CHECKLIST OF EQUPMENTS

TS As per contract Available Calibration Due date of Shortfall/

Sl. No EQUIPMENT DESCRIPTION Remarks
S/No requirement in lab done calibration excess

1 1/d Pan balance with full set of weight capacity 5Kg 4 Set 1 Set Yes 2/4/2010 3 Set

2 1/b 600 gm capacity semi- indicating electronic type , 2Kg/ electronic avail
2 Set 1 Set Yes 2/4/2009 1 Set
accuracy:0.01gms acc:0.01gms

3 1/a 7 to 10 Kg capacitty semi- indicating electronic type 30Kg/ electronic avail

2 Set 1 Set Yes 2/4/2009 1 Set
accuracy:1 gm acc:0.1gms

4 1/c Chemical balance 100 gms capacity Not available in

1 Set _ _ _ 1 Set
accuracy:0.0001gms laboratory

5 2/a Ovens electrically operated themostatically controlled Spot calibration done

including thermometer stainless steel interior 1 Set 1 Set Yes – – during inspection

range ambient to 300ºCsensitivity 1ºC,capacity:120 ltr

6 3 Sieves as per IS 2386/PART1 Spot calibration done

3/a Standard test size 450 mm dia complete with lid and pan Not specified 1 Set Yes – – during inspection

of sieve size 40,25,20,16,12.5,10,4.75,2.36.mm

3/c Standard test size 200 mm dia complete with lid and pan Spot calibration done
1 Set Yes – _
of sieve size 4.75,2.36,1.18,1mm,600,300,250,150,125,90,
75mic. during inspection

7 4 Complete of taking 200 mm and 450 mm dia sieves Spot inspection done

electrically operated with time switch assembly as per IS 1 Nos 1 Nos – – – 1440 RPM

specification

8 5 200 tonnes compressive testing machine electrically cum Calibration report

manually operated fitted with 3 dial gauges 1 Nos 1 Nos Yes 19/12/2008 _ attached

0-2000X10 KN;0-1000X5KN;0-500X2.5KN

7 8/d Circular plates of 200 mm dia 6 Nos 8 Nos Yes – – Spot calib done

8 52 Vicat's needle apparatus for setting time with plunger Spot calibration done
1 Set 1Set Yes _ _
as per IS 269-1968 during inspection

9 6/a Soundness testing apparatus for cement 1 Set 3 Set Yes – 2 Set Spot calib done

10 53/b 150 mm cube mould and 100 mm (each size) as per IS Spot calibration done

150mm cube mould with base plate 36 Nos 36 Nos Yes – during inspection

100mm cube mould with base plate 36 Nos 06 Nos Yes – 30 Nos do

70.6mm cube mould with base plate – 12 Nos Yes – 12 Nos do

50mm cube mould with base plate – 09 Nos Yes – 09 Nos do

11 54 High frequency mortar cube vibrator for cement testing 1 Nos 1 Nos – – – Spot inspection done

12 60 LOS ANGELES apparatus as per IS 2386/PART IV 1 Nos – – – – Not available in lab

13 62 Equipment for slump test (C-143) compacting factor Slump cone avail
4 Set 4 Set Yes – –
apparatus complete Spot inspection done

14 Electrically operated and thermostatically controlled Calibration not

1 Nos 1 Nos No – –
waterbath, sensitivity 1ºC done
15
Steel trowels

Small 2 Nos – – –
Not specified Not Required
Medium 5 Nos – – –

Big 1 Nos – – –

Page 1 of 15
 TS As per contract Available Calibration Due date of Shortfall/
Sl. No EQUIPMENT DESCRIPTION Remarks
S/No requirement in lab done calibration excess

Contractor's Representative Consultant's Representative

16 12 Spatula set of 100mm and 200 mm long

100mm 2 Nos – – – 2 Nos Not Required

200mm 2 Nos 2 Nos – – –

17 40/b Glass type (mercury in glass) themometer in range of

2 Nos 1 Nos – – 1 Nos Not Required
0-110ºC

18 Digital thermometer Not specified 1 Nos Yes – 1 Nos Not Required

19 Stop watch Not specified 1 Nos – – 1 Nos Not Required

20 55 Concrete mixer power driven ,capacity 1cft(tilting) 1 Nos 1 Nos Yes – – Not Required

21 33 Aggregate impact value testing apparatus as per Spot calibration done

1 Nos 1 Nos Yes – –
IS :2386/PART IV-1964 during inspection

22 31 Flakiness and elongation test gauges as per IS 2386 Spot calibration done
2 Nos 1 Nos Yes – –
PART 1 -1963 during inspection

23 34/a Specific gravity determination test apparatus

2 Set 2 Set – – – Not Required
with pycnometer bottle

34/b A wire busket of not more than 6.3 mm mesh 1 Nos 1 Nos – – – Spot inspection done

24 7 Hot plate 200 mm dia-1500 watt 1 Nos 1 Nos Not Required – – Spot inspection done
25 – –
32 Standard measure of 30,15,3 ltr capacity

3ltr-150mm dia/170mm ht/3.15mm thk Calibration done in

2 Sets 2 Sets Yes
Laboratory
15ltr-250mm dia/300 mm ht/4.00mm thk

30 ltr-350mm dia/300mm ht/5.00mm thk

26 6 Glass measuring cylinder-BOROSIL

100ml 1 Nos

250ml Not specified 1 Nos Not Required – Not Required

500ml 1 Nos

1000ml 1 Nos

Glass beaker

200ml Not specified 2 Nos – Not Required

250ml –

Plastic measuring cylinder

100ml 1 Nos –

200ml –
Not specified Not Required Not Required
250ml 1 Nos –

500ml 2 Nos –

1000ml 1 Nos –

27 8 Enamel tray

a)600x450x50mm 1 Nos –
Not specified Not Required Not Required
b)450x300x40mm 1 Nos –

c)300x250x40mm 1 Nos –

28 Aluminium tray

600x600x50mm 1 Nos –
Not specified Not Required Not Required
900x600x50mm 1 Nos –

300x250x40mm 1 Nos –

29 Hydrometer(sp gr)- range 1000 to 1200 Not specified 1 Nos Not Required – Not Required

Page 2 of 15
 TS As per contract Available Calibration Due date of Shortfall/
Sl. No EQUIPMENT DESCRIPTION Remarks
S/No requirement in lab done calibration excess

Contractor's Representative Consultant's Representative

Page 3 of 15
 CALIBRATION OF BULK DANSITY MEASURING CYLINDER

Lab. Calibration No : Date: 16/04/2008

Testing Location : Ch: 1030+700
A. Capacity of Measuring Cylinder : 3 ltr.
A(a) Cylinder Nos : 01

Sl. No Description Unit Trial-01 Trial-02 Trial-03 Remarks

1 Cylinder Weight Kg 2.73 2.73 2.73

2 Cylinder Weight+Water Kg 5.73 5.73 5.73 I.D.=0.150 mtr.

HT.=0.170 mtr.
3 Weight of Water Kg 3 3 3

4 Mean Kg 3

A(b) Cylinder Nos : 02

Sl. No Description Unit Trial-01 Trial-02 Trial-03 Remarks

1 Cylinder Weight Kg 2.7 2.7 2.7

2 Cylinder Weight+Water Kg 5.69 5.69 5.69 I.D.=0.150 mtr.

HT.=0.170 mtr.
3 Weight of Water Kg 2.99 2.99 2.99

4 Mean Kg 2.99

B. Capacity of Measuring Cylinder : 15 ltr.

B(a) Cylinder Nos : 01

Sl. No Description Unit Trial-01 Trial-02 Trial-03 Remarks

1 Cylinder Weight Kg 8.74 8.74 8.74

2 Cylinder Weight+Water Kg 23.39 23.39 23.39 I.D.=0.250 mtr.

HT.=0.300 mtr.
3 Weight of Water Kg 14.65 14.65 14.65

4 Mean Kg 14.65

B(b) Cylinder Nos : 01

Sl. No Description Unit Trial-01 Trial-02 Trial-03 Remarks

1 Cylinder Weight Kg 9.36 9.36 9.36

2 Cylinder Weight+Water Kg 24.06 24.06 24.06 I.D.=0.250 mtr.

HT.=0.300 mtr.
3 Weight of Water Kg 14.7 14.7 14.7
4 Mean Kg 14.7

Contractor's Representative Consultant's Representative

 SPOT CALIBRATION OF CUBE MOULD
(SIZE-150x150x150)
Lab. Calibration No : Date: 16/04/2008
Testing Location : Ch: 1030+700
A . Quantity = 36 nos

Dimension
Sl. No Description Unit Remarks
L B H
1 Cube Mould MM 150 150 150
2 -do- MM 150 150 150
3 -do- MM 150 150 150
4 -do- MM 150 150 150
5 -do- MM 150 150 150
6 -do- MM 150 150 150
7 -do- MM 150 150 150
8 -do- MM 150 150 150
9 -do- MM 150 150 150
10 -do- MM 150 150 150
11 -do- MM 150 150 150
12 -do- MM 150 150 150
13 -do- MM 150 150 150
14 -do- MM 150 150 150
15 -do- MM 150 150 150
16 -do- MM 150 150 150
17 -do- MM 150 150 150
18 -do- MM 150 150 150
19 -do- MM 150 150 150
20 -do- MM 150 150 150
21 -do- MM 150 150 150
22 -do- MM 150 150 150
23 -do- MM 150 150 150
24 -do- MM 150 150 150
25 -do- MM 150 150 150
26 -do- MM 150 150 150
27 -do- MM 150 150 150
28 -do- MM 150 150 150
29 -do- MM 150 150 150
30 -do- MM 150 150 150
31 -do- MM 150 150 150
32 -do- MM 150 150 150
33 -do- MM 150 150 150
34 -do- MM 150 150 150
35 -do- MM 150 150 150
36 -do- MM 150 150 150
 Contractor's Representative Consultant's Representative

SPOT CALIBRATION OF CUBE MOULD

Lab. Calibration No : Date: 16/04/2008

Testing Location : Ch: 1030+700

A. CUBE MOULD SIZE- 100x100x100

Quantity = 6 nos

Dimension
Sl. No Description Unit Remarks
L B H

1 Cube Mould MM 100 100 100

2 -do- MM 100 100 100

3 -do- MM 100 100 100

4 -do- MM 100 100 100

5 -do- MM 100 100 100

6 -do- MM 100 100 100

B CUBE MOULD SIZE- 70.6x70.6x70.6

Quantity = 12 nos

Dimension Remarks
Sl. No Description Unit
L B H

1 Cube Mould MM 70.6 70.6 70.6

2 -do- MM 70.6 70.6 70.6

3 -do- MM 70.6 70.6 70.6

4 -do- MM 70.6 70.6 70.6

5 -do- MM 70.6 70.6 70.6

6 -do- MM 70.6 70.6 70.6

7 -do- MM 70.6 70.6 70.6

8 -do- MM 70.6 70.6 70.6

9 -do- MM 70.6 70.6 70.6

10 -do- MM 70.6 70.6 70.6

11 -do- MM 70.6 70.6 70.6

12 -do- MM 70.6 70.6 70.6

Contractor's Representative Consultant's Representative

 SPOT CALIBRATION OF CUBE MOULD

Lab. Calibration No : Date: 16/04/2008

Testing Location : Ch: 1030+700

A. CUBE MOULD SIZE- 50x50x50

Quantity = 9 nos

Dimension
Sl. No Description Unit Remarks
L B H

1 Cube Mould MM 50 50 50
2 -do- MM 50 50 50
3 -do- MM 50 50 50
4 -do- MM 50 50 50
5 -do- MM 50 50 50
6 -do- MM 50 50 50
7 -do- MM 50 50 50
8 -do- MM 50 50 50
9 -do- MM 50 50 50

Contractor's Representative Consultant's Representative

 SPOT CALIBRATION OF SIEVE

Lab. Calibration No : Date: 16/04/2008

Testing Location : Ch: 1030+700

A SIEVE SIZE- 450 MM DIA COMPLETE WITH LID

Quantity = 1 set

Dimension
Sl. No Description Unit Remarks
L B H

1 Sieve Size 40 mm MM 40 40

2 Sieve Size 25 mm MM 25 25

3 Sieve Size 20 mm MM 20 20

4 Sieve Size 16 mm MM 16 16

5 Sieve Size 12.5 mm MM 12.5 12.5

6 Sieve Size 10 mm MM 10 10

7 Sieve Size 4.75 mm MM 4.75 4.75

8 Sieve Size 2.36 mm MM 2.36 2.36

B SIEVE SIZE- 250 MM DIA COMPLETE WITH LID

Quantity=1 set

Dimension
Sl. No Description Unit Remarks
L B H

1 Sieve Size 4.75 mm MM 4.75 4.75

2 Sieve Size 2.36 mm MM 2.36 2.36

3 Sieve Size 1.18 mm MM 1.18 1.18

4 Sieve Size 1 mm MM 1 1

5 Sieve Size 600 mic. MIC. 600 600

6 Sieve Size 300 mic MIC. 300 300

7 Sieve Size 150 mic MIC. 150 150

 Contractor's Representative Consultant's Representative

SPOT CALIBRATION OF TRAY

(ENAMAL/ALUMINIUM)
Lab. Calibration No : Date: 16/04/2008
Testing Location : Ch: 1030+700
A . Quantity = 2 set

Dimension
Sl. No Description Unit Remarks
L B H
ENAMAL TRAY

1 a) 600x450x50 MM 600 450 50

2 b) 450x300x40 MM 450 300 40

3 c) 300x250x40 MM 300 250 40

ALLUMINIUM TRAY

1 a) 600x600x50 MM 600 600 50

2 b) 900x600x50 MM 900 600 50

3 c) 300x250x40 MM 300 250 40

Contractor's Representative Consultant's Representative

 SPOT INSPECTION REPORT
Lab. Calibration No:
Location: 1030+700
Quantity: 1
DATE: 16-04-08

Name of equipment: ELECTRICALLY OPERATED OVEN

BRAND MODEL SL. NO REMARKS

HOT AIR OVEN AMBRO

CALIBRATION OF ELECTRICALLY OPERATED OVEN

TEMPERATURE OF
TEMPERATURE OF REMARKS:
THERMOMETER
OVEN

50ºC 50ºC

100ºC 100ºC

110ºC 110ºC MACHINE WORKING IN GOOD CONDITION

150ºC 150ºC

200ºC 200ºC

CONTRACTOR'S REPRESENTATIVE CONSULTANT'S REPRESENTATIVE

 SPOT INSPECTION REPORT
Lab. Calibration No:
Location: 1030+700
Quantity: 1
Date: 16-04-08
Name of equipment: VICATS APPRATUS
SL. NO DESCRIPTION OF PARTS DIMENSION OF PARTS REMARKS:

1 MOULD 80 MM DIA 40 MM HEIGHT

2 PLUNGER 10 MM DIA 50 MM HEIGHT DIMENSIONS ARE AS PER IS

3 NEEDLE 1 MM²

CONTRACTOR'S REPRESENTATIVE CONSULTANT'S REPRESENTATIVE

 SPOT INSPECTION REPORT
Lab. Calibration No:
Location: 1030+700
Quantity: 1
Date: 16-04-08

Name of equipment: MORTAR CUBE VIBRATOR FOR CEMENT TESTING

BRAND MODEL SL. NO REMARKS

MACHINE WORKING IN GOOD

PRITEC AC INDUCTION MOTOR S-2007
CONDITION

CONTRACTOR'S REPRESENTATIVE CONSULTANT'S REPRESENTATIVE

 SPOT INSPECTION REPORT
Lab. Calibration No:
Location: 1030+700
Quantity: 1
DATE: 16-04-08
Name of equipment: SLUMP CONE

SL. NO DESCRIPTION OF PARTS DIMENSION OF PARTS (MM) REMARKS

1 TOP DIA 100

DIMENSIONS ARE
2 BOTTOM DIA 200 AS PER IS

3 HEIGHT 300

4 SLUMP ROD 610 16 MM DIA

CONTRACTOR'S REPRESENTATIVE CONSULTANT'S REPRESENTATIVE

 SPOT INSPECTION REPORT
Lab. Calibration No:
Location: 1030+700
Quantity: 1
DATE: 16-04-08
Name of equipment: AGGREGRATE IMPACT VALUE TESTING MACHINE

SL. NO DESCRIPTION OF PARTS A/U DIMENSION OF PARTS REMARKS

1 TOTAL WEIGHT KG 60
DIMENSIONS ARE
2 WEIGHT OF HAMMER KG 14 AS PER IS

3 HEIGHT OF FALL CM 38

CONTRACTOR'S REPRESENTATIVE CONSULTANT'S REPRESENTATIVE

 SPOT INSPECTION REPORT
Lab. Calibration No:
Location: 1030+700
Quantity: 1
Date: 16-04-08

Name of equipment: LE-CHATELIER APPRATUS

SL. NO DESCRIPTION OF PARTS A/U DIMENSION OF PARTS REMARKS

1 HEIGHT OF MOULD MM 30

2 DIA OF MOULD MM 30
DIMENSIONS ARE AS PER IS
3 THICKMESS OF MOULD MM 0.5

CENTRE OF MOULD TO
4 MM 165
END OF POINTOR

CONTRACTOR'S REPRESENTATIVE CONSULTANT'S REPRESENTATIVE