MN67595 Eng PDF

User Manual EtherNet/IP / CAN - Converter
Document code: MN67595_ENG Revision 1.012 Pagina 1 di 27

Industrial Electronic Devices
User Manual
Revision 1.012
English
EtherNet/IP / CAN - Converter

(Order Code: HD67595-A1)
for Website information:

www.adfweb.com?Product=HD67595
for Price information:

www.adfweb.com?Price=HD67595-A1
Benefits and Main Features:

Very easy to configure
Electrical isolation
Other For others EtherNet/IP products see also the following link:
Two EtherNet/IP ports Products
Converter EtherNet/IP to
Temperature range: -40°C/85°C (-40°F/185°F) www.adfweb.com?Product=HD67077 (M-Bus)
www.adfweb.com?Product=HD67597 (DeviceNet Master)
www.adfweb.com?Product=HD67598 (DeviceNet Slave)
www.adfweb.com?Product=HD67599 (J1939)
www.adfweb.com?Product=HD67589 (NMEA2000)
www.adfweb.com?Product=HD67590 (Serial RS232)
www.adfweb.com?Product=HD67590 (Serial RS485)
www.adfweb.com?Product=HD67591 (Modbus Master RS232)
www.adfweb.com?Product=HD67591 (Modbus Master RS485)
www.adfweb.com?Product=HD67592 (Modbus Slave RS232)
www.adfweb.com?Product=HD67592 (Modbus Slave RS485)
Do you have an your customer protocol?
www.adfweb.com?Product=HD67003
Do you need to choose a device? do you want help?
www.adfweb.com?Cmd=helpme
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

INDEX: UPDATED DOCUMENTATION:
Page Dear customer, we thank you for your attention and we remind you that
INDEX 2 you need to check that the following document is:
UPDATED DOCUMENTATION 2 Updated
REVISION LIST 2 Related to the product you own
WARNING 2
TRADEMARKS 2 To obtain the most recently updated document, note the “document code”
SECURITY ALERT 3 that appears at the top right-hand corner of each page of this document.
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5 With this “Document Code” go to web page www.adfweb.com/download/
CHARACTERISTICS 6 and search for the corresponding code on the page. Click on the proper
CONFIGURATION 6 “Document Code” and download the updates.
POWER SUPPLY 7
FUNCTION MODES 8 To obtain the updated documentation for the product that you own, note
LEDS 9 the “Document Code” (Abbreviated written "Doc. Code" on the label on the
ETHERNET/IP 10 product) and download the updated from our web site
USB 10 www.adfweb.com/download/
CAN 11
USE OF COMPOSITOR SW67595 12
NEW PROJECT / OPEN PROJECT 12 REVISION LIST:
SET COMMUNICATION 13
RECEIVE FRAMES 14 Revision Date Author Chapter Description
INFO RECEIVE 15 1.010 29/10/2012 Fl All Software changed (v1.000)
SEND FRAME 16 1.011 17/12/2012 Fl All Revision
INFO SEND 17 1.012 09/01/2013 Nt All Added new chapters
UPDATE DEVICE 18
MECHANICAL DIMENSIONS 20
ORDERING INFORMATIONS 21
ACCESSORIES 21 WARNING:
PLC CONFIGURATION 22
DISCLAIMER 26 ADFweb.com reserves the right to change information in this manual about
OTHER REGULATIONS AND STANDARDS 26 our product without warning.
WARRANTIES AND TECHNICAL SUPPORT 27 ADFweb.com is not responsible for any error this manual may contain.
RETURN POLICY 27
PRODUCTS AND RELATED DOCUMENTS 27
TRADEMARKS:
All trademarks mentioned in this document belong to their respective

owners.

SECURITY ALERT:
GENERAL INFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device are required for
each individual application, legal and safety regulation. The same applies also when using accessories.
INTENDED USE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e. independent limit
switches, mechanical interlocks, etc.).
QUALIFIED PERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and who
have appropriate qualifications for their job.
RESIDUAL RISKS
The device is state of the art and is safe. The instrument can represent a potential hazard if they are inappropriately installed and operated
by personnel untrained. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is danger for people to serious injury or death and / or the
possibility of damage.
CE CONFORMITY
The declaration is made by us. You can send an email to [email protected] or give us a call if you need it.

EXAMPLE OF CONNECTION:

CONNECTION SCHEME:
Figure 1: Connection scheme for HD67595-A1

CHARACTERISTICS:
The HD67595-A1 is a EtherNet/IP / CAN Converter.
It allows the following characteristics:

Up to 500 bytes in reading and 500 bytes in writing;
Triple isolation between CAN - Power Supply, CAN - Ethernet, Power Supply - Ethernet.
Two-directional information between CAN bus and EtherNet/IP bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67595 software on your PC in order to perform the following:
Define the parameter of EtherNet/IP line;
Define the parameter of CAN line;
Define the CAN frames that the Converter can accept;
Define the CAN frames that the Converter sends trough the CAN line;
Define the map of CAN byte that must be written in the EtherNet/IP array;
Define the map of which EtherNet/IP bytes must be written in CAN frames;
Update the device.

POWER SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]

HD67595-A1 3.5
Caution: Not reverse the polarity power
HD67595-A1

FUNCTION MODES:
The device has got two functions mode depending of the position of the ‘Dip2 of Dip-Switch B’:
The first, with ‘Dip2 of Dip-Switch B’ at “OFF” position, is used for the normal working of the device.
The second, with ‘Dip2 of Dip-Switch B’ at “ON” position, is used for upload the Project and/or Firmware.
For the operations to follow for the updating, see ‘UPDATE DEVICE’ section.
According to the functioning mode, the LEDs will have specifics functions, see ‘LEDS’ section.
Warning:
Dip1 of ‘Dip-Switch B’ must be at ON position for working even if the Ethernet cable isn’t inserted.

LEDS:
The device has got four LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
Blinks quickly: Boot state

1: Device State (green) Blinks slowly (~1Hz)
Blinks very slowly (~0.5Hz): update in progress
Change state when receive a CAN Blinks quickly: Boot state

2: CAN comm. (green)
frame defined in the Compositor Blinks very slowly (~0.5Hz): update in progress
Blinks quickly for a short time ON: Ethernet cable connected

3: Ethernet1 Tx (green)
when sends Ethernet frames OFF: Ethernet cable disconnected
Blinks quickly for a short time ON: Ethernet cable connected

4: Ethernet2 Tx (green)
when sends Ethernet frames OFF: Ethernet cable disconnected

ETHERNET/IP:
The EtherNet/IP connection must be made using Connector3 and/or Connector4 of HD67595-A1 with at least a Category 5E cable. The
maximum length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to
100 Mbps. To connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is
recommended the use of a cross cable.
USB:
The USB connection, must be made with a USB cable with a USB Mini B plug.
Note:
The USB port is not used in this moment.

CAN:
For terminate the CAN line with a 120Ω resistor it is necessary that the Dip1 of ‘Dip-Switch A’ is at ON position.
Cable characteristics:
DC parameter: Impedance 70 Ohm/m

AC parameters: Impedance 120 Ohm/m
Delay 5 ns/m
Length Baud Rate [bps] Length MAX [m]
10 K 5000
20 K 2500
50 K 1000
100 K 650
125 K 500
250 K 250
500 K 100
800 K 50
1000 K 25

USE OF COMPOSITOR SW67595:
To configure the Converter, use the available software that runs with
Windows, called SW67595. It is downloadable on the site
www.adfweb.com and its operation is described in this document.
(This manual is referenced to the last version of the software present
on our web site). The software works with MSWindows (MS 2000, XP,
Vista, Seven, 8; 32/64bit).
When launching the SW67595 the right window appears (Fig. 2).
Figure 2: Main window for SW67595
NEW PROJECT / OPEN PROJECT:
The “New Project” button creates the folder which contains the entire device configuration.
A device configuration can also be imported or exported:

To clone the configurations of a programmable “EtherNet/IP / CAN – Converter” in order to
configure another device in the same manner, it is necessary to maintain the folder and all
its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the button
“Open Project”.

SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, EtherNet/IP and CAN.
By Pressing the “Set Communication” button from the main window for SW67595 (Fig. 2) the window
“Set Communication” appears (Fig. 3).
The window is divided in two sections, one for the EtherNet/IP and the other for the CAN.
The means of the fields for “EtherNet/IP” are:

In the fields “IP” insert the IP address that you want to give to the Converter;
In the fields “SUBNET Mask” insert the SubNet Mask;
In the fields “GATEWAY” insert the default gateway that you want to use. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the net;
In the field “Port” the port used for EtherNet/IP communication is defined. The port has a fixed
value of 44818;
In the field "Number Byte Input" the number of byte from the EtherNet/IP to the Converter is
defined (at maximum it is possible to use 500 byte);
In the field "Number Byte Output" the number of byte from the Converter to the EtherNet/IP is
defined (at maximum it is possible to use 500 byte).
The means of the fields for the “CAN” section are:

Figure 3: “Set Communication” window
In the “Baud rate” field the CAN baudrate is defined.

RECEIVE FRAMES:
By pressing the “Receive Frames” button from the main window for SW67595 (Fig. 2) the “Receive Frames” window appears (Fig. 4).
The COB inserted in this table contains the Output data of EtherNet/IP. These frames are accepted by the gateway.
The data of the columns have the following meanings:

In the field “Cob-ID” insert the COB of the CAN frame;
In the field “Type” is possible to select which type of CAN packet use for this Cob-ID; or 2.0A (11 bits) or 2.0B (29 bits);
In the field “Dimension” insert the number of byte of the COB (from 1 to 8);
The field “TimeOut” is used for put at zero the data into EtherNet/IP if the CAN frame don’t arrives with a frequency less than the
time expressed in the field. If the value in the field is 0, means that you don’t want to use this feature, and so the value is never
deleted;
In the field “Mnemonic” it is possible to insert a brief description.
Figure 4: “Receive Frames” window

INFO RECEIVE:
By pressing the “Info Receive” button from the main window for SW67595 (Fig. 2) the “Receive Frames Info” window appears (Fig. 5).
In the “COB ID” field there are the COB ID that you have inserts in the “Receive Frames” window;
In the “Bytes” field select the correspondence of the byte in EtherNet/IP.
For Example:
Byte 1 of frame CAN go to byte 0 in EtherNet/IP: the first byte of CAN frame is 0x11 in the byte 0 of EtherNet/IP I can read 0x11.
Figure 5: “Receive Frames Info” window

SEND FRAMES:
By pressing the “Send Frames” button from the main window for SW67595 (Fig. 2) the “Send frames” window appears (Fig. 6).
The COB inserted in this table contains the Input data of EtherNet/IP. These frames are sent by the gateway.
The data of the columns have the following meanings:

In the field “Cob-ID” insert the COB of the CAN frame;
In the field “Type” is possible to select which type of CAN packet use for this Cob-ID; or 2.0A (11 bits) or 2.0B (29 bits);
In the field “Dimension” insert the number of byte of the COB (from 1 to 8);
In the field “Send Frame Type” is possible to select when send the CAN frame. There are two options: the first is “On Data
Change”, the frame is sent when the data changes; the second is “On Times” and the frame is send cyclically;
In the field “Timer Send” insert the interval used for the “Send Frame Type On Times”. The time is in milliseconds;
In the field “Mnemonic” it is possible to insert a brief description.
Figure 6: “Send Frames” window

INFO SEND:
By pressing the “Info Send” button from the main window for SW67595 (Fig. 2) the “Send Frames Info” window appears (Fig. 7).
In the “COB ID” field there are the COB ID that you have inserts in the “Send frames” window;
In the field “Bytes” select the correspondence of the byte in EtherNet/IP.
For Example:
Byte 1 of frame CAN is byte 0 in EtherNet/IP:
the byte 0 of EtherNet/IP is 0x22, the first byte of CAN frame with COB=0x350 will be 0x22.
Figure 7: “Send Frames Info” window

UPDATE DEVICE:
By pressing the “Update Device” button it is possible to load the created Configuration into the
device; and also the Firmware, if is necessary.
If you don’t know the actual IP address of the device you have to use this procedure:
Turn off the Device;
Put Dip2 of ‘Dip-Switch B’ at ON position;
Turn on the device
Connect the Ethernet cable;
Insert the IP “192.168.2.205”;
Press the “Ping” button, must appear “Device Found!”;
Press the “Next” button;
Select which operations you want to do;
Press the “Execute update firmware” button to start the upload;
When all the operations are “OK” turn off the Device;
Put Dip2 of ‘Dip-Switch B’ at OFF position;
Turn on the device.
At this point the configuration/firmware on the device is correctly updated.
Figure 8: “Update device” windows

If you know the actual IP address of the device you have to use this procedure:
Turn on the Device with the Ethernet cable inserted;
Insert the actual IP of the Converter;
Press the “Ping” button, must appear “Device Found!”;
Press the “Next” button;
Select which operations you want to do;
Press the “Execute update firmware” button to start the upload;
When all the operations are “OK” the device automatically goes at
Normal Mode.
At this point the configuration/firmware on the device is correctly update.
Note:
When you install a new version of the software it is better if the first time you do the update of the Firmware in the HD67595-A1
device.
Note:
When you receive the device, for the first time, you have to update also the Firmware in the HD67595-A1 device.
Warning:
If the Fig. 9 appears when you try to do the Update before require assistance try
these points:
Try to repeat the operations for the updating;
Try with another PC;
Try to restart the PC;
If you are using the program inside a Virtual Machine, try to use in the main
Operating System;
If you are using Windows Seven or Vista or 8, make sure that you have the
administrator privileges;
Figure 9: “Protection” window
Take attention at Firewall lock;
Check the LAN settings.
In the case of HD67595-A1 you have to use the software “SW67595”: www.adfweb.com\download\filefold\SW67595.zip.

MECHANICAL DIMENSIONS:
Figure 12: Mechanical dimensions scheme for HD67595-A1

ORDERING INFORMATIONS:
The ordering part number is formed by a valid combination of the following:

HD67595 – A 1
Connectors Type
1: Removable 5mm Screw Terminal
Enclosure Type
A: 1M, 35mm DIN Rail mounting
Device Family
HD67595: EtherNet/IP / CAN - Converter
Order Code: HD670595-A1 - EtherNet/IP / CAN - Converter
ACCESSORIES:
Order Code: AC34001 - 35mm Rail DIN - Power Supply 220/240V AC 50/60Hz – 12 V AC
Order Code: AC34002 - 35mm Rail DIN - Power Supply 110V AC 50/60Hz – 12 V AC

PLC CONFIGURATION:
The configuration and commissioning of the EtherNet/IP Converter as described on the following pages was accomplished with the help of
the RSLogix 5000-software of Rockwell Automation. In case of using a control system from another supplier please attend to the associated
documentation.
These are the steps to follow:
1) Create a "Generic Ethernet Module" under

the Ethernet section in the I/O Configuration tree.

2) Edit the settings of the new Generic Ethernet Module. As shown in the screen shot
below, the module was named “HD67595” and the IP-address assigned is
192.168.1.141.
For the Comm Format “Data – SINT” shall be selected as the data type.
The HD67595-A1 can uses up to 500 bytes for input assembly instance 101 and 500
bytes for output assembly instance 100.
RSLogix 5000 requires a configuration assembly instance. Both modules do not provide a
configuration assembly instance. Therefore it is allowed to select an instance of 3 and to
set the value to zero.
3) The setting of 10msec for the “Requested Packet Interval (RPI)” is adequate but it
is possible to change this value as required. A lower value of 2ms shall not be selected.
Warning:
The field “Use Unicast Connection over EtherNet/IP” must be checked.

4) After the
configuration is
completed, the controller
tags are created.

5) With “RSLinks Classic Lite”, after have done a

network scan (RSWho), and finding the EtherNet/IP
device, it is possible to load the EDS file for the
device in order to have the “Module Info” compiled.
Before
After

DISCLAIMER
All technical content within this document can be modified without notice. The content of the document content is a recurring audit.
For losses due to fire, earthquake, third party access or other accidents, or intentional or accidental abuse, misuse, or use under abnormal
conditions repairs are charged to the user. ADFweb.com S.r.l. will not be liable for accidental loss of use or inability to use this product, such
as loss of business income. ADFweb.com S.r.l. shall not be liable for consequences of improper use.
OTHER REGULATIONS AND STANDARDS
WEEE INFORMATION
Disposal of old electrical and electronic equipment (as in the European Union and other European countries with separate
collection systems).
This symbol on the product or on its packaging indicates that this product may not be treated as household rubbish. Instead, it
should be taken to an applicable collection point for the recycling of electrical and electronic equipment. If the product is disposed
correctly, you will help prevent potential negative environmental factors and human health, which could otherwise be caused by
inappropriate disposal. The recycling of materials will help to conserve natural resources. For more information about recycling this
product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
RESTRICTION OF HAZARDOUS SUBSTANCES DIRECTIVE

The device respects the 2002/95/EC Directive on the restriction of the use of certain hazardous substances in electrical
and electronic equipment (commonly referred to as Restriction of Hazardous Substances Directive or RoHS).
CE MARKING
The product conforms with the essential requirements of the applicable EC directives.

WARRANTIES AND TECHNICAL SUPPORT:
For fast and easy technical support for your ADFweb.com SRL products, consult our internet support at www.adfweb.com.
Otherwise contact us at the address [email protected]
RETURN POLICY:
If while using your product you have any problem and you wish to exchange or repair it, please do the following:
1) Obtain a Product Return Number (PRN) from our internet support at www.adfweb.com. Together with the request, you need to
provide detailed information about the problem.
2) Send the product to the address provided with the PRN, having prepaid the shipping costs (shipment costs billed to us will not be
accepted).
If the product is within the warranty of twelve months, it will be repaired or exchanged and returned within three weeks. If the product is no
longer under warranty, you will receive a repair estimate.
PRODUCTS AND RELATED DOCUMENTS:
Part Description URL

HD67120 Converter Ethernet to RS232/RS485 www.adfweb.com?product=HD67120
HD67119 Converter USB 2.0 to RS485 Isolated www.adfweb.com?product=HD67119
HD67507 Gateway Modbus TCP Server to RTU Master www.adfweb.com?product=HD67507
HD67510 Gateway Modbus TCP Client to RTU Slave www.adfweb.com?product=HD67510

MN67595 Eng PDF

Uploaded by

Copyright:

Available Formats

MN67595 Eng PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MN67595 Eng PDF

Uploaded by

Copyright:

Available Formats

User Manual EtherNet/IP / CAN - Converter

Document code: MN67595_ENG Revision 1.012 Pagina 1 di 27

EtherNet/IP / CAN - Converter

for Website information:

for Price information:

Benefits and Main Features:

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

INDEX: UPDATED DOCUMENTATION:

All trademarks mentioned in this document belong to their respective

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

Figure 1: Connection scheme for HD67595-A1

The HD67595-A1 is a EtherNet/IP / CAN Converter.

It allows the following characteristics:

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

Consumption at 24V DC:

Device Consumption [W/VA]

Caution: Not reverse the polarity power

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

LED Normal Mode Boot Mode

Blinks quickly: Boot state

Change state when receive a CAN Blinks quickly: Boot state

Blinks quickly for a short time ON: Ethernet cable connected

Blinks quickly for a short time ON: Ethernet cable connected

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

DC parameter: Impedance 70 Ohm/m

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

USE OF COMPOSITOR SW67595:

Figure 2: Main window for SW67595

NEW PROJECT / OPEN PROJECT:

A device configuration can also be imported or exported:

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

The means of the fields for “EtherNet/IP” are:

The means of the fields for the “CAN” section are:

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

The data of the columns have the following meanings:

Figure 4: “Receive Frames” window

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

Figure 5: “Receive Frames Info” window

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

The data of the columns have the following meanings:

Figure 6: “Send Frames” window

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

Figure 7: “Send Frames Info” window

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

At this point the configuration/firmware on the device is correctly updated.

Figure 8: “Update device” windows

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

At this point the configuration/firmware on the device is correctly update.

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

Figure 12: Mechanical dimensions scheme for HD67595-A1

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

The ordering part number is formed by a valid combination of the following:

Order Code: HD670595-A1 - EtherNet/IP / CAN - Converter

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

1) Create a "Generic Ethernet Module" under