Scribd
Upload
281 views

Bihl Wiedemann Addressing Programming Device

The document describes an AS-i Address Programming Device and its accessories for addressing AS-i slaves. The programming device can address up to 62 slaves, display all slaves on the bus, and read and write slave data. Accessories include an AS-i addressing cable for modules with an infrared interface, and a connecting cable between the programming device and modules. The programming device addresses AS-i slaves according to specifications 2.0, 2.1 and 3.0 using the addressing cable and infrared adapter.

Uploaded by

tad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
281 views

Bihl Wiedemann Addressing Programming Device

The document describes an AS-i Address Programming Device and its accessories for addressing AS-i slaves. The programming device can address up to 62 slaves, display all slaves on the bus, and read and write slave data. Accessories include an AS-i addressing cable for modules with an infrared interface, and a connecting cable between the programming device and modules. The programming device addresses AS-i slaves according to specifications 2.0, 2.1 and 3.0 using the addressing cable and infrared adapter.

Uploaded by

tad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AS-i Address Programming Device

AS-i Address Programming Device


• Addressing/programming max. 62 slaves
• Display of all the slaves in the bus
• Reading and writing slave data
• Addressing of AS-i modules with an optical data interface

Accessories for AS-i Address Programming Device:


• AS-i addressing cable
for addressing of active AS-i modules BW1935
with infrared addressing interface (BW1935)
• Connecting cable
module/programming device (BW1802)

BW1802 BW1191, BW1646

Article no. BW1191: AS-i address programming device with plug-in recharger 230 V
Article no. BW1646: AS-i address programming device with plug-in recharger 115 V (North America)
Article no. BW1935: AS-i addressing cable - infrared addressing adapter
Article no. BW1802: Connecting cable (Module/programming device)

The AS-i address programming device is a compact device for device and an AS-i module. In this case the TTL-signals of the
addressing AS-i slaves such as sensors, actuators and coupling addressing-device are converted into optical signals and vice versa
modules. The AS-i address programming device uses a universal for the AS-i module. The AS-i addressing cable is connected via the
adapter to connect to other devices. The AS-i address programming M12 plug connector at the AS-i address programming device and via
device can be used for AS-i slaves according to the AS-i specifica- the infrared-head at the AS-i module.
tion 2.0, 2.1 and 3.0. The connecting cable (module/programming device) (BW1802)
The AS-i addressing cable (BW1935) is the necessary accessory is used for the addressing of AS-i slaves.
for the signal transmission between the AS-i address programming

Article no. BW1191 BW1646 BW1935 BW1802


Application Commissioning and diagnosis Addressing of AS-i modules Addressing of AS-i modules
Indication LCD, character size is 13 mm -
Buttons keypad, 5 keys -
Interface/connection AS-i, short circuit round connector 2-pin/
infrared head/M12 connector
and overload protected M12 connector
Cable length – – 1m 1,6 m
Supply battery (built-in) -
Recharger plug-in recharger (supplied) -
230 V AC 115 V AC -
Charging time ca. 12 h -
Operating time 8 h ≥ 250 read/write operations with
-
a fully charged battery
Protection category (EN 60529) IP20
Operating temperature 0 °C … +50 °C
Storage temperature -20 °C … +55 °C
Weight approx. 550 g -

Addressing references (Infrared addressing adapter BW1935):


• The power supply must be on during addressing.
• Plug the M12 connector of the IR interface adapter to the relevant connection of the AS-i address programming device.
• Plug the the infrared head of the IR interface adapter onto the AS-i module. Ensure that it is fixed properly to the coding
element.
• Perform addressing as outlined in the description for the AS-i address programming device.

Caution:
• Only the supplied battery recharger may be used for the reloading of the batteries of the AS-i address programming
device. Please pay attention to the land version!

Bihl+Wiedemann GmbH · Floßwörthstr. 41 · D-68199 Mannheim · Phone: (+49) 621/33996-0 · Fax: (+49) 621/3392239 · eMail: [email protected]
www.bihl-wiedemann.de We reserve the right to change any data Mannheim, 13.3.15 page 1

You might also like