Bill of Quantities
Bill of Quantities
Bill of Quantities
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
I .a STRUCTURAL WORKS
I.1 SITEWORKS
1.1 Site Survey (Layout and Stakeout) lot
1.2 Earthworks
a. Excavation m³
b. Trimming m²
c. Hauling and Disposal m³
d. Protection for Adjacent Structure lot
1.3 Backfilling and Compaction m³
1.4 Gravel Bedding (150mm thick) m³
1.5 Dewatering Works lot
1.6 Soil Treatment lot
1.7 Vapor Barrier m²
1.8 Perimeter Fencing lm
1.9 Others (Please specify)
SUB TOTAL A
I.2 CIVIL WORKS
1.1.1 Demolition Works
a. One Level PSA Building lot
b. Guard Quarters lot
c. Guard Outpost lot
d. Walkway with Shed lot
e. Toilet lot
f. Water Tank lot
g. Canteen lot
1.1.2 Removal of Existing Curb l.m.
1.1.3 Removal of Drainage Manholes pcs
1.1.4 Removal of Drainage Pipes lines l.m.
1.1.5 Removal of Streets Ligths with Pole pcs
1.1.6 Removal of Tress
a. Coconut Trees pcs
b. Narra Trees pcs
1.1.7 Clearing and Grubbing HA
1.1.8 Excavation (Surplus common) cu.m.
1.1.9 Embankment cu.m.
1.1.10 Pipe Culvert and Drainage Excavation cu.m.
1.1.11 Subgrade Preparation sq.m.
1.1.12 Subbase and Base courses
a. Aggregate Subbase Course cu.m.
1.1.13 Surface Courses
a. Portland Cement Concrete Pavement (Plain), 230mm thk. sq.m.
1.1.14 Drainage Structures
a. RCP 300mm l.m.
b. RCP 750mm l.m.
c. Area Drain pcs
d. Catch Basin pcs
e. Drainage Manhole pcs
1.1.15 Miscellaneous Structures
a. Curbs and Gutter (Cast in Place) l.m.
b. Cement Concrete Sidewalk sq.m.
1.1.15 Others (Please Specify)
SUB TOTAL B
I.3 CONCRETING WORKS
1.3.1 Footing m³
1.3.2 Footing Tie Beam m³
1.3.3 Retaining Wall m³
1.3.4 Shearwall m³
1.3.5 Slab on Fill/Grade m³
1.3.6 Colums m³
1.3.7 Beams m³
1.3.8 Suspended Slab m³
1.3.9 Stairs m³
1.3.10 Ramp m³
1.3.11 Miscellaneous Concreting m³
1.3.12 Others (Please Specify)
SUB TOTAL C
Page 1 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
SUB TOTAL D
SUB TOTAL E
II ARCHITECTURAL WORKS
II.1.1 1.1 MASONRY
1.1.1 Wall panel - Precast (125mm tk) m²
1.1.1 150mm CHB Wall 2Hr Fire rated (incldg Mortar, Plastering and RSB) m²
1.1.3 150 mm CHB Wall (incldg Mortar, Plastering and RSB) m²
1.1.4 Drip Mould (20mmx20mm) lm
1.1.5 Plastering Works (Interior) m²
1.1.6 Plastering Works (Exterior) m²
1.1.7 Others (Please Specify)
SUB TOTAL A
SUB TOTAL B
1.3.6 Wet Installed 20mm thk Flamed Granite Slab provide Sealer and Finished Granite Slab m²
1.3.7 Others (Please Specify) -
SUB TOTAL C
Page 2 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
1.4.2 12mm thk Moisture Resistant Gypsum Board on Metal Ceiling Joist, Low Sheen Acrylic latex m²
paint finish
1.4.3 600mm x 600mm Regular Acoustic Tiles with Powder Coated Aluminum T-Runners m²
1.4.5 12mm thk Gypsum Board in HPL Metal Fin and 6mm thk Graphicote Glass Panels on Powder m²
Coated Aluminum Framing with 6mm thk Acrylic Diffusers
1.4.6 12mm thk regular Gypsum Board , Low sheen Acrylic latex paint finish m²
SUB TOTAL D
SUB TOTAL E
SUB TOTAL F
SUB TOTAL G
II.1.8 1.8 DOORS, JAMBS AND FINISH HARDWARES (Incldg Hardwares and Accessories)
1.8.1 - D-1 900mm x 2400mm Fire Rated Metal Swing Door in Primed and Automotive Spray Paint set/s
with Vision Panel All in accordance with Architect Specifications.
1.8.2 - D-2 900mm x 2400mm Fire rated Metal Swing Door All in accordance with Architect set/s
Specifications.
1.8.3 - D-3 900mm x 2400mm Hollow Metal Swing Door with louver set/s
1.8.4 - D-4 900mm x 2700mm Tempered Clear Glass Swing door All in accordance with Architect set/s
Specifications.
1.8.5 - D-5 1700mm x 2400mm Framed Glass Double Swing Door All in accordance with set/s
Architect Specifications.
1.8.6 - D-6 1700mm x 2400mm Hollow Metal Double Swing Door with louver set/s
1.8.7 -D-7 2400mmx2400mm Hollow Metal Louvered Double Swing door All in accordance with set/s
Architect Specifications.
SUB TOTAL H
1.9.1.1 W-1 , 1075mm x 2700mm Fixed with Awning type window, 8mm thk Heat- strengthened set/s
Highly Reflective Glass, All in accordance with Architect Specifications.
1.9.1.2 W-2: 5175mm x 2700mm Fixed with Awning type window, 8mm thk Heat- strengthened set/s
Highly Reflective Glass, All in accordance with Architect Specifications.
1.9.1.3 W-3: 2245mm x 2700mm Fixed with Awning type window, 8mm thk Heat- strengthened set/s
Highly Reflective Glass, All in accordance with Architect Specifications.
1.9.1.4 W-4: 3600mm x 3000mm Fixed with Awning type window, 8mm thk Heat- strengthened set/s
Highly Reflective Glass, All in accordance with Architect Specifications.
1.9.1.5 W-5: 21700mm x 2700mm Fixed with Awning type window, 8mm thk Heat- set/s
strengthened Highly Reflective Glass, All in accordance with Architect Specifications.
1.9.1.6 W-6: 4450mm x 3000mm Fixed with Awning type window, 8mm thk Heat- strengthened set/s
Highly Reflective Glass, All in accordance with Architect Specifications.
1.9.1.7 W-7: 10550mm x 3500mm Fixed Window , 12mm thk Cleared Tempered Glass. All in set/s
accordance with Architect Specification.
1.9.1.8 W-8: 6100mm x 3500mm Fixed Window , 12mm thk Cleared Tempered Glass. All in set/s
accordance with Architect Specification.
1.9.1.9 W-9: 10000mm x 3500mm Fixed Window, 12mm thk Cleared Tempered Glass. All in set/s
accordance with Architect Specifications
1.9.1.10 W-10a: 5465mm x 3500mm Fixed Window with 12mm thk Clear Tempered Glass. All in set/s
accordance with Architect Specifications.
1.9.1.11 W-10b: 2750mm x 3500mm Fixed window with 12mm thk Clear Tempered Glass. All in set/s
accordance with Architect Specification.
1.9.1.12 W-11: 2750mm x 3500mm Fixed Window with 12mm thk Clear tempered Glass. All in set/s
accordance with Architect Specifications.
1.9.1.13 W-12: 1085mm x 3500mm Fixed Window with 12mm thk Clear Tempered Glass. All in set/s
accrodance with Architect Specifications.
Page 3 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
1.9.1.14 GF-01 10100mm x 3200mm Storm Aluminum louvers in PVDF Finish (Transformer set/s
Room)
1.9.1.15 GF-02 6200mm x 3200mm Storm Aluminum louvers in PVDF Finish (Transformer set/s
Room)
1.9.1.16 GF-03 3750mm x 3200mm Storm Aluminum louvers in PVDF Finish (Transformer set/s
Room)
1.9.1.17 GF-04 10950mm x 3200mm Storm Aluminum louvers in PVDF Finish (Transformer set/s
Room)
1.9.1.18 5955mm x 2200mm Architectural Louver (Diagonal), PVDF Finish (2F-6F Parking Area) set/s
1.9.1.19 6075mm x 2200mm Architectural Louver , PVDF Finish (2F-6F Parking Area) set/s
1.9.1.20 9650mm x 2200mm Architectural Louver , PVDF Finish (2F-6F Ramp Area) set/s
1.9.1.21 10000mm x 2200mm Horizontal Storm Resistant Louver , PVDF Finish (Driveway) set/s
1.9.1.22 2525mm x 2200mm Horizontal Storm Resistant Louver ,PVDF Finish (2F Generator set/s
and Paralleling Room)
1.9.1.23 10000mm x 2200mm Horizontal Storm Resistant Louver ,PVDF Finish (2F Generator set/s
and Paralleling Room)
1.9.1.24 5955mm x 2200mm Vertical Storm Resistant Louver ,PVDF Finish (2F Generator and set/s
Paralleling Room)
1.9.1.24 22050mm x 2700mm Vertical Storm Resistant Louver ,PVDF Finish (2F Generator and set/s
Paralleling Room)
1.9.1.18 Others (Please specify)
SUB TOTAL I
SUB TOTAL J
SUB TOTAL A
III.2.3 Wires and Cables (Including Fittings, Supports and Hangers and Consumables)
1.0 3.5mm sq. THHN lm/s
2.0 5.5mm sq. THHN lm/s
3.0 8.0mm sq. THHN lm/s
4.0 14mm sq. THHN lm/s
5.0 22mm sq. THHN lm/s
6.0 30mm sq. THHN lm/s
7.0 38mm sq. THHN lm/s
8.0 50mm sq. THHN lm/s
9.0 60mm sq. THHN lm/s
10.0 100mm sq. THHN lm/s
10.0 125mm sq. THHN lm/s
11.0 150mm sq. THHN lm/s
12.0 175mm sq. THHN lm/s
13.0 200mm sq. THHN lm/s
14.0 250mm sq. THHN lm/s
15.0 Others (Please Specify)
SUB TOTAL B
Page 4 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
2.0 1x 36 Watts Flourescent Light pcs
3.0 Emergency Light pcs
4.0 Exit Light pcs
5.0 4x 18 Watts Troffer Light pcs
6.0 Recessed Mounted Light pcs
7.0 Cove Light pcs
8.0 Wall Light pcs
9.0 Flood Light pcs
10. Metal hallide lamp pcs
11.0 Others (Please Specify)
SUB TOTAL C
III.4.1 Panel Boards (According to plans and specifications, complete with accessories and others to
make the equipment fucntionable)
LBS W/POWER FUSE ( Private Pole included) lot
T1 (1500KVA , 34.5KV /400V, 3Ø,60HZ ) Compartmental type assy
T2 (1500KVA , 34.5KV /400V, 3Ø,60HZ )Compartmental type assy
T3 (1000KVA , 34.5KV /400V, 3Ø,60HZ )Compartmental type assy
LVSG 1 PANEL assy
LVSG 2 PANEL assy
LVSG 3 PANEL assy
ATS 1 assy
ATS 2 assy
ATS 3 assy
MCB1 assy
MCB2 assy
MCB3 assy
MDPA assy
PP1 assy
LP1 assy
DP1 assy
PP2 assy
PP3- PP6 (TYPICAL) assy
LP2- LP6 (TYPICAL) assy
DP2 assy
DP3 assy
DP4 assy
DP5 assy
DP6 assy
PP7 assy
LP7 assy
DP7 assy
PP8C assy
PP8 assy
LP8 assy
DP8 assy
PP9 assy
LP9 assy
DP9 assy
PP10 assy
LP10 assy
DP10 assy
PP11C assy
PP11 assy
LP11 assy
DP11 assy
PP12C assy
PP12 assy
LP12 assy
DP12 assy
PP14C assy
PP14 assy
LP14 assy
DP14 assy
PP15C assy
PP15 assy
LP15 assy
DP15 assy
PP16C assy
PP16 assy
LP16 assy
DP16 assy
PP17C assy
PP17 assy
LP17 assy
DP17 assy
PP18 assy
LP18 assy
DP18 assy
PP19C assy
PP19 assy
LP19 assy
DP19 assy
PP20C assy
PP20 assy
LP20 assy
DP20 assy
PP21C assy
PP21 assy
LP21 assy
DP21 assy
PP22C assy
PP22 assy
LP22 assy
DP22 assy
PP23C assy
Page 5 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
PP23 assy
LP23 assy
DP23 assy
PP24 assy
LP24 assy
DP24 assy
MDPSERVA assy
DPSERVAI assy
DPSERVA2 assy
PP SERV 7A assy
PP SERV 8A assy
PP SERV 9A assy
PP SERV 10A assy
PP SERV 11A assy
PP SERV 12A assy
PP SERV 13A assy
PP SERV 14A assy
PP SERV 15A assy
PP SERV 16A assy
PP SERV 17A assy
PP SERV 18A assy
PP SERV 19A assy
PP SERV 20A assy
PP SERV 21A assy
PP SERV 22A assy
PP SERV 23A assy
PP SERV 24A assy
DPPSRTI assy
DPPSRTI 17 assy
SMC 7 assy
PP17FCU assy
PP17 ACCU assy
DPPSRTI 18 assy
PP18 FCU assy
PP18 ACCU assy
DPACCU1 assy
PP7FCU assy
PP7ACCU assy
PP8FCU assy
PP8ACCU assy
PP9FCU assy
PP9ACCU assy
PP10FCU assy
PP10ACCU assy
PP11FCU assy
PP11ACCU assy
PP12FCU assy
PP12ACCU assy
PP14FCU assy
PP14ACCU assy
PP15FCU assy
PP15ACCU assy
MDPB assy
MDPSERVB assy
DPSERVB1 assy
DPSERVB2 assy
PPSERV 7B assy
PPSERV 8B assy
PPSERV 9B assy
PPSERV 10B assy
PPSERV 11B assy
PPSERV 12B assy
PPSERV 13B assy
PPSERV 14B assy
PPSERV 15B assy
PPSERV 16B assy
PPSERV 17B assy
PPSERV 18B assy
PPSERV 19B assy
PPSERV 20B assy
PPSERV 21B assy
PPSERV 22B assy
PPSERV 23B assy
PPSERV 24B assy
DPM assy
PPEF assy
PPSF assy
PPTP assy
LPELEV assy
PPELEV assy
PPPF assy
PPBP assy
DPACCU2 assy
LPU 1 - LPU13 (TYPICAL) assy
PP16FCU assy
PP16ACCU assy
PP19FCU assy
PP19ACCU assy
PP20FCU assy
PP20ACCU assy
PP21FCU assy
PP21ACCU assy
PP22FCU assy
PP22ACCU assy
PP23FCU assy
PP23ACCU assy
PP24FCU assy
PP24ACCU assy
Page 6 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
UPS 200KVA assy
Geneartor 1 ,2812KVA,400V,3Ø,60Hz set
Geneartor 2 ,2812KVA,400V,3Ø,60Hz set
Geneartor 3 ,1587 KVA,400V,3Ø,60Hz set
Generator MCB1 assy
Generator MCB2 assy
Generator MCB3 assy
III.4.2 Others (Please Specify)
SUB TOTAL D
SUB TOTAL E
SUB TOTAL F
SUB TOTAL G
III.8.3 Cabinets with Slide Gutters, Backboards, Briddle Rings, and Terminal Block, etc.
1.0 Main Data Swicth assy
2.0 Patch Panel with Cable Rack Cabinet complete accessories assy
3.0 Others (Please Specify)
SUB TOTAL H
Page 7 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
SUB TOTAL I
III.10.3 Cabinets with Slide Gutters, Backboards, Briddle Rings, and Terminal Block, etc.
1.0 MCTC assy
2.0 CTC assy
3.0 Others (Please Specify)
SUB TOTAL J
SUB TOTAL K
IV PLUMBING WORKS
IV.I PVC PIPES AND FITTINGS
IV.1.1 PVC Series 1000 including Fittings
1.0 250mm Ø l.m.
2.0 200 mm Ø l.m.
3.0 150mm Ø l.m.
4.0100mm Ø l.m.
5.0 50mm Ø l.m.
6.0 75mm Ø l.m.
7.0 Others (Please specify)
IV.I.3 PVC CO
1.0 150mm Ø pc/s
2.0 100mm Ø pc/s
3.0 Others (Please specify)
IV.2.6 Manhole
1.0 600mm x600mm pc/s
2.0 Others (Please specify)
Page 8 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
SUB TOTAL B
SUB TOTAL B
SUB TOTAL D
V MECHANICAL WORKS
V.1 EQUIPMENTS
V.1.1 TOILET EXHAUST FAN
1.0 TEF-1 50W, Exhaust Fan Ceiling Cassete, Direct Type 80CFM, 33, PA, 2.7KW, set/s
230V/1P/60Hz, Complete with Accessories as per specs)
2.0 Others (Please Specify)
V.1.2 EXHAUST VENTILATION FAN (Including Standrad accessories conforming with the plan and
specification)
1.0 EF01 - Pump Room Basement (In Line type, 8800CFM, 25PA, Belt Drive, 0.30KW, set/s
380V/3P/60Hz , Complete with Accessories as per specs)
2.0 JF01 - 2nd,4th,5th,6th Floor (Jet Fan Type, 4300CFM, 13PA, Direct Drive, 0.056KW, set/s
380V/3P/60Hz, Complete with Accessories as per Specs)
3.0 EF02- 2nd ,3rd,4th, 5th, 6th Floor (In line type, 47200CFM, 25PA, Belt Drive, 1.23KW, set/s
380V/3P/60Hz, Complete with Accessories as per specs)
4.0 SF01 -2nd,3rd,4th, 5th, 6th Floor (In line type, 42,862CFM, 25PA, Belt Drive, 1.12KW, set/s
380V/3P/60Hz, Complete with Accessories as per specs)
5.0 SF02- 2nd Floor Parking (In line Type, 3500CFM, 10PA, Belt Drive, 0.018KW, set/s
380V/3P/60Hz, Complete with Accessories as per specs)
6.0 EF03- 2nd Floor Parking (In line Type, 3500CFM, 10PA, Belt Drive, 0.018KW, set/s
380V/3P/60Hz, Complete with Accessories as per specs)
7.0 PF- Roof deck (SWSI Centrifugal type, 16000CFM, 250PA, Belt Drive, set/s
4.17KW,380/3P/60Hz, Complete with Accessories as per specs)
8.0 Others (Please Specify)
FCU-10 (4TR), FCU-11 (4TR), FCU-12 (4TR), FCU-13 (4TR), FCU-23 (3TR), FCU-26 (1.5TR) set/s
Page 9 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
FCU-6 (4TR), FCU-7 (4TR), FCU-8 (4TR), FCU-25 (1.5TR) set/s
7.0 ACCU-2 (9.5R)
FCU-8 (4TR), FCU-9 (4TR), FCU-10 (1.5TR), FCU-29 (1.5TR) set/s
8.0 ACCU-3 (28.5R)
FCU-9 (4TR), FCU-10 (4TR), FCU-11 (4TR), FCU-12 (4TR), FCU-13 (4TR), FCU-14 (4TR), set/s
FCU-15 (4TR), FCU-23 (3TR), FCU-26 (1.5TR)
FCU-12 (4TR), FCU-13 (4TR), FCU-14 (4TR), FCU-15 (4TR), FCU-16 (4TR), FCU-17 (4TR), set/s
FCU-25 (3TR), FCU-29 (1.5TR)
FCU-9 (4TR), FCU-10 (4TR), FCU-11 (4TR), FCU-13 (4TR), FCU-14 (4TR), FCU-25 (1.5TR) set/s
FCU-3 (4TR), FCU-4 (4TR), FCU-5 (4TR), FCU-21 (4TR), FCU-23 (3TR) set/s
FCU-9 (4TR), FCU-10 (4TR), FCU-11 (4TR), FCU-12 (4TR), FCU-13 (4TR), FCU-25 (1.5TR) set/s
FCU-10 (4TR), FCU-11 (4TR), FCU-12 (4TR), FCU-13 (4TR), FCU-14 (4TR), FCU-15 (4TR), set/s
FCU-27 (1.5TR)
FCU-16 (4TR), FCU-17 (4TR), FCU-18 (4TR), FCU-19 (4TR), FCU-20 (4TR), FCU-24 (4TR) set/s
FCU-14 (4TR), FCU-15 (4TR), FCU-16 (4TR), FCU-17 (4TR), FCU-18 (4TR), FCU-19 (4TR), set/s
FCU-20 (4TR), FCU-22 (4TR)
FCU-3 (4TR), FCU-4 (4TR), FCU-5 (4TR), FCU-21 (4TR), FCU-23 (3TR) set/s
FCU-6 (4TR), FCU-7 (4TR), FCU-8 (4TR), FCU- 9 (4TR), FCU-10 (4TR), FCU-11 (4TR), FCU- set/s
30 (1.5TR)
Page 10 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
40.0 ACCU-2 (6TR)
FCU-4 (4TR), FCU-5 (4TR), FCU-6 (4TR), FCU-7 (4TR), FCU-27 (3TR), FCU-28 (1.5TR) set/s
FCU-10 (4TR), FCU-11 (4TR), FCU-12 (4TR), FCU-13 (4TR), FCU-14 (4TR), FCU-15 (4TR), set/s
FCU-16 (4TR), FCU-17 (4TR), FCU-29 (1.5TR)
FCU-14(4TR), FCU-15 (1.5TR), FCU-16 (4TR), FCU-17 (4TR), FCU-18 (4TR), FCU-19 (4TR), set/s
FCU-31 (1.5TR)
FCU-20 (4TR), FCU-21 (4TR), FCU-22 (4TR), FCU-23 (4TR), FCU-28 (4TR) set/s
FCU-6 (4TR), FCU-7 (1.5TR), FCU-8 (4TR), FCU-9 (4TR), FCU-10 (4TR), FCU-27 (1.5TR) set/s
FCU-5 (4TR), FCU-6 (4TR), FCU-7 (4TR), FCU-8 (4TR), FCU-9 (4TR), FCU-10 (4TR), FCU-11 set/s
(4TR), FCU-28 (3TR), FCU-19 (1.5TR)
FCU-13 (4TR), FCU-14 (4TR), FCU-15 (4TR), FCU-16 (4TR), FCU-17 (4TR), FCU-18(4TR), set/s
FCU-19 (4TR), FCU-30 (1.5TR)
FCU-1 (4TR), FCU-2 (4TR), FCU-3 (4TR), FCU-4 (4TR), FCU-27 (4TR) set/s
Page 11 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
74.0 ACCU-3 (20.5TR)
FCU-9 (4TR), FCU-10 (4TR), FCU-11 (4TR), FCU-12 (4TR), FCU-13 (4TR), FCU-26 (1.5TR) set/s
FCU-9 (4TR), FCU-10 (1.5TR), FCU-11 (4TR), FCU-12 (4TR), FCU-13 (4TR), FCU-25 (1.5TR) set/s
FCU-14 (4TR), FCU-15 (4TR), FCU-16 (4TR), FCU-17 (4TR), FCU-22 (4TR) set/s
FCU-14 (4TR), FCU-15 (4TR), FCU-16 (4TR), FCU-17 (4TR), FCU-18 (4TR), FCU-23 (4TR) set/s
FCU-21 (4TR), FCU-22 (4TR), FCU-24 (4TR), FCU-26 (4TR),FCU-27 (4TR), FCU-36 (4TR), set/s
FCU-38 (1.5TR), FCU-39 (1.5TR)
FCU-20 (4TR), FCU-29 (4TR), FCU-30 (4TR), FCU-31 (4TR), FCU-32 (4TR), FCU-33 (4TR) set/s
FCU-11 (4TR), FCU-12 (4TR), FCU-13 (4TR), FCU-14 (4TR), FCU-15 (4TR), FCU-25 (1.5TR), set/s
FCU-26 (1.5TR)
FCU-1 (4TR), FCU-2 (4TR), FCU-3 (4TR), FCU-18 (4TR), FCU-19 (4TR), set/s
FCU-4 (4TR), FCU-5 (4TR), FCU-6 (4TR), FCU-7 (4TR), FCU-20 (3TR), FCU-22 (3TR) set/s
SUB TOTAL D
V.2 PIPES AND FITTINGS, GRILLES, DUCTS AND LOUVERS (Including Consumables, Hangers
and supports)
V.2.1. PVC PIPES (Including Fittings)
V.2.6 Dampers
1.0 Relief Damper, 1500mmx950mm with motorized Actuator set/s
Page 12 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
2.0 Volume Damper 200mmx150mm set/s
3.0 Volume Damper 400mmx350mm set/s
4.0 Others (Please Specify)
SUB TOTAL A
SUB TOTAL B
Page 13 of 14
UNIT COST
ITEM NO. DESCRIPTION QTY UNIT TOTAL AMOUNT
MATERIAL LABOR TOTAL
1.3.3 Sidewall (Extended) pc/s
1.3.4 Upright pc/s
1.3.5 Others (Please Specify)
SUB TOTAL C
SUB TOTAL D
1.5 PUMPS
1.5.1 Fire Pump
Horizontal Split Case, 750 GPM, 220 psi set/s
150 HP, 380V/3P/60Hz
1.5.2 Jockey Pump
Submersible Type, 50 GPM, 220 psi set/s
10 HP, 380V/3P/60Hz
1.5.3 Others (Please Specify)
SUB TOTAL E
Page 14 of 14