
Coil insulance. . . . . . . . . : Class H

(180°C - 356°F)
54.2 Ø45 54.2 Ø45 Weather protection. . . . . : IP65 - ISO4400
2.13 Ø1.77 2.13 Ø1.77 : IP69K - Deutsch DT
: IP65 - AMP JPT
Flying leads Insertion . . . . . . . . . . . . : 100%
300
11.81
AMP JPT connector
66.5
2.62
53.5
2.11
22.5
22.5
0.89
0.89
54.2 Ø45 54.2 Ø45

2.13 Ø1.77 2.13 Ø1.77
58 D1WWEB04E
SDE030-SDE060
_________________________________________________________________________________________________
Accessories
Fixing brackets
SDE030
Dimensions (*) are referred to directional valve with N1 type inlet section.
3.90*
99*
1.14
29
0.098
2.5
9
0.37
9.5
0.35
0.24
6
1.34
2.56
34
65
21,5
8 G
0.31
H
with section N type with sections N1-N2-N6-N7 type

TYPE G H G H
mm in mm in mm in mm in
SDE030/1 134 5.28 150 5.91 171 6.73 187 7.36
SDE030/2 171 6.73 187 7.36 208 8.19 224 8.82
SDE030/3 208 8.19 224 8.82 245 9.65 261 10.28
SDE030/4 245 9.65 261 10.28 282 11.10 298 11.73
SDE030/5 282 11.10 298 11.73 319 12.56 335 13.19
SDE030/6 319 12.56 335 13.19 356 14.02 372 14.65
SDE030/7 356 14.02 372 14.65 393 15.47 409 16.10
SDE030/8 393 15.47 409 16.10 430 16.93 446 17.56
SDE030/9 430 16.93 446 17.56 467 18.39 483 19.02
SDE030/10 467 18.39 483 19.02 504 19.84 520 20.47
D1WWEB04E 59
SDE030-SDE060
Accessories__________________________________________________________________________________________________
Fixing brackets
SDE060
Dimensions (*) are referred to directional valve with N1 type inlet section.
On valve for 60 l/min (15.8 US gpm) flow rate On valve for 30 l/min (7.9 US gpm) flow rate
3.90*
99*
1.14
29
0.098
9
2.5
0.37
9.5
0.24 0.35
6
2.56
1.34
65
34
21.5
0.85
G 8 G
0.31
H H
Valve for 60 l/min (15.8 US gpm) flow rate
with section N type with section N1 type with section N2 type

TYPE
G H G H G H
mm in mm in mm in mm in mm in mm in
SDE060/1 147.5 5.81 163.5 6.44 169.5 6.67 185.5 7.30 200 7.87 216 8.50
SDE060/2 193.5 7.62 209.5 8.25 215.5 8.48 231.5 9.11 246 9.69 262 10.31
SDE060/3 239.5 9.43 255.5 10.06 261.5 10.29 277.5 10.93 292 11.50 308 12.13
SDE060/4 285.5 11.24 301.5 11.87 307.5 12.11 323.5 12.74 338 13.31 354 13.94
SDE060/5 331.5 13.05 347.5 13.68 353.5 13.92 369.5 14.55 384 15.12 400 15.75
SDE060/6 377.5 14.86 393.5 15.49 399.5 15.73 415.5 16.36 430 16.93 446 17.56
SDE060/7 423.5 16.67 442.5 17.42 445.5 17.54 461.5 18.17 476 18.74 492 19.37
SDE060/8 469.5 18.48 485.5 19.11 491.5 19.35 507.5 19.98 522 20.55 538 21.18
SDE060/9 515.5 20.30 531.5 20.93 537.5 21.16 553.5 21.79 568 22.36 584 22.99
SDE060/10 561.5 22.11 577.5 22.74 583.5 22.97 599.5 23.60 614 24.17 630 24.80
Valve for 30 l/min (7.9 US gpm) flow rate
with section NB type with section N1B type with section N2B type with sections N6B-N7B type
TYPE
G H G H G H G H
mm in mm in mm in mm in mm in mm in mm in mm in
SDE060/1 143 5.63 159 6.26 164.5 6.48 180.5 7.11 191 7.52 207 8.15 183.5 7.22 199.5 7.85
SDE060/2 189 7.44 205 8.07 210.5 8.29 226.5 8.92 237 9.33 253 9.96 229.5 9.04 245.5 9.66
SDE060/3 235 9.25 251 9.88 256.5 10.10 272.5 10.73 283 11.14 299 11.77 275.5 10.85 291.5 11.48
SDE060/4 281 11.06 297 11.69 302.5 11.91 318.5 12.54 329 12.95 345 13.58 321.5 12.66 337.5 13.29
SDE060/5 327 12.87 343 13.50 348.5 13.72 364.5 14.35 375 14.76 391 15.39 367.5 14.47 383.5 15.10
SDE060/6 373 14.69 389 15.31 394.5 15.53 410.5 16.16 421 16.57 437 17.20 413.5 16.28 429.5 16.91
SDE060/7 419 16.50 435 17.13 440.5 17.34 456.5 17.97 467 18.39 483 19.02 459.5 18.09 475.5 18.72
SDE060/8 465 18.31 481 18.94 486.5 19.15 502.5 19.78 513 20.20 529 20.83 505.5 19.90 521.5 20.53
SDE060/9 511 20.12 527 20.75 532.5 20.96 548.5 21.59 559 22.01 575 22.64 551.5 21.71 567.5 22.34
SDE060/10 557 21.93 573 22.56 578.5 22.76 594.5 23.41 605 23.82 621 24.45 597.5 23.52 613.5 24.15
60 D1WWEB04E
_________________________________________________________________________
Installation and maintenance
The SDE060-SDE030 valves are assembled and tested as per the technical specifications of this catalogue.
Before the final installation on your equipment, kindly follow the recommendations below:
- the valves can be assembled in any position; in order to prevent body deformation and spool sticking, mount the products
on a flat surface;
- In order to prevent the possibility of water entering into the spool control kit, do not use high pressure wash down directly
on the valves;
- Before painting, ensure plastic port plugs are tightly in their place.
A2
A1 B2
Fittings tightening torque (Nm-lbft) B1
SDE030 SDE030
THREAD TYPE P-T ports A-B ports M-LS ports
BSP G 3/8 G 3/8 G 1/4
With O-Ring seal 35 - 25.8 35 - 25.8 25 - 18.4
LS
With copper washer 40 - 29.5 40 - 29.5 30 - 22 T
With steel and

30 - 22 30 - 22 16 - 11.8 M
rubber washer P
3/4-16 9/16-18 7/16-20(SAE 4)
UN-UNF
(SAE 8) (SAE 6) 9/16-18 (SAE 6)**
With O-Ring seal 35 - 25.8 30 - 22 18-13.3 • 30**-22**
A2
A2
B2 A1 B2
A1
SDE060 SDE060 B1
B1
30 l/min (7.9 US gpm) 60 l/min (15.8 US gpm)
T
T
LS LS
P P
M M
SDE060
Section for 30 l/min (7.9 US gpm) Section for 60 l/min (15.8 US gpm)
THREAD TYPE
P-T ports A-B ports M-LS ports P-T ports A-B ports M-LS ports
BSP G 3/8 G 3/8 G 1/4 G 1/2 G 3/8 • G 1/2* G 1/4
With O-Ring seal 35 - 25.8 35 - 25.8 25 - 18.4 50 - 37 35-25.8 • 50*-37* 25 - 18.4
With copper washer 40 - 29.5 40 - 29.5 30 - 22 60 - 44.3 40-29.5 • 60*-44.3* 30 - 22
With steel and
30 - 22 30 - 22 16 - 11.8 60 - 44.3 30-22 • 60*-44.3* 16 - 11.8
rubber washer
3/4-16 9/16-18 7/16-20(SAE 4) 3/4-16 9/16-18 (SAE 6) 7/16-20 (SAE 4)
UN-UNF
(SAE 8) (SAE 6) 9/16-18 (SAE 6)** (SAE 8) 3/4-16 (SAE 8)** 9/16-18 (SAE 6)**
With O-Ring seal 35 - 25.8 30 - 22 18-13.3 • 30**-22** 35 - 25.8 30-22 • 35**-25.8** 18-13.3 • 30**-22**
NOTE – These torques are recommended. Assembly tightening torque depends on many factors, including lubrication, coating
and surface finishing. The manufacturer must be consulted.
D1WWEB04E 61
SDE030-SDE060
Installation and maintenance_________________________________________________________________________
Malfunction Cause Remedy

Control spool seal due to mechanical
External leakage from electric control Replace the seal.
wear.
Excessive internal leakage on A and B Increase clearance between spools and Replace the directional control valve and
ports. body due to high wear. check the oil contamination level.
Remove, clean or replace the main relief
Main pressure relief valve blocked open.
valve.
Inability to build pressure on A and B Remove, clean or replace the port relief
Port relief valve open.
valve.
Low pump pressure and flow. Check the pump and the circuit.
62 D1WWEB04E
D1WWEB04E 63
4th edition March 2017 WWW.WALVOIL.COM
D1WWEB04E

Walvoil

Uploaded by

Copyright:

Available Formats

Walvoil

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Walvoil

Uploaded by

Copyright:

Available Formats

What are directional control valves used for?

What are directional control valves used for?

What components make up a directional control valve?

What components make up a directional control valve?

SDE030

WALVOIL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY AN

outlet port T 210 bar - 3050 psi

operating range from 15 to 75 mm2/s - from 15 to 75 cSt

Viscosity min. 12 mm2s - 12 cSt

max. 400 mm2s - 400 cSt

Max. contamination level -/19/16 - ISO 4406 - NAS 1638 - class 10

Standard threads _________________________________________________________________________________________

ISO 228/1 ISO 263

ISO 1179 11926

PORT SDE030 SDE060

BSP UN-UNF BSP UN-UNF BSP UN-UNF

Working ports G 3/8 9/16-18 (SAE 6)

Complete section ordering codes_____________________________________________________________________

SDE030/4/ AN1(JNG3-120)ELN / Q-18ES3B / Q-18ES3B / QL-18ES3B /

Nr. of working sections 1 2 2 2

QBPE-18ES3B.BPEN(NC)3 / RF - ...... - 12VDC

1 Complete inlet section * page 10 3 Complete outlet section* page 25

NOTE (*) – Codes are referred to BSP thread.

Inlet section: part ordering codes____________________________________________________________________

Valve setting (bar) Without coil

Valve setting (bar) Without coil Valve setting (bar)

NOTE (*) – Codes are referred to BSP thread.

Inlet section: dimension and hydraulic circuit____________________________________________________

AN type AN type ANP type ANT type ANS type

14 Wrenches and tightening torque

0.55 1.61 X = allen wrench 6 - 24 Nm (17.7 lbft)

AN1 inlet sections

AN1 type with P and T ports open AN1 types

1.34 0.71 1.35 depth 10 - 0.39

AN2 inlet sections

AN2 type with P and T ports open AN2 types

Wrenches and tightening torque

Inlet section: dimension and hydraulic circuit____________________________________________________

AN6-AN7 inlet sections

AN6 type; configuration for Open and Closed Center

NOTE: for valve wrench and torque see

AN6 type AN6 type AN7 type

Main relief valve

For sections AN1 and AN2 type

For sections AN6 and AN7 type

Setting range: VMP02TV type Setting range: VMP02TS type

Setting range: VMP02TR type

Inlet section: options____________________________________________________________________________________

For sections AN1 and AN2 type

Manual emergency actuation types Pressure drop diagram

ELP ELV ELT 2 30

Pressure compensated flow control valve

For section AN2 type

Manual operated Solenoid operated

Pressure compensated flow control valve

For sections AN6-AN7 type

Flow regulation diagram Flow vs. Pressure diagram

For sections AN6-AN7 type