0% found this document useful (0 votes)

307 views114 pages

Motorola WT4090 User Guide

Ghid de utilizare terminal Motorola WT4090

Uploaded by

nea_vio20055419

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

307 views114 pages

Motorola WT4090 User Guide

Ghid de utilizare terminal Motorola WT4090

Uploaded by

nea_vio20055419

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 114

WT4070/90 Wearable Terminal

User Guide
WT4070/90 Wearable Terminal

User Guide

72E-87633-05
Rev. A
December 2009
ii WT4070/90 Wearable Terminal User Guide

© 2006-9 Motorola, Inc. All rights reserved.

No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,
without permission in writing from Motorola. This includes electronic or mechanical means, such as
photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to
change without notice.

The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on
a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each
software or firmware program delivered hereunder (licensed program). Except as noted below, such license
may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of
Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under
copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with
other program material, create a derivative work from a licensed program, or use a licensed program in a
network without written permission from Motorola. The user agrees to maintain Motorola’s copyright notice on
the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in
whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed
program delivered to the user or any portion thereof.

Motorola reserves the right to make changes to any software or product to improve reliability, function, or
design.

Motorola does not assume any product liability arising out of, or in connection with, the application or use of
any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc.,
intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in
Motorola products.

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Symbol is a
registered trademark of Symbol Technologies, Inc. Bluetooth is a registered trademark of Bluetooth SIG.
Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation.
All other product or service names are the property of their respective owners.

Motorola, Inc.
One Symbol Plaza
Holtsville, New York 11742-1300
http://www.motorola.com/enterprisemobility

Patents
This product is covered by one or more of the patents listed on the website: www.motorola.com/
enterprisemobility/patents.
iii

Revision History
Changes to the original manual are listed below:

Change Date Description

-01 Rev. A 09/25/2006 Initial Release

-02 Rev. A 02/22/2007 Add new start up windows, Fusion 2.5 information, 128 MB Flash configuration.

-03 Rev. A 05/06/2008 Add OEM version 05.30.000 information. Add freezer pouch information.

-04 Rev. 10/09/2008 Add touch screen configuration.

-05 Rev. 12/15/09 Add Voice Only WT4090 configuration support.

iv WT4070/90 Wearable Terminal User Guide
Table of Contents

Patents.................................................................................................................................................. ii
Revision History .................................................................................................................................... iii

About This Guide

Chapter 1: Getting Started

Chapter 2: Using the Wearable Terminal

Introduction .......................................................................................................................................... 2-1
Power Button ....................................................................................................................................... 2-1
LED Indicators ..................................................................................................................................... 2-2
Keypads ............................................................................................................................................... 2-4
Two-color Alphanumeric Keypad ................................................................................................... 2-4
Triple-Tap Alphanumeric Keypad .................................................................................................. 2-6
Voice Only Keypad ........................................................................................................................ 2-9
Display ................................................................................................................................................. 2-10
Start Up Window ............................................................................................................................ 2-10
Windows CE 5.0 Desktop .............................................................................................................. 2-11
Status Icons ............................................................................................................................. 2-11
Using the Keypad to Navigate Applications ................................................................................... 2-12
Key Combinations .................................................................................................................... 2-13
Selecting Items ........................................................................................................................ 2-13
Navigating Menus .................................................................................................................... 2-14
Navigating Tabs ....................................................................................................................... 2-14
Navigating Fields ..................................................................................................................... 2-14
Selecting Checkboxes and Radio Buttons ............................................................................... 2-14
Selecting Items in a List ........................................................................................................... 2-15
Screen Calibration ......................................................................................................................... 2-15
Special Character Keypad ................................................................................................................... 2-16
Resetting the Wearable Terminal ........................................................................................................ 2-17
Performing a Warm Boot ......................................................................................................... 2-17
Performing a Cold Boot ............................................................................................................ 2-18
Data Capture ....................................................................................................................................... 2-19
Laser Scanning .............................................................................................................................. 2-19
Scanning Considerations ............................................................................................................... 2-19
Scanning Bar Codes ...................................................................................................................... 2-19
Scanning Tips .......................................................................................................................... 2-20
Scan LED Indicator ........................................................................................................................ 2-20
Imaging ................................................................................................................................................ 2-20
Operational Modes ......................................................................................................................... 2-20
Imager Scanning ............................................................................................................................ 2-21
Waking the Wearable Terminal ........................................................................................................... 2-22

Chapter 3: Accessories
Introduction .......................................................................................................................................... 3-1
Cradles ........................................................................................................................................... 3-1
Scanners ........................................................................................................................................ 3-1
Accessories .................................................................................................................................... 3-1
Single Slot USB Cradle ........................................................................................................................ 3-2
Battery Charging Indicators ........................................................................................................... 3-3
Four Slot Ethernet Cradle .................................................................................................................... 3-4
Battery Charging ............................................................................................................................ 3-5
LED Charge Indications ................................................................................................................. 3-5
Speed LED ..................................................................................................................................... 3-5
Link LED ........................................................................................................................................ 3-5
Battery Charging Indicators ........................................................................................................... 3-5
Table of Contents vii

Four Slot Spare Battery Charger ......................................................................................................... 3-6

Spare Battery Charging with the Four Slot Spare Battery Charger ............................................... 3-6
Battery Charging Indicators ........................................................................................................... 3-6
RS409 Scanner ................................................................................................................................... 3-8
RS309 Scanner ................................................................................................................................... 3-10
RS507 Imager ...................................................................................................................................... 3-12
Freezer Pouch ..................................................................................................................................... 3-12
Wired Headset ..................................................................................................................................... 3-14
Connector Shroud ................................................................................................................................ 3-16
Assembly ....................................................................................................................................... 3-16
Disconnecting the Cable from the Wearable Terminal .................................................................. 3-16

Chapter 4: Maintenance & Troubleshooting

Appendix A: Specifications
Technical Specifications ...................................................................................................................... A-1
Wearable Terminal ......................................................................................................................... A-1
RS309 Scanner .............................................................................................................................. A-3
RS409 Scanner .............................................................................................................................. A-4
RS507 Scanner .............................................................................................................................. A-6
Accessories .................................................................................................................................... A-8

Appendix B: Regulatory Information

Introduction .......................................................................................................................................... B-1
viii WT4070/90 Wearable Terminal User Guide

Accessory Power Supply Regulatory Compliance ............................................................................... B-1

Glossary

Index
About This Guide

Introduction
This guide provides information about using the WT4070/90 family of mobile terminals and accessories. The
WT4090 has two versions, one with a display and a voice only version without a display. Throughout this guide
Voice Only WT4090 refers to the version without the display and WT4070/90 refers to the version with a display.

NOTE Screens and windows pictured in this guide are samples and can differ from actual screens.

Documentation Set
The documentation set for the WT4070/90 is divided into guides that provide information for specific user needs.

• Microsoft Application Guide - describes how to use Microsoft developed applications.

• Enterprise Mobility Application Guide - describes how to use Motorola Enterprise Mobility developed
applications.
• WT4070/90 Wearable Terminal User Guide - describes how to use the WT4070/90 wearable terminal.
• WT4070/90 Wearable Terminal Integrator Guide - describes how to set up the WT4070/90 wearable
terminal and the accessories.
• EMDK Help File - provides API information for writing applications.
x WT4090 Wearable Terminal User Guide

Configurations
This guide covers the following configurations:

Data Operating
Configuration Radios Display Memory Capture System Keypads

WT4070 WLAN: 802.11b/g 2.8” QVGA 128 MB RAM/ Optional Windows Two-color or
WPAN: Bluetooth Color 64 MB Flash accessory CE 5.0 Triple-tap
non-touch Professional Alphanumeric
Keypad

WT4090 WLAN: 802.11a/b/g 2.8” QVGA 128 MB RAM/ Optional Windows Two-color or
WPAN: Bluetooth Color; 64 MB Flash or accessory CE 5.0 Triple-tap
non-touch 128 MB RAM/ Professional Alphanumeric
128 MB Flash Keypad

2.8” QVGA 128 MB RAM/ Optional Windows Two-color

Color; 128 MB Flash accessory CE 5.0 Alphanumeric
touch Professional Keypad

Voice Only WLAN: 802.11a/b/g None 128 MB RAM/ Optional Windows Three
WT4090 WPAN: Bluetooth 128 MB Flash accessory CE 5.0 programmable
Professional keys

Software Versions
NOTE To view the software versions on the Voice Only WT4090, the Voice Only WT4090 must be
connected to a host computer running remote desktop software. Refer to the WT4070/90
Wearable Terminal Integrator Guide for more information.

This guide covers various software configurations and references are made to operating system or software
versions for:

• OEM version
• Fusion version.

OEM Software
To determine the OEM software version:

1. Press CTRL and then ESC to open the Start menu.

2. Using the navigation keys, select Settings.

3. Press the Blue key and the down arrow to open the Control Panel sub-menu.

4. Press ENTER key to launch Control Panel.

5. Using the navigation keys, select the System Information icon.

6. Press ENTER key to launch System Information applet.

About This Guide xi

Fusion Software
To determine the Fusion software version:

1. Press ALT - w. The Wireless menu appears.

2. Using the navigation keys, select Wireless Status.

3. Press ENTER. The Wireless Status window displays.

4. Press 5. The Versions screen appears.

Chapter Descriptions
Topics covered in this guide are as follows:

• Chapter 1, Getting Started, provides information on getting the wearable terminal up and running for the first
time.
• Chapter 2, Using the Wearable Terminal, explains how to use the wearable terminal. This includes
instructions for powering on and resetting the wearable terminal, entering and capturing data.
• Chapter 3, Accessories, describes the accessories available for the wearable terminal and how to use the
accessories with the wearable terminal.
• Chapter 4, Maintenance & Troubleshooting, includes instructions on cleaning and storing the wearable
terminal, and provides troubleshooting solutions for potential problems during wearable terminal operation.
• Appendix A, Specifications, includes a table listing the technical specifications for the wearable terminal.
• Appendix B, Regulatory Information, contains the accessory power supply regulatory compliance
statements.
xii WT4090 Wearable Terminal User Guide

Notational Conventions
The following conventions are used in this document:

• “Wearable terminal” refers to the WT4070/90 series of wearable terminals.

• Italics are used to highlight the following:
• Chapters and sections in this guide
• Related documents
• Bold text is used to highlight the following:
• Dialog box, window and screen names
• Drop-down list and list box names
• Check box and radio button names
• Icons on a screen
• Key names on a keypad
• Button names on a screen.
• Bullets (•) indicate:
• Action items
• Lists of alternatives
• Lists of required steps that are not necessarily sequential.
• Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.

• WT4090 Quick Start Guide, p/n 72-86717-xx

• Voice Only WT4090 Quick Start Guide, p/n 72-130435-xx
• WT4090 Windows® CE 5.0 Regulatory Guide, p/n 72-86718-xx
• WT4090 Wearable Terminal Integrator Guide, p/n 72E-87638-xx
• RS309 Scanner Quick Reference Guide, p/n 72-86011-xx
• RS409 Scanner Quick Reference Guide, p/n 72-86010-xx
• RS507 Hands-free Imager Quick Reference Guide, p/n 72-115987-xx
• RS507 Hands-free Imager Product Reference Guide, p/n 72E-120802-xx
• Wireless Fusion Enterprise Mobility Suite User Guide for Version 2.XX, p/n 72E-107170-xx
• Enterprise Mobility Application Guide for Motorola Devices, p/n 72E-68901-xx
• Microsoft Applications for Windows Mobile and CE 5.0 User Guide, p/n 72E-78456-xx
• Enterprise Mobility Developer Kits, available at: http://www.motorola.com/enterprisemobility/support.
• Device Configuration Package (DCP for WT4090c50) and Platform SDK (PSDK9090c50) for WT4090 with
Windows CE 5.0, available at: http://www.motorola.com/enterprisemobility/support.
About This Guide xiii

• ActiveSync software, available at: http://www.microsoft.com.

For the latest version of this guide and all guides, go to: http://www.motorola.com/enterprisemobility/manuals.

Service Information
If you have a problem with your equipment, contact Motorola Enterprise Mobility support for your region. Contact
information is available at: http://www.motorola.com/enterprisemobility/contactsupport.

When contacting Enterprise Mobility support, please have the following information available:

• Serial number of the unit

• Model number or product name
• Software type and version number
Motorola responds to calls by email, telephone or fax within the time limits set forth in support agreements.

If your problem cannot be solved by Motorola Enterprise Mobility Support, you may need to return your equipment
for servicing and will be given specific directions. Motorola is not responsible for any damages incurred during
shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the
warranty.

If you purchased your Enterprise Mobility business product from a Motorola business partner, contact that business
partner for support.
xiv WT4090 Wearable Terminal User Guide
Chapter 1 Getting Started

Introduction
This chapter lists the parts and accessories for the wearable terminal and explains how to install and charge the
batteries and start the wearable terminal for the first time.

Display Power Button

Charge Status LED

Application
Keypad Data Entry Keypad

Action Keypad Speaker

Figure 1-1 WT4070/90 Wearable Terminal Front View

1-2 WT4070/90 Wearable Terminal User Guide

Application
Controlled LED Battery Status LED WLAN Status LED

Power Button

Charge Status LED

Action Keypad Speaker

Figure 1-2 Voice Only WT4090 Wearable Terminal Front View

Interface Connector
Rubber Plug

Battery

Battery Release

Cleat

Cradle Connector Interface Connector

(shown without Rubber Plug)

Figure 1-3 Wearable Terminal Back View

Table 1-1 Parts of the Wearable Terminal

Item Description

Display Displays the application and data stored on the device. (WT4090 only)

Power Button Places the wearable terminal in to the suspend mode or resumes normal operation.
Performs a warm boot when held down for five seconds. See Resetting the Wearable
Terminal on page 2-17 for information about performing a warm boot.

Charge Status LED Indicates the charging status of the battery.

Getting Started 1-3

Table 1-1 Parts of the Wearable Terminal (Continued)

Item Description

WLAN Status LED Indicates the status of the wireless connection. (Voice Only WT4090 only)

Battery Status LED Indicates when the battery charge level falls below 30%. (Voice Only WT4090 only)

Application Controlled LED Application programmable. (Voice Only WT4090 only)

Speaker Provides audio playback.

Keypads Enable user input.

Battery Provides power to the wearable terminal.

Interface Connector Provides electrical connection to an accessory, such as a scanner.

Cradle Connector Provides electrical connection to a cradle.

Battery Release Releases the battery for removal.

Cleat Provides mounting for the wrist mount and cradles.

Unpacking the Wearable Terminal

Carefully remove all protective material from around the wearable terminal and save the shipping container for later
storage and shipping.

Verify that you received all equipment listed below:

• Wearable terminal
• Lithium-ion battery
• Regulatory Guide
• Quick Start Guide.
Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment,
contact the Motorola Enterprise Mobility Support Center immediately. See page xiii for contact information.

Accessories
Table 1-2 lists the major accessories available for the wearable terminal:
Table 1-2 Wearable Terminal Accessories

Accessory Description
Single Slot USB Cradle Charges the wearable terminal main battery and a spare battery. It also synchronizes
the wearable terminal with a host computer through a USB connection.

Four Slot Ethernet Cradle Charges up to four wearable terminals (with main battery installed) and provides
communication through an Ethernet connection.

Four Slot Spare Battery Charges up to four spare batteries.

Charger
1-4 WT4070/90 Wearable Terminal User Guide

Table 1-2 Wearable Terminal Accessories (Continued)

Accessory Description

RS409 Scanner Provides scanning capability.

RS309 Scanner Provides scanning capability.

RS507 Scanner Provides wired or wireless imaging capability.

Wrist Mount Provides a means for wearing the wearable terminal on the arm for hands-free
applications.

Hip Mount Provides a means for wearing the wearable terminal on a belt for hands-free
applications.

Headset For audio playback/recording during voice-enabled applications.

Headset Adapters Connect an optional headset to the wearable terminal.

Replacement Batteries Standard Capacity Battery: 2330 mAh (minimum)

Extended Capacity Battery: 4600 mAh (minimum)

Standard Capacity Battery Allows the user to use the wearable terminal with standard capacity battery in a
Freezer Pouch freezer environment on the hip or wrist for use in voice picking applications.

Extended Capacity Battery Allows the user to use the wearable terminal with extended capacity battery in a
Freezer Pouch freezer environment on the hip or wrist for use in voice picking applications.

USB Adapter Connects the Single-slot cradle to USB hubs, mice, keyboards and memory. The
adapter has a USB mini-A connector on the cradle side and a USB A Female
connector on the other side.

Connector Shroud Protects the connector of an accessory that connects to the wearable computer.

Screen Protectors Package of 3 screen protectors.

Arm Sleeve Extra layer sleeve to wear under wrist mount for extra comfort and hygiene.
RCH50 Rugged Cabled Enables hands-free voice-directed mobility communication. An audible mono headset
Headset with noise cancelling boom microphone helps survive harsh environments.

Software Enterprise Mobility Developer Kits available at:

http://www.motorola.com/enterprisemobility/support.

Device Configuration Package (DCPforWT40x0c50) and Platform SDK

(PSDK40x0c50) for WT40x0, available at:0
http://www.motorola.com/enterprisemobility/support.
Getting Started 1-5

Scan LED
Connector
Rotating Scan Assembly

Exit Window

Ring Mount
Finger Strap Trigger Assembly
Scan Trigger

Figure 1-4 RS409 Scanner

Scan LED

Trigger
Connector
Exit Window Protective Cap

Scan Button Trigger Cable

Interface Cable

Figure 1-5 RS309 Scanner

1-6 WT4070/90 Wearable Terminal User Guide

Figure 1-6 RS507 Scanner

Getting Started 1-7

Getting Started
In order to start using the wearable terminal for the first time:

• Install the main battery

• Charge the main battery and backup battery
• Install the wearable terminal onto the wrist mount
• Install an optional scanner
• Start the wearable terminal.

NOTE The main battery can be charged before or after installation into the wearable terminal. Use the
Single Slot USB cradle or Four Slot Spare Battery Charger to charge the main battery before
installation, or the Single Slot USB cradle or Four Slot Ethernet cradle to charge the main battery
after installation.

Installing and Removing the Main Battery

Installing the Main Battery
Before using the wearable terminal, install a lithium-ion (Li-ion) battery by placing the battery into the wearable
terminal as shown in Figure 1-7.

NOTE Ensure the battery is fully inserted. An audible click can be heard as the battery is fully inserted. A partially
inserted battery may result in unintentional data loss.

When a battery is installed in a wearable terminal for the first time the wearable terminal boots and powers on
automatically.

Figure 1-7 Installing the Main Battery

1-8 WT4070/90 Wearable Terminal User Guide

Charging the Battery

CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 4-3.

Charging the Main Battery and Memory Backup Battery

Before using the wearable terminal for the first time, charge the main battery until the amber Charge Status LED
remains lit (see Table 1-3 on page 1-8 for charge status indications).

The wearable terminal is equipped with a memory backup battery which automatically charges from the main
battery whether or not the wearable terminal is operating or is in suspend mode. The memory backup battery
retains data in memory for at least 30 minutes when the wearable terminal's main battery is removed or fully
discharged. When the wearable terminal is used for the first time or after the memory backup battery has fully
discharged, the memory backup battery requires approximately 15 hours to fully charge. Do not remove the main
battery from the wearable terminal for 15 hours to ensure that the memory backup battery fully charges. If the main
battery is removed from the wearable terminal or the main battery is fully discharged, the memory backup battery
completely discharges in several hours.

When the wearable terminal reaches a very low battery state, the combination of main battery and backup battery
retains data in memory for at least 24 hours.

NOTE Do not remove the main battery within the first 15 hours of use. If the main battery is removed before the
backup battery is fully charged, data may be lost.

Charge the wearable terminal with an installed main battery using either the Single Slot USB cradle or the Four Slot
Ethernet cradle.

To charge the main battery:

1. Ensure the cradle used to charge the main battery is connected to the appropriate power source.

2. Insert the wearable terminal into a cradle.

3. The wearable terminal starts to charge automatically. The amber Charge Status LED lights to indicate the
charge status. See Table 1-3 for charging indications. The standard capacity battery fully charges in less than
four hours and the extended battery fully charges in less than eight hours.

Table 1-3 Wearable Terminal LED Charge Indicators

LED Indication

Off Wearable terminal is not in cradle. Wearable terminal not placed correctly. Charger is not
powered.

Fast Blinking Amber Charging error:

• Temperature is too low or too high.
• Charging has gone on too long without completing (typically eight hours).
Slow Blinking Amber Wearable terminal is charging.

Solid Amber Charging complete.

Note: When the battery is initially inserted in the wearable terminal, the amber LED flashes
once if the battery power is low or the battery is not fully inserted.
Getting Started 1-9

Charging Spare Batteries

Use the following accessories to charge spare batteries:

• Single Slot USB Cradle

• Four Slot Spare Battery Charger.
To charge a spare battery:

1. Ensure the accessory used to charge the spare battery is connected to the appropriate power source.

2. Insert the spare battery into the accessory’s spare battery charging slot with the charging contacts facing down
(over the charging pins) and gently press down on the battery to ensure proper contact.

3. The battery starts to charge automatically. The amber charge LED on the accessory lights to show the charge
status. See Chapter 3, Accessories for accessory charge LED indicator definitions.
The standard capacity battery fully charges in less than four hours and the extended capacity battery fully charges
in less than eight hours.

Removing the Main Battery

To remove the main battery:
1. Prior to removing the battery, ensure that the wearable terminal is in suspend mode. If the wearable terminal is
not in suspend mode, press the Power button to place the wearable terminal in suspend mode.

2. Press the battery release button. The battery partially ejects from the wearable terminal.

3. Remove the battery from the wearable terminal.

Battery Release

Figure 1-8 Removing the Main Battery

1 - 10 WT4070/90 Wearable Terminal User Guide

Installing the Wrist Mount

The wrist mount provides the mounting of the wearable terminal on the forearm for hands-free applications. Refer
to the Wrist Mount Installation Guide for information on the wrist mount.

Mounting Bracket

Release Lever
Figure 1-9 Wrist Mount

To install the wrist mount:

1. Determine which arm the wrist mount will be used on.

2. Install the short strap on the end closest to the wrist.

3. Install the long strap on the other end.

4. Slide the hand into the wrist mount.

5. Tighten the straps.

6. Align the cleat on the back of the wearable terminal with the mounting bracket on the wrist mount.

Mounting Bracket

Figure 1-10 Aligning the Cleat

7. Slide the wearable terminal onto the wrist mount until it clicks into place.

8. If necessary, loosen and re-tighten the straps.

Getting Started 1 - 11

Figure 1-11 Wearable Terminal and Wrist Mount

To remove the wearable terminal from the wrist mount, press down on the release lever and slide the wearable
terminal out.

Release Lever

Figure 1-12 Wearable Terminal Removal

1 - 12 WT4070/90 Wearable Terminal User Guide

Install a Hip Mount

The hip mount allows the user to mount the wearable terminal on the hip for use in voice picking applications. An
RS309 or RS409 scanner with an extended cable is required when using the hip mount.
Slide the wearable terminal into the hip mount.

Figure 1-13 Insert Wearable Terminal into Hip Mount

Close the front flap followed by the back flap.

Figure 1-14 Close Hip Mount Flaps

Slide a belt through the belt loop on the back of the hip mount. The wearable terminal can be mounted right-side up
or up-side down depending upon user preference or application.
Getting Started 1 - 13

Figure 1-15 Hip Mount on Belt

Connect accessories as required.

Routing an Extended Cable Scanner

When using an RS309 or RS409 scanner with the wearable terminal mounted on the hip, the extended cable
version is required.

Motorola offers for sale cable clips, which attach to clothing and hold the scanner cable so that the cable does not
interfere with the user. The cable clips are similar to badge clips and can be purchased at any office supply store as
well.

Figure 1-16 Routing RS409 Scanner Cable from Hip to Hand

1 - 14 WT4070/90 Wearable Terminal User Guide

Figure 1-17 Routing RS309 Scanner Cable from Hip to Hand

Connecting a Scanner
The RS309 and RS409 scanners and the RS507 imager can be used with the wearable terminal. See RS309
Scanner on page 3-10 and RS409 Scanner on page 3-8 for procedures for connecting the scanner to the wearable
terminal. Refer to the RS507 Product Reference Guide for procedures for connecting the imager to the wearable
terminal.

Starting the Wearable Terminal

Press the Power button to turn on the wearable terminal. If the wearable terminal does not power on, perform a
cold boot. See Resetting the Wearable Terminal on page 2-17.

NOTE When a battery is fully inserted in a wearable terminal for the first time, upon the wearable terminal’s first
power up, the device cold boots and powers on automatically.

WT4070/90 Boot Up
When the WT4070/90 is powered on for the first time the splash screen (Figure 1-18) appears for a short period of
time followed by the Start Up window on non-touch configurations and the calibration screen on touch enabled
configurations.
Getting Started 1 - 15

Figure 1-18 Splash Screen

OEM VERSION 02.17.0001 OEM VERSION 03.17.0001 OEM VERSION 04.20.0004 or

05.30.0001

Figure 1-19 Start Up Window

Use the Calibration screen to align the touch screen:

1. Carefully press and briefly hold on the center of the Calibration screen target. Repeat the procedure as the
target moves and stops at different locations on the screen. This enters the new calibration settings.

Calibration Screen Confirm Calibration

Screen

Figure 1-20 Calibration Screen

2. Once all of the new calibration settings are input, tap the screen or press the ENTER button to save the new
calibration settings. Press ESC to discard the new calibration settings.

Voice Only WT4090 Boot Up

When the Voice Only WT4090 is powered on for the first time the three LEDs on the front housing blink as follows:
1 - 16 WT4070/90 Wearable Terminal User Guide

1. Application Controlled LED and Battery Status LED on.

2. All LEDs Off.

3. Application Controlled LED on, Battery Status LED on, WLAN Status LED on.

4. WLAN Status LED off, Battery Status LED off, Application Controlled LED off.

The WLAN Status LED blinks indicating that the wireless connection is not connected or is solid indicating that the
wireless connection is connected.
Chapter 2 Using the Wearable Terminal

Introduction
This chapter explains the physical buttons and controls on the wearable terminal, and provides basic instructions
for using the wearable terminal, including powering on and resetting the wearable terminal, using a headset,
entering information and scanning.

This chapter also details the operation of the Windows CE 5.0 operating system including the desktop, applications
and settings. Depending upon the programs installed on the wearable terminal, some of these items may not be
available.

Power Button
Press the Power button to turn the wearable terminal screen on and off (suspend mode). The wearable terminal is
on when the screen is on and the wearable terminal is in suspend mode when the screen is off. For more
information, see Starting the Wearable Terminal on page 1-14.

Power Button

Figure 2-1 Power Button

The Power button is also used to reset the wearable terminal by performing a warm or cold boot.

• Warm Boot (Soft Reset) - Resets the wearable terminal.

• Cold Boot (Hard Reset) - Resets the wearable terminal, removes all added applications and restores all
factory default settings.
2-2 WT4070/90 Wearable Terminal User Guide

LED Indicators
The Charge Status LED indicates the wearable terminal charging status when the WT4090 is in a cradle. Table 2-1
describes the Charge Status LED indications.

Charge Status LED

Figure 2-2 Wearable Terminal LED Indicators

Table 2-1 Charge Status LED Indications

LED State Indication

Charge Status LED Off Wearable terminal is not in cradle. Wearable terminal
not placed correctly. Charger is not powered.

Slow Blinking Amber Main battery in wearable terminal is charging.

Fast Blinking Amber Charging error:

• Temperature is too low or too high.
• Charging has gone on too long without
completing (typically eight hours).

Solid Amber Charging complete.

Note: When the battery is initially inserted in the
wearable terminal, the amber LED flashes once if the
battery power is low or the battery is not fully inserted.
Using the Wearable Terminal 2-3

Application
Controlled LED Battery Status LED WLAN Status LED Charging Status LED

Figure 2-3 Voice Only WT4090 LED Indicators

The Voice Only WT4090 has three status LEDs. Table 2-2 lists the default LED indications. LED functionality can
be changed by an application.

Table 2-2 Voice Only WT4090 LED Indications

LED State Indication

WLAN Status LED (Green) Off Battery completely discharged or device error. Contact
system administrator.

Blinking Voice Only WT4090 is not connected to a wireless

network.

Solid Voice Only WT4090 is connected to a wireless

network.

Battery Status LED (Light Off Battery charge level is greater than 30%
Green)
Blinking Battery charge level is less than 30%.

Application Controlled LED - Application dependent.

(Yellow)
2-4 WT4070/90 Wearable Terminal User Guide

Keypads
The wearable terminal has the following keypads:

• Two-color alphanumeric keypad

• Triple-tap (cell phone like) alphanumeric keypad
• Voice Only keypad.

Two-color Alphanumeric Keypad

The two-color alphanumeric keypad contains application keys, scroll keys and function keys. The keypad is
color-coded to indicate the alternate function keys (blue, orange and gray). Note that keypad functions can be
changed by an application so the wearable terminal’s keypad may not function exactly as described. See Table 2-3
on page 2-4 for key and button descriptions and Table 2-5 on page 2-7 for the keypad’s special functions.

Figure 2-4 Two-color Alphanumeric Keypad

Table 2-3 Two-color Alphanumeric Keypad Descriptions

Key Description

Orange Press and release the Orange key to activate alphabetic characters (shown on the
keypad in orange). The icon appears on the Windows CE desktop taskbar.

Gray Press and release the Gray key to activate alphabetic characters (shown on the keypad in
gray). The icon appears on the Windows CE desktop taskbar.
Using the Wearable Terminal 2-5

Table 2-3 Two-color Alphanumeric Keypad Descriptions (Continued)

Key Description

Blue Press and release the Blue key to activate the keypad alternate functions (shown on the
keypad in blue). The icon appears on the Windows CE desktop taskbar.

Scroll Keys Moves up or down from one item to another or increases/decreases specified values.
Moves left or right from one item to another when used with the Blue key. For each left or
right scroll, the Blue key must be pressed first.

ESC Exits the current operation.

Alphanumeric In default state, produces the numeric value on the key.

In Left Alpha state, produces the lower case alphabetic characters in the orange area. In
Right Alpha state, produces the lower case alphabetic characters in the gray area.
When the SHIFT key is pressed in the Alpha state, the upper case alphabetic characters
on the key are produced. For example, press and release the Orange key, press and
release the SHIFT key and then press the 4 key once to produce the letter ‘G’.

BKSP Backspace function. Space function when used with the Blue key.

CTRL (Control) Press and release the CTRL key to activate the keypad alternate CTRL functions. The
icon appears on the Windows CE desktop taskbar.
Press the Blue key followed by the CTRL key to activate the keypad alternate ALT
functions. The icon appears on the Windows CE desktop taskbar.

SHIFT Press and release the SHIFT key to activate the keypad alternate SHIFT functions. The
icon appears on the Windows CE desktop taskbar.

ENTER Executes a selected item or function.

TAB Move the focus to the next field in a window.

P1 Programmable key. When used with the Blue key, toggles the keypad backlight on and
off.
P2 Programmable key. When used with the Blue key, toggles the display backlight on and off.
2-6 WT4070/90 Wearable Terminal User Guide

Triple-Tap Alphanumeric Keypad

The triple-tap alphanumeric keypad contains application keys, scroll keys and function keys. The keypad is
color-coded to indicate the alternate function keys (blue and orange). Note that keypad functions can be changed
by an application so the wearable terminal’s keypad may not function exactly as described. See Table 2-4 on page
2-6 for key and button descriptions and Table 2-5 on page 2-7 for the keypad’s special functions.

Figure 2-5 Triple-tap Alphanumeric Keypad

Table 2-4 Triple-tap Alphanumeric Keypad Descriptions

Key Description

Orange Press and release the Orange key to activate alphabetic characters (shown on the keypad in
orange). The icon appears on the Windows CE desktop taskbar.

Blue Press and release the Blue key to activate the keypad alternate functions (shown on the keypad
in blue). The icon appears on the Windows CE desktop taskbar.

ESC Exits the current operation.

Using the Wearable Terminal 2-7

Table 2-4 Triple-tap Alphanumeric Keypad Descriptions (Continued)

Key Description

Alphanumeric In default state, produces the numeric value on the key.

In Alpha state, produces the lower case alphabetic characters shown in orange text. For
example, press and release the Orange key and then press the 5 key twice to produce the
lowercase letter ‘k’.
When the SHIFT key is pressed in Alpha state, the upper case alphabetic characters on the key
are produced. For example, press and release the Orange key, press and release the SHIFT key
and then press the 5 key twice to produce the uppercase letter ‘K’.

BKSP Backspace function. Space function when used with the Blue key.
CTRL (Control) Press and release the CTRL key to activate the keypad alternate CTRL functions. The icon
appears on the Windows CE desktop taskbar.
Press the Blue key followed by the CTRL key to activate the keypad alternate ALT functions. The
icon appears on the Windows CE desktop taskbar.

SHIFT
Press and release the SHIFT key to activate the keypad alternate SHIFT functions. The icon
appears on the Windows CE desktop taskbar.

ENTER Executes a selected item or function.

TAB Move the focus to the next field in a window.

P1 Programmable key. When used with the Blue key, toggles the keypad backlight on and off.

P2 Programmable key. When used with the Blue key, toggles the display backlight on and off.

P3 Programmable key.

The keypad is color-coded to indicate the alternate function key (blue) values and the alternate ALPHA key
(orange) values. See Table 2-5 for the special character generation.

Table 2-5 Special Character Generation Map

Special Character Two-color Keypad Triple-tap Keypad

/ Blue - Orange - 0 Blue - Orange - 0

(forward slash)

[ Blue - Orange - 2 Blue - Orange - 2

(open square bracket)
] Blue - Orange - 3 Blue - Orange - 3
(close square bracket)

\ Blue - Orange - 4 Blue - Orange - 4

(Backslash)

` Blue - Orange - 5 Blue - Orange - 5

(apostrophe)
, Blue - Orange - 6 Blue - Orange - 6
(comma)
2-8 WT4070/90 Wearable Terminal User Guide

Table 2-5 Special Character Generation Map (Continued)

Special Character Two-color Keypad Triple-tap Keypad

. Blue - Orange - 7 or Blue - Orange - 7

(period) Orange - TAB

; Blue - Orange - 8 Blue - Orange - 8

(semi-colon)

= Blue - Orange - 9 Blue - Orange - 9

(equal sign)

- Blue - Orange - Tab Blue - Orange - Tab

(dash)
! Shift - 1 Shift - 1
(exclamation point)

@ Shift - 2 Shift - 2
(at sign)

# Shift - 3 Shift - 3
(Pound sign)

$ Shift - 4 Shift - 4
(dollar sign)

% Shift - 5 Shift - 5
(percent sign)

^ Shift - 6 Shift - 6
(carat)
& Shift - 7 Shift - 7
(ampersand)

* Shift - 8 Shift - 8
(asterisk)

( Shift - 9 Shift - 9
(open parenthesis)
) Shift - 0 Shift - 0
(close parenthesis)

‘ Blue - Orange - 1 Blue - Orange - 1

(single quote)

“ Shift - Blue - Orange - 1 Shift - Blue - Orange - 1

(double quote)

? Shift - Blue - Orange - 0 Shift - Blue - Orange - 0

(question mark)

{ Shift - Blue - Orange - 2 Shift - Blue - Orange - 2

(open curly bracket)
Using the Wearable Terminal 2-9

Table 2-5 Special Character Generation Map (Continued)

Special Character Two-color Keypad Triple-tap Keypad

} Shift - Blue - Orange - 3 Shift - Blue - Orange - 3

(close curly bracket)

| Shift - Blue - Orange - 4 Shift - Blue - Orange - 4

(pipe)

~ Shift - Blue - Orange - 5 Shift - Blue - Orange - 5

(tilde)

< Shift - Blue - Orange - 6 Shift - Blue - Orange - 6

(less than sign)
> Shift - Blue - Orange - 7 Shift - Blue - Orange - 7
(greater than sign)

: Shift - Blue - Orange - 8 Shift - Blue - Orange - 8

(colon)

+ Shift - Blue - Orange - 9 Shift - Blue - Orange - 9

(plus sign)
_ Shift - Blue - Orange - Tab Shift - Blue - Orange - Tab
(underscore)

Voice Only Keypad

The voice only keypad contains three programmable function keys.

Figure 2-6 Voice Only Keypad

2 - 10 WT4070/90 Wearable Terminal User Guide

Display

NOTE To view the software versions on the Voice Only WT4090, the Voice Only WT4090 must be
connected to a host computer running remote desktop software. See the WT4070/90 Wearable
Terminal Integrator Guide for more information.

The wearable terminal is factory installed with the Windows CE 5.0 operating system. When the wearable terminal
starts, it automatically launches the Start Up application.

NOTE A customer specific application can be configured to automatically start-up and the Windows CE
5.0 desktop and Start Up application might not be visible or accessible.

Start Up Window

NOTE Start Up menu does not automatically launch on the Voice Only WT4090.

The Start Up window allows the user to launch specific applications by using the keypad. Either scroll up and down
using the arrow keys and select Enter to select an item or press the numeric key associated with the item. If the
Start Up window is closed, launch the Start Up window by selecting OTL on the desktop.

OEM VERSION 02.17.0001 OEM VERSION 03.17.0001 OEM VERSION 04.20.0004 or

05.30.0001

Figure 2-7 Start-up Window

Table 2-6 Start Up Item Descriptions

Launch
Item Description
Number

RD Client or Rapid 1 Launches the Rapid Deployment application. Refer to the WT4070/90
Deployment Client Wearable Terminal Integrator Guide for more information.

AirBEAM Client 2 Launches the AirBEAM Client application. Refer to the WT4070/90
Wearable Terminal Integrator Guide for more information.

Wavelink TelnetCE 3 Launches the Wavelink Client application.

Internet Explorer 4 Launches the Microsoft Pocket Internet Explorer application.

Using the Wearable Terminal 2 - 11

Table 2-6 Start Up Item Descriptions (Continued)

Item Launch Description

Number

Utilities folder 5 Opens a sub-window that contains utilities, such as: Control Panel, File
Explorer, BT HID Connect, BT Printer Connect and test applications. For
more information on the Control Panel and File Explorer, refer to the
Symbol Application Guide for Symbol Devices, p/n 72E-68901-xx.

Demo Apps 6 Opens a sub-window that contains sample demonstration applications.

Exit 7 Closes the Start Up window.

Windows CE 5.0 Desktop

The following paragraphs describe the Windows CE 5.0 desktop. Depending upon the customer’s configuration of
the wearable terminal, the desktop may not be available.

Status Icons
The Taskbar at the bottom of the window displays the active programs, current time, battery status and
communication status.

Status Icons
Desktop Button

Start Button Open Program Clock

Figure 2-8 Taskbar

2 - 12 WT4070/90 Wearable Terminal User Guide

Status icons are shown in the taskbar to indicate present status of the wearable terminal.

Table 2-7 Status Icons

Status
Description
Icon
Indicates the current time. The clock can be toggled on and off. Select Start > Settings > Control
Panel > Task and Start Menu.

This icon indicates that the main battery is charging or that the wearable terminal is operating on
external power.

Indicates that the battery is fully charged and the wearable terminal is running on external power.

This icon is displayed when the memory backup battery level is low. Charge the battery.

This icon indicates that the battery is fully charged (100% charged).
The battery status icons provide the battery status in 10% increments from 10% to 100%.

This displays when the terminal is connected to a host computer with ActiveSync.

Wireless connection status icon. Indicates WLAN signal strength.

Bluetooth radio is on.

Bluetooth radio is off.

Bluetooth radio is connected to another Bluetooth device.

Indicates that the SHIFT key is selected.

Indicates that the Blue key is selected.

Indicates that the CTRL key is selected.

Indicates that the ALT key is selected.

Indicates that the Orange key is selected.

Indicates that the Gray key is selected.

Indicates that the Motorola Remote Control software is connected to the wearable terminal.

Using the Keypad to Navigate Applications

NOTE Not available on the Voice Only configuration.

Using the Wearable Terminal 2 - 13

On wearable computers without touch-enabled screens navigation and control of an application is performed using
the keypad.

Key Combinations
The wearable terminal uses special key combinations to easily navigate applications. Table 2-8 lists the key
combinations required to perform various application navigation and control functions.

Table 2-8 Key Combinations

Action Key Combination

Access the Start menu on the taskbar CTRL - ESC

Switch fields within an application TAB

Close windows or cancel operations on some applications ESC or ALT - F4

Access the Task Manager ALT - TAB

Switches to the next window or desktop ALT - ESC

Access a menu bar in an application ALT - ALT

Press a button or select a check box in an application TAB until the item is highlighted then SPACE.

Display a pop-up context menu ALT - ENTER

Throughout this guide you will be instructed to select an item. You must use a key combination to select that item.
For example:

To perform:
“Select Start > Programs > Windows Explorer”

1. Press CTRL and then ESC to open the Start menu.

2. Press the up arrow until the Programs item is highlighted.

3. Press the Blue key and the down arrow to open the Programs sub-menu.
4. Press the down arrow until Windows Explorer is highlighted.

5. Press ENTER key to launch Windows Explorer.

Selecting Items
When using the navigation keys to perform tasks in an application, the active item is highlighted using either a color
background and/or a dashed box.

Highlighted Item

Figure 2-9 Highlighted Items

2 - 14 WT4070/90 Wearable Terminal User Guide

Navigating Menus
Most applications have drop-down menus to perform specific functions. Use the key combination ALT - ALT to open
a menu. Once the menu is open, use the up and down navigation keys to move up and down the menu and use the
left and right navigation keys to move to the next menu item or open a sub-menu. When moving through a menu,
items are highlighted. Once an item is highlighted, press the ENTER key to select that item.

Figure 2-10 Navigating Menus

Navigating Tabs
Some applications contain multiple pages with tabs indicating each page. Use the TAB key to highlight the tab. A
dashed box appears around the tab name. Use the left and right navigation keys to move to the next or previous
tab.

Selected Tab

Figure 2-11 Navigating Tabs

Navigating Fields
To navigate from one field to another, press the TAB key. Repeated pressing of the TAB key cycles the highlighted
cursor through the fields in the window.

Selecting Checkboxes and Radio Buttons

To select or deselect checkboxes and radio buttons press the TAB key until the field is highlighted. Press ALT -
BKSP (SPACE) to select or deselect the checkbox or radio button.
Using the Wearable Terminal 2 - 15

Highlighted Checkbox

Radio Buttons

Figure 2-12 Selecting a Checkbox or Radio Button

Selecting Items in a List

Use a combination of key sequences to select items in a folder or list.

To select continuous items in a folder or list:

1. Open the folder or list.

2. Use the scroll keys to move to the first item to select.

3. Press SHIFT - scroll key (either up or down) to select the next item.

4. Repeat the SHIFT - scroll key combination to select remaining items.

5. Perform the desired function.

To select multiple items in a folder or list:

1. Open the folder or list.

2. Use the scroll keys to move to the first item.

3. Press CTRL - scroll key to move within the list. The item name is outlined.

4. Repeat step 3 to move to the desired item.

5. Press SPACE to highlight the item.

6. Repeat steps 3 through 5 until all items are selected.

7. Perform the desired function.

Screen Calibration

NOTE Not available on the Voice Only and non-touch configurations.

To calibrate the touch screen so the cursor on the touch screen aligns with screen taps:

1. Press Start > Settings > Control Panel > Stylus icon > Calibration tab > Recalibrate button.
2. Carefully press and briefly hold on the center of the Calibration screen target. Repeat the procedure as the
target moves and stops at different locations on the screen. This enters the new calibration settings.
2 - 16 WT4070/90 Wearable Terminal User Guide

Calibration Screen Confirm Calibration

Screen

Figure 2-13 Calibration Screen

3. Once all of the new calibration settings are input, tap the screen or press the ENTER button to save the new
calibration settings. Press ESC to discard the new calibration settings.

Special Character Keypad

NOTE The Special Character Keypad is only available on non-touch screen configurations with a display.

The wearable terminal contains an on-screen Special Character keypad that allows users to enter alphanumeric
and special characters. The keypad looks and functions like a standard keyboard.

To display the Special Character keypad, press the key on the keyboard.

Figure 2-14 Special Character Keypad - Alphanumeric Layer

Use the arrow keys on the keyboard to move the yellow box to highlight a key on the Special Character keypad.
The arrow keys wrap to the next row or column as you navigate with the keys.

To select a character, press the Enter key on the wearable terminal.

If the Enter or arrow keys need to be used by the application instead of the Special Character keypad, press Esc
followed by the arrow or Enter key. This sends the key to the application instead of the Special Character keypad.

Press the ABC key on the Special Character keypad to switch between the alphanumeric layer and the character
layer.
Using the Wearable Terminal 2 - 17

Figure 2-15 Special Character Keyboard - Character Layer

Navigate the keypad in the same manner as described above. To return to the alphanumeric layer, press the CH
key on the keypad.

Pressing CAP or SH switches the keypad to the upper case alphanumeric keypad.

Figure 2-16 Special Character Keyboard in upper case Alphanumeric Mode

Press the key to close the Special Character keypad.

Resetting the Wearable Terminal

There are two types of resets, warm boot and cold boot. A warm boot restarts the wearable terminal by closing all
running programs.

A cold boot also restarts the wearable terminal, but erases all stored records and entries in RAM. Data saved in
flash memory or a memory card is not lost. In addition it returns formats, preferences and other settings to the
factory default settings.

Perform a warm boot first. This restarts the wearable terminal and saves all stored records and entries. If the
wearable terminal still does not respond, perform a cold boot.

Performing a Warm Boot

Hold down the Power button for approximately five seconds. As soon as the wearable terminal starts to perform a
warm boot release the Power button.
2 - 18 WT4070/90 Wearable Terminal User Guide

Performing a Cold Boot

A cold boot restarts the wearable terminal and erases all user stored records and entries that are not saved in flash
memory (Application and Platform folders). Never perform a cold boot unless a warm boot does not solve the
problem.

NOTE Any data previously synchronized with a computer can be restored during the next ActiveSync operation.

To perform a cold boot on a WT4070/90 press and simultaneously hold the 1, 9 and Power button. Do not hold
down any other keys or buttons. The wearable terminal initializes.

To perform a cold boot on a Voice Only WT4090 press and simultaneously hold the P1 and P2 keys and the Power
button. The wearable terminal initializes.
Using the Wearable Terminal 2 - 19

Data Capture
Wearable terminals used with an optional wearable laser scanner allow collection of data by scanning one
dimensional bar codes.

Laser Scanning
Wearable terminals with an optional wearable laser scanner have the following features:

• Reading of a variety of bar code symbologies, including the most popular linear, postal, and 1-D code types.
• Advanced intuitive laser aiming for easy point-and-shoot operation.

Scanning Considerations
Typically, scanning is a simple matter of aim, scan/decode and a few quick trial efforts master it. However, two
important considerations can be used to optimize any scanning performance:

• Range
Any scanning device decodes well over a particular working range — minimum and maximum distances from
the bar code. This range varies according to bar code density and scanning device optics.
Scanning within range brings quick and constant decodes; scanning too close or too far away prevents
decodes. Move the scanner closer and further away to find the right working range for the bar codes being
scanned. However, the situation is complicated by the availability of various integrated scanning modules. The
best way to specify the appropriate working range per bar code density is through a chart called a decode zone
for each scan module. A decode zone simply plots working range as a function of minimum element widths of
bar code symbols.
• Angle
Scanning angle is important for promoting quick decodes. When laser beams reflect directly back into the
scanner from the bar code, this specular reflection can “blind” the scanner.
To avoid this, scan the bar code so that the beam does not bounce directly back. But don’t scan at too sharp an
angle; the scanner needs to collect scattered reflections from the scan to make a successful decode. Practice
quickly shows what tolerances to work within.

NOTE Contact the Symbol Support Center if chronic scanning difficulties develop. Decoding of properly printed bar
codes should be quick and effortless.

Scanning Bar Codes

1. Ensure that a scan enabled application is loaded on the wearable terminal.
2. Aim the scan exit window at the bar code.

3. Press the trigger.

• Ensure the red scan beam covers the entire bar code. The red scan LED lights to indicate that the laser is
on. The green scan LED lights. An audible beep might sound, if the application determines, to indicate the
bar code was decoded successfully.
2 - 20 WT4070/90 Wearable Terminal User Guide

Figure 2-17 Laser Scanner Aiming Pattern

4. Release the trigger.

Scanning Tips
Optimal scanning distance varies with bar code density and scanner optics.

• Hold the scanner farther away for larger symbols.

• Move the scanner closer for symbols with bars that are close together.
NOTE Scanning procedures depend on the application and wearable terminal configuration. An application may
use different scanning procedures from the one listed above.

Scan LED Indicator

The LED on the scanner provides a visual indication of the scan status.

Table 2-9 Scan LED Indicators

LED Status Indication

Off Not scanning.

Solid Red Laser enabled, scanning in process.

Solid Green Successful decode.

Imaging
The wearable terminal with an optional RS507 imager has the following features:

• Omnidirectional (360°) reading of a variety of bar code symbologies, including the most popular linear, postal,
PDF417, and 2D matrix code types.
• The ability to capture and download images to a host for a variety of imaging applications.
• Advanced intuitive laser aiming for easy point-and-shoot operation.
The imager uses digital camera technology to take a digital picture of a bar code, stores the resulting image in its
memory, and executes state-of-the-art software decoding algorithms to extract the data from the image.

Operational Modes
The wearable terminal with optional RS507 imager supports three modes of operation, listed below. Activate each
mode pressing the Scan button.

• Decode Mode: In this mode, the RS507 attempts to locate and decode enabled bar codes within its field of
view. The imager remains in this mode as long as you hold the scan button, or until it decodes a bar code.
Using the Wearable Terminal 2 - 21

NOTE To enable Pick List Mode, download the Control Panel applet from the Support Central web site at
http://www.motorola.com/enterprisemobility/support. Pick List can also be set in an application using a API
command.

• Pick List Mode: This mode allows you to selectively decode a bar code when more than one bar code is in
the RS507’s field of view. To accomplish this, move the aiming crosshair center dot over the required bar
code to decode only that bar code. This feature is ideal for pick lists containing multiple bar codes and
manufacturing or transport labels containing more than one bar code type (either 1D or 2D).
• Image Capture Mode: Use this mode to capture an image within the RS507’s field of view. This is useful for
capturing signatures or images of items like damaged boxes.

Imager Scanning
1. Ensure that a scan-enabled application is loaded on the wearable terminal.
2. Press and hold the scan button.
The red laser aiming pattern turns on to assist in aiming. Ensure the cross-hair is on top of the bar code.
The Decode LED lights red to indicate that scanning is in process, then lights green and a beep sounds, by
default, to indicate the bar code was decoded successfully. Note that when the RS507 is in Pick List Mode, the
imager does not decode the bar code until the crosshair center dot touches the bar code.

Figure 2-18 Imager Aiming Pattern

Figure 2-19 Pick List Mode with Multiple Bar Codes

3. Release the scan button.

NOTE Imager decoding usually occurs instantaneously. The RS507 repeats the steps required to take a digital
picture (image) of a poor or difficult bar code as long as the scan button remains pressed.
2 - 22 WT4070/90 Wearable Terminal User Guide

Waking the Wearable Terminal

The wake up conditions define what actions wake up the wearable terminal after it has gone into suspend mode.
The wearable terminal can go into suspend mode by either pressing the Power button or automatically by control
panel time-out settings. These settings are configurable and the factory default settings are shown in Table 2-10.

Table 2-10 Wakeup Default Settings

Condition for Wakeup Power Button Automatic Time-out

AC power is applied. No Yes

Wearable terminal is inserted into a cradle. No Yes

Wearable terminal is removed from a cradle. No Yes

Wearable terminal is connected to a serial device. No Yes

Wearable terminal is connected to a USB device. No Yes

Wearable terminal is disconnected from a USB No Yes

device.

A key is pressed. No Yes

An attached scanner is triggered. No Yes

Wireless LAN activity is detected. No No

A headset is connected to the wearable terminal. No Yes

Screen Touch (only on touch screen configurations) No No

NOTE If the battery is removed and replaced, the only way to wake up the terminal is by pressing the Power button.
Chapter 3 Accessories

Introduction
The wearable terminal accessories provide a variety of product support capabilities. Accessories include cradles,
cables and scanners.

Cradles
• Single Slot USB cradle charges the wearable terminal main battery and a spare battery. It also synchronizes
the wearable terminal with a host computer through either a serial or a USB connection.
• Four Slot Ethernet cradle charges up to four wearable terminal batteries and synchronizes the wearable
terminals with a host computer through an Ethernet connection.
• Four Slot Spare Battery Charger charges up to four wearable terminal spare batteries.

Scanners
• RS309 scanner
• RS409 scanner
• RS507 imager.

Accessories
• Freezer pouch
• Hip Mount
• Wired Headset
• Connector shroud.
3-2 WT4070/90 Wearable Terminal User Guide

Single Slot USB Cradle

CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 4-3.

This section describes how to use a Single Slot USB cradle (Figure 3-1) with the wearable terminal. For USB
communication setup procedures refer to the WT4090 Integrator Guide.

Scanner Placed in Well

Spare Battery

Spare Battery
Charging LED

Figure 3-1 Single Slot USB Cradle

CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an
alternative power supply will void the product warranty and may cause product damage. See Appendix B,
Regulatory Information for the power supply regulatory compliance statement.

The Single Slot USB Cradle:

• Provides 5.4 VDC power for operating the wearable terminal.

• Provides USB port for data communication between the wearable terminal and a host computer or other
serial devices (e.g., a printer).

NOTE The normal function of the product may be disturbed by Strong Electro Magnetic Interference (for
example, static electricity). If so, simply remove and re-insert the terminal to resume normal operation.
In case the function does not resume, please use the product in another location.
Accessories 3-3

• Synchronizes information between the wearable terminal and a host computer. (With customized or third
party software, it can also be used to synchronize the wearable terminal with corporate databases.)
• Charges the wearable terminal’s battery and a spare battery.
• Provides a location for storing a scanner when a wearable terminal is docked in the cradle.

Battery Charging Indicators

The Single Slot USB cradle can charge the wearable terminal’s main battery and a spare battery simultaneously.
The wearable terminal’s amber Charge Status LED indicates the status of the battery charging in the wearable
terminal. See Table 1-3 on page 1-8 for charging status indications.

The amber Spare Battery Charging LED on the cradle (see Figure 3-1 on page 3-2) indicates the status of the
spare battery charging in the cradle. See Table 3-1 for charging status indications. The standard capacity battery
fully charges in less than four hours and the extended capacity battery fully charges in less than eight hours.

Table 3-1 Spare Battery LED Charging Indicators

Spare Battery LED
Indication
(on cradle)

Off No spare battery in well; spare battery not placed correctly; cradle is not powered.

Fast Blinking Amber Charging error:

• Temperature is too low or too high.
• Charging has gone on too long without completing (typically eight hours).
Slow Blinking Amber Spare battery is charging.

Solid Amber Charging complete.

3-4 WT4070/90 Wearable Terminal User Guide

Four Slot Ethernet Cradle

CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 4-3.

This section describes how to use a Four Slot Ethernet cradle (Figure 3-2) with the wearable terminal. For Ethernet
communication setup procedures refer to the WT4090 Integrator Guide.

Scanner Well

Figure 3-2 Four Slot Ethernet Cradle

The Four Slot Ethernet cradle:

• Connects up to four wearable terminals to an Ethernet network.

• Provide 5.4 VDC power for operating the wearable terminal and charging the battery.
• Simultaneously charges up to four wearable terminals (with batteries installed).
You cannot ActiveSync using the Four Slot Ethernet cradle. To ActiveSync with a host computer use the Single Slot
USB cradle.

CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 9 A. Use of an alternative
power supply will void the product warranty and may cause product damage. See Appendix B, Regulatory
Information for the power supply regulatory compliance statement.
Accessories 3-5

Battery Charging
The four slot Ethernet cradle can charge up to four wearable terminals simultaneously. To charge the wearable
terminal:

1. Slide the wearable terminal into the wearable terminal slot.

2. The wearable terminal amber Charge Status LED indicates the wearable terminal battery charging status. The
standard capacity battery usually charges in less than four hours and the extended capacity battery fully
charges in less than eight hours. See Table 3-1 for charging status indications.

3. When charging is complete, remove the wearable terminal from the cradle.

LED Charge Indications

The Four Slot Ethernet cradle uses the wearable terminal amber Power LED to indicate the battery charging
status. See Table 3-1 on page 3-3 for charging status indications.

Speed LED
The green Speed LED lights to indicate that the transfer rate is 100 Mbps. When it is not lit it indicates that the
transfer rate is 10 Mbps.

Link LED
The yellow Link LED blinks to indicate activity, or stays lit to indicate that a link is established. When it is not lit, it
indicates that there is no link.

Battery Charging Indicators

The wearable terminal’s amber charge LED indicates the status of the battery charging in the wearable terminal.
See Table 1-3 on page 1-8 for charging status indications.

The standard capacity battery fully charges in less than four hours and the extended capacity battery fully charges
in less than eight hours.
3-6 WT4070/90 Wearable Terminal User Guide

Four Slot Spare Battery Charger

CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 4-3.

This section describes how to use the Four Slot Spare Battery Charger to charge up to four wearable terminal
spare batteries.

Spare Battery Charging Well (4)

Spare Battery

Spare Battery Charging LEDs (4)

Figure 3-3 Four Slot Spare Battery Charger

CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an alternative
power supply will void the product warranty and may cause product damage. See Appendix B, Regulatory
Information for the power supply regulatory compliance statement.

Spare Battery Charging with the Four Slot Spare Battery Charger
Insert the battery into a spare battery charging slot and gently press down on the battery to ensure proper contact.

Battery Charging Indicators

An amber LED is provided on each battery charging well. See Table 3-2 for charging status indications.The
standard capacity battery usually charges in less than four hours and the extended capacity battery fully charges in
less than eight hours.

Table 3-2 Spare Battery LED Charging Indicators

LED Indication

Off No spare battery in slot; spare battery not placed correctly; cradle is not powered.

Fast Blinking Amber Charging error:

• Temperature is too low or too high.
• Charging has gone on too long without completing (typically eight hours).
Accessories 3-7

Table 3-2 Spare Battery LED Charging Indicators (Continued)

LED Indication

Slow Blinking Amber Spare battery is charging.

Solid Amber Charging complete.

3-8 WT4070/90 Wearable Terminal User Guide

RS409 Scanner
To connect the RS409 scanner to the wearable terminal:

NOTE There are two RS409 configurations available. The short cable configuration connects the RS409 to the
wearable terminal mounted on the arm. The extended cable configuration connects the RS409 to the WT4090
mounted on the hip.

1. Remove the rubber plug from the wearable terminal interface connector.

2. Connect the RS409 interface cable to the wearable terminal interface connector. If the wearable terminal is
mounted on the arm, connect the cable to the interface connector closest to the wrist.

Scanner Cable Connector Interface Connector

Figure 3-4 Connecting RS409 to Wearable Terminal

3. If using the extended cable configuration, route the scanner cable up to the shoulder and down to the hand that
the scanner mounts on. Attach two cable clips to clothing and secure cable to cable clip.

Figure 3-5 Cable Clip Installation

4. Rotate the trigger assembly to the correct position for the hand that the scanner mounts to.
Accessories 3-9

5. Slide the RS409 onto the index finger with the scan trigger next to the thumb.

Figure 3-6 Place the RS409 on Index Finger

6. Tighten the finger strap.

Figure 3-7 Tightening Straps

7. If required, cut excess finger strap material.

After connecting the scanner, warm boot the wearable terminal. See Resetting the Wearable Terminal on page
2-17 for information on performing a warm boot.
3 - 10 WT4070/90 Wearable Terminal User Guide

RS309 Scanner
The RS309 connects to the wearable terminal and mounts on the back of either hand using the RS309 glove.

1. Remove the rubber plug from the wearable terminal interface connector.

2. Connect the RS309 trigger cable to the back of the RS309.

Trigger Connector

Figure 3-8 Connecting Trigger Cable to RS309

3. Connect the end of the RS309 interface cable to the wearable terminal interface connector. If the wearable
terminal is mounted on the arm, connect the cable to the interface connector closest to the wrist.

4. If the wearable terminal is mounted on the hip, route the interface cable up to the shoulder and down to the
hand that the scanner mounts on. Attach two cable clips to clothing and secure cable to cable clip.

Figure 3-9 Cable Clip Installation

Accessories 3 - 11

5. Mount the RS309 on the RS309 glove. Refer to the RS309 Glove Installation Guide for information on
mounting the RS309.

6. Route the trigger cable around the side of the RS309, next to the index finger.

7. Slide the trigger mount on the index finger, with the button positioned next to the thumb, and adjust the velcro
strap.

Figure 3-10 RS309 on Back of Hand

After connecting the scanner, warm boot the wearable terminal. See Resetting the Wearable Terminal on page
2-17 for information on performing a warm boot.
3 - 12 WT4070/90 Wearable Terminal User Guide

RS507 Imager
Refer to the RS507 Hands-free Imager Quick Reference Guide, p/n 72-115987-xx and the RS507 Hands-free
Imager Product Reference Guide, p/n 72E-120802-xx for detailed information.

Freezer Pouch

NOTE Wearable computers with standard capacity batteries must use the Standard Capacity Battery Freezer Pouch
while wearable computers with extended capacity batteries must use the Extended Capacity Battery Freezer
Pouch. See Accessories on page 1-3 for more information.

CAUTION Do not use the wearable terminal with touch screen in the freezer pouch or in environments that are
below -20°C (-4°F).

The freezer pouch allows the user to use the wearable terminal in a freezer environment on the hip or wrist for use
in voice picking applications. An RS309 or RS409 scanner with an extended cable is required when mounting the
freezer pouch on the hip mount, if scanning is also part of the application.

In order to keep the wearable terminal at a safe operating temperature in a meat or ice cream freezer, the freezer
pouch insulates the wearable terminal to keep the heat generated by the wearable terminal within the pouch. The
pouch is not heated. There are no batteries to worry about or electronics within the pouch.

The freezer pouch can be either hip-mounted or wrist-mounted. For hip-mounting, there is a belt loop on its back
for attached a belt (sold separately). For wrist-mounting, customers can buy either a set of standard-length or
longer-length wrist straps and use them with the pouch. The longer-length wrist straps are recommended for
wrist-mounting over coats. The freezer pouch has openings on each side for wearable scanners and headset
adapters.

While the freezer pouch is designed to allow workers to use the wearable terminal in meat and ice cream freezers,
there are some very important limitations to follow:

• Do not use in environments that are below -30°C (-22°F).

• Do not allow the wearable terminal (with or without the freezer pouch) to remain in the suspend mode in
environments below -20°C (-4°F) for more than 10 minutes. This prevents the wearable terminal from cooling
down to the ambient freezer temperature. The pouch maintains the wearable terminal at a sufficient
temperature while it is in use, but lengthy periods of inactivity bring the wearable terminal below its operating
temperature.
• Do not store wearable terminals in the meat or ice cream freezer. As explained above, this would allow the
wearable terminals to chill to the ambient freezer temperature, which is below their operating temperature.
Furthermore, if batteries were left in wearable terminals stored in the freezer, the batteries themselves could
freeze, which could damage them. At the least, they would not function while frozen.
• Batteries cannot be charged below 0°C (32°F). Motorola cradles and battery chargers have an automatic
shut-off to insure this.
• If using wearable scanners with the wearable terminal in the meat or ice cream freezer for a shift, remember
that the RS309 freezer configuration is the correct scanner to choose, due to its lower operating temperature
range and its desiccant pack to remove condensation.

Slide the wearable terminal into the freezer pouch.

Accessories 3 - 13

Figure 3-11 Insert Wearable Terminal into Freezer Pouch

Close the front flap followed by the back flap.

Figure 3-12 Close Freezer Pouch Flaps

Slide a belt through the belt loop on the back of the freezer pouch. The wearable terminal can be mounted
right-side up or up-side down depending upon user preference or application.
3 - 14 WT4070/90 Wearable Terminal User Guide

Wired Headset
You can use a mono headset with a microphone for audio communication with an audio enabled application. The
Headset Cable Adapter is required to connect a headset with the wearable terminal.

Headset Cable Adapter

Figure 3-13 Typical Headset Connected to Headset Adapter

Accessories 3 - 15

The headset cable adapter connects the headset to the wearable terminal. Connect the headset connect end of
the adapter to the headset connector. Plug the other end of the adapter to the wearable terminal interface
connector.

NOTE Not all headset plugs are compatible with the headset cable adapter.

CAUTION When disconnecting the headset from the headset adapter, pull the two connectors away from
each. Do not bend connectors to disconnect.

Figure 3-14 Disconnecting Headset from Headset Adapter

Figure 3-15 Headset Connected to wearable Terminal on Hip

3 - 16 WT4070/90 Wearable Terminal User Guide

Connector Shroud
Assembly
1. Remove cable from wearable terminal, if required.

2. Align the cable connector with the connector shroud bottom housing. Ensure that the disconnect button on the
connector faces up.

Disconnect Button

Bottom Housing
Figure 3-16 Installing Bottom Housing

3. Place the cable connector into the shroud bottom housing as shown.

Figure 3-17 Installing Top Housing

4. Press the top housing into the bottom housing. The housings will snap together.

5. Plug the cable connector into the wearable terminal connector.

Disconnecting the Cable from the Wearable Terminal

NOTE Follow the instructions below when disconnecting the cable connector and shroud from the wearable terminal.
Once the shroud is installed on the connector, do not disassemble the shroud by prying it apart.

1. Turn the wearable terminal over to expose the top housing of the shroud.

2. Push the tip of a ball-point pen through the hole in the connector shroud top housing. The connector
disengages from the wearable terminal.
Accessories 3 - 17

Connector Eject Hole

Figure 3-18 Disconnecting Connector with Shroud

3 - 18 WT4070/90 Wearable Terminal User Guide
Chapter 4 Maintenance & Troubleshooting

Introduction
This chapter includes instructions on cleaning and storing the wearable terminal, and provides troubleshooting
solutions for potential problems during wearable terminal operation.

Maintaining the Wearable Terminal

For trouble-free service, observe the following tips when using the wearable terminal:

• Do not scratch the touch screen of the wearable computer. When activating with the wearable computer
touch screen, use finger tips. Never use a pen or pencil or other sharp object on the surface of the screen.

Motorola requires using a screen protector, p/n KT-114032-01R or KT-114032-02R.

• A screen protector is applied to the wearable computer touch screen. Motorola requires using this to
minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays.
Benefits include:
• Protection from scratches and gouges
• Durable touch surface with tactile feel
• Abrasion and chemical resistance
• Keeping the device’s screen looking new
• Quick and easy installation.
• Protect the wearable terminal with a touch screen from temperature extremes.
• Do not store or use the wearable terminal with a touch screen in any location that is extremely dusty, damp,
or wet.
• Use a soft lens cloth to clean the wearable terminal display/touch panel.
• Periodically replace the rechargeable Li-ion battery to ensure maximum battery life and product performance.
Battery life depends on individual usage patterns.
• The screen of the wearable terminal contains glass. Take care not to drop the wearable terminal or subject it
to strong impact.
4-2 WT4090 Wearable Terminal User Guide

• Regularly replace all Velcro® straps on the wrist mount and wearable scanners, to ensure adequate
adhesion of the Velcro.

Wrist Mount Cleaning Instructions

It may be necessary to wash the wrist mount straps and replaceable pad when they become soiled.
Remove the straps and pad from the wrist mount. Hand wash in cold water with a mild detergent (such as
Woolite®). Do not use bleach. Air dry. Do not use a dryer.

Replaceable Pad

Strap

Figure 4-1 Wrist Mount Soft Goods

Arm Sleeve Cleaning Instructions

It may be necessary to wash the arm sleeve when it become soiled.

Hand wash in cold water with a mild detergent (such as Woolite®). Do not use bleach. Air dry. Do not use a dryer.

Removing the Screen Protector

NOTE Not using a screen protector on a wearable terminal with a touch screen can affect warranty coverage. To
purchase replacement protectors, contact your local account manager or Motorola, Inc. These include screen
protector installation instructions. Part number: KT-114032-01Ror KT-114032-02R Screen Protector 3/pk.

A screen protector is applied to the wearable terminal with touch screen. Motorola recommends using this to
minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays.

To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then carefully lift it off
the display.
Maintenance & Troubleshooting 4-3

Lift Screen
Protector
Corner

Figure 4-2 Removing the Screen Protector

CAUTION Do not use a sharp object to remove the protector. Doing so can damage the touch screen.

Battery Safety Guidelines

• The area in which the units are charged should be clear of debris and combustible materials or chemicals.
Particular care should be taken where the device is charged in a non commercial environment.
• Improper battery use may result in a fire, explosion, or other hazard.
• To charge the mobile device battery, the battery and charger temperatures must be between 0 ºC and +40 ºC
(+32 ºF and +104 ºF).
• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk
of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a
charger, contact Motorola Enterprise Mobility support.
• Do not disassemble or open, crush, bend or deform, puncture, or shred.
• Severe impact from dropping any battery-operated device on a hard surface could cause the battery to
overheat.
• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water
or other liquids, or expose to fire, explosion, or other hazard.
• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or
near a radiator or other heat source. Do not place battery into a microwave oven or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to promptly dispose of used re-chargeable batteries.
• Do not dispose of batteries in fire.
4-4 WT4090 Wearable Terminal User Guide

• Seek medical advice immediately if a battery has been swallowed.

• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has
been made, wash the affected area with large amounts of water and seek medical advice.
• If you suspect damage to your equipment or battery, contact Motorola Enterprise Mobility support to arrange
for inspection.

Cleaning

WARNING! Avoid exposing this product to contact with hot oil or other flammable liquids. If such exposure
occurs, unplug the device and clean the product immediately in accordance with these guidelines.

CAUTION Always wear eye protection.

Read warning label on compressed air and alcohol product before using.

If you have to use any other solution for medical reasons please contact Motorola for more information.

Materials Required
• Alcohol wipes
• Soft lens cloth
• Cotton tipped applicators
• Isopropyl alcohol
• Can of compressed air with a tube.

Cleaning the Wearable Terminal

Housing
Using the alcohol wipes, wipe the housing including keys and in-between keys.

Display
The display can be wiped down with the alcohol wipes, but care should be taken not to allow any pooling of liquid
around the edges of the display. Immediately dried the display with a soft, non-abrasive cloth to prevent streaking.
For WT4090 with touch panel, only use a soft lens cloth to clean the touch panel overlay surface.

Connectors
Clean all three connectors, two interface connectors on the sides of the wearable terminal and the cradle
connector on the back.

1. Remove the main battery from mobile computer. See Installing and Removing the Main Battery on page 1-7.

2. Remove connector rubber plugs, if required.

3. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
Maintenance & Troubleshooting 4-5

4. Rub the cotton portion of the cotton tipped applicator back-and-forth across each connector. Do not leave any
cotton residue on the connector.

5. Repeat at least three times.

6. Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.

7. Use a dry cotton tipped applicator and repeat steps 4 through 7.

8. Spray compressed air on the connector areas by pointing the tube/nozzle about ½ inch away from the surface.

CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.

9. Inspect the area for any grease or dirt, repeat if required.

10. Replace connector rubber plugs, if required.

Cleaning the RS309, RS409 and RS507

Housing
Using the alcohol wipes, wipe the housing including keys and in-between keys.

Scanner Exit Window

Wipe the scanner exit window periodically with a lens cloth or other material suitable for cleaning optical material
such as eyeglasses.

Connectors
1. Disconnect the scanner from mobile computer.

2. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
3. Rub the cotton portion of the cotton tipped applicator back-and-forth across the connector pins. Do not leave
any cotton residue on the connector.

4. Repeat at least three times.

5. Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.
6. Use a dry cotton tipped applicator and repeat steps 3 through 5.

7. Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the surface.

CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.

8. Inspect the area for any grease or dirt, repeat if required.

Cleaning Cradle Connectors

To clean the connectors on a cradle:

1. Remove the DC power cable from the cradle.

4-6 WT4090 Wearable Terminal User Guide

2. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.

3. Rub the cotton portion of the cotton tipped applicator along the pins of the connector. Slowly move the
applicator back-and-forth from one side of the connector to the other. Do not let any cotton residue on the
connector.

4. All sides of the connector should also be rubbed with the cotton tipped applicator.

CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.

5. Spray compressed air in the connector area by pointing the tube/nozzle about ½ inch away from the surface.

6. Ensure that there is no lint left by the cotton tipped applicator, remove lint if found.

7. If grease and other dirt can be found on other areas of the cradle, use lint free cloth and alcohol to remove.

CAUTION Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry
before applying power to cradle.

If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry
humidity requires less drying time.

Cleaning Frequency
The cleaning frequency is up to the customer’s discretion due to the varied environments in which the mobile
devices are used. They may be cleaned as frequently as required. However when used in dirty environments it
may be advisable to periodically clean the ring scanners’ exit windows to ensure optimum scanning performance.

Troubleshooting
Wearable Terminal

Table 4-1 Troubleshooting the Wearable Terminal

Problem Cause Solution

Wearable terminal Lithium-ion battery Charge or replace the lithium-ion battery in the wearable terminal.
does not turn on. not charged.

Lithium-ion battery Ensure battery is installed properly. See Installing and Removing
not installed the Main Battery on page 1-7.
properly.
System crash. Perform a warm boot. If the wearable terminal still does not turn on,
perform a cold boot. See Resetting the Wearable Terminal on page
2-17.
Maintenance & Troubleshooting 4-7

Table 4-1 Troubleshooting the Wearable Terminal (Continued)

Problem Cause Solution

Rechargeable Battery failed. Replace battery. If the wearable terminal still does not operate, try a
lithium-ion battery did warm boot, then a cold boot. See Resetting the Wearable Terminal
not charge. on page 2-17.

Wearable terminal Insert wearable terminal in cradle and begin charging. The standard
removed from capacity battery fully charges in less than four hours and the
cradle while battery extended capacity battery fully charges in less than eight hours.
was charging.

Ambient Move the cradle to an area where the ambient temperature is

temperature of the between 0 °C and 40 °C (32 °F and 104 °F).
cradle is too warm
or too cold.

Cannot see Wearable terminal Press the Power button.

characters on not powered on.
display.(not applicable
to voice only Screen protective is Replace screen protector.
configuration) scratched or hazy.

Display is hard to Screen protective is Replace screen protector.

read. (not applicable scratched or hazy.
to voice only
configuration)

During data Wearable terminal Replace the wearable terminal in the cradle, or reattach the
communication, no removed from Synchronization cable and re-transmit.
data was transmitted, cradle or unplugged
or transmitted data from host computer
was incomplete. during
communication.

Incorrect cable See the System Administrator.

configuration.
Communication Perform setup. Refer to the WT4090 Integrator Guide for details.
software was
incorrectly installed Ensure that Microsoft ActiveSync 4.5 or greater is installed on the
or configured. host computer.

No sound is audible. Volume setting is Adjust volume. Change volume settings by selecting Start > Settings
low or turned off. > Control Panel > Volume & Sounds icon > Volume tab.
Move the slider to change the volume level or use volume control on
voice application.
4-8 WT4090 Wearable Terminal User Guide

Table 4-1 Troubleshooting the Wearable Terminal (Continued)

Problem Cause Solution

Wearable terminal Wearable terminal The wearable terminal turns off after a period of inactivity. If the
turns itself off. is inactive. wearable terminal is running on battery power, this period can be
set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes. If the wearable terminal is
running on external power, this period can be set to 1, 2, 3, 5, 10, 15
and 30 minutes.
Check the power settings by selecting Start > Settings > Control
Panel > Power icon > Power Off tab.
Change the setting if you need a longer delay before the automatic
shutoff feature activates.
Voice Only WT4090 Return Voice Only WT4090 suspend setting to factory default
was set to suspend. (disabled).

Battery is depleted. Replace or recharge the battery.

Battery is not Insert the battery properly (see Installing and Removing the Main
inserted properly. Battery on page 1-7).

The wearable Replace or recharge the battery.

terminal’s battery is
low and it powers
down to protect
memory content.

A message appears Too many files Delete unused memos and records. You can save these records on
stating that the stored on the the host computer.
wearable terminal wearable terminal.
memory is full.(not
applicable to voice Too many If you have installed additional applications on the wearable
only configuration) applications terminal, remove them to recover memory.
installed on the Select Start > Settings > Control Panel > Remove Programs icon.
wearable terminal. Select the unused program and select Remove.
Maintenance & Troubleshooting 4-9

Table 4-1 Troubleshooting the Wearable Terminal (Continued)

Problem Cause Solution

The wearable Scanning Verify that the unit is loaded with a scanning application. See the
terminal does not application is not System Administrator.
accept scan input. loaded.

Unreadable bar Ensure the symbol is not defaced.

code.

Distance between Ensure wearable terminal is within proper scanning range.

exit window and bar
code is incorrect.

Wearable terminal Ensure the wearable terminal is programmed to accept the type of
is not programmed bar code being scanned.
for the bar code.

Wearable terminal If a beep on a good decode is expected and a beep is not heard,
is not programmed check that the application is set to generate a beep on good decode.
to generate a beep.

Battery is low. If the scanner stops emitting a laser beam when the trigger is
pressed, check the battery level. When the battery is low, the
scanner shuts off before the wearable terminal low battery condition
notification.
Note: If the scanner is still not reading symbols, contact the
distributor or Motorola.

Wearable terminal Headset adapter Disconnect the headset adapter prior to performing a cold boot.
goes into IPL mode without a headset is Update to a newer operating system (OEM version 05.30.0000 or
after cold boot. connected to the higher).
wearable terminal
during a cold boot.
Scanner trigger is Do not press trigger during a cold boot.
held down during a
cold boot.

P1 or P2 key is held Do not press the P1 or P2 key during a cold boot.

down during a cold
boot.

If all three LEDs are lit Voice Only WT4090 Perform cold boot. See Resetting the Wearable Terminal on page
solid. is in IPL mode. 2-17.

WLAN connection is Microsoft security Disconnect from the WLAN network prior to connecting to a host
lost when the feature prevents computer using ActiveSync.
wearable terminal is connection to two
connected to a host separate networks.
computer using
ActiveSync.
4 - 10 WT4090 Wearable Terminal User Guide

Table 4-1 Troubleshooting the Wearable Terminal (Continued)

Problem Cause Solution

Wearable terminal Too far from other Move closer to the other Bluetooth device(s), within a range of 10
cannot find any Bluetooth devices. meters.
Bluetooth devices
nearby. The Bluetooth Turn on the Bluetooth device(s) you wish to find.
device(s) nearby
are not turned on.

The Bluetooth Set the Bluetooth device(s) to discoverable mode. If needed, refer to
device(s) are not in the device’s user documentation for help.
discoverable mode.
Maintenance & Troubleshooting 4 - 11

Four Slot Ethernet Cradle

Table 4-2 Troubleshooting the Four Slot Ethernet Cradle

Problem Cause Solution

Wearable terminal amber Cradle is not receiving power. Ensure the power cable is connected
Charge Status LED does not securely to both the cradle and to AC power.
light when wearable terminal
inserted. Wearable terminal is not Remove and re-insert the wearable terminal
correctly seated. into the cradle, ensuring it is correctly seated.

Wearable terminal battery is Wearable terminal was Ensure cradle is receiving power. Ensure the
not charging. removed from cradle or cradle wearable terminal is seated correctly. If the
was unplugged from AC power wearable terminal battery is fully depleted, it
too soon. can take up to four hours to fully recharge a
standard capacity battery and it can take up
to eight hours to fully recharge an extended
capacity battery.

Battery is faulty. Verify that other batteries charge properly. If

so, replace the faulty battery.

The wearable terminal is not Remove and re-insert the wearable terminal
fully seated in the cradle. into the cradle, ensuring it is correctly seated.

Ambient temperature of the Move the cradle to an area where the

cradle is too warm or too cold. ambient temperature is between 0 °C and 40
°C (32 °F and 104 °F).

During data communication, Wearable terminal removed Replace wearable terminal in cradle and
no data was transmitted, or from cradle during retransmit.
transmitted data was communication.
incomplete.
Incorrect cable configuration. See the system administrator or refer to the
WT4090 Integrator Guide.

Ethernet connection error. Link See the system administrator. Probable

LED is not lit (see Link LED on Ethernet connection error.
page 3-5).

Wearable terminal’s main Ambient temperature of the Move the cradle to an area where the
batteries not charging. cradle is too warm or too cold. ambient temperature is between 0 °C and 40
°C (32 °F and 104 °F).
4 - 12 WT4090 Wearable Terminal User Guide

Four Slot Spare Battery Charger

Table 4-3 Troubleshooting The Four Slot Spare Battery Charger

Symptom Possible Cause Solution

Batteries not Battery was removed Re-insert the battery in the charger or re-connect the charger’s
charging. from the charger or power supply.
charger was unplugged
from AC power too
soon.

Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.

Battery contacts not Verify that the battery is oriented properly and firmly seated in the
connected to charger. battery well correctly with the contacts facing down. See Figure
3-3 on page 3-6 for proper battery orientation.

Ambient temperature of Move the charger to an area where the ambient temperature is
the charger is too warm between 0 °C and 40 °C (32 °F and 104 °F).
or too cold.
Maintenance & Troubleshooting 4 - 13

Single Slot USB Cradle

Table 4-4 Troubleshooting the Single Slot USB Cradle

Symptom Possible Cause Solution

Charge Status Cradle is not receiving Ensure the power cable is connected securely to both the cradle
LEDs do not light power. and to AC power.
when wearable
terminal or spare Wearable terminal is Remove and re-insert the wearable terminal into the cradle,
battery is not seated firmly in the ensuring it is firmly seated.
inserted. cradle.

Spare battery is not Remove and re-insert the spare battery into the charging slot,
seated firmly in the ensuring it is firmly seated.
cradle.

Wearable Wearable terminal was Ensure cradle is receiving power. Ensure wearable terminal is
terminal battery removed from cradle or seated correctly. Confirm main battery is charging. If a wearable
is not charging. cradle was unplugged terminal battery is fully depleted, it can take up to four hours to
from AC power too fully recharge a standard capacity battery and up to eight hours for
soon. an extended capacity battery (if the wearable terminal is off, and
longer if the wearable terminal is operating).
View battery status by selecting Start > Settings > Control Panel >
Power icon.

Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.

The wearable terminal Remove and re-insert the wearable terminal into the cradle,
is not fully seated in ensuring it is firmly seated.
the cradle.

Ambient temperature Move the cradle to an area where the ambient temperature is
of the cradle is too between 0°C and 40°C (32°F and 104°F).
warm or too cold.

Spare battery is Battery inserted Verify that the battery is oriented properly and firmly seated in the
not charging. incorrectly. battery well correctly with the contacts facing down. See Figure
3-3 on page 3-6 for proper battery orientation.

Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
Ambient temperature Move the cradle to an area where the ambient temperature is
of the cradle is too between 0 °C and 40 °C (32 °F and 104 °F).
warm or too cold.
4 - 14 WT4090 Wearable Terminal User Guide

Table 4-4 Troubleshooting the Single Slot USB Cradle (Continued)

Symptom Possible Cause Solution

During data Wearable terminal Replace wearable terminal in cradle and retransmit.
communications, removed from cradle
no data was during
transmitted, or communications.
transmitted data
was incomplete. Incorrect cable See the System Administrator.
configuration.

Communications Perform setup as described in the WT4090 Integrator Guide.

software is not
installed or configured Ensure that Microsoft ActiveSync 4.1 or greater is installed on the
properly. host computer.

Cannot Wrong USB cable Ensure that the cable has a USB A connector on one end and a
ActiveSync with used. USB mini B connector on the other end.
Host Computer
Host computer not Ensure that ActiveSync on the host computer is set to allow USB
configured properly. connections.

The wearable terminal Remove and re-insert the wearable terminal into the cradle,
is not fully seated in ensuring it is firmly seated.
the cradle.
Appendix A Specifications

Technical Specifications
The following tables summarize the wearable terminal’s intended operating environment and general technical
hardware specifications.

Wearable Terminal
The following table summarizes the wearable terminal’s intended operating environment.

Table A-1 Technical Specifications

Item Description
Physical and Environmental Characteristics
Dimensions With standard battery: 5.7 inches L x 3.7 inches W x 1.0 inch H (14.2 cm L x 9.3
cm W x 2.6 cm H)
With extended battery: 5.7 inches L x 4.2 inches W x 1.0 inch H (14.2 cm W x 10.7
cm H x 2.6 cm D)
Weight With standard battery: 11.3 oz. (320 g)
With extended battery: 12.2 oz. (345 g).
Keyboard WT4070/90: Two-color Alphanumeric Keypad or Triple-tap Alphanumeric
Keypad
Voice Only WT4090: Three programmable function keys
Display WT4090: Color 2.8 inch QVGA non-touch or touch screens
Voice Only WT4090: None
Main Battery Removable, rechargeable 3.7 VDC Lithium Ion battery.
Standard capacity: 2330 mAh (minimum)
Extended capacity: 4600 mAh (minimum)
Backup Battery Two NiMH batteries (rechargeable) 15 mAh 2.4 VDC (not user accessible)
Performance Characteristics
CPU XScale PXA270 processor at 520 MHz
A-2 WT4090 Wearable Terminal User Guide

Table A-1 Technical Specifications (Continued)

Item Description
Operating System Microsoft Windows CE 5.0 Professional
Memory WT4070/90: 64 MB Flash/128 MB RAM or 128 MB Flash/128 MB RAM
Voice Only WT4090: 128 MB Flash/128 MB RAM
Application Development PSDK, DCP and SMDK available through Symbol Developer Zone web site
Data Capture Options RS309 scanner
RS409 scanner
RS507 Hands-free imager
User Environment
Operating Temperature -4 °F to 122°F (-20 °C to 50 °C)
Storage Temperature -40 °F to 158 °F (-40 °C to 70 °C)
Battery Charging Temperature 32 °F to 104 °F (0 °C to +40 °C) ambient temperature range.
Humidity 5% to 95% non condensing
Drop Specification Multiple 4 ft.(1.2 m) drops to concrete across operating temperature range
Tumble 500 half-meter tumbles at room temperature (1,000 drops)
Environmental Sealing IP54 Category 2
ESD ± 15k VDC air discharge
± 8k VDC direct discharge
± 8k VDC indirect discharge
WLAN Wireless Data Communications
WLAN radio WT4070: Symbol 802.11b/g
WT4090: Symbol 802.11a/b/g
Operating Channels Channel 8 - 169 (5040 - 5845 MHz) (4920 - 4980 MHz) Japan only
Channel 1 - 13 (2412 - 2472 MHz)
Channel 14 (2484 MHz) Japan only
Actual operating frequencies depend on regulatory rules and certification agency
Security WPA2, WEP (40 or 128 bit), TKIP, TLS, TTLS (MS-CHAP), TTLS (MS-CHAP v2),
TTLS (CHAP), TTLS-MD5, TTLS-PAP, PEAP-TLS, PEAP (MS-CHAP v2), AES,
LEAP, CCX v3
Voice Communication Runs voice recognition engines and text-to-speech engines for voice picking
applications
Output Power 100 mW U.S. and International
Data Rate 802.11a: up to 54Mb per second
802.11b: up to 11Mb per second
802.11g: up to 54Mb per second
Frequency Range 802.11a: 5 GHz; country-dependent
802.11b: 2.4 GHz; country-dependent
802.11g: 2.4 GHz; country-dependent
Specifications A-3

Table A-1 Technical Specifications (Continued)

Item Description
Antenna Internal
WPAN Wireless Data Communications
Bluetooth Bluetooth Version 1.2
Peripherals and Accessories
Cradles Single Slot USB
Four Slot Ethernet
Printers Supports extensive line of Symbol approved printers, cables and accessories
Charger Four Slot Battery Charger
Other Accessories Headset adapter, freezer pouch, hip mount and wrist mount.
Regulatory
Electrical Safety Certified to UL60950-1, CSA C22.2 No. 60950-1, EN60950/IEC 60950-1 plus all
national deviations
EMC FCC Part 15 Subpart B, ICES-003 Class B, EN 60601-1-2, EN 61000-3-2, EN
61000-3-3, CISPR 22 Class B, CISPR 24
RF FCC Parts 15.247, 15.407, 15.205, 15.207, 15.209, 15.203, EN 300 32, EN301
893, RSS-100, RSS-210, ARIB STD-66 & 33, ARIB STD-T70 & 71

RS309 Scanner

Table A-2 RS309 Technical Specifications

Item Description
Physical and Environmental Characteristics
Dimensions (standard version 2.7 inch L x 2.4 inch W x 1.5 inch H
without cables attached) (6.8 cm L x 6.1 cm H x 3.8 cm)
Weight (standard version without 3.525 oz. (98 gm)
cables attached)
Current 140 mA typical, 180 mA max
Standby Current 60 µA max
Voltage 3.1 to 3.6 VDC
Vcc Noise Level 200 mV p-p max.
Performance Characteristics
Light Source 650 nm LASER, 1.06 mW
Scan Rate 35 (± 5) scans/sec (bidirectional)
A-4 WT4090 Wearable Terminal User Guide

Table A-2 RS309 Technical Specifications (Continued)

Item Description
Nominal Working Distance Density 5 mil 7.5 mil 13 mil 20 mil 55 mil
Code Type 39 39 UPC 39 39
Far (inches) 7 9.75 20.25 29.25 54.5 (Guaranteed)
Far (inches) 9.5 15.25 27.25 42.5 84.75 (Typical)
Yaw ± 50 degrees from normal
Roll ± 20 degrees from vertical
Pitch ± 65 degrees from normal
User Environment
Operating Temperature -22 °F to 122 °F (-30 °C to 50 °C)
Storage Temperature -40 °F to 140 °F (-40 °C to 60 °C)
Humidity 5% to 95% non condensing
Drop Specification 4 ft.(1.8m) drop to concrete
Environmental Sealing IP54 sealing
Ambient Light Immunity Indoor: 450 foot-candles (4,844 lux)
Outdoor: 8,000 foot-candles (86,111 lux)
Regulatory
Electrical Safety Certified to CSA C22.2 No. 60950-1, EN60950-1, IEC 60950-1
EMI/RFI FCC Part 15 Class B, ICES-003 Class B, European Union EMC and R&TTE
Directives, Australian AS/NZS 4268
Laser Safety CDRH Class II, IEC 60825-1 Class 2
Laser Decode Capability Code 39 Code 128 Code 93
Codabar Code 11 Discrete 2 of 5
Interleaved 2 of 5 EAN-8 EAN-13
MSI UPCA UPCE
UPC/EAN supplementals Coupon Code Trioptic 39
Webcode Chinese 2 of 5 RSS

RS409 Scanner

Table A-3 RS409 Technical Specifications

Item Description
Physical and Environmental Characteristics
Dimensions 1.9 in. L x 1.4 in. W x 1.9 in. H
(4.8 cm L x 3.6 cm H x 4.8 cm H)
Weight (standard version 2.0 oz. (56.7 gm)
without cables attached)
Specifications A-5

Table A-3 RS409 Technical Specifications (Continued)

Item Description
Current 92 mA typical, 121 mA max
Standby Current 12µA typical/60 µA max
Voltage 3.1 to 3.6 VDC
Vcc Noise Level 100 mV p-p max.
Performance Characteristics
Light Source 650 nm LASER, 1.55 mW
Scan Rate 104 (± 12) scans/sec (bidirectional)
Nominal Working Density 5 mil 7.5 mil 10 mil 13 mil 20 mil 40 mil 55 mil
Distance Code Type 39 39 39 UPC 39 39 39
Far (inches) 4.75 8.75 13.25 17.25 21.5 22.25 27 (Guaranteed)
Far (inches) 8.75 14.25 24.25 35.75 50.5 (Typical)
Yaw ± 50 degrees from normal
Roll ± 35 degrees from vertical
Pitch ± 65 degrees from normal
User Environment
Operating Temperature -4 °F to 122 °F (-20 °C to 50 °C)
Storage Temperature -25 °F to 160 °F (-40 °C to 70 °C)
Humidity 5% to 95% non condensing
Drop Specification 4 ft.(1.8m) drop to concrete
Environmental Sealing IP54 sealing
Ambient Light Immunity Indoor: 450 foot-candles (4,844 lux)
Outdoor: 8,000 foot-candles (86,111 lux)
Regulatory
Electrical Safety Certified to CSA C22.2 No. 60950-1, EN60950-1, IEC 60950-1
EMI/RFI FCC Part 15 Class B, ICES-003 Class B, European Union EMC and R&TTE
Directives, Australian AS/NZS 4268
Laser Safety CDRH Class II, IEC 60825-1 Class 2
Laser Decode Capability Code 39 Code 128 Code 93
Codabar Code 11 Discrete 2 of 5
Interleaved 2 of 5 EAN-8 EAN-13
MSI UPCA UPCE
UPC/EAN supplementals Coupon Code Trioptic 39
Webcode Chinese 2 of 5 RSS
A-6 WT4090 Wearable Terminal User Guide

RS507 Scanner

Table A-4 RS507 Technical Specifications

Item Description
Physical and Environmental Characteristics
Dimensions Triggerless, standard battery: 2.9 x 5.3 x 7.4 cm (1.16 x 2.1 x 2.92 in.)
Triggerless, extended battery: 3.6 x 5.3 x 7.4 cm (1.42 x 2.1 x 2.92 in.)
Triggered, standard battery: 2.9 x 5.3 x 7.4 cm (1.16 x 2.1 x 2.92 in.)
Triggered, corded (cord length not included): 3.3 x 5.3 x 7.4 cm (1.3 x 2.1 x 2.92 in.)
Weight (standard version Triggerless, standard battery: 121.4 g (4.3 oz.)
without cables attached) Triggerless, extended battery: 146.4 g (5.2 oz.)
Triggered, standard battery: 134.8 g (4.8 oz.)
Triggered, corded: 140.8 g (5.0 oz.)
Performance Characteristics
Optical Resolution WVGA 752 H x 480 V pixels (gray scale)
Skew ± 60° from normal
Roll 360°
Pitch ± 60° from normal
Aiming Element 655 nm ± 10 nm Visible Laser Diode
Illumination Element 637 nm ± 5 nm Red LEDs
Field of View Horizontal: 39.6°; Vertical: 25.7°
Nominal Working Density 5 mil 7.5 mil 20 mil 13 mil
Distance 1D Code Type 39 39 39 UPC
Near 2” 1.5”
Far 7.4” 10.5” 24.6” 15.4”

Density 6.67 mil 10 mil 15 mil

2D Code Type PDF417 PDF417 PDF417
Near 3.3”
Far 7.0” 10” 14.6”
Ambient Light Immunity From total darkness
Indoor: 450 ft. candles (4,845 lux).
Outdoor: 9,000 ft. candles (96,900 lux).
Motion Tolerance 63.5 cm (25 inches) per second, typical.
Specifications A-7

Table A-4 RS507 Technical Specifications (Continued)

Item Description
Supported Symbologies 1D enabled by default:
Codabar, Code 39, Code 128, EAN-13, EAN-8, Interleaved 2 of 5, UPC-A and
UPC-E.

Additionally supported by 1D:

Code 11, Code 32 Pharmaceutical (PARAF), Code 93, MSI, Reduced Space
Symbology (RSS-14, RSS Limited, RSS Expanded), Straight 2 of 5 IATA (two-bar
start/stop), Straight 2 of 5 Industrial (three-bar start/stop), Trioptic, UPC-E1.

2D enabled by default:
4-CB (4-State Customer Bar code), Aztec, MicroPDF417, PDF417, MaxiCode.

Additionally supported by 2D:

Australian Post, British Post (4 state code and “infomail”), Data Matrix, Japanese
Post, KIX (Netherlands) Post, Planet Code, Postnet, QR Code, EAN/UCC
Composite, TCIF Linked Code 39 (TLC39).
Supported Aiming Modes Class 2 Laser, cross hair with bright center for sunlight visibility; Pick List mode
option.
Interface Cordless:
Bluetooth: Class II, v 2.1 with Adaptive Frequency Hopping (AFH).
Supported profiles: Serial Port Profile (SPP), Human Interface Device Profile (HID),
Service Discovery Application Profile (SDAP).
Pairing: by reading terminal BT address as bar code off the display or from a printed
label.

Corded (to WT4090): Serial.

Field Replaceable Parts Batteries, corded adaptor, trigger clamp, triggerless clamp, comfort pad, straps and
strap buckle.
User Interface
LED Two (parallel), multi color, rear left and rear right.
Beeper Rear center, up to 80 dBA SPL @ 10 cm.
Restore Key User accessible for emergency boot up and Bluetooth reconnect (after excessive
disconnection period).
Scan Triggering Manual or automatic using Interactive Sensing Technology (IST).
User Environment
Operating Temperature -20 °C to 55 °C (-4 °F to 131 °F)
Storage Temperature -40° to 70° C (-40° to 158° F) excluding battery
-40° to 60° C (-40° to 140° F) including battery
Humidity 5% to 85% non condensing
Drop Specification 1.8 m (6 ft.) multiple drops to concrete across operating temperature range.
A-8 WT4090 Wearable Terminal User Guide

Table A-4 RS507 Technical Specifications (Continued)

Item Description
Environmental Sealing IP54
Electrostatic Discharge ±15kV air discharge, ±8kV direct discharge.
(ESD)
Power
Cordless Standard battery: Li-Ion 970 mAh, 3.7 V with up to 35,000 scans (continuous) or up
to 10 hours with 900 scans per hour on a single charge using fresh batteries.
Extended battery: Li-Ion 1940 mAh, 3.7 V with up to 70,000 scans (continuous) or up
to 20 hours with 900 scans per hour on a single charge using fresh batteries.
Corded Corded adaptor to WT4090.
Regulatory
Electrical Safety Certified to UL60950-1, CSA C22.2 No. 60950-1, EN60950-1, IEC 60950-1.
EMI/RFI FCC Part 15 Class B, ICES-003 Class B, European Union EMC and R&TTE
Directives, Australian AS/NZS 60950.1
Laser Safety CDRH Class II, IEC 60825-1 Class 2
RoHS Compliance with RoHS standards.

Accessories

Table A-5 Accessory Specifications

Four Slot Spare Battery

Single Slot USB Cradle Four Slot Ethernet Cradle
Charger

Operating 32 °F to 122 °F 32 °F to 104 °F

Temperature (0 °C to +50 °C) (0 °C to +40 °C)

Storage -40 °F to 158 °F

Temperature (-40 °C to 70 °C)

Battery 32 °F to 104 °F
Charging (0 °C to +40 °C) ambient temperature
Temperature

Humidity 5% to 95% non-condensing

Size (L x W x H) 6.6 in. x 5.1 in. x 3.9 in. 6.7 in. x 18.9 in. x 4.5 in. 8.5 in. x 5.7 in. x 1.9 in.
(16.8 cm x 13.0 cm x 9.9 cm) (17.0 cm x 48.1 cm x 11.4 cm) (21.5 cm x 14.5 cm x 4.9 cm)
Weight 12.1 oz. (344 gm) 45.9 oz. (1300 gm) 15.3 oz. (435 gm)

Power Supply 12 VDC, 3.3 A 12 VDC, 9 A 12 VDC, 3.3 A

Specifications A-9

Table A-5 Accessory Specifications

Single Slot USB Cradle Four Slot Ethernet Cradle Four Slot Spare Battery
Charger

Drop 30 inches (76.2 cm) to vinyl covered concrete

Electrostatic ±15 kV air discharge, ± 8 kV contact discharge
Discharge
(ESD)

Typical Power 20 W 60 W 25 W
A - 10 WT4090 Wearable Terminal User Guide
Appendix B Regulatory Information

Introduction
This appendix contains the accessory power supply regulatory compliance statements.

Accessory Power Supply Regulatory Compliance

Table B-1 Accessory Power Supplies, Regulatory Compliance Statements

Accessory Power Supplies Regulatory Compliance Statements

Single Slot USB Cradle Power Use only a Symbol-approved power supply output rated 12 VDC and minimum
Supply 3.3 A. The power supply is certified to EN60950 with SELV outputs. Use of
Four Slot Battery Charger Power alternative power supply will invalidate any approval given to this device and
Supply may be dangerous.

Benutzen Sie nur eine von Symbol Technologies genehmigte Stromversorgung

mit einer Ausgangsleistung von 12 V (Gleichstrom) und mindestens 3.3 A. Die
Stromversorgung ist nach EN60950 für die Verwendung in SELV-Stromkreisen
zertifiziert. Bei Verwendung eines anderen Netzteils werden alle für das Gerät
gewährten Genehmigungen außer Kraft gesetzt, und der Betrieb kann
gefährlich sein.
Four Slot Ethernet Cradle Power Use only a Symbol-approved power supply output rated 12 VDC and minimum
Supply 9 A. The power supply is certified to EN60950 with SELV outputs. Use of
alternative power supply will invalidate any approval given to this device and
may be dangerous.

Benutzen Sie nur eine von Symbol Technologies genehmigte Stromversorgung

mit einer Ausgangsleistung von 12 V (Gleichstrom) und mindestens 9 A. Die
Stromversorgung ist nach EN60950 für die Verwendung in SELV-Stromkreisen
zertifiziert. Bei Verwendung eines anderen Netzteils werden alle für das Gerät
gewährten Genehmigungen außer Kraft gesetzt, und der Betrieb kann
gefährlich sein.
B-2 WT4090 Wearable Terminal User Guide
Glossary

A
API. An interface by means of which one software component communicates with or controls another. Usually used to refer
to services provided by one software component to another, usually via software interrupts or function calls

Application Programming Interface. See API.

ANSI Terminal. A display terminal that follows commands in the ANSI standard terminal language. For example, it uses
escape sequences to control the cursor, clear the screen and set colors. Communications programs support the ANSI
terminal mode and often default to this terminal emulation for dial-up connections to online services.

ASCII. American Standard Code for Information Interchange. A 7 bit-plus-parity code representing 128 letters, numerals,
punctuation marks and control characters. It is a standard data transmission code in the U.S.

B
Bar. The dark element in a printed bar code symbol.

Bar Code. A pattern of variable-width bars and spaces which represents numeric or alphanumeric data in machine-readable
form. The general format of a bar code symbol consists of a leading margin, start character, data or message character,
check character (if any), stop character, and trailing margin. Within this framework, each recognizable symbology uses
its own unique format. See Symbology.

Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data.
The pattern of 0 and 1 values within the byte determines its meaning.

Bits per Second (bps). Bits transmitted or received.

Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data.
The pattern of 0 and 1 values within the byte determines its meaning.

bps. See Bits Per Second.

Glossary - 2 WT4090 Wearable Terminal User Guide

Byte. On an addressable boundary, eight adjacent binary digits (0 and 1) combined in a pattern to represent a specific
character or numeric value. Bits are numbered from the right, 0 through 7, with bit 0 the low-order bit. One byte in
memory is used to store one ASCII character.

boot or boot-up. The process a computer goes through when it starts. During boot-up, the computer can run self-diagnostic
tests and configure hardware and software.

C
CDRH. Center for Devices and Radiological Health. A federal agency responsible for regulating laser product safety. This
agency specifies various laser operation classes based on power output during operation.

CDRH Class 1. This is the lowest power CDRH laser classification. This class is considered intrinsically safe, even if all laser
output were directed into the eye's pupil. There are no special operating procedures for this class.

CDRH Class 2. No additional software mechanisms are needed to conform to this limit. Laser operation in this class poses
no danger for unintentional direct human exposure.

Character. A pattern of bars and spaces which either directly represents data or indicates a control function, such as a
number, letter, punctuation mark, or communications control contained in a message.

Codabar. A discrete self-checking code with a character set consisting of digits 0 to 9 and six additional characters: (-$:/,+).

Code 128. A high density symbology which allows the controller to encode all 128 ASCII characters without adding extra
symbol elements.

Code 3 of 9 (Code 39). A versatile and widely used alphanumeric bar code symbology with a set of 43 character types,
including all uppercase letters, numerals from 0 to 9 and 7 special characters (space, minus (-), plus (+), period (.), dollar
sign ($), slash (/), and percent (%)). The code name is derived from the fact that 3 of 9 elements representing a character
are wide, while the remaining 6 are narrow.

Code 93. An industrial symbology compatible with Code 39 but offering a full character ASCII set and a higher coding
density than Code 39.

Cold Boot. A cold boot restarts the wearable terminal and erases all user stored records and entries.

COM port. Communication port; ports are identified by number, e.g., COM1, COM2.

Cradle. A cradle is used for charging the terminal battery and for communicating with a host computer, and provides a
storage place for the terminal when not in use.

D
DCP. See Device Configuration Package.

Decode. To recognize a bar code symbology (e.g., UPC/EAN) and then analyze the content of the specific bar code
scanned.
Glossary - 3

Decode Algorithm. A decoding scheme that converts pulse widths into data representation of the letters or numbers
encoded within a bar code symbol.

Decryption. Decryption is the decoding and unscrambling of received encrypted data. Also see, Encryption and Key.

Depth of Field. The range between minimum and maximum distances at which a scanner can read a symbol with a certain
minimum element width.

Device Configuration Package. The Symbol Device Configuration Package provides the Product Reference Guide (PRG),
flash partitions, Terminal Configuration Manager (TCM) and the associated TCM scripts. With this package hex images
that represent flash partitions can be created and downloaded to the wearable terminal.

Discrete 2 of 5. A binary bar code symbology representing each character by a group of five bars, two of which are wide.
The location of wide bars in the group determines which character is encoded; spaces are insignificant. Only numeric
characters (0 to 9) and START/STOP characters may be encoded.

E
EAN. European Article Number. This European/International version of the UPC provides its own coding format and
symbology standards. Element dimensions are specified metrically. EAN is used primarily in retail.

ENQ (RS-232). ENQ software handshaking is also supported for the data sent to the host.

ESD. Electro-Static Discharge

F
Flash Disk. An additional megabyte of non-volatile memory for storing application and configuration files.

Flash Memory. Flash memory is nonvolatile, semi-permanent storage that can be electronically erased in the circuit and
reprogrammed. Wearable terminals use Flash memory to store the operating system (ROM-DOS), the terminal
emulators, and the Citrix ICA Client for DOS.

File Transfer Protocol (FTP). A TCP/IP application protocol governing file transfer via network or telephone lines. See
TCP/IP.

FTP. See File Transfer Protocol.

Flash Memory. Flash memory is responsible for storing the system firmware and is non-volatile. If the system power is
interrupted the data is not be lost.

H
Hard Reset. See Cold Boot.

Hz. Hertz; A unit of frequency equal to one cycle per second.

Glossary - 4 WT4090 Wearable Terminal User Guide

Host Computer. A computer that serves other terminals in a network, providing such services as computation, database
access, supervisory programs and network control.

I
IEC. International Electrotechnical Commission. This international agency regulates laser safety by specifying various laser
operation classes based on power output during operation.

IEC (825) Class 1. This is the lowest power IEC laser classification. Conformity is ensured through a software restriction of
120 seconds of laser operation within any 1000 second window and an automatic laser shutdown if the scanner's
oscillating mirror fails.

IEEE Address. See MAC Address.

Interleaved 2 of 5. A binary bar code symbology representing character pairs in groups of five bars and five interleaved
spaces. Interleaving provides for greater information density. The location of wide elements (bar/spaces) within each
group determines which characters are encoded. This continuous code type uses no intercharacter spaces. Only
numeric (0 to 9) and START/STOP characters may be encoded.

IOCTL. Input/Output Control.

Interleaved Bar Code. A bar code in which characters are paired together, using bars to represent the first character and
the intervening spaces to represent the second.

Internet Protocol Address. See IP.

I/O Ports. interface The connection between two devices, defined by common physical characteristics, signal
characteristics, and signal meanings. Types of interfaces include RS-232 and PCMCIA.

Input/Output Ports. I/O ports are primarily dedicated to passing information into or out of the terminal’s memory. Wearable
terminals include Serial and USB ports.

IP. Internet Protocol. The IP part of the TCP/IP communications protocol. IP implements the network layer (layer 3) of the
protocol, which contains a network address and is used to route a message to a different network or subnetwork. IP
accepts “packets” from the layer 4 transport protocol (TCP or UDP), adds its own header to it and delivers a “datagram”
to the layer 2 data link protocol. It may also break the packet into fragments to support the maximum transmission unit
(MTU) of the network.

IP Address. (Internet Protocol address) The address of a computer attached to an IP network. Every client and server
station must have a unique IP address. A 32-bit address used by a computer on a IP network. Client workstations have
either a permanent address or one that is dynamically assigned to them each session. IP addresses are written as four
sets of numbers separated by periods; for example, 204.171.64.2.

IPX/SPX. Internet Package Exchange/Sequential Packet Exchange. A communications protocol for Novell. IPX is Novell’s
Layer 3 protocol, similar to XNS and IP, and used in NetWare networks. SPX is Novell's version of the Xerox SPP
protocol.
Glossary - 5

IS-95. Interim Standard 95. The EIA/TIA standard that governs the operation of CDMA cellular service. Versions include
IS-95A and IS-95B. See CDMA.

K
Key. A key is the specific code used by the algorithm to encrypt or decrypt the data. Also see, Encryption and Decrypting.

L
laser scanner. A type of bar code reader that uses a beam of laser light.

LASER. Light Amplification by Stimulated Emission of Radiation.The laser is an intense light source. Light from a laser is
all the same frequency, unlike the output of an incandescent bulb. Laser light is typically coherent and has a high energy
density.

LCD. See Liquid Crystal Display.

LED Indicator. A semiconductor diode (LED - Light Emitting Diode) used as an indicator, often in digital displays. The
semiconductor uses applied voltage to produce light of a certain frequency determined by the semiconductor's particular
chemical composition.

Liquid Crystal Display (LCD). A display that uses liquid crystal sealed between two glass plates. The crystals are excited
by precise electrical charges, causing them to reflect light outside according to their bias. They use little electricity and
react relatively quickly. They require external light to reflect their information to the user.

Light Emitting Diode. See LED.

M
MDN. Mobile Directory Number. The directory listing telephone number that is dialed (generally using POTS) to reach a
mobile unit. The MDN is usually associated with a MIN in a cellular telephone -- in the US and Canada, the MDN and
MIN are the same value for voice cellular users. International roaming considerations often result in the MDN being
different from the MIN.

MIL. 1 mil = 1 thousandth of an inch.

MIN. Mobile Identification Number. The unique account number associated with a cellular device. It is broadcast by the
cellular device when accessing the cellular system.

N
Nominal. The exact (or ideal) intended value for a specified parameter. Tolerances are specified as positive and negative
deviations from this value.
Glossary - 6 WT4090 Wearable Terminal User Guide

O
Open Data-Link Interface (ODI). Novell’s driver specification for an interface between network hardware and higher-level
protocols. It supports multiple protocols on a single NIC (Network Interface Controller). It is capable of understanding
and translating any network information or request sent by any other ODI-compatible protocol into something a NetWare
client can understand and process.

Open System Authentication. Open System authentication is a null authentication algorithm.

P
PAN . Personal area network. Using Bluetooth wireless technology, PANs enable devices to communicate wirelessly.
Generally, a wireless PAN consists of a dynamic group of less than 255 devices that communicate within about a 33-foot
range. Only devices within this limited area typically participate in the network.

Parameter. A variable that can have different values assigned to it.

PING. (Packet Internet Groper) An Internet utility used to determine whether a particular IP address is online. It is used to
test and debug a network by sending out a packet and waiting for a response.

Print Contrast Signal (PCS). Measurement of the contrast (brightness difference) between the bars and spaces of a
symbol. A minimum PCS value is needed for a bar code symbol to be scannable. PCS = (RL - RD) / RL, where RL is
the reflectance factor of the background and RD the reflectance factor of the dark bars.

Q
QWERTY. A standard keyboard commonly used on North American and some European PC keyboards. “QWERTY” refers
to the arrangement of keys on the left side of the third row of keys.

R
RAM. Random Access Memory. Data in RAM can be accessed in random order, and quickly written and read.

Resolution. The narrowest element dimension which is distinguished by a particular reading device or printed with a
particular device or method.

RF. Radio Frequency.

ROM. Read-Only Memory. Data stored in ROM cannot be changed or removed.

Router. A device that connects networks and supports the required protocols for packet filtering. Routers are typically used
to extend the range of cabling and to organize the topology of a network into subnets. See Subnet.
Glossary - 7

RS-232. An Electronic Industries Association (EIA) standard that defines the connector, connector pins, and signals used to
transfer data serially from one device to another.

S
Scan Area. Area intended to contain a symbol.

Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars
and spaces of the symbol. Its three main components are:
1. Light source (laser or photoelectric cell) - illuminates a bar code.
2. Photodetector - registers the difference in reflected light (more light reflected from spaces).
3. Signal conditioning circuit - transforms optical detector output into a digitized bar pattern.

SDK. Software Development Kit

Secure Sockets Layer (SSL). SSL is a commonly-used protocol for managing the security of a message transmission on
the Internet. SSL uses a program layer located between the Internet's Hypertext Transfer Protocol (HTTP) and Transport
Control Protocol (TCP) layers. SSL is included as part of both the Microsoft and Netscape browsers and most Web
server products. Developed by Netscape, SSL also gained the support of Microsoft and other Internet client/server
developers as well and became the de facto standard until evolving into Transport Layer Security. The “sockets” part of
the term refers to the sockets method of passing data back and forth between a client and a server program in a network
or between program layers in the same computer. SSL uses the public-and-private key encryption system from RSA,
which also includes the use of a digital certificate.

Shared Key. Shared Key authentication is an algorithm where both the AP and the MU share an authentication key.

SID. System Identification code. An identifier issued by the FCC for each market. It is also broadcast by the cellular carriers
to allow cellular devices to distinguish between the home and roaming service.

SMDK. Symbol Mobility Developer’s Kit.

Soft Reset. See Warm Boot.

Subnet. A subset of nodes on a network that are serviced by the same router. See Router.

Subnet Mask. A 32-bit number used to separate the network and host sections of an IP address. A custom subnet mask
subdivides an IP network into smaller subsections. The mask is a binary pattern that is matched up with the IP address
to turn part of the host ID address field into a field for subnets. Default is often 255.255.255.0.

Substrate. A foundation material on which a substance or image is placed.

Symbol. A scannable unit that encodes data within the conventions of a certain symbology, usually including start/stop
characters, quiet zones, data characters and check characters.

Symbology. The structural rules and conventions for representing data within a particular bar code type (e.g. UPC/EAN,
Code 39, PDF417, etc.).
Glossary - 8 WT4090 Wearable Terminal User Guide

T
TCP/IP. (Transmission Control Protocol/Internet Protocol) A communications protocol used to internetwork dissimilar
systems. This standard is the protocol of the Internet and has become the global standard for communications. TCP
provides transport functions, which ensures that the total amount of bytes sent is received correctly at the other end.
UDP is an alternate transport that does not guarantee delivery. It is widely used for real-time voice and video
transmissions where erroneous packets are not retransmitted. IP provides the routing mechanism. TCP/IP is a routable
protocol, which means that all messages contain not only the address of the destination station, but the address of a
destination network. This allows TCP/IP messages to be sent to multiple networks within an organization or around the
world, hence its use in the worldwide Internet. Every client and server in a TCP/IP network requires an IP address, which
is either permanently assigned or dynamically assigned at startup.

Telnet. A terminal emulation protocol commonly used on the Internet and TCP/IP-based networks. It allows a user at a
terminal or computer to log onto a remote device and run a program.

Terminal. See Wearable Terminal.

Terminal Emulation. A “terminal emulation” emulates a character-based mainframe session on a remote non-mainframe
terminal, including all display features, commands and function keys. The WT4090 Series supports Terminal Emulations
in 3270, 5250 and VT220.

TFTP. (Trivial File Transfer Protocol) A version of the TCP/IP FTP (File Transfer Protocol) protocol that has no directory or
password capability. It is the protocol used for upgrading firmware, downloading software and remote booting of diskless
devices.

Tolerance. Allowable deviation from the nominal bar or space width.

Transmission Control Protocol/Internet Protocol. See TCP/IP.

Transport Layer Security (TLS). TLS is a protocol that ensures privacy between communicating applications and their
users on the Internet. When a server and client communicate, TLS ensures that no third party may eavesdrop or tamper
with any message. TLS is the successor to the Secure Sockets Layer (SSL).

Trivial File Transfer Protocol. See TFTP.

U
UPC. Universal Product Code. A relatively complex numeric symbology. Each character consists of two bars and two
spaces, each of which is any of four widths. The standard symbology for retail food packages in the United States.

UDP. User Datagram Protocol. A protocol within the IP protocol suite that is used in place of TCP when a reliable delivery
is not required. For example, UDP is used for real-time audio and video traffic where lost packets are simply ignored,
because there is no time to retransmit. If UDP is used and a reliable delivery is required, packet sequence checking and
error notification must be written into the applications.
Glossary - 9

U
Visible Laser Diode (VLD). A solid state device which produces visible laser light.

W
Warm Boot. A warm boot restarts the wearable terminal by closing all running programs. All data that is not saved to flash
memory is lost.

Wearable Terminal. In this text, wearable terminal refers to the Symbol WT4090 that can be set up to communicate with a
network, using wireless radio technology.
Glossary - 10 WT4090 Wearable Terminal User Guide
Index

Numerics four slot cradles . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

battery charging temperature . . . . . . . . . . . . . . . . . . A-2
1-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 battery icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
28-key keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 battery status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
2-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 boot
cold . . . . . . . . . . . . . . . . . . . . . .1-14, 2-1, 2-17, 2-18
A warm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1, 2-17
bullets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 buttons
EMDK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
four slot charge only cradle . . . . . . . . . . . . . . . . . 3-1
four slot cradles
battery charging . . . . . . . . . . . . . . . . . . . . . . 3-5 C
four slot Ethernet cradle . . . . . . . . . . . . . . . . . . . 3-4 characters, special . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
LED indicators . . . . . . . . . . . . . . . . . . . . . . . 3-5 charging
four slot Ethernet/USB cradle . . . . . . . . . . . .1-3, 3-1 spare batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
four slot spare battery charger . . . . . . . . . . . . . . 1-3 temperature range . . . . . . . . . . . . . . . . . . . . . . . A-8
serial/USB cradle . . . . . . . . . . . . . . . . . . . . .1-3, 3-1 charging batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
single slot serial/USB cradle . . . . . . . . . . . . . . . . 3-2 charging spare batteries . . . . . . . . . . . . . . . . . . . . . . 1-9
LED indicators . . . . . . . . . . . . . . . . . . . .3-3, 3-6 cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
spare battery charger . . . . . . . . . . . . . . . . . . . . . 3-6 cold boot . . . . . . . . . . . . . . . . . . . . .1-14, 2-1, 2-17, 2-18
power connection . . . . . . . . . . . . . . . . . . . . . 3-6 configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
B conventions
notational . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
backup battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 cradles
bar codes four slot charge only . . . . . . . . . . . . . . . . . . . . . . 3-1
one dimensional . . . . . . . . . . . . . . . . . . . . . . . . 2-19 four slot cradles
two dimensional . . . . . . . . . . . . . . . . . . . . . . . . 2-20 battery charging . . . . . . . . . . . . . . . . . . . . . . 3-5
battery four slot Ethernet . . . . . . . . . . . . . . . . . . . . . . . . 3-4
backup charging . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 four slot Ethernet cradle
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 LED indicators . . . . . . . . . . . . . . . . . . . . . . . 3-5
temperature range . . . . . . . . . . . . . . . . . . . . A-8 four slot Ethernet/USB . . . . . . . . . . . . . . . . . 1-3, 3-1
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 serial/USB . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3, 3-1
removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 single slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
battery charging LED indicators . . . . . . . . . . . . . . . . . . . . 3-3, 3-6
Index - 2 WT4090 Wearable Terminal User Guide

spare battery charger . . . . . . . . . . . . . . . . . . . . . 3-6 I

power connection . . . . . . . . . . . . . . . . . . . . . 3-6
current time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 icon
battery status . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
icons
D alpha mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
data capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x, 2-19 ALT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
adjusting the distance . . . . . . . . . . . . . . . . . . . . 2-20 CTRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
imager operational modes function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
decode mode . . . . . . . . . . . . . . . . . . . . . . . 2-20 shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
image capture mode . . . . . . . . . . . . . . . . . . 2-21 imager. See data capture, imaging
pick list mode . . . . . . . . . . . . . . . . . . . . . . . 2-21 imaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20
imaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 information, service . . . . . . . . . . . . . . . . . . . . . . . . . . .xiii
indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 installing main battery . . . . . . . . . . . . . . . . . . . . . . . . 1-7
laser scanning . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
one dimensional bar codes . . . . . . . . . . . . . . . . 2-19 K
scan angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
scan range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 key descriptions
scanning . . . . . . . . . . . . . . . . . . . . . . . . . .2-19, 2-21 two-color alphanumeric . . . . . . . . . . . . . . . . 2-4, 2-6
two dimensional bar codes . . . . . . . . . . . . . . . . 2-20 keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
date/time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
DCP for WT4090c50 . . . . . . . . . . . . . . . . . . . . . . . . . . xii 28-key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Device Configuration Package . . . . . . . . . . . . . . . . . 1-4 double-tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Device Configuration Package for WT4090c50 . . . . . . xii types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
dimensions . . . . . . . . . . . . . . . . . . . . .A-1, A-3, A-4, A-6 voice only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x, A-1
drop specification . . . . . . . . . . . . . . . . .A-2, A-4, A-5, A-7 L
laser safety . . . . . . . . . . . . . . . . . . . . . . . . A-4, A-5, A-8
E laser scanning
electrical safety . . . . . . . . . . . . . . . . . .A-3, A-4, A-5, A-8 See data capture . . . . . . . . . . . . . . . . . . . . . . . . 2-19
EMDK for eVC4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Enterprise Mobility Developer Kit LEDs
See EMDK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 scan and decode . . . . . . . . . . . . . . . . . . . . . . . . 2-21
Enterprise Mobility Developer Kit for eVC4 . . . . . . . . . xii lithium-ion battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

F M
four slot charge only . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 main battery
four slot cradles charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7, 1-8
battery charging . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 temperature range . . . . . . . . . . . . . . . . . . . . A-8
four slot Ethernet cradle . . . . . . . . . . . . . . . . . . . . . . 3-4 installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
four slot Ethernet/USB . . . . . . . . . . . . . . . . . . . . .1-3, 3-1 memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x, A-2
four slot spare battery charger . . . . . . . . . . . . . . . . . . 1-3
O
G operating environment, wearable terminal . . . . . . . . . A-1
getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 operating system . . . . . . . . . . . . . . . . . . . . . . . . . . x, A-2
operating temperature . . . . . . . . . . . . A-2, A-4, A-5, A-7

H
P
hard reset . . . . . . . . . . . . . . . . . . . 1-14, 2-1, 2-17, 2-18
humidity . . . . . . . . . . . . . . . . . . . . . . . .A-2, A-4, A-5, A-7 parts of the wearable terminal . . . . . . . 1-1, 1-2, 1-5, 1-6
Index - 3

power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 battery charging . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

power button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 terminal
power LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
power supply regulatory compliance . . . . . . . . . . . . . B-1 terminal charging . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
four slot spare battery charger . . . . . . . . . . . . . 4-12
R single slot serial/USB cradle . . . . . . . . . . . . . . . 4-13
radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x wearable terminal . . . . . . . . . . . . . . . . . . . . . . . . 4-6
regulatory compliance, power supply . . . . . . . . . . . . B-1
related documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii U
related software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
removing main battery . . . . . . . . . . . . . . . . . . . . . . . . 1-9 unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
reset
hard . . . . . . . . . . . . . . . . . . . . . 1-14, 2-1, 2-17, 2-18
soft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1, 2-17
W
resetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17 warm boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1, 2-17
wearable terminal
power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
S
starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14
scan status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 weight . . . . . . . . . . . . . . . . . . . . . . . . A-1, A-3, A-4, A-6
scan status See also data capture wireless status icon . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
scanning WLAN 802.11a/b/g . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 WLAN status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
imaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 WPAN Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20
See data capture . . . . . . . . . . . . . . . . . . . . . . . . 2-19
screen
Symbol splash screen . . . . . . . . . . . . . . . . . . . . 1-15
serial/USB cradle . . . . . . . . . . . . . . . . . . . . . . . . .1-3, 3-1
service information . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
single slot serial/USB cradle . . . . . . . . . . . . . . . . . . . 3-2
LED indicators . . . . . . . . . . . . . . . . . . . . . . . .3-3, 3-6
soft reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1, 2-17
spare batteries
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
spare battery
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
spare battery charger . . . . . . . . . . . . . . . . . . . . . . . . 3-6
power connection . . . . . . . . . . . . . . . . . . . . . . . . 3-6
special characters . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
starting the wearable terminal . . . . . . . . . . . . . .1-7, 1-14
status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
status icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
status icons
Windows CE 5.0 . . . . . . . . . . . . . . . . . . . . . . . . 2-11
storage temperature . . . . . . . . . . . . . .A-2, A-4, A-5, A-7
suspend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9, 2-1

T
taskbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
technical specifications, wearable terminal . . . . . . . . A-1
temperature
Index - 4 WT4090 Wearable Terminal User Guide
Motorola, Inc.
One Motorola Plaza
Holtsville, New York 11742, USA
1-800-927-9626
http://www.motorola.com/enterprisemobility

MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office.
All other product or service names are the property of their registered owners.
© Motorola, Inc. 2009

72E-87633-05 Revision A - December 2009

A+ Guide To Managing and Maintaining Your PC, 6e: Lesson 2 Introducing Operating Systems
No ratings yet
A+ Guide To Managing and Maintaining Your PC, 6e: Lesson 2 Introducing Operating Systems
56 pages
Siemens FS-250 Programming Software
No ratings yet
Siemens FS-250 Programming Software
2 pages
X55 Manual Complete
No ratings yet
X55 Manual Complete
224 pages
Zebra - ZT600 Series Parts Catalog-Global-En-us
No ratings yet
Zebra - ZT600 Series Parts Catalog-Global-En-us
12 pages
09 Xentry Diagnosis Kit 4-Blf en
No ratings yet
09 Xentry Diagnosis Kit 4-Blf en
117 pages
Honeywell Vista 48
No ratings yet
Honeywell Vista 48
7 pages
SD Manager2
No ratings yet
SD Manager2
90 pages
Printer Status Report: Product Information
No ratings yet
Printer Status Report: Product Information
1 page
Isgui 503
No ratings yet
Isgui 503
98 pages
Intel (R) - HID - Event - Filter - Release Notes - Bring Up Guide - Rev4.0
No ratings yet
Intel (R) - HID - Event - Filter - Release Notes - Bring Up Guide - Rev4.0
28 pages
CAN Bus for Beginners: A Practical Guide to Automotive Networking
From Everand
CAN Bus for Beginners: A Practical Guide to Automotive Networking
Mohamad Charara
No ratings yet
Manual JavaPOS Installation English V4.17
No ratings yet
Manual JavaPOS Installation English V4.17
33 pages
EcoSUI EN UM K5
No ratings yet
EcoSUI EN UM K5
300 pages
MC55 Intragrators Guide 1414710
No ratings yet
MC55 Intragrators Guide 1414710
128 pages
Installation Guide
No ratings yet
Installation Guide
36 pages
Mvme 6100
No ratings yet
Mvme 6100
121 pages
ETCulvert User Manual V3
No ratings yet
ETCulvert User Manual V3
176 pages
Mastering Windows Automation with AHK 2.0
From Everand
Mastering Windows Automation with AHK 2.0
John Nunez
No ratings yet
How To Bypass Internet Using Command Prompt For Windows PC (NEW)
No ratings yet
How To Bypass Internet Using Command Prompt For Windows PC (NEW)
11 pages
User Manual WT4000
No ratings yet
User Manual WT4000
94 pages
VIDEO 2 PC - Driver Installation Instructions PDF
No ratings yet
VIDEO 2 PC - Driver Installation Instructions PDF
2 pages
Installation Guide: Hardware and Software Requirements
No ratings yet
Installation Guide: Hardware and Software Requirements
20 pages
Product Name(s) :: HP Pagewide Managed Color MFP E58650 Printer Series Firmware Readme
No ratings yet
Product Name(s) :: HP Pagewide Managed Color MFP E58650 Printer Series Firmware Readme
40 pages
Motorola MVME6100 143358
No ratings yet
Motorola MVME6100 143358
90 pages
Computerised Systems Architecture: An embedded systems approach
From Everand
Computerised Systems Architecture: An embedded systems approach
S Mathioudakis
No ratings yet
User Manual: Channel Explorer
No ratings yet
User Manual: Channel Explorer
58 pages
Manual KONICA MINOLTA 4020vserv. Manual - Menu
No ratings yet
Manual KONICA MINOLTA 4020vserv. Manual - Menu
44 pages
x56 Hotas
No ratings yet
x56 Hotas
563 pages
The Linux Terminal for Advanced Users - The Command Line Made Easy: First Edition
From Everand
The Linux Terminal for Advanced Users - The Command Line Made Easy: First Edition
Michael Basler
No ratings yet
Mvme2400 Series
No ratings yet
Mvme2400 Series
175 pages
fx7400 Integrator
No ratings yet
fx7400 Integrator
122 pages
Cloud Computing : Beginners And Intermediate User Guide
From Everand
Cloud Computing : Beginners And Intermediate User Guide
David comer
No ratings yet
mc40 4x1 User Guide
No ratings yet
mc40 4x1 User Guide
106 pages
Quick Start 12x13 NEXT - WEB
No ratings yet
Quick Start 12x13 NEXT - WEB
52 pages
Plain JavaScript: Learning the Front-End
From Everand
Plain JavaScript: Learning the Front-End
Roger Beans-Rivet
No ratings yet
Frontier Series: Di Print/Data Writing Service Software Ver.5.5
No ratings yet
Frontier Series: Di Print/Data Writing Service Software Ver.5.5
78 pages
Nabucco Verdi Ricky King Guitar Tab
100% (1)
Nabucco Verdi Ricky King Guitar Tab
2 pages
Office 2003 Prof Step by Step Installation Guide Prof
No ratings yet
Office 2003 Prof Step by Step Installation Guide Prof
32 pages
Software Patterns Made Easy
From Everand
Software Patterns Made Easy
Justice Nanhou
No ratings yet
Linux For Beginners : From Zero To System Admin
From Everand
Linux For Beginners : From Zero To System Admin
David William
No ratings yet
1490T Tutorial 2. Guide To Deleting Unnecessary Files To Free Up Space. and Notes On Other Files
No ratings yet
1490T Tutorial 2. Guide To Deleting Unnecessary Files To Free Up Space. and Notes On Other Files
9 pages
Micro Kioscos
No ratings yet
Micro Kioscos
136 pages
Mw100firmware Install E
No ratings yet
Mw100firmware Install E
7 pages
Hello-LIONEL RICHIE-LYRICS and Chords
No ratings yet
Hello-LIONEL RICHIE-LYRICS and Chords
2 pages
2010 Installation Instructions
No ratings yet
2010 Installation Instructions
29 pages
Gravity - John Mayer
No ratings yet
Gravity - John Mayer
1 page
I Can Print But Cannot Scan Via Network. (For Windows®) - Brother
No ratings yet
I Can Print But Cannot Scan Via Network. (For Windows®) - Brother
14 pages
M Notifier Manual Programacion Nfs 640
No ratings yet
M Notifier Manual Programacion Nfs 640
116 pages
Willie Nelson - She Is Gone
No ratings yet
Willie Nelson - She Is Gone
2 pages
The IPhone 12 Pro Photography User Guide: Your Guide For Smartphone Photography For Taking Pictures Like A Pro Even As A Beginner
From Everand
The IPhone 12 Pro Photography User Guide: Your Guide For Smartphone Photography For Taking Pictures Like A Pro Even As A Beginner
Wendy Hills
No ratings yet
MC9090 Wireless Configuration
No ratings yet
MC9090 Wireless Configuration
84 pages
CMMmicro UserGuideIss1
No ratings yet
CMMmicro UserGuideIss1
37 pages
G24 Developer Kit Rev E 310107
No ratings yet
G24 Developer Kit Rev E 310107
86 pages
Configuring A Connection Between WinCC Flexible Runtime and A SIMATIC PLC Via Profibus
100% (1)
Configuring A Connection Between WinCC Flexible Runtime and A SIMATIC PLC Via Profibus
30 pages
VC5090 Vehicle Computer
No ratings yet
VC5090 Vehicle Computer
226 pages
68009681001-BD Enus MOTOTRBO DEM 300 Numeric Display Mobile Radio User Guide
No ratings yet
68009681001-BD Enus MOTOTRBO DEM 300 Numeric Display Mobile Radio User Guide
160 pages
User Manual: 4 Inches
No ratings yet
User Manual: 4 Inches
150 pages
MC55 Enterprise Digital Assistant: User Guide
No ratings yet
MC55 Enterprise Digital Assistant: User Guide
244 pages
Wireless Motorola MC 9500 Manual PDF
No ratings yet
Wireless Motorola MC 9500 Manual PDF
112 pages
1DMotorolaSE 955guide
No ratings yet
1DMotorolaSE 955guide
268 pages
MC31XX Series Mobile Computer: User Guide
No ratings yet
MC31XX Series Mobile Computer: User Guide
168 pages
Samsung Galaxy S4 Mini I257m User Guide Eng
No ratings yet
Samsung Galaxy S4 Mini I257m User Guide Eng
201 pages
Note 10 1 2014 Edition Um
No ratings yet
Note 10 1 2014 Edition Um
144 pages
Commandcentral Body Worn and In-Car Video Deployment User Guide
No ratings yet
Commandcentral Body Worn and In-Car Video Deployment User Guide
43 pages
Samsung Galaxy Note 8
No ratings yet
Samsung Galaxy Note 8
200 pages
Manual Do Coletor de Dados mc9090g
No ratings yet
Manual Do Coletor de Dados mc9090g
96 pages
MC 75 Integrator S Guide
No ratings yet
MC 75 Integrator S Guide
168 pages
Nvg510manual PDF
No ratings yet
Nvg510manual PDF
152 pages
Integrator Guide
No ratings yet
Integrator Guide
240 pages
Database Schema PDF
No ratings yet
Database Schema PDF
1,297 pages
MC555 Integrator Guide10886102a 200903
No ratings yet
MC555 Integrator Guide10886102a 200903
128 pages
Motorola User Guide
No ratings yet
Motorola User Guide
178 pages
ATT I747 Galaxy S III English User Manual LH1 F5
No ratings yet
ATT I747 Galaxy S III English User Manual LH1 F5
235 pages
User Guide - Motorola MC31xx
No ratings yet
User Guide - Motorola MC31xx
168 pages
Samsung Galaxy S4 I337 UG ENG D5
No ratings yet
Samsung Galaxy S4 I337 UG ENG D5
212 pages
DataWedge 3.0 AdvancedConfigurationGuide
No ratings yet
DataWedge 3.0 AdvancedConfigurationGuide
94 pages
UserGuide Phone GalaxyAceIIx
No ratings yet
UserGuide Phone GalaxyAceIIx
167 pages
SYS12
No ratings yet
SYS12
617 pages
Strat
No ratings yet
Strat
203 pages
Samsung Galaxy S5 Active Manual
100% (1)
Samsung Galaxy S5 Active Manual
213 pages
Samsung Galaxy S5
No ratings yet
Samsung Galaxy S5
214 pages
Data Wedge
No ratings yet
Data Wedge
94 pages
23 June 2005: Motorola Document Classification, File Name, Rev Number
No ratings yet
23 June 2005: Motorola Document Classification, File Name, Rev Number
9 pages
DataWedge Advanced Configuration Guide
No ratings yet
DataWedge Advanced Configuration Guide
94 pages
v300 Refguide
No ratings yet
v300 Refguide
52 pages
MOTOwi4 Transportation Solutions Presentation
No ratings yet
MOTOwi4 Transportation Solutions Presentation
44 pages
EBTS Volume 1 - System Installation and Testing - Motorola iDEN
No ratings yet
EBTS Volume 1 - System Installation and Testing - Motorola iDEN
583 pages
Verizon Samsung Galaxy S5 User Manual SM G900V, Kitkat, English
No ratings yet
Verizon Samsung Galaxy S5 User Manual SM G900V, Kitkat, English
167 pages
Upgrade Guide For 1.9.0.0.29
No ratings yet
Upgrade Guide For 1.9.0.0.29
286 pages
Verizon Wireless I200 Galaxy Stellar English User Manual LG4 F3
No ratings yet
Verizon Wireless I200 Galaxy Stellar English User Manual LG4 F3
186 pages
MC9500K User Manual From Barcode Datalink 11850101a
No ratings yet
MC9500K User Manual From Barcode Datalink 11850101a
258 pages
EBTS Volume 3 - RF Distribution Systems - Motorola iDEN
No ratings yet
EBTS Volume 3 - RF Distribution Systems - Motorola iDEN
625 pages
User Manual MC3190
100% (1)
User Manual MC3190
186 pages
Motorola MC3090 G Product Manual
No ratings yet
Motorola MC3090 G Product Manual
146 pages

Motorola WT4090 User Guide

Uploaded by

Motorola WT4090 User Guide

Uploaded by

WT4070/90 Wearable Terminal

© 2006-9 Motorola, Inc. All rights reserved.

Change Date Description

-01 Rev. A 09/25/2006 Initial Release

-04 Rev. 10/09/2008 Add touch screen configuration.

-05 Rev. 12/15/09 Add Voice Only WT4090 configuration support.

About This Guide

Chapter 1: Getting Started

Chapter 2: Using the Wearable Terminal

Four Slot Spare Battery Charger ......................................................................................................... 3-6

Chapter 4: Maintenance & Troubleshooting

Appendix B: Regulatory Information

Accessory Power Supply Regulatory Compliance ............................................................................... B-1

• Microsoft Application Guide - describes how to use Microsoft developed applications.

2.8” QVGA 128 MB RAM/ Optional Windows Two-color

1. Press CTRL and then ESC to open the Start menu.

4. Press ENTER key to launch Control Panel.

6. Press ENTER key to launch System Information applet.

1. Press ALT - w. The Wireless menu appears.

2. Using the navigation keys, select Wireless Status.

3. Press ENTER. The Wireless Status window displays.

4. Press 5. The Versions screen appears.

• “Wearable terminal” refers to the WT4070/90 series of wearable terminals.

Related Documents and Software

• WT4090 Quick Start Guide, p/n 72-86717-xx

• ActiveSync software, available at: http://www.microsoft.com.

• Serial number of the unit

Display Power Button

Charge Status LED

Action Keypad Speaker

Figure 1-1 WT4070/90 Wearable Terminal Front View

Charge Status LED

Action Keypad Speaker

Figure 1-2 Voice Only WT4090 Wearable Terminal Front View

Cradle Connector Interface Connector

Figure 1-3 Wearable Terminal Back View

Table 1-1 Parts of the Wearable Terminal

Charge Status LED Indicates the charging status of the battery.

Table 1-1 Parts of the Wearable Terminal (Continued)

Application Controlled LED Application programmable. (Voice Only WT4090 only)

Speaker Provides audio playback.

Keypads Enable user input.

Battery Provides power to the wearable terminal.

Interface Connector Provides electrical connection to an accessory, such as a scanner.

Battery Release Releases the battery for removal.

Cleat Provides mounting for the wrist mount and cradles.

Unpacking the Wearable Terminal

Verify that you received all equipment listed below:

Four Slot Spare Battery Charges up to four spare batteries.

Table 1-2 Wearable Terminal Accessories (Continued)

RS409 Scanner Provides scanning capability.

RS309 Scanner Provides scanning capability.

RS507 Scanner Provides wired or wireless imaging capability.

Headset For audio playback/recording during voice-enabled applications.

Headset Adapters Connect an optional headset to the wearable terminal.

Replacement Batteries Standard Capacity Battery: 2330 mAh (minimum)

Screen Protectors Package of 3 screen protectors.

Software Enterprise Mobility Developer Kits available at:

Device Configuration Package (DCPforWT40x0c50) and Platform SDK

Figure 1-4 RS409 Scanner

Scan Button Trigger Cable

Figure 1-5 RS309 Scanner

Figure 1-6 RS507 Scanner

• Install the main battery

Installing and Removing the Main Battery

Figure 1-7 Installing the Main Battery

Charging the Battery

Charging the Main Battery and Memory Backup Battery

To charge the main battery:

2. Insert the wearable terminal into a cradle.

Table 1-3 Wearable Terminal LED Charge Indicators

Fast Blinking Amber Charging error:

Solid Amber Charging complete.

Charging Spare Batteries

• Single Slot USB Cradle

Removing the Main Battery