RENAULT Transponder Key Calculator V1.
In the year 1997 RENAULT has introduced several transponder key
immobilizer systems that uses PHILIPS Read/Write transponder PCF7931.
During ignition-on phase transponder is being read and result is compared with
data inside immobilizer module. In the case when both key data and immobilizer
EEPROM memory data matches each other, car is allowed to start. When
original transponder key is lost you can use this calculator to make replacement
for it. In addition to this calculator, transponder read/write tool is necessary to
complete key making operation. Immobilizer EEPROM data is used as a source
for calculator software and result is 16 bytes of transponder data that you must
to write into it. Pictures below will help you to define what kind of immobilizer
module you are dealing with and locate memory device as well.
SIEMENS Immobilizer
Cars used in: MEGANE ‘96-’98 without IR central locking, ESPACE ‘96-’98,
TWINGO ‘96-’98 without IR central locking, CLIO ‘95-’96 without IR central
locking;
Memory device: Motorola MCU MC68HC05B16; Use proper programmer to read
internal EEPROM memory – for example XProg from www.tmt.lt or 68HC05B16
programming tool from www.etlweb.com ;
Address range: 0100h-01FFh;
File size: 256 bytes;
Location: MEGANE – passenger side, under dashboard near to passenger Air
Bag. Needs dashboard to be removed; ESPACE – remove instrument cluster,
reach black box with single black connector on the left through the opening for
instrument cluster; TWINGO – under dashboard on driver’s side, located in hard-
to-reach place.
SAGEM TRANS-PLAF and TRF-TRANS-CAR Immobilizers
Cars used in: KANGOO ->’02, MASTER ->’02, TWINGO ‘99->, TRAFFIC.
Memory device: serial EEPROM 93C46; Use any serial EEPROM programmer to
read it;
Address range: 0000h-007Fh;
File size: 128 bytes;
Location: KANGOO – remove instrument cluster, locate black box with blue
connector down on the left; MASTER – driver side, under steering wheel;
TWINGO – under dashboard on driver’s side, located in hard-to-reach place.
ESPACE BII
Cars used in: ESPACE ‘98-’02
Memory device: Motorola MCU MC68HC(9)08AZ60; Use proper programmer to
read internal EEPROM memory – for example XProg from www.tmt.lt or
68HC908AZ60 programming tool from www.etlweb.com ;
Address range: 0800h-09FFh, 0600h-09FFh, 0000h-FFFFh;
File size: 512, 1024 or 65536 bytes;
Location: Under passenger feet – open up fuse box cover.
VALEO Immobilizer
Cars used in: LAGUNA ‘98-’00, SAFRANE ‘98-’00 ;
Memory device: serial EEPROM 93C46; Use any serial EEPROM programmer to
read it;
Address range: 0000h-007Fh;
File size: 128 bytes;
Location: LAGUNA – driver side, attached to the left side of fascia fuse box;
SAFRANE – passenger side, behind glove box.
Clio SAGEM BMT Immobilizer
Cars used in: Clio II ‘98-’01 ;
Memory device: serial EEPROM 93C46; Use any serial EEPROM programmer to
read it;
Address range: 0000h-007Fh;
File size: 128 bytes;
Location: driver side, inserted into the fascia relay box; Remove several black
mini relays and take out white relay box insert - BMT module.
LAGUNA II UCH
(12 character code calculation)
Memory device: Motorola MCU MC68HC912DG128 (3K91D); Use proper
programmer to read internal EEPROM memory – for example XProg from
www.tmt.lt or 68HC912 programming tool from www.etlweb.com ;
Address range: 0800h-0FFFh;
File size: 2048 bytes;
Location: driver side. Attached to fascia fuse box .
MEGANE II / SCENIC II UCH
(12 character code calculation)
Memory device: Motorola MCU MC9S12DG256 (1K79X); Use proper programmer
to read internal EEPROM memory – for example XProg from www.tmt.lt or
68HC912 programming tool from www.etlweb.com ;
Address range: 4000h-4FFFh;
File size: 4096 bytes;
Location: driver side. At left under steering wheel.
