Datasheet

AVIAT WTM 3200

All outdoor packet radio system
Efficient Microwave Networking for Space and Power Restricted Sites

The Aviat WTM 3200 is an advanced all outdoor packet radio

featuring an advanced Carrier Ethernet switch and highly
scalable microwave transport platform. Equipped with QPSK to
1024 QAM modulation in frequency bands from 6 to 42 GHz, the
WTM 3200 supports throughput rates up 1 Gbit/s. Low power
consumption (<35 Watts) and simplified cabling ensures the
WTM 3200 maximizes installation, operations and maintenance
efficiency at small sites.

Flexible Radio Performance & Low Power Consumption Key Features

The Aviat WTM 3200 delivers high system gain, low power consumption and Adaptive • Highly scalable Ethernet throughput
Modulation steps from QPSK to 1024 QAM. This combination enables maximum up to 500 Mbit/s (single channel) or
flexibility for radio network planning and ensures minimal energy costs. In addition, 1Gbit/s (dual channel)
features such as Radio Link Aggregation and IF combing (space diversity) further
• Complete Adaptive Modulation range:
enhance microwave networking performance and flexibility.
QPSK and 16, 32, 64, 128, 512 and
1024 QAM
Efficient Installation and Configuration
The WTM 3200 uses in-line power injectors (PoE) to support zero footprint deployment, • Low power consumption (<35
quick installation and low operation and maintenance costs. Network efficiency is fur- Watts) for maximum site energy
ther enhanced for ring sites where the WTM 3200’s East/West configuration eliminates consumption
the need for an external (indoor) switch to manage ring protection. Rapid deployment • Single cable (Cat5e) connection with
of the WTM 3200 is achieved using ePortal, an embedded and user-friendly browser PoE for fast efficient installation
based configuration and management tool.
• Multiple link configurations including
Networks and Applications 1+0, 1+1 HSB/SD, 2+0 , XPIC and East/
West
The WTM 3200 compliments Aviat Network’s all-indoor and split-mount microwave
networking portfolio. It provides an optimized solution for operators that face the • RF optimization including Adaptive
challenge of extending their networks to increasingly small all-outdoor sites in order modulation, XPIC, Radio Link
to serve the growing demand for IP-based applications and services. Deployment Aggregation and IF Combining for
scenarios for the WTM 3200 include: Space Diversity configurations

- Mobile RAN networks: Backhaul for access sites with 3/4G base-stations • Full range of licensed frequencies
from 6 to 42 GHz, supporting 7, 14, 28,
- Rural and urban xDSL networks: High capacity connections to micro exchanges 40 and 56 MHZ (ETSI) channels
- Fixed line access networks: Broadband connections for enterprise customers • Zero-footprint, environmentally-
- Electric SmartGrid networks: Sub-station interconnect hardened (IP65) outdoor housing

- Public safety and security networks: Tetra radio backhaul and border • Full Carrier Ethernet feature set
sites access including Quality of Service (QoS),
Traffic Policing and Scheduling, VLAN
- Oil and gas networks: High capacity connections to field and pipeline support and Ethernet OAM (MEF 9
infrastructure and 14 compliant).

• Management support by Aviat ePortal

Interoperabilit y and Securit y
for link and terminal level access.
The WTM 3200’s Carrier Class Ethernet switch supports advanced traffic manage- Aviat Provision EMS for pan network
ment, security and control features. It can be quickly integrated and harmonized with element management.
existing (deployed) Carrier Ethernet networks and devices such as the AVIAT Eclipse
GE switching platform. The WTM 3200 also provides the added security of AES • Enhanced payload and management
encryption for management and payload traffic. security with AES encryption
Datasheet
W TM 3200 all outdoor packet r adio system

General Specifications

Link options
Frequency bands Licensed 6, 7, 8, 10.5, 11, 13, 15, 18, 23, 26, 32, 38, 42 GHz
Modulation options Fixed/adaptive 4, 16, 32, 64, 128, 256, 512, 1024 QAM
ETSI radio channel size Software configurable 7, 14, 28, 40, 56 MHz
Capacity Range Airlink capacity 12 - 466 Mbit/s
Ethernet throughput L1/64 byte 11 - 455 Mbit/s (excluding Header Compression)
Configurations All outdoor 1+0 NP (non protected), 1+1 HSB (hot standby), 1+1 SD (space diversity),
2+0 XPIC, 2+0 East/West (repeater)
Connectors and interfaces
Traffic and management connector RJ-45 (100/1000 BaseT)
Protection/XPIC cable Amphenol (8 pin)
RSSI Female BNC
Antenna port Interface 6-42 GHz Standard EIA rectangular waveguide
Antenna mounting Direct mount (standard) 6-42 GHz Proprietary direct mount for antenna diameters 0.3 to 1.8 m
Remote mount (optional) 6-42 GHz Remote mount via flex/elliptical waveguide
Polarisation, field selectable Vertical or horizontal polarization
RF specifications
Transmitter/receiver source Synthesized
Frequency stability ± 10 ppm
Transmitter mute < -50 dBm
Synthesizer resolution 0.25 MHz
XPD improvement (XPIC configurations) 20 dB
Rx Max Input Level No damage -10 dBm
Residual (Background) Bit Error Rate Better than 10 -12
RSSI Accuracy (measured at BNC port) ± 3 dB
Carrier Ethernet/IP specifications
Frame handling Max frame size Up to 9700 byte frames (bi directional)
QoS support Traffic classification Port based, VLAN ID based, DSCP based or MPLS-EXP based
Transmission queues 4 to 8
Scheduling Strict, WRR, DWRR or Hybrid (Strict + DWRR)
Flow control IEEE 802.3x
Throughput acceleration Standard IFG & Preamble supression
Optional Header compression
Synchronization Synchronous Ethernet
Ring Protection ITU-T G.8032 ERP
OAM IEEE 802.1ag and ITU-T Y-1731
Traffic policing RFC 2698 (two/three color)
RED/WRED traffic shaper
Fault and configur ation management
Secure management features Standard encryption 32 bit
Optional encryption 128 bit AES
Centralized user accounts RADIUS Protocol (RFC-2865)
Interface, electrical Ethernet 100/1000 Base-T
Performance monitoring ITU-T Rec. G.826
Routing protocols supported Static and dynamic routing, RIP I, RIP II, OSPF
Local/remote configuration tool ePortal
Element management Aviat Networks ProVision®
Standards compliance
EMI/EMC EN 55022 Class B - IEC 60950 add.IV-Class III, ETSI EN 301 489-1/4 Class B
Operation EN 300 019-2-4 test T 4.1 (IEC Class 4M5 for vibrations), EN 300 019-2-4 test T4.1
(IEC Class 4M3 for shocks)
Safety EN 60950-1 (2006)
RF performance EN 302 217 parts 1, 2.1 and 2.2
Water ingress IP65
Lightning protection Surge 5 kV - 10/700 microsec ITU-T k.45 for IDU-ODU Cable
Ethernet & IP networking IEEE 802.3, IPv4 and IPv6
RoHS According to 2002/95/EC
Electrical and mechanical
Power Maximum/typical 35 W / 32.5 Watts
Size and weight 275 x 275 x 82.5 mm / < 5 kg
Environmental
Operating temperature Still air -33˚ to +55˚C
Humidity 100%
Altitude 3000 meters

www.aviatnetworks.com
Aviat, Aviat Networks, and the Aviat logo are trademarks or registered trademarks of Aviat Networks, Inc.
Eclipse and Provision is a registered trademarks of Aviat U.S., Inc.
© Aviat Networks, Inc. (2012) All Rights Reserved. Data subject to change without notice. _d_WTM3200_13Feb12v2