Huajing Discrete Devices ○

Silicon N-Channel Power MOSFET

CS4145 A8H

General Description： V DSS 60 V

CS4145 A8H, the silicon N-channel Enhanced ID 84 A
VDMOSFETs, is obtained by the self-aligned planar P D (T C =25℃) 200 W

Technology which reduce the conduction loss, improve R DS(ON)Typ 8.5 mΩ

switching performance and enhance the avalanche energy.

The transistor can be used in various power switching circuit for
system miniaturization and higher efficiency. The package form
is TO-220AB, which accords with the RoHS standard.
Features：
l TrenchFET Power MOSFET
l Low ON Resistance(Rdson≤10mΩ)
l Low Gate Charge (Typical Data:82nC)
l Low Reverse transfer capacitances(Typical:260pF)
l 100% Single Pulse avalanche energy Test
Applications ：
UPS,DC Motor Control and Class D Amplifier.
Absolute （Tc= 25℃ unless otherwise specified）：
Symbol Parameter Rating Units
V DSS Drain-to-Source Voltage 60 V
Continuous Drain Current 84 A
ID
Continuous Drain Current T C = 100 °C 60 A
a1
I DM Pulsed Drain Current 336 A
V GS Gate-to-Source Voltage ±20 V
a2
E AS Single Pulse Avalanche Energy 400 mJ
a1
E AR Avalanche Energy ,Repetitive 40 mJ
a1
I AR Avalanche Current 3 A
a3
dv/dt Peak Diode Recovery dv/dt 5 V/ns
Power Dissipation 200 W
PD
Derating Factor above 25°C 1.33 W/℃
Operating Junction and Storage Temperature
T J ，T stg 175，–55 to 175 ℃
Range

TL MaximumTemperature for Soldering 300 ℃

W U XI C H I N A R E S O U R C E S H U A J I N G M I C R O E L E C T R O N I C S C O . , LT D . Page 1 of 10 2 0 11
 Huajing Discrete Devices ○
R CS4145 A8H

Electrical Characteristics（Tc= 25℃ unless otherwise specified）：

OFF Characteristics
Rating
Symbol Parameter Test Conditions Max Units
Min. Typ.
.
Drain to Source Breakdown
V DSS Voltage
V GS =0V, I D =250µA 60 -- -- V

Δ BV D SS / Δ
Bvdss Temperature Coefficient ID=250uA,Reference25℃ -- 0.15 -- V/℃
TJ
V DS = 60V, V GS = 0V,
T a = 25℃ -- -- 1
I DSS Drain to Source Leakage Current V DS =48V, V GS = 0V, µA
T a = 125℃ -- -- 10

I GSS(F) Gate to Source Forward Leakage V GS =+20V -- -- 100 nA

I GSS(R) Gate to Source Reverse Leakage V GS =-20V -- -- -100 nA

ON Characteristics
Rating
Symbol Parameter Test Conditions Units
Min. Typ. Max.
R DS(ON ) Drain-to-Source On-Resistance V GS =10V,I D =42A -- 8.5 10 mΩ
V GS(TH) Gate Threshold Voltage V D S = V GS , I D = 250µA 2 4 V
Pulse width tp≤380µs,δ≤2%

Dynamic Characteristics
Rating
Symbol Parameter Test Conditions Units
Min. Typ. Max.
g fs Forward Transconductance V DS =30V, I D =84A -- 65 -- S
C iss Input Capacitance -- 5785 --
V GS = 0V V DS =25V
C oss Output Capacitance f = 1.0MHz -- 375 -- pF
C rss Reverse Transfer Capacitance -- 260 --

Resistive Switching Characteristics

Rating
Symbol Parameter Test Conditions Units
Min. Typ. Max.
t d(ON ) Turn-on Delay Time -- 18 --
tr Rise Time I D =42A V DD =30V -- 75 --
V GS = 10V R G =4.7Ω ns
t d(OFF) Turn-Off Delay Time -- 54 --
tf Fall Time -- 32 --
Qg Total Gate Charge -- 82 --
I D =84A V DD =30V
Q gs Gate to Source Charge V GS = 10V -- 30 -- nC
Q gd Gate to Drain (“Miller”)Charge -- 22 --

W U XI C H I N A R E S O U R C E S H U A J I N G M I C R O E L E C T R O N I C S C O . , LT D . P a g e 2 o f 1 0 2 0 11
 Huajing Discrete Devices ○
R
CS4145 A8H

Source-Drain Diode Characteristics

Test Rating
Symbol Parameter Units
Conditions Min. Typ. Max.
IS Continuous Source Current (Body Diode) -- -- 84 A
I SM Maximum Pulsed Current (Body Diode) -- -- 336 A
V SD Diode Forward Voltage I S =84A,V GS =0V -- -- 1.5 V
trr Reverse Recovery Time I S =84A,T j = 25°C -- 65 -- ns
dI F /dt=100A/us,
Qrr Reverse Recovery Charge V GS =0V -- 120 -- nC
Pulse width tp≤380µs,δ≤2%

Symbol Parameter Typ. Units

R θ JC Junction-to-Case 0.75 ℃/W
R θ JA Junction-to-Ambient 62 ℃/W

a1
： Repetitive rating; pulse width limited by maximum junction temperature
a2
： L=0.27mH, I D =54A, Start T J =25℃
a3
： I SD =84A,di/dt ≤ 100A/us,V DD ≤ BV DS, Start T J =25℃

W U X I C H I N A R E S O U R C E S H U A J I N G M I C R O E L E C T R O N I C S C O . , LT D . P a g e 3 o f 1 0 2 0 11
 Huajing Discrete Devices ○
R
CS4145 A8H

Characteristics Curve：

W U X I C H I N A R E S O U R C E S H U A J I N G M I C R O E L E C T R O N I C S C O . , LT D . P a g e 4 o f 1 0 2 0 11
 Huajing Discrete Devices ○
R
CS4145 A8H

W U X I C H I N A R E S O U R C E S H U A J I N G M I C R O E L E C T R O N I C S C O . , LT D . P a g e 5 o f 1 0 2 0 11
 Huajing Discrete Devices ○
R
CS4145 A8H

W U X I C H I N A R E S O U R C E S H U A J I N G M I C R O E L E C T R O N I C S C O . , LT D . P a g e 6 o f 1 0 2 0 11
 Huajing Discrete Devices ○
R
CS4145 A8H

TestCircuitandWaveform

W U X I C H I N A R E S O U R C E S H U A J I N G M I C R O E L E C T R O N I C S C O . , LT D . P a g e 7 o f 1 0 2 0 11
 Huajing Discrete Devices ○
R
CS4145 A8H

W U X I C H I N A R E S O U R C E S H U A J I N G M I C R O E L E C T R O N I C S C O . , LT D . P a g e 8 o f 1 0 2 0 11
 Huajing Discrete Devices ○
R
CS4145 A8H

Package Information

Values(mm)
Items
MIN MAX
A 10.10 10.50
B 15.0 16.0
B1 8.30 9.10
C 4.30 4.80
C1 2.30 3.00
D 1.20 1.40
E 0.70 0.90
F 0.35 0.55
G 1.17 1.37
H 3.30 3.80
L 12.7 14.7
N 2.34 2.74
Q 2.40 3.00
3.70 3.90

TO-220AB Package
W U X I C H I N A R E S O U R C E S H U A J I N G M I C R O E L E C T R O N I C S C O . , LT D . P a g e 9 o f 1 0 2 0 11
 Huajing Discrete Devices ○
R
CS4145 A8H

The name and content of poisonous and harmful material in products

hazardous substance
Part’s Name Pb Cr(VI) PBB PBDE
Hg Cd
Limit ≤0.1% ≤0.1% ≤0.01% ≤0.1% ≤0.1% ≤0.1%

Lead Frame ○ ○ ○ ○ ○ ○
Molding ○ ○ ○ ○ ○ ○
Compound
Chip ○ ○ ○ ○ ○ ○
Wire Bonding ○ ○ ○ ○ ○ ○
Solder × ○ ○ ○ ○ ○
○：means the hazardous material is under the criterion of SJ/T11363-2006.
×：means the hazardous material exceeds the criterion of SJ/T11363-2006.
Note
The plumbum element of solder exist in products presently, but within the
allowed range of Eurogroup’s ROHS.

Warnings
1. Exceeding the maximun ratings of the device in performance may cause damage to the
device, even the permanent failure, which may affect the dependability of the machine. It is
suggested to be used under 80 percent of the maximun ratings of the device.
2. When installing the heatsink, please pay attention to the torsional moment and the
smoothness of the heatsink.
3. VDMOSFETs is the device which is sensitive to the static electricity, it is necessory to protect the device
from being damaged by the static electricity when using it.
4. This publication is made by Huajing Microelectronics and subject to regular change without notice.

W U XI C H I N A R E S O U R C E S H U A J I N G M I C R O E L E C T R O N I C S C O . , LT D

Add： No.14 Liangxi RD. Wuxi, Jiangsu, China Mail：214061 http://www. crhj.com.cn
Tel: 0510-85807228 Fax: 0510-85800864

Marketing Part： Post：214061 Tel / Fax：0510-85807228-3663/5508

E-mail：[email protected] 0510-85800360（Fax）

Application and Service：Post：214061 Tel / Fax：0510-85807228-3399 / 2227

E-mail：[email protected]

W U X I C H I N A R E S O U R C E S H U A J I N G M I C R O E L E C T R O N I C S C O . , LT D . P a g e 1 0 o f 1 0 2 0 11