06

Electrostatic Cable Coater
ECC 701
Preliminary Parts List P/N 7135883_06
- English -
Issued 08/16
NORDSON ENGINEERING GMBH D LÜNEBURG D GERMANY

Order number
P/N = Order number for Nordson products
Notice
This is a Nordson Corporation publication which is protected by copyright. Original copyright date 2008.
No part of this document may be photocopied, reproduced, or translated to another language without the prior
written consent of Nordson Corporation. The information contained in this publication is subject to change
without notice.
 2016 All rights reserved.

- Original document -
Trademarks
AccuJet, AeroCharge, Allegro, Apogee, AquaGuard, Artiste, Asymtek, Automove, Autotech, Baitgun, BKG, Blue Box, BM-32, BM-58, BM-63, Bowtie,
Build‐A‐Part, CanWorks, Century, CF, CleanSleeve, CleanSpray, Color‐on‐Demand, ColorMax, Connections to Life, Contour, Control Coat, Coolwave,
Cross‐Cut, CrystallCut, cScan+, Dage, Dispensejet, DispenseMate, DuraBlue, DuraDrum, Durafiber, DuraPail, Dura‐Screen, Durasystem, Easy Coat,
Easymelt, Easymove Plus, Ecodry, Econo‐Coat, e.dot, EFD, Eliminator, Emerald, Encore, Equatherm, ESP, e-stylized, ETI‐stylized, Excel 2000, Fibrijet,
Fillmaster, FlexiCoat, Flexi‐Spray, Flex‐O‐Coat, Flow Sentry, Fluidmove, FoamMelt, FoamMelt - stylized, FoamMix, F.R. Gross, Freedom, Fulfill,
GreenUV, HDLV, Heli‐flow, Helix, Horizon, Hot Shot, iControl, iDry, iFlow, Isocoil, Isocore, Iso‐Flo, iTRAX, JR, KB30, Kinetix, KISS, Lean Cell, Little Squirt,
LogiComm, Magnastatic, March, Maverick, MEG, Meltex, MicroCoat, MicroMark, Micromedics, Micro‐Meter, MicroSet, Microshot, Millenium, MiniBlue,
Mini Squirt, Moist‐Cure, Mountaingate, MultiScan, NexJet, No‐Drip, Nordson, Nordson-stylized, Nordson and Arc, nXheat, OptiMix, Optimum, Package
of Values, Paragon, PatternView, PermaFlo, PICO, PicoDot, Plasmod, PluraFoam, Poly-Check, Polymer Solution Casting, Porous Coat, PowderGrid,
Powderware, Precisecoat, PRIMARC, Printplus, Prism, ProBlue, Prodigy, Pro‐Flo, Program‐A‐Bead, Program‐A‐Shot, Program‐A‐Stream,
Program‐A‐Swirl, ProLink, Pro‐Meter, Pro‐Stream, Pulsar, Quantum, RBX, Rhino, Saturn, Saturn with rings, Scoreguard, SC5, S. design stylized, Seal
Sentry, Sealant Equipment & Engineering, Inc., SEE and design, See‐Flow, Select Charge, Select Coat, Select Cure, Servo‐Flo, Shot‐A‐Matic, Signature,
Signature - stylized, Slautterback, Smart‐Coat, Smart‐Gun, Solder Plus, Spectrum, Speed‐Coat, Spirex, Spraymelt, Spray Squirt, StediFlo, Stratablend,
Super Squirt, SureBead, Sure Clean, Sure Coat, Sure‐Max, SureWrap, TAH, Tela‐Therm, Tip‐Seal, Tracking Plus, TRAK, Trends, Tribomatic, Trilogy,
TrueBlue, TrueCoat, Tubesetter, Ultra, UniScan, UpTime, U‐TAH, Value Plastics, Vantage, Veritec, VersaBlue, Versa‐Coat, VersaDrum, VersaPail,
Versa‐Screen, Versa‐Spray, VP Quick Fit, VP Quick-Fit stylized, VP stylized, Walcom, Watermark, When you expect more., X‐Plane, Xaloy,
Xaloy-stylized, YesTech are registered trademarks - ® - of Nordson Corporation.
Accubar, Active Nozzle, Advanced Plasma Systems, AeroDeck, AeroWash, AltaBlue, AltaSlot, Alta Spray, AquaCure, ATS, Auto‐Flo, AutoScan, Avex,
Axiom, Best Choice, BetterBook, Blue Series, Bravura, CanNeck, CanPro, Celero, Chameleon, Champion, Check Mate, ClassicBlue, Classic IX, Clean
Coat, Cobalt, Concert, Conexis, ContourCoat, Controlled Fiberization, Control Weave, CPX, cSelect, Cyclo‐Kinetic, DispensLink, DropCure, Dry Cure,
DuraBraid, DuraCoat, DuraPUR, e.dot+, E‐Nordson, Easy Clean, EasyOn, EasyPW, Eclipse, EcoBead, EdgeControl, Equalizer, EquiBead, Exchange
Plus, FillEasy, Fill Sentry, FlexSeam, Flow Coat, Fluxplus, G‐Net, G‐Site, Genius, Get Green With Blue, Gluie, Ink‐Dot, Inspire, IntelliJet, iON, Iso‐Flex,
iTrend, KVLP, Lacquer Cure, Maxima, Measuring the Invible, Mesa, MicroFin, MicroMax, Mikros, MiniEdge, Minimeter, MiniPUR, MonoCure, Multifil,
MultiScan, Myritex, Nano, OmniScan, Optima, OptiStroke, Optix, Origin, Partnership+Plus, PatternJet, PatternPro, PCI, PharmaLok, Pinnacle, PluraMix,
Powder Pilot, Powder Port, Powercure, ProBlue Liberty, Process Sentry, Pulse Spray, PURBlue, PUReOne, PURJet, PurTech, Quad Cure, Ready Coat,
RediCoat, RollVIA, Royal Blue, Select Series, Sensomatic, Shaftshield, SheetAire, Smart, Smartfil, SolidBlue, Spectral, Spectronic, SpeedKing, Spray
Works, StediTherm, StrokeControl, Summit, Sure Brand, SureFoam, SureMix, SureSeal, Swirl Coat, Tempus, ThruWave, TinyCure, Trade Plus, Trio,
TruFlow, Turbo, Ultra FoamMix, UltraMax, Ultrasaver, Ultrasmart, Unity, UNITYMotion, Universal, ValueMate, Versa, VersaPUR, Viper, Vista, Web Cure,
2 Rings (design), 781Mini, 787Mini are trademarks - T - of Nordson Corporation.
Designations and trademarks stated in this document may be brands that, when used by third parties for their own purposes,
could lead to violation of the owners' rights.
P/N 7135883_06 ECC701 E 2016 Nordson Corporation

Table of Contents I
Table of Contents
How to Use Illustrated Parts List . . . . . . . . . . . . . . . . . . . . . . . . . 1
Component Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Configuration Code - Obsolete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Configuration Code - Beginning 2016 . . . . . . . . . . . . . . . . . . . . . . . 3
Assembly Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Cable Coater, Complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Basic Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Filter Cleaning Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Main Filter Cassette Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Air Pressure Regulators Hopper & Attached Spray Chamber
Fluidization & Signs - Outside - . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Air Pressure Regulators Vantage Controller and
Filter Cleaning - Inside - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Hopper, complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Side Channel Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Vantage Dual‐Gun Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Information on Sure Coat Gun Operation . . . . . . . . . . . . . . . 15
Spray Gun Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Versa‐Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Versa‐Spray - CERAMIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Sure Coat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Gun bracket for spray chamber size ”S” . . . . . . . . . . . . . . . . 17
Versa‐Spray II Automatic Spray Gun . . . . . . . . . . . . . . . . . . 18
Versa‐Spray II Flat Spray Nozzles . . . . . . . . . . . . . . . . . . . . . 19
Versa‐Spray II IPS Automatic Spray Gun - CERAMIC . . . . . 20
Sure Coat Automatic Spray Gun (Bar‐Mount) . . . . . . . . . . . 22
Sure Coat Flat Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . 23
Spray Chamber, Complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Safety Switch Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Attached Spray Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Fluid Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Remote Spray Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Screen Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Casters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Inlet/Outlet Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Connecting Branches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting Branch Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Rubber Lids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Spray Chamber with Rectangular In‐ / Outlet: 150 x 50 . . . . 33
E 2016 Nordson Corporation ECC701 P/N 7135883_06

II Table of Contents
Recirculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Powder Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
KIT Powder Pump Ceramic w/ Pump, Standard‐Flow,
8 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
O‐Rings / Wear Parts for Pump P/N 327742 . . . . . . . . . . . . . 37
KIT Powder Pump Ceramic w/ Pump, Metric, 6 mm
(Obsolete) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
O‐Rings / Wear Parts for Obsolete Pump P/N 165636
(Ceramic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
KIT Powder Pump low & medium flow w/ Pump, Modular,
6 mm (Obsolete) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
O‐Rings / Wear Parts for Obsolete Pump P/N 224713
(Low & Medium Flow) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Venturi Throats Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Smart Venturi Throats Replacements . . . . . . . . . . . . . . . . . . . . . 42
Powder Recirculation Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Kit-INST Diaphragm Pressure Regulator
(2 Powder Recirc. Pumps) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Engineered Tribomatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Tribomatic Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Tribomatic Pump II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Service and Accessory Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Hoses & Tubings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Powder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Refill hopper (Feed Hopper) - HR . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Refill hopper (Feed Hopper) - NHR . . . . . . . . . . . . . . . . . . . . . . . . . 49
Metric Powder Transfer Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Transformer 400V / 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Transformer 480V / 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Cable Cleaning Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Cable Cleaning Exhaust - Replacement . . . . . . . . . . . . . . . . . . . . . 54
Reduced Powder Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Powder Flow Monitoring (PFM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Powder Flow Monitoring w/ 2 Potentiometers . . . . . . . . . . . . . . . . . 61
Kit Interface XS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Kit Key‐To‐Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Kit Filter Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Standard (Low Flow) Volume Kit / High Volume Kit . . . . . . . . . . . . 64
Pump Adapter, Standard (Low Flow) / High Flow . . . . . . . . . . . . . 64
Hinges, Handles, Turnbuckles and Keys . . . . . . . . . . . . . . . . . . . . 65
Filter Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Star Grip Replacement (Filter Cover) . . . . . . . . . . . . . . . . . . . . . . . 67
Filter Cleaning Parts (Star Grips) - OLD . . . . . . . . . . . . . . . . . . . . . 68
Main Filter Cassette Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Filter Cleaning Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Parts 1
How to Use Illustrated Parts List

The parts lists in this section are divided into the following columns:
Item— Identifies parts that can be obtained from Nordson.

Part— Nordson part number for each spare part shown in the illustration.
A row of hyphens in the column Part (‐ ‐ ‐ ‐ ‐) indicates that this part can
not be ordered separately.
Description— This column contains the name of the part and, when
appropriate, its dimensions and other properties. The points in the
column Description show the relationship between assemblies,
subassemblies and single parts.
Quantity— The quantity needed per unit, assembly or subassembly. The
abbreviation AR (as required) is used when this item is a bulk item or
when the quantity per assembly depends on the product version or
model.
Box / Code— Refer to Product Configuration.
NS: Not Shown

#: Engineered
Component Designation
The electrical components are labeled in accordance with DIN 40719, part 2.
NOTE: The green‐yellow electrostatic ground lines will be replaced in the
future with ESD braided ribbon cables. With new systems, the ESD lines are
gathered together in a star shape on the front of the coater.
Ground conductors that provide protective ground are still green‐yellow.
Tivar® is a registered Tradmark of Quadrant Engineering Plastic Products

2 Parts
Product Configuration
Configuration Code - Obsolete

Box Code Components / parts
1‐6 ECC701 Series & model
7 - Standard configuration
E Engineered
Options
8+9 CE Ceramic
VE Versa‐Spray
# SC Sure Coat (engineered)
# TR Tribomatic (engineered)
10+11 1N 1 spray gun, negative charge
2N 2 spray guns, negative charge
1P 1 spray gun, positive charge
2P 2 spray guns, positive charge
# 01 1 spray gun Tribomatic (engineered)
# 02 2 spray guns Tribomatic (engineered)
12 A 400 VAC, 3 Ph, Wye
B 230 VAC, 3 Ph, Delta
C 400 VAC, 3 Ph, Delta
D 230 VAC, 1 Ph
13 P 1 PFM (Powder Flow Monitoring) per gun
14 H Remote spray chamber & trolley w/ handwheel
R Attached spray chamber
W W/o spray chamber - customer provides the spray chamber -
L Remote spray chamber w/ KIT 90 deg.
M Remote spray chamber & trolley w/ clamp lever
15 C Ceramic powder pump*
* Standard flow pump: Used with most general powder coating applications
N Low & medium flow powder pump - until 11/2008
# T Tribomatic powder pump (engineered)
16 X Reserved

Parts 3
Configuration Code - Beginning 2016
Code ECC701-VE2PCPRNX
The configuration code is on the ID plate. The configuration code and the table indicate the components and
parts of this product that are configurable. The codes are also used to identify the spare parts.
Box Code Components / parts

1‐6 ECC701 Series & model
7 - Standard configuration
Options
8+9 VE Versa‐Spray Gun
CE Ceramic Spray Gun
## Sure Coat Gun
## Tribomatic Gun
10+11 1N 1 spray gun, negative charge
xN x spray guns, negative charge (x= no of spray guns in total; 2nd Vantage
controller and 1000 l/min‐dryer if more than two guns)
xP x spray gun(s), positive charge (x= no of spray guns in total; 2nd Vantage
controller and 1000 l/min‐dryer if more than two guns)
12 A 400 VAC, 3 Ph, Wye
B 230 VAC, 3 Ph, Delta
C 400 VAC, 3 Ph, Delta
D 230 VAC, 1 Ph (Standard)
13 P 1 PFM ”Powder Flow Monitoring” per gun (Standard)
X None
14 H Remote spray chamber & trolley w/ handwheel
W W/o spray chamber - customer provides the spray chamber -
ECC prepared for one return hose
# W/o spray chamber - customer provides the spray chamber -
ECC prepared for two return hoses
15 C Ceramic powder pump*
* Standard flow pump: Used with most general powder coating applications. Separate throat
for ”low flow” comes with pump
16+17 XX No Key‐To‐Line function, no spray chamber
KC Key‐To‐Line function, with spray chamber
KX Key‐To‐Line function, no spray chamber
XC No Key‐To‐Line function, with spray chamber
Contd.

4 Parts
Spray chamber 1
18 1 1 spray gun
2 2 spray guns
3 3 spray guns
4 4 spray guns
0 No spray chamber
19 S Cable diameter IN: 80 mm
M Cable diameter IN: 100 mm
L Cable diameter IN: 125 mm
R Rubber inlet plain
W Variabel IN Iris style, max. 180 mm
V Variabel IN Iris style, max. 125 mm
20 S Cable diameter OUT: 80 mm
M Cable diameter OUT: 100 mm
L Cable diameter OUT: 125 mm
W Variabel OUT Iris style, max. 180 mm
V Variabel OUT Iris style, max. 125 mm
21 1 Straight
2 Connection 90°
3 Connection 90° + pump
Spray chamber 2
22 1 1 spray gun
2 2 spray guns
3 3 spray guns
4 4 spray guns
0 No spray chamber
23 S Cable diameter IN: 80 mm
M Cable diameter IN: 100 mm
L Cable diameter IN: 125 mm
W Variabel IN Iris style, max. 180 mm
V Variabel IN Iris style, max. 125 mm
24 S Cable diameter OUT: 80 mm
M Cable diameter OUT: 100 mm
L Cable diameter OUT: 125 mm
W Variabel OUT Iris style, max. 180 mm
V Variabel OUT Iris style, max. 125 mm
25 1 Straight
2 Connection 90°
3 Connection 90° + pump
X -

Parts 5
Assembly Overview
Beginning on next page ...

6 Parts
Cable Coater, Complete
3
4
5
4
6
7 44
Fig. 1

Parts 7
Item Part Description Quantity Note Box Code

1 ------ Basic assembly w/o side channel blower 1
2 1043820 Vantage dual‐gun controller 1,2
3 7137258 KIT Versa‐Spray ceramic negative 1 8-11 CE1N
7137259 KIT Versa‐Spray negative 1 8-11 VE1N
7137260 KIT Versa‐Spray positive 1 8-11 VE1P
7132579 KIT Sure Coat negative 1 # 8-11 SC1N
4 7114843 KIT El. cabinet 400 VAC, 3 Ph, WYE 1 12 A
789630 Side channel blower 1
7114621 Cover Vantage controller 1
7114885 KIT El. cabinet 230 VAC, 3 Ph, Delta 1 12 B
7114860 KIT El. cabinet 400 VAC, 3 Ph, Delta 1 12 C
7153123 KIT Transformer 1 Fig.39
7114847 KIT El. cabinet 230 VAC, 1 Ph 1 12 D
630246 S Light tower w/ audible warning 1
633546 S S Alarm lamp, excl, connection 1
5 7114898 KIT PFM (Powder Flow Monitoring) 1 Fig.43 13 P
398276 S Inline‐current controller (sensor) 1
398277 S Connection cable (sensor to monitoring) 1
7114430 S Flow rate monitoring Min 1
7114623 Cover PFM AR 13 X,P
6 ------ Spray chamber (attached or w/ trolley) 1 14 R,H
7 7137252KIT Powder pump ceramic ”standard flow” 1 15 C
7137097KIT Powder pump low & medium flow 1 until 15 N
(see Fig. 28) 11/2008
NOTE: For electrical components and component designation refer to wiring diagram
Tribomatic

3 7141757 KIT Tribomatic gun 1 (2) # 8-11 TR01
6 ------ Spray chamber 0,1 #
7 7137322 KIT Powder pump Tribomatic 1 (2) # 15 T

8 Parts
Basic Assembly
2M8
5 5a
18 5b
11
10
6
7
18
17
15
16
16
1
14
3
17
18
17 9
Fig. 2

Parts 9

- ------ Basic assembly w/o side channel blower 1 7114892
1 7137319 S KIT Diaphragm dryer 500 l/min 1
464522 S S Solenoid valve HEE-D-MAXI-24 1 ‐17Y8
7148317 S S Micro filter LFMB-D-MAXI 1
7148318 S S Submicro filter LFMA-D-MAXI 1
7148316 S S Diaphragm dryer -500 1
7148315 S S Pressure regulator 1
7114715 S S Cable 1
7504101 S S Silencer 1
445880 S S Manifold 1
7144568 S KIT Diaphragm dryer 1000 l/min 1
2 ------ S Hopper, compl. (789641) 1 Fig.5
3 464644 S Filter mat 1
4 7178530 S Filter (w/ clamping) 1 A
7198475 S S Kit filter and seals 2
5 398445 S Fine filter, compl 1
5a 398483 S S Fine pre-filter ECC700 F20 - order 1
7144381 for replacement
5b 398480 S S Flange 1
6 ------ S Exhaust 1 1
398197 S S Filter sleeve 1
7 ------ S Exhaust 2 1
398198 S S Filter sleeve 1
9 398149 S Profile seal, flap 1
(17) 398084 S Profile seal, flap see below
10 398193 S Seal 1
11a+b ------ S Cover filter cpl. SPV - Fig.3
14 398287 S Solenoid valve 3/2‐way Refill hopper 1 ‐17Y1
398286 S Solenoid valve 5/2‐way Pneumatic 1 ‐17Y2
398286 cylinder “Beater” 1 ‐17Y5
398286 S Solenoid valve 5/2‐way Pneumatic 1 ‐17Y3
398286 cylinder “Blocking flap” 1 ‐17Y6
7114388 S Solenoid valve 3/2‐way Nozzle 1 ‐17Y4
7114388 1 ‐17Y7
15 398178 S Guide caster 2
398180 S Fixed caster 2
16 398181 S Machine foot, compl. 4
17 398084 S Profile seal (all doors) 10 m
18 416691 S Star grip D40 aM8x20 4
‐2M8 ------ Side channel blower, compl. 1 Fig.6
NOTE A: For ”star grip version” see Filter Cleaning Parts (Star Grips) - OLD at the end of this document

1 7137321 Kit-INST pneumatic,complete ECC701 1
7137319 S Kit-INST diaphragm dryer 500 l/min 1
7137320 S Kit-INST air valve terminal MPA ECC701 1

10 Parts
Filter Cleaning Parts

50
50
11a
13
11b
Fig. 3

4 7178530 S Filter (w/ clamping) 1
7198475 S S Kit filter and seals 2
11a 7178532 S Cover filter right cpl. SPV 1
11b 7178528 S Cover filter left cpl. SPV 1
398447 S S Lamellar cleaning compl 1 Fig. 46
13 398519 S S S Grooved ball bearing 2
- S S Cleaning parts vertical 1
50 7565312 S S S Pneumatic cylinder 1
50 7565312 S S Pneumatic cylinder 1
Main Filter Cassette Seals

- 7153690 KIT Seals (& instruction sheet) 1 4, Fig.3
- ------ S Seal, 5 mm 4
(for air intake AND clean air side)

Parts 11
Air Pressure Regulators Hopper & Attached Spray Chamber

Fluidization & Signs - Outside -
3 1 2 4 1 2
Fig. 4 ECC front

1 428255 S Pressure control valve 0,5-7bar G1/4 2
2 416747 S Pressure gauge 0-10bar G1/4 2
3 7141620 S Sign Air pressure regulator “Hopper” 1
4 7141619 S Sign Air pressure regulator “Attached 1 14 R
Spray Chamber Fluidization”
NOTE: For Vantage controller parts refer to Vantage Dual‐Gun Controller
Air Pressure Regulators Vantage Controller and Filter Cleaning - Inside -

- 7120028 Pressure control valve 0,5-7bar G1/4 1 top door
Vantage controller
- 7153118 S Pressure gauge 0-10bar G1/8 1
- 7120028 Pressure control valve 0,5-7bar G1/4 1 top door
Filter cleaning
- 7153118 S Pressure gauge 0-10bar G1/8 1

12 Parts
Hopper, complete
3,4
10
2
9
1
5
11
8
7
Fig. 5

1 398046 Buffer D25xH20 4
2 398045 Spacer 4
3,4 398060 Gista profile AR
5 400192 Plug-type thread-in ftg.-W-D06-R1/8-TURN 1
NS 788669 Air hose D6,0 d4,0 PUR blue AR
6 264523 Allan head cap screw M6x20 DIN912 SST 4
7 250032 Allan head cap screw M8x25 DIN912 SST 2
8 250027 Allan head cap screw M6x16 DIN912 A2-70 20
398056 Level sensor, hopper - replaced by - 3 LED
9 7114427 Level sensor capacitive, hopper 1 1 LED
10 398051 Fluid plate, hopper 1
11 398058 Vibrator, hopper 1

- 7163808 Kit-SVC Hopper, compl. * 1
* Hoses to be ordered seperately
- - S Cartridge+sealent+instructions

Parts 13
Side Channel Blower
21
20
7 8
Fig. 6 Side channel blower (from the manufacturer's manual)

- 789630 Side channel blower, compl. 1 Standard 12 A,B,C
‐2M8 398209 S Side channel blower 190 m3/h 1
- 789630 Side channel blower, compl. 1 Special 12 A,B,C
‐2M8 7153479 S Side channel blower 110 m3/h 1 #
- 7114851 Side channel blower, compl. 1 Standard 12 D
‐2M8 7137471 S Side channel blower 190 m3/h 1
- 7155269 Side channel blower, compl. 1 Special 12 D
‐2M8 7155269 S Side channel blower 110 m3/h 1 #
20 398210 S Buffer D50xH30 4 12 A-D
21 398494 S Silencer 1 12 A-D

7+8 7153021 SERVICE KIT Silencer 1

14 Parts
Vantage Dual‐Gun Controller

1 2
11
3
Top View
12
10
8 7
7
Regulator
4
5 6 5
Air Gauge
4a
Fig. 7 Vantager dual‐gun control system

Parts 15

1 1043718 Filter, line, w/ connector
2 322404 Switch, rocker, DPST, dust‐tight
3 1009090 Fuse, time delay, 215 series, 3.15 a
4 1023877 PCA, dual gun driver
4a 1095361
JUMPER,GUN ID,ODD NUMBER
5 1043857
Air gauge, 0-100 psi, 0-7 bar, kpa, 1 1/2 in.
6 1045838
Gasket, gauge, dia. 0.41 mm
7 1045841
Regulator, 7-125 psi
8 141603
Seal, panel, regulator
9 1042142
PCA, Vantage interface
10 1042060
Gasket, manifold, pneumatic output
11 1043906
Power supply, 24, 5, 12 Vdc
12 1043872
Valve 3 port, direct active, 24volt, 1/8‐in. RPT
w/ conn.
NS 1043723 Versa‐Spray cable, 12 m
NS 1054175 Versa‐Spray cable, 16 m
NS 1048653 Sure Coat cable, 12 m
NS 1054176 Sure Coat cable, 16 m
NS 1054613 Adapter, Tribomatic
NS 1054615 Connector, Versa‐Spray adapter A
NOTE A: Use this connector with older style Versa‐Spray II cables.
Information on Sure Coat Gun Operation
P/N 400193 P/N 288822

Fig. 8 Old and new throttle
Back of controller: The gun air is decreased with a throttle (P/N 288822) to
approx. 3.0 bar.
NOTE: Until approx. November 2009 the throttle P/N 400193 was used
temporarily. The Nordson factory setting is 0.3 bar.

16 Parts
Spray Gun Kits
P/N 7114976
1
8
9
3
11
12
10
6
1,2,3
4
Fig. 9

- 7158840 KIT ECC70x screws, hinge, locking jig (for 1
spray chamber P/N 7114976)
8 ------ S Locking jig 2
9 ------ S Hinge 2
- ------ S Pan head screw M5x20 PA 14
- ------ S Flat head screw M6x20 PA acc. DIN 963 8
- ------ S Pan head screw M6x20 PA acc.DIN 84 32

3 398165 Cover, spray chamber compl. 3
4 398164 Locking cover, spray chamber compl. 3
5 424065 S O‐ring 75x2,5 Viton

Parts 17
Versa‐Spray

- 7137259 KIT Versa Spray II negative 1 8+9 VE
1 173155 S Versa‐Spray II auto gun, SHUR-LOK 1 11 N
- 1043723 S Cable, Versa‐Spray, 12m, Vantage auto 1
4 398150 S Distance ring d72,5 D92,5 1
5 398151 S Packing 1
6 398216 S Gun bracket, compl. 1
- 7137260 KIT Versa Spray II positive ECC70x 1 8+9 VE
1 173156 S Versa‐Spray II auto gun, positive 1 11 P
SHUR-LOK
Versa‐Spray - CERAMIC

- 7137258 KIT Versa‐Spray II ceramic negative 1 8+9 CE
2 224877 S Gun #AG-PENXSXFCD 1 11 N
Sure Coat

- 7132579 KIT Sure Coat gun 1 # 8+9 SC
3 333751 S Bar mount gun, negative 1 11 N
- 1048653 S Cable, Sure Coat, 12m, Vantage auto 1
4 398150 S Distance ring Di72,5 Da92,5 1
6 7114441 S Gun bracket Sure Coat, compl. 1
- 317380 S Plug-type thread-in ftg.-G-D06-R1/4-0000 1
- 418511 S Plug-type thread fitting -G-D06-D04-RDC 1
- 289010 S Air-operated hose D6,0 d4,0 PUR silver AR
- 418496 S Air-operated hose D4,0 d2,8 PUR AR
Gun bracket for spray chamber size ”S”

6 7195252 Gun bracket ECC700 s compl. 1 8+9 VE,CE

18 Parts
Versa‐Spray II Automatic Spray Gun
2 3
1
7 5
9
12
11
10
Fig. 10

1 134385 Wear sleeve w/ O‐ring
2 125612 Inlet body
3 134386 Hose adapter w/ O‐ring
4 ------ S O‐ring 940163
5 140562 Hose support bracket
6 133409 SHUR-LOK gun mt
7 981708 S Screws
8 146009 Multiplier service kit, negative
8 146008 Multiplier service kit, positive
9 134376 S Resistor kit
10 ------ S S Contact 132748
11 ------ S S O‐ring 940117
12 ------ S O‐ring 940243
Cables for Connection to the Vantage Dual Control Unit
1043723 Cable, 12 meter
1054175 Cable, 16 meter

Parts 19
Versa‐Spray II Flat Spray Nozzles
2.5 mm (high flow)

4 mm (medium-low flow)
2
1 134385 wear sleeve with O‐ring
60 degree cross‐cut
90 degree cross‐cut
Fig. 11

1 174223 Nozzle, flat w/ O‐ring, glass‐filled PTFE, 1
2.5mm
2 ------ S O‐ring 2 941181
1 174227 Nozzle, flat w/ O‐ring, glass‐filled PTFE, 4mm 1
2 ------ S O‐ring 2 941181
3 134385 Wear sleeve w/ O‐ring (for flat spray nozzles) 1

1 134384 Nozzle, flat w/ O‐ring, Tivar®, 2.5mm 1
2 ------ S O‐ring 2 941181
1 141045 Nozzle, flat w/ O‐ring, Tivar®, 4mm 1
2 ------ S O‐ring 2 941181
3 134385 Wear sleeve w/ O‐ring (for flat spray nozzles) 1

20 Parts
Versa‐Spray II IPS Automatic Spray Gun - CERAMIC
7
9
8
6
3
22
5
1 4
2
20
14
13 21
10 12
11
16
15
17
18
19
Fig. 12

Parts 21

— 224877 GUN, PE, Versa‐Spray, negative, 1 8+9 CE
with conical nozzle and Shur‐Lok mount
1 245523 S DEFLECTOR, ceramic, 38 mm 1
2 945016 S S O‐RING, silicone, 0.251 x 0.400 x 0.074 1
in.
3 113931 S SLEEVE, pattern adjust 1
4 246578 S S INSERT, Pyrex 1
in.
6 112806 S S SLEEVE 1
NS 942240 S S O‐RING, hot paint, 1.750 x 2.000 x 1
0.125 in.
7 245521 S NOZZLE, powder gun, ceramic 1
8 246180 S S NOZZLE 1
in.
10 153988 S BODY, inlet, PE, Versa‐Spray 1
11 982455 S SCREW, set, M6 x 1 x 8, nylon, black 1
12 245434 S CONNECTOR, inlet, powder, ceramic 1
13 101128 S SLEEVE, ceramic 1
14 154863 S ADJUSTER, pattern sleeve, PE 1
15 154869 S SERVICE KIT, multiplier, PE, negative 1
in.
17 154963 S S SERVICE KIT, resistor 1
18 1053112 S S S CONTACT, cable 1
19 940117 S S S O‐RING, silicone, 0.312 x 0.438 x 1
0.063 in.
20 140562 S BRACKET, tube 1
21 982056 S SCREW, flat head, slotted, M3 x 6 mm, 1
zinc
22 133409 S MOUNT, gun, pivot, lock, gun bar 1
NS: Not Shown

22 Parts
Sure Coat Automatic Spray Gun (Bar‐Mount)
30
1
2
3
4
5
7 6
10
14 11
15 12
16
17
18
13 20
19
21
Fig. 13

Parts 23

- 333751 Bar mount gun, negative #
1 1010752 Electrode support, w/ O‐rings
2 940162 S O‐ring A
3 941163 S O‐ring A
4 1010562 Electrode
5 1010561 Electrode holder
6 1005028 Nozzle nut
7 940060 O‐ring A
8 327979 Multiplier gasket
9 327986 O‐ring A
10 288552 Multiplier
11 1006352 Contact
12 327706 Nut
13 1013967 Hose conn. kit, 11 mm
13 1013968 Hose conn. kit, 12.7 mm
14 1010725 S Nut
15 1010724 S Hose connector, 11 mm
15 1010726 S Hose connector, 1/2 in.
16 940156 S O‐ring A
17 1016047 Connector body
18 940203 O‐ring A
19 1009706 Powder tube
20 1020466 O‐ring A
21 340637 O‐ring A
Cables for the Vantager Controller
- 1048653 Cable, 12 meter
- 1054176 Cable, 16 meter
Kit for the Sure Coat Automatic Spray Guns
- 1010753 O‐ring kit
NOTE A: Part of O‐ring kit, part 1010753
Sure Coat Flat Spray Nozzles

30 1010661 4‐mm slot flat spray nozzle
30 1010662 2.5‐mm slot flat spray nozzle

24 Parts
Spray Chamber, Complete
w/o or remote spray chamber

ground bolt
1
1a 1b
attached spray chamber
5 2
6
4
remote spray chamber

Fig. 14

Parts 25

w/o or remote spray chamber
1a 7141758 Kit-INS inlet tube ECC70x 1 1x return 14 W,H
------ S Cover 1
7141622 S Sign Powder hose connection 1
1b 7149121 Kit-INS inlet tubes ECC70x 1 2x return 14 #
------ S Cover 1
7141622 S Sign Powder hose connection
attached spray chamber
- 7141753 Attached spray chamber (M) 1 14 R
2 7130153 S Material recirculation 1 10 1,2
3 7141720 S Spray chamber w/ safety switch 1 A

- 7153932 Attached spray chamber (L) 1 14 R
2 ------ S Material recirculation 1 10 3,4
3 ------ S Spray chamber w/ safety switch 1 A

remote spray chamber
4 7191519 Trolley ECC compl. 1 Fig.16 14 H
6 1067694 S KIT,GROUND BUS BAR,ESD,6 1
POS,W/HARDWARE
NOTE A: Inlet/outlet assembly to be ordered separately. Refer to Inlet/Outlet Assembly.
Safety Switch Kits

- - Spray chamber w/ safety switch 1
5 7137253 S Kit-SVC safety switch/spraychamber 1

7137254 S S Hinge safety switch Z410 1
------ S S Safety switch f.hinged guards 1
------ S S Control cable OELFLEX 7.3m
------ S S Conduit connection,metal M16 1
------ S S Conduit connection,metal M20 1
------ S S Sleeve housing HAN10A 10-pole 16A 1
------ S S Plug insert HAN10A 10-pole 16A 250V 1
------ S S Cable identification plate type:KMK 2
7563304 Kit-SVC safety switch/spraychamber ECC 1 10 3,4
(see Kit‐P/N 7137253 w/o P/N 7137254)

26 Parts
Attached Spray Chamber
Fluid Plates
Fig. 15

1 - Material recirculation (spray chamber ”M”) 1 14 R
10 1,2
2 7130165 S Fluid plate 1

1 - Material recirculation (spray chamber ”L”) 1 14 R
10 3,4

Parts 27
Remote Spray Chamber
mounting positions

28 Parts
Remote Spray Chamber (Contd.)
new trolley funnel mounting
use angle brackets

only with old trolleys
1
Fig. 16

1 7191519 Trolley ECC compl. 1 14 H
2 7153568 Spray chamber ECC white (S) 1 special 10 1,2
3 7132818 Spraychamber ECC window CP ID80 M 1 10 1,2
- 7137483 S Spray chamber ECC white w/insp. 1
- 7141720 S S Spray chamber w/ safety switch 1
- 7130692 S Cable in out CP ID 80 ECC701 2 Fig. 19
4 7168224 Spraychamber ECC window CP ID80 L 1 10 3,4
- 7130712 S Spray chamber ECC white w/insp. 1 Ğ125
- 7130692 S Cable in out CP ID 80 ECC701 2 Fig. 19
- 7180354 Trolley w/spraychamber ECC CP IO 180 mm 1
(incl. P/N 7191460 iris valve AD8)
1 7191519 S Trolley ECC compl. 1
- 7191424 S Spray chamber ECC 1 Ğ200

Parts 29
Screen Cloth
Fig. 17

- - Spray chamber 1 14 H
1 7130034 S Screen cloth 1
Casters

- 419575 Swivel caster F=180kg/D100/B34/H125 2 14 H
- 419576 Rigid caster F=180KG/D100/B34/H125 2
- 254683 Allan head cap screw M8x20 DIN912 16
- 256853 Washer D8,4 DIN125 type B SST 16
- 416898 Hexagon nut M8 DIN439 B 16

30 Parts
Inlet/Outlet Assemblies
Variation I
Variation II
5
Variation III
1
3
Fig. 18 Spray chamber P/N 7141720

Variation II - Size Ğ 125 mm
4 Iris valve 2 19,23 V
20,24 V
Variation II - Size Ğ180 mm
4 7195227 Iris valve AD8 (7191460) 2 19,23 W
20,24 W

Parts 31
Connecting Branches
Replacement
1 1
2 2
Fig. 19

Variation I - Size Ğ80 mm (D80) - Standard -
1 7130186 Adapter 3/4 2 7130126* 19,23 S

7130205 Adapter 1/4 2 7130127* 20,24 S
2 7130192 Replaced by - 7130036*
7130834 Connecting branch 3/4 2
7130208 Replaced by - 7130041*
Variation I - Size Ğ100 mm (D100)
1 7130185 Adapter 3/4 2 19,23 M
7130204 Adapter 1/4 2 20,24 M
2 7130191 Replaced by -
7130207 Replaced by -
Variation I - Size Ğ125 mm (D125)
2 7130190 Replaced by - 19,23 L
7130878 Connecting branch 3/4 2 20,24 L
7130206 Replaced by -
* Parts belong to old P/N 7137494

32 Parts
Connecting Branch Kits

Fig. 19 7130692 Cable in out CP ID 80 ECC701 1 19,23 S
20,24 S
1 7130186 S Adapter 3/4 1
1 7130205 S Adapter 1/4 1
2 7130834 S Connecting branch 3/4 1
- 7130174 S Pan head screw M6x16 PA 24
Fig. 19 7130693 Cable in out CP ID 100 ECC701 1 19,23 M
1 7130185 S Adapter 3/4 1 20,24 M
1 7130204 S Adapter 1/4 1

Fig. 19 7130694 Cable in out CP ID 125 ECC701 1 19,23 L
2 7130190 S Connecting branch 3/4 1 20,24 L

Rubber Lids
Fig. 20

Variation III - Size Ğ 125 mm (D125)
3 7130187 Rubber lid 4 19,23 R
5 7130182 Clamp ring 3/4 2 20,24
7130200 Clamp ring 1/4 2

Parts 33
Spray Chamber with Rectangular In‐ / Outlet: 150 x 50
Fig. 21 P/N 7130142

- 7130142 Spray chamber ECC701 150x50 1 #
- 7130143 S Spray chamber 150x50 1

- 7130144 S Spray chamber,flaps 150x50 1
- 398164 S Locking cover,spray chamber ECC700 3
compl
- 398165 S Cover,spray chamber ECC700 compl. 3
- 7137255 S Safety switch f.hinged guards 1
- 7137254 S Hinge safety switch Z410 1
- 398145 S Locking jig,spray chamber ECC700 2
1 7130152 S Passage kit 150x50 2
- 7130151 S Cablefeed through disk unperforat 2
150x50

34 Parts
Recirculation
B A C
Fig. 22
A
2
5
1
4 7
3 6
Fig. 23

Parts 35

A 7144236 KIT 90deg. w/ recirculation pump 1 Fig. 23 21 3
4 ------ S Flange 90° spraychamber powderoutlet 1 25 3
5 7130051 S Panhead screw M6x20 PA acc.DIN 84 6
3 ------ S EJECTOR,RET 1
6 ------ S Hose clamp D32-50 DIN3017 2
1 789497 S Hose,ret,dia 40mm ECC PU clear 6m
2 788669 S Air hose D6,0 d4,0 PUR blue 6m
7 7141621 S Sign Air pressure regulator “Recirc.pump” 1
- ------ S Fitting -W-D06-R1/8-TURN - replaces 1
fitting D08 that comes with ejector
- ------ S Plug-type thread fitting -G-D06-D06-BHD 1
B 7168220 Kit-INST 90deg spraych. ECC70x w/o hose 1 Fig. 22 21 2

------ S Flange 90 deg 1 25 2
------ S Panhead screw M6x20 PA-acc.DIN 84 6
7148377 KIT 90deg. w/o recirculation pump 1 Fig. 22 21 2
B ------ S Flange 90 deg 1 25 2
------ S Panhead screw M6x20 PA acc.DIN 84 6
789497 S Hose, dia 40mm PU clear 6m
------ S Hose clamp D32-50 DIN3017 2
C 7132859 Kit-INST tubing air/1spray chamber ECC 1 Fig. 22 21 1
------ S Flange D40 1 25 1
------ S Hose clamp D32-50 DIN3017 2
C 7128853 Kit-INST tubing air/2spray chamber ECC 1 Fig. 22 21,25 1
------ S Flange D40 2 22 ≠0
------ S Hose clamp D32-50 DIN3017 4

36 Parts
Powder Pumps
KIT Powder Pump Ceramic w/ Pump, Standard‐Flow, 8 mm
1 3
Fig. 24
Item P/N Description Quantity Note Box Code

- 7137252 KIT POWDER PUMP CERAMIC 1 15 C
1 327742 S PUMP, STD-FLOW, 8MM 1
3 114223 S S THROAT, VENTURI, 1
STAINLESS STEEL
3 1064256 S THROAT,VENTURI, STANDARD FLOW,
SMART
3 114219 S THROAT, VENTURI, TIVAR®, LO-FLO 1
2 7149160 S Plug-type fitting QS-8H-6 2
- 7114984 S Adapter, pump, low flow (standard flow) 1 Fig.48
4 635923 S S O-Ring 22x2,5 Viton 2
NS 900724 S Tubing, Polyurethane,.485 5.5m
Adapter, pump, high flow

- 7114984 Adapter, pump, low flow (standard flow) Fig.48
- 7149118 S Adapter, pump, high‐flow Fig.48

- 7168062 Kit-INST pump abrasive powder ECC70x 1 Fig.24 15 C
1 327742 S PUMP,PDR,STD-FLOW,8MM,PKG 1
3 114219 S THROAT,VENTURI,TIVAR,LO-FLO 1
3 114223 S THROAT,VENTURI,ST 1
2 7149160 S Plug-type fitting QS-8H-6 2

Parts 37
O‐Rings / Wear Parts for Pump P/N 327742
1
3
4
1
5
2 6
7
4
5
8
9
10
11
12
Fig. 25

— 327742 PUMP, powder, standard‐flow, metric, 8 mm, 1
packaged
1 972276 S ELBOW, male, 8‐mm tube x 1/8 in. 2

unithread
2 248124 S MARKER, clip, F 1
3 248046 S MARKER, clip, A 1
4 249503 S NOZZLE, air, venturi, 0.063‐in. ID 2
5 940129 S O‐RING, silicone, conductive, 0.375 x 4
0.50 x 0.063 in.
6 249502 S HOUSING, pump, powder 1
7 973402 S PLUG, pipe, socket, flush, 1/8 in., zinc 1
8 1064256 S THROAT, venturi, SMARTt 1 A
0.75 x 0.063 in.
10 249506 S HOLDER, throat 1
0.875 x 0.063 in.
12 249507 S TUBE, wear, holder 1
NOTE A: This throat does not require O‐rings and retaining ring

38 Parts
KIT Powder Pump Ceramic w/ Pump, Metric, 6 mm (Obsolete)
inside ECC
1 adapter hose
Fig. 26 Tivar® is a registered Tradmark of Quadrant Engineering Plastic Products

- 7137252 KIT Powder pump ceramic 1 6 mm 15 C
1 165636 S Pump, powder, metric, 6 mm 1 A
3 114219 S Throat, Venturi, Tivar®, low flow 1
3 114223 S Throat, Venturi, stainless steel, std. flow 1
- 900724 S Tubing, Polyurethane,.485 5.5m
- 7114984 S Adapter,pump low/high flow cpl. 1
4 635923 S S O‐ring 22x2,5 Viton 2
NOTE A: PUMP, POWDER, METRIC, 6MM (until 12/10): Order KIT P/N 7168073 for replacement

- 7168073 Kit-SVC pump abrasive powder ECC70x new 1 B 15 C
- 7168062 S Kit-INST pump abrasive powder ECC70x 1 15 C

1 327742 S S PUMP,PDR,STD-FLOW,8MM,PKG 1 Fig.24
3 114219 S S THROAT,VENTURI,TIVAR,LO-FLO 1
3 114223 S S THROAT,VENTURI,ST 1
- 7149160 S S Plug-type fitting QS-8H-6 2 2, Fig.24
NOTE B:P/N 7114984 must also be ordered if the existing pump adapter is made of plastic.

Parts 39
O‐Rings / Wear Parts for Obsolete Pump P/N 165636 (Ceramic)
1
3
4
1
5
2 6
7
4
5
8
9
10
11
12
Fig. 27

— 165636 PUMP, powder, standard‐flow, metric, 6 mm, 1 obsolete 15 C
packaged
1 972126 S ELBOW, male, 6‐mm tube x 1/8 in. 2

unithread
2 939109 S MARKER, clip, F 1
3 939108 S MARKER, clip, A 1
4 249503 S NOZZLE, air, venturi, 0.063‐in. ID 2
0.50 x 0.063 in.
6 249502 S HOUSING, pump, powder 1
7 973402 S PLUG, pipe, socket, flush, 1/ in.,
8 zinc 1
8 1064256 S THROAT, venturi, SMARTt 1 A
Fig.30
0.75 x 0.063 in.
10 249506 S HOLDER, throat 1
0.875 x 0.063 in.
12 249507 S TUBE, wear, holder 1
NOTE A: This throat does not require O‐rings and retaining ring

40 Parts
KIT Powder Pump low & medium flow w/ Pump, Modular, 6 mm (Obsolete)
P/N 224713
inside ECC
1 adapter hose
4
Fig. 28

- 7137097 KIT Powder pump low & medium flow 1 15 N
2 224713 S Pump, powder, modular, 6 mm 1 A
- 900724 S Tubing, Polyurethane,.485 5.5m
- 7114984 S Adapter,pump low/high flow cpl 1
4 635923 S S O‐ring 22x2,5 Viton 2
NOTE A: PUMP, MODULAR, 6MM (until 11/08): Order KIT P/N 7168072 for replacement

- 7168072 Kit-SVC Repl.Modular pump ECC70x low fl. 1 6 mm
- 7168062 S Kit-INST pump abrasive powder ECC70x 1

1 327742 S S PUMP,PDR,STD-FLOW,8MM,PKG 1 Fig.24
3 114219 S S THROAT,VENTURI,TIVAR,LO-FLO 1
3 114223 S S THROAT,VENTURI,ST 1
2 7149160 S S Plug-type fitting QS-8H-6 2 Fig.24
- 7114984 S Adapter,pump low/high flow cpl 1
4 635923 S S O-Ring 22x2,5 Viton 2
- 900724 Tubing, Polyurethane,.485 as required

Parts 41
O‐Rings / Wear Parts for Obsolete Pump P/N 224713 (Low & Medium Flow)
1 2 3
6
7
10 11 9 12
8
13
4 5 2
Fig. 29

- 224713 Pump, powder, modular, 6 mm 1 obsolete 15 N
1 224733 S Atomizing air nozzle
2 940129 S O‐ring, conductive
2 340636 S O‐ring, non‐conductive A
3 940010 S O‐ring, conductive B
4 224727 S Flow air nozzle
5 940207 S O‐ring, conductive B
6 224726 S Pump body
7 225547 S Throat, 0.188in.ID, Tivar®, w/ O‐rings C
8 940126 S S O‐ring
9 224728 S Throat holder
10 940015 S O‐ring, conductive
10 340637 S O‐ring, non‐conductive A
11 940177 S O‐ring, silicone, conductive B
12 224736 S Wear tube
13 972126 S Elbow, male, 6 mm tube
Optional Venturi Throats with O‐rings
7 225548 Throat, 0.213in.ID, PTFE D, E
7 225546 Throat, 0.213in.ID, Tivar® E
7 225549 Throat, 0.188in.ID, PTFE D
NOTE A: Optional O‐ring, provides better retention of nozzle and throat holder. Other O‐ring on nozzle and holder
MUST be black conductive silicone to ensure proper grounding.
B: Electrically conductive black silicone. Do not replace with non‐conductive O‐rings.
C: Standard Venturi throat.
D: PTFE is more resistant to powder impact fusion than Tivar® but may wear faster.
E: Larger ID throats are used for special applications, such as high flows with short hose runs. Refer to
manual for more information.

42 Parts
Venturi Throats Selection

3
10
9
Fig. 30

Optional Venturi Throats - for Standard Flow
3 ------ Throat, Venturi 1
9 940126 S O‐ring 2
10 986100 S Retaining ring 1
3 249504 PTFE 1 A
3 174215 Glass‐filled PTFE 1 B
3 114223 Stainless steel 1 C
3 114221 Tivar® 1 D
3 1064256 Smartt 1 E
NOTE A: May exhibit less impact fusion with certain powder materials, but has a shorter wear life.
B: May exhibit better wear life than a PTFE throat, and less impact fusion than a Tivar® throat.
C: Used in special applications with non‐paint powdered materials.
D: May exhibit better wear life, but more impact fusion than a PTFE throat.
E: Smartt Venturi throats do not require O‐rings and retaining ring (items 9 and 10).

Optional Venturi Throats - for Low Flow
3 109101 PTFE 1 A
3 174213 Glass‐filled PTFE 1 B
3 114219 Tivar® 1 C
3 1064257 Smartt 1 D
NOTE A: May exhibit less impact fusion with certain powder materials, but has a shorter wear life.
B: May exhibit better wear life than a PTFE throat, and less impact fusion than a Tivar® throat.
C: May exhibit better wear life, but more impact fusion than a PTFE throat.
D: Smartt Venturi throats do not require O‐rings and retaining ring
Smart Venturi Throats Replacements

Standard‐Flow (blue) P/N 1064256 replaces
S P/N 114221 (Tivar®)
S P/N 249504 (PTFE)
Low‐Flow (red) P/N 1064257 replaces

S P/N 114219 (Tivar®)
S P/N 109101 (PTFE)

Parts 43
Powder Recirculation Pump
6
1
2
3
Fig. 31

- 634740 Ejector, RET 40mm 1
1 ------ S Housing pump 1
2 ------ S Spacer 1
3 ------ S Connector 1
4 ------ S Fitting -W-D08-R1/8-TURN 1
5 311511 S O‐ring 28,24x2,62 2
6 783326 S O‐ring 25x2 Viton 2
Kit-INST Diaphragm Pressure Regulator (2 Powder Recirc. Pumps)
Fig. 32 P/N 7149315

- 7149315 Kit-INST Diaphragm Pressure Reg. 1
- 7555799 Kit-INST Booster recirc, pump ECC701 1 A
NOTE A: Upgrades Kit 7149315 to third regulator with ejector 634740 (Fig. 31) incl. powder hose, dia 40mm PU
clear and air hose D8,0 d5,7 PUR silver

44 Parts
Engineered Tribomatic
for details refer to gun manual
10
3
spray chamber
see Fig.16
Fig. 33

- 7141757 Kit-INST Tribomatic gun 1
1 634713 S CHARGETUBE, TI, 3 TUBE NYLON 1
500MM
2 638882 S SPRAYHEAD,4T,ADJ.LENGTH,NYLON 1
3 7114641 S Locking cover,spray chamber cpl 2 Fig. 33
4 424040 S CONDUIT CONNECTION,PLASTIC PG9 4
- 7141759 S Kit-INST Tribo chargetube 1
5 635005 S S DIFFUSER,GEN.3 1
6 630011 S S SPACER COMPL. TI, 82MM 1
7 630013 S S NUT,RING,SPACER 1
8 630021 S S HOLDER, GUN, ADJ.,RIGHT HAL 1
9 1054613 S ADAPTER,TRIBO,VANTAGE AUTO 1
10 398165 S Cover,spray chamber ECC70x compl. 2 Fig. 33

Parts 45
Tribomatic Pump
ÏÏ ÏÏ
ÏÏ ÏÏ
2
ÏÏ ÏÏ
ÏÏ ÏÏ
ÏÏ
ÏÏ ÏÏ
ÏÏ
1
ÏÏ ÏÏ
M20x1.5
Fig. 34

- 7137322 Kit-INST pump Tribo ECC70x 1 15 # (T)
1 224715 S PUMP,MODULAR,TRIBO,PACKAGED 1 A
- 233449 S THROAT,.188 DIA,SS,PACKAGED 1
- 900724 S TUBING,POLYURETHANE,.485 6m
2 398191 S Adapter, pump ECC700 1 B
3 398192 S Adapter bracket ECC700 1 B
NOTE A: Can be replaced by P/N 631401 (Fig. 35)

B: Part of adapter P/N 7114984

- 7114984 Adapter,pump low/high flow cpl 1
2 398191 S Adapter pump ECC700 1

3 398192 S Adapter bracket ECC700 1
- 635923 S O-RING 22X2, 5 2
- 7130308 S Lock washer DIN6797 A 21 A2 1
- 259219 S Hexagon nut M20x1,5 DIN439 B 1

46 Parts
Tribomatic Pump II
1
2
3
5
6
7
10
Fig. 35
Item Part Description Quantity Note

— 631401 Pump, Tribomatic II, single 1
1 972126 S Elbow, male, 6 mm tube x 1/8 universal 1
thread
2 631420 S Nozzle, air, 0.073 in. ID 1
3 940129 S O‐ring, silicone, conductive, 0.375 x 0.500 2
in.
4 635004 S Housing, pump, generation 3 1
5 635001 S Throat, venturi, generation 3, PTFE 1 A
6 940126 S S O‐ring, silicone, 0.375 x 0.500 x 0.063 in. 2
7 635003 S Holder, throat, generation 3 1
8 940165 S O‐ring, silicone, conductive, 0.625 x 0.750 2
in.
9 139943 S Connector, pump, powder 1
10 249507 S Tube, wear, holder 1 B
NOTE A: Bulk quantities of this part are available. Refer to Bulk Venturi Throats.
B: Use this wear tube holder in place of item 9 when using 1/2‐in. ID powder feed tubing.
Bulk Venturi Throats

631405 Throat, Tribomatic II, PTFE, 10 pack
631409 Throat, Tribomatic II, Tivar, 10 pack

Parts 47
Service and Accessory Kits
Hoses & Tubings
Powder
(Lifetime depends on powder type)

- 789497 Hose, dia 40mm PU clear 6m
- 900724 Tubing, Polyurethane,.485 5.5 m A
- 768178 Hose, anti-static, 12.7mm ID x 2.75mm 6m B
NOTE A: For Talcum and SAP
B: With internal copper wire (impact fusion in the hose will be avoided)
Use hose in combination with 100+ pumps
Air

- 7149159 Air hose D12,0 d8,0 PUR blue AR
- 289009 Air hose D8,0 d5,7 PUR silver AR
- 788670 Air hose D6,0 d4,0 PUR black AR
AR: as required

48 Parts
Refill hopper (Feed Hopper) - HR
2
Lid Gasket 5
3
4
Fill/Inspection Lids
1
Fludizing Plate
7
6
Fig. 36 Replaced by model NHR

- 1001967 KIT Refill hopper (feed hopper) 1
- 163568 S Hopper, packaged, HR‐2‐80 1
- 165633 S Pump, transfer 1
- 1072226 S Dolly assembly, 3-wheel 1
Item Part Description

HR‐ Fill/Inspection Lid
1 237196 Service kit, fill/inspection lid assembly
2 237004 S Latch, fill/inspection lid
3 237006 S Gasket, latch
4 1074469 S Gasket, fill/inspection lid
HR‐ Lid Gasket
5 144818 Service kit, hopper lid gasket (includes 900491 adhesive)
- 144820 S Gasket, lid
HR‐ Fluidizing Plate
6 104168 Fluidizing plate
7 104181 Gasket, U‐channel

Parts 49
Refill hopper (Feed Hopper) - NHR
1
8
9
7
3
10
Fig. 37

- 1001967 KIT Refill w/hopper 1
- 1074573 S Hopper, packaged, NHR‐2‐80 1
1 1074532 S S Lid, hopper, packaged, 2‐pump
2 1070199 S S Plug, hopper fill, NHR
3 1074338 S S Body, hopper, NHR, assy, 80
packaged
4 1070232 S Fluidizing plate
5 1070234 S Gasket, U‐channel
6 1074531 S Drum, fluidizing 1070195
7 163556 S Tube, pickup, 80 lb packaged

- 165633 S Pump, transfer 1 Fig.38
- 1072226 S Dolly assembly, 3-wheel 1
8 1074539 SERVICE KIT Gasket lid 1
9 941185 O‐Ring, conductive, 0.875 x 1.062 in. 2
10 941145 O‐Ring, conductive, 0.625 x 0.812 in. 2

50 Parts
Metric Powder Transfer Pump
2
10
5
4
6
7 8
Fig. 38

- 165633 Pump, transfer, 10 mm in, 19 mm out 1
1 244643 Air nozzle 1
2 942106 O‐ring, conductive 1
3 307439 Kit, throat w/ holder 1
4 307437 S Tivar® throat w/ O‐rings 1
5 940142 S S O‐ring 2
6 942106 S O‐rings, conductive 2
7 307435 S Holder, throat 1
8 118832 S Wear sleeve 1
10 972125 Elbow, 10‐mm tube 1

Parts 51
Transformer 400V / 230V
1
2
Fig. 39

- 7153123 Kit-INST Trafo 400VAC 3Ph Δ ECC701 1 12 C
10 1,2
1 7114999 S Assembly plate 1
2 260814 S Transformer 400V/230V 1000VA 1
- 254682 S Allan head cap screw M6x12 DIN912 4
- 250095 S Washer D6,4 DIN125 4

2 260814 Transformer 400V/230V 1000VA 1 12 C
(without box) 10 3,4
Transformer 480V / 230V

- 1087087 TRANFORMER,ECC701,480 / 240V 3PH,3K 1 USA only

52 Parts

Parts 53
Cable Cleaning Exhaust
Replacement of
items 1 to 5
3
4
2 5 See Fig.41
10
9
11
12
13
14
17
16
15
7
6,8
Fig. 40
Item Part Description Quantity Note

- 7130056 Cable cleaning exhaust 40 mm compl. 1 Order P/N 7130091 for
max. wire dia. 30 mm replacement of items 1 to 5
- 7130309 Cable cleaning exhaust 100 mm compl. 1 Order P/N 7130310 for
max. wire dia. 80 mm replacement of items 1 to 5

54 Parts
Cable Cleaning Exhaust - Replacement
3
1
4
2
22
9 10
21 11
12
18
13
14
20
17
16
15
7
6,8
19
Fig. 41

Parts 55

- 7130056 Cable cleaning exhaust 40 mm compl. 1
max. wire dia. 30 mm
1 ------ S Suction pipe 1
2 ------ S Suction tube 1
3 ------ S Silicone cover 1 7130077
4 ------ S Flange 1
5 7130051 S Pan head screw M6x20 PA 3
7 7140599 S Pressure gauge 0-6bar G1/8-back D40 1
8 410878 S Fitting-G-D08-R1/8- 0000 2
9 289710 S Hose clamp D32-50 DIN3017 2
10 789497 S Hose, dia 40mm PU clear 6m
11 634740 S Ejector, RET 40mm 1
- 311511 S S O‐ring 28,24x2,62 2
- 783326 S S O‐ring 25x2 Viton 2
12 ------ S Hopper pump adapter 1
13 ------ S Lock washer DIN6797 A 21 A2 1
14 ------ S Hexagon nut M20x1,5 DIN439 B 1
15 289009 S Air hose D8,0 d5,7 PUR silver 2m
16 784883 S Fitting -T-D08-D08- CONN 1
17 - S not used -
18 7130361 S Clamping flange inside; Di80 1
19 7130881 S Spacer Di 80 mm 1
20 7130880 S Clamping flange outside; Di80 1
21 254680 S Allan head cap screw M5x25 DIN912 2
SST
22 7130885 S Pan head screw M6x35 PA-nature 3
acc.DIN84

56 Parts
3
1
4
2
22
9 10
21 11
12
18
13
14
20
17
16
15
7
6,8
19

Parts 57

- 7130309 Cable cleaning exhaust 100 mm compl. 1
max. wire dia. 80 mm
1 ------ S Suction pipe 1
2 ------ S Suction tube 1
3 7130188 S Rubber cover D100 1
4 ------ S Flange 1
5 7130051 S Pan head screw M6x20 PA 6
7 7140599 S Pressure gauge 0-6bar G1/8-back D40 1
8 410878 S Fitting-G-D08-R1/8- 0000 2
9 289710 S Hose clamp D32-50 DIN3017 2
10 789497 S Hose, dia 40mm PU clear 6m
11 634740 S Ejector, RET 40mm 1
- 311511 S S O‐ring 28,24x2,62 2
- 783326 S S O‐ring 25x2 Viton 2
12 ------ S Hopper pump adapter 1
13 ------ S Lock washer DIN6797 A 21 A2 1
14 ------ S Hexagon nut M20x1,5 DIN934 1
15 289009 S Air hose D8,0 d5,7 PUR silver 2m
16 784883 S Fitting -T-D08-D08- CONN 1
17 ------ S Mounting bracket 1
18 7130887 S Clamping flange in., Di125 1
19 7130888 S Spacer Di125 1
20 7130886 S Clamping flange out Di125 1
SST
acc.DIN84

58 Parts
Reduced Powder Contact
8
9
1 7
13 10,11
12 3
2
4
Fig. 42 7153482

Parts 59

- 7153482 KIT INS Reduced Powder Contact 1
1 7130364 S Shield pipe 2
7130362 S S Filter half pipe 2
3 7130361 S Clamping flange 2
4 412416 S Screw plug R1/8 DIN908 SST 2
5 317824 S Non-return restrictor valve GRLA-1/8-B 2
267422 S Double nipple aR1/8-aR1/8 L27 NW6 2
413534 S Fitting iRp1/8-iRp1/8 L15 2
400003 S Plug-type thread-in ftg.-G-D06-R1/8-0000 2
6 418507 S Plug-type thread fitting 2
-Y-D06-D06-CONN
7 447850 S Air hose D6,0 d4,0 red 2m

8 448456 S Plug-type thread fitting -G-D06-D06-BHD 1
9 7130366 S Locking cover,spray chamber ECC700 1
compl

SST
11 255264 S Washer D5,3 DIN125 type A 4

12 7130881 S Spacer Di 80 mm 2
13 7130880 S Clamping flange outside Di80 2

60 Parts
Powder Flow Monitoring (PFM)
Standard SAP Min/Max
Fig. 43
- 7114898 KIT PFM (Powder Flow Monitoring) 1 13 P
1 398276 S Inline‐current controller (sensor) 1

2 398277 S Connection cable (sensor to monitoring) 1
3 7114430 S Flow rate monitoring Min 1 Standard
- 7159564 KIT PFM (Powder Flow Monitoring) 1 13 #
3 7161539 S Flow rate monitoring Min 1 SAP

Parts 61
Powder Flow Monitoring w/ 2 Potentiometers

- 7149666 KIT PFM-min/max 1 13 #

3 7163905 S Flow rate monitoring Min / Max 1
- 7132934 Kit-INST PFC ECC701 1 13 #
3 7137098 S Recognition unit,flow switch Min_Max 1
Kit Interface XS2
1
4
Fig. 44

- 7158978 Interface XS2 Kit 1
1 ------ S Bush housing HAN32A 32-pole 16A M25 1
2 ------ S Plug insert HAN16A 16-pole 16A 250V 1
3 ------ S Plug insert HAN32A 16-pole 16A 250V 1
4 ------ S Conduit connection,metal M25 1
- ------ S Wire (jumper) 10 A
NOTE A: Place the wire jumpers as shown in the wiring diagram and according to the specification of the cable
coater

62 Parts
Kit Key‐To‐Line
manual
automatic
Fig. 45

Fig. 45 7141163 Kit-INST pneumatic Key to Line ECC701 1 manual 16+17 KC,KX
- on Kit-INST 1 auto
request

Parts 63
Kit Filter Cleaning
13
13 2x
Fig. 46 P/N 398447

- 7163345 Kit-SVC filter lamellar cleaning P/N 398447 1 Fig.3
- ------ S Spacer, lamellar cleaning 2
- ------ S Fitting, lamellar cleaning 2
13 ------ S Grooved ball bearing 4
- ------ S Circlip bore D42 DIN472 4
- ------ S Circlip shafts D20 DIN471 4
- ------ S Allan head cap screw M4x35 DIN912 4
- ------ S Allan head cap screw M5x12 DIN912 8

64 Parts
Standard (Low Flow) Volume Kit / High Volume Kit
Fig. 47

- 398692 High volume kit 1
- 7149061 Standard volume kit 1
Pump Adapter, Standard (Low Flow) / High Flow
Standard (low flow)
1 inside ECC
High flow
2
pump adapter hose
Fig. 48

1 7114984 Adapter, pump, low flow (standard flow)
2 7149118 S Adapter, pump, high‐flow

Parts 65
Hinges, Handles, Turnbuckles and Keys
Fig. 49

1 398067 Turnbuckle w/tongue 1
253145 Two-way key no.5 1
2 402423 Turnbuckle w/tongue 1
264518 Key 8mm-square type:A 1
3 398072 Handle, compl. 1
4 398064 Hinge, complete 1 for all
doors

66 Parts
Filter Screen
3,4
To be ordered separately

- 7170490 Service kit (for sieve drawer 7130215)
1 ------ S Filter screen 1
2 ------ S Lock 2
3 ------ S Cartridge gun 1
4 ------ S Sealant Sikaflex 1

5 7115937 Bow-type handle 1
6 7134341 Allan head cap screw M5x12 2

Parts 67
Star Grip Replacement (Filter Cover)
star grip
clamp with lever
Fig. 50

- 7170791 Service Kit 1 A
NOTE A. Lid (1, Fig. 50) will be reused.

68 Parts
Filter Cleaning Parts (Star Grips) - OLD

12
13 11b
11a
13
12
11
4
4
OLD: Beater on the back NEW: Beater on top (Standard > 01/2010)
Fig. 51

4 7149102 S Filter compl. - replaces 789639 1
398038 S S S Pneumatic cylinder Beater 2
398025 S S Main filter cassette - replaced by 2
7198475
395593 S S Star grip D50 AM10 L40 2
398024 S S Star grip D40 aM8 L40 4
11a 7149107 S Filter 1 cover - replaces 398446 1
11b 7149105 S Filter 2 cover - replaces 7149109 1
12 398038 S S S Pneumatic cylinder Blocking flap 2
13 398519 S S S Grooved ball bearing 4
Main Filter Cassette Seals

- 7153690 KIT Seals (& instruction sheet) 1 4, Fig.3
- ------ S Seal, 5 mm 4
(for air intake AND clean air side)
Filter Cleaning Upgrade

- 7155639 KIT Retrofitting OLD-NEW & Maintenance (& 1 A
instruction sheet)
- 7163345 Kit-SVC filter lamellar cleaning P/N 398447 1 Fig. 46
NOTE A: P/N 7163345 to be ordered separately

06

Uploaded by

Copyright:

Available Formats

06

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

06

Uploaded by

Copyright:

Available Formats

Electrostatic Cable Coater

NORDSON ENGINEERING GMBH D LÜNEBURG D GERMANY

 2016 All rights reserved.

P/N 7135883_06 ECC701 E 2016 Nordson Corporation

E 2016 Nordson Corporation ECC701 P/N 7135883_06

Service and Accessory Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

P/N 7135883_06 ECC701 E 2016 Nordson Corporation

How to Use Illustrated Parts List

Item— Identifies parts that can be obtained from Nordson.

NS: Not Shown

Tivar® is a registered Tradmark of Quadrant Engineering Plastic Products

E 2016 Nordson Corporation ECC701 P/N 7135883_06

Configuration Code - Obsolete

P/N 7135883_06 ECC701 E 2016 Nordson Corporation

Configuration Code - Beginning 2016

Box Code Components / parts

E 2016 Nordson Corporation ECC701 P/N 7135883_06

P/N 7135883_06 ECC701 E 2016 Nordson Corporation

E 2016 Nordson Corporation ECC701 P/N 7135883_06

Cable Coater, Complete

P/N 7135883_06 ECC701 E 2016 Nordson Corporation

Item Part Description Quantity Note Box Code

Item Part Description Quantity Note Box Code

E 2016 Nordson Corporation ECC701 P/N 7135883_06

P/N 7135883_06 ECC701 E 2016 Nordson Corporation

Item Part Description Quantity Note Box Code

Item Part Description Quantity Note Box Code

E 2016 Nordson Corporation ECC701 P/N 7135883_06

Filter Cleaning Parts

Item Part Description Quantity Note Box Code

Main Filter Cassette Seals

P/N 7135883_06 ECC701 E 2016 Nordson Corporation

Air Pressure Regulators Hopper & Attached Spray Chamber

Fig. 4 ECC front

Item Part Description Quantity Note Box Code

Air Pressure Regulators Vantage Controller and Filter Cleaning - Inside -

E 2016 Nordson Corporation ECC701 P/N 7135883_06

Item Part Description Quantity Note Box Code

Item Part Description Quantity Note Box Code

P/N 7135883_06 ECC701 E 2016 Nordson Corporation

Side Channel Blower

Fig. 6 Side channel blower (from the manufacturer's manual)

Item Part Description Quantity Note Box Code

Item Part Description Quantity Note Box Code

E 2016 Nordson Corporation ECC701 P/N 7135883_06

Vantage Dual‐Gun Controller

Fig. 7 Vantager dual‐gun control system

P/N 7135883_06 ECC701 E 2016 Nordson Corporation

Item Part Description Quantity Note Box Code

Information on Sure Coat Gun Operation

P/N 400193 P/N 288822

E 2016 Nordson Corporation ECC701 P/N 7135883_06

Spray Gun Kits

Item Part Description Quantity Note Box Code

Item Part Description Quantity Note Box Code

P/N 7135883_06 ECC701 E 2016 Nordson Corporation

Item Part Description Quantity Note Box Code

Item Part Description Quantity Note Box Code

Item Part Description Quantity Note Box Code