MACHINE CONTROLLER

MP2000 SERIES

Certified for
ISO9001 and
ISO14001

JQA-0422 JQA-EM0202
 Optimizes Configuration of
The MP2000 Series Machine Controller has been Motion Control System
developed to optimize control of machines. Optimal Positioning P16

It has surpassed the top achievements of

Optimizes System Configuration
PLCs and user-developed controllers
to offer ideal motion control.
Highly Expandable P14

Easily Programs Sophisticated Controls

High Operability P8

Enables Ideal Machine Motion and Synchronization

High-level Synchronization P6

Reduces System Tact Time

High-speed Multi-axis Control P4

Machine Controller and PLC (Programmable Logic Controller) : How do They Differ ?

PLC Machine Controller MP2000

Series

I/O I/O I/O Servomotor Controller Servomotor Servomotor Servomotor Inverter I/O
Bulk of the work Part of the work Bulk of the work Part of the work

Excellent at controlling I/O. Ideal for controlling machines and devices.

Focuses more on connectability to various Focuses on precise synchronous and high-speed control on multiple motors.
I/O devices than axes synchronization. The optimal controller models can be selected based on the device
Most are modules. requirements.

The MP2000 Series Brings a Cornucopia of Solutions The MP2000 Series Fully Supports Various Applications

Gantry Mechanism and Alignment Stage Mechanism

These mechanisms comprise the basic system used in devices for the manufacturing and
the inspection of semi-conductor chips, LCDs, and other components. High precision as
well as high acceleration and deceleration are required for these processes. Two axes must
be synchronized to control and operate the gantry mechanism.
Advantage Achieves complete synchronous multi-axis control and online adjustment.

Solution for Conveyance

Provides a solution for the control mechanism that allows workpieces to be processed
in accordance with the speed of the production line.
Advantage Allows the slave axes to follow master axis operation when the inverter is used as the
master axis and both the inverter and servo drives are connected through a network.

Solution for Winder

Provides a solution for the control mechanism where a winder winds and a feeder unwinds.
Advantage Achieves high-precision winding, feeding, dancer control, and tension
control with standard servo drives and inverters. Line control can be
constructed easily with user functions set in advance.
2
 MP2000 Series Machine Controller

MP2000 Series Machine Controller : The Ideal Machine Control Tool

Various types of controllers are available to meet the needs of your machines. PLCs in general are
usually in a modular form, but Yaskawa’s MP2000 Series Machine Controllers come in a variety of forms,
including board type and panel type. This allows you to select the ideal controller for your system.

Board Type Machine Controller

CONTENTS
MP2100
▶Perfect for machines connected to a personal computer
・ No additional power supply is required as it can be installed on a High-speed Multi-axis Control 4
personal computer.
High-level Synchronization 6
・ Runs on the same applications as others in the MP 2000 Series

Features
Board Type ・ Motion APIs enable coordination with your personal computer. High Operability 8

Module Type Machine Controller Highly Expandable 14

MP2200 Optimal Positioning 16
▶ The ideal machine controller for large-scale systems
A Variety of Support Tools 18
requiring sophisticated multi- axis controls and
reduction of tact time MP2100(M), MP2101(M), MP2101T(M) 20
・ The flagship of high - performance MP 2000 Series
Machine Controllers MP2200 22

Series Features
・ Synchronous control of up to 256 axes
・ As many as 35 slots can be added for option modules.
Module Type MP2300, MP2310, MP2300S 24

All-in-one Type Machine Controller MP2400 25

MP2300/MP2310/MP2300S MP2500/M/B/MB 26
▶ The optimal controller for systems requiring high
More about the MP2000 Series 28
cost performance for various simple motion
Related Information

controls, from positioning and interpolation to Related Products 29

sophisticated multi-axis control.
・ The power supply, CPU, 16-axis motion control function, Third-party MECHATROLINK-compliant Devices 31
and network (Ethernet communications for MP2310 and
MP2300S) are all integrated. Other Modules / Terminals 33
・ Slots for optional modules allow the expansion of I/Os and
network systems. Reconfiguring Systems with the MP2000 34
All-in-one Type ・ Up to 64 axes can be controlled.
System Configurations 36
Specifications

Compact Unit Type Machine Controller Hardware Specifications 40

MP2400 Software Specifications 65
▶ The optimal machine controller for small-scale systems for simple
motion controls such as positioning and interpolation AC Servo Drives 71
・ The power supply, CPU, 16-axis motion control function, and Ethernet
Ordering Reference 75
communications are all integrated.
・ A stand-alone system that reduces space and wiring requirements can Quick Reference 81
be constructed. Compact
Unit Type
Panel Type Machine Controller Read Before Ordering 88

MP2500 Full Support 89

▶ The perfect machine controller for systems that need to
be compact but must also provide plenty of data
・ Runs on the same application programs as others in the MP2000
Series
・ The HMI and personal computer functions are all integrated in this
all-in-one controller.
Panel Type
3
 Reduces System Tact Time

High-speed Multi-axis Control

Maximizes Speed with

Accurate Motion Control
High speed processing and network communications are vital to maximizing the output of intricate systems.
The high-speed CPU of the MP2000 Series reduces the execution time needed for commands.
Better yet, with the MECHATROLINK- motion network (transmission speed: 10 Mbps) and
MECHATROLINK- (transmission speed: 100 Mbps) used in the MP2000 Series, high-accuracy and
high-speed motion control on multiple axes is realized.

Highest-speed Machine Controller on thee Market

Maa
M
Integration of the open motion network MECHATROLINK-
enables high-speed motion control. (When the SVC-01
motion control module is installed.)

Linear Direct-drive
Series Series

MECHATROLINK-
MECHATROLINK-
Maximum Transmission Transmission Cycles
Transmission Transmission Cycles
transmission Speed (Number of Connected Stations) Speed (Number of Connected Stations)
cycles 0.5 ms (4 stations) 125 μs (4 stations)
1.0 ms (9 stations)
125 μs 10 Mbps
1.5 ms (15 stations) 100 Mbps
250 μs (8 stations)

2.0 ms (16 stations)*1 500 μs (14 stations)

1.0 ms (16 stations)*1

*1 : The maximum number of stations, including I/O, is 21.

A Variety of Controller Models with up to 256-axis Synchronous Control Maximum

The optimal system configuration can be selected from a variety of controllers, including module, all-in-one,
compact unit, board, and panel-integrated models. Servo drives for up to 256 axes can be synchronously controlled.
256 axes
Compact Unit Panel-integrated Type,
Module Type All-in-one Type Type Board Type Panel-separated Type

MP2100， MP2100M， MP2500， MP2500M，

MP2200 MP2300 MP2310 MP2300S MP2400
MP2101(T) MP2101(T)M MP2500B MP2500MB
Max. Number
of Axes 256 axes 48 axes*2 64 axes*2 32 axes*2 16 axes 16 axes 32 axes 16 axes 32 axes

CPU CPU selection*3 Integrated CPU Built-in CPU

*23 :: Can
The number of axes refers to the number of servomotor control axes that can be connected to MECHATROLINK- .

4 * be selected from CPU-01, -02, -03, and -04.

 MP2000 Series Machine Controller

High-speed Multi-axis Control High-level Synchronization High Operability Highly Expandable Optimal Positioning

Four Different Control Modes to Select from. They can be Switched

between while On-line, and for Each Transmission Cycle
A MECHATROLINK motion network
All-in-one Four Control Modes
is used with the MP2000 Series
Machine Controller for control of an Synchronous Phase Control Torque Control
adaptive and highly precise servo

High-speed Multi-axis Control

Speed control with position compensation Generates a constant torque, regardless of
drive. (electronic shaft) or position control with 100% speed.
In addition to torque, position, speed feed forward (electronic cam). Multi-axis When T1=T2
※PC側モーション制御の場合は、対応不可。
servomotors can be controlled synchronously. Torque
and speed control modes, the T1
MECHATROLINK network also Load Time
supports phase control mode, Torque
T2
which delivers particularly high
Time
accuracy. Motor
Speed
The various control modes can
0.3mm dia. mechanical pencil lead does not break. Time
be switched on-the-fly for perfect
control of even the most complex
applications. Position Control Speed Control
Advances to the target position, and stops or Turns the motor at the specified speed, with
holds. user-defined acceleration/deceleration slopes.
V Speed V
V Speed at Movement V
S-curve
Accel/decel.
Linear
Accel/decel.
t t
Accel. Time t1 Decel. Time t2 Accel. Time t1 Decel. Time t2

Online Switching Control Modes

Applications
V Synchronous phase control Injection molding machine: From speed control to torque control
while increasing speed with
different accel rates Packaging machine: From synchronous phase control to position
control
Changes accel rate
during acceleration
Switches to torque control during
synchronous phase control

Synchronous Torque Position

Speed Control Phase Control Control Control
t
Switches to synchronous phase Switches to position control
control during speed control during torque control

Interpolation Functions for Simple Programming

Commands for linear, circular,
Linear Interpolation, Circular Interpolation Helical Interpolation
and helical interpolation are Basic motions, such as rapid traverse positioning, Helical interpolation can be programmed to
available for easy programming linear interpolation, and circular interpolation, can combine linear and circular interpolation (Fig. A).
of machine motions. be easily programmed. Helical interpolation can also be used by applying
linear interpolation portion to the rotary axis to
trace an arc using normal line control (Fig. B).
Circular
interpolation Linear interpolation

Positioning
(Up to 16 axes)
Circular
interpolation
(Up to 2 axes) R
R
Linear interpolation
(Up to 16 axes) Fig. A Helical Interpolation Fig. B Normal Line Control
5
 Enables Ideal Machine Motion and Synchronization

High-level Synchronization

Perfect Synchronization
can Deliver Perfect Operations
Excellent synchronization of the controller is important in applications
that require synchronous control on multiple axes.
The MP2000 Series can meet such requirements in various applications
and remarkably improve machine precision.

MP2000 Series for Complete Perfect Synchronization

Synchronous Control with No Delay
through a Network General controllers are designed mainly to control I/Os, whereas
machine controllers are developed as an ideal tool to control
systems. All functions required for motion control are designed
to operate with no delay, enabling perfect synchronization.
General Controllers MP2000 Series Machine Controller
No scan delay
I/O,
CPU Motion CPU I/O,
communications,
module CPU module communications, etc.
etc.

Perfect synchronization
In addition to synchronous control on 32 axes using Ladder Motion of PCI buses with
servo communications
an SVA -01 analog motion control module, the
for servo drives
MP 2000 Series is capable of synchronous control I/O control is
between SVB-01 and SVC-01 modules. the main feature.
Ladder
Because of such high - level synchronization, the Motion control is
optional.
MP 2000 Series can be used for fully synchronous Motion
control of servo drives up to 256 axes ( MP 2200 ) Executed by
connected by MECHATROLINK - or and thus, only one CPU
opens another field of applications.

Synchronized Processing of Sequence and Motion Controls

The MP2000 Series Machine
Sequence Control Motion Control
Controller precisely synchronizes
motion with high-speed PLC Ladder program (High-speed scan) 《Relay sequence》 Controls the motions Synchro-
in synchronization with nous
scanning. The motion control control
high-speed scanning.
starts within 1 scan from the start
Servo parameters

signal. Torque
control
Also, the MP2000 Series Machine
Controller can control different Position
Motion Program control
motions at the same time. VEL[X]2000 [Y]2000
The MP2000 Series Machine ACC[X]100 [Y]100
DCC[X]100 [Y]100 Speed
s high-speed performance
Controller’ MOV[X]0 [Y]0 control
Servo parameter
helps reduce tact time. Startup of motion program MVS[X]100.0[Y]200.0 F30000
settings

The servo parameters can be set

Reduction of tact time
Simultaneous execution of from the motion program or from
different motion programs the ladder program for high-speed
(16 programs max.) motion control.

6
 MP2000 Series Machine Controller

High-speed Multi-axis Control High-level Synchronization High Operability Highly Expandable Optimal Positioning

Electronic Shaft and Electronic Cam for Simplified Mechanics

With the MP 2000 Series Machine Controller, Electronic Shaft and Electronic Cam for Synchronous Phase Control
AC servo drives that are connected to
Driver
MECHATROLINK -   or can directly control each Motor for Line Shaft Drive Line Shaft

axis of a machine. Controller

Gear

Phase adjustment of each slave axis can be Clutch

Phase Matching
accomplished electrically on-the-fly, eliminating Differential
Gear
Change
Gear
the need for mechanical adjustment. This Cam

High-level Synchronization
Motor
simplification of the mechanical system results in
reduced wear and reduced time spent on
maintenance, setup, and part replacement.

SERVOPACK

Application
Example

Film feeder

Conveyor

Sealing Cutting and sealing

Easy Creation of Electronic Cam Data

Cam Data Generation for Easy Programming (integrated in MPE720)

Cam curve definition

Define a formula for each cam segment. There is a maximum of
20 segments possible and 25 formulas from which to choose.

Execution with MP2000 Series Machine Controller

The data list is processed in the MP2000
Series Machine Controller.
Motions of the machine can be viewed and
adjusted with the following graphs.
Cam graph (displacement)
Control graph
(displacement, speed, acceleration, and jerk)
Feature 1 Feature 2
Flexible resolution settings Select from among 25 different cam curves
Resolution can be set for each A variety of cam curves have been prepared to express complicated
block. High-precision cam curves machine motions. Fine adjustments can be made for each data point.
can be created because resolution Straight line Parabolic Simple harmonic Cycloid Modified trapezoid
can be determined according to Modified sine Modified constant velocity Trapecloid Single-dwell cycloid m=1
the complexity of the curve. Single-dwell cycloid m=2/3 Single-dwell modified trapezoid m=1
Single-dwell modified trapezoid m=2/3 Single-dwell ferguson trapezoid
Single-dwell modified sine Single-dwell trapecloid No-dwell modified trapezoid
No-dwell modified constant velocity NC2 curve Asymmetrical cycloid
Asymmetrical modified trapezoid No-dwell simple harmonic Free-form curve
Inverted trapecloid Paired strings Inverted paired strings 7
 Easily Programs Sophisticated Controls

High Operability

Optimum Engineering Tools

MPE720 Ver.6
for Motion Control & Integrated Engineering Tool MS Windows 7
Dramatic Increases in Efficiency Compatible

Easy Programming for Motion Control

Motion Programs Ladder Programs
Use only one command for interpolated motion. With Windows-based operations, anyone can create
Programming is easy with a text -based language. or edit ladder programs.

Easy Motion Program for Positioning and Interpolation Control

Use an easy text-based programming language for complicated motion control.

Easy Programming for Interpolation Command Input Assistant Variety of Debugging Functions
A wide variety of commands is available, With the command input assistant, you Functions, such as step-by-step program
so sophisticated interpolation can be can create a program without special execution and breakpoint setting, are
programmed with only one command. knowledge of the syntax. provided to simplify debugging.
Commands Functions
MOV Positioning
MVS Linear interpolation
Circular interpolation, Helical circular
MCW
interpolation (clockwise)
Circular interpolation, Helical circular
MCC
interpolation (counterclockwise)
ZRN Zero-point return

BASIC-like Commands or Language Variables (register) and Arrays

as Parameters
Control commands such as IF and WHILE as well as the user function call (UFC) can be used.
Indirect assignment with variables or
A comment can be inserted using The repeat command (WHILE) and arrays (subscripts i and j) can be used
slashes ( // ) or quotation marks “
( ”). branching command (IF… ELSE) can for parameters.
be used.

Complex arithmetic expressions can be written.

8
 MP2000 Series Machine Controller

High-speed Multi-axis Control High-level Synchronization High Operability Highly Expandable Optimal Positioning

Complex Arithmetics Easily Added

Arithmetic expressions for the complex calculations required for motion control can be easily and
directly written into ladder programs.

C Language-like for Programming Arithmetics

Complex arithmetic operations can be Arithmetic expressions written with the Up to 100 calculations can be written with
easily written as expressions in C syntax. text editor can be inserted as comments one expression and the resulting values
using C syntax. can be viewed on the ladder monitor.

High Operability
Simple Setup and Rich Variety of Monitoring Functions
Provides more effective engineering for motion control.

Axis Setup Wizard Easy Adjust Servo Trace Motions &

Monitor Axis Status
You can easily make settings for the servo A PC no longer has to be connected to Monitoring functions include various
axes following the interactive guide. each servo drive. All servo drives connected enhanced tracing functions to view the
to the controller on the MECHATROLINK motion control status and a list of all
network can be adjusted on one PC running connected servo drives to view their
SigmaWin+, a tool specially designed to status in one glance.
adjust servo systems.

Axis Setup Wizard Servo System Left: Trace Data in Trend Graph
Adjustment Right: Trace Data in X-Y Graph
Tool
Axis Monitor

Program Management and Database for Efficient Program Design

Hierarchy Programming Variable Database
Ladder programs are organized in three hierarchical Each register (address + comment) is given with a variable name
levels. The programs are grouped according to the and identified by name in programs. Two types of variables are
type of process for easy identification of the structure. used: system setting variables prepared with MPE720 version 6
There are three types of program processes: start, and user setting variables freely set by the user.
high-speed scan, and low-speed scan. Programs can All variables are consolidated in the variable database of the
be duplicated by copying and pasting between MPE720 version 6 so that they can be shared between different
different project files (MPE720 version 6 work files) for project files.
efficient and standardized programming.

First Tier
Second Tier
Third Tier

Drag and drop a variable onto

the object.
9
 Easily Programs Sophisticated Controls

High Operability

Supports Embedded C Language Application Programming (Optional)

Applications can be programmed in the widely portable C language, so existing software assets can be used. Confidential
company information will not be leaked to a third party, because only object codes are loaded in C language.

No Additional Hardware Required

The embedded C language application is compatible with all standard products in the MP 2000 Series. Though the
runtime license is provided free of charge, the application development environment must be provided by the
customer. MULTI integrated development environment and embedded API must be prepared by the customer.

C Language Application Development Environment

③MPE720
 Integrated engineering tool
Required Application Development Environment
①C language compiler : MULTI
②API: Embedded API
①MULTI ③Engineering tool: MPE720
  Integrated development environment
 (Must be provided by the customer) Downloading object files that
Ethernet/General-purpose serial interface have already been located.

Serial interface dedicated to debugging

②Embedded API
Standard products
 (Must be provided by the customer) in the MP2000 Series
Note: Required development environment must be provided by the customer. The embedded API and MPE720 are available from Yaskawa Electric. For inquiries
about MULTI (the integrated development environment), contact Advanced Data Controls Corp. For details, visit their website at http://www.adac.co.jp/.
Yaskawa’
s technical support is required to develop applications using C language. Contact your Yaskawa salesperson or other Yaskawa representatives.

Compatibility with both Ladder Programs and Motion Programs

Ladder, motion, and C - language
programs can be executed from the
Ladder Motion
same CPU, enabling a smooth operation
that doesn ’ t depend on a single
External signals
programming language.
● C - language tasks are executed
independently from ladder programs.
● C - language programs can co - exist
with ladder and motion programs.
● Synchronous operations with ladder Table data Register
Calling functions
programs and motion programs are
also possible. Accessible by ladder Accessible from
Wake up task / Interrupt task ladder, motion, and
● C-language functions can be called RTOS language and C language
C language
C-language functions
f r o m l a d d e r p r o g r a m s , m oti o n
Calling functions
programs, and C-language tasks.
Global variables
C-language task
Accessible only with C language
Wake up task / Interrupt task

C-language task
Making tasks dormant

Automatic task wakeup with high and low cycles

10
 MP2000 Series Machine Controller

High-speed Multi-axis Control High-level Synchronization High Operability Highly Expandable Optimal Positioning

Can Adjust and Maintain All Drive Devices for the System
Setups, adjustments, programming, and maintenance of all drives connected to the network can
be executed on a single personal computer screen.

MPE720 Version 6 Integrated Engineering Tool

MPE 720 ver. 6 connected to machine controllers in the MP 2000 Series allows you to adjust and maintain all
AC servo drives and inverters connected to a network. Without the need to connect and disconnect a personal
computer to each drive, adjustment and maintenance is now simple and efficient.
MPE720 Ver.6

High Operability
Integrated Engineering Tool

Ethernet

MPE720

MECHATROLINK-

SimaWin+ DriveWizard Plus

AC Servo Drive Inverter Support Tool

Engineering Tool DriveWizard Plus
SigmaWin+

11
 Easily Programs Sophisticated Controls

High Operability
MPE720

The All-in-one Engineering Tool SimaWin+ DriveWizard Plus

The AC servo drive engineering tool SigmaWin+ and inverter support
tool DriveWizard Plus have been combined into one package, the
integrated engineering tool MPE720 version 6.

MPE720 Version 6
Integrated Engineering Tool

AC Servo Drive Engineering Tool

SigmaWin+

Inverter Support Tool

DriveWizard Plus

SigmaWin+, Simple Startup and Maintenance with AC Servo Drive Engineering Tool
SigmaWin+ is an engineering tool that can set up, adjust, and maintain all servo drives in the  series. With this tool,
setup and troubleshooting time can be slashed back.

Shorter Setup Time Easy Tuning

● Setup wizard function Drives can be easily adjusted by simply following the
Parameters can be set flow of the tunings.
by simply following the
directions of the setup
wizard and entering the
conditions in the formats.

● Wiring confirmation
  function
SigmaWin+ has a function
to check SERVOPACK I/O
signals transmitted to and
from host controllers and
peripheral devices.
Troubleshooting Support
When an alarm is activated,
● Tracing function the alarm diagnostic
SigmaWin + can trace up to function will display the
three items, and can be made cause of the problem and
to display the tracing data by suggest how to respond to
setting a trigger condition. it.
Continuous tracing is possible
for extended hours.

12
 MP2000 Series Machine Controller

High-speed Multi-axis Control High-level Synchronization High Operability Highly Expandable Optimal Positioning

DriveWizard Plus, the Powerful Support Tool for Inverters

DriveWizard Plus is a software application that provides support in parameter setups and trial operations for
inverters.

Easy Maintenance
・ DriveWizard Plus provides various functions, such
as monitoring, parameter editing, pattern
operation, and an oscilloscope function. These
functions mean that adjustment and maintenance
of inverters is simplified.

High Operability
・ All parameter data from the inverters can be
consolidated and managed with a personal computer.

Oscilloscope Function

・ DriveWizard Plus has a drive

changeover function that can
automatically convert the
Former Models A1000
parameters for one inverter to the
parameters for the inverter
replacing it. This helps save time
when upgrading or replacing a
malfunctioning inverter. Automatic Conversion

Varispeed F7

DriveWizard Plus

Varispeed F7S

13
 Optimizes System Configuration

Highly Expandable

Construct the Optimal System

for Your Needs

Common Applications are Used for All MP2000 Series Machine Controllers
Need More I/Os for Your Connections with the MP2300S?
Personal computer
Change to the MP2200 system. All applications can be MPE720 (optional) application software
Solution
used for the MP2200. MP2101T
programming software
Motion API
Need to Construct a Personal Computer Based System
after Adopting the MP2310? Windows NT/ 2000/XP
Personal Computer (General-purpose OS)
Change to the MP2100 system. The same applications (PC)

Solution can be used. An API must be added to use the system

with a personal computer. PCI bus

MP2101T application
program
Data MP2101T
Ladder Motion (register) Ladder Motion registers
program program program program
MP2200
MP2101T
MP2300
I/O data I/O data
Motion control system Motion control system

Program
Conversion
MECHATROLINK- / MECHATROLINK- /

14
 MP2000 Series Machine Controller

High-speed Multi-axis Control High-level Synchronization High Operability Highly Expandable Optimal Positioning

Common Optional Modules Used for all MP2000 Series Machine Controllers*
The best optional modules for your device and system size can be selected.
* : Excluding MP2400
MP2200，MP2300，MP2310，MP2300S

MP2100M，MP2101M，MP2101TM MP2500

Highly Expandable
MP2500ME
Expansion rack*

MP2200 base unit * : 3Antoexpansion rack enables use of

24 optional modules.
(3 racks possible)
EXIOIF MP2100M, + MP2100MEX
cable MP2101M,
MP2500B-OP/MP2500MB-OP
MP2101TM Optional Modules
Communication Modules
I/O Modules
Motion Control Modules

Supports Various Open Networks

A variety of optional modules are available to support the networks your system uses.

Host PLC Controller Network

Supported open networks
Controller Network FL-net
EtherNet/IP
MP2000 Series
Ethernet
RS-232C，RS-422/485

Field Network
Supported open networks
DeviceNet
Field Network
PROFIBUS
CC-LINK (By Anywire Corporation)
CompoNet
EtherCAT

Supported closed networks

MP-LINK
Motion Network (MECHATROLINK- / ) (Real-time network developed by Yaskawa)
A-net/A-Link
(By Algo System Co., Ltd.)
AnyWire-DB
(By Anywire Corporation)

15
 Optimizes Configuration of Motion Control System

Optimal Positioning

The Ideal Motion Control System for Servo Drives,

Reducing the Time and Cost Needed to Construct a System
Easy Motion Program for Positioning and Interpolation Control
Use an easy text-based programming language for complicated motion control.
Easy Programming for Interpolation BASIC-like Commands or Language Command Input Assistant
A wide variety of commands is available, so sophisticated The repeat command (WHILE) and branching With the command input assistant, you can
interpolation can be programmed with only one command. command (IF... ELSE) can be used. create a program without special knowledge
Commands Functions
Complex arithmetic expressions can be written. of the syntax.
MOV Positioning A comment can be inserted using slashes ( // )
MVS Linear interpolation or quotation marks“( ”).
MCW Circular interpolation, Helical circular interpolation (clockwise)
MCC Circular interpolation, Helical circular interpolation (counterclockwise)
ZRN Zero-point return

Variables (register) and Arrays as Parameters

Indirect assignment with variables or arrays
(subscripts i and j) can be used for parameters.
Register Value
Arrays ML30000 100
ML30002 300
ML30004 500
ML30006 510
ML30008 300
ML30010 100
ML30012

Easily Add Motion Control to an Existing PLC

You can construct a standardized drive system that can work with any PLC.
Positioning Systems that Use PLC

Problem When similar systems but different types of PLCs are used, motion control programs will be different for each PLC, as shown below.
Modules for positioning Modules for positioning Modules for positioning
Company A Company B Company C

Positioning System with MP2000 Series

Solution The same motion control programs can be used by adopting the MP2000 Series, which can be connected to the PLC of each company.
Modules for positioning Modules for positioning Modules for positioning
Company A Company B Company C

Not Not Not

required required required

Reduced wiring
High-speed control
16 axes
16
 MP2000 Series Machine Controller

High-speed Multi-axis Control High-level Synchronization High Operability Highly Expandable Optimal Positioning

PLC Connection with a Simple Setup and No Complicated Programming

Easy
connection
to PLC!
Ethernet

Optimal Positioning
④

Procedure
Select a PLC product.
Enter the IP address of the PLC.
Enter the port number of the PLC.
Establish the connection by clicking OK.

Automatic Setup Using the Self-configuration Function

The self-configuration function automatically recognizes the configuration of the optional modules and servo units
connected to MECHATROLINK, as well as the I/O devices, and sets the required definitions.
Set the INIT and CNFG to ON, RDY and RUN lit. Set INIT and CNFG to OFF
and then turn ON the power supply. after setup has been completed.
STOP RDY RUN STOP
SUP ALM ERR SUP
INIT TX BAT INIT
CNFG CNFG
MON MON
TEST TEST

OFF ON OFF ON

No Ladder Program Needed

Applications can be programmed simply by using motion programs.
Sequence programs executed at a regular cycle are added to the motion programs.
When M-EXECUTOR is used to define program controls, the motion programs can be started up or
stopped by turning the control signal ON or OFF externally.

Register programs in
the order of execution.

Startup,
stop

M-EXECUTOR Motion programs

Automatically assigned.
17
 A Variety of Support Tools

Middleware simplifies the communications setup between controllers and your personal computer
MPScope
MPScope is the middleware for communications between MP2000 Series Machine Controllers and the host computer.
With MPScope, you can easily add a function to application programs (Visual Basic or Visual C ++) on the host computer to enable access to
the registers and table data on the controller.

Main Functions
●Simplified Settings for Communications ●Easy Programming
Communications with machine controllers can be easily set All the registers and table data for MP 2000 Series
with MPScope’ s function. Machine Controllers can be easily read and written.
Special knowledge or complicated programs are not required. Just install MPScope in the host computer and add
the register operation function to the application
Before Now with MPScope… program.
1 Start an integrated development environment, such as
Communication parameters were set in Communication parameters can be set with
Visual C++, on the host computer running MPScope.
application programs. MPScope.
When the setting was changed, the You only need to specify the file name and the
application programs also had to be connection number in the application program.
changed. Even if the setting is changed, the application
programs do not have to be changed.

2 Add the function for machine-controller register

operations to the program.

For Monitoring and Managing Controller Information

MPLOGGER
By installing MPLOGGER in your PC, you can
・Monitor the machine-controller data on an Excel sheet and
MPLOGGER, control
・Save the machine-controller data at regular cycles in an mdb* database format in your PC. information monitoring
By enabling you to monitor data and make settings on a PC, MPLOGGER tool for machine
provides great back-up support for the operator and administrator. controllers
* : Microsoft Access database
Main Functions
●Simplified HMI Function ●Table Format Display/Historical Trend Graph Display ●Monitoring Function
H a s a s i m pl i fi e d H M I fu n c t ion for By using Excel functions and simple Simply set the controller ’
s address in
monitoring the controller data by using SQL commands, the data stored a cell in an Excel sheet to view and
the data as it is updated in the cells in an in.mbd files can be displayed in tables s data.
set the controller’
Excel sheet. or historical trend graphs.

Configuration Example
PC running Windows (MPLOGGER installed)
Ethernet
Applicable for Yaskawa’ s
MEMOBUS (serial communications)
MP series of machine
controllers. Applicable for
MEMOBUS and Ethernet
communications.
MPE720 can be MP2300 MP2200
installed in the
18 same PC
 For Loading Application Program
MPLoader
MPLoader is a data transfer tool that can be used to easily update the
application program of machine controllers in the MP2000 Series without using
the MPE720. MPLoader, data
Functions such as system configuration definition, programming, and transfer tool for
machine controllers
monitoring are not provided so that the original application program is secure
and will not be overwritten.
Program Provider User
2 Send file as by
Main Functions mail attachment, etc.
●For Simplified Loading ●For Machine Controllers in the
The application program can be  MP2000 and MP900 Series
easily loaded to a machine controller MPLoader can be used in a system
1 Compress 3 Decompress
if MPLoader is installed on your PC. that has different models of machine the file
file
controllers from the MP series.
●For Compressed and
 Non-compressed Data

A Variety of Support Tools

MPLoader can be used to decompress
4 Load file to controller
a compressed MAL file and load the
data to the controller. Also, it can be MP2000
used to batch load non -compressed
PLC files. Data can be compressed as
MAL files with MPE 720 Ver. 5 . 10 or MPE720 MPLoader
later. (Ver5.10 or later)

For Self-extraction and Automatic Transmission of Application Data

MPLoadMaker (For MP2100, MP2100M, MP2200, MP2300, and MP2310)

Main Functions Features

MPLoadMaker is a tool that is used to create an auto transfer data Transfer of application data is possible even when the target PC does not
(Auto_MPL) with applications* for MP2000 Series Machine Controllers. have an application transfer tool (MPE720 version 5/version 6).
When a CD-ROM containing the newly created data (Auto_MPL) is A single CD-ROM can be used to automatically transfer application data
inserted in the PC (target PC) connected to the machine controllers, to several machine controllers.
Auto_MPL will automatically decompress, open the application file, and
Because the Auto_MPL function is limited only to decompression and
send the data to the target controllers.
transfers, the application data cannot be erroneously edited on the target
*  : MPE
Applicable to MAL files (application files compressed as MAL files by
720 version 5) and YMW files (MPE720 version 6 work files).
PC.

PC for Software
Development Target PC

Write Auto_MPL Insert the CD Auto_MPL automatically

onto a CD-ROM. in the drive. decompresses,
opens the application file,
MPLoadMaker and sends the data.

Serial/Ethernet/USB Communications
Create an auto transfer data (Auto_MPL)
with an MP2000 application.

Note: MPLoadMaker does not have a function

to write CD-ROMs.
A CD burner and a driver are necessary.

MP2000 Series Machine Controllers

19
 PCI Board Type Controller that Works in Harmony with Personal Computer
MP2100(M)，MP2101(M)，MP2101T(M)
Ideal for
Devices used with personal computers.

No Special Computer Knowledge Needed

Problem…
Knowledge of computers is needed when using controllers installed on computers.

When the MP2000 Series is Used…

The same motion and ladder programs that are used for other controller series can
be used here. Special computer skills are not required. Downloading and debugging
Common
application
MP2200
programs
Application program
Data
Ladder Motion (register)
program program
MP2100，
MP2101，
MP2101T I/O data
Motion control system
MP2300，
MP2300S Yaskawa’
s products
MP2310
Motion control
from MP2100
MECHATROLINK- /

All-in-one Personal Computer

Problem…
You have computers, but now need controllers. That will require more space and
wiring expenses.

When the MP2000 Series is Used…

MP2100，
No need to add a power supply; it runs on an existing computer. MP2101，
Motion controls can be programmed directly and easily by accessing the MPE 720 MP2101T

on a computer, via the PCI bus.

The servo control function is provided as a standard feature.
MECHATROLINK- /
16-axis and 32-axis controls are provided.
A variety of MECHATROLINK- and compliant models are available.
I/O can be expanded easily with MECHATROLINK remote I/O.
Number of
Name Model Specifications
Controlled Axes Remote I/O
MP2100 JAPMC-MC2100-E Regular 16 axes
MP2100M JAPMC-MC2140-E speed 32 axes
MECHATROLINK-
MP2101 JAPMC-MC2102-E 16 axes
MP2101M JAPMC-MC2142-E High 32 axes
MP2101T JAPMC-MC2102T-E speed 16 axes
20 MP2101TM JAPMC-MC2142T-E
MECHATROLINK-
32 axes
 Easy Access to All Data from Personal Computer
Problem…
You want to have window displays on a personal computer
to operate and monitor devices.

When the MP2000 Series is Used…

With 51 extensive APIs, you can access all data through
Personal Computer (PC)
MS Windows programs.
Simple and non-real time motion controls are available. Motion API

Windows NT/ 2000/XP

(General-purpose OS)

Motion API Window PCI bus

Motion related API Motion control Data (register)

Device related: Servo ON/OFF
Positioning: JOG feed, origin return, positioning, external positioning, and specified time positioning
Interpolation: Linear interpolation, circular interpolation, and helical interpolation
Main Torque reference Gear function Latch function Ma
Motion Motion operation: Modification of motion data and parameters
APIs MP2100，
System API MP2101，
Register operation: I/O operation Alarm: Information acquisition and alarm clearing MP2101T
System operation: Opening, closing, and switching of object controller
MECHATROLINK- /
Operation calendar

MP2100(M), MP2101(M), MP2101T(M)

Expandable - Up to 24 Modules and 3 Racks
Problem…
Board type controllers installed on personal computers
lack expandability in local I/Os and communications.

When the MP2000 Series is Used…

Up to 24 optional modules can be mounted on
up to 3 racks when the MP2100MEX expansion
I/F board for the MP2000 Series is installed.
All optional modules for the MP2000 Series can
be mounted.
Connectable to various open networks
(Ethernet, DeviceNet, PROFIBUS, EtherNet/IP, MP2200 base unit*1
(3 racks possible)
FL-net, and CompoNet) EXIOIF*2
cable MP2100M，+ MP2100MEX
Connectable to various I/Os MP2101M，
MP2101TM
Multi-axis control for up to 256 axes

EXIOIF
cable

Various Optional Modules Available!!

EXIOIF
cable

Connection module
Communication Modules Optional module between racks
I/O Modules (EXIOIF)
Motion Control Modules
*1 : On the MP 2200 base unit, 8 modules ( excluding the EXIOIF module ) can be
mounted in one rack. A total of 24 modules can be mounted in 3 racks.

*2 : Use an EXIOIF cable that is 6.0 m long or shorter.

21
 A Flexible, High-performance Module Type Controller
that Expands to Meet the Needs of the System
MP2200
Ideal for
Systems that require reduced tact time and large scale
systems that require sophisticated multi-axis control.

Select the Optimal CPU for Your System

Problem…
You need a CPU that provides the performance your system requires.

When the MP2000 Series is Used…

Four different CPUs to choose from.
You can select the CPU you need to achieve the required
tact time. By simply changing the CPU, optimum tact CPU-01 CPU-02 CPU-03 CPU-04
MP2200 Base Units
time can be realized at a reasonable cost because the
Number of optional
programs are compatible. Name Model Description
module slots
Base units are selectable. MBU-01 JEPMC-BU2200 85 VAC to 276 VAC
9
Base units with slots (4 or 9 slots) are available and can MBU-02 JEPMC-BU2210 24 VDC ± 20%
be selected according to the needs of the system. MBU-03 JEPMC-BU2220-E 24 VDC ± 20% 4
Note: Attach a cover (sold separately; model: JEPMC-OP2300) to each empty slot.

Improved System Tact Time with High-speed CPUs

Problem… When the MP2000 Series is Used…
Sophisticated new devices require more time for processing due to the increased Proven performance of the high-speed CPU-04.
number of calculations. Tact time for those devices needs to be improved. Reduced application execution times. CPUs in the
New product existing system can be replaced.
Performance

MPU-01 When the CPU-04 is used:

CPU-04 (Multiple-CPU) 1000 IC chips are transferable every 30 seconds, in
half the time of the CPU-02, so productivity is doubled.
CPU-03
Where the scan time of the CPU-02=100
CPU-02 ＋
CPU-02
CPU-01
CPU-03 Twice as
Used with CPU fast as
CPU-04
CPU-02
0 20 40 60 80 100

Ultra High-speed Motion Control Achieved by a Distributed Processing System

Performance improves because the
Problem… load of running several programs can
Distributed system: 1 ms be divided among multiple CPUs.
More time is required for the motion
control cycle when a single CPU is CPU-04: 1 ms

used to control all axes.

I/O

When the MP2000 Series is Used… MPU-01

The scan time can be set to 250 μs 250 μs min. MPU-01:

Motion Control

1 ms/8 axes Standard

minimum.
Data

system
Processing of programs can be split 3 ms/10 axes
(current status)
up by executing the motion control 250 μs min.

programs with the MPU. A total of

MPU-01:
16 MPU-01 modules can be mounted
Motion Control

250 μs/2 axes

Data

and synchronized with the main

CPU. ( Scan cycle time : 0 . 5 ms AC Servo
minimum). Drives
Linear Direct-drive
Series Series

22
 Variety of Optional Modules Compatible with All MP2000 Series Machine Controllers*
Problem…
* : Excluding MP2400
As with PLC systems, motion control systems require various I/Os and connections to open networks.

When the MP2000 Series is Used…

The optional modules used are common to all MP2000 Series Machine Controllers. User friendly optional modules
are available in a variety of types, and are compatible with open networks and various I/Os.

Motion Control Modules I/O Modules Communication Modules

Connects to the SERVOPACK Provides digital or analog Used to construct an
for motion control. Various I/O interface. open network. Modules
MECHATROLINK slaves can with various types of
be connected to the SVB-01 interfaces are available.
module.

Name Model Description

* Name Model Description Name Model Description
*
JAPMC MECHATROLINK- × JAPMC Digital input: 16 points (sink output mode) Ethernet (10BASE-T)
SVB-01 LIO-01 Digital output: 16 points (sink output mode) JAPMC
-MC2310 1 channel -IO2300 Pulse input: 1 point 218IF-01 port × 1 8
-CM2300
JAPMC MECHATROLINK- × JAPMC Digital input: 16 points (source output mode) RS-232C port × 1
SVC-01 LIO-02 Digital output: 16 points (source output mode)
-MC2320-E 1 channel -IO2301 Pulse input: 1 point JAPMC Ethernet (100BASE-TX)
16
JAPMC Analog-output 2-axis JAPMC Digital input: 32 points 218IF-02 -CM2302 port × 1 8
SVA-01 LIO-04 Digital output: 32 points
-MC2300 servo control -IO2303 (sink output mode) -E RS-232C port × 1
JAPMC Pulse-output 4-axis JAPMC Digital input: 32 points JAPMC RS-232C port × 1
PO-01 LIO-05 Digital output: 32 points 217IF-01 8
-PL2310-E servo control -IO2304 (source output mode) -CM2310 RS-422/485 port × 1
Digital input: 8 points DeviceNet port × 1
* : Maximum number of modules that one CPU can control. JAPMC
Digital output: 8 points (sink output mode) 260IF-01
JAPMC
8
LIO-06 -IO2305 Analog input: 1 channel -CM2320 RS-232C port × 1

MP2200
Analog output: 1 channel
-E Pulse counter: 1 channel JAPMC PROFIBUS port × 1
261IF-01 8
JAPMC -CM2330 RS-232C port × 1
DO-01 Digital output: 64 points (sink output mode)
-DO2300 JAPMC FL-net
JAPMC 262IF-01 -CM2303 (100BASE-TX) port × 1 8
AI-01 Analog input: 8 channels
-AN2300 -E (10BASE-TX) port × 1
JAPMC 263IF-01 JAPMC EtherNet/IP (Scanner
AO-01 Analog output: 4 channels 8
-AN2310-E EtherNet/IP -CM2304-E and adapter) port × 1
JAPMC 264IF-01 JAPMC Port for EtherCAT slave
CNTR-01 Pulse-input counter 8
-PL2300-E EtherCAT -CM2305-E × 2 (1 circuit)
Note: One CPU can control unlimited number of modules. 265IF-01 JAPMC
CompoNet port × 1 8
CompoNet -CM2390-E
215AIF-01 JAPMC MPLINK communication/
8
MPLINK -CM2360 RS-232C
215AIF-01 JAPMC CP-215 communication/
*Note
: Maximum number of modules that one CPU can control.
: For RS-232C communications, 16 ports can be used. CP-215 -CM2361 RS-232C
8

Expandable - Up to 35 Modules and 4 Racks, with Synchronization of Up to 256 Axes

Problem… Connection module
CPU module (CPU-01/02)
between racks
When using standard PLCs, multiple (EXIOIF)
controllers must be used for larger
MECHATROLINK- /
scale systems, and the synchronization
of many axes is hard. ・・・
EXIOIF*
cable
When the MP2000 Series is Used…
MECHATROLINK- /
When the MP 2200 is used, a large
・・・
scale motion control system can be EXIOIF Synchronization
constructed with one CPU. cable among modules
Up to 35 optional modules can be MECHATROLINK- /
mounted. ・・・
256 axes can be perfectly EXIOIF
cable
synchronized because the modules
MECHATROLINK- /
are synchronized.
・・・

Optional modules

* : Use an EXIOIF cable that is 6.0 m long or shorter.

23
 All-in-one Controller with Built-in Power Supply,
CPU, and Functions for Network Communications
and Servo Control
MP2300，
MP2310，
MP2300S
Ideal for
Pursuing better system cost performance,
both in simple positioning and interpolation
and in sophisticated multi-axis control.

Integration of Power Supply, CPU, Communications, and Servo Control

Problem…
Standard PLCs require a power supply, CPUs, positioning modules, I/Os and communication modules, increasing costs.

When the MP2000 Series is Used…

Whatever is needed for motion control can be integrated into the basic module.
I/Os and communications can be expanded by attaching optional modules when needed.
The same programs as the MP2200 can be used to fully support functions. This is an
all-purpose controller to which any optional module can be mounted.
Optional modules

MP2300 MP2310 MP2300S

Built-in Maximum
Number
Name Model Standard Number Number of
I/O Communication Servo Control of Slots
of Controlled Axes Controlled Axes
Input: 8 points,
MP2300 JEPMC-MP2300 − 48
Output: 4 points 3
MECHATROLINK- ×1 16
MP2310 JEPMC-MP2310-E − 64
Ethernet × 1
MP2300S JEPMC-MP2300S-E − 1 32

High-speed Synchronous Distributed System with Multiple Controllers

Problem…
When using only one controller, the
control cycle becomes longer. Master
MP2300S, Synchronization
MP2300,
When the MP2000 Series is Used… MP2200 MECHATROLINK-

The new slave - CPU synchronization Synchronization

Slave Slave
function has been added to the standard between controllers
MP2300S MP2300S
motion network MECHATROLINK- on the + +
Two CPUs - SVB-01 SVB-01
MP 2310 and MP 2300 S. By connecting faster speed Module Module
slave machine controllers to the master and half the
MP 2000 Series Machine Controller with load Synchronization
MECHATROLINK, synchronous operation MECHATROLINK-
between slave controllers is possible. In Synchronization
this way, the total load can be divided, so between servo axes
the load of each slave controller is reduced
and high -speed synchronous operation
for multi-axis motions can be performed.
24
 An Optimal and Compact Unit Controller that
Provides a System with Positioning and an
Interpolation Function with Less Wiring

MP2400
Ideal for
Small devices for simple positioning
and interpolation.

Compact Controller Handles up to 16 Axes

Problem…
You have to construct a large scale PLC system even if all you need is a simple multi-axis motion system.

When the MP2000 Series is Used…

The MP 2000 Series Machine Controller is equipped with a power supply, CPU, one MECHATROLINK - for motion
control, and Ethernet to connect with a PLC and HMI. The MP 2400 can be connected to multiple devices without
programming and can handle all jobs required. A motion distributed system can be constructed by connecting distributed
I/Os and devices through MECHATROLINK.
Touch panel
Connect without
programming Products of business partners
Ethernet PLC

・ MP2300, MP2310, MP2300S

MP2400
MECHATROLINK- By Anywire Corporation By RKC Instrument Inc. By Phoenix Contact GmbH & Co. KG By M-System Co., Ltd

Business partners
Manufacturers of I/Os and
temperature controllers
2-core cable
Various remote I/O
(DIO, AI, AO, PO,
and counter)
/ -Stick JUNMA
Inverter Digital I/O terminal
Distributed system by A1000/V1000
MECHATROLINK, with less wiring

MP2400
Free Download of MPE720 Integrated Engineering Tool
Problem…
You want to add some axes to the existing system, but new tool will be expensive.

When the MP2000 Series is Used…

The integrated engineering tool MPE720 Ver.6 Lite, dedicated to MP2400
machine controllers, is available for free. Download it from Yaskawa’s
P r o d u c t a n d Te c h n i c a l I n f o r m a t i o n o n Ya s k a w a ’s w e b s i t e a t
http://www.e-mechatronics.com.
Positioning and interpolation control can be easily programmed with motion
programs. Ladder programs are not supported yet.
MPE720 Version 6 Lite Integrated Engineering Tool

Motion Program Startup without Program when Connected to PLC

Problem…
You need a program to call up programs to execute if a PLC is used.

When the MP2000 Series is Used…

The motion programs can be executed without the need to call up programs from the host PLC. Simply register the prepared
motion programs in their order of execution. By registering several motion programs, sophisticated motions are possible.
25
 This All-in-one Controller Delivers a
Smaller Motion Control System and PC
Provides a Variety of Useful Data
MP2500/M/B/MB
HMI

Sequence
programs
Ideal for
Motion
Any system that needs to be compact control

but must still provide plenty of data.

Sequence (PLC Function), Motion Control, and HMI (Panel Display) are Unified
Problem… When the MP2000 Series is Used…
You need various devices, including a panel computer, The integration of a panel computer with a controller in
a personal computer, PLCs, and controllers. one unit will reduce system size and cost.

Integration

Controller
MP2500
PLC PLC PLC

32-axes
control

Flexible System Configuration

Problem… When the MP2000 Series is Used…
You find it difficult to add I/Os and communications to panel All optional modules for the MP2000 Series can be used.
and personal computers.

Ethernet DeviceNet PROFIBUS

Supports various
CC-Link (as a slave station) EtherNet/IP
open networks. FL-net Serial interface, etc.
MP2500B-OP/MP2500MB-OP
MP2500ME
Extensive lineup of optional modules One slot for an
in the MP2000 Series optional module*
Expansion rack*

* : By mounting an EXIOIF module,

* : 24
An expansion rack enables use of 3 to an expansion rack can be
optional modules. connected to the MP2500B-OP
or the MP 2500 MB - OP in the The panel can be
same configuration as for the used up to 10 m away
Optimum I/O modules can Digital I/O Analog I/O MP2500ME.
be selected for your system. Pulse I/O, etc. from the controller.

System Status Confirmation without a Personal Computer

Controller and servo drive status can be monitored with standard feature displays.
Problem… When the MP2000 Series is Used…
It is difficult to create the windows for various functions with a These windows can be easily created with the screen-creation
general panel computer and I/O terminals. tool. Windows for monitoring controllers and servo drives are
standard features of the MP2000 Series, and ready for use.

Data tracing Program monitoring

26 Register monitoring
Screen-creation tool MotionScreen
 Tough against Vibrations, Power Outages, and Viruses
With the compact flash card, no hard disk is required.
Problem… When the MP2000 Series is Used…
With panel and personal computers, vibration, power With no hard disk, the MP 2500 controller is highly resistant to
outages and computer viruses are always a concern. vibration. Computer viruses are fended off by the use of ROM, and
the MP2500 controller will not crash even if there is a power failure.

No worries about
MP2500
Highly reliable, power outages
Protection against
with ROM
viruses! compact flash
card

Highly resistant
to vibration

Strong Support for the Sophisticated Control Functions of the MP2000 Series
Programs and motion control functions can be used with any controller from the MP2000 Series.
Problem… When the MP2000 Series is Used…
Programs must be developed again when a different device Various models are provided with common and interchangeable
and/or controller is adopted. programs.

Same Same

MP2500/M/B/MB
application programs application programs

Engineering via Panel Computer

All engineering can be done on a personal computer connected via the USB on the panel computer.
Problem… When the MP2000 Series is Used…
You want to do maintenance without having to No need to open the control panel. You can check the current
open the control panel. status and make adjustments to the controller and servo drives
by connecting the personal computer via the USB port on the
panel ( Uses the integrated engineering tool MPE 720 and
SigmaWin+).

Touchscreen Panel Control Panel

of the Display

MPE720 Engineering Tool

USB

Laptop computer

Servo System Adjustment Tool SigmaWin+

27
 More about the MP2000 Series

1 Self-configuration Function
The MP2000 Series Machine Controller
Try it!
Input definition settings that are necessary
with other controllers are not needed, so
the setup time is greatly reduced.
automatically recognizes the devices
connected to MECHATROLINK- . For module configuration definition,
I/O assignment, servo parameter
Optional module configuration For programming settings, and other settings.
definitions
I/O register assignment MP900
Communication parameter settings Series
(MP2200 and MP2300 only)
MP2000
Servo drives (servo parameters Setup time
Series
and parameters) connected to
Self-configuration function reduced to
MECHATROLINK-
I/O points connected to 10%
MECHATROLINK-

Self-configuration with DIP switches Self-configuration with the MPE720

STOP
6

Set the DIP switches, INIT and Select it on the order menu in
SUP
5

CNFG, on the basic module or on the MPE720 Engineering

INIT the CPU module to ON, and then Manager window.
4

CNFG turn on the power supply.

3

MON
2

TEST
1

More Information More Information

OFF ON
Any definitions that have been set All Modules ( All Self - configuration )
with the self - configuration function or Specified Modules ( Module Self -
will not be saved in the Flash ROM. configuration) can be selected.
Use the MPE720 to save these
definitions in the Flash ROM.

2 Application Converter Function* Try it!

Existing programs can be easily
converted for reuse.
*: MPE
Included in the Engineering
720 version 5.
Tool

The ladder and motion program MPE720 MPE720

Version 5 Version 5
registers used in the MP900 Series Application Converter Function
can be converted for use in the
MP2000 Series. Ladder Ladder
program program
Notes: 1 For some registers and parameters,
options must be selected before Application conversion A
converting. Ladder Ladder
2 When using applications for the MP920 program program MP2200
MP900 series with MPE720 version by Ladder by Ladder
Works Works
6, compress the converted file into Application conversion B
a MAL file.
Motion Motion
program, program,
etc. etc.
Application conversion C

28
 For the MP2000 Series Machine Controllers Related Products
MYVIS YV260 Network Machine Vision System Made by Yaskawa Electric Corporation

Example of System Configuration

In this example, the MYVIS YV 260 is connected to the open motion network
MECHATROLINK. With MECHATROLINK communications, the MYVIS can
s axes in succession. Using
receive data on the current position of the motor’
this data, the necessary adjustments are determined for high - accuracy
calibration of the machine coordinate system.

Simultaneous capture of images from

two cameras increases the processing speed.

Monitor MP2500
machine controller
Camera 1 Camera 2
Stage coordinate data
Position correction data MECHATROLINK- Connected to
other devices
such as I/O
devices,
Detects two alignment SGDV stepping motors,
marks. Obtains the and inverters.
amounts to be adjusted
in the machine MYVIS YV260
coordinate system, and
then correct the
positions accordingly.

Item For Analog Cameras For Camera Link

Model JEVSA-YV260 1-E JEVSA-YV260 2-E
Image Processing Gray scale pattern matching, binary image analysis etc.
Application Program 512 Kbytes (flash memory)
Backup Memory 256 Kbytes CMOS (for saving parameters)
Memory Template Storage Memory CF cards (2 Gbytes max.)
Image Frame Memory 4096 × 4096 × 8 bits × 4 images (Can be used for 640 × 480 × 8 bits × 192 images)
Memory Template Memory 16 Mbytes
New EIAJ 12-pin connector × 4 Camera Link (MDR26pin) × 4
Camera Interface EIA (640 × 480) to (1400 × 1050) VGA (640 × 480) to QSXGA (2440 × 2048),

・ More about the MP2000 Series

Four B&W, 8-bit A/D-converter circuits Base Configuration, PoCL-compatible
Image Camera Power Supply Single camera: 12 V, 400 mA, Total: 1.2 A
Input Camera Sync Mode Internal/external sync Internal sync
Random Shutter Supported Sync-nonreset, sync-reset, single VD or V reset
Simultaneous Image Capture Four cameras
Input Image Conversion Gray level conversion (LUT), mirror mode
Monitor Output VGA，XGA (color), 15-pin D-sub
Monitor A full-screen or a partial-screen for one camera, simultaneous screen reduction for two or four cameras,
Image Display
gray level conversion (binary image display supported)
Field Network MECHATROLINK- /
LAN (Ethernet) 10BASE-T/100BASE-TX
General-purpose Serial RS-232C × 2 channels (115.2 kbps)
Related Products

16 general-purpose outputs (4 of these are also used for stroboscope)

I/F
+2 outputs exclusive for alarms (24 VDC, photocoupler isolation)
Parallel I/O
16 general-purpose inputs (4 of these are also used for trigger) +3 inputs exclusive for mode switchings
+1 input exclusive for trigger (24 VDC, photocoupler isolation)
Track Ball USB mouse
Power Supply 100 V/200 VAC, 24 VDC, 30 W

29
 For the MP2000 Series Machine Controllers Related Products
Connect an MP2000 Series Machine Controller to a display monitor, such as one made by
Digital Electronics, to view information about the servo axes or the status of your motion
control system without a PC. Visualize your system with MP2000 Series Machine Controllers.

Programmable Display Unit Pro-face GP3000 Series Made by Digital Electronics Corporation

Machine controllers, servo drives, and inverters can be adjusted and

maintained with this display unit. You can easily check system startup and
maintenance status, pinpoint the causes when an error occurs, and update
or back up application programs with the display on-site without using a
computer.

Features
1 Touchscreen to easily confirm the status of the MP2000 Series Machine Controller
2 Wide variety of windows to monitor all axes and the status of MP2000 Series Machine Controller
3 Register list to easily monitor and edit registers
4 Application programs can be updated or backed up by using the program transfer function,
without using a computer.
5 Free samples of windows for various functions can be downloaded. No special device is required
to set up screens.

MECHATROLINK
Pro-face GP3000 Series
made by Digital Electronics Corporation

The cockpit parts can be downloaded from the homepage of

Supports the Visualization Function Digital Electronics Corporation:
for the MP2000 Series Machine Controller http://www.pro-face.com/otasuke/

Main Window System Error Status System I/O Error Status

(with Symbolic and Pictorial Parts)

Module Information Programs being Executed Axis Information

30
 Engineering Support Function

Program Transfer with an External Memory Unit!

Programs are transferred via
Execution files for transferring programs
the external memory unit.
are stored in the external memory unit.

Pro-face GP3000 Series

MPE720
made by Digital Electronics
(version 5 and version 6)
Corporation
Integrated engineering tool

Screen creation software

GP-Pro EX version 2.2 or later,
made by Digital Electronics
Corporation
Note: Download the latest version of the connected
   device data copy tool from the Digital Electronics MP2310
   Corporation website:http://www.pro-face.com/otasuke/

Adjustment and Maintenance of Servo Drives and Inverters Right on the Touch Panel!
Parameter editing
Cockpit for series
servo drives MP2000 Series
Operation monitoring Machine Controller

Ethernet

Parameter backup Test run

MECHATROLINK

Axis setup

・ Related Products
For the MP2000 Series Machine Controllers Third-party MECHATROLINK-compliant Devices
Partners of the MECHATROLINK Members’Association manufacture the following MECHATROLINK-compliant
devices. These devices can be connected to the MECHATROLINK connector on any MP2000 Series Machine
Controller for a bus with reduced wiring. Third-party MECHATROLINK-compliant Devices

Remote I/O R7 Series Made by M-System Co., Ltd

Connects different networks to one Master controller Master controller

MECHATROLINK network.
Motion
network DeviceNet Integrates MECHATROLINK

The R7 series of I/O modules has a power supply as Motion units I/O section Motion units I/O section
well as communications section and I/O capability
in a compact design. The R 7 series is ideal for
applications in which remote I/O is required
because a small number of signals are scattered.
No location restrictions
Extension modules can be added to a basic
module. One R7 module can be used for a variety
Note: For inquiries on R7 series Compact Remote I/O, contact M-System Co., Ltd.
of I/O signals, including analog I/O and contact I/O. For more details, visit the M-System website: http://www.m-system.co.jp/

31
 For the MP2000 Series Machine Controllers Third-party MECHATROLINK-compliant Devices
MECHATROLINK Bit-type Distributed I/O Terminal MP2200/2300/2310
Made by Anywire Corporation (Yaskawa)
MECHATROLINK
The MECHATROLINK Bit-type distributed I/O terminal MECHATROLINK Servo
Tree, Star, or
contributes to the reduction of wiring required for drive Bit-type Distributed Drives
Multi-drop
I/O Terminal
systems that use MECHATROLINK- / . Connection with Cables
Bus
Introduction of this new I/O terminal into a 24 VDC
MECHATROLINK open-network system significantly Power Supply General-
reduces the total costs and increases system reliability, purpose
1 or 2-point I/O 4-, 8-, or 16-point Robot Cable
because the MECHATROLINK I/O terminal can be used Model : AB023-M1
Terminal I/O Terminal
with any transmission media such as robot cables and
Slip Ring for
slip rings. Robot Arm I/O Terminal
The Bitty series of I/O terminals from AnyWire can be
Terminator
connected to increase the flexibility in transmissions by
supporting the connection of cables for signals from
I/O Terminal
sensors and actuators in the system. Possible to
expand number of I/O points to 432 by connecting I/Os Indicator
Sensor Solenoid Valve
Lamp
with a bus that reduces the amount of wiring required.
Note : For more details on AFMP-01 module and AB023-M1 I/O terminal, contact
Anywire Corporation or visit its web site, http://www.anywire.jp.

No Out-of-step Stepping Motor and Driver Package Controller for Stepping & Servo Motors
Made by Oriental Motor Co., Ltd. Made by Melec Inc.

The MECHATROLINK- compliant α STEP stepping motor and Easy operation by combining I/O bit signals.
driver in the AS-series uses a unique closed-loop control and Specially designed software enables you to make
eliminates missed steps. settings or confirm operation status on the
The α STEP does not require tuning or hunting to achieve personal computer.
high-response positioning without any missing steps during Individual control of four axes with compact motion
sudden load changes or acceleration. controller: 88.5 × 94 × 59 mm (W × D × H)
Only one cable is required to connect the motor to the driver.
A wide range of products including various types of geared motor,
the EZ Limo motorized sliders, and the DG series of hollow rotary
actuators can be connected and controlled with MECHATROLINK- .
Note: For more information on ASD ME Model: C-M581S
stepping motors, contact Oriental Motor
Co., Ltd. or visit its website at
http://www.orientalmotor.com. Note : For more information on C-580-series controllers,
contact Melec Inc. or visit its website at
http://www.melec-inc.com.

Model: ASD ME

MECHATROLINK Inline Bus Coupler for Modular I/O Systems Module-type Digital Temperature Controller
Made by Phoenix Contact GmbH & Co. KG Made by RKC Instrument Inc.

The Inline bus coupler, model IL M BK DI8 DO4-PAC, Easily construct a multi-channel temperature control system by
has eight digital input terminals and four digital output connecting the MECHATROLINK-compliant communications
terminals as a standard feature. converter module to the temperature control modules.
The Inline modules for I/O signals can be expanded, A single temperature control module can control
and 52 modules can be connected. temperatures of four points or two points. Also, 16 modules
A wide range of input and output modules are can be connected for temperature control of maximum 64
available, including digital input, digital output, analog points.
input, analog output, and temperature control modules. Digital I/O modules to output temperature alarms and to
switch operation modes by using contact signals can also be
connected.
Model: IL M BK DI8
DO4-PAC Digital I/O modules
Model: SRZ
Communications converter module COM-MY
Temperature control module Z-TIO
Digital I/O module Z-DIO
Analog I/O modules

Note: For more information on IL M BK DI8 DO4-PAC,

contact Phoenix Contact GmbH & Co. KG or visit its Note: For more information on SRZ temperature controllers,
website at, http://phoenixcontact.com/global/. contact RKC Instrument Inc. or visit its website at
http://www.rkcinst.co.jp.

32
 Other Modules / Terminals : Not Available from Yaskawa
Modules from the listed manufacturers can be directly installed and used with the MP2200, the MP2300,
the MP2310, and the MP2300S. A wire-saving bus can be formed with the bit-type distributed I/O terminal
connected to the MECHATROLINK-cable connector of a machine controller in the MP2000 Series.

AnyWire DB Master Module Made by Anywire Corporation

The AnyWire DB Master module allows a direct System Configuration: Full Triple Mode Transmission
connection between the MP2200/MP2300/MP2310
/MP2300S controller and the AnyWire system. MP2300
Because the AnyWire DB Master module has upper
compatibility with the UNI-WIRE system, new ways
to construct a system are possible.
Model : AFMP-01
AFMP-01 in full triple mode
Features
1 The AnyWire system reduces the wiring, time, space, and costs, because Input
Bit-Bus

1km max.
slave
you can use general-purpose cables instead of the costly cables. Output

2 The Dual-Bus system realizes high-efficiency, high-speed transmissions Input Word-Bus

and allows analog transmission (128W) to be connected without slave
Output
disturbing the digital transmission (512 I/O points). UNI-WIRE
3 Recommended for the drive section, which requires reduced wiring, UNI-WIRE
slave
because general-purpose robot cables, cableveyor devices, slip rings, Note: For more details on the AFMP-01 module, contact
etc. can be used. the Anywire Corporation or visit its web site,
http://www.anywire.jp.

CC-Link Interface Board Made by Anywire Corporation

Slave interface board for Features

connecting the MP2200/ 1 A single CC-Link master station, a PLC from the Q
MP2300/MP2310/MP2300S series by Mitsubishi Electric Corporation, can be
to the host CC-Link. Two connected to 16 MP2200, MP2300, MP2310, and
models are available: the MP2300S machine controllers with the CC-Link.
AFMP-02-CA with an AnyWire 2 The setup time can be greatly reduced by the
DB port for reduced wiring Model: AFMP-02-CA self-configuration function of the MP2200, MP2300,
and the AFMP-02-C without MP2310, or MP2300S.
an Anywire DB port. 3 Anywire port for reduced wiring saves costs and space.
Q-series PLC
Note: For more details on the AFMP-02-CA board,
(by Mitsubishi Electric Corporation) contact the Anywire Corporation or visit its web
System Configurations site, http://www.anywire.jp.
CC-Link One Master for 16 Machine Controllers
If a Q-series PLC made by
CC-Link MP2300 Controller
Mitsubishi Electric Corporation

・ Third-party MECHATROLINK-compliant Devices

MP2300 Controller CC-Link (by Yaskawa Electric Corporation)
2300
MP2300 (by Yaskawa Electric Corporation) MP2300
AFMP-02-CA
is connected to a Machine AFMP-02-C CC-Link Interface Board
Controller through CC-Link, only CC-Link Interface Board with Anywire Port for Reduced Wiring

one CC-link master allows you AnyWire DB General-purpose 2- or 4-core cable

to connect to 16 controllers MECHATROLINK- / MECHATROLINK- / Digital I/O

AB023-M1 AB023-M1 Terminal
including MP2200, MP2300, Distributed Bit I/O Terminal Distributed Bit I/O Terminal
MP2310, and MP2300S Machine AnyWire Bitty AnyWire Bitty
Digital I/O Terminal
Controllers. Robot Robot
2-core Cable Cable 2-core Cable Cable

Analog I/O Terminal Analog I/O Terminal Analog I/O

Slip Slip Terminal
Ring Ring

A-net/A-Link Master Unit Module Made by Algo System Co., Ltd.

This A-net/A-Link master unit module can be directly A-net

connected to the MP2200, the MP2300, the MP2310, Max.number of slaves: 64
and the MP2300S. The resulting system construction
Other Modules / Terminals

uses less wiring and conforms to SEMI E54.17.

A-Link
Features Max.number of slaves: 63

1 Two H8S units by Renesas Technology Corp. can be added. Model: MPANL00-0
2 Max. 4032 points can be scanned in 0.95 ms (at 12 Mbps).
Note: Using two A-Link systems (2016 points/system, 0.95 ms at 12 Mbps).
Note: For more details on the MPANL00-0 master unit
3 Shared memory of 512 Bytes (response speed: 2.36 ms) with A-net. module, contact the Algo System Co., Ltd. or visit
4 Self-diagnostic function. its web site, http://www.algosystem.co.jp.

33
 Reconfiguring Systems with the MP2000
When a Standard PLC with Positioning Module and Pulse Train Interface is Used
Problem 
・Many modules are needed for positioning (total of seven modules in this example).
Display
・More installation space and additional costs for wiring are needed.
・Requires axis-by-axis adjustment and maintenance
・Limited positioning points per axis (e.g. 500 points/axis)

PLC
Digital Input: 64 points × 4
Digital Output: 64 points × 4
Analog Output: 4 channels × 1

Stepping Motors

AC Servo Drives: 24 axes

Advantage of the MP2000 Series

・The MP2300S is a reasonably priced machine controller that can control up to 16
Machine Controllers
axes with its basic module. It can control 32 axes if an SVB-01 module is installed.
・Wiring costs and installation space are reduced with reduced wiring.
・All axes can be adjusted and maintained with a personal computer connected to
the MP2000 Series Machine Controller.
・High-speed image recognition enables non-stop alignment, delivering high-speed motion control.
Ethernet
・Servo drives and I/Os can be easily expanded.
・Positioning programs can be easily created with motion programs.
・A position table (max 65535 words) can be used. (Up to 2MB when the table data function is used.)
MP2300S
＋SVB-01
Reasonably Highly expandable
priced
(Servo drives and I/Os can be easily expanded)
Scanning Time Reduced wiring, cost and
Max 500 μs installation space
Non-stop alignment

MECHATROLINK-

MYVIS

Cameras

MECHATROLINK-

RS-422

Analog Output:
2 channels Network
Digital I/O:128 points Converter
(Input: 64 points, Output: 64 points)

Stepping Motors
［Made by Oriental Motor Co., Ltd.］

34
 Controllers Connected to a Personal Computer with a Pulse Generating Board
Problem
Personal Computer for ・Significant installation space and wiring costs are required as a pulse-train interface is used.
Factory Automation ・Status data for servo drives and parameters cannot be transferred to the controller.
Touch Panel ・Execution timing is often out of sync because applications are MS Windows-based programs.
for Operation

AC Servo Drives

AC Servo Drives
Pulse Generating Board

Pulse Generating Board Stepping Motors

I/O Master

Advantage of the MP2000 Series

・The MP2101TM can control 32 axes (2 ports, 16 axes/port) and supports
Machine Controllers
MECHATROLINK-  communications.
Personal Computer for
Factory Automation ・The scanning time is 500 μs at maximum speed, and the transmission cycle is 250 μs for 7 axes.
・Synchronized control of up to 32 axes.
Touch Panel
・No additional power source is required, because the power is supplied from the computer.
for Operation
The power can be supplied consistently for an extended period of time.
・Application programs are executed in the board, and are compatible
with MP2200 and MP2300S machine controllers.

MECHATROLINK- Transmission Cycle: 250 μs

Reconfiguring Systems with the MP2000

Great performance
MP2101TM

Scanning Time Reduced wiring, cost and

Max 500μs installation space
AC Servo Drives: 7 axes

MECHATROLINK- Transmission Cycle: 500 μs

RS-422

Remote I/O: 128 points Network

(Digital Input: 64 Points, Converter
Digital Output: 64 Points)
Network Converters
AC Servo Drives: 7 axes Remote I/O: 2 channels ［Made by Oriental Motor Co., Ltd. ］
(M-  → RS-422)

35
 Note: For examples of system configurations using MECHATROLINK- ,

System Configurations see pages 38 and 39.

For examples of system configurations if using the MP2300S and
the MP2400, see pages 24 and 25.

MECHATROLINK- System Configuration for MP2200

An example of how the optional module can be connected is shown. Each connection is marked by a number.
Refer to that number in the table to see the cable specifications for that specific connection.

CF Card Touch Panel Switches, Sensors, Indicators, etc

1 2 2

MP2200 CPU-02 218IF-01 SVA-01 SVB-01 PO-01 LIO- 04 DO- 01 CNTR-01 EXIOIF

MP2200 217IF-01218IF-01 SVA-01 SVB-01 PO-01 LIO-04 DO-01 CNTR-01 EXIOIF

3
8 9
MPE720 Stepping
-installed PC 4 Motor Encoder
MP2200 Base Unit

MECHATROLINK-
7 MECHATROLINK- (10 Mbps) Repeater

SGDV SGDV SGDV A1000 MYVIS

YV250/YV260
0.5 ms : 4 stations max.
I/O 1 ms : 9 stations max.
Series Direct-drive Linear Series 1.5 ms : 15 stations max.
Series
AC Servo Drives Inverter Drive Cameras 2 ms : 21 stations max.
= a number of servo axes
(16 axes max.)
7 MECHATROLINK- (10 Mbps)
+ a number of I/O
SGDV SGDV SGDV A1000 MYVIS stations
YV250/YV260
Note: 0.5 ms is not available
for the MP2300.
I /O
Series Direct-drive Linear Series
Series
AC Servo Drives Inverter Drive Cameras
6

6 SGDV (analog)

SGDV (analog)
5

MP2000 Other
Series MP920 FA-Server4.0* Controllers

* : Can be connected to the OPC server such as FA-Server4.0 (made by Roboticsware, Inc.) to monitor the data via the
218IF-01 Ethernet port. Contact Roboticsware, Inc. for more information (http://www.roboticsware.co.jp/index.htm).

Names and Models of Cables

No. Name Model Length m
1 RS-232C Communication Cable JEPMC-W5311- -E 2.5 / 15.0
2 I/O Cable for LIO-04 and DO-01 JEPMC-W6060- -E 0.5 / 1.0 / 3.0
3 EXIOIF Cable JEPMC-W2091- 0.5 / 1.0 / 2.5
4 USB Cable Use a USB cable.
5 Ethernet Communication Cable Use 10BASE-T cross or straight cables.
JEPMC-W2040- 0.5 / 1.0 / 3.0
6 Connection Cable for SVA-01
JEPMC-W2041- 0.5 / 1.0 / 3.0
JEPMC-W6002- 0.5 / 1.0 / 3.0 / 5.0 / 10.0 / 20.0 / 30.0 / 40.0 / 50.0
7 MECHATROLINK- Cable
JEPMC-W6003- 0.5 / 1.0 / 3.0 / 5.0 / 10.0 / 20.0 / 30.0 / 40.0 / 50.0
8 I/O Cable for PO-01 JEPMC-W6060- 0.5 / 1.0 / 3.0
9 I/O Cable for CNTR-01 JEPMC-W2063- -E 0.5 / 1.0 / 3.0
36
MECHATROLINK- System Configuration for MP2500M

Host Communication by Ethernet, etc.

MECHATROLINK- (10 Mbps)

SGDV SGDV SGDV A1000 MYVIS YV250/

1 ms: 9 stations max. YV260
2 ms: 21 stations max.
= a number of servo
axes (16 axes max.)
+ a number of I/O
stations I/O
Series Direct-drive Linear Series Inverter Drive
Series Cameras
AC Servo Drives

MECHATROLINK- (10 Mbps)

0.5 ms : 4 stations max. SGDV SGDV SGDV A1000 MYVIS YV250/

YV260
1.0 ms : 9 stations max.
1.5 ms : 15 stations max.
2.0 ms : 21 stations max.
= a number of servo axes
(16 axes max.)
+ a number of I/O I/O
stations Series Direct-drive Linear Series Inverter Drive
Series Cameras
AC Servo Drives

MECHATROLINK- System Configuration for MP2100M

Host Communication by Ethernet, etc.

1 ms: 9 stations max.
2 ms: 21 stations max.
= a number of servo axes (16 axes max.)
MECHATROLINK- (10 Mbps) + a number of I/O stations
PC SGDV SGDH SGDV SGDV
+

System Configurations
MP2100M
(4 boards NS115
can be connected.)
Remote I/O

Motion API
MPE720 Integrated
Engineering Tool
Series Series Linear Series Direct-drive
Series
AC Servo Drives

SVB Board Side: MECHATROLINK- (10 Mbps)

0.5 ms : 4 stations max.
1.0 ms : 9 stations max. SGDV SGDH SGDV SGDV
1.5 ms : 15 stations max. +
NS115
2.0 ms : 21 stations max.
= a number of servo axes
(16 axes max.) Remote I/O
+ a number of I/O
stations
Note : 0.5 ms and 1.5 ms are not
available for the servo drives
(SGDH SERVOPACK with Series Series Linear Series Direct-drive
NS115 application module) Series
in the series. AC Servo Drives

37
 MECHATROLINK- System Configuration for MP2200
An example of how the optional module can be connected is shown. Each connection is marked by a number.
Refer to that number in the table to see the cable specifications for that specific connection.

MP2200 CPU-02 218IF-01 SVA-01 SVC-01 PO-01 LIO- 04 DO- 01 CNTR-01 EXIOIF

MP2200 217IF-01218IF-01 SVA-01 SVB-01 PO-01 LIO-04 DO-01 CNTR-01 EXIOIF

MPE720 2 MP2200 Base Unit

-installed PC

3 MECHATROLINK- (100 Mbps)

Hub Module Hub
Module

SGDV SGDV SGDV Remote I/O 0.125 ms : 4 stations max.

0.25 ms : 8 stations max.
0.5 ms : 14 stations max.
Series Direct-drive Linear Series 1 ms : 21 stations max.
Series = a number of servo axes
AC Servo Drives (16 axes max.)
+ a number of I/O
3 MECHATROLINK- (100 Mbps) stations

SGDV SGDV SGDV

Direct-drive Linear Series Remote I/O

Series
Series
AC Servo Drives

Names and Models of Cables

No. Name Model Length m
1 EXIOIF Cable JEPMC-W2091- 0.5 / 1.0 / 2.5
2 USB Cable Use a USB cable.
0.2 / 0.5 / 1.0 / 2.0 / 3.0 / 4.0 / 5.0 /
JEPMC-W6012- -E
10 / 20 / 30 / 50
3 MECHATROLINK- Cable
JEPMC-W6013- -E 10 / 20 / 30 / 50 / 75
JEPMC-W6014- -E 0.5 / 1.0 / 3.0 / 5.0 / 10 / 30 / 50

38
MECHATROLINK- System Configuration for MP2101TM

Host Communication by Ethernet, etc.

MECHATROLINK- (100 Mbps)

PC Hub Module
MP2101TM
(4 boards can be
connected.)

Remote I/O Hub Module

Motion API SGDV SGDV SGDV
MPE720 Integrated
Engineering Tool

Series Direct-drive Linear Series

Series
AC Servo Drives

MECHATROLINK- (100 Mbps)

SGDV SGDV SGDV

Remote I/O

Series Direct-drive Linear Series

Series
AC Servo Drives

System Configurations

39
 Hardware Specifications

Specifications

MP2100 (M) MP2200

MP2101 (M)
MP2101T (M)

Controller

Controller Type Board Type Module Type

Speed Comparison of CPU Module 1.5 to 3.0

1.5
(when compared to the MP2300) (CPU-01/02/03/04)

MP2100: 1.0 ms
MP2100M: 0.5 ms
Minimum Scanning Time 0.5 ms
MP2101 (M): 0.5 ms
MP2101T (M): 0.5 ms

Number of Controlled Axes 16/32 axes 256 axes

Available User Program Memory 5.5 MB/11.5 MB 7.5 MB/11.5 MB
Motion Control M-2，M-3 Special orders only

Host Controller Ethernet (100 Mbps)

Built-in CPU −
Interface (Only available for CPU-03 and CPU-04)
Functions
Digital Input: 5 points,
I/O −
Digital Output: 4 points

Ladder Language
Programming Motion Language
API −

Control for Positioning,

Speed and Torque

Control Interpolation Control

Functions Phase Control

Electronic Cam and

Shaft Control

M-2 MP2100 (M)，MP2101 (M) (Special orders only)

Motion Control M-3 MP2101T (M) (Special orders only)

Interface Pulse Train − (Special orders only)

Analog Voltage − (Special orders only)

Note: M-2 stands for MECHATROLINK-2 and M-3 for MECHATROLINK-3.

40
 MP2000 Series Machine Controller

MP2300 MP2310 MP2300S MP2400 MP2500

All-in-one Type Compact Unit Type Panel Type

1.0 1.5 1.5 1.5 1.5

MP2500: 1.0 ms
1.0 ms 0.5 ms 0.5 ms 1.0 ms
MP2500M: 0.5 ms

48 axes 64 axes 32 axes 16 axes 16/32 axes

5.5 MB 7.5 MB 5.5 MB 5.5 MB 5.5 MB
M-2 M-2 M-2 M-2 M-2

− Ethernet (100 Mbps) Ethernet (100 Mbps) Ethernet (100 Mbps) −

Digital Input: 8 points, Digital Input: 5 points,

− − −
Digital Output: 4 points Digital Output: 4 points

− − − −

Hardware Specifications
−

(Special orders only) (Special orders only) (Special orders only) − −

(Special orders only) (Special orders only) (Special orders only) − −
(Special orders only) (Special orders only) (Special orders only) − −

41
 Hardware Specifications

General Specifications [MP2000 Series excluding MP2500 (B) and MP2500M (B)]

Items Specifications Items Specifications

Ambient Operating Temperature 0˚C to +55˚C*
Conforming to JIS B3502
Ambient Storage Temperature − 25˚C to +85˚C
Environmental

Frequency: 16.7 Hz

Operating Conditions
Conditions

Ambient Operating Humidity 30% to 95%RH (non-condensing) Vibration acceleration: 14.7 m/s2
Ambient Storage Humidity 5% to 95%RH (non-condensing) 2 hours in each direction (X, Y, and Z)

Mechanical
Vibration
Pollution Level 1 (Conforming to JIS B3501) Resistance Frequency: 10 Hz to 57 Hz
Corrosive Gas No combustible or corrosive gas Vibration amplitude: Single-amplitude of 0.075 mm
Operating Altitude 2,000 m above sea level or lower Frequency: 57 Hz to 150 Hz
Vibration acceleration: a fixed acceleration of 9.8 m/s2
Conforming to EN61000-6-2, EN55011
Electrical Operating

(Group 1, Class A) Peak acceleration of 147 m/s2 (15 G) twice for

Conditions

Shock
Power supply noise (FT noise):
Noise Resistance Resistance 11 ms in each direction (X, Y, and Z)
2 kV or larger for 1 min.
Ground to 100 Ω or less

Requirements
Ground

Installation
Radiation noise (FT noise):
1 kV or larger for 1 min. Cooling Method Natural cooling

* : If using the PO-01 or CPU-03 module, an operating temperature of 0˚C to +50˚C is required.
Machine Controller Main Units
MP2100 (M), MP2101 (M), MP2101T (M) Boards

MP2100/MP2101 Board MP2100M/MP2101M Board MP2101T Board MP2101TM Board

Model: JAPMC-MC2100-E, Model: JAPMC-MC2140-E, Model: JAPMC-MC2102T-E Model: JAPMC-MC2142T-E
JAPMC-MC2102-E JAPMC-MC2142-E Approx. Mass: 150 g Approx. Mass: 245 g
Approx. Mass: 135 g Approx. Mass: 210 g

Specifications
Items
MP2100 MP2101 MP2100M MP2101M MP2101T MP2101TM
Power Supply Input supply voltage: 5 VDC ± 5%
Dimensions 106.69 × 174.63 mm (Half the size of a standard PCI)
Network MECHATROLINK-2 MECHATROLINK-3
Motion Transmission Speed 10 Mbps 100 Mbps
Network Max. Number of Stations Twenty-one stations, including servo drives and I/O equipment, can be connected per circuit. (16 axes for servo drives)
Number of Circuits 1 2 1 2
Available User Program
5.5 MB 11.5 MB 5.5 MB 11.5 MB 11.5 MB
Memory
Digital input: 5 points (One point can be used for interrupts), 24 VDC, 4 mA, and source mode or sink mode input
I/O Signals
Digital output: 4 points, 24 VDC, 100 mA, open collector, and sink mode output

Host Computer Specifications

Items Specifications
Model PC/AT compatible (excluding NEC 9800 series)
CPU Pentium 200 MHz or more (Pentium 400 MHz or more recommended)
Memory Capacity 64 MB or more
Free Hard Space 500 Mbytes min.
Hardware
Display Resolution 800 × 600 or more (1024 × 768 recommended)
Expansion Slot*1 Half the size of a standard PCI slot
Interrupts*1 First-level use (IRQ sharing is possible.)
I/O Memory*1 32 kB shared memory used
OS*2 Windows 2000 Professional SP1 or later, Windows XP, Windows Vista, Windows 7
Web Browser Microsoft IE 5.5 SP2 or later
Microsoft Visual C/C++6.0 SP5 or later, Microsoft Visual Basic6.0 SP5 or later,
Software Microsoft Visual C++ .NET2003, Microsoft Visual Basic .NET2003,
Language Microsoft Visual C++ .NET2005, Microsoft Visual Basic .NET2005,
Microsoft Visual C++ .NET2008, Microsoft Visual Basic .NET2008，
Microsoft Visual C++ .NET2010, Microsoft Visual Basic .NET2010

* 1: These specifications are applicable if using an MP2100, MP2101, or MP2101T board. If using two or more boards in the same host
personal computer, the resources to which the number of boards was applied are needed for the above-mentioned specifications.

42 * 2: Only 32-bit versions

 MP2000 Series Machine Controller

MP2200 Base Units

Specifications
Items
JEPMC-BU2200 (MBU-01) JEPMC-BU2210 (MBU-02) JEPMC-BU2220-E (MBU-03)
Input power voltage: Input power voltage: Input power voltage:
85 VAC to 276 VAC 24 VDC ± 20% 24 VDC ± 20%
Current consumption: Current consumption: Current consumption:
1.5 A or less with I/O rating 3.0 A or less with I/O rating 1.0 A or less with I/O rating
Model: JEPMC-BU2200 Power Supply Inrush current: Inrush current:
Inrush current:
Approx. Mass: 665 g 40 A or less when completely 30 A or less when completely 30 A or less when completely
Model: JEPMC-BU2210 discharged, 275 VAC input, discharged, output rating discharged, output rating
Approx. Mass: 520 g output rating Allowable power loss time: 1 ms Allowable power loss time: 1 ms
Allowable power loss time: 20 ms
Motion Network Not available for the base unit
I/O Signals Not available for the base unit
Slot for Optional Modules 9 slots 4 slots
Expansion Configuration Maximum of 4 base units can be connected using the EXIOIF.
Dimensions (mm) 240 (W) × 130 (H) × 108 (D) 120 (W) × 130 (H) × 108 (D)
Model: JEPMC-BU2220-E
Approx. Mass: 500 g

MP2300 and MP2310 Basic Modules

Specifications
Items
MP2300 MP2310
Input power voltage: 24 VDC ± 20% Current consumption: 1 A
Power Supply
Inrush current: 40 A or less Allowable power loss time: 2 ms
One circuit for MECHATROLINK-2: 21 stations, including servodrives and I/O devices, can be connected.
Model: JEPMC-MP2300 (Maximum 16 axes for servodrives)
Approx. Mass: 500 g Motion Network
Transmission speed: 10 Mbps (MECHATROLINK-2)
Transmission distance: See“MECHATROLINK-2 Repeater”on page 57.
Communication Port 1 Not available for the basic module Ethernet: 100BASE-TX/10BASE-T, 1 port
Digital input: 8 points (One point can be used
for interrupts), 24 VDC, 4 mA, and
I/O Signals source mode or sink mode input Not available for the basic module
Digital output: 4 points, 24 VDC, 100 mA,open
Model: JEPMC-MP2310-E collector, and sink mode output
Approx. Mass: 500 g Slot for Optional Modules 3 slots
Dimensions (mm) 120 (W) × 130 (H) × 108 (D)

MP2300S Basic Module

Items Specifications
Input supply voltage: 24 VDC ± 20% Current consumption: 1 A max.
Power Supply
Inrush current: 40 A Allowable power loss time: 2 ms
One circuit for MECHATROLINK-2 : 21 stations, including servodrives and I/O devices, can be connected.
(Maximum 16 axes for servodrives)
Motion Network Hardware Specifications
Transmission speed: 10 Mbps (MECHATROLINK-2)
Transmission distance: See“MECHATROLINK-2 Repeater”on page 57.
Model: JEPMC-MP2300S-E Communications Port Ethernet: 100BASE-TX/10BASE-T, one port
Approx. Mass: 390 g I/O Signals Input: None Output: CPU Ready status output (relay output)
Slot for Optional Modules 1 slot
Dimensions (mm) 64 (W) × 130 (H) × 108 (D)

MP2400
Items Specifications
Input supply voltage: 24 VDC ± 20% Current consumption: 1 A max.
Power Supply
Inrush current: 40 A Allowable power loss time: 2 ms
One circuit for MECHATROLINK-2 : 21 stations, including servodrives and I/O devices, can be connected.
(Maximum 16 axes for servodrives)
Motion Network
Transmission speed: 10 Mbps (MECHATROLINK-2)
Transmission distance: See“MECHATROLINK-2 Repeater”on page 57.
Model: JEPMC-MP2400-E Communications Port Ethernet : 100BASE-TX/10BASE-T, one port
Approx. Mass: 350 g I/O Signals Input: None Output: CPU Ready status output (relay output)
Slot for Optional Modules None
Dimensions (mm) 45 (W) × 130 (H) × 108 (D) 43
 Hardware Specifications

MP2500, MP2500M, MP2500B, MP2500MB

Model : J E P M C - M P 2 5 -N -E

Board type (with PCI slot) Panel computer specifications

0 : Motion board with one P0 : Panel-integrated type with
MECHATROLINK-2 port 15-inch display screen
4 : Motion board with two CPU: Celeron M, 1.86 GHz
MECHATROLINK-2 ports Memory: 512 Mbytes
Panel-integrated type
:
P1 Panel-integrated type with
Expansion board type (Option) 12.1-inch display screen
0 : Without expansion board CPU: Celeron M, 1.86 GHz
E : EXIOIF Memory: 512 Mbytes
(for panel-integrated type only) B0 : Panel-separated type
U : Optional module mounting unit CPU: AMD Geode LX800, 500 MHz
Panel-separated type (for panel-separated type only) Memory: 512 Mbytes

Electrical Specifications
Items Panel Integrated: JEPMC-MP25 -NP -E Panel Separated: JEPMC-MP25 -NB0-E
Rated Voltage 100 V/240 VAC 24 VDC
Allowable Voltage Range 85 VAC to 264 VAC 24 VDC ± 10%
Power Supply

Rated Frequency 50/60 Hz −

Allowable Frequency Range 47 Hz to 63 Hz −
Allowable Momentary 1 cycle max.
−
Power Loss Time (Interval are 1 s or more.)
Power Consumption 145 VA max. 23 W max.
Inrush Current 40 A max. 1 A max.
1500 VAC 20 mA for one minute
Dielectric Strength −
(between live part terminal and FG terminal)
500 VDC 10 M Ω min.
Insulation Resistance −
(between live part terminal and FG terminal)

Environmental Specifications
Panel Separated: JEPMC-MP25 -NB0-E
Items Panel Integrated: JEPMC-MP25 -NP -E Optional Panel for Separated Panel:
JEPMC-OP25PNL- -E
Ambient Operating Temperature 0˚C to +50˚C 0˚C to +40˚C
Physical Environment

Ambient Storage Temperature − 20˚C to +60˚C − 10˚C to +50˚C

Ambient Operating
10% to 90%RH (with no condensation) 30% to 85%RH (with no condensation)
/Storage Humidity
Dust There must be no dust. There must be no dust.
Corrosive Gas There must be no corrosive gas. There must be no corrosive gas.
Electrical Operation Conditions Mechanical Operation Conditions

Compliance with JIS B 3502.

Compliance with JIS B 3502, IEC/EN 61131-2.
Vibration amplitude and acceleration
5 Hz to 9 Hz :
10 Hz Frequency < 57 Hz :
Single amplitude of 3.5 mm
Vibration Single amplitude of 0.075 mm
9 Hz to 150 Hz :
Resistance 57 Hz Frequency < 150 Hz :
A constant acceleration of 9.8 m/s2
A constant acceleration of 9.8 m/s2
In each X, Y and Z direction
In each X, Y, and Z direction
10 cycle 100 min. each
Sweep rate (1 octave/min) × number of sweeps (10)
Compliance with EN55011 Group 1 Class A
Voltage noise : 1500 VP-P Power supply noise (FT noise) :
Noise
Pulse width : 50 ns, 500 ns, 1μs 2 kV or larger for 1 min.
Resistance
Rise time : 1 ns (Noise simulator) Radiation noise (FT noise) :
1 kV or larger for 1 min.
Electrostatic Resistance Contact discharge method 6 kV Compliance with EN 61000-4.2 ± 6 kV
Discharging (IEC/EN 61000-4-2 level 3) (direct contact) , ± 8 kV (under ground)

Structural Specifications
Panel Integrated: Panel Separated: Optional panel for Separated Panel:
Items
JEPMC-MP25 -NP -E JEPMC-MP25 -NB0-E JEPMC-OP25PNL- -E
Protective ground: Ground to 100 Ω max. Protective ground: Ground to 100 Ω max.
Ground
Functional ground: Ground to 100 Ω max. Functional ground: Ground to 100 Ω max.
Protected structure: Equivalent to IP65f* (Applicable
Installation method
Protective Structure and to the front side of the panel when embedded and Installation method:
Installation with a PC box: Embedded
Installation only when the front USB is not used.) Installation without embedding
When only a panel: Embedded
44 Installation method: Embedded
 MP2000 Series Machine Controller

Cooling Method Cooling fans Self-cooling

15-inch model 10.4-inch panel
JEPMC-MP25 -NP0-E: 12 kg Without optional slot: 1.9 kg JEPMC-OP25PNL-10-E: 1.82 kg
Mass
12-inch model With optional slot: 2.1 kg 12.1-inch panel
JEPMC-MP25 -NP1-E: 8 kg JEPMC-OP25PNL-12-E: 2.2 kg
＊ : The degree of protection applies to the front of the product when it is installed in a solid panel. Although the front of the product has been tested under
conditions equivalent to those listed in the specifications, this does not mean that the product will meet these specifications under all conditions. Before
installing the product, check the product’ s performance under conditions that will reflect its actual operating environment.

Hardware Specifications
Items Panel Integrated: JEPMC-MP25 -NP -E Panel Separated: JEPMC-MP25 -NB0-E
Display 15-inch XGA TFT 1024 × 768, 12.1-inch SVGA 800 × 600 12.1-inch SVGA 800 × 600, 10.4-inch SVGA 800 × 600
CPU Celeron M 440, 1.86 GHz AMD Geode LX800, 500 MHz
Main Memory 512 Mbytes 512 Mbytes
Disk CF card: 2 Gbytes, Free space: approx. 700 Mbytes CF card: 2 Gbytes, Free space: approx. 700 Mbytes
Video Memory 64 Mbytes, 260,000 colors 64 Mbytes, 260,000 colors
Serial RS-232C: 4 ports (One of these ports can be used to switch to RS-422/RS485) Option: Two RS-232C ports
Panel Computer

USB USB: 5 ports (1 on the front, 4 on the back) USB: 4 ports

LAN 10/100BASE: 1 channel, 10/100/1000BASE: 1 channel, automatic switching 10/100BASE: 1 channel
Sound Speaker output: 1 port Speaker output: 1 port
Expansion Slot One spare PCI slot No spare slot
Compatible OS WindowsXP Embedded WindowsXP Embedded
Ambient Operating Temperature 0 to +50˚C 0 to +40˚C
Operating Environment IP65 −
Power Supply 100/240 VAC (50/60 Hz) 24 VDC
Cooling Method Cooling fan Natural cooling
RAS (Reliability, Availability, and Serviceability) functions (power
Diagnostic Functions −
supply voltage, cooling fan, watchdog, touch panel, etc.)
MECHATROLINK-2 (One circuit with MP2500/MP2500M, two circuits with MP2500M/MP2500MB)
Motion Board

Motion Network
Up to 21 stations, including servo drives and I/O devices, can be connected per circuit. (16 axes max. for servo drives)
Digital input : 5 points (one of these is also used for interrupt.), 24 VDC, 4 mA
I/O Signals
Digital output : 4 points, 24 VDC, 100 mA, open-collector, and sink mode output

MP
CPU Module Applicable Models: 2200

MP2200 CPU Module (CPU-01/CPU-02/CPU-03/CPU-04/MPU-01)

Hardware Specifications

CPU-01 Module CPU-02 Module CPU-03 Module CPU-04 Module MPU-01 Module
Model: JAPMC-CP2200 Model: JAPMC-CP2210 Model: JAPMC-CP2220-E Model: JAPMC-CP2230-E Model: JAPMC-CP2700-E
Approx. Mass: 66 g Approx. Mass: 75 g Approx. Mass: 86 g Approx. Mass: 86 g Approx. Mass: 86 g

Specifications
Items
CPU-01 CPU-02 CPU-03 CPU-04 MPU-01
Max. Number of
256 axes 16 axes
Controlled Axes
High-speed Scan 0.5 ms to 32.0 ms (in units of 0.5 ms) 0.25 ms, 0.5 ms to 32.0 ms (in units of 0.5 ms)
Low-speed Scan 2.0 ms to 300.0 ms (in units of 0.5 ms) 2.0 ms to 300.0 ms (in units of 0.5 ms)
User Memory Capacity 7.5 Mbytes 11.5 Mbytes 11.5 Mbytes
1 slot for Compact Flash card − −
Expansion Ports −
1 port for USB 1 port for Ethernet −
Notes: 1 Not applicable to multiple CPU system
2 An MPU-01 module must be used with an MP2000 board [MP2100M, MP2101(M), or MP2101T(M)] or a CPU module with a
built-in Ethernet port (MP2310, MP2300S, CPU-03, or CPU-04).

45
 Hardware Specifications

Connection Module

Expansion Interface Module (EXIOIF) Expansion Interface Board (MP2100MEX)

MP MP MP
Applicable Model: 2200 Applicable Model: 2100M 2500M

Items Specifications Items Specifications

Number of Number of
4 racks max. 3 racks max.
Expansion Racks Expansion Racks
Automatically Rack No. Automatically identified
Rack No.
identified Current Approx. 650 mA at 5 V
Consumption supplied by PCI bus.
Model: JAPMC-EX2200 Model: JAPMC-EX2100
Approx. Mass: 80 g Approx. Mass: 90 g

MP MP MP MP
Communication Modules Applicable Models: 2200 2300 2310 2300S

General-purpose Serial Communication Module (217IF-01)

For RS-232C Communication
Items Specifications
Interface One port
Connector D-sub 9 pins (Female)
Max. Transmission Distance 15 m
Max. Transmission Speed 76.8 kbps
Access Mode Asynchronous (Start-stop synchronization)

Model: JAPMC-CM2310 MEMOBUS (Master or Slave), MELSEC (A-compatible 1C frame, type:1),

Communication Protocols
Approx. Mass: 100 g OMRON (only for host mode), Non-procedure
Media Access Control Method 1:1
Data bit length: 7 or 8 bits
Transmission Format
Stop bits: 1 or 2 bits
(Can be set)
Parity bits: Even, odd, or none

For RS-422/485 Communication

Items Specifications
Interface One port (RS-422 or -485)
Connector MDR 14 pins (Female)
Max. Transmission Distance 300 m
Max. Transmission Speed 76.8 kbps
Access Mode Asynchronous (Start-stop synchronization)
MEMOBUS (Master or Slave), MELSEC (A-compatible 1C frame, type:1),
Communication Protocols
OMRON (only for host mode), Non-procedure
Media Access Control Method 1:1 (RS-422), 1: N (RS-485)
Data bit length: 7 or 8 bits
Transmission Format
Stop bits: 1 or 2 bits
(Can be set)
Parity bits: Even, odd, or none

46
 MP2000 Series Machine Controller

Ethernet Communication Module (218IF-01/02)

For Ethernet Communication
Items Specifications
One port (10BASE-T for 218 IF-01, 100BASE-TX/10BASE-T for 218 IF-02)
Interface
(RJ-45 modular jack)
Max. Segment Length 100 m
Transmission Speed 218IF-01: 10 Mbps, 218IF-02: 100 Mbps/10 Mbps
Access Mode IEEE802.3
Connections TCP/UDP/IP/ARP/ICMP
218IF-01 Module
Model: JAPMC-CM2300 Max. Number of Words in Transmission 218IF-01: 510 words, 218IF-02: 2044 words
Approx. Mass: 90 g Extended MEMOBUS, MEMOBUS, MELSEC (A-compatible 1C frame, type:1),
Communication Protocols
Non-procedure, MODBUS/TCP
Max. Number of Connections 20 stations

For RS-232C Communication

Items Specifications
Interface One port
Connector D-sub 9 pins (Female)
Max. Transmission Distance 15 m
Max. Transmission Speed 19.2 kbps (Using 218IF-01), 115.2 kbps (Using 218IF-02)
Access Mode Asynchronous (Start-stop synchronization)
218IF-02 Module
Model: JAPMC-CM2302-E MEMOBUS (Master or Slave), MELSEC (A-compatible 1C frame, type:1),
Communication Protocols
Approx. Mass: 90 g OMRON (only for host mode), Non-procedure
Media Access Control Method 1: 1
Data bit length: 7 or 8 bits
Transmission Format
Stop bits: 1 or 2 bits
(Can be set)
Parity bits: Even, odd, or none

DeviceNet Communication Module (260IF-01)

For DeviceNet Communication
Items Specifications
Number of Circuits 1
Conforms to DeviceNet
Applicable Communication I/O transmission (polled I/O and bit-strobed I/O)
Explicit messaging
I/O Max. Number of Slaves 63 nodes
Communication Max. I/O Bytes 1024 bytes, 256 bytes per node
Model: JAPMC-CM2320
Approx. Mass: 90 g Max. Number 63 nodes
Message of Nodes Synchronous communications possible: 8 nodes
Communication
(Only for Master) Max. Message Length 256 bytes
Executed Functions MSG-SND function
Two rotary switches: Node address settings
Switches on the Front Hardware Specifications
DIP switch: Settings for transmission speed and switching master or slave
Indicators 2 LEDs: MS and NS
Power Voltage for Communication 24 VDC ± 10% (Using the specially designed cable)
Max. Current Consumption Communication power: 45 mA (Supplied by transmission connectors)

For RS-232C Communication

Items Specifications
Interface One port
Connector D-sub 9 pins (Female)
Max. Transmission Distance 15 m
Max. Transmission Speed 19.2 kbps
Access Mode Asynchronous (Start-stop synchronization)
MEMOBUS (Master or Slave), MELSEC (A-compatible 1C frame, type:1),
Communication Protocols
OMRON (only for host mode), Non-procedure
Media Access Control Method 1:1
Data bit length: 7 or 8 bits
Transmission Format
Stop bits: 1 or 2 bits
(Can be set)
Parity bits: Even, odd, or none

47
 Hardware Specifications

PROFIBUS Communication Module (261IF-01)

For PROFIBUS Communication
Items Specifications
Functions DP slave, Cyclic communication (DP standard function)
12 M/6 M/4 M/3 M/1.5 M/750 k/500 k/187.5 k/93.75 k/19.2 k/9.6 kbps
Transmission Speed
(Automatic detection)
Configuration By PROFIBUS Master
Slave Address 1 to 64
Total capacity of IW/OW registers: 64 words
Model: JAPMC-CM2330 I/O Processing
Max. I/O allocation (IN and OUT each): 64 words
Approx. Mass: 90 g
Display for status and slave status using the EWS.
Diagnostic Functions
I/O error display for SW registers.

For RS-232C Communication

Items Specifications
Interface One port
Connector D-sub 9 pins (Female)
Max. Transmission Distance 15 m
Max. Transmission Speed 19.2 kbps
Access Mode Asynchronous (Start-stop synchronization)
MEMOBUS (Master or Slave), MELSEC (A-compatible 1C frame, type:1),
Communication Protocols
OMRON (only for host mode), Non-procedure
Media Access Control Method 1:1
Data bit length: 7 or 8 bits
Transmission Format
Stop bits: 1 or 2 bits
(Can be set)
Parity bits: Even, odd, or none

FL-net Communication Module (262IF-01)

For 262IF-01 Communication
Items Specifications
Interface 100BASE-TX 10BASE-T
Transmission Mode Full duplex or half duplex
Transmission Transmission Speed 100 Mbps 10 Mbps
Specifications*1 Max. Segment Length 100 m between hub and nodes if UTP cables are used
Connector RJ-45 connector
Auto Negotiation Supported (Transmission speed and communication mode cannot be fixed. )
Model: JAPMC-CM2303-E
Approx. Mass: 80 g Max. Number of 254 nodes max. if repeaters are used
Nodes (Only 64 nodes, including the local node, can be allocated.)*2
FL-net Transmission

Cyclic
Communication Max. data size within network
Specifications Area 1 (Bit data) : 8 kbits Area 2 (Word data) : 8 kwords
Data Size
Max. data size per station (node)
Area 1 + Area 2 : 8 kbits + 8 kwords can be allocated.
Media Access Control Method N:N
Number of Message Channels 10
Engineering Communication None
Read Word Block, Write Word Block, Read Network
Message
Parameter, Write Network Parameter*3，Change Other Node
Communication
Message Service to Stop Mode*3, Change Other Node to Run Mode*3, Read
Specifications
Profile, Transmissive Message, Read Log Data, Clear Log
Data, Return Message
Number of Transmission Words 512 words max.

* 1 : Conforms to Ethernet specifications

* 2 : The number of nodes that the 262 IF -01 can allocate to I/O is limited to 64 , including the local node, in
accordance with the specifications of the MP series Machine Controllers.
* 3 : Supported by client nodes only. (In FL-net communications, the node sending data is called the client, and the
node receiving data is called the server.)

48
 MP2000 Series Machine Controller

EtherNet / IP Communication Module (263IF-01)

For 263IF-01 Communication
Items Specifications
Interface 100BASE-TX 10BASE-T
Transmission Mode Full duplex or half duplex
Transmission Transmission Speed 100 Mbps 10 Mbps
Specifications*1 Max. Segment Length 100 m between hub and nodes if UTP cables are used
Connector RJ-45 connector
Auto Negotiation Supported Transmission speed and communication mode cannot be fixed.)
(
Model: JAPMC-CM2304-E
Approx. Mass: 80 g Max. Number of Connectable 64 units (Does not include the devices used for explicit message
EtherNet / IP Transmission

I/O Devices communication)*2

I/O Max. Number of I/O Bytes within the network
Communication Max. Number of Inputs/outputs : 8192 bytes each per system
Specifications I/O Bytes (Total number of bytes of I/O data exchanged among all connected devices)
Inputs/outputs : 500 bytes each per device
Communication Mode Scanner and adapter
Max. Number of Connectable Devices
64 units (Number of devices that can communicate simultaneously : 10)*2
for Explicit Message Communication
Explicit Number of Message Channels 10
Message Max. Number of
504 bytes
Communication Message Bytes
Specifications Communication Mode Client and server
Unconnected type (UCMM)
Connection Type
When the module functions as a server, connected type (class 3) is also supported.

*12 :: Conforms to Ethernet specifications

* Max. Number of connectable devices is based on the specifications of the MP series Machine Controllers.
EtherCAT Communication Module (264IF-01)
For 264IF-01 Communication
Items Specifications
Transmission Mode Full duplex
Transmission Speed 100 Mbps
Distance between Nodes 100 m
Connector RJ-45 connector, 2 ports (1 circuit)
Transmission
CAT 5e STP cable
Specifications Cable
Straight or cross cable
Model : JAPMC-CM2305-E
EtherCAT Transmission

Approx. Mass : 100 g Topology Line topology (structure)

Functions As a slave station of EtherCAT
Address Automatic allocation by Master
EtherCAT standard
Supported Protocol
(Protocols such as CoE, SoE, and VoE are not supported.)
Process Data Input data : 198 words max.
Communications Data Size Output data : 198 words max. Hardware Specifications
(Cyclic) Input data + Output data : 200 words max. in total
Media Access Control Method Between master and slave (1 : 1)
Communication Cycle According to the configuration of Master
Mailbox Supported Protocol EtherCAT standard (Protocols such as CoE, EoE, FoE, SoE, and VoE are not supported.)
Communication System message only (Cannot use user messages such as
(Message) Message Service
read/write memory.)

49
 Hardware Specifications

CompoNet Communication Module (265IF-01)

For CompoNet Communication
Items Specifications
Number of Circuits 1
Applicable Communication I/O communication, message communication
Transmission Speed 4 Mbps，3 Mbps，1.5 Mbps，93.75 kbps
Master/Slave Master
Up to 64 units can be connected in one network.
Conditions of Use for Repeater Units Lines can be extended a maximum of two levels from the master unit
Model: JAPMC-CM2390-E using repeater units.
Approx. Mass: 80 g Max. Number of Slaves 384 nodes
I/O Communication
Max. I/O Bytes 32 bytes per node
384 nodes
Max. Number of Nodes
Message Synchronous communications possible: 10 nodes
Communication Max. Message Length 256 bytes
Executed Functions MSG-SND function
Switches on the Front DIP switch: Transmission speed
Indicators 4 LEDs: MS，NS，TX，RX
Power Voltage for Communication 24 VDC ± 10% (Using the specially designed cable)

MPLINK Communication Module (215AIF-01 MPLINK)

For MPLINK Communication
Items Specifications
Transmission Method MPLINK
Interface One port
Connector USB port with T-branch connector*
Cable MECHATROLINK cable (JEPMC-W6002- )
Transmission Speed 10 Mbps
50 m: 16 stations
Max. Transmission
100 m: 32 stations
Distance
(With MECHATROLINK-2 JEPMC-REP2000 repeater)
Model: JAPMC-CM2360 Max. Number of Words 4096 words per circuit.
Approx. Mass: 130 g in Link Transmission 1024 words per station.
Media Access Control Method N:N
Max. Number of Connecting Stations 16 stations (32 stations with repeater)
Relay Function Available

* : A T-branch connector is included in the package. Spares can also be ordered separately. (Model: JEPMC-OP2310-E)

For RS-232C Communication

Items Specifications
Interface One port
Connector D-sub 9 pins (Female)
Max. Transmission Distance 15 m
Max. Transmission Speed 19.2 kbps
Access Mode Asynchronous (Start-stop synchronization)
MEMOBUS (Master or Slave), MELSEC (A-compatible 1C frame, type:1),
Communication Protocols
OMRON (only for host mode), Non-procedure
Media Access Control Method 1:1
Data bit length: 7 or 8 bits
Transmission Format
Stop bits: 1 or 2 bits
(Can be set)
Parity bits: Even, odd, or none

50
 MP2000 Series Machine Controller

CP-215 Communication Module (215AIF-01 CP-215)

For CP-215 Communication
Items Specifications
Transmission Method CP-215
Interface One port
Connector USB port with MR connector converter*2
Cable No ready-made cable available. See page 78 for details on cable specifications.
Transmission Speed 2 Mbps / 4 Mbps
Max. Transmission Distance 270 m at 2 Mbps and 170 m at 4 Mbps.
Max. Number of Words 2048 words per circuit.
in Link Transmission 512 words per station.
Model: JAPMC-CM2361*1 Media Access Control Method N:N
Approx. Mass: 130 g Max. Number of Connecting Stations 32 stations (64 stations with repeater)
Relay Function Available

*
1 : Cannot be mounted in the slot to the left of 260IF-01. JAPMC-CM2361 modules cannot be mounted side by side.
*
2 : An MR connector converter is included in the package. Spares can also be ordered separately. (Model: JEPMC-OP2320)

For RS-232C Communication

Items Specifications
Interface One port
Connector D-sub 9 pins (Female)
Max. Transmission Distance 15 m
Max. Transmission Speed 19.2 kbps
Access Mode Asynchronous (Start-stop synchronization)
MEMOBUS (Master or Slave), MELSEC (A-compatible 1C frame, type:1),
Communication Protocols
OMRON (only for host mode), Non-procedure
Media Access Control Method 1:1
Data bit length: 7 or 8 bits
Transmission Format
Stop bits: 1 or 2 bits
(Can be set)
Parity bits: Even, odd, or none

Hardware Specifications

51
 Hardware Specifications

MP MP MP MP
Motion Control Modules Applicable Models: 2200 2300 2310 2300S

MECHATROLINK-2 Motion Control Module (SVB-01)

Items Specifications
Communication Circuits 1 circuit
Communication Ports 2 ports
Terminator External resistor (JEPMC-W6022 required)
Transmission Speed 10 Mbps
Communication Cycle 0.5 ms, 1 ms, 1.5 ms, 2 ms
Number of Connecting 21 stations (16 axes for servo drives) /2 ms, 15 stations (15 axes for servo drives) /1.5 ms,
Stations* 9 stations (9 axes for servo drives) /1 ms, 4 stations (4 axes for servo drives) /0.5 ms
Model: JAPMC-MC2310 Retry Function Available with MECHATROLINK-2
Approx. Mass: 80 g
Slave Function Available with MECHATROLINK-2
Transmission Distance See“MECHATROLINK-2 Repeater”on page 57.

* : MECHATROLINK- 2 (32-byte mode)

MECHATROLINK-3 Motion Control Module (SVC-01)

Items Specifications
Communication Circuits 1 circuit
Communication Ports 2 ports
Terminator Not required
Transmission Speed 100 Mbps
Communication Cycle 125μs，250μs，500μs，1ms
Number of Connecting 21 stations (16 axes for servo drives)/1 ms, 14 stations (14 axes for servo drives) /500μs,
Stations 8 stations (8 axes for servo drives) /250μs, 4 stations (4 axes for servo drives) /125μs
Model: JAPMC-MC2320-E Retry Function Available with MECHATROLINK-3
Approx. Mass: 70 g Slave Function Not available
Transmission Distance Distance between stations : 20 cm to 100 m

Analog Output Motion Control Module (SVA-01)

Items Specifications
Number of Controlled Axes 2
Analog Output 2 channels/1 axis, − 10 V to +10 V, 16-bit D/A
Analog Input 2 channels/1 axis, − 10 V to +10 V, 16-bit A/D
Pulse Input 1 channel/1 axis, 5-V differential inputs, phase A/B pulse, and 4 Mpps (16 Mpps with 4 multipliers)
Input Signals 6 points/1 axis, 24 VDC, 4 mA, and source mode or sink mode input
Output Signals 6 points/1 axis, 24 VDC, 100 mA, open collector, and sink mode output

Model: JAPMC-MC2300
Approx. Mass: 100 g

Pulse Output Motion Control Module (PO-01)

Items Specifications
Number of Controlled Axes 4
Output Method : CW/CCW, sign + pulse, and phase A/B
Maximum Frequency : 4 Mpps with CW/CCW or sign + pulse, 1 Mpps with phase A/B
Pulse Output
(before multiplication)
Interface : 5-V differential outputs

5 points × 4 channels, source mode input

Digital Input DI_0 : Separate for each power supply··· 5 V/3.9 mA, 12 V/10.9 mA, 24 V/4.1 mA
Model: JAPMC-PL2310-E DI_1 to DI_4 : Power supply shared ··· 24 V/4.1 mA
Approx. Mass: 100 g
4 points × 4 channels
Digital Output
Open collector (sink mode) output (24 V/100 mA)
Current Consumption 5 V, 1.0 A max.

52
 MP2000 Series Machine Controller

MP MP MP MP
I/O Modules Applicable Models: 2200 2300 2310 2300S

I/O Modules (LIO-01/-02)

Digital I/O for LIO-01/-02 Modules
Items Specifications

16 points (All connected) and 24 VDC ± 20%, 5 mA (TYP)

Sink mode or source mode input and photocoupler isolation
Min. ON voltage/current: 15 V/1.6 mA
Max. OFF voltage/current: 5 V/1.0 mA
Input Signals Max. Response time: OFF ON 1 ms and ON OFF 1 ms
Interruption (DI-00): DI-00 can be used for interruptions. If an interruption is enabled,
LIO-01 Module the interrupt drawing is started when DI-00 is set to ON.
Model: JAPMC-IO2300 Pulse latch (DI-01): DI-01 can be used for pulse latching. If pulse latching is enabled,
Approx. Mass: 80 g the pulse counter is latched when DI-01 is set to ON.

16 points (All connected) and 24 VDC ± 20%, 100 mA max.

Open collector: sink mode output (LIO-01 module)
source mode output (LIO-02 module)
Photocoupler isolation and Max. OFF current: 0.1 mA
Output Signals
Max. Response time: OFF ON 1 ms and ON OFF 1 ms
Output protection： Fuse (for protection against fires caused by an overcurrent when
outputting after a short circuit occurred)
If circuit protection is required, provide a fuse for each output circuit.

LIO-02 Module Pulse Input for LIO-01/-02 Modules

Model: JAPMC-IO2301
Items Specifications
Approx. Mass: 80 g
Number of Channels 1 (Phase A, B, or Z input)
Phase A/B: 5 V differential inputs, no insulation, and max. frequency 4 MHz
Input Circuit
Phase Z: 5 V/12 V photocoupler inputs and max. frequency 500 kHz
Input Method A/B (1,2, or 4 multipliers), sign (1 or 2 multipliers), UP/DOWN (1 or 2 multipliers)
Pulse latch with phase Z or DI-01
Latch Input
Max. Response time: 5 μs when input with phase Z; 60 μs when input with DI-01
Others Coincident detection; Preset and clear functions for counter values

I/O Modules (LIO-04/-05)

Items Specifications
32 points (8 points connected) and 24 VDC ± 20%, 5 mA (TYP)
Sink mode or source mode input and (Points)
35
photocoupler isolation (32 points, 28˚C) (32 points, 41˚C)

Min. ON voltage/current: 15 V/1.6 mA 30

Input voltage
Max. OFF voltage/current: 5 V/1.0 mA 25 24 VDC
Input on Points

Input voltage
Max. Response time: OFF ON 0.5 ms and 20 28.8 VDC

ON OFF 0.5 ms (16 points, 55˚C) Hardware Specifications

Input Signals 15
Interruption (DI-00, DI-01, DI-16, DI-17):
LIO-04 Module 10 (10 points, 55˚C)
Model: JAPMC-IO2303 DI-00, DI-01, DI-16, and DI-17 can be used
5
Approx. Mass: 80 g for interruptions. If an interruption is enabled,
the interrupt drawing is started when DI-00, 0 10 20 30 40 50 60 (˚C)
DI-01, DI-16, or DI-17 is set to ON. Ambient Temperature

Number of Input ON Points,

Note: See right for the derating conditions. Temperature Derating

32 points (8 points connected) and 24 VDC ± 20%, 100 mA max.

Open collector: sink mode output (LIO-04 module), source mode output (LIO-05 module)
Photocoupler isolation and Max. OFF current: 0.1 mA
Output Signals Max. Response time: OFF ON 0.5 ms and ON OFF 1 ms
Output protection: Fuse (for protection against fires caused by an overcurrent when
outputting after a short circuit occurred)
LIO-05 Module
If circuit protection is required, provide a fuse for each output circuit.
Model: JAPMC-IO2304
Approx. Mass: 80 g

53
 Hardware Specifications

I/O Module (LIO-06)

LIO-06 Module Specifications
Items Specifications
Number of Input Points 8
Input Method Sink mode/source mode
Digital Input ON Voltage/Current 15 VDC min./2 mA min.
Signals OFF Voltage/Current 5 VDC max./1 mA max.
Max. Response Time OFF ON: 0.5 ms max., ON OFF: 0.5 ms max.
Number of Common Points 1
Model: JAPMC-IO2305-E Number of Output Points 8
Approx. Mass: 80 g Output Method Sink mode
External Voltage 19.2 VDC to 28.8 VDC
Digital Output Output Current 100 mA/point
Signals ON Voltage 1 V max.
Current Leakage while OFF 0.1 mA max.
Max. Response Time OFF ON: 0.25 ms max., ON OFF: 1 ms max.
Number of Common Points 1
Analog Input Range − 10 V to +10 V
Number of Channels 1
Analog Input
Input Impedance Approx. 20 k Ω
Signals
Input Voltage ± 10 V ( ± 31276)
Characteristics Resolution: 16 bits
Analog Output Range − 10 V to +10 V
Analog Output Number of Channels 1
Signals Output Voltage ± 10 V ( ± 31276)
Characteristics Resolution: 16 bits
Number of Channels 1
Counter Mode Reversible counter
A/B Pulse Signal Form 5-V differential input
A/B Pulse Signal Polarity Positive logic/negative logic
Sign (Multiplier: 1 or 2)
Pulse Counter Pulse Counting Methods UP/DOWN (Multiplier: 1 or 2)
A/B pulse (Multiplier: 1, 2, or 4)
Max. Frequency 4 MHz
Number of Latch Input Points Can be selected from two points (Phase-Z latch or DI latch)
Coincidence Detection Function Available (Output terminal: DO_07)
Coincident Interruption Available

54
 MP2000 Series Machine Controller

Output Module (DO-01)

Items Specifications
Number of Output Points 64
Output Method Transistor or open collector: sink mode output
Isolation Photocoupler isolation
Output Voltage 24 VDC (19.2 V to 28.8 V)
Max. Output Current 100 mA
Max. OFF Current 0.1 mA
Max. Response Time OFF ON: 0.5 ms / ON OFF: 1 ms
Model: JAPMC-DO2300 Number of Common Points 8
Approx. Mass: 80 g
Protective Circuit Fuse for common circuits
Fuse Rating 1A
Error Detection Fuse blowout detection

Analog Input Module (AI-01)

Items Specifications
Analog Input Range − 10 V to +10 V 0 mA to 20 mA
Number of Channels 8 [(4 channels/connector) × 2]
Number of Channels to be Used 1 to 8
Isolation Between channels: Not isolated, Between input connector and system power supply: Photocoupler isolation
Max. Rated Input ± 15 V ± 30 mA
Input Impedance 20 k Ω 250 Ω
Resolution 16 bits ( − 31276 to +31276) 15 bits (0 to +31276)
Model: JAPMC-AN2300 Accuracy (0˚C to 55˚C) ± 0.3% ( ± 30 mV)* ± 0.3% ( ± 0.06 mA)*
Approx. Mass: 100 g Input Conversion Time 1.4 ms max.
Current Consumption 5 V, 500 mA

* : After offset and gain adjustment by MPE720.

Analog Output Module (AO-01)
Items Specifications
Number of Channels 4
Number of Channels to be Used 1 to 4
Isolation Between channels: Not isolated, Between input connector and system power supply: Photocoupler isolation
Analog Output Range − 10 V to +10 V 0 V to +10 V
Resolution 16 bits ( − 31276 to +31276) 15 bits (0 to +31276)
Maximum Allowable Load Current ± 5 mA
25˚C ± 0.1% ( ± 10 mV)
Model: JAPMC-AN2310-E Accuracy
0˚C to 55˚C ± 0.3% ( ± 30 mV)
Approx. Mass: 90 g
Output Delay Time 1.2 ms*
Current Consumption 5 V, 800 mA max.

* : After change with a full scale of − 10 V to +10 V. Hardware Specifications

Counter Module (CNTR-01)

Items Specifications
Number of Channels 2
5-V differential: 4-MHz response frequency (RS-422, not isolated)
Input Circuit
12 V: 120-kHz response frequency
(Selected by software)
(12 V, 7 mA, current source mode input, and photocoupler isolation)
Input Method A/B (1, 2, or 4 multipliers), UP/DOWN (1 or 2 multipliers), and sign (1 or 2 multipliers)
Counter Functions Reversible counter, interval counter, and frequency measurement
Maximum Frequency 4 MHz with 5-V differential input (16 MHz with 4 multipliers)
Model: JAPMC-PL2300-E Coincident Interruption Simultaneous output to CPU module via system bus and output module.
Approx. Mass: 85 g
Coincident Output 2 points, 24 V, 50 mA current sink mode input, and photocoupler isolation
2 points, 24 V, 50 mA, current sink mode input, and photocoupler isolation
DO Output
(zone output, speed-coincidence output, and frequency-coincidence output)
PI Latch Input 2 points, 24 V, source mode input, and photocoupler isolation
Current Consumption 5 V, 600 mA

55
 Hardware Specifications

I/O Modules for MECHATROLINK-2 Applicable Models: MP

2500
MP
2200
MP
2300
MP
2310
MP
2300S
MP
2100

64-point I/O Modules (IO2310/IO2330)

Items Specifications
Input: 64 points, 24 VDC, 5 mA, sink/source mode input
Output: 64 points, 24 VDC, 50 mA
I/O Signals
sink mode output (IO2310), source mode output (IO2330)
Signal connection method: Connector (FCN360 series)
Module Power 24 VDC (20.4 V to 28.8 V)
Model: JEPMC-IO2310 Model: JEPMC-IO2330
Supply Rated current: 0.5 A, Inrush current: 1 A
Approx. Mass: 590 g Approx. Mass: 590 g

Various I/O Modules

Model: JEPMC-PL2900/PL2910, Model: JAMSC-IO2900-E/-IO2910-E,

JEPMC-AN2900/AN2910 JAMSC-IO2920-E/-IO2950-E
Approx. Mass: 300 g Approx. Mass: 300 g

Counter Module (PL2900) Pulse Output Module (PL2910)

Model JEPMC-PL2900 Model JEPMC-PL2910
Number of Input Channels 2 Number of Output Channels 2
Functions Pulse counter, notch output Functions Pulse positioning, JOG run, zero-point return
Sign (1/2 multipliers), Pulse Output Method CW, CCW pulse, sign + pulse
Pulse Input Method A/B (1/2/4 multipliers) , Max. Output Speed 500 kpps
UP/DOWN (1/2 multipliers) Pulse Output Voltage 5 VDC
Max. Counter Speed 1200 kpps (4 multipliers) Pulse Interface Open collector output
Pulse Input Voltage 3/5/12/24 VDC Circuit 5 VDC,10 mA/circuit
For input signal: 24 VDC Digital input: 8 points/module
External Power For driving load: 24 VDC External Control 5 VDC × 4 points, 24 VDC × 4 points
Supply For module: 24 VDC (20.4 V to 26.4 V) Signal Digital output: 6 points/module
120 mA or less 5 VDC × 4 points, 24 VDC × 2 points

Analog Input Module (AN2900) 16-point Input Module (IO2900-E)

Analog Output Module (AN2910) 16-point Output Module (IO2910-E)
Model JEPMC-AN2900 JEPMC-AN2910 Model JAMSC-IO2900-E JAMSC-IO2910-E
Number of Input/Output Channels Input : 4 Output : 2 Number of Input/Output Points Input : 16 Output : 16
Input/Output Voltage Range Input : − 10 V to +10 V Output : − 10 V to +10 V Rated Voltage 12/24 VDC
Input Impedance 1 M Ω min. − Rated Current 2 mA/5 mA 0.3 A
Max. Allowable Load Current − ± 5 mA (2 M Ω ) Input/Output Method Input : sink/source mode input Output : sink mode output
Data Region − 32000 to +32000 External Power 24 VDC (20.4 V to 28.8 V), 24 VDC (20.4 V to 28.8 V),
Input/Output Delay Time Input : 4 ms max. Output : 1 ms max. Supply 90 mA 110 mA
+0.5% F.S (at 25˚C), +0.2% F.S (at 25˚C),
Error
± 1.0% F.S (at 0˚C to 60˚C) ± 0.5% F.S (at 0˚C to 60˚C)
External Power Supply 24 VDC (20.4 V to 26.4 V), 120 mA max.

8-point I/O Module (IO2920-E) Relay Output Module (IO2950-E)

Model JAMSC-IO2920-E Model JAMSC-IO2950-E
Number of I/O Points Input : 8, Output : 8 Number of Output Points 8
Rated Voltage 12/24 VDC Rated Voltage 12/24 VDC, 100/200 VAC
Input : 2 mA/5 mA Rated Current 1.0 A
Rated Current
Output : 0.3 A Output Method Contact output
Input/Output Input : sink/source mode input External Power Supply 24 VDC (20.4 V to 28.8 V), 150 mA
Method Output : sink mode output
External Power Supply 24 VDC (20.4 V to 28.8 V), 90 mA

56
 MP2000 Series Machine Controller

Image-processing Unit (MYVIS)

A networked machine vision system that processes images and takes into account the servo
coordinate system with detection of the servo-axis position.
Standalone Type
Items Unit Type
For Analog Cameras For Camera Link
Model JEVSA-YV260 1-E JEVSA-YV260 2-E
Model: JEVSA-YV260 Image Processing Gray scale pattern matching, binary image analysis etc.
Approx. Mass: 2.5 kg CPU Main CPU : SH-4A (600 MHz), Sub CPU : SH-2A (200 MHz)
Image LSI FPGA
Processing Inter - image operations ( addition, averaging, subtraction, and
Pre-processing Function
Hardware difference operation), 3 × 3 filter, dilation/erosion
Application Program 512 Kbytes (flash memory)
Backup Memory 256 Kbytes CMOS (for saving parameters)
Memory Template Storage Memory CF cards (2 Gbytes max.)
Image Frame Memory 4096 × 4096 × 8 bits × 4 images (Can be used for 640 × 480 × 8 bits × 192 images)
Memory Template Memory 16 Mbytes
CameraLink (MDR26pin) × 4
New EIAJ 12-pin connector × 4
VGA (640 × 480) to QSXGA
Camera Interface EIA (640 × 480) to (1400 × 1050)
(2440 × 2048),
Four B&W, 8-bit A/D-converter circuits
Base Configuration, PoCL-compatible
Image
Camera Power Supply Single camera : 12 V, 400 mA, Total : 1.2 A max.
Input
Camera Sync Mode Internal/external sync Internal sync
Random Shutter Supported Sync-nonreset, sync-reset, single VD or V reset
Simultaneous Image Capture Four cameras
Input Image Conversion Gray level conversion (LUT), mirror mode
Monitor Output VGA, XGA (color), 15pin D-sub
Monitor A full-screen or a partial-screen for one camera, simultaneous screen reduction
Image Display
for two or four cameras, gray level conversion (binary image display supported)
Field Network MECHATROLINK- 1 / 2
LAN (Ethernet) 10BASE-T/100BASE-TX
General-purpose Serial RS-232C × 2 channels (115.2 kbps)

I/F 16 general-purpose outputs (4 of these are also used for stroboscope) + 2 outputs
exclusive for alarms (24 VDC, photocoupler isolation)
Parallel I/O
16 general-purpose inputs (4 of these are also used for trigger) + 3 inputs exclusive
for mode switchings + 1 input exclusive for trigger (24 VDC, photocoupler isolation)
Track Ball USB mouse
Power Supply 100 V/200 VAC, 24 VDC, 30 W

MECHATROLINK-2 Repeater
Required to stabilize communication and to extend the total length of the cable.
Items Specifications Hardware Specifications
Communication Type MECHATROLINK-2
Max. Cable Length Between controller and repeater: 50 m, After repeater: 50 m
Model: JEPMC-REP2000 Max. Connected Stations Total stations on both sides of repeater: 30*
Approx. Mass: 340 g
M- MECHATROLINK- REP MECHATROLINK-
Terminator
Master 2000
Slave Slave Slave Slave

Restrictions Total cable length 30 m: 15 stations max. Total cable length 30 m: 16 stations max.
30 m < Total cable length 50 m: 14 stations 30 m < Total cable length 50 m: 15 stations
max. max.

100 m max.

Power Supply 24 VDC, 100 mA

* : Limited to the max. number of connectable stations of the controller (e.g., 21 stations for the MP2000 series).

57
 Hardware Specifications

MECHATROLINK-3 Compatible Modules Applicable Models: MP

2200
MP
2300
MP
2310
MP
2300S

Hub Module
Items Specifications
Data Transfer Method MECHATROLINK-3
Transmission Speed 100 Mbps
Transmission Medium MECHATROLINK-3 cable, model : JEPMC-W6012- -E
Number of Master-side port : 1 (CNM1) to connect the master station
MECHATROLINK Ports Slave-side port : 8 (CNS1 to CNS8) to connect slave stations
FIFO arbitration discipline
Arbitration
Error when multiple slave-side ports receive data at the same time
Model : JEPMC-MT2000-E Transmission Delay
Approx. Mass : 800 g 600 ns (typ)
Time between Ports
Indicators 1 indicator for power supply ON/OFF, 9 indicators for port link status
External Power Supply 24 VDC ( ± 20%), 0.5 A (CN1)
Installation Orientation Vertical or horizontal
Exterior Painted

Network Analyzer Module

Traces the data sent or received through MECHATROLINK-3 communication (cyclic communication).
Items Specifications
Input supply voltage : 24 VDC ± 20%
Power Supply Current consumption : 1 A max.
Inrush current : 40 A

Two circuits for MECHATROLINK-3 (To be connected to the end of network connection.)
Motion Transmission speed : 100 Mbps (MECHATROLINK-3)
Network Transmission distance : 20 cm to 100 m
Terminator : not required
Model : JEPMC-MT2010-E
Approx. Mass : 270 g Communication Ports 1 port (Ethernet : 100BASE-TX/10BASE-T)
Note : Requires the network analyzer tool (model : CMPC-NWAN710) for settings and operation.

Network Adapter Module

Relays MECHATROLINK-3 messages from Ethernet port to MECHATROLINK-3 network.
Items Specifications
Input supply voltage : 24 VDC ± 20%
Power Supply Current consumption : 1 A max.
Inrush current : 40 A

Two circuits for MECHATROLINK-3 (To be connected to the end of network connection.)
Motion Transmission speed : 100 Mbps (MECHATROLINK-3)
Network Transmission distance : 20 cm to 100 m
Model : JEPMC-MT2020-E Terminator : not required
Approx. Mass : 270 g Communication Ports 1 port (Ethernet : 100BASE-TX/10BASE-T)
Note : Requires the adapter tool (model : CMPC-NWAD710) for settings and operation.
The adapter tool is available for free. Download it from Yaskawa’
s Product and Technical
Information on Yaskawa’s website at http://www.e-mechatronics.com.

64-point I/O Module

Items Specifications
Input: 64 points, 24 VDC, 5 mA, sink/source mode input
I/O Signals
Output: 64 points, 24 VDC, 50 mA when all points ON* sink mode output
Module Power 24 VDC (20.4 V to 28.8 V)
Supply Rated current: 0.5 A

* : The max. rating is 100 mA per point (depending on derating conditions).

Model : JEPMC-MTD2310-E
Approx. Mass : 550 g

58
 MP2000 Series Machine Controller

Analog Input Module (MTA2900)

Items Specifications
Analog Input Range − 10 V to +10 V 0 mA to 20 mA
Number of Channels 8 [ (4 channels/connector) × 2 ]
Number of Channels to be Used 1 to 8

Analog Input
Isolation Between channels: Not isolated
Max. Rated Input ± 15 V ± 30 mA
Input Impedance 20 k Ω 250 Ω
Resolution 16 bits ( − 31276 to +31276) 15 bits (0 to +31276)
Accuracy (0˚C to 55˚C) ± 0.3% ( ± 30 mV) ± 0.3% ( ± 0.06 mA)
Model : JEPMC-MTA2900-E
Input Conversion Time 1.4 ms max.
Approx. Mass : 300 g
Two circuits for MECHATROLINK-3 Transmission speed : 100 Mbps
Motion Network
Transmission distance : 20 cm to 100 m Terminator : not required
Module Power Supply 24 VDC (20.4 V to 28.8 V)，500 mA max.

Analog Output Module (MTA2910)

Items Specifications
Analog Output Range − 10 V to +10 V 0 V to +10 V
Number of Channels 4
Analog Output

Number of Channels to be Used 1 to 4

Isolation Between channels: Not isolated
Resolution 16 bits ( − 31276 to +31276) 15 bits (0 to +31276)
Maximum Allowable Load Current ± 5 mA
25˚C ± 0.1% ( ± 10 mV)
Accuracy
0˚C to 55˚C ± 0.3% ( ± 30 mV)
Model : JEPMC-MTA2910-E
Output Delay Time 1.2 ms*
Approx. Mass : 300 g
Two circuits for MECHATROLINK-3 Transmission speed : 100 Mbps
Motion Network
Transmission distance : 20 cm to 100 m Terminator : not required
Module Power Supply 24 VDC (20.4 V to 28.8 V)，500 mA max.
*
: After change with a full scale of − 10 V to +10 V.

Pulse Input Module (MTP2900)

Items Specifications
Number of Channels 2
5-V differential: 4-MHz response frequency (RS-422, not isolated)
Input Circuit
12 V: 120-kHz response frequency
(Selected by software)
(12 V, 7 mA, current source mode input, and photocoupler isolation)
Pulse Input

Input Method A/B (1, 2, or 4 multipliers), UP/DOWN (1 or 2 multipliers), and sign (1 or 2 multipliers)
Counter Functions Reversible counter, interval counter, and frequency measurement
Maximum Frequency 4 MHz with 5-V differential input (16 MHz with 4 multipliers)
Coincident Output 2 points, 24 V, 50 mA current sink mode input, and photocoupler isolation
Model : JEPMC-MTP2900-E
2 points, 24 V, 50 mA, current sink mode input, and photocoupler isolation
Approx. Mass : 300 g DO Output
(zone output, speed-coincidence output, and frequency-coincidence output)
PI Latch Input 2 points, 24 V, source mode input, and photocoupler isolation
Input Method Sign，UP/DOWN and A/B pulse
Hardware Specifications
Two circuits for MECHATROLINK-3 Transmission speed : 100 Mbps
Motion Network
Transmission distance : 20 cm to 100 m Terminator : not required
Module Power Supply 24 VDC (20.4 V to 28.8 V)，500 mA

Pulse Output Module (MTP2910)

Items Specifications
Number of Controlled Axes 4
Output Method : CW/CCW, sign + pulse, and phase A/B
Maximum Frequency : 4 Mpps with CW/CCW or sign + pulse,
Pulse Output

Pulse Output
1 Mpps with phase A/B (before multiplication)
Interface : 5-V differential outputs
5 points × 4 channels, source mode input
Digital Input DI_0 : Separate for each power supply··· 5 V/3.9 mA, 12 V/10.9 mA, 24 V/4.1 mA
DI_1 to DI_4: Power supply shared ··· 24 V/4.1 mA
Model : JEPMC-MTP2910-E
Digital Output 4 points × 4 channels Open collector and sink mode output (24 V/100 mA)
Approx. Mass : 300 g
Two circuits for MECHATROLINK-3 Transmission speed : 100 Mbps
Motion Network
Transmission distance : 20 cm to 100 m Terminator : not required
Module Power Supply 24 VDC (20.4 V to 28.8 V)，500 mA

59
 Hardware Specifications

Other Modules Contact individual manufacturers for more details.

MP MP MP MP
AnyWire DB Master Applicable Models: 2200 2300 2310 2300S

Items Specifications
Transmission Clock 7.8 kHz 15.6 kHz 31.3 kHz 62.5 kHz
Max. Transmission Distance 1 km 500 m 200 m 100 m
Transmission Special protocol (Anywire Bus DB protocol)
Protocol Note: Upper compatibility with UNI-WIRE protocol
Full triple mode: 2304 points (Bit-Bus: 256 points, Word-Bus: 2048 points)
Max. Number of I/Os
Full quadruple mode: 2560 points (Bit-Bus: 512 points, Word-Bus: 2048 points)
Model: AFMP-01 Bit-Bus Full triple mode: 256 bits max., Full quadruple mode: 512 bits max.
Approx. Mass: 90 g Dual-Bus Function Word-Bus Full triple mode: 128 words max. (64 words each for IN and OUT),
Full quadruple mode: 128 words max. (64 words each for IN and OUT)
Made by
Anywire Corporation 128 stations (Fan-out = 200)
Max. Number of Stations
Note: Anywire DB products: Fan-in = 1, UNI-WIRE products: Fan-in = 10
General-purpose 2-wire cable or 4-wire cable (VCTF 0.75 sq to 1.25 sq)
Connection Cable
Special flat cable (0.75 sq), general purpose wire (0.75 sq to 1.25 sq)

MP MP MP MP
CC-Link Interface Board Applicable Models: 2200 2300 2310 2300S

AFMP AFMP
Items Specifications -02-C -02-CA
Station Type Remote device station
Number of Stations 4
No. of Remote Stations Station number setting range: 1 to 61 (4 stations are occupied after setting the number of stations)
No. of Remote Input: Max. 896 points, Output: Max. 896 points (Version 2.0 with 8 times
Device Points setting) Input: Max. 112 points, Output: Max. 112 points (Version 1.1)
CC-Link Specifications

Model: AFMP-02-C No. of Remote Input: Max. 128 points, Output: Max. 128 points (Version 2.0 with 8 times
Approx. Mass: 90 g Register Points setting) Input: Max. 16 points, Output: Max. 16 points (Version 1.1)
Transmission Speed 10 M, 5 M, 2.5 M, 625 k, and 156 kbps (Select with the switch.)
Made by
Anywire Corporation Transmission Distance 100 m (10 Mbps), 160 m (5 Mbps), 400 m (2.5 Mbps), 900 m (625 kbps), and 1200 m (156 kbps)
(1 × a) + (2 × b) + (3 × c) + (4 × d) 64 [a: Number of slave products that occupy
one station, b: Number of slave products that occupy two stations, c: Number of slave
No. of CC-Link
products that occupy three stations, d: Number of slave products that occupy four stations]
that can be
(16 × A) + (54 × B) + (88 × C) 2304 [A: Number of remote I/O stations (Max. 64
connected
units) B: Number of remote device station units (Max. 42 units) C: Number of local
station and intelligent device station units (Max. 26 units)]
Connection Cable CC-Link cable; a three-core, shielded, twisted-pair cable
Transmission Clock 7.8 kHz, 15.6 kHz, 31.3 kHz, and 62.5 kHz −
Anywire DB Specifications

Max. Transmission Distance Max. Overall Cable Extension Length: 100 m, 200 m, 500 m, or 1 km. −
Model: AFMP-02-CA
Approx. Mass: 90 g Full triplex mode: Max. 2304 points
(Bit-bus: Max. 256 points, Word-bus: Max. 2048 points)
I/O Points −
Made by Full quadruplex mode: 2560 points
Anywire Corporation (Bit-bus: Max. 512 points, Word-bus: Max. 2048 points)
Anywire Bus Port One port, detachable terminal block −
General-purpose 2-core or 4-core cable (VCTF 0.75 sq to 1.25 sq),
Connection Cable −
dedicated flat cable (0.75 sq), general-purpose wire (0.75 sq to 1.25 sq)

MP MP MP MP
A-net/A-Link Master Unit Module Applicable Models: 2200 2300 2310 2300S

Items A-net A-Link

Communication Control IC MKY40 MKY36
Communication Mode Two-wire half duplex Four-wire full duplex / two-wire half duplex
Transmission Speed 3/6/12 Mbps 3/6/12 Mbps
Error Detection CRC-16 CRC-12
Transmission Distance 300/200/100 m 300/200/100 m

Model: MPANL00-0
Approx. Mass: 90 g

Made by
Algo System Co., Ltd.
60
 MP2000 Series Machine Controller

Dimensions Units: mm

MP2100, MP2101, MP2100M, MP2101M, MP2100MEX Board

MP2101T Board MP2101TM Board
(Half the Size of Standard PCI) (Half the Size of Standard PCI)
S1 CN7
6:SLOT1
5:SLOT0
3:CNFG

1:INIT
1:TEST
2:MON
4:SUP

2:STOP S2
S2

CN5

CN6

106.68
106.68
S1

98.42
174.63 174.63 174.63

MP2200 Base Unit

BU2200 (MBU-01)，BU2210 (MBU-02) BU2220 (MBU-03)
Mounting Hole Diagram Mounting Hole Diagram

(3.5)
M4 Mounting Screws (4)
Protruding Length: 3.5
231±0.2 4-Tapped 111±0.2
121±0.2 Holes M4

121±0.2
4-Tapped Holes M4
4.5

(4.5)
120
(4.5) 111 (4.5) (18) 108±0.4
(35)
121
130

50

121 Name
130
4 .5

4.5 231 4.5 (18) 108 plate

240

Connector of Cable Side (3P)

(4.5)

721-203/026-000

MP2300, MP2310 Basic Module

120 120 Mounting Hole Diagram
(4.5) 111 4.5 (4.5) 111 4.5
(4.5)

(4.5)

(18) 108
111±0.2 4-Tapped Holes M4
MP2300 218IF-01 LIO-01 LIO-01 MP2310
LD1 LD1 RDY RUN
YASKAWA YASKAWA ALM ERR

MTX BAT

TRX IP
121± 0.2

STOP
SUP STOP
INIT INIT SUP
CNFG INIT
MON CNFG SW1
TEST
SW1 I/O I/O MON
OFF ON TEST
PORT ON
121
130

121
130

M-4/10

E-INIT SW2
E-TEST
ON
BATTERY BATTERY

CPU I/O

DC24V

DC 0V
10Base-T
DC24V

DC 0V
M-I/II
Ethernet
LINK
Hardware Specifications
POWER POWER

100 M
4.5

4.5

MP2300 MP2310 Side View: Both Modules

MP2300S Basic Module MP2400

64 (42) 108 45 (21) 108
DIN Rail* DIN Rail*
(Width: 35) (Width: 35)
(10: With DIN Rail

(10: With DIN Rail

130

130

Nameplate Nameplate
Mounted)

Mounted)

Connector
for Relay Connector
(2-pin) for Relay
(2-pin)

Power-supply Terminator for MECHATROLINK

(9)

(14: When
(14: When

Connector
opened)

(included in
opened)

Power-supply
(3-pin) the accessories) : Metal brackets can be also
used to mount the module. * Connector
(3-pin) *: Metal brackets can be also
used to mount the module.

61
 Hardware Specifications

Touch Panel with Integrated 15-inch Display Touch Panel with Integrated 12.1-inch Display
(MP2500/MP2500M) (MP2500/MP2500M)
425 Motion 165.5 338 165.1
Board 5 Motion Board
383 295
325

282

286

243
Top View Side View Top View Side View

Touch Panel with Separate 10.4-inch Display Touch Panel with Separate 12.1-inch Display
(PNL-10) (PNL-12)
263.2 299.2
22 220 4 Tapped Holes (M3): 20 260 4 Tapped Holes (M3):

12.5
12.5

Used to fix the controller unit. Used to fix the controller unit.
10 200 13 37 24 10 240 13 37 24
6

6
50
55

60
65
213
225

100
200

95

214

100
227
239

95
50
50

54
54
25 223 16
12.5

12.5 61 223 16

6
Cable for Connecting
the Controller Unit Cable for Connecting
the Controller Unit

Separated PC Box Separated PC Box

(MP2500B/MP2500MB) (MP2500B-OP/MP2500MB-OP)
209 (4) 209 (4)

0.8
131 1 132.6 0.1
0.8

29.5 46.3 48.5 49.5 46.3

53.5
48.5
53.5

4-4.5 Dia. Holes

186
100

197
95
100
196
197
95

48.5

48.5
48.5

48.5

7 7 7 7
0.2

10.2

223 223 (54)

Motion Board Motion Board

62
 MP2000 Series Machine Controller

MECHATROLINK-2 Compatible Modules

64-point I/O Module Counter, Pulse, and Analog Modules
120 20 108 4.5 152 4.5
(4.5) 111 4.5
(4.5)

89.8
79
RUN TX 1 2 3 4 5 6 7 8 120 DDI 343 30
130
121

161
4.5 152 4.5
RUN TX 1 2 3 4 5 6 7 8 120 DDI 343 30
4.5

30
44
C
N
1
C
N
2

9.5
Mounting Hole Diagram
111±0.2 4-Tapped Holes M4 Mounting Hole Diagram (Two Methods)
Base mounted Rear mounted
121±0.2

152±0.3

30±0.2
152±0.3

60±0.2
2-Tapped Holes M4

2-Tapped Holes M4

16-point/8-point I/O Module, Relay Output Module

4.5 152
61
42
72

RUN TX 1 2 3 4 5 6 7 8 120 DRA 830 30

9.5

161
4.5 152
RUN TX 1 2 3 4 5 6 7 8 120 DRA 830 30
9.5 30
44

C
N
1
C
N
2

YASKAWA

MECHATROLINK-3 Compatible Modules

Hub Module Network Analyzer, Network Adapter Module
(133.2)
115 (18) 50
15 85 15 10 30 10
5
5

45 (21) 108
a. a.
Di Di
5 5
Hardware Specifications
Nameplate
185
175

Connector of Cable Side (3P)

175

130

721-203/026-000
(made by WAGO Company
of Japan, Ltd.)

.5 R2. POWER Connector (3P)

R2 Lever
5
FG Screw 721-203/026-000
231-131 (M3)
5

5 Nameplate 5 5 5
5

(made by WAGO Company

15 85 of Japan, Ltd.) 30 10

63
 Hardware Specifications

MECHATROLINK-3 Compatible Modules (Cont’d)

64-point I/O Module Analog Input Module
120 20 108
(4.5) 111 4.5
(4.5)

45 (41) 108 Nameplate

62
DIN Rail
130
121

(13: When opened)

(Width: 35)

130

Rail Mounted)
(8: With DIN

68
4.5

(8)
Mounting Hole Diagram
111±0.2 4-Tapped Holes M4
121±0.2

Analog Output Module Pulse Input Module

45 (41) 108 Nameplate 45 (41) 108 Nameplate

62

62
DIN Rail DIN Rail
(13: When opened)

(13: When opened)

(Width: 35) (Width: 35)

130

130
Rail Mounted)

Rail Mounted)
(8: With DIN

(8: With DIN

68

68
(8)
(8)

Pulse Output Module

45 (40) 108 Nameplate

62

DIN Rail
(13: When opened)

(Width: 35)
130

Rail Mounted)
(8: With DIN

68
(8)

64
Software Specifications MP2000 Series Machine Controller

Sequence Controls

Items Specifications
MP2200: 150 k steps max. only with the ladder program. (Varies according to the size of the motion program used.)
MP2500, MP2500M, MP2300, MP2310, MP2300S, MP2100, MP2100M: 120 k steps max. only with the ladder
Program Capacity
program. (Varies according to the size of the motion program used.)
MP2400: Equivalent to 800 k characters only when using motion programs.
Control Method Sequence: High-speed and low-speed scan methods
Programming Language Ladder language: Relay circuit Textual language: Numerical operations, logic operations, etc.
2 scan levels : High-speed scan and low-speed scan
High-speed scan time setting: 1.0 ms to 32 ms (Integral multiple of a MECHATROLINK-2
Scanning communication cycle) (0.5 ms to 32 ms for MP2200)
Low-speed scan time setting : 2.0 ms to 300 ms (Integral multiple of a MECHATROLINK-2
communication cycle)
Startup drawings (DWG.A) : 64 drawings max. Up to 3 hierarchical drawing levels
High-speed scan process drawings (DWG.H): 200 drawings max. Up to 3 hierarchical drawing levels
Low-speed scan process drawings (DWG.L) : 500 drawings max. Up to 3 hierarchical drawing levels
User Drawings, Interrupt processing drawings (DWG.I) : 64 drawings max. Up to 3 hierarchical drawing levels
Functions, and Number of steps : Up to 1000 steps/drawing
Motion Programs User functions : Up to 500 functions
Motion programs : Up to 256
Revision history of drawings and motion programs
Security functions of drawings and motion programs
Common data (M) registers : 64 k words
System (S) registers : 4 k words
Drawing local (D) registers : Up to 16 k words/drawing
Data Memory Drawing constant ( # ) registers : Up to 16 k words/drawing
Input ( I ) registers : 32 k words (shared with output registers)
Output (O) registers : 32 k words (shared with input registers)
Constant (C) registers : 16 k words
Trace Memory Data trace : 128 k words (32 k words × 4 groups), 16 items/group defined
Memory Backup Program memory : Flash memory (Battery backup for M registers)
Bit (relay) : ON/OFF
Integer : – 32768 to +32767
Data Types
Double-length integer : – 2147483648 to +2147483647
Real number : ± (1.175E – 38 to 3.402E +38)
Register number : Direct designation of register number
Register Designation Method Symbolic designation : Up to 8 alphanumeric characters (up to 200 symbols/drawing) With
automatic number or symbol assignment
Note: The MP2400 has no user drawings because the MP2400 uses only motion programs.

・ Hardware Specifications
Software Specifications

65
 Software Specifications

Motion Controls

Items Specifications
PTP control, interpolation,
Control Specifications speed reference output, torque reference output,
position reference output, phase reference output
1 DEC1+C 2 ZERO 3 DEC1+ZERO 4 C pulse
5 DEC2+ZERO 6 DEC1+LMT+ZERO 7 DEC2+C 8 DEC1+LMT+C
Zero-point Return (17 types) 9 C pulse only 10 POT & C pulse 11 POT only 12 HOME LS & C
13 INPUT 14 HOME only 15 NOT & C pulse 16 NOT only
17 INPUT & C pulse Note: Types 5 to 8 are available only with SVA.
Number of Controlled Axes 1 to 16 axes (1 group)
Reference Unit mm, inch, deg, pulse
Reference Unit Minimum Setting 1, 0.1, 0.01, 0.001, 0.0001, 0.00001
Coordinate System Rectangular coordinates
– 2147483648 to +2147483647
Max. Programmable Value
(signed 32-bit value)
Speed Reference Unit mm/min, inch/min, deg/min, pulse/min, mm/s, inch/s, deg/s, pulse/s
Acceleration/Deceleration Type Linear, asymmetric, S-curve
Positioning: 0.01% to 327.67% by axis
Override Function
Interpolation: 0.01% to 327.67% by group
Language Motion language, ladder language
Number of Tasks 16 (Equal to the number of tasks that the ladder instruction, MSEE, can execute at the same time.)
Number of Programs Up to 256
36 k lines (1.6 M characters) when the ladder program has 4 k steps.
Varies according to the size of the motion program used. For
MP2200
example, the motion program has 24 k lines (1.2 M characters)
Programs when the ladder program has 40 k steps.
Program Capacity 24 k lines (1.2 M characters) when the ladder program has 4 k steps.
MP2500, MP2500M, MP2300,
Varies according to the size of the motion program used. For
MP2310, MP2300S, MP2100,
example, the motion program has 16 k lines (800 k characters)
MP2100M
when the ladder program has 40 k steps.
MP2400 Equivalent to 800 k characters only when using motion programs.

66
 MP2000 Series Machine Controller

Support Tools (Optional)

MPE720 Version 6 Engineering Tool Model: CPMC-MPE770

Hardware and Software Requirements
Items Specifications
CPU Pentium 800 MHz or more (1 GHz or more recommended)
Memory 128 Mbytes or more (256 Mbytes or more recommended)
Free Hard Disk Space 200 Mbytes min.
Display Resolution: 1024 × 768 pixels min., High Color (16 bits)
CD Drive 1 (only for installation)
Communication Port RS-232C, Ethernet, MP2100 bus, or USB
Basic OS* Windows 2000 Professional (SP1 or later), Windows XP, Windows Vista, or Windows 7
Others Internet Explorer 5.5 or later, Adobe Reader

* : Only 32-bit versions

Functions
Items Specifications
Ladder Editor Ladder mode by Ladder Works, Ladder mode
Command execution, Definition setting, Ladder program (ladder mode),
Engineering Manager
Table data definition, Motion program
Parameters Symbol manager for database management in ladder mode by Ladder Works; parameters: system, axis, I/Os, and global.
Help Command/operation help (ladder mode by Ladder Works), Version information
Communication Process Communication setting
Printing Preview in ladder mode by Ladder Works, Program, and Cross reference (ladder mode)
Register List Register display
Cam Tool Electronic cam data generation
Customized Functions Editor (ladder mode by Ladder Works), Toolbar

Commands for Motion Programs

Classifi- Classifi-
cations Commands Functions cations Commands Functions
MOV Positioning MSEE Subprogram call
MVS Linear interpolation TIM Dwell time
Commands
Axis Move Commands

Control

Circular interpolation, Helical circular IOW I/O wait

MCC
interpolation (counterclockwise) END Program end
Circular interpolation, Helical circular RET Subprogram end
MCW
interpolation (clockwise) EOX One scan wait
ZRN Zero-point return IF，ELSE，IEND Branching commands
SKP Skip WHILE，
Repeat commands
MVT Set time positioning WEND
EXM External positioning PFORK，
ABS Absolute mode JOINTO， Parallel execution commands
Basic Control

INC Incremental mode PJOINT

Commands

Sequence Commands

POS Current position set SFORK，

PLN Coordinate plane setting JOINTO， Selective execution commands
MVM Move on machine coordinate SJOINT
Software Specifications

PLD Program current position update = Substitution

ACC Acceleration time change +, – , ＊ , ／ , MOD Arithmetic operations
Deceleration Commands
Speed and Acceleration/

SCC S-curve time constant change ｜ , ^, &, ! Logic operations

VEL Set velocity SIN, COS, TAN, ASN，
IAC Interpolation acceleration time change ACS, ATN, SQRT， Function commands
IDC Interpolation deceleration time change BIN, BCD
IFP Interpolation feed speed ratio setting = =,〈〉, 〉，
Numeric comparison commands
FMX Maximum interpolation feed speed setting 〈, 〉=,〈=
PFN In-position check SFR, SFL, BLK, CLR Data operation
Commands
High-level
Control

INP Second in-position check （）, S{}, R{} Others

SNG Ignore single block signal
UFC User function call

Commands for Sequence Programs (Note)

Classifications Commands Functions Classifications Commands Functions
Control FUNC User function call Sequence Control PON, NON Rising pulse, falling pulse
Commands SSEE Sequence program call Commands TON, TOF Turn On Delay timer, Turn OFF Delay timer
Note: These commands cannot be used with CPU-01, CPU-02, MP2300, and MP2100 version 2.64 or earlier versions.
67
 Software Specifications

MPE720 Version 6 Engineering Tool (Cont’d)

Commands for Ladder Programs
Classifi- Classifi- Classifi-
cations Instructions Functions cations Instructions Functions cations Instructions Functions

Instructions
SEE Child drawing call AND Conjunction

Instructions
Operation

Direct I/O
INS Direct input

Logic
Program Control Instructions

MSEE Motion program call OR Logical sum

FUNC Function call XOR Exclusive OR OUTS Direct output
XCALL Extension program call ADD Addition DZA Dead zone A
FOR SUB Subtraction DZB Dead zone B
For structure
END_FOR ADDX Extended addition LIMIT Upper/lower limit

Numeric Operation Instructions

WHILE SUBX Extended subtraction PI PI control
While structure
END_WHILE STORE Store PD PD control

DDC Instructions
IF MUL Multiplication PID PID control
If structure
END_IF DIV Division LAG First-order lag
EXPRESSION Expression structure INC Increment LLAG Phase lead/lag
NOC NO contact DEC Decrement FGN Function generator
NCC NC contact MOD Integer remainder Inverse function
IFGN
ON-PLS Rising pulse REM Real number remainder generator
OFF-PLS Falling pulse TMADO Add time LAU Linear accelerator
Relay Circuit Instructions

10 ms TMSUB Subtract time SLAU S-curve accelerator

TON[10ms]
on-delay timer SPEND Spend time PWM Pulse width modulation
10 ms INV Sign inversion TBLBR Table read
TOF[10ms]
off-delay timer COM 1’s complement TBLBW Table write
Numeric Conversion

Table Data Operation

1s ABS Absolute value conversion TBLSRL Row search
TON[1s]
Instructions

on-delay timer BIN Binary conversion TBLSRC Column search

Instructions
1s BCD BCD conversion TBLCL Table clear
TOF[1s]
off-delay timer PARITY Parity conversion TBLMV Table block transfer
COIL Coil ASCII ASCII conversion 1 QTBLR,QTBLRI Queue table read
S-COIL Set coil BINASC ASCII conversion 2 QTBLW,QTBLWI Queue table write
R-COIL Reset coil ASCBIN ASCII conversion 3 Queue table write
QTBLCL
RCHK Range check pointer clear
Comparison

ROTL Bit left rotation COUNTER Counter

Instructions
Numeric

ROTR Bit right rotation FINFOUT First-in/first-out

MOVB Bit transfer TRACE Trace
Data Operation Instructions

MOVW Word transfer DTRC-RD Data trace read

System Functions

XCHG Exchange transfer FTRC-RD Failure trace read

SETW Table initialization SQRT Square root ITRC-RD Inverter trace read
Basic Function Instructions

BEXTD Byte-to-word expansion SIN Sine MSG-SND Send message

BPRESS Word-to-byte compression COS Cosine MSG-RCV Receive message
BSRCH Binary search TAN Tangent Inverter
ICNS-WR
SORT Sort ASIN Arc sine constant write
SHFTL Bit left shift ACOS Arc cosine Inverter
ICNS-RD
SHFTR Bit right shift ATAN Arc tangent constant read
COPYW Word copy EXP Exponent
BSWAP Byte swap LN Natural logarithm
LOG Common logarithm

Electronic Cam Data Generation Tool

Items Specifications
Cam curves can be selected from:
Straight line Parabolic Simple harmonic
Cycloid Modified trapezoid Modified sine
Modified constant velocity Asymmetrical cycloid Asymmetrical modified trapezoid
Trapecloid Single-dwell cycloid m=1 Single-dwell cycloid m=2/3
Data Generation
Single-dwell modified trapezoid m=1 Single-dwell ferguson trapezoid Single-dwell modified trapezoid m=2/3
Single-dwell modified sine Single-dwell trapecloid No-dwell simple harmonic
No-dwell modified trapezoid No-dwell modified constant velocity NC2 curve
Free-form curve Inverted trapecloid Paired strings
Inverted paired strings
Data graph: Parameter setting, style setting, graph data editing
Data Editing Data list: Insert, delete, etc.
Control graph display: Displacement data, speed data, acceleration data, jerk data, graph comparison
Data Transfer Cam data file is transferred to registers (M or C)

68
 MP2000 Series Machine Controller

Motion API Model: CPMC-MPA700

Hardware and Software Requirements
Items Specifications
CPU Pentium 200 MHz or more (Pentium 400 MHz or more recommended)
Memory Capacity 64 Mbytes min.
Free Hard Disk Space 500 Mbytes min.
Display Resolution: 800 × 600 pixels min. (1024 × 768 pixels recommended)
Expansion Slot PCI half-size slot × 1
Interrupt Processing Single level specifications (IRQ sharing possible)
I/O Memory 32 kbytes shared memory
Windows 2000 Professional SP1 or later,
OS* Windows XP Professional SP1 or later,
Windows Vista, Windows 7
Microsoft Visual C/C++ 6.0 SP5 or later, Microsoft Visual Basic 6.0 SP5 or later,
Microsoft Visual C++ .NET2003, Microsoft Visual Basic .NET2003,
Development
Microsoft Visual C++ .NET2005, Microsoft Visual Basic .NET2005,
Language
Microsoft Visual C++ .NET2008, Microsoft Visual Basic .NET2008,
Microsoft Visual C++ .NET2010, Microsoft Visual Basic .NET2010
MP2100（model: JAPMC-MC2100-E）, MP2100M（model: JAPMC-MC2140-E）,
Motion Board MP2101（model: JAPMC-MC2102-E）, MP2101M（model: JAPMC-MC2142-E）,
MP2101T（model: JAPMC-MC2102T-E）, MP2101TM（model: JAPMC-MC2142T-E）

* : Only 32-bit versions

Motion Related API
Classifications Commands Functions Classifications Commands Functions
All clear for axis definition ymcClearAllAxes( ) Direct interpolation ymcMoveLinear( )
Clear for axis definition ymcClearAxis( ) Circular interpolation
ymcMoveCircularCenter( )
Clear for device ymcClearDevice( ) (specified main coordinate)
Device Device definition ymcDeclareDevice( ) Circular interpolation
ymcMoveCircularRadius( )
Axis definition ymcDeclareAxis( ) Interpolation (specified radius)
Acquisition of axis Helical interpolation
ymcGetAxisHandles( ) ymcMoveHelicalCenter( )
handle information (specified main coordinate)
Conversion: command unit Helical interpolation
ymcConvertFix2Float( ) ymcMoveHelicalRadius( )
to floating decimal point (specified radius)
Unit Conversion
Conversion: floating decimal Torque Reference Torque reference ymcMoveTorque( )
ymcConvertFix2Fix( )
point to command unit Disable gear control ymcDisableGear( )
Acquisition of motion parameter ymcGetMotionParameter Value( ) Gears Enable gear control ymcEnableGear( )
Parameter-related
Setting for motion parameter ymcSetMotionParameter Value( ) Setting for gear ratio ymcSetGearRatio( )
Operations
Setting for current position ymcDefinePosition( ) Compensation Compensation: positioning ymcPositionOffset( )
Positioning ymcMovePositioning( ) Motion-related Change motion data ymcChangeDynamics( )
JOG feeding ymcMoveJOG( ) Operations Disable axial execution ymcStopMotion( )
JOG feeding disable ymcStopJOG( ) Driver-related
Servo ON/OFF setting ymcServoControl( )
Positioning Origin return operation ymcMoveHomePosition( ) Operations
Positioning with specified time ymcMoveIntimePositioning( ) Disable latch ymcDisableLatch( )
External positioning ymcMoveExternalPositioning( ) Others Enable latch ymcEnableLatch( )
Positioning for driver ymcMoveDriverPositioning( ) Latch on standby ymcWaitTime( )
Software Specifications

System API
Classifications Commands Functions Classifications Commands Functions
Setting for bit ymcSetloDataBit( ) Specification of controller ymcOpenController( )
Setting for data ymcSetloDataValue( ) Release of specified controller ymcCloseController( )
Acquisition of data ymcGetloDataValue( ) Change of controller ymcSetController( )
System-related
Setting for register Acquisition of controller ymcGetController( )
Data-related ymcSetRegisterData( ) Operations
data value Acquisition of information
Operations
Acquisition of on last error for the ymcGetLastError( )
ymcGetRegisterData( )
register data value performed function
Acquisition of Acquisition of
ymcGetRegisterDataHandle( ) ymcGetCalendar( )
register data handle Calendar-related controller calendar
Acquisition of alarm Operations Setting of controller
ymcGetAlarm( ) ymcSetCalendar( )
System-related information calendar
Information Clear alarm ymcClearAlarm( ) Detection time
Others ymcSetAPITimeoutValue( )
Clear system alarm ymcClearServoAlarm( ) setting of API timeout

69
 Software Specifications

Control Information Monitoring Tool MPLOGGER  Model: CPMC-MPG700

Hardware and Software Requirements
Items Specifications
CPU Pentium 2 233 MHz min.
Memory Capacity 64 Mbytes min.
Free Hard Disk Space 1 Gbytes min. when logging, 100 Mbytes min. when not logging
Display Resolution: 800 × 600 pixels min.
CD Drive 1 (Network drive can be used.)
OS* Windows 2000 (SP1 or later), Windows XP (SP2 or later), Windows Vista
Application Programs Microsoft Excel 97 or later, DAO (Microsoft) Version 3.5, CimScope (Yaskawa’
s communication driver) Version 0.34 or later.

* : Only 32-bit versions

Data Transfer Tool MPLoader  Model: CPMC-MPL700C Communication Middleware MPScope  Model: CPMC-MPS700
Hardware and Software Requirements Hardware and Software Requirements
Items Specifications Items Specifications
Pentium 800 MHz or more, or equivalent Pentium 800 MHz or more, or equivalent
CPU CPU
(1 GHz or more recommended) (1 GHz or more recommended)
128 Mbytes or more 128 Mbytes or more
Memory Capacity Memory Capacity
(256 Mbytes or more recommended) (256 Mbytes or more recommended)
Free Hard Disk Space 20 Mbytes min. Free Hard Disk Space 50 Mbytes min. at system drive
Resolution: 800 × 600 pixels min., Communication Port Serial, Ethernet, PCI bus*1, or USB*2
Display
High Color (16 bits) Windows XP (SP2 or later)，
OS* Windows 2000/XP/Vista/7 OS*3 Windows Vista (SP1 or later),
Windows 7
* : Only 32-bit versions Microsoft Visual C ++ 6.0
Microsoft Visual Basic 6.0
OPC Server  Model: FA-Server 4.0 Development
Microsoft Visual C ++ .NET
Robotics, Inc. Language
Hardware and Software Requirements (http://www.roboticsware.co.jp) Microsoft Visual Basic .NET
Microsoft Visual C#
Items Specifications
CPU Pentium 133 MHz min. *12 :: With MP2100, MP2100M, MP2500, or MP2500M
*3 : Only
With MP2200-02 (CPU-02)
Free Hard Disk Space 30 Mbytes min.
* 32-bit versions
OS* Windows 98/Me/NT4.0/2000/XP
Development Microsoft Visual Basic, Microsoft Visual C++
Language (See Robticsware’ s website for more information.)

* : Only 32-bit versions

Compression/Transfer tool for Auto Startup File MPLoadMaker  Model: CPMC-MPL710
Hardware and Software Requirements
PC
Items
PC for software development with MPLoadMaker Target PC
Applicable Machine Controller MP2100，MP2100M，MP2200，MP2300
CPU Pentium 800 MHz or more, or equivalent (1 GHz or more recommended)
Free Hard Disk Space More than 25 Mbytes*1 (For one auto startup file) More than 1 Mbytes*1 (Only for transferring)
Memory Capacity 128 Mbytes or more (256 Mbytes or more recommended)
Display Resolution 800 × 600 pixels min.
Windows 2000 (Japanese and English), Windows 2000 (Japanese and English),
Windows XP (Japanese and English), Windows XP (Japanese and English),
OS*2
Windows Vista (Japanese and English), Windows Vista (Japanese and English),
Windows 7 (Japanese and English) Windows 7 (Japanese and English)
Communication Interface − 217IF*3, 218IF*3, USB, MP2100
File Transfer MAL or YMW files
Continuous Application Transfer − Provided
Hard Disk Space for Installation 30 Mbytes Installation not required

*12 :: Depending on the size of the application file to be transferred.

*3 : Only 32-bit versions
* Cannot be used for relays.

70
AC Servo Drives MP2000 Series Machine Controller

Model Designations For details, refer to each catalog.

Series (Catalog number: KAEP S800000 32)

SERVOPACKs
SGDS - A5 A 01 A
Series SERVOPACK Mounting Method
SGDS Blank : Base-mounted (For models of 7.5 kW or less)
R : Rack-mounted (For models of 5.0 kW or less)
Max. Applicable Motor Rated Output
Code Output Code Output Code Output Design Revision Order
A3 30 W 05 500 W 30 3.0 kW A, B・・・
A5 50 W 08 750 W 50 5.0 kW
Interface Specifications
01 100 W 10 1.0 kW 60 6.0 kW
02 200 W 15 1.5 kW 75 7.5 kW Code Specifications Applicable Servomotors
04 400 W 20 2.0 kW − − 01 For analog voltage/pulse reference
For analog voltage/pulse reference
02
Supply Voltage and fully closed control Rotary servomotors
For MECHATROLINK-2 and fully
Code Supply Voltage 12
closed control
A 200 VAC
05 For analog voltage/pulse reference
F 100 VAC [Input: 100 V, Output: 200 V (voltage doubled)] Linear servomotors
15 For MECHATROLINK-2
B 100 VAC [Input: 100 V, Output: 100 V (for SGMMJ motors)]

Servomotors
SGM - 01 A C A 2 1
Series Servomotor Options (SGMMJ only)
SGMMJ, SGMAS, SGMPS, Code Lead Length Code Lead Length
SGMSS, SGMGH Blank 300 mm J 1000 mm
H 500 mm K 1500 mm
Rated Output
Code Output Code Output Code Output Code Output Options
A1 10 W 03 300 W 12 1.2 kW*2 44 4.4 kW
Code Specifications
A2 20 W 04 400 W 13 1.3 kW 50 5.0 kW
1 No Option
A3 30 W 05 450 W 15 1.5 kW 55 5.5 kW
B 90-VDC Brake
A5 50 W 06 600 W 20 2.0 kW*3 70 7.0 kW
C 24-VDC Brake
C2 150 W 08 750 W 25 2.5 kW 75 7.5 kW
D Oil Seal, 90-VDC Brake
01 100 W 09 900 W*1 30 3.0 kW*4 − −
E Oil Seal, 24-VDC Brake
02 200 W 10 1.0 kW 40 4.0 kW − −
S Oil Seal
* 12 :: SGMGH (1500 min-1 ) : 850 W
Note : The model designation for SGMMJ motors will show code 1 or C.
* 3 : SGMAS : 1.15 kW
* 4 : SGMGH (1500 min-1) : 1.8 kW
Shaft End Specifications
* SGMGH (1500 min -1) : 2.9 kW

Code Specifications Applicable Models

Voltage SGMAS，SGMPS，
2 Straight, No key (Standard)*
SGMSS，SGMGH
Code Voltage Applicable Models
3 Taper 1/10, Parallel key (Optional) SGMSS，SGMGH
A 200 VAC SGMAS*, SGMPS*, SGMSS, SGMGH
4 Straight, Key (Optional) SGMAS，SGMPS
B 100 VAC SGMMJ
SGMGH
Taper 1/10, Woodruff key (Optional)
* : motors
200-VAC supply voltage can be used for SGMAS and SGMPS 5 (Only for some models)
even when 100 VAC is used for SERVOPACKs.
SGMAS，SGMPS，
6 Straight, Key, Tap (Optional)
SGMSS，SGMGH
Serial Encoder Specifications 8 Straight, Tap (Optional) SGMAS，SGMPS
Code Specifications No. of Pulses Straight, Flat (Optional)
・ Software Specifications

A SGMMJ
A*1 13-bit Incremental (Standard) 2048P/R
C*2 17-bit Incremental (Standard) 32768P/R * : Standard for SGMMJ models: straight and no flat.
2 17-bit Absolute (Standard) 32768P/R Design Revision Order
* 12 :: Only for SGMMJ motors. Code Specifications Applicable Models
* Not for SGMMJ motors. A
SGMAS, SGMPS, SGMSS, SGMGH
Standard (1500 min-1)
B SGMMJ, SGMGH (1000 min-1)
C For High-precision SGMGH (1500 min-1) -05 to -44 only
D Machinery SGMGH (1000 min--1) -03 to -30 only
E IP67 (Optional) SGMPS
AC Servo Drives

71
 AC Servo Drives

Series (Catalog number: KAEP S800000 42)

SERVOPACKs
S G D V - R 7 0 A 01 A
Series SERVOPACK Options
SGDV Blank : Base-mounted (Standard)
001000 : Rack-mounted (Optional)*
Current
100 V 200 V 400 V * : SERVOPACKs of 6 kW or more are duct-ventilated.
Code Applicable Servomotor Code Applicable Servomotor Code Applicable Servomotor Design Revision Order
Max. Capacity Max. Capacity Max. Capacity A, B・・・
R70 0.05 kW R70 0.05 kW 1R9 0.5 kW Interfaces
R90 0.1 kW R90 0.1 kW 3R5 1.0 kW
Code Specifications Applicable Servomotor
2R1 0.2 kW 1R6 0.2 kW 5R4 1.5 kW
01 Rotary servomotors
2R8 0.4 kW 2R8 0.4 kW 8R4 2.0 kW For analog/pulse reference
05 Linear servomotors
3R8 0.5 kW 120 3.0 kW
11 Rotary servomotors
5R5 0.75 kW 170 5.0 kW For MECHATROLINK-2
15 Linear servomotors
7R6 1.0 kW 210 6.0 kW
21 Rotary servomotors
120 1.5 kW 260 7.5 kW For MECHATROLINK-3
25 Linear servomotors
180 2.0 kW 280 11 kW
200 3.0 kW 370 15 kW Supply Voltage
330 5.0 kW F : 100 VAC
470 6.0 kW A : 200 VAC
550 7.5 kW D : 400 VAC
590 11 kW
780 15 kW

Servomotors
Without Gears
SGM - 01 A D A 2 1
Series Servomotors Options
SGMJV, SGMAV, SGMPS (Note), Code Specifications Applicable Models
SGMGV, SGMSV 1 No Options All models
Note : When ordering SGMPS servomotors, add an“-E”at the end B 90-VDC Brake SGMGV, SGMSV
of the model number. This indicates that it is RoHS-compliant. C 24-VDC Brake All models
D Oil Seal, 90-VDC Brake SGMGV, SGMSV
Rated Output E Oil Seal, 24-VDC Brake All models
Code Output Code Output S Oil Seal All models
A5   50 W 15 1.5 kW
Shaft End
01   100 W 20 2.0 kW*2
C2   150 W 25 2.5 kW Code Specifications Applicable Models
02   200 W 30 3.0 kW*3 2 Straight, Without Key (Standard) All models
03   300 W 40 4.0 kW 6 Straight, Key, Tap (Optional) All models
04   400 W 44 4.4 kW B Two-flat faces (Optional) SGMJV, SGMAV
05   450 W 50 5.0 kW Design Revision Order
06 550 W*1 55 5.5 kW
Code Specifications Applicable Models
08   750 W 70 7.0 kW
IP55 (Standard) SGMPS
09   850 W 75 7.5 kW
A IP65 (Standard) SGMJV, SGMAV
10   1.0 kW 1A 11 kW
IP67 (Standard) SGMGV, SGMSV*
13   1.3 kW 1E 15 kW
E IP67 (Optional) SGMPS
* 13 :: SGMJ V 600 W
* 2 : SGMGV 1.8 kW * : Except SGMSV-70 servomotors (IP22)
*Note :SGMGV 2.9 kW
Refer to Quick Reference-4, Combination of Machine Controllers and Series, Serial Encoder
on page 84 for rated output details for each model. Code Specifications Applicable Models
Voltage 2 17-bit Absolute (Standard) SGMPS
3 20-bit Absolute (Standard) SGMJV, SGMAV, SGMGV, SGMSV
Code Voltage Applicable Models
A 13-bit Incremental (Standard) SGMJV
A 200 VAC All models
C 17-bit Incremental (Standard) SGMPS
D 400 VAC SGMGV, SGMSV
D 20-bit Incremental (Standard) SGMJV, SGMAV, SGMGV, SGMSV

With Gears
SGM - 01 A D A H 1 2 1
Series Servomotors Options
SGMJV, SGMAV, SGMPS (Note) 1 : No Options
C : 24-VDC Brake
Rated Output
See the table above.
Shaft End
Voltage 0 : Flange Output
See the table above. 2 : Straight, Without Key
6 : Straight, Key, Tap
Serial Encoder
See the table above.
Gear Ratio
Design Revision Order B : 1/11 (Not applicable for 50 W models.)
A : Standard C : 1/21 Note : When ordering SGMPS servomotors,
1 : 1/5 add an“-E”at the end of the model
Speed Reducer
2 : 1/9 (Applicable only for 50 W models.) number. This indicates that it is
H : HDS planetary low-backlash gear
7 : 1/33 RoHS-compliant.

72
 MP2000 Series Machine Controller

JUNMA Series (Applicable for MECHATROLINK-2) (Catalog number: KAEP S800000 41)

SERVOPACKs Servomotors
SJDE - 02 A N A S JME - 0 2 A M B 4 1
JUNMA Series Design Revision Order JUNMA Series Options
SERVOPACK A Servomotor 1 : No Option
SJDE SJME C : 24-VDC Brake
Interface Specifications
Applicable Servomotor N : MECHATROLINK-2 Rated Output Shaft End Specifications
Capacity 01 : 100 W 4 : Straight, Key
01 : 100 W 02 : 200 W
02 : 200 W 04 : 400 W Design Revision Order
04 : 400 W 08 : 750 W B
08 : 750 W
Voltage Encoder Specifications
Supply Voltage A : 200 VAC M : Incremental Encoder
A : 200 VAC

Direct-drive Series Linear Series

(Catalog number: KAEP S800000 06)

SERVOPACKs SERVOPACKs

SGDS (Refer to page 71.) SGDS (Refer to page 71.)

(Catalog number: KAEP S800000 32)

SGDV (Refer to page 72.) SGDV (Refer to page 72.)

(Catalog number: KAEP S800000 42)

Servomotors Servomotors
SGMCS - 04 C 3 A 1 1 Moving Coils
Direct-drive Servomotor Option Specifications S G L G W - 40 A 140 A P
1 : Without options Linear Series Option
Rated Torque Servomotors P : With Hall Sensor
Small-capacity Medium-capacity Flange Specifications C : Forced Cooling
Models Models 1 : C face Motor Model H : With Hall Sensor
(Mounted on
G : Coreless + Forced Cooling
02 : 2 N・m 45 : 45 N・m non-load side)*1
04 : 4 N・m 80 : 80 N・m (Mounted on load side)*2 F : Iron-core F Blank : Without Hall Sensor
05 : 5 N・m 1A : 110 N・m 3 : C face*2 T : Iron-core T
07 : 7 N・m 1E : 150 N・m (Mounted on Design Revision Order
08 : 8 N・m 2Z : 200 N・m non-load side) Part Type A, B・・・
10 : 10 N・m 4 : C face*1 W : Moving Coils H : High-efficiency Type
14 : 14 N・m (With cable on side)
16 : 16 N・m Magnet Height Coil Length
17 : 17 N・m Design Revision Order
25 : 25 N・m Supply Voltage
A, B・・・ A : 200 VAC
35 : 35 N・m
D : 400 VAC
Encoder Specifications
Motor Outer Diameter 3 : 20-bit absolute*3 Magnetic Way
B : 135 mm E : 290 mm (Standard)
C : 175 mm M : 280 mm D : 20-bit incremental S G L G M - 40 225 C
D : 230 mm N : 360 mm (Optional)
Linear Series Design Revision Order
Servomotors A, B・・・
* 1 : Only for small-capacity models.
* 2 : Only for medium-capacity models.
Motor Model Length of Magnetic Way
* 3 : Without multiturn data
See the table above.
Magnet Height
AC Servo Drives

Part Type
M : Magnetic Way

73
 AC Servo Drives

-Stick Series (Catalog number: KAEP S800000 33)

SERVOPACKs Servomotors (Integrated Model)

SGDS (Refer to page 71.)

Moving Coils and Magnetic Way
S G L C - D16 A 085 A P - 750 A
SGDV (Refer to page 72.) Linear Series Design Revision Order
Linear Servomotors of Magnetic Way
A, B・・・
Motor Model
C : Cylindrical Type Length of Magnetic Way
See the table below.
Magnetic Way
Outer Diameter Hall Sensor Specification
See the table below. P : With a hall sensor
(All models)
Supply Voltage
A : 200 VAC Design Revision Order of
Moving Coils
A, B・・・

Length of Moving Coils

See the table below.

Servomotors (Non-integrated Model)

Moving Coils Magnetic Way
SGL C W - D 16 A 085 A P SGL C M - D 16 300 A
Linear Series Linear Series
Linear Servomotors Linear Servomotors

Motor Model Motor Model

C : Cylindrical Type C : Cylindrical Type

Part Type Part Type

W : Moving Coils M : Magnetic Way

Magnetic Way Outer Diameter

D16 : 16 mm D20 : 20 mm D16 : 16 mm D20 : 20 mm
D25 : 25 mm D32 : 32 mm D25 : 25 mm D32 : 32 mm

Supply Voltage Length of Magnetic Way

A : 200 VAC
Magnetic Way
Magnetic Way Magnetic Way
Outer Diameter
Length of Moving Coils Length Code Length mm
Code
Magnetic Way Coil Coil 300 300
Outer Diameter Length Length D16 510 510
Code Code mm 750 750
085 85 350 350
D16 115 115 D20 590 590
145 145 870 870
100 100 450 450
D20 135 135 D25 750 750
170 170 1110 1110
125 125 600 600
D25 170 170 D32 1020 1020
215 215 1500 1500
165 165
D32 225 225 Design Revision Order
285 285 A, B・・・

Design Revision Order

A, B・・・

Hall Sensor Specification (All models)

P : With a hall sensor

Note : An integrated model is the standard model when ordering a servomotor from the -Stick series.
Contact your Yaskawa representative to order a servomotor with only moving coils or a magnetic way.

74
Ordering Reference MP2000 Series Machine Controller

Order List
Notes :1 If the model number has“-E”, the product is compliant with RoHS directives.
2 If the model number has“(-E)”, both RoHS-compliant and non RoHS-compliant products are available. Contact your Yaskawa representative for details.

Controller Main Units, Modules, and Support Tools

Classifications Products Model Name Model Specifications Qty
MP2100 board*1 MP2100 JAPMC-MC2100 (-E) 1 channel for MECHATROLINK-2, 5-point input and 4-point output
MP2100M board*1 MP2100M JAPMC-MC2140 (-E) 2 channels for MECHATROLINK-2, 5-point input and 4-point output
High-speed MP2100
MP2101 board* 1 MP2101 JAPMC-MC2102-E
1 channel for MECHATROLINK-2, 5-point input and 4-point output
High-speed MP2100M
MP2101M board*1 MP2101M JAPMC-MC2142-E
2 channels for MECHATROLINK-2, 5-point input and 4-point output
High-speed MP2100, Compatible with M-3
MP2101T board*1 MP2101T JAPMC-MC2102T-E
1 channel for MECHATROLINK-3, 5-point input and 4-point output
High-speed MP2100M, Compatible with M-3
MP2101TM board*1 MP2101TM JAPMC-MC2142T-E
2 channels for MECHATROLINK-3, 5-point input and 4-point output
MBU-01 JEPMC-BU2200 (-E) 100 VAC/200 VAC input base unit (9 slots)
MP2200 base unit*1 MBU-02 JEPMC-BU2210 (-E) 24 VDC input base unit (9 slots)
MBU-03 JEPMC-BU2220-E 24 VDC input base unit (4 slots)
MP2300 basic module 24 VDC input, 1 channel for MECHATROLINK-2, I/O
MP2300 JEPMC-MP2300 (-E)
(CPU module included) A battery (JZSP-BA01) for backup data is provided.
24 VDC input, 1 channel for MECHATROLINK-2,
MP2310 basic module MP2310 JEPMC-MP2310-E 1 channel for Ethernet (100 Mbps)
A battery (JZSP-BA01) for backup data is provided.
1 channel for MECHATROLINK-2,
1 channel for Ethernet (100 Mbps) 1-point output
A battery (JZSP-BA01) for backup data is provided.
MP2300S basic module MP2300S JEPMC-MP2300S-E
One terminator [JEPMC-W6022 (-E)] is provided.
Machine Controller
One set of fixtures for mounting a module on DIN rail
Main Units
(JEPMC-OP300) is provided.

1 channel for MECHATROLINK-2,

MP2400 module MP2400 JEPMC-MP2400-E 1 channel for Ethernet (100 Mbps) 1-point output
A battery (JZSP-BA01) for backup data is provided.
JEPMC-MP2500-NP0-E 15-inch panel integrated type, 1 channel for MECHATROLINK-2
MP2500 MP2500
JEPMC-MP2500-NP1-E 12.1-inch panel integrated type, 1 channel for MECHATROLINK-2
JEPMC-MP2540-NP0-E 15-inch panel integrated type, 2 channels for MECHATROLINK-2
MP2500M
JEPMC-MP2540-NP1-E 12.1-inch panel integrated type, 2 channels for MECHATROLINK-2
MP2500M
JEPMC-MP254E-NP0-E 15-inch panel integrated type, 2 channels for MECHATROLINK-2 + EXIOIF
MP2500ME
JEPMC-MP254E-NP1-E 12.1-inch panel integrated type, 2 channels for MECHATROLINK-2 + EXIOIF
MP2500B MP2500B JEPMC-MP2500-NB0-E Separated PC Box, 1 channel for MECHATROLINK-2
MP2500MB MP2500MB JEPMC-MP2540-NB0-E Separated PC Box, 2 channels for MECHATROLINK-2
MP2500B Separated PC Box, 1 channel for MECHATROLINK-2
MP2500B-OP JEPMC-MP250U-NB0-E
-OP + Spare slot × 1*2
MP2500MB Separated PC Box, 2 channels for MECHATROLINK-2
MP2500MB-OP JEPMC-MP254U-NB0-E
-OP + Spare slot × 1*2
10.4-inch touch panel PNL-10 JEPMC-OP25PNL-10-E For panel-separated type, 10.4-inch touch panel
For MP2500

12.1-inch touch panel PNL-12 JEPMC-OP25PNL-12-E For panel-separated type, 12.1-inch touch panel
LVDS cable : 25 cm LVDS-A25 JEPMC-OP25LV-A25-E Monitor cable for panel-separated type: 25 cm
LVDS cable : 3 m LVDS-03 JEPMC-OP25LV-03-E Monitor cable for panel-separated type: 3 m
・ AC Servo Drives

LVDS cable : 10 m LVDS-10 JEPMC-OP25LV-10-E Monitor cable for panel-separated type: 10 m

CPU for MP2200
CPU-01 module CPU-01 JAPMC-CP2200 (-E)
A battery (JZSP-BA01) for backup data is provided.
CPU module for MP2200, with CF card slot and USB port
CPU-02 module CPU-02 JAPMC-CP2210 (-E)
A battery (JZSP-BA01) for backup data is provided.
CPU module for MP2200, with CF card slot,
CPU Module CPU-03 module CPU-03 JAPMC-CP2220-E 1 channel for Ethernet (100 Mbps)
Ordering Reference

A battery (JZSP-BA01) for backup data is provided.

High-speed CPU for MP2200, 1 channel for Ethernet (100 Mbps)
CPU-04 module CPU-04 JAPMC-CP2230-E
A battery (JZSP-BA01) for backup data is provided.
Module with CPU and SVC-01 functions,
MPU-01 module MPU-01 JAPMC-CP2700-E
1 channel for MECHATROLINK-3

*12 :: Battery (JZSP-BA01) for backup data is sold separately. (Cont'd)

* One MP2000-series optional module can be mounted in the spare slot.

75
 Ordering Reference

Controller Main Units, Modules, and Support Tools (Cont'd)

Classifications Products Model Name Model Specifications Qty
Expansion interface module EXIOIF JAPMC-EX2200 (-E) Expansion interface for MP2200
Connection
Expansion interface board MP2100MEX JAPMC-EX2100 (-E) Expansion interface board for MP210  M and MP2500M
Module
Repeater − JEPMC-REP2000 (-E) MECHATROLINK-2 repeater
SVB-01 JAPMC-MC2310 (-E) 1 channel for MECHATROLINK-2
Motion control module
SVC-01 JAPMC-MC2320-E 1 channel for MECHATROLINK-3
Motion Modules
Analog motion control module SVA-01 JAPMC-MC2300 (-E) Analog-output 2-axis servo control
Pulse Output Motion Control Module PO-01 JAPMC-PL2310-E Pulse-output, 4-axis servo control
General-purpose serial
217IF-01 JAPMC-CM2310 (-E) RS-232C/RS-422 communication
communication module
Ethernet 218IF-01 JAPMC-CM2300 (-E) RS-232C/Ethernet communication
communication module 218IF-02 JAPMC-CM2302-E RS-232C/Ethernet (100 Mbps) communications
DeviceNet communication module 260IF-01 JAPMC-CM2320 (-E) RS-232C/DeviceNet communication
PROFIBUS communication module 261IF-01 JAPMC-CM2330 (-E) RS-232C/PROFIBUS communication
Communication FL-net communication module 262IF-01 JAPMC-CM2303-E Cyclic transmission and message transmission
Modules EtherNet / IP communication module 263IF-01 JAPMC-CM2304-E I/O transmission and Explicit message transmission
EtherCAT communication module 264IF-01 JAPMC-CM2305-E As a slave station of EtherCAT
CompoNet communication module 265IF-01 JAPMC-CM2390-E CompoNet communication
MPLINK 215AIF-01
JAPMC-CM2360 (-E) RS-232C/MPLINK communication
communication module MPLINK
CP-215 215AIF-01
JAPMC-CM2361 RS-232C/CP-215 communication
communication module CP-215
16-point input, 16-point output (sink mode output),
LIO-01 JAPMC-IO2300 (-E)
pulse input: 1 channel
16-point input, 16-point output (source mode output),
LIO-02 JAPMC-IO2301 (-E)
pulse input: 1 channel
I/O module LIO-04 JAPMC-IO2303 (-E) 32-point input and 32-point output (sink mode output)
LIO-05 JAPMC-IO2304 (-E) 32-point input and 32-point output (source mode output)
I/O Modules Digital input: 8 points, digital output: 8 points,
LIO-06 JAPMC-IO2305-E analog input: 1 channel, analog output: 1 channel,
pulse counter: 1 channel
Output module DO-01 JAPMC-DO2300 (-E) 64-point output (sink mode output)
Analog input module AI-01 JAPMC-AN2300 (-E) 8 channels for analog input
Analog output module AO-01 JAPMC-AN2310-E 4 channels for analog output
Counter module CNTR-01 JAPMC-PL2300-E 2 channels, selection of 2 input circuits: 5-V differential or 12 V.
IO2310 JEPMC-IO2310 (-E) 64-point input and 64-point output (sink mode output)
64-point I/O module
IO2330 JEPMC-IO2330 (-E) 64-point input and 64-point output (source mode output)
Counter module PL2900 JEPMC-PL2900 (-E) Reversible counter: 2 channels
Distributed I/O Pulse output module PL2910 JEPMC-PL2910 (-E) Pulse output: 2 channels
Modules Analog input module AN2900 JEPMC-AN2900 (-E) Analog input: − 10 V to +10 V, 4 channels
I/O Modules for Analog output module AN2910 JEPMC-AN2910 (-E) Analog output: − 10 V to +10 V, 2 channels
MECHATROLINK-2 16-point input module IO2900-E JAMSC-IO2900-E 16-point input
16-point output module IO2910-E JAMSC-IO2910-E 16-point output (sink mode output)
8-point I/O module IO2920-E JAMSC-IO2920-E 8-point input and 8-point output (sink mode output)
Relay output module IO2950-E JAMSC-IO2950-E 8 contact outputs
Hub module HUB JEPMC-MT2000-E −
Network analyzer module MTNA-01 JEPMC-MT2010-E −
Network adapter module MTNA-02 JEPMC-MT2020-E −
MECHATROLINK-3
64-point I/O module MTD2310 JEPMC-MTD2310-E 64-point input and 64-point output (sink mode output)
Compatible
Analog Input Module MTA2900 JEPMC-MTA2900-E Analog input: 8 channels
Modules
Analog Output Module MTA2910 JEPMC-MTA2910-E Analog output: 4 channels
Pulse Input Module MTP2900 JEPMC-MTP2900-E Pulse input: 2 channels
Pulse Output Module MTP2910 JEPMC-MTP2910-E Pulse output: 4 channels
The programming software to support you from system design
MPE720 version 5* 3 − CPMC-MPE720 to maintenance
Intuitive ladder programming and editing functions
Integrated Cam data generations
Engineering Tool MPE720 Ver.5 : Applicable for Windows 2000(SP1 or later)/XP/Vista/7.
MPE720 version 6*3 − CPMC-MPE770 MPE720 Ver.6 : Applicable for Windows 2000 (SP1 or later) /XP/Vista/7.
Note: MPE720 Ver.6 is not available with machine controllers
in the MP900 series.

76
 MP2000 Series Machine Controller

Classifications Products Model Name Model Specifications Qty

API Motion API*3 − CPMC-MPA700 Header file, library, DLL, driver, and manual
For MP2500 and MP2500M
MotionScreen
Screen-creation Tool − CPMC-MPMS700B For HMI development without programming
Builder*3
Provides API for VC.
Controller Data Monitors the machine-controller data on an Excel
MPLOGGER*3 − CPMC-MPG700
Monitoring Tool sheet.
Data Transfer Tool MPLoader*3 − CPMC-MPL700C Loads data to Machine Controller without using MPE720.
Automatic Compression/
MPLoadMaker*3 − CPMC-MPL710 Creates an auto transfer file with application data.
Transfer Tool
Acts as middleware between the MP2000 Series Machine
Communication Controller and the host PC, so a COM interface can be used
MPScope*3 − CPMC-MPS700
Middleware to execute the functions for the register operations even if
data is received from a variety of communications networks.
Network Analyzer A software program used to set parameters for a
Analyzer Tool − CMPC-NWAN710
Tool Network Analyzer module and monitor the module.

*3 : Only one license is provided for each product, so only one set can be installed on one personal computer.
Cables and Connectors
Name Model Length m Specifications Qty
JEPMC-W6012-A2-E 0.2 With MECHATROLINK-3 connectors on both ends
JEPMC-W6012-A5-E 0.5
JEPMC-W6012-01-E 1.0
JEPMC-W6012-02-E 2.0
JEPMC-W6012-03-E 3.0
JEPMC-W6012-04-E 4.0
JEPMC-W6012-05-E 5.0
JEPMC-W6012-10-E 10.0
JEPMC-W6012-20-E 20.0
JEPMC-W6012-30-E 30.0
JEPMC-W6012-50-E 50.0
Cable for
JEPMC-W6013-10-E 10.0 With ring core
MECHATROLINK-3
JEPMC-W6013-20-E 20.0
JEPMC-W6013-30-E 30.0
JEPMC-W6013-50-E 50.0
JEPMC-W6013-75-E 75.0
JEPMC-W6014-A5-E 0.5 With a connector on the controllers end
JEPMC-W6014-01-E 1.0
JEPMC-W6014-03-E 3.0
JEPMC-W6014-05-E 5.0
JEPMC-W6014-10-E 10.0
JEPMC-W6014-30-E 30.0
JEPMC-W6014-50-E 50.0
JEPMC-W6002-A5 (-E) 0.5 With connectors on both ends
JEPMC-W6002-01 (-E) 1.0
JEPMC-W6002-03 (-E) 3.0
JEPMC-W6002-05 (-E) 5.0
JEPMC-W6002-10 (-E) 10.0
Ordering Reference

JEPMC-W6002-20 (-E) 20.0

JEPMC-W6002-30 (-E) 30.0
JEPMC-W6002-40 (-E) 40.0
Cable for
JEPMC-W6002-50 (-E) 50.0
MECHATROLINK-2
JEPMC-W6003-A5 (-E) 0.5 With ring core
and MPLINK
JEPMC-W6003-01 (-E) 1.0
JEPMC-W6003-03 (-E) 3.0
JEPMC-W6003-05 (-E) 5.0
JEPMC-W6003-10 (-E) 10.0
JEPMC-W6003-20 (-E) 20.0
JEPMC-W6003-30 (-E) 30.0
JEPMC-W6003-40 (-E) 40.0
JEPMC-W6003-50 (-E) 50.0
(Cont'd)
77
 Ordering Reference

Cables and Connectors (Cont'd)

Name Model Length m Specifications Qty
JEPMC-W6011-A5 0.5 With a connector on the controller end
JEPMC-W6011-01 1.0 Notes: 1 Never use these cables with MECHATROLINK-2.
JEPMC-W6011-03 3.0 2 When the MP2000 Series Machine Controller is connected
JEPMC-W6011-05 5.0 to a 1 series servodrives, use these cables.
MPLINK Cable JEPMC-W6011-10 10.0
JEPMC-W6011-20 20.0
JEPMC-W6011-30 30.0
JEPMC-W6011-40 40.0
JEPMC-W6011-50 50.0
For MECHATROLINK-2
Terminator JEPMC-W6022 (-E) −

For MECHATROLINK-2 cable

Ring Core JEPMC-W6021 −

With connectors on both ends

JEPMC-W2040-A5 0.5

SVA-01 end
JEPMC-W2040-01 1.0 BAT OTF
BAT0 OTR
/BRK+ EXT
/BRK-
For analog monitor
JEPMC-W2040-03 3.0
Connection Cable for
SVA-01 With a connector on the controller end
JEPMC-W2041-A5 0.5

JEPMC-W2041-01 1.0

JEPMC-W2041-03 3.0

Connection cable for MPE720-installed PC

RS-232C Communication Cable JEPMC-W5311-03-E 2.5
(217IF-01, 218IF-01, 260IF-01, PC side : Communication
D-sub, 9-pin, module side:
261IF-01, and 215AIF-01) and female D-sub, 9-pin,
JEPMC-W5311-15-E 15.0 and male

No ready-made cable available. Prepare a cable that meets these specifications. :

RS-422/485 Communication Connector : 10114-3000PE made by Sumitomo 3M Co., Ltd.
Cable for 217IF-01 Shell : 10314-52A0-008 made by Sumitomo 3M Co., Ltd.
Cable : Max. length 300 m, shielded (Use shielded cable and a modem to reduce noise.)
Ethernet Communication
Use 10Base-T cross or straight cables.
Cable for 218IF-01
DeviceNet Communication Use DeviceNet cables.
Cable for 260IF-01 Refer to the ODVA-J web site. (http://www.odva.astem.or.jp/)
Use PROFIBUS cables. Refer to the PROFIBUS web site (http://www.profibus.jp/).
PROFIBUS Communication
Make sure the cable outlet position and direction so that it will not stand in the way of the RS-232C
Cable for 261IF-01
connector connection when selecting a cable.
No ready-made cable available. Prepare a cable that meets these specifications.:
CP-215 Communication Wire: YS-IPEV-SB (75 Ω ) or YS-IPEV-S (77 Ω ) made by Fujikura Ltd.
Cable for 215AIF-01 Connector on module end: MR-8RFA4 (G) made by Honda Tsushin Kogyo, Co., Ltd.
Connector on cable end: MR-8M (G) made by Honda Tsushin Kogyo, Co., Ltd.
JEPMC-W2060-A5-E 0.5 With a connector
I/O Cable for MP2300 JEPMC-W2060-01-E 1.0 on the MP2300 end
JEPMC-W2060-03-E 3.0
JEPMC-W2061-A5 0.5 With a connector
I/O Cable for LIO-01 and on the LIO-01/-02 end
JEPMC-W2061-01 1.0
LIO-02
JEPMC-W2061-03 3.0

78
 MP2000 Series Machine Controller

Name Model Length m Specifications Qty

JEPMC-W6060-05-E 0.5 With a connector
I/O Cable for LIO-04, LIO-05, on the LIO-04/LIO-05/
JEPMC-W6060-10-E 1.0
DO-01, and PO-01 DO-01 end
JEPMC-W6060-30-E 3.0
JEPMC-W2064-A5-E 0.5 With a connector on the
I/O cable for LIO-06 JEPMC-W2064-01-E 1.0 LIO-06 end, 50 pins
JEPMC-W2064-03-E 3.0 (With shielded wire)
JEPMC-W6080-05-E 0.5 With a connector
Input Cable for AI-01 JEPMC-W6080-10-E 1.0 on the AI-01 end
JEPMC-W6080-30-E 3.0
JEPMC-W6090-05-E 0.5 With a connector
Output Cable for AO-01 JEPMC-W6090-10-E 1.0 on the AO-01 end
JEPMC-W6090-30-E 3.0
JEPMC-W2063-A5-E 0.5 With a connector
on the CNTR-01 end

JEPMC-W2063E-
I/O Cable for CNTR-01 JEPMC-W2063-01-E

10340
1.0

3M
JEPMC-W2063-03-E 3.0
JEPMC-W2091-A5 0.5 With connectors
EXIOIF Cable JEPMC-W2091-01 1.0 on both ends
JEPMC-W2091-2A5 2.5
I/O Cable for MP2100 (M), JEPMC-W2062-A5 0.5 With a connector
MP2101 (M), MP2101T (M), JEPMC-W2062-01 1.0 on the controller end.
MP2500 (B), and MP2500M (B) JEPMC-W2062-03 3.0
JEPMC-W5410-05-E 0.5 With a connector
I/O Cable for IO2310 and on the IO2310/IO2330
JEPMC-W5410-10-E 1.0
IO2330 end
JEPMC-W5410-30-E 3.0
LVDS cable for JEPMC-OP25LV-A25-E 0.25 Cable for connecting
MP2500B and MP2500MB JEPMC-OP25LV-03-E 3.0 a panel-separated
(For panel-separated types only) JEPMC-OP25LV-10-E 10.0 module

Programming Cable for JEPMC-W2010-03 3.0 Serial cable to connect the PC for program development and debugging.
MP2500, MP2500M, JEPMC-W2010-05 5.0 PC end:
D-sub, 9-pin, Motion-board end
MP2500B, and MP2500MB JEPMC-W2010-15 15.0 and female

Battery Extension Cable With connectors on both ends

for MP2100 (M), MP2101 (M), JEPMC-W2090-01 1.0
and MP2101T (M)
T- branch Connector JEPMC-OP2310-E − MPLINK communication connector for 215AIF-01
MR Connector Converter JEPMC-OP2320 − CP-215 communication connector for 215AIF-01

Ordering Reference

79
 Ordering Reference

Optional Products
Applicable Machine Controller Product Name Product Model Specifications Qty
Lithium battery
MP2000 Series
JZSP-BA01 For data backup, 3.6 V
Machine Controllers

Protective cover

JEPMC-OP2300 Front cover for empty slot

MP2200,
MP2300 Module mounting fixtures

Used to mount a module on DIN rail

JEPMC-OP300
(1 pair in a set)

CompactFlash
MP2200 (CPU-02),
for data storage
MP2500, MP2500M, CFI-256MDG Type 1 , 256 Mbytes
MP2500B, MP2500MB

CompactFlash
adapter (PCMCIA)
CFC-ADP03 CompactFlash adapter for PCMCIA connectors

Screen protection
CA3-DFS15-01 For integrated 15-inch touch panel
sheets

CA7-DFS12-01 For integrated 12-inch touch panel

Replaceable backlights
MP2100 (M), CA7-BLU15-01 For integrated 15-inch touch panel
MP2101 (M),
MP2101T (M), CA3-BLU12-01 For integrated 12-inch touch panel
MP2500,
MP2500M, Gaskets
CA7-WPG15-01 For integrated 15-inch touch panel
MP2500B,
MP2500MB
CA7-WPG12-01 For integrated 12-inch touch panel

Brackets
Brackets used for installing the MP2500/MP2500M
CA3-ATFALL-01
controllers (2 sets of 4/set)

Battery kit
A kit containing a lithium battery, cable (1 m), and
JEPMC-OP2500
clip (Mounting screws are not included.)

Unit base
MP2300S, JEPMC-OP2300S-E
Attachment for installing the machine controller
MP2400 JEPMC-OP2400-E

80
Quick Reference-1 MP2000 Series Machine Controller

List of Optional Modules

: Available, × : Not available, : Available only with devices used for expansion, : Version number of the software for the CPU in the machine controller

MP2100 (M), MP2300,

Classification Model Specifications MP2101 (M), MP2200 MP2310, MP2500 (M) (B)
MP2101T (M) MP2300S
CPU-01 CPU × × ×
CPU-02 USB+CFIF × × ×
CPU CPU-03 Ethernet+CFIF × × ×
Modules CPU-04 CPU+Ethernet × × ×
Version 2.73 or later
MPU-01 CPU+SVC-01 Version 2.73 or later Version 2.73 or later Version 2.73 or later
(Cannot be used with MP2300.)

EXIOIF Expansion ×
Expansion
Expansion I/F board for MP 2100 M ，
Module MP2100MEX × ×
MP2101M，MP2101TM and MP2500M
217IF-01 Serial communication
218IF-01 Ethernet communication
218IF-02 Ethernet communication Version 2.60 or later Version 2.60 or later Version 2.60 or later Version 2.60 or later
260IF-01 DeviceNet communication
261IF-01 PROFIBUS communication
Communication
262IF-01 FL-net Version 2.63 or later Version 2.63 or later Version 2.63 or later Version 2.63 or later
Modules
263IF-01 EtherNet / IP Version 2.64 or later Version 2.64 or later Version 2.64 or later Version 2.64 or later
264IF-01 EtherCAT Version 2.73 or later Version 2.73 or later Version 2.73 or later Version 2.73 or later
265IF-01 CompoNet Version 2.74 or later Version 2.74 or later Version 2.74 or later Version 2.74 or later
CP-215 communication Version 2.41 or later Version 2.41 or later Version 2.41 or later Version 2.41 or later
215AIF-01
MPLINK Version 2.41 or later Version 2.41 or later Version 2.41 or later Version 2.41 or later
Optional Modules

SVB-01 MECHATROLINK-2 Version 2.02 or later Version 2.02 or later Version 2.02 or later Version 2.02 or later
Motion SVC-01 MECHATROLINK-3 Version 2.70 or later Version 2.70 or later Version 2.70 or later Version 2.70 or later
Modules SVA-01 Analog output Version 2.20 or later Version 2.20 or later Version 2.20 or later Version 2.20 or later
PO-01 Pulse output Version 2.44 or later Version 2.44 or later Version 2.44 or later Version 2.44 or later
16-point input, 16-point output (sink
LIO-01
mode output), pulse input: 1 channel
16-point input, 16-point output (source
LIO-02
mode output), pulse input: 1 channel
LIO-04 32-point input/32-point output (sink mode output) Version 2.20 or later Version 2.20 or later Version 2.20 or later Version 2.20 or later
LIO-05 32-point input/32-point output (source mode output) Version 2.32 or later Version 2.32 or later Version 2.32 or later Version 2.32 or later

Digital input: 8 points, digital output: 8 points (sink),

LIO-06 analog input: 1 channel, analog output: 1 channel, Version 2.63 or later Version 2.63 or later Version 2.63 or later Version 2.63 or later
pulse counter: 1 channel
DO-01 64-point output (sink mode output) Version 2.32 or later Version 2.32 or later Version 2.32 or later Version 2.32 or later
I/O Modules
AI-01 Analog input Version 2.40 or later Version 2.40 or later Version 2.40 or later Version 2.40 or later

Ordering Reference
AO-01 Analog output Version 2.44 or later Version 2.44 or later Version 2.44 or later Version 2.44 or later
CNTR-01 Counter Version 2.44 or later Version 2.44 or later Version 2.44 or later Version 2.44 or later
AFMP-01 AnyWire DB Master (made by Anywire Corporation) Version 2.02 or later Version 2.02 or later Version 2.02 or later Version 2.02 or later
CC-Link Slave Interface Board (made by
AFMP-02-C Version 2.51 or later Version 2.51 or later Version 2.51 or later Version 2.51 or later
Anywire Corporation)
CC-Link Slave Interface with AnyWire DB Master
AFMP-02-CA Version 2.51 or later Version 2.51 or later Version 2.51 or later Version 2.51 or later
Interface Board (made by Anywire Corporation)
A-net/ A-Link Master Unit Module
MPANL00-0 Version 2.46 or later Version 2.46 or later Version 2.46 or later Version 2.46 or later
(made by Algo System Co.,Ltd.)
Distributed I/O Modules

MTD2310 64-point input, 64-point output ● Version 2.71 or later ● Version 2.71 or later ● Version 2.71 or later ● Version 2.71 or later
Analog input: 8 channels
Quick Reference

MTA2900 ● Version 2.71 or later ● Version 2.71 or later ● Version 2.71 or later ● Version 2.71 or later
For M-3 MTA2910 Analog output: 4 channels ● Version 2.71 or later ● Version 2.71 or later ● Version 2.71 or later ● Version 2.71 or later
MTP2900 Pulse input: 2 channels ● Version 2.71 or later ● Version 2.71 or later ● Version 2.71 or later ● Version 2.71 or later
MTP2910 Pulse output: 4 channels ● Version 2.71 or later ● Version 2.71 or later ● Version 2.71 or later ● Version 2.71 or later
(Cont'd)

81
 Quick Reference-1
List of Optional Modules (Cont'd)
: Available, × : Not available, : Available only with devices used for expansion, : Version number of the software for the CPU in the machine controller

MP2100 (M), MP2300,

Classification Model Specifications MP2101 (M), MP2200 MP2310, MP2500 (M) (B)
MP2101T (M) MP2300S
IO2310 64-point input, 64-point output
IO2330 64-point input, 64-point output
PL2900 Counter
PL2910 Pulse output
AN2900 Analog input
Distributed I/O Modules

AN2910 Analog output

For M-2
IO2900-E 16-point input module
IO2910-E 16-point output module
IO2920-E 8-point I/O module
IO2950-E Relay output module
Bit-type distributed I/O terminal
AB023-M1
(made by Anywire Corporation)
120AVI02030 Analog input, 4 channels
120AVO01030 Analog output, 2 channels
For M- 1
120EHC21140 Reversible counter, 2 channels
120MMB20230 Pulse output, 2 channels
REP2000 MECHATROLINK-2 repeater
Others

For M-2 MYVIS

Image-processing unit
YV250/YV260
Note: M-1 stands for MECHATROLINK-1 , M-2 for MECHATROLINK-2 , and M-3 for MECHATROLINK-3.

82
Quick Reference-2 MP2000 Series Machine Controller

Combination of Machine Controllers and JUNMA Series

: Available
MP2100 (M), MP2101 (M), MP2101T (M) Board
MP2200 SVA-01 Module
MP2300 SVB-01 Module
Machine Controllers
MP2310 PO-01 Module
MP2300/MP2310/MP2300S Basic Module, MP2400
MP2500 (B), MP2500M (B)

AP
AN
SERVOPACK Model
Servomotor : Rated Output

- 
- 
Servomotor Model

  
  

SJDE
SJDE
Servomotor Series
SJME-01AM 100 W
Small-capacity

SJME SJME-02AM 200 W

SJME-04AM 400 W
SJME-08AM 750 W

Quick Reference-3
Combination of Machine Controllers and Series
: Available
MP2100 (M), MP2101 (M), MP2101T (M) Board ●
MP2200 SVA-01 Module ● ●
MP2300 SVB-01 Module ●
Machine Controllers
MP2310 PO-01 Module ● ●
MP2300/MP2310/MP2300S Basic Module, MP2400 ●
MP2500 (B), MP2500M (B) ●

SERVOPACK Model

01
02
12
Servomotor : Rated Output

- 
- 
- 
  

  

  
Servomotor Model
SGDS
SGDS
SGDS
Servomotor Series
SGMMJ-A1B 10 W
capacity
Small-

Super High Power Rate Series

SGMMJ-A2B 20 W
SGMMJ
SGMMJ-A3B 30 W

Quick Reference

83
 Quick Reference-4
Combination of Machine Controllers and Series
: Available
MP2100 (M), MP2101 (M), MP2101T (M) Board
MP2200 SVA-01 Module
MP2300 SVB-01 Module
Machine Controllers
MP2310 PO-01 Module
MP2300/MP2310/MP2300S Basic Module, MP2400
MP2500 (B), MP2500M (B)

05
11
15
SERVOPACK Model

01
Servomotor : Rated Output

  -   

  -   

  -   
  -   
Servomotor Model

SGDV
SGDV
SGDV
SGDV
Servomotor Series
SGMJV-A5A 50 W
SGMJV SGMJV-01A 100 W
SGMJV-C2A 150 W
SGMJV-02A 200 W
SGMJV-04A 400 W
SGMJV-06A 600 W
SGMJV-08A 750 W
SGMAV-A5A 50 W
Small-capacity

SGMAV SGMAV-01A 100 W

SGMAV-C2A 150 W
SGMAV-02A 200 W
SGMAV-04A 400 W
SGMAV-06A 550 W
SGMAV-08A 750 W
SGMAV-10A 1.0 kW
SGMPS-01A 100 W
SGMPS SGMPS-02A 200 W
SGMPS-04A 400 W
SGMPS-08A 750 W
SGMPS-15A 1.5 kW
SGMSV-10 1.0 kW
SGMSV SGMSV-15 1.5 kW
SGMSV-20 2.0 kW
SGMSV-25 2.5 kW
SGMSV-30 3.0 kW
SGMSV-40 4.0 kW
SGMSV-50 5.0 kW
Medium-capacity

SGMSV-70A 7.0 kW
SGMGV-03 0.3 kW
SGMGV SGMGV-05 0.45 kW
SGMGV-09 0.85 kW
SGMGV-13 1.3 kW
SGMGV-20 1.8 kW
SGMGV-30 2.9 kW
SGMGV-44 4.4 kW
SGMGV-55 5.5 kW
SGMGV-75 7.5 kW
SGMGV-1A 11 kW
SGMGV-1E 15 kW

84
Quick Reference-5 MP2000 Series Machine Controller

Combination of Machine Controllers and Direct Drives / Linear Drives

: Available
MP2100 (M), MP2101 (M), MP2101T (M) Board
MP2200 SVA-01 Module
MP2300 SVB-01 Module
Machine Controllers
MP2310 PO-01 Module
MP2300/MP2310/MP2300S Basic Module, MP2400
MP2500 (B), MP2500M (B)

01
05
11
15
SERVOPACK Model

Direct-drive : Rated Torque, Linear : Peak Force

-   
-   
-   
-   
  
  
  
  
Servomotor Model

SGDV
SGDV
SGDV
SGDV
Servomotor Series
SGMCS-02B 2.0 Nxm
Small-capacity Series SGMCS-05B 5.0 Nxm
SGMCS SGMCS-07B 7.0 Nxm
SGMCS-04C 4.0 Nxm
SGMCS-10C 10.0 Nxm
SGMCS-14C 14.0 Nxm
Series

SGMCS-08D 8.0 Nxm

SGMCS-17D 17.0 Nxm
Direct-drive

SGMCS-25D 25.0 Nxm

SGMCS-16E 16.0 Nxm
SGMCS-35E 35.0 Nxm
SGMCS-45M 45.0 Nxm
Medium-capacity Series SGMCS-80M 80 Nxm
SGMCS SGMCS-1AM 110 Nxm
SGMCS-80N 80 Nxm
SGMCS-1EN 150 Nxm
SGMCS-2ZN 200 Nxm
SGLGW-30A050 40 N
SGLGW Coreless GW SGLGW-30A080 80 N
SGLGW-40A140 140 N
SGLGW-40A253 280 N
SGLGW-40A365 420 N
SGLGW-60A140 220 N
SGLGW-60A253 440 N
SGLGW-60A365 660 N
SGLGW-90A200 1300 N
SGLGW-90A370 2200 N
SGLGW-90A535 3000 N
SGLFW-20A090 86 N
SGLFW Iron-core FW SGLFW-20A120 125 N
SGLFW-35 120 220 N
Series

SGLFW-35 230 440 N
SGLFW-50 200 600 N
SGLFW-50 380 1200 N
Linear

SGLFW-1Z 200 1200 N
SGLFW-1Z 380 2400 N
SGLTW-20A170A 380 N
SGLTW Iron-core TW SGLTW-20A320A 760 N
SGLTW-20A460A 1140 N
Quick Reference

SGLTW-35A170A 660 N
SGLTW-35A320A 1320 N
SGLTW-35A460A 2000 N
SGLTW-35 170H 600 N
SGLTW-35 320H 1200 N
SGLTW-40 400B 2600 N
SGLTW-40 600B 4000 N
SGLTW-50 170H 900 N
SGLTW-50 320H 1800 N
SGLTW-80 400B 5000 N
SGLTW-80D600B 7500 N
 

85
 Quick Reference-6
Combination of Machine Controllers and -Stick / -Trac
: Available
MP2100 (M), MP2101 (M), MP2101T (M) Board
MP2200 SVA-01 Module
MP2300 SVB-01 Module
Machine Controllers
MP2310 PO-01 Module
MP2300/MP2310/MP2300S Basic Module, MP2400
MP2500 (B), MP2500M (B)

01
05
11
15
SERVOPACK Model
Servomotor : Rated Output

-   
-   
-   
-   
Direct-drive : Rated Torque, Linear : Peak Force

  

  

  

  
SGDV
SGDV
SGDV
SGDV
Servomotor Model
Servomotor Series
SGLC-D16A085 60 N
SGLC ( -Stick) SGLC-D16A115 90 N
SGLC-D16A145 120 N
SGLC-D20A100 150 N
Cylindrical Type

SGLC-D20A135 225 N
SGLC-D20A170 300 N
SGLC-D25A125 280 N
SGLC-D25A170 420 N
SGLC-D25A215 560 N
SGLC-D32A165 420 N
SGLC-D32A225 630 N
SGLC-D35A285 840 N
SGT F3  -    220 N
-Trac SGT F4 -    440 N
SGT F9  -    600 N
Linear Slider

SGT FA  -    1200 N

SGT GD  -    140 N
SGT GE  -    280 N
SGT GF  -    420 N
SGT GG -    220 N
SGT GH -    440 N
SGT GI  -    660 N

86
 MP2000 Series Machine Controller

Third-party Trademarks in this Catalog

Adobe Reader is a registered trademark of Adobe Systems Incorporated.

AnyWire is a registered trademark of the Anywire Corporation.
Celeron and Pentium is a registered trademark of the Intel Corporation.
Compact Flash is a registered trademark of the SanDisk Corporation, and the CompactFlash and CF logos and trademarks are
Quick Reference

licensed at no charge and royalty-free to CompactFlash Association (CFA) members.

Eden is a registered trademark of VIA Technologies, Inc.
Ethernet is a registered trademark of the Xerox Corporation.
Geode is a registered trademark of Advanced Micro Devices, Inc.
MagicConnect is a registered trademark of the NTT IT Corporation.
UNI-WIRE is a registered trademark of Kuroda Precision Industries Ltd.
Windows 7, Windows 2000, Windows XP, Windows XP Embedded, Windows 98SE, Windows ME, Windows CE, Windows
Vista, Access, Excel, Visual Basic, Visual C, Visual C++, and Internet Explorer are trademarks or registered trademarks of the
Microsoft Corporation.

This catalog may contain other proprietary names and copyright notices.
Trademark symbols (TM and ®) do not appear with product or company names in this catalog.

87
 Read Before Ordering

(1) Details of Warranty

Warranty Period
The warranty period for a product that was purchased (hereafter called“delivered product”) is one year from the time
of delivery to the location specified by the customer or 18 months from the time of shipment from the Yaskawa
factory, whichever is sooner.
Warranty Scope
Yaskawa shall replace or repair a defective product free of charge if a defect attributable to Yaskawa occurs during
the warranty period above. This warranty does not cover defects caused by the delivered product reaching the end
of its service life and replacement of parts that require replacement or that have a limited service life.
This warranty does not cover failures that result from any of the following causes.
1. Improper handling, abuse, or use in unsuitable conditions or in environments not described in product catalogs or
manuals, or in any separately agreed-upon specifications
2. Causes not attributable to the delivered product itself
3. Modifications or repairs not performed by Yaskawa
4. Abuse of the delivered product in a manner in which it was not originally intended
5. Causes that were not foreseeable with the scientific and technological understanding at the time of shipment from
Yaskawa
6. Events for which Yaskawa is not responsible, such as natural or human-made disasters

(2) Limitations of Liability

1. Yaskawa shall in no event be responsible for any damage or loss of opportunity to the customer that arises due to
failure of the delivered product.
2. Yaskawa shall not be responsible for any programs (including parameter settings) or the results of program
execution of the programs provided by the user or by a third party for use with programmable Yaskawa products.
3. The information described in product catalogs or manuals is provided for the purpose of the customer purchasing
the appropriate product for the intended application. The use thereof does not guarantee that there are no
infringements of intellectual property rights or other proprietary rights of Yaskawa or third parties, nor does it
construe a license.
4. Yaskawa shall not be responsible for any damage arising from infringements of intellectual property rights or other
proprietary rights of third parties as a result of using the information described in catalogs or manuals.

(3) Suitability for Use

1. It is the customer’s responsibility to confirm conformity with any standards, codes, or regulations that apply if the
Yaskawa product is used in combination with any other products.
2. The customer must confirm that the Yaskawa product is suitable for the systems, machines, and equipment used
by the customer.
3 . Consult with Yaskawa to determine whether use in the following applications is acceptable. If use in the
application is acceptable, use the product with extra allowance in ratings and specifications, and provide safety
measures to minimize hazards in the event of failure.
Outdoor use, use involving potential chemical contamination or electrical interference, or use in conditions or
environments not described in product catalogs or manuals
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, vehicle systems,
medical equipment, amusement machines, and installations subject to separate industry or government
regulations
Systems, machines, and equipment that may present a risk to life or property
Systems that require a high degree of reliability, such as systems that supply gas, water, or electricity, or
systems that operate continuously 24 hours a day
Other systems that require a similar high degree of safety
4. Never use the product for an application involving serious risk to life or property without first ensuring that the
system is designed to secure the required level of safety with risk warnings and redundancy, and that the Yaskawa
product is properly rated and installed.
5. The circuit examples and other application examples described in product catalogs and manuals are for reference.
Check the functionality and safety of the actual devices and equipment to be used before using the product.
6. Read and understand all use prohibitions and precautions, and operate the Yaskawa product correctly to prevent
accidental harm to third parties.

(4) Specifications Change

The names, specifications, appearance, and accessories of products in product catalogs and manuals may be
changed at any time based on improvements and other reasons. The next editions of the revised catalogs or
manuals will be published with updated code numbers. Consult with your Yaskawa representative to confirm the
actual specifications before purchasing a product.

88
Full Support MP2000 Series Machine Controller

 e-Mecha Site
To see details on Yaskawa’ s controllers, click Controllers on Yaskawa’
s Products and Technical Information
website, usually referred to as the e-Mecha site. Here, you can find and download drawings, specifications,
dimensions, and other information about the MP2000 Series.
Note: Some information is restricted to members only.

s e-Mecha Site
Yaskawa’

Catalogs and Manuals for Download Product Dimensions

 CD-ROM Manual
A CD-ROM with updated manuals (PDF) for the MP2000 Series
is available. Contact your Yaskawa representative for more
information. Read Before Ordering
■ Hardware and Software Requirement
Items Specifications
CPU Pentium
RAM 64 Mbytes min.
Free Hard Disk Space 24 Mbytes min.
OS Windows 98/Me/NT4.0/2000/XP
Document No. : SIBC A500005 00
Full Support

89
MP2000 SERIES

IRUMA BUSINESS CENTER (SOLUTION CENTER)

480, Kamifujisawa, Iruma, Saitama 358-8555, Japan
Phone 81-4-2962-5151 Fax 81-4-2962-6138
YASKAWA AMERICA, INC.
2121 Norman Drive South, Waukegan, IL 60085, U.S.A.
Phone (800) YASKAWA (800-927-5292) or 1-847-887-7000 Fax 1-847-887-7310
YASKAWA ELETRICO DO BRASIL LTDA.
Avenida Fagundes Filho, 620 Sao Paulo-SP CEP 04304-000, Brazil
Phone 55-11-3585-1100 Fax 55-11-5581-8795
YASKAWA EUROPE GmbH
HauptstraBe 185, Eschborn 65760, Germany
Phone 49-6196-569-300 Fax 49-6196-569-398
YASKAWA ELECTRIC UK LTD.
1 Hunt Hill Orchardton Woods Cumbernauld, G68 9LF, United Kingdom
Phone 44-1236-735000 Fax 44-1236-458182
YASKAWA ELECTRIC KOREA CORPORATION
9F, Kyobo Securities Bldg., 26-4, Yeouido-dong, Yeongdeungpo-gu, Seoul 150-737, Korea
Phone 82-2-784-7844 Fax 82-2-784-8495
YASKAWA ELECTRIC (SINGAPORE) PTE. LTD.
151 Lorong Chuan, #04-01, New Tech Park 556741, Singapore
Phone 65-6282-3003 Fax 65-6289-3003
YASKAWA ELECTRIC (CHINA) CO., LTD.
12F, Carlton Bldg., No.21 HuangHe Road, HuangPu District, Shanghai 200003, China
Phone 86-21-5385-2200 Fax 86-21-5385-3299
YASKAWA ELECTRIC (CHINA) CO., LTD. BEIJING OFFICE
Room 1011, Tower W3 Oriental Plaza, No.1 East Chang An Ave.,
Dong Cheng District, Beijing 100738, China
Phone 86-10-8518-4086 Fax 86-10-8518-4082
YASKAWA ELECTRIC TAIWAN CORPORATION
9F, 16, Nanking E. Rd., Sec. 3, Taipei 104, Taiwan
Phone 886-2-2502-5003 Fax 886-2-2505-1280

YASKAWA ELECTRIC CORPORATION

In the event that the end user of this product is to be the military and said product is to be
employed in any weapons systems or the manufacture thereof, the export will fall under
the relevant regulations as stipulated in the Foreign Exchange and Foreign Trade
Regulations. Therefore, be sure to follow all procedures and submit all relevant
documentation according to any and all rules, regulations and laws that may apply.
Specifications are subject to change without notice LITERATURE NO. KAEP C880700 15I
for ongoing product modifications and improvements. Published in Japan July 2012 04-4 8 -5
© 2004-2012 YASKAWA ELECTRIC CORPORATION. All rights reserved. 12-2-6