S800 SCL SR - 2CCC413009B0201 PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 16

Short-circuit current limiter

S800-SCL-SR
2 ABB Short-circuit current limiter
S800-SCL-SR
Self-resetting current limiting module

S800-SCL-SR is ABB’s innovative self-resetting current


limiting module which considerably increases the short-
circuit breaking capacity of downstream manual motor
starters and high performance MCBs

S800-SCL-SR is a self resetting current limiting module based


on the S800 technology. It limits the short-circuit current until
the downstream means of protection trips. Its current continu-
ity makes it as the ideal solution for group protection:

All parallel branches remain operative. This leads to an


expanded application range of the low voltage switchgear
whose short-circuit capabilities are usually limited.

S800-SCL-SR can be combined with S800S high perfor-


mance MCB or with manual motor starters. S800-SCL-SR
can also back up a single circuit breaker or a group of circuit
breakers or motor starters (group protection). Terminals and
outside dimensions are identical to the S800 range.

ABB already offers a 3-pole short-circuit limiter, the


S803S-SCL. Compared to the new S800S-SCL-SR it has a
toggle and therefore the possibility to trip. After tripping the
device has to be reset manually. Please check page 12 for
details.

ABB Short-circuit current limiter 3


The worldwide solution

S800-SCL-SR is available as IEC version and IEC/UL version.


The IEC/UL version complies with IEC, UL 508 and CSA 22.2
No. 14.

S800S-SCL-SR 1 … 3-pole version S803W-SCL-SR 3-pole version


up to 690 V AC up to 600 V AC acc. to UL508 and
690 V AC acc. to IEC

4 ABB Short-circuit current limiter


Application

S800S-SCL-SR and S803W-SCL-SR are for high short-


circuits levels. The drawing below shows three exemplary
systems for short-circuits limitations.

The short-circuit limiter provides full selectivity for any down-


stream m ­ otor protection combination. In case of a short-
­c ircuit in one of the end circuits, the S800S-SCL-SR /
S803W-SCL-SR helps the manual ­m otor ­s tarters to break
the defect circuit without forcing the ­u pstream protection
device to trip.

In the event of a downstream short circuit occurrences the


IEC version
S800S-SCL-SR /S803W-SCL-SR will react selective to a
group of, e. g. manual motor starters, until the respective
faulty motor circuit has tripped. All other motor starters in
the group remain operative! IEC/UL version

Maximum system availability is given.

Short-circuit Short-circuit Short-circuit


limiter limiter limiter

High High High


Manual Manual Manual Manual
performance performance performance
Motor Starter Motor Starter Motor Starter Motor Starter
MCB MCB MCB

Contactor Contactor Contactor Contactor

Overload Overload Overload Overload


MCB MCB MCB
Relay Relay Relay Relay

Motor Motor Motor Motor

ABB Short-circuit current limiter 5


The combination can be widely used for protection circuits in
a large variety of ABB’s business segments where high short-
circuits meet low voltage circuit breakers.

For example in:

−− MNS installation
−− Shipbuilding
−− Mining
−− Oil & Gas
−− Power generation
−− Wind Power
−− …

6 ABB Short-circuit current limiter


Customer Benefits

Maximum system availability


− − Back-up up to highest short-circuit currents
− − Full selectivity for any downstream motor-, or line protection
­c ombination
− − No tripping

Compact design
− − Less cabinet space required

Cost saving solution


−− Easy or even unnecessary short circuit calculation
− − Less required cabinet space
− − Lower system cost due to the available choice of standard
­c omponents
− − One device protects a large number of downstream manual
motor starters or miniature circuit breaker
− − One device for both world standards

Reliability
− − Proven S800 high performance miniature circuit breaker technology
− − Third party testing

Safety
− − All advantages of a fuseless distribution
− − Low let through energy values
− − Limited current peak
− − Maximum personnel safety
−− Increased breaking capacity of the connected circuit breaker- or
motor starter combination

Flexibility
− − One size fits all approach regarding standards
− − Simple and compact for the DIN rail

ABB Short-circuit current limiter 7


Technical data
S800S-SCL-SR/S803W-SCL-SR

S800S-SCL-SR S803W-SCL-SR

Rated operational current I e [A] 32, 63, 100
Pole 1, 2, 3 3
Rated operational voltage U e
(AC) according to IEC 60947-2 50/60 Hz [V] 400/690 690
(AC) according to UL 508 50/60 Hz [V] 600
Rated insulation voltage U i [V] 690
Rated impulse withstand voltage U imp [kV] 8
Rated ultimate short-circuit breaking capacity
I cu = Ics according to IEC 60947-2 *
(AC) 50/60 Hz 240/415 V [kA] 100
(AC) 50/60 Hz 254/440 V [kA] 100
(AC) 50/60 Hz 277/480 V [kA] 65
(AC) 50/60 Hz 289/500 V [kA] 65
(AC) 50/60 Hz 346/600 V [kA] 65
(AC) 50/60 Hz 400/690 V [kA] 50
Short-circuit rating according to UL 508, CSA 22.2 *
(AC) 50/60 Hz 480 V [kA] 65
(AC) 50/60 Hz 600 V [kA] 65
*) V
 alid only for approved combinations
Please have a look to separate coordination tables on pages 14 and 15

Rated frequency [Hz] 50/60


Mounting position any
Connections C u
[mm 2] 1 … 50 rigid (solid/stranded)
[mm 2] 1 … 70 flexible
14–1 AWG
Tightening torque
[Nm] min. 3 / max. 4
[in. lbs.] min. 26.5 / max. 25
Feeding optional
Mouting on DIN top hat rail EN 60715
Ambient air temperature [°C] –40 … +70
Storage temperature [°C] –40 … +85
Degree of protection IP20
Classification acc. to NF F 16-101, NF F 16-102 I3, F2
Damp Heat IEC 60068-2-30, 55 °C / 95 % r.h.
Vibration IEC 60068-2-6, 5–10 Hz / 3 mm and 10–500 Hz / 2 g at 0.5 x I e
Random Vibration IEC 60068-2-64, 5–500 Hz / 2 g at 0.5 x I e
Resistance to climatic conditions IEC 60068-2-1 /-2-2 /-2-30
Standard IEC 60947-2 IEC 60947-2
IEC 60947-4-1 IEC 60947-4-1
UL 508, CSA 22.2 No. 14

8 ABB Short-circuit current limiter


Internal resistance at 25°C ambient temperature and nominal power losses
Rated current In Internal resistance R i Power losses Pvn
[A] [mΩ/pole] [W/pole]
  32 2.8 3.6
  63 1.3 5.7
100 0.7 7.8

Influence of ambient temperature – single mounted devices


Rated current In [A] 10°C 15°C 20°C 25°C 30°C 35°C 40°C 45°C 50°C 55°C 60°C 65°C 70°C
  32   38.2   37.2   35.8   35.2   34.2   33.3   32 30.7 29.8 28.8 27.8 26.5 25.1
  63   75.3   73.2   70.6   69.3   67.4   65.5   63 60.5 58.6 56.7 54.8 52.3 49.8
100 119.5 116.2 112 110 107 104 100 96 93 90 87 84 80

Maximum load Installation requirements


The total sum of the rated currents of all downstream motor
10 000
starters or circuit breakers shall not exceed the rated current
of the S800-SCL-SR. Furthermore the sum of all load cur-
rents including inrush currents shall not exceed the maximum
permissible load of the S800-SCL-SR.
1000

100
Time in s time [s]

10

0.1

0.01
1 10 100
n x Ie

Multiple of the rated operational current Ie

ABB Short-circuit current limiter 9


Order data
S800S-SCL-SR/S803W-SCL-SR

Self-resetting Type designation Product number EAN number Weight Pack.


short-circuit limiter
IEC version
[A] 7612271 [kg] unit
1-pole
  32 S801S-SCL32-SR 2CCS801901R0539 412012 0.25 1
  63 S801S-SCL63-SR 2CCS801901R0599 412036 0.25 1
100 S801S-SCL100-SR 2CCS801901R0639 411992 0.25 1

2-pole
  32 S802S-SCL32-SR 2CCS802901R0539 412074 0.5 1
  63 S802S-SCL63-SR 2CCS802901R0599 412098 0.5 1
100 S802S-SCL100-SR 2CCS802901R0639 412050 0.5 1

3-pole
  32 S803S-SCL32-SR 2CCS803901R0539 411930 0.75 1
  63 S803S-SCL63-SR 2CCS803901R0599 411947 0.75 1
100 S803S-SCL100-SR 2CCS803901R0639 411954 0.75 1

Self-resetting Type designation Product number EAN number Weight Pack.


short-circuit limiter
IEC/UL version
[A] 7612271 [kg] unit
  3-pole
  32 S803W-SCL32-SR 2CCS803917R0539 412319 0.75 1
  63 S803W-SCL63-SR 2CCS803917R0599 412326 0.75 1
100 S803W-SCL100-SR 2CCS803917R0639 412302 0.75 1

10 ABB Short-circuit current limiter


ABB Short-circuit current limiter 11
Technical and order data
S803S-SCL

A typical application of the conventional S803S-SCL is the The conventional short-circuit limiter S803S-SCL can also
airflow alignment in wind energy plants. If a failure does not be used for group protection, though all downstream circuits
isolate all motor protection devices, the system could possibly would be de-energized in case of a short circuit exceeding the
be harmed. breaking capacity of one downstream device.

S803S-SCL
Rated operational current Ie [A] 32, 63, 125
Pole 3
Rated operational voltage Ue
(AC) 50/60 Hz [V] 400/690
Disconnector properties compliant to IEC 60947-2 yes
Standard IEC 60947-2
Ambient air temperature [°C] –25 ... +60
Storage temperature [°C] –40 ... +70
Vibration IEC 60068-2-27; IEC 60068-2
*) V
 alid only for approved combinations
Please have a look to separate coordination tables on pages 14 and 15

Short-circuit current limiter Type designation Product number EAN number Weight Pack.
with cage terminal
[A] 7612271 [kg] unit
  32 S803S-SCL32 2CCS800900R0291 1208912 0.74 1
  63 S803S-SCL63 2CCS800900R0301 1208929 0.74 1
125 S803S-SCL125 2CCS800900R0281 1208905 0.74 1

Short-circuit current limiter Type designation Product number EAN number Weight Pack.
with ring lug
terminal
[A] 761227 [kg] unit
  32 S803S-SCL32-R 2CCS800900R0332 1408916 0.74 1
  63 S803S-SCL63-R 2CCS800900R0331 1208950 0.74 1
125 S803S-SCL125-R 2CCS800900R0311 1208936 0.74 1

12 ABB Short-circuit current limiter


Technical data
S800-SCL-SR and S803S-SCL

Dimension Dimension
S800S-SCL-SR/S803S-SCL S803W-SCL-SR
79.50 79.50 76.50
53 76.50 53 46
26.50 6 46 26.50 6
35

45
95

142
35

45
95
Minimum cable length between S800-SCL-SR/S803S-SCL
and downstream devices

MS/MO325
MS/MO132
S800
S800-SCL-SR/S803S-SCL min. length X min. cross section
  32 A   80 mm   6 mm2
  63 A   80 mm 16 mm2
100/125 A 250 mm 35 mm2
x

ABB Short-circuit current limiter 13


Approved combinations
S800-SCL-SR/S803S-SCL

Approved combinations with high performance MCB S800


Downstream devices Upstream devices
S800S-SCL-SR /S803W-SCL-SR S803S-SCL
Self resetting short-circuit limiter Short-circuit limiter
Rated current Ie [A] 32 63 100 32 63 125
S800S Characteristic B
   6 on request on request on request
   8 on request on request on request
  10 ■ on request on request ■
  13 ■ on request on request ■
  16 ■ on request on request ■
  20 ■ on request on request ■
  25 ■ on request on request ■
  32 ■ ■ on request ■ ■
  40 ■ on request ■
  50 ■ on request ■
  63 ■ ■ ■ ■
  80 ■ ■
100 ■ ■
125 ■
S800S Characteristic C
   6 on request on request on request
   8 on request on request on request
  10 ■ on request on request ■
  13 ■ on request on request ■
  16 ■ ■ on request ■
  20 ■ ■ on request ■
  25 ■ ■ on request ■
  32 ■ ■ ■ ■
  40 ■ ■ ■
  50 ■ ■ ■
  63 ■ ■ ■
  80 ■ ■
100 ■
125 ■
S800S Characteristic D/K
   6 on request on request on request
   8 on request on request on request
  10 ■ ■ on request ■
  13 ■ ■ on request ■
  16 ■ ■ on request ■
  20 ■ ■ ■
  25 ■ ■ ■
  32 ■ ■ ■ ■
  40 ■ ■ ■
  50 ■ ■
  63 ■ ■
  80 ■
100 ■
125 ■

14 ABB Short-circuit current limiter


Approved combinations with motor starter/S800S-KM
Downstream devices Upstream devices
S800S-SCL-SR /S803W-SCL-SR S803S-SCL
Self resetting short-circuit limiter short-circuit limiter
Rated current Ie [A] 32 63 100 32 63 125
MS/MO325
0.1– 2.5 ■ ■ ■
  4 ■ ■ ■
  6.3 ■ ■ ■
  9 ■ ■ ■ ■ ■
12.5 ■ ■ ■ ■ ■
16 ■ ■ ■ ■ ■
20 ■ ■ ■ ■
25 ■ ■ ■ ■
MS/MO132
0.1– 2.5 ■ ■
  4 ■ ■
6.3 ■ ■ ■
10 ■ ■ ■ ■ ■
16 ■ ■ ■ ■ ■
20 ■ ■ ■ ■
25 ■ ■ ■ ■
32 ■ ■ ■ ■
S800S-KM
20 ■ ■ ■
25 ■ ■ ■
32 ■ ■ ■ ■
40 ■ ■ ■
50 ■ ■
63 ■ ■
80 ■
* Motor starter combinations acc. to IEC 60947-4-1
– Combinations with S500-K and S500-KM on request

■ Applies for all voltages according to the table below

S800S-SCL-SR S803W-SCL-SR S803S-SCL


Rated ultimate short-circuit breaking capacity
I cu = Ics according to IEC 60947-2
(AC) 50/60 Hz 240/415 V [kA] 100 100
(AC) 50/60 Hz 254/440 V [kA] 100 100 100
(AC) 50/60 Hz 277/480 V [kA]   65   65
(AC) 50/60 Hz 289/500 V [kA]   65   65
(AC) 50/60 Hz 346/600 V [kA]   65   65
(AC) 50/60 Hz 400/690 V [kA]   50   50   50
Short-circuit rating according to UL 508, CSA 22.2
(AC) 50/60 Hz 480 V [kA]     65
(AC) 50/60 Hz 600 V [kA]     65

ABB Short-circuit current limiter 15


Contact us

ABB Schweiz AG In consideration of modification to

2CCC413009B0201  Subject to alterations


CMC Low Voltage Products ­standards and materials, the charac­
Fulachstrasse 150 teristics and overall dimensions indi­
CH-8201 Schaffhausen cated in this catalogue may be binding
Telefon +41 58 586 41 11 only following confirmation by ABB.
Telefax +41 58 586 42 22

www.abb.ch

You might also like