T 8052 EN

Series 250 · Type 3251-1 and Type 3251-7 Pneumatic Control Valves

Type 3251 Globe Valve · ANSI version

Application
Control valve for process engineering applications with high industrial requirements
Valve size NPS ½ to 20
Pressure rating Class 150 to 2500
Temperatures –325 to +1022 °F (–196 to +550 °C)

Type 3251 Globe Valve operated with

•• Type 3271 Pneumatic Actuator (Type 3251-1 Control
Valve)
•• Type 3277 Pneumatic Actuator (Type 3251-7 Control
Valve) for integral positioner attachment
Valve body made of
•• Cast steel
•• Cast stainless steel, high-temperature cast steel or cast
cold-resisting steel
•• Special materials
Low-noise valve plug
•• Metal seal
•• Soft seal up to Class 300
•• High-performance metal seal
•• Balanced to handle high differential pressures
The control valves, designed according to the modular assem‑
bly principle, can be equipped with various accessories:
Positioners, limit switches, solenoid valves, and other accesso‑
ries according to IEC 60534-6-1 1) and NAMUR recommen‑
dation (see Information Sheet uT 8350). Fig. 1: Type 3251-1 Pneumatic Control Valve with Type 3271
Pneumatic Actuator
Versions
Standard version with PTFE packing for temperatures from 14 –– Flow divider or AC-1/AC-2/AC-3 Trim for noise reduction
to 428 °F (–10 to +220 °C) or with adjustable high-tempera‑ (see Data Sheets u T 8081, u T 8082 and u T 8083)
ture packing from 14 to 662 °F (–10 to +350 °C), valve size –– Valve plug with pressure balancing · See Table 3
NPS ½ to 20, pressure rating Class 150 to 2500 (see Table 1) –– Perforated plug · See Data Sheet u T 8086
–– Type 3251-1 (Fig. 1) · Type 3251 Valve and Type 3271 –– Insulating section or bellows seal · See Technical data
Actuator with 350 to 2800 cm² actuator area (see Data
–– Heating jacket · Details on request
Sheets u T 8310‑1, u T 8310‑2 and u T 8310‑3)
–– Additional handwheel · See Data Sheet u T 8310‑1
–– Type 3251-7 · Type 3251 Valve and Type 3277 Actuator
with 350 to 750v2 cm² actuator area for integral position‑ –– DIN version · DN 15 to 500, PN 16 to 400 · See Data
er attachment (see Data Sheet u T 8310‑1) Sheet u T 8051
–– Type 3251 Valve with Type 3273 Hand-operated Actua-
Further versions
tor · For valves with max. 30 mm rated travel and
–– Welding ends or welding-neck ends acc. to ANSI B16.25 side-mounted handwheel for travel > 30 mm · See Data
Sheet u T 8312
1) Accessories required. See associated actuator documentation. –– Type 3251-2 Electric Control Valve · Details on request

SAMSON AKTIENGESELLSCHAFT · Weismüllerstraße 3 · 60314 Frankfurt am Main, Germany Edition September 2019
Phone: +49 69 4009-0 · Fax: +49 69 4009-1507 · [email protected] · www.samson.de
Principle of operation
The medium flows through the valve in the direction indicated
by the arrow. The valve plug determines the cross-sectional
area of flow. The version with bellows seal (Fig. 4) is fitted
with a test connection to monitor the stainless steel bellows.
The valves can be equipped with a flow divider (u T 8081)
for noise reduction.
Pressure balancing must be used when high pressures or dif‑
ferential pressures act on the plug (Fig. 3).

Fail-safe action
Depending on how the springs are arranged in the pneumatic Fig. 3: Type 3251 Valve with welding ends and balanced plug
actuator (see Data Sheets u T 8310-1, u T 8310‑2 and
u T 8310‑3), the valve has two different fail-safe positions ef‑
fective upon air supply failure.
–– Actuator stem extends (fail-close)
The valve closes when the supply air fails.
–– Actuator stem retracts (fail-open)
The valve opens when the supply air fails.

Differential pressures
The permissible differential pressures can be found in the In‑
formation Sheet u T 8000‑4.
Fig. 2 to Fig. 4 show configuration examples.

Fig. 4: Type 3251 Valve with flow divider ST 1 and additional

bellows seal with test connection

Fig. 2: Type 3251‑1 Control Valve with Type 3271 Pneumatic

Actuator

2 T 8052 EN
Table 1:  Technical data for Type 3251
Cast steel Cast steel Cast stainless steel
Material
A216 WCC A217 WC6 A351 CF8M
NPS ½ to 12 in Class 150 to 2500
Valve size and pressure rating NPS 14 in Class 150 to 600
NPS 16 to 20 in Class 150 to 1500
Flanges All ANSI versions
Type of connection
Welding ends According to ANSI B16.25
Seat-plug seal Metal seal · Soft seal · High-performance metal seal
Characteristic Equal percentage · Linear · Quick opening (u T 8000‑3)
Rangeability 50:1

Compliance  · 

Temperature ranges in °F (°C) · Permissible operating pressures according to pressure-temperature diagrams (see Information Sheet
u T 8000-2)
Body without insulating section 14 to 428 (–10 to +220) · Up to 662 (350) with high-temperature packing
Insulating section –20 to +800 –20 to +932 –325 to +1022
Body with
or bellows seal (–29 to +425) (–29 to +500) (–196 to +550) 2)
Metal seal –325 to +1022 (–196 to +550) 2)
Standard
Valve Soft seal –325 to +428 (–196 to +220) 2)
plug 1) Balanced with PTFE ring –58 to +428 (–50 to +220) 3)
Balanced with graphite ring 428 to 932 (220 to 500) 4)

Leakage class according to ANSI/FCI 70‑2

Metal seal Standard: IV · High-performance metal seal: V
Standard
Valve Soft seal VI
plug
With PTFE ring (standard): IV · High-performance metal seal: V
Balanced, metal seal
With graphite ring: IV
1) Only in combination with suitable body material
2) Note: The temperature limits are not directly converted temperatures.
3) Lower temperatures on request
4) Higher temperatures on request

Table 2:  Materials

Standard version Cast steel Cast steel Cast stainless steel

Body 1) A216 WCC A217 WC6 A351 CF8M
Valve bonnet A216 WCC/A 105 A217 WC6/A 182 F12 Cl.2 A351 CF8M/A 182 F316
Seat and plug 2)
Metal seal 410-2/1.4008 316 L/CF3M
Soft seal PTFE with 15 % glass fiber
Seal ring for
Pressure balancing PTFE with carbon · Graphite
Guide bushings 1.4112 2.4610
Packing 3) V-ring packing: PTFE with carbon, spring: 302 or high-temperature packing
Body gasket Graphite seal on metal core

Insulating section A216 WCC/A 105 A217 WC6/A 182 F12 Cl.2 A351 CF8M/A 182 F316

Metal bellows seal

Intermediate piece A216 WCC/A 105 A217 WC6/A 182 F12 Cl.2 A351 CF8M/A 182 F316

Metal bellows 1.4571 4)

Heating jacket A240 316L

1) Other materials (e.g. for high-temperatures or low temperatures) as well as special materials for applications with sea water, such as 1.4538,
duplex 1.4470, nickel-based alloy 9.4610, see pressure-temperature diagrams in Information Sheet u T 8000-2
2) Seats and metal-seated plug also with Stellite® facing or plug made of solid Stellite® available (up to max. KVS 630)
3) Other packings on request (u T 8000-1)
4) Other bellows materials on request

T 8052 EN 3
Table 3:  CV and KVS coefficients · Versions highlighted in gray also available with balanced plug
Terms for control valve sizing according to IEC 60534, Parts 2-1 and 2-2:  FL = 0.95, XT = 0.75
Table 3.1:  Overview with flow divider ST 1 (CV1/KVS1), ST 2 (CV2/KVS2) and ST 3 (CV3/KVS3)
0.12 · 0.2
CV 0.75 1.2 2 3 5 7.5 12 20 30 47 75 120 190 290 420 735 1150 1730 2300 2900 4200
0.3 · 0.5
0.1 · 0.16
KVS 0.63 1.0 1.6 2.5 4 6.3 10 16 25 40 63 100 160 250 360 630 1000 1500 2000 2500 3600
0.25 · 0.4
CV1 1.7 2.6 4.2 7 10.5 17 26 42 67 105 170 265 375 650 1040 1560 2080 2600 3700
–
KVS1 1.45 2.2 3.6 5.7 9 14.5 22 36 57 90 144 225 320 560 900 1350 1800 2250 3200
CV2 3.7 6.0 9.5 15 23 37 60 95 145 235 335 580 950 1400 1860 2300 –
–
KVS2 3.2 5.0 8 13 20 32 50 80 125 200 290 500 800 1200 1600 2000 –

CV3 3.5 5.6 9 14 23 35 55 90 140 220 315 560 880 1280 1730 2200 –
–
KVS3 3 4.8 7.5 12 20 30 47 75 120 190 270 480 750 1100 1500 1900 –

Seat Ø [in] 0.24 0.47 0.945 1.22 1.5 1.97 2.48 3.15 3.94 4.92 5.91 7.87 9.84 11.81 13.78 15.75 19.69

Seat Ø
6 12 24 31 38 50 63 80 100 125 150 200 250 300 350 400 500
[mm]
Rated travel
0.59 1.18 2.36 4.72
[in]
Rated travel
15 30 60 120
[mm]

Table 3.2:  Versions without flow divider · Class 150 to 2500

0.12 · 0.2
CV 0.75 1.2 2 3 5 7.5 12 20 30 47 75 120 190 290 420 735 1150 1730 2300 2900 4200
0.3 · 0.5
0.1 · 0.16
KVS 0.63 1.0 1.6 2.5 4 6.3 10 16 25 40 63 100 160 250 360 630 1000 1500 2000 2500 3600
0.25 · 0.4
NPS DN
½ 15 • • • • • • 1)
1 25 • • • • • • • • 1)
1½ 40 • • • • • • • • • • 1)
2 50 • • • • • • 1)
3 80 • • • • • • • • 1)
4 100 • • • • • 1)
6 150 • • • • • 1)
8 200 • • • 2)
• • 1)
10 250 • • • 2) • • • 1)
12 300 • • 3) • • • • 1)
14 – • • • • • 4)
16 400 • • • • • • 1)
20 500 • • • • • 1)
1) Reduced CV/KVS coefficients with CV 4.2 – 10.5 – 26 42 – 105 170 – 375 650 1040 1560 – 2600 3700
Class 900 to 2500: KVS 3.6 – 9 – 22 36 – 90 144 – 320 560 900 1350 – 2250 3200
2) Pressure balancing only for ≥ Class 600
3) Pressure balancing only for Class 600/900
4) For Class 150 to 600 only

Table 3.3:  Versions with flow divider ST 1 · Class 150 to 900 1)

CV1 1.7 2.6 4.2 7 10.5 17 26 42 67 105 170 265 375 650 1040 1560 2080 2600 3700
–
KVS1 1.45 2.2 3.6 5.7 9 14.5 22 36 57 90 144 225 320 560 900 1350 1800 2250 3200
NPS DN
½ 15 • • •
1 25 • • • • •
1½ 40 • • • • • •
2 50 • • • • • •
3 80 • • • • • • • •
4 100 • • • • •
6 150 • • • • •
8 200 • • • 2) • •
10 250 • • • 2) • • •
12 300 • • 3) • • • •
14 – • • • •
16 400 • • • • • •
20 500 • • • • •
1) Class 1500 to 2500 with flow divider ST 1 and pressure balancing on request
2) Pressure balancing only for ≥ Class 600
3) Pressure balancing only for Class 600/900

4 T 8052 EN
Table 3.1:  Overview with flow divider ST 1 (CV1/KVS1), ST 2 (CV2/KVS2), and ST 3 (CV3/KVS3)
0.12 · 0.2
CV 0.75 1.2 2 3 5 7.5 12 20 30 47 75 120 190 290 420 735 1150 1730 2300 2900 4200
0.3 · 0.5
0.1 · 0.16
KVS 0.63 1.0 1.6 2.5 4 6.3 10 16 25 40 63 100 160 250 360 630 1000 1500 2000 2500 3600
0.25 · 0.4
CV1 1.7 2.6 4.2 7 10.5 17 26 42 67 105 170 265 375 650 1040 1560 2080 2600 3700
–
KVS1 1.45 2.2 3.6 5.7 9 14.5 22 36 57 90 144 225 320 560 900 1350 1800 2250 3200
CV2 3.7 6.0 9.5 15 23 37 60 95 145 235 335 580 950 1400 1860 2300 –
–
KVS2 3.2 5.0 8 13 20 32 50 80 125 200 290 500 800 1200 1600 2000 –

CV3 3.5 5.6 9 14 23 35 55 90 140 220 315 560 880 1280 1730 2200 –
–
KVS3 3 4.8 7.5 12 20 30 47 75 120 190 270 480 750 1100 1500 1900 –

Seat Ø [in] 0.24 0.47 0.945 1.22 1.5 1.97 2.48 3.15 3.94 4.92 5.91 7.87 9.84 11.81 13.78 15.75 19.69

Seat Ø
6 12 24 31 38 50 63 80 100 125 150 200 250 300 350 400 500
[mm]
Rated
0.59 1.18 2.36 4.72
travel [in]
Rated
15 30 60 120
travel [mm]

Table 3.4:  Versions with flow divider ST 2 · Class 150 to 900 1)

CV2 3.7 6.0 9.5 15 23 37 60 95 145 235 335 580 950 1400 1860 2300 –
–
KVS2 3.2 5.0 8 13 20 32 50 80 125 200 290 500 800 1200 1600 2000 –
NPS DN
2 50 • • • • • •
3 80 • • • • • • • •
4 100 • • • • •
6 150 • • • • •
8 200 • • • 2) • •
10 250 • • • 2) • • •
12 300 • • 3) • • • •
14 – • • • •
16 400 • • • • • •
20 500 • • • •
1) Class 1500 to 2500 with flow divider ST 2 and pressure balancing on request
2) Pressure balancing only for ≥ Class 600
3) Pressure balancing only for Class 600/900

Table 3.5:  Versions with flow divider ST 3 · Class 150 to 900 1)

CV3 3.5 5.6 9 14 23 35 55 90 140 220 315 560 880 1280 1730 2200 –
–
KVS3 3.0 4.8 7.5 12 20 30 47 75 120 190 270 480 750 1100 1500 1900 –
NPS DN
2 50 • 2) • 2) • 2)
3 80 • 2) • 2) • 2) • 2) • 2) •
4 100 • 2) • •
6 150 • • • •
8 200 • • • 4) •
10 250 • • 4) • •
12 300 • • 5) • • •
14 – • • • • 3)
16 400 • • • • •
20 500 • • • •
1) Class 1500 to 2500 with flow divider ST 3 and pressure balancing on request
2) Version not possible in combination with a bellows seal
3) Only up to Class 300
4) Pressure balancing only for ≥ Class 600
5) Pressure balancing only for Class 600/900

T 8052 EN 5
Table 4:  Dimensions for Type 3251-1 and Type 3251-7 Pneumatic Control Valves in standard version
Table 4.1:  Type 3251 Valve · Face-to face dimensions according to ANSI/ISA-75.08.01 for Class 600 and lower and according
to ASME B16.10 for Class 900 and higher
NPS ½ 1 1½ 2 3 4 6 8 10 12 14 16 20
Valve
DN 15 25 40 50 80 100 150 200 250 300 – 400 500
in 7.25 7.25 8.75 10.00 11.75 13.88 17.75 21.38 26.50 29.00 35.00 40.00 On
Class 150
mm 184 184 222 254 298 352 451 543 673 737 889 1016 req.
in 7.50 7.75 9.25 10.50 12.50 14.50 18.62 22.38 27.88 30.50 36.50 41.62 On
Class 300
mm 190 197 235 267 318 368 473 568 708 775 927 1057 req.
Length L in 8.00 8.25 9.88 11.25 13.25 15.50 20.00 24.00 29.62 32.25 38.25 43.62 On
(flanges Class 600
mm 203 210 251 286 337 394 508 610 752 819 972 1108 req.
RF and
welding in 8.50 10.00 12.00 14.50 15.00 18.00 24.00 29.00 33.00 38.00
Class 900 – On request
ends) mm 216 254 305 368 381 457 610 737 838 965
Class in 8.50 10.00 12.00 14.50 18.50 21.50 27.75 32.75 39.00 44.50
– On request
1500 mm 216 254 305 368 470 546 705 832 991 1130
Class in 10.38 12.12 15.12 17.75 22.75 26.50 36.00 40.25
On request –
2500 mm 264 308 384 451 578 673 914 1022
Class 150 in 5.98 5.98 6.46 8.54 8.74 9.53 12.36 15.24 17.40 1) 25.79 25.20 25.20 On
to 600 mm 152 152 164 217 222 242 314 387 442  1)
655 640 640 req.
in 7.32 7.32 7.68 9.88 8.74 9.53 12.36 15.24 20.43 2) 25.79
Height Class 900 – On request
H4 mm 186 186 195 251 222 242 314 387 519 2) 655
Class in 7.32 7.32 7.68 9.88 11.34 13.7 18.35 22.44
Class 1500
1500 to On request –
mm 186 186 195 251 288 348 466 570 On request
2500
in 9.45 9.45 9.45 9.45 9.45 9.45
350 cm² –
mm 240 240 240 240 240 240
in 9.45 9.45 9.45 9.45 9.45 9.45 16.46
355v2 cm² –
mm 240 240 240 240 240 240 418
in 9.45 9.45 9.45 9.45 9.45 9.45 16.46 16.46 16.46
700 cm² –
mm 240 240 240 240 240 240 418 418 418
in 9.45 9.45 9.45 9.45 9.45 9.45 16.46 16.46 16.46
750v2 cm² –
mm 240 240 240 240 240 240 418 418 418
H8 for in 11.61 11.61 11.61 16.46 16.46
1000 cm² On request
actuator mm 295 295 295 418 418
1400- in 11.61 11.61 11.61 16.46 16.46
On request
60 cm² mm 295 295 295 418 418
1400- in 18.90 18.90 18.90 19.80 19.80 19.80 25.59 25.59 25.59 25.59
–
120 cm² mm 480 480 480 503 503 503  3)
650 650 650 650
in 18.90 18.90 18.90 19.80 19.80 19.80 25.59 25.59 25.59 25.59
2800 cm²
mm 480 480 480 503 503 503 3) 650 650 650 650
2x in 18.90 18.90 18.90 19.80 19.80 19.80 25.59 25.59 25.59 25.59
2800 cm² mm 480 480 480 503 503 503 3) 650 650 650 650
in 1.97 2.36 3.05 3.54 3.94 6.3 8.66 9.84 12.21 14.57 15.16 16.34 On
Class 150
mm 50 60 80 90 100 160 220 250 310 370 385 415 req.
H2 Class 300 in 2.36 2.76 3.54 3.94 4.72 7.09 9.25 10.63 11.82 15.35
(DN On request
to 600 mm 60 70 90 100 120 180 235 270 300 390
100/
NPS 4 in 2.76 3.05 3.94 4.33 4.72 7.09 9.25
Class 900 On request – On request
and mm 70 80 100 110 120 180 235
larger
Class in 2.76 3.05 3.94 4.33 5.51 8.66 11.22
with On request – On request
foot) 1500 mm 70 80 100 110 140 220 285
Class in 2.95 3.54 4.33 4.72 6.3 9.33 12.6
On request – On request
2500 mm 75 90 110 120 160 237 320
1) NPS 10, Class 150 to 300: 442 mm or 17.40”
2) NPS 10, Class 600 to 900: 519 mm or 20.43”
3) H8 = 650 mm with 250 mm seat bore

6 T 8052 EN
Dimensional drawings

Type 3271 Pneumatic Actuator Type 3271 Pneumatic Actuator Type 3277 Pneumatic Actuator

H3 ØD
a
H3 ØD
H3 ØD a
a
H
H
H
H5
a2
H8 H8
H8

H4 H4
H4

H2 H2
H2

L
L L

Type 3251‑1 Type 3251‑1 Type 3251‑7

Up to NPS 3 without foot NPS 4 and larger

a a

d
H8

a Type 3251 with heating jacket

H4 Dimensions on request

c
L

Type 3251 with bellows seal

or insulating section

T 8052 EN 7
Table 4.2:  Types 3271 and 3277 Pneumatic Actuators
Actuator area cm² 350 355v2 700 750v2 1000 1400-60 1400-120 2800 2 x 2800
in 11.02 11.02 15.35 15.51 18.19 20.87 21.02 30.32 30.32
Diaphragm ØD
mm 280 280 390 394 462 530 534 770 770
in 3.23 4.76 7.83 9.29 15.87 13.27 23.54 28.07 47.76
H 1)
mm 82 121 199 236 403 337 598 713 1213
in 4.33 4.33 7.48 7.48 24.02 24.02 25.59 25.59 25.59
H3 2)
mm 110 110 190 190 610 610 650 650 650
Type 3277 in 3.98 3.98 3.98 3.98 – – – – –
H5
Type 3277 mm 101 101 101 101 – – – – –
Type 3271 M30 x 1.5 M60 x 1.5 M100 x 2
Thread
Type 3277 M30 x 1.5 – – – – –
G 
3/8 G  3/8 G 
3/8 G  3/8 G ¾ G ¾ G 1 G 1 G 1
a Type 3271
(3/8 NPT) (3/8 NPT) (3/8 NPT) (3/8 NPT) (¾ NPT) (¾ NPT) (1 NPT) (1 NPT) (1 NPT)
a2 Type 3277 G 3/8 G 3/8 G 3/8 G 3/8 – – – – –

1) Height including lifting eyelet or female thread and eyebolt according to DIN 580. Height of the swivel lifting hook may differ. Actuators up to
350v2 cm² without lifting eyelet or female thread
2) Minimum clearance required to remove the actuator

Table 5:  Weights for Type 3251-1 and Type 3251-7 in standard version

Table 5.1:  Type 3251 Valve

NPS ½ 1 1½ 2 3 4 6 8 10 12 14 16 20
Valve
DN 15 25 40 50 80 100 150 200 250 300 – 400 500
lbs 26 31 42 66 110 152 342 948 1892 2028 2965 3197 3638
Class 150
kg 12 14 19 30 50 69 155 430 858 920 1345 1450 1650
lbs 33 35 57 95 170 247 694 948 1892 2028 3010 3197 3638
Class 300
kg 15 16 26 43 77 112 315 430 858 920 1365 1450 1650
lbs 33 35 57 95 170 247 694 1096 1609 2535
Valve Class 600 On request
without kg 15 16 26 43 77 112 315 497 730 1150
actua‑ lbs 33 35 57 95 170 247 694 1157 2844 3263 5732 On
tor Class 900 –
kg 15 16 26 43 77 112 315 525 1290 1480 2600 req.

lbs On 75 126 159 348 496 1235 1949 4630 On

Class 1500 – On request
kg req. 34 57 72 158 225 560 884 2100 req.

lbs On 93 163 238 379 604 2198 3990

Class 2500 On request – –
kg req. 42 74 108 172 274 997 1810

Table 5.2:  Types 3271 and 3277 Pneumatic Actuators

Actuator cm² 350 355v2 700 750v2 1000 1400-60 1400-120 2800 2 x 2800

Without lbs 18 33 49 80 187 154 386 992 2094

Type handwheel kg 8 15 22 36 85 70 175 450 950
3271
(approx.) With lbs 29 44 60 91 419 386 661 /937
 1)  2)
1268 /1543
 1)  2)
On request
handwheel kg 13 20 27 41 190 175 300 1)/425 2) 575 1)/700 2)

Without lbs 26 42 57 88
Type handwheel kg 12 19 26 40
3277 –
(approx.) With lbs 37 53 68 98
handwheel kg 17 24 31 45
1) Side-mounted handwheel up to 80 mm travel
2) Side-mounted handwheel above 80 mm travel

8 T 8052 EN
Table 6:  Dimensions and weights for Type 3251 with insulating section · Without actuator
NPS ½ 1 1½ 2 3 4 6 8 10 12 14 16 20
Valve size
DN 15 25 40 50 80 100 150 200 250 300 – 400 500

Class 150 in 13.9 13.9 14.37 19.17 19.37 20.16 26.18 37.28 42.01 45.32 On 44.76 On
to 600 mm 353 353 365 487 492 512 665 947 1067 1151 req. 1137 req.

Height in 15.04 15.04 15.39 20.32 19.37 20.16 26.18 37.28 42.01 On
Class 900 – On request
H4 mm 382 382 391 516 492 512 665 947 1067 req.

Class 1500 in 15.04 15.04 15.39 20.32 21.5 23.54 31.10 42.13 Class 1500
On request –
to 2500 mm 382 382 391 516 546 598 790 1070 On request

lbs 35 40 51 79 130 172 412 1054 2046 2123

Class 150
kg 16 18 23 36 59 78 187 478 928 963
lbs 42 44 66 108 190 267 774 1054 2046 2123
Class 300 On request
kg 19 20 30 49 86 121 351 478 928 963
lbs 42 44 66 108 190 267 774 1191 2641 2635
Weight Class 600
without kg 19 20 30 49 86 121 351 540 1198 1195
actuator lbs 42 44 66 108 190 267 774 1254 2657 On
for Class 900 – On request
kg 19 20 30 49 86 121 351 569 1205 req.

lbs On 79 130 172 375 545 1314 2094

Class 1500 On request – On request
kg req. 36 59 78 170 247 596 950
lbs On 97 168 247 401 653 2277 4090
Class 2500 On request – –
kg req. 44 76 112 182 296 1033 1855

T 8052 EN 9
Table 7:  Dimensions and weights for Type 3251 with bellows seal · Without actuator
NPS ½ 1 1½ 2 3 4 6 8 10 12 14 16 20
Valve size
DN 15 25 40 50 80 100 150 200 250 300 – 400 500
Travel
Class in 14.25 14.25 14.72 23.94 24.13 24.13 27.72
150 mm 0.59 to
362 362 374 608 613 613 704
2.36”
Class in 15 to 14.25 14.25 14.72 23.94 24.13 24.13 32.96
300 to 60 mm
900 mm 362 362 374 608 613 613 837
in 0.59 24.92 24.92 25.0 33.62 34.02
On request
mm 15 633 633 635 854 864
Class in 1.18 33.62 34.02
– On request
1500 mm 30 854 864 –
in 2.36 On
–
mm 60 req.
in 0.59 24.92 24.92 25.0 On 40.16
Height On request
mm 15 633 633 635 req. 1020
H4
Class in 1.18 40.16
– On request
2500 mm 30 1020
in 2.36 On
–
mm 60 req.
Class in 1.18 to 4.72 41.22 59.13 60.20 59.69 62.60
On
150 to
req.
300 mm 30 to 120 1047 1502 1529 1516 1590
Class in 1.18 to 2.36 62.24 62.68 64.96
–
600 to – On request
900 mm 30 to 60 1581 1592 1650
Class in 4.72 94.65 91.42 On 90.16 On
–
600 mm 120 2404 2322 req. 2290 req.

NPS ½ 1 1½ 2 3 4 6 8 10 12 14 16 20
Valve size
DN 15 25 40 50 80 100 150 200 250 300 – 400 500

Class lbs 46 51 62 97 176 220 430 1146 2150 2227

150 kg 21 23 28 44 80 100 195 520 975 1010

Class lbs 53 55 77 126 236 317 794 1146 2150 2227

On request
300 kg 24 25 35 57 107 144 360 520 975 1010

Class lbs 53 55 77 126 236 317 794 1312 2740 2734

600 kg 24 25 35 57 107 144 360 595 1243 1240
Weight
for lbs 53 55 77 126 236 317 794 1354 2866
Class On
–
900 kg 24 25 35 57 107 144 360 614 1300 req.
On request
Class lbs On 93 174 On 414 606 1411 2216
On request –
1500 kg req. 42 79 rqe. 188 275 640 1005

Class lbs On 106 201 273 507 714 2337 4222

On request –
2500 kg req. 48 91 124 230 324 1060 1915

10 T 8052 EN
Selection and sizing of the control valve Order specifications:
1. Calculate the CV (KV) coefficient according to IEC 60534-6. Valve size NPS
2. Select valve size NPS and CV (KVS) coefficient from Table 3. Pressure rating Class
3. Determine the permissible differential pressure from the Body material According to Table 2
Information Sheet u T 8000‑4.
Bonnet Standard bonnet, insulating section
4. Select the valve body material from Table 1 and Table 2 as or bellows seal
well as from the pressure-temperature diagrams (see Infor‑
Type of connection Flanges/welding ends
mation Sheet u T 8000‑2).
Plug Standard or balanced
5. Select accessories from Table 1 and Table 2.
Soft seal, metal seal or high-
performance metal seal
Characteristic Equal percentage, linear or quick
opening
Actuator Type 3271 or Type 3277 (see Data
Sheets u T 8310-1, u T 8310-2,
and u T 8310‑3)
Fail-safe position Fail-close or fail-open
Process medium Density in lb/cu.ft or kg/m³ and
temperature in °F (°C)
Flow rate lbs/h or kg/h or cu.ft/min or m³/h in
standard or operating state
Pressure p1 and p2 in psi (bar)
(absolute pressure pabs)
(with minimum, normal and
maximum flow rate
Valve accessories Positioner and/or limit switch

Associated Information Sheet u T 8000-X

Associated Data Sheets

for pneumatic actuators u T 8310-1 to -3

Associated Mounting and

Operating Instructions u EB 8052

T 8052 EN 11
Note: The temperature limits for DIN and ANSI versions are
not directly converted temperatures.
2019-10-07 · English

Specifications subject to change without notice T 8052 EN